Rename commands 'maint list symtabs' and 'maint list psymtabs' to
'maint info symtabs' and 'maint info psymtabs'.
* symmisc.c (maintenance_info_symtabs, maintenance_info_psymtabs):
Renamed from maintenance_list_symtabs and maintenance_list_psymtabs.
* symtab.h (maintenance_info_symtabs, maintenance_info_psymtabs):
Declarations updated.
* maint.c (maintenance_list_command): Delete.
(_initialize_maint_cmds): Update calls to add_cmd.
* gdbcmd.h (maintenancelistlist): Delete declaration.
* cli/cli-cmds.c (maintenancelistlist): Delete.
(init_cmd_lists): Don't initialize it.
* cli/cli-cmds.h (maintenancelistlist): Delete declaration.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Update documentation: 'maint list
symtabs' and 'maint list psymtabs' have been renamed 'maint info
symtabs' and 'maint info psymtabs'.
2003-04-10 Jim Blandy <jimb@redhat.com>
* symmisc.c: #include "gdb_regex.h".
(maintenance_list_symtabs, maintenance_list_psymtabs): New
functions.
* maint.c (maintenance_list_command): New function.
(_initialize_maint_cmds): Register the above as commands.
* symtab.h (maintenance_list_symtabs,
maintenance_list_psymtabs): New declarations.
* cli/cli-cmds.c (maintenancelistlist): New variable.
(init_cmd_lists): Initialize it.
* cli/cli-cmds.h (maintenancelistlist): New declaration.
* gdbcmd.h (maintenancelistlist): New declaration.
* Makefile.in (symmisc.o): Update dependencies.
gdb/doc/ChangeLog:
2003-04-09 Jim Blandy <jimb@redhat.com>
* gdb.texinfo (Symbols): Document 'maint list symtabs' and 'maint
list psymtabs'.
Check for monstartup and _mcleanup regardless of --enable-profiling.
* maint.c: Check for monstartup and _mcleanup before using them.
* config.in: Regenerated.
* configure: Regenerated.
Jason Molenda <jmolenda@apple.com>.
* Makefile.in (PROFILE_CFLAGS): Substitute from configure.
(INTERNAL_LDFLAGS): Don't include PROFILE_CFLAGS.
* NEWS: Mention profiling.
* configure.in (--enable-gdbtk): Fix typo.
(--enable-profiling): New. Set PROFILE_CFLAGS.
* maint.c (maintenance_set_profile_cmd): Remove NOTYET.
Fill in function.
(profiling_state): New variable.
(mcleanup_wrapper): New function.
(_initialize_maint): Remove NOTYET, fix call to
add_setshow_boolean_cmd for "maint set profile".
* configure: Regenerated.
* maint.c (match_substring): New function. Tokenizer for
'maintenance info sections' command arguments.
(match_bfd_flag): Use match_substring.
(print_bfd_section_info): Use match_substring.
(print_objfile_section_info): Use match_substring.
(maintenance_info_sections): Use match_substring.
* maint.c (maintenance_info_sections): Accept new argument
'ALLOBJ', iterate over all object files.
(print_section_table): Delete. Replaced by:
(print_section_info): New function.
(print_bfd_section_info): New function.
(print_objfile_section_info): New function.
(_initialize_maint_commands): Add help for new features.
* maint.c (maintenance_info_sections): Pass string argument to
print_section_table, so that it can be used to select sections.
(print_section_table): Change PTR to void *. Look at string arg
to select sections by name and by flag attributes.
(match_bfd_flags): New function.
(print_bfd_flags): New function.
From David Whedon <dwhedon@gordian.com>
* top.c (execute_command): Checks all commands beore executing
to see if the user needs to be warned that the command is
deprecated, warns user if appropriate.
(add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
return values from void to struct cmd_list_element *.
* command.c (lookup_cmd_1): Check aliases before following link
in case user needs to be warned about a deprecated alias.
(deprecate_cmd): new exported function for command deprecation,
sets flags and posibly a replacement string.
(deprecated_cmd_warning): New exported funciton to warn user about
a deprecated command.
(lookup_cmd_composition): New exported function that determines
alias, prefix_command, and cmd based on a string. This is useful
is we want to full name of a command.
* command.h : Added prototypes for deprecate_cmd,
deprecated_warn_user and lookup_cmd_composition, added flags to
the cmd_list_element structure, changed return values for
add_com_* and add_info_* from void to cmd_list_element.
* maint.c : (maintenance_deprecate): New function to deprecate a
command. This exists only so that the testsuite can deprecate
commands at runtime and check the warning behavior.
(maintenance_undeprecate) : New function, drops deprecated flags.
(maintenance_do_deprecate): Actually does the (un)deprecation.
(initialize_maint_cmds): Added the above new deprecate commands.
Except for the two m32r modules, this checkin is for
overlay support.
* blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
find_pc_sect_function(), find_pc_sect_partial_function(): new
functions for debugging overlays; pc without section is ambiguous.
* breakpoint.[ch]: add section pointer to breakpoint struct;
add section argument to check_duplicates(); check section as well
as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
breakpoint_thread_match(), bpstat_stop_status()];
add section argument to describe_other_breakpoints();
use INIT_SAL() macro to zero-out new sal structures;
make resolve_sal_pc() fix up the sal's section as well as its pc;
match on section + pc in clear_command() and delete_breakpoint();
account for overlay sections in insert_breakpoints(),
remove_breakpoint() and breakpoint_re_set_one();
all this to support overlays where a PC is not unique.
* exec.c: change xfer_memory() to handle overlay sections.
* findvar.c: change read_var_value() to handle overlay sections.
* frame.h: declaration for block_for_pc_sect() [blockframe.c].
* infcmd.c: jump_command() warns against jumping into an overlay
that's not in memory. Also use INIT_SAL() to initialize sals.
* infrun.c: wait_for_inferior() sets a flag to invalidate cached
overlay state information; Also use INIT_SAL() to init sals.
* m32r-rom.c: modify load routines to use LMA instead of VMA.
* m32r-stub.c: mask exit value down to 8 bits; screen out any
memory read/writes in the range 600000 to a00000, and ff680000
to ff800000 (hangs because nothing is mapped there); fix strcpy().
* maint.c: maintenance command "translate-address" supports overlays.
* minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
* objfiles.[ch]: add ovly_mapped field to the obj_section struct;
this constitutes gdb's internal overlay mapping table. Add macro
ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
Add function find_pc_sect_section().
* printcmd.c: modify print_address_symbolic() with overlay smarts;
modify address_info() with overlay smarts; add function sym_info()
to support the INFO SYMBOL command (translate address to symbol(s));
modify disassemble_command() to work on unmapped overlays.
* source.c: use INIT_SAL() to initialize sals.
* symfile.[ch]: change generic_load() to use section's LMA address
instead of VMA address, for overlay sections.
Add numerous functions for finding a PC's section / overlay,
translating between VMA and LMA address ranges, determining if an
overlay section is mapped, etc. Add several user commands for
overlay debugging. Add support for a "generic" form of automatically
reading overlay mapping info from the inferior (based on the default
(simple) overlay manager which Cygnus provides as an example).
* symtab.[ch]: add functions find_pc_sect_symtab(),
find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
for lookup; modify lookup_symbol and decode_line_1() to use them;
modify find_function_start_sal() to account for overlay sections;
add macro INIT_SAL() for initializing struct symtab_and_line.
* target.c: fix a comment in the declaration of target_ops.
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
