(DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
* xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
remove tadj.
* exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
tstart and dstart with section VMA.
* rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
object file.
(vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
(vmap_exec): Relocate relative to the VMA in the object file,
relocate .bss section as well.
(xcoff_relocate_core): No longer adjust section addresses by VMA.
* rs6000-tdep.c (find_toc_address): Change type of tocbase
to CORE_ADDR.
* xcoffread.c (secnum_to_bfd_section): New routine to get
BFD section from CS section number.
(scan_xcoff_symtab): Make toc_offset section relative.
* symtab.c (total_number_of_methods): Avoid core dump if
baseclass type is still undefined.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
* Makefile.in (ALL_EMULATIONS): Add ealphabsd.o.
(ealphabsd.c): New rule.
* configure.host (alpha-*-bsd): New target.
* configure.tgt (alpha-*-bsd): New target.
* emulparams/alphabsd.sh: New file for *BSD/alpha.
* scripttempl/alphabsd.sc: New file for *BSD/alpha.
but with an added LITERALSLEAZY entry.
(alpha_adjust_reloc_in): Add handling of LITERALSLEAZY relocs. Use
info on the howto_table gotten from the ecoff_backend data.
(alpha_ecoff_get_relocated_section_contents): Ditto.
(alpha_bfd_reloc_type_lookup): Ditto.
(alpha_relocate_section): Ditto. Also remove an assertion
causing failures on *BSD/alpha systems.
(alpha_ecoff_backend_data): Addition of fields to handle different
howto tables as well as a has_literalseazy flag.
(bsd_alpha_ecoff_backend_data): New backend data structure for *BSD.
(bsd_ecoffalpha_little_vec): Define.
* coff-mips.c (MIPS_HOWTO_COUNT): Removed, it's unused.
(mips_adjust_reloc_in): Use new ecoff_backend data to get at the howto
table.
(mips_bfd_reloc_type_lookup): Ditto.
(mips_relocate_section): Ditto.
(mips_ecoff_backend_data): Addition of fields to handle different
howto tables as well as a has_literalseazy flag.
* config.bfd: (alpha-*-openbsd*): New target.
* configure.in (alpha*-*-openbsd*): New target.
(bsd_ecoffalpha_little_vec): New vector for *BSD/Alpha ECOFF.
* ecoff.c (_bfd_ecoff_set_arch_mach_hook): Handle new magic.
(ecoff_get_magic): Ditto.
* libecoff.h (ecoff_backend_data): Addition of fields to handle
different howto tables as well as a has_literalseazy flag.
* reloc.c: BFD_RELOC_ALPHA_LITERALSLEAZY): New reloc.
* targets.c (bsd_ecoffalpha_little_vec): Declare.
(bfd_target_vector): Include the bsd_ecoffalpha_little_vec target.
* configure, bfd-in2.h, libbfd.h: Rebuild.
o Provide poll_quit callback to simulators
so that they can poll for SIGINT on
clueless OS's.
o Add sim_stop to simulators so that clients
can request a halt (eg gdbtk's STOP button)
Works for PPC!
o Re-arange remote-sim.c so that the
hard work is moved from gdbsim_resume()
to gdbsim_wait() (where it should be).
(struct elf_i386_link_hash_entry): Define.
(struct elf_i386_link_hash_table): Define.
(elf_i386_link_hash_traverse): Define.
(elf_i386_hash_table): Define.
(elf_i386_link_hash_newfunc): New static function.
(elf_i386_link_hash_table_create): New static function.
(elf_i386_check_relocs): If linking with -Bsymbolic, don't copy
PC relative relocs for a global symbol defined in a regular
object, and count the number of PC relative relocs copied for any
global symbol.
(elf_i386_size_dynamic_sections): If linking with -Bsymbolic,
traverse with elf_i386_discard_copies.
(elf_i386_discard_copies): New static function.
(bfd_elf32_bfd_link_hash_table_create): Define.
* interp.c (target_byte_order): Delete.
(sim_kind, myname, little_endian_p): New static locals.
(init_pointers): Use little_endian_p instead of target_byte_order.
(sim_resume): Likewise.
(sim_open): Set sim_kind, myname. Set little_endian_p from -E arg.
(sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
load file into simulator. Set start address from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
* interp.c: #include bfd.h.
(target_byte_order): Delete.
(sim_kind, myname, big_endian_p): New static locals.
(sim_open): Set sim_kind, myname. Move call to set_endianness to
after argument parsing. Recognize -E arg, set endianness accordingly.
(sim_load): Return SIM_RC. New arg abfd. Call sim_load_file to
load file into simulator. Set PC from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
(set_endianness): Use big_endian_p instead of target_byte_order.
* compile.c (sim_kind, myname): New static locals.
(sim_open): Set sim_kind, myname.
(sim_load): Return SIM_RC. New arg abfd. Update test for h8300h.
Call sim_load_file to load file into simulator. Set start address
from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
(start_address): New static local.
(sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
