* blockframe.c (get_prev_frame_info): If INIT_FRAME_PC_FIRST is
set, run it before INIT_EXTRA_FRAME_INFO.
* stack.c (frame_info): If PRINT_EXTRA_FRAME_INFO defined, call it.
* mips-tdep.c (init_extra_frame_info): Only clobber the `frame'
(FP) value in the frame_info struct if it is zero (as from top of
execution stack).
(setup_arbitrary_frame): Implement FRAME_SPECIFICATION_DYADIC.
* mips-xdep.c (fetch_inferior_registers): ZERO_REGNUM always
comes back as zero. So does FP_REGNUM, as a trigger for
init_extra_frame_info.
* tm-mips.h (INIT_FRAME_PC_FIRST): Kludge, FIXME, defined to get
the program counter set before INIT_EXTRA_FRAME_INFO is run.
(INIT_FRAME_PC): Defined to null.
(PRINT_EXTRA_FRAME_INFO): print frame pointer location via symtab.
(FRAME_SPECIFICATION_DYADIC): Ask for two args in frame command.
Briefly explain MIPS stacks in GDB.
Rich and I believe the "real problem" was that both single_step
and target_resume were issuing PT_CONTINUE calls. This would
cause the second PT_CONTINUE to sometimes fail because the process
was already running.
* infptrace.c (child_resume): Remove AIX_BUGGY_PTRACE_CALL kludge.
* infptrace.c (child_resume): Don't deal with NO_SINGLE_STEP
here; it is dealt with at a gdb-target-independent level.
* rs6000-tdep.c (single_step): Don't call ptrace, we are a
high toned routine. Fix return type to void.
before printing anything, and again afterward. Fix comments.
(vfprintf_filtered): Eliminate static buffer; use auto buffer,
or alloca() if needed.
* rs6000-xdep.c: Use correct conditional (IBM6000_TARGET) to
detect native versus cross-host.
termination condition.
(full_filename): Don't prepend dirname if filename begins with /.
(breakpoint_notify, kernel_dispatch): Deal with DynamicLoad
messages properly!!
(getpty (NCR)): Lotsa bug fixes...
(kernel_dispatch (case StopRType)): Use kill() instead of
killpg() so we can deal with losing systems...
(wait_for_events): Work around NCR select() lossage. It doesn't
zero out readfds when select() returns zero.
(energize_initialize): Use I_SETSIG to get SIGIO interrupts. Use
getcwd() instead of getwd() (NCR getwd() seg faults).
(energize_wait): Use sigaction() for NCR. Their version of signal()
is unreliable by default.
places where we must notify kernel of where the given pc is.
(cplus_demangle): Put single-quotes around demangled names.
(energize_call_command): Call send_location() after doing up,
down, and frame commands.
(REGISTER_U_ADDR): Fix up for Ultrix 4.2.
* tm-tahoe.h, xm-tahoe.h (KERNEL_U_ADDR): Move macro to xm-tahoe.h.
* stack.c (_initialize_stack): "dow" should be a valid abbreviation
for "down". Suggested by Richard Stallman.
* infptrace.c: HP/Apollos have ptrace.h in the wrong place.
* remote-st2000.c: Massive changes to use new serial package.
Also added 'connect' command to transparantly connect to serial
port.
* ser-termios.c: Big cleanup, use nicer coding conventions.
* ser-bsd.c: New module, serial stuff for BSD systems.
* serial.h: Define struct ttystate properly using HAVE_TERMIO.
* xm-apollo68b.h: #define PTRACE_IN_WRONG_PLACE...
* serial.h (EXFUN): Remove all uses, convert to PARAMS.
* config/sun4os4.mh: Include ser-termios.o. FIXME, all .mh files
should include a ser-XXX.o module.
* dbxread.c (elfstab_build_psymtabs): Remove DEFUN crap.
* defs.h, i960-pinsn.c, remote-hms.c: Replace CONST with simple const.
* configure.in: Map unrecognized sun 68k's, sun sparcs, into
known suns in configure.in, rather than mapping them to unique
config files that happen to duplicate other config files.
* config/sun3.{mh,mt}: Remove (use identical sun3os4.*).
* config/sun4.{mh,mt}: Remove (use identical sun4os4.*).
sub-variants of SunOS, e.g. sunos4* to match sunos4.1.1.
(sparc-*-sunos3): Remove host & target. Sunos3 never shipped
in production on Sun-4.
({a29k,i[34]86,i960}-*-elf): Add targets, equivalent to coff.
(m68k-*-{aout,coff,elf}): Add targets, w/new config and tm files.
(sparc-*-{aout,coff,elf}): Add targets, w/new config and tm files.
* tm-68k-un.h, tm-68k-noun.h, tm-spc-un.h, tm-spc-noun.h: New
target definitions for embedded with and without underlines on
identifiers. FIXME -- this ought to be known by BFD instead.
* tm-sparc.h, tm-sun2.h, tm-sun3.h: Delete NAMES_HAVE_UNDERSCORE:
not a parameter of the CPU, but of the development environment.
* tm-es1800.h, tm-sunos.h, tm-vx68.h: Add NAMES_HAVE_UNDERSCORE.
language for current compilation unit being processed.
* dwarfread.c (set_cu_language): New local function to decode
and record language for current compilation unit being processed.
* dwarfread.c (synthesize_typedef): Add local function to
synthesize a typedef for C++ classes, structs, unions, and
enumerations.
* dwarfread.c (read_structure_scope): Synthesize typedefs
for C++ classes, structs and unions.
* dwarfread.c (read_enumeration): Synthesize typedefs for
C++ enumerations.
* dwarfread.c (read_file_scope): Call set_cu_language to
record language for current compilation unit. After symtab
is built, save this recorded language.
* dwarfread.c (process_dies, add_partial_symbol, struct_type,
scan_partial_symbols, new_symbol): Recognize TAG_class_type.
* dwarfread.c (add_partial_symbol): Synthesize partial symbol
typedefs for C++ classes, structs, unions, and enumerations.
* dwarfread.c (scan_compilation_units): Call set_cu_language
to record language for current compilation unit.
* dwarfread.c (scan_partial_symbols): Call add_enum_psymbol here
for TAG_enumeration_types, rather than in add_partial_symbol.
* dwarfread.c (add_partial_symbol): Combine TAG_enumeration_type
case with class, struct, and union type cases, now that they are
the same. Remove tests for non-NULL name attributes, now done
by callers.
* gdbtypes.h (TYPE_CODE_CLASS): Add type for C++ classes, but
treat as alias for TYPE_CODE_STRUCT for now.
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset):
Use "regi" for local indexing through register numbers, reserving
"regno" for the name of a specific register passed as an input
parameter. Fix bug propagated through all versions that sometimes
used regno as an index when it should have been regi, thus using
-1 as an index in some cases.
respectively, so same demangler can be used by other programs.
* Makefile.in: Remove demangler stuff.
* Makefile.in (depend): Pass -I../readline (needed for main.c).
* demangle.c (_initialize_demangler): Tell demangler which
CPLUS_MARKER to assume.
follow the consistent pattern of struct work_stuff pointer first,
followed by pointer into string being demangled, followed by
pointer to the string where the result is being stored, followed
by other args. Also generally replace most variables of name
"type" with "mangled" for consistency. They all pointed to the
same string but half were one name and half the other.
* cplus-dem.c (LONGERNAMES): Remove #ifndef's.
* cplus-dem.c (demangle_qualified): Rewrite to clean up and allow
use whenever a qualified name is being demangled.
* cplus-dem.c (do_type): Qualified names are treated similarly
to fundamental types, not as modifiers of fundamental types.
numbers, signal number ranges, and to recognize "all" to mean all
signals except those used by the debugger.
* infrun.c (SET_SIGS, UNSET_SIGS): Macros used in handle_command
to set or reset actions for specific signals.
