sh-linux-gnu-gcc (...) src/gdb/gdbserver/linux-low.c
.../src/gdb/gdbserver/linux-low.c: In function 'linux_read_loadmap':
.../src/gdb/gdbserver/linux-low.c:5284:13: error: 'struct lwp_info' has no member named 'entry'
make[1]: *** [linux-low.o] Error 1
gdb/gdbserver/
2014-04-09 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_read_loadmap): Pass current_inferior directly
to lwpid_of.
Due to a thinko, a message could be not understood and ignored. The result
was a dead-lock (gdb is waiting for an event that never happen). The port
of the thread was deallocated before new threads are discovered. As a
consequence, the origin of the message was unknown (instead of being
linked to the newly created thread).
gdb/
* darwin-nat.c (darwin_check_new_threads): Fix port leak, add
comments.
(darwin_decode_exception_message): Free port only after use.
One last time-stamp. Now none of the doc rules using move-if-change
will run unnecessarily.
* Makefile.am ($(MKDOC)): New rule, depend on chew.stamp. Move
old rule to..
(chew.stamp): ..here.
(DISTCLEANFILES): Move *.stamp..
(MOSTLYCLEANFILES): ..to here.
* Makefile.in: Regenerate.
I got tired of watching chew.c being compiled a dozen or more times
each time I do a binutils build.
* Makefile.am (MKDOC): Use $@ in command.
(aoutx.texi): New rule, depend on aoutx.stamp. Move old rule..
(aoutx.stamp): .. to here. Don't depend on chew.c, depend on MKDOC
and omit recursive MAKE. Use $< in command.
(archive.texi, archures.texi, bfdt.texi, cache.texi, coffcode.texi,
core.texi, elf.texi, elfcode.texi, mmo.texi, format.texi, libbfd.texi,
bfdio.texi, bfdwin.texi, opncls.texi, reloc.texi, section.texi,
syms.texi, targets.texi, init.texi, hash.texi, linker.texi): Similarly.
(DISTCLEANFILES): Remove *.stamp.
* Makefile.in: Regenerate.
I got the ppc476 workaround wrong. bctr (and bctrl) as the last
instruction in a page can hit the icache bug if the preceding mtctr
insn is close by, and the destination is in the first few instructions
on the next page. This scenario can occur with code generated by gcc
to implement switch statements, or in code generated to call by
function pointer.
To prevent the bctr problem it is also necessary to remove other
instructions that otherwise would be safe.
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Remove bctr from list
of safe ppc476 insns at end of page. Also remove non-branch insns.
Expand comments.
ld/
* emultempl/ppc32elf.em (no_zero_padding, ppc_finish): New functions.
(LDEMUL_FINISH): Define.
* avr-tdep.c (struct gdbarch_tdep): Mention avrxmega in the comment.
(avr_gdbarch_init): Add xmega architectures given by bfd_architecture
when setting the size of call_length.
the Cygwin and MinGW targets. The manifest is now going to be handled by gcc.
* scripttempl/pe.sc (R_RSRC): Remove default manifest.
* scripttempl/pep.sc (R_RSRC): Remove default manifest.
On mingw host, we have seen two fails as below,
p int1dim[0]^V@2
Invalid character '^V' in expression.
(gdb) FAIL: gdb.base/printcmds.exp: p int1dim[0]@2
p int1dim[0]^V@2^V@3
Invalid character '^V' in expression.
(gdb) FAIL: gdb.base/printcmds.exp: p int1dim[0]@2@3
In the test, the comment says "# Send \026@ instead of just @ in case
the kill character is @". Historically, kill character was @, and
Ctrl-V (\026) is to escape the next character. However, we don't have
to do so on mingw. This patch is to disable ctrl-v usage on mingw
hots. With this patch applied, it becomes:
p int1dim[0]@2
$607 = {0, 1}
(gdb) PASS: gdb.base/printcmds.exp: p int1dim[0]@2
p int1dim[0]@2@3
$608 = {{0, 1}, {2, 3}, {4, 5}}
Note that this patch is picked from Pierre's submission,
[RFC 6/6] Fix remaining failures in gdb.base/printcmds.exp for mingw hosts.
https://www.sourceware.org/ml/gdb-patches/2013-09/msg00943.html
gdb/testsuite:
2014-04-08 Pierre Muller <muller@sourceware.org>
* gdb.base/printcmds.exp (test_artificial_arrays): Disable
Ctrl-V use for mingw hosts.
gdb.Value.dynamic_type is supposed to work for reference and pointer
values. However, the value object in the function 'valpy_get_dynamic_type'
was being dereferenced using 'value_ind' irrespective of the value type
being TYPE_CODE_PTR or TYPE_CODE_REF. This patch fixes that to use
'coerce_ref' for TYPE_CODE_REF values.
ChangeLog:
* python/py-value.c (valpy_get_dynamic_type): Use coerce_ref to
dereference TYPE_CODE_REF values.
testsuite/
* gdb.python/py-value.c: Improve test case.
* gdb.python/py-value.exp: Add new test.
All strip operations require section headers to be present, as do most
objcopy operations. BFD is seriously confused by objects without
section info. The error message added here is similar to the error
on attempting to strip/objcopy a zero length object.
PR binutils/16811
* objcopy.c (copy_object): Error if no sections.
The testcase in pr16417 comment #6 produces a map file showing
libpthread.so.0 (write@@GLIBC_2.2.5)
ie. missing the file referencing the symbol.
* elflink.c (_bfd_elf_add_default_symbol): Pass poldbfd when
merging non-default sym.
The linker script documentation does not mention the optional comma
that may follow an output section command or an overlay command.
In some cases, where a fill expression is used, and the next
output section command begins with an operator (e.g., "/DISCARD/"),
the comma may be required to separate the two commands.
Currently, GNU ld doesn't require the comma, but gold does.
ld/
PR gold/16804
* ld.texinfo: Document optional comma following output section
command and overlay command.
bfd/
* mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out): Use target index
of output_section.
* mach-o-x86-64.c (bfd_mach_o_x86_64_swap_reloc_out): Ditto.
When aligning input sections, we are supposed to take the fill pattern
from a FILL statement, if there is one in the output section statement.
ld/
* ldlang.c (lang_size_sections_1 <lang_input_section_enum>): Use
current "fill", not "output_section_statement->fill".
ld/testsuite/
* ld-scripts/fill.d, * ld-scripts/fill.t, * ld-scripts/fill_0.s,
* ld-scripts/fill_1.s, * ld-scripts/fill_2.s: New test.
* ld-scripts/data.exp: Run it.
section before dereferencing.
(pe_print_idata, pe_print_edata, pe_print_reloc)
(rsrc_print_section): Don't bother interpreting the contents
of sections which have no contents.
long type instead of long long meant that bfd_seek (SET) could be called with a
negative offset.
PR ld/16803
* elf.c (_bfd_elf_set_section_contents): Use correct type to hold
file position.
and have it loaded by default (as long as the --target option isn't used).
PR binutils/14698
ar.c: Set plugin_target early if plugins are supported.
nm.c: Likewise.
Hi,
On windows host, we see the following ERROR,
(gdb) PASS: gdb.base/setshow.exp: set history filename ~/foobar.baz
ERROR OCCURED: couldn't compile regular expression pattern: invalid escape \ seq
uence
while executing
"expect -nobrace -i exp13 -timeout 10 -re {.*A problem internal to GDB has been
detected} {
fail "$message (GDB internal error)"
gdb_internal..."
invoked from within
"expect {
-i exp13 -timeout 10
-re ".*A problem internal to GDB has been detected" {
fail "$message (GDB internal error)"
gdb_internal_erro..."
("uplevel" body line 1)
invoked from within
"uplevel $body" REGEXP REG_EESCAPE {invalid escape \ sequence} couldn't compile
regular expression pattern: invalid escape \ sequenceERROR: Process no longer ex
ists
which leads to
UNRESOLVED: gdb.base/setshow.exp: show history filename (~/foobar.baz)
and this error is thrown from this test below:
gdb_test "show history filename" \
"The filename in which to record the command history is \"$HOME/foobar.baz\"..*" \
"show history filename (~/foobar.baz)"
HOME is a windows path, like C:\foo\bar. When it is used in gdb_test to match
output, the error is thrown because backslash is a special character in
regular expression. This patch is to escape backslash to fix this
error by using string_to_regexp.
gdb/testsuite:
2014-04-03 Yao Qi <yao@codesourcery.com>
* gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
GCC 4.8 now adds linker plugin options by default, which conflict with the
--incremental tests in the testsuite. This patch checks whether the compiler
supports the -fno-use-linker-plugin option, and adds it to all link
commands.
2014-04-02 Cary Coutant <ccoutant@google.com>
* configure.ac (HAVE_PUBNAMES): Use C instead of C++.
(HAVE_NO_USE_LINKER_PLUGIN): Check for -fno-use-linker-plugin.
* configure: Regenerate.
* testsuite/Makefile.am (OPT_NO_PLUGINS): New macro for
-fno-use-linker-plugin.
(LINK1, CXXLINK1): Add it to the link command.
* testsuite/Makefile.in: Regenerate.
