from the constant pool, but doesn't add in the constant pool's
address to it, then this function probably isn't using r12 as a
GOT pointer, and that load probably wasn't part of the prologue.
* dbxread.c (set_namestring): New function, replacing the
SET_NAMESTRING macro.
(SET_NAMESTRING, CUR_SYMBOL_TYPE, CUR_SYMBOL_VALUE,
CUR_SYMBOL_STRX, DBXREAD_ONLY, START_PSYMTAB, END_PSYMTAB): Delete
definitions.
(read_dbx_symtab): Don't include partial-stab.h any more. Don't
reuse code in partial-stab.h, include the code directly, instead.
* Makefile.in (dbxread.o): Remove dependency on partial-stab.h.
(HFILES_NO_SRCDIR): Remove partial-stab.h.
* arch-utils.h (generic_in_function_epilogue_p): Declare extern.
* breakpoint.c (watchpoint_check): Add test whether the pc is
currently in the epilogue of a function.
* gdbarch.c: Autogenerated from gdbarch.sh.
* gdbarch.h: Ditto.
* gdbarch.sh (function_list): Add `in_function_epilogue_p' definition.
several lines with backslashes; the `sed' command in
configure.in's AC_OUTPUT clause that comments out the NATDEPFILES
assignment doesn't handle lines extended with backslashes.
* symtab.c (operator_chars): Allow '*' and '[' to be quoted in
operator names, to avoid regexp expansion.
(search_symbols): Alloca buffer is too small, may get clobbered.
* i386-linux-tdep.c: Include "inferior.h".
(i386_linux_register_name, i386_linux_register_byte,
i386_linux_register_raw_size): New functions.
(i386_linux_write_pc): New function.
* config/i386/tm-linux.h (I386_LINUX_ORIG_EAX_REGNUM): New define.
(NUM_REGS, MAX_NUM_REGS, REGISTER_BYTES, REGISTER_NAME,
REGISTER_BYTE, REGISTER_RAW_SIZE): Define to deal with additional
register.
(i386_linux_register_name, i386_linux_register_byte,
i386_linux_register_raw_size): New prototypes.
(TARGET_WRITE_PC): New define.
(i386_linux_write_pc): New prototype.
i386_register_byte. Made static.
(i386_register_size): Renamed from i386_register_raw_size. Made
static.
(i386_register_virtual_size): Removed.
(i386_register_byte, i386_register_raw_size,
i386_register_virtual_size): New functions.
(_initialize_i386_tdep): Initialize i386_register_offset instead
of i386_register_byte. Remove code to initialize
i386_register_virtual_size.
* config/i386/tm-i386.h (REGISTER_BYTE): Redefine to use
i386_register_byte function.
(REGISTER_RAW_SIZE): Redefine to use i386_register_raw_size
function.
(REGISTER_VIRTUAL_SIZE): Redefine to use
i386_register_virtual_size function.
(i386_register_byte, i386_register_raw_size,
i386_register_virtual_size): New functions.
(REGISTER_NAME): New define.
(i386_register_name): New prototype.
* i386-tdep.c (i386_register_names): New variable.
(i386_register_name): New function.
* config/i386/tm-i386os9k.h, config/i386/tm-ptx.h,
config/i386/tm-symmetry.h: Undefine REGISTER_NAME instead of
REGISTER_NAMES.
loaded DLL matches the on-disk case since the debugging API does not seem to
ensure this. Calculate max name length here.
(handle_load_dll): Move max name length calculation to register_loaded_dll.
* somsolib.c (som_solib_add): A megabyte is 1024*1024 bytes.
* pa64solib.c (add_to_solist): Ditto.
* win32-nat.c (_initialize_inftarg): Remove unnecessary
initialization of auto_solib_add, it defaults to 1.
Changelog:
2001-10-27 Fred Fish <fnf@redhat.com>
* symfile.c (auto_solib_add): Update comment to note that
this variable is now just used as a boolean to control shlib
autoloading, and clarify when it is used.
* symfile.h (auto_solib_add): Ditto.
* symfile.c (auto_solib_limit): New variable that holds the
autoloading threshold instead of overloading auto_solib_add.
* symfile.h (auto_solib_limit): Ditto.
* irix5-nat.c (_initialize_solib): Change auto-solib-add
variable from var_zinteger to var_boolean and update help.
* osfsolib.c (_initialize_solib): Ditto.
* pa64solib.c (_initialize_pa64_solib): Ditto.
* solib.c (_initialize_solib): Ditto.
* somsolib.c (_initialize_som_solib): Ditto.
* xcoffsolib.c (_initialize_solib): Ditto.
* pa64solib.c (pa64_solib_total_st_size): Update comment to
note that the new auto_solib_limit variable is used instead
of overloading auto_solib_add variable.
(_initialize_pa64_solib): Ditto.
* somsolib.c (som_solib_total_st_size): Ditto.
(_initialize_som_solib): Ditto.
* pa64solib.c (_initialize_pa64_solib): Add new set/show
commands for auto-solib-limit variable.
* somsolib.c (_initialize_som_solib): Ditto
* pa64solib.c (add_to_solist): Check that auto_solib_add is
set and use auto_solib_limit as the threshold size instead
of auto_solib_add.
* somsolib.c (som_solib_add): Ditto, and also change warning
text about size threshold exceeded.
doc/ChangeLog:
2001-10-28 Fred Fish <fnf@redhat.com>
* gdb.texinfo (auto-solib-add): Change docs to match
implementation change.
(auto-solib-limit): Add docs for new variable.
(EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, FRAME_CHAIN,
FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, FRAME_NUM_ARGS):
Remove macros. The versions from "tm-i386.h" should work fine
(and in most cases even better).
convert_typed_floating to extract floating-point value from
register buffer.
(i386_store_return_value): Use convert_typed_floating to store
floating-point return balue in register buffer
(i386_register_virtual_type): Change type of floating-point
registers to builtin_type_i387_ext.
(i386_register_convert_to_virtual): Use convert_typed_floating to
do the conversion.
(i386_register_convert_to_raw): Likewise.
(floatformat_from_length): New function.
(NAN): Define to 0.0 if not already defined.
(extract_floating): Rewrite to use floatformat_from_length. Warn
instead of error if LEN doesn't match a known floating-point type,
and return NaN (or 0.0 if NaN isn't available) in that case.
(store_floating): Likewise, but zero out the target byte-stream if
LEN doesn't match a known floating-point type.
(extract_typed_floating): Reformat a bit.
(store_typed_floating): Reformat a bit. Add comment about zeroing
out padding in the target buffer.
* doublest.h (extract_floating, store_floating): Fix comment about
deprecation of these functions. Add parameter names to prototypes.
* cris-tdep.c (constraint): Loop through the whole cris_spec_regs
struct, not just the NUM_SPECREGS first entries.
(bdap_prefix): Read PC before autoincrement.
pointer to Windows' DebugSetProcessKillOnExit() function.
(DebugActiveProcessStop): Ditto for DebugActiveProcessStop().
(has_detach_ability): New function.
(child_attach): If system has detach ability, enable it.
(child_detach): If system has detach ability, actually
detach from process.
Change tty output to Linux format.
of `struct partial_symtab' to only a few locations. This change
is not supposed to affect the way the values are computed, only
where they live.
* dbxread.c (struct symloc): Add `textlow' and `texthigh' fields
to the reader-specific structure.
* mdebugread.c (struct symloc): Same.
* dbxread.c (TEXTLOW, TEXTHIGH): New accessor macros.
* mdebugread.c (TEXTLOW, TEXTHIGH): Same.
* dbxread.c (dbx_symfile_read): After we've built all our partial
symbol tables, set each partial symtab's `textlow' and `texthigh'
fields from our reader-specific structure.
* mdebugread.c (mdebug_build_psymtabs): Same.
* dbxread.c (start_psymtab): Initialize the reader-specific
structure's `textlow' and `texthigh' from the new psymtab's.
* mdebugread.c (parse_partial_symbols, new_psymtab): Same.
* dbxread.c (read_dbx_symtab, end_psymtab, read_ofile_symtab): Use
the reader-specific `textlow' and `texthigh', not the generic
psymtab fields.
* mdebugread.c (parse_lines, parse_partial_symbols,
psymtab_to_symtab_1): Same.
* partial-stab.h: Same.
already loaded DLL.
(register_loaded_dll): Convert loaded DLL name to "posix" format or it will
confuse subsequent opening of the filename due to dos paths.
(dll_symbol_command): Pass from_tty parameter to safe_symbol_file_add.
* lin-lwp.c (struct lwp_info): Add new member `cloned'.
(is_cloned) Removed.
(lin_lwp_attach_lwp): Don't call stop_wait_callback. Instead call
waitpid explicitly. Mark the LWP as cloned if waitpid fails and
retry with __WCLONE flag.
(lin_lwp_attach): Likewise. Warn if attaching to a cloned process.
(detach_callback): Replace use of is_cloned with explicit check on
LWP id and process id.
(stop_wait_callback): Replace use of is_cloned with check if LWP
is marked as cloned.
[CHILD_WAIT] (child_wait): New function.
(lin_lwp_wait): Replace use of is_cloned with check if LWP is
marked as cloned. Mark newly detected LWPs as cloned if detected
by waitpid with __WCLONE flag.
(kill_wait_callback): Replace use of is_cloned with check if LWP
is marked as cloned.
* config/i386/nm-linux.h (struct target_waitstatus): Add forward
declaration.
(child_wait): Add prototype.
(CHILD_WAIT): Define.
errors in "long long" handling for 'finish' and 'return' commands.
* win32-nat.c (safe_symbol_file_add_stub): Avoid adding a shared library if it
has already been loaded.
(safe_symbol_file_add_cleanup): Don't mess with stderr or we won't see any
error messages.
(safe_symbol_file_add): Ditto.
(solib_symbols_add): Make static. Accept 'from_tty' parameter. Pass it to
safe_symbol_file_add.
(core_dll_symbols_add): Accomodate extra solib_symbols_add parameter.
(child_solib_add): Ditto.
* win32-nat.c (handle_exception): Don't print "first chance" exceptions.
(get_child_debug_event): Continue from exceptions if !handle_exception.
