Rather than stuffing the command line with a bunch of -D flags, start
moving things to config.h which is managed by autoheader. This makes
the makefile a bit simpler and the build output tighter, and it makes
the migration to automake easier as there are fewer vars to juggle.
We'll want to move the other options out too, but it'll take more work.
This was imported from the ppc sim, but that was only used to control
a single file, and that is already governed by the hw models. There's
no need to have a sep configure option here, especially since none of
the other sims are using it. Even when the code is enabled, there's
no runtime overhead.
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in
order to make the configure flag available. There's no real reason
to not allow this flag for all ports, so move it to the common sim
macro. This way we get standard behavior across all ports too.
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order
to make the configure flag available, which none of them do. There's
no real reason to not allow this flag for all ports, so move it to the
common sim macro. This way we get standard behavior across all ports.
We don't have alternative nltvals.def files, so always symlinking
the targ-vals.def file to it doesn't gain us anything. It does
make the build more complicated though and a pain to convert to
something newer (like automake). Drop the symlinking entirely.
In the future, we'll want to explode this file anyways into the
respective arch dirs so things can be selected dynamically at
runtime, so it's not like we'll be bringing this back.
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order
to make the configure flag available. There's no real reason to not
allow this flag for all ports, so move it to the common sim macro.
This way we get standard behavior across all ports too.
These options were never exposed for most sims (just the ppc one),
and they are really only useful on 32-bit x86 systems. Considering
modern systems tend to be 64-bit x86_64 and how well modern compilers
are at optimizing code, these have outlived their usefulness.
No other sub directory provides such a configuration option, so
drop it from the sim dir as well. This cleans up a good bit of
code in the process.
If people want to use custom flags for just the sim, they can
still run configure+make by hand in the sim subdir and use the
normal CFLAGS settings.
The common subdir sets up a cconfig.h file to hold checks for the common
code. In practice, most files still end up using config.h instead which
just leads to confusion.
Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON
so we can drop the cconfig.h file altogether. Now there is only a single
config.h file like normal.
The compiler/C library should produce reasonable code for htonl/ntohl,
and at least glibc tries pretty hard to always produce good code for
them. This logic only had support for 32-bit x86 systems anymore, and
it's unlikely people were even opting into this, so drop it all.
Fix a long standing todo where we let getopt write directly to stderr
when an invalid option is passed. Use the sim io funcs instead as they
go through the filtered callbacks that gdb wants.
The --enable-sim-hostendian flag was purely so people had an escape route
for when cross-compiling. This is because historically, AC_C_BIGENDIAN
did not work in those cases. That was fixed a while ago though, so we can
require that macro everywhere now and simplify a good bit of code.
Rather than re-invent endian defines, as well as maintain our own list
of OS & arch-specific includes, punt all that logic in favor of the bfd
ones already set up and maintained elsewhere. We already rely on the
bfd library, so leveraging the endian aspect should be fine.
Pretty much all targets are using this module already, so add it to the
common list of objects. The only oddball out here is cris and that's
because it supports loading via an offset for all the phdrs. We drop
support for that.
No arch is using this anymore, and we want all new ports using the
hardware framework instead. Punt WITH_DEVICES and the two callbacks
device_io_{read,write}_buffer.
We can also punt the tconfig.h file as no port is using it anymore.
This fixes in-tree builds that get confused by picking up the wrong
one (common/ vs <port>/) caused by commit ae7d0cac8c.
Any port that needs to set up a global define can use their own
sim-main.h file that they must provide regardless.
Now that all arches (for the most part) have moved over, move sim-stop.o,
sim-reason.o, and sim-reg.o to the common object list and out of all the
arch ports.
This avoids using global variables to hold the cpu state so we can
better integrate with the sim common code.
There's also a minor fix here where we move the pc register back into
the state that is accessible by the asints array. When it was pulled
out previously, the reg store/fetch functions broke, but no one really
noticed as the mcore gdb port was dropped a while back.
This is not entirely useful as mcore doesn't (yet) store its register
state in the cpu state, but it does allow for switching to the common
code for these functions.
Other than the nice advantage of all sims having to declare one fewer
common function, this also fixes leakage in pretty much every sim.
Many were not freeing any resources, and a few were inconsistent as
to the ones they did. Now we have a single module that takes care of
all the logic for us.
Most of the non-cgen based ones could be deleted outright. The cgen
ones required adding a callback to the arch-specific cleanup func.
The few that still have close callbacks are to manage their internal
state.
We do not convert erc32, m32c, ppc, rl78, or rx as they do not use
the common sim core.
Many ports have the same sim syscall logic, so add some helpers to handle
all the common details. The arches still have to deal with the unpacking
and packing of the syscall arguments, but the rest of the sim<->callback
glue is now shared.
These printf statements are showing "word" objects which are typedefed
from long, so make sure to use l with %x when printing them to avoid
warnings from gcc.
Re-use the existing memory core that handles reads/writes.
The verbose command is converted to the common --verbose flag
since only a few call sites use it now.
In preparation for converting to the common memory framework, the custom
commands get in our way. But when we realize that gdb support has been
dropped for mcore, it makes things a bit easier: the main runner does not
let you run arbitrary commands once simulation starts.
So lets disable watchpoint support until it can be converted to the common
watchpoint logic. There's already an ifdef to let us do that.
We straight up drop support for the dumpmem command (no other sim supports
this, and if it's a feature people want, we can add a common func) and the
clearstats command (not a big deal -- just restart your simulation).
We leave in place the verbose check points as a follow up commit will cut
that over to common logic.
Now that libgloss has a header tracking the syscalls for this arch, we
can update the database to include it for the symbolic constants/maps.
Then we can switch the mcore syscall callbacks over to the common ones.
Since every target typedefs this the same way, move it to the common code.
We have to leave Blackfin behind here for now because of inter-dependencies
on types and headers: sim-base.h includes sim-model.h which needs types in
machs.h which needs types in bfim-sim.h which needs SIM_CPU.
Almost every target defines sim_cia the same way -- either using the
address_word type directly, or a type of equivalent size. The only
odd one out is sh64 (who has 32bit address_word and 64bit cia), and
even that case doesn't seem to make sense. We'll put off clean up
though of sh64 and at least set up a sensible default for everyone.
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET}
except the latter adds a layer of indirection via the sim state. This
lets models set up different functions at runtime and doesn't reach so
directly into the arch-specific cpu state.
It also doesn't make sense to have two sets of macros that do exactly
the same thing, so lets standardize on the one that gets us more.
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the
cpu state is multicore, and the STATE_CPU defines match, we can move
it all to the common code.
The mcore port had a few structs/defines that were never used.
Similarly, the microblaze port, because it was copied from mcore, has
that same dead code, and more. The watchpoint logic was never actually
used. Punt it all.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
The sbrk syscall assumes the sbrk region starts after the bss and the
current implementation requires a bss section to exist. Since there
is no requirement for programs to have a bss in general, we want to
drop this check. However, there is still the sbrk syscall that wants
to know about the region.
Since libgloss doesn't actually use the sbrk syscall (it implements
sbrk in its own way), and the sim really shouldn't enforce a specific
memory layout on programs, lets simply delete sbrk support. Now it
always returns an error.
Rather than manually include tconfig.h when we think we'll need it (which
is error prone as it can define symbols we expect from config.h), have it
be included directly by config.h. Since we know we have to include that
header everywhere already, this will make sure tconfig.h isn't missed.
It should also be fine as tconfig.h is supposed to be simple and only set
up a few core defines for the target.
This allows us to stop symlinking it in place all the time and just use
it straight out of the respective source directory.
We want people to stop using the run.c frontend, but it's hard to notice
when it's still set as the default. Lets flip things so nrun.c is the
default, and users of run.c will get an error by default. We turn that
error into a warning for existing sims so we don't break them -- this is
mostly meant for people starting new ports.
These look like left over hacks from the days where we had to protect
ourselves from the compiler and C library. None of these checks are
relevant, and we have common configure logic to do header tests. Punt
them all now.
