Calling bfd_copy_private_bfd_data is necessary to copy ELF file header
info.
binutils/
* objcopy.c (copy_object): Don't omit bfd_copy_private_bfd_data
call when extract_symbol.
bfd/
* elf32-v850.c (v850_elf_copy_private_bfd_data): Remove assertion
that input and output .note.renesas sections are same size.
Instead, only copy input to output if they are.
This commit fixes a few issues in the mechanism for passing information
about ".org" and ".align" directives from the assembler to the linker,
used by the avr target.
In the original commit fdd410ac7a, there
were some mistakes when writing out information about ".align"
directives:
- An align with fill does not write out its information correctly, the
fill data overwrites the alignment data.
- Each alignment directive is recorded at the location where the
previous alignment directive should be recorded, the first alignment
directive is discarded.
In commit 137c83d69f, the data produced by
objdump is not correct:
- It's miss-aligned due to a missing whitespace.
- The fill data for align with fill records is not displayed
correctly.
All of the above issues are addressed in this commit, and the test is
improved to cover these cases.
binutils/ChangeLog:
* od-elf32_avr.c (elf32_avr_dump_avr_prop): Fix printing of align
specific data, fix formatting for align and org data.
gas/ChangeLog:
* config/tc-avr.c (avr_output_property_record): Fix overwrite bug
for align and fill records.
(avr_handle_align): Record fill information for align frags.
(create_record_for_frag): Add next frag assertion, use correct
address for align records.
gas/testsuite/ChangeLog:
* gas/avr/avr-prop-1.s: Use fill in some cases.
* gas/avr/avr-prop-1.d: Update expected results.
We can't use the output section size to copy input section since
--interleave will shrink the output section. Instead, we change
bfd_convert_section_contents to return the updated input section
size. When we do that, we don't need to adjust the output section
size to skip gap fills.
bfd/
PR binutils/19020
* bfd.c (bfd_convert_section_contents): Add ptr_size parameter.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/19020
* objcopy.c (copy_object): Don't adjust the output section size
when copying from input sections.
(copy_section): Use input section size for the copy. Get the
updated section size from bfd_convert_section_contents.
binutils/testsuite/
PR binutils/19020
* binutils-all/objcopy.exp: Run pr19020a and pr19020b.
* lib/utils-lib.exp (run_dump_test): Support binary input.
* binutils-all/pr19020.in: New file.
* binutils-all/pr19020a.d: Likewise.
* binutils-all/pr19020b.d: Likewise.
In objcopy, copy_object calls copy_section to copy contents of input
section to output section. When --gap-fill= is used, objcopy extends
the size of output sectios to fill gaps between output sections with
gap fills. In this case, we adjust the output section size to skip
gap files to avoid reading beypond the input section buffer before
calling copy_section and restore the output section size after input
sections have been copied.
binutils/
PR binutils/19005
* objcopy.c (copy_object): Adjust the output section size to
skip gap fills between sections when copying from input sections
to output sections.
ld/testsuite/
PR binutils/19005
* ld-elf/pr19005.d: New file.
* ld-elf/pr19005.s: Likewise.
* ld-elf/pr19005.t: Likewise.
binutils PR binutils/15835
* readelf.c (struct elf_section_list): New structure.
(symtab_shndx_hdr): Replace with symtab_shndx_list.
(get_32bit_elf_symbols): Scan for a symbol index table matching
the symbol table in use.
(get_64bit_elf_symbols): Likewise.
(process_section_headers): Handle multiple symbol index sections.
bfd * elf-bfd.h (struct elf_section_list): New structure.
(struct elf_obj_tdata): Replace symtab_shndx_hdr with
symtab_shndx_list. Delete symtab_shndx_section.
(elf_symtab_shndx): Replace macro with elf_symtab_shndx_list.
* elf.c (bfd_elf_get_syms): If symtab index sections are present,
scan them for the section that matches the provided symbol table.
(bfd_section_from_shdr): Record all SHT_SYMTAB_SHNDX sections.
(assign_section_numbers): Use the first symtab index table in the
list.
(_bfd_elf_compute_section_file_positions): Replace use of
symtab_shndx_hdr with use of symtab_shndx_list.
(find_section_in_list): New function.
(assign_file_postions_except_relocs): Use new function.
(_bfd_elf_copy_private_symbol_data): Likewise.
(swap_out_syms): Handle multiple symbol table index sections.
* elf32-m32c.c (m32c_elf_relax_section): Replace use of
symtab_shndx_hdr with use of symtab_shndx_list.
* elf32-rl78.c (rl78_elf_relax_section): Likewise.
* elf32-rx.c (rx_relax_section): Likewise.
* elf32-v850.c (v850_elf_relax_delete_bytes): Likewise.
* elflink.c (bfd_elf_final_link): Likewise.
* strings.c: Add -s/--output-separator option to specify custom
separator string.
* NEWS: Mention the new feature.
* doc/binutils.text (strings): Document the new command line
option.
PR binutils/18879
* readelf.c (get_unwind_section_word): Check for negative offsets
and very small sections.
(dump_arm_unwind): Warn if the table offset is too large.
(Commit d23d1dff missed pushing the config/iconv.m4 change, and to
regenerate binutils' configure.)
Original description:
This is the second in a series of patches to make a build with an
in-tree GNU libiconv work as designed.
Currently GDB is the only toolchain component which actually uses an
in-tree libiconv. This patch modifies the common AM_ICONV to use an
in-tree libiconv when present and not already provided by libc.
(GDB's workaround uses an in-tree libiconv even when libc provides
iconv(3); I'm not sure when or why that would be desirable.)
config/ChangeLog:
2015-08-24 Yaakov Selkowitz <yselkowi@redhat.com>
* iconv.m4 (AM_ICONV_LINK): Use in-tree libiconv when present.
binutils/ChangeLog:
2015-08-24 Yaakov Selkowitz <yselkowi@redhat.com>
* configure: Regenerate.
Some targets provide aligned .bss sections, so explicitly align.
msp430 and rl78 emit "magic" symbols when assembling symbol.s, and
mips targets emit STT_OBJECT rather than STT_NOTYPE syms.
* binutils-all/strip-12.s: Align .bss section.
* binutils-all/strip-12.d: Adjust.
* binutils-all/symbols-1.d: Allow extraneous symbols.
* binutils-all/symbols-2.d: Likewise, and V for weakened syms.
* binutils-all/symbols-3.d: Likewise.
* binutils-all/symbols-4.d: Likewise.
When copying the sh_link and sh_info fields in stripped section headers,
we also check if the sh_type, sh_flags, /sh_addralign and sh_entsize
fields of the output section match the output. Since --only-keep-debug
turns all non-debug sections into SHT_NOBITS sections, the output
SHT_NOBITS type matches any input type.
bfd/
PR binutils/18785
* elf.c (_bfd_elf_copy_private_bfd_data): When copying the
sh_link and sh_info fields in stripped section headers, we also
check if the sh_type, sh_flags, /sh_addralign and sh_entsize
fields of the output section match the output. Since
--only-keep-debug turns all non-debug sections into SHT_NOBITS
sections, the output SHT_NOBITS type matches any input type.
binutils/testsuite/
PR binutils/18785
* binutils-all/objcopy.exp: Run strip-12.
* binutils-all/strip-12.d: New file.
* binutils-all/strip-12.s: Likewise.
When using options such as --localize-symbol, --globalize-symbol, etc,
along with the --wildcard option, prefixing a symbol name with '!'
should provide non-matching behaviour, as example the following example
is given in the manual:
--wildcard --weaken-symbol !foo --weaken-symbol fo*
which should weaken all symbols matching the pattern 'fo*', but not the
symbol 'foo'.
However, this currently does not work, the current logic will waken all
symbols matching the pattern 'fo*' AND all symbols that are not 'foo'.
The symbol 'foo' is covered by the first condition, and so is weakened,
while, other symbols, for example 'bar' will match the second condition,
and so be weakened.
This patch adjusts the logic so that a pattern prefixed with '!'
specifically DOES NOT apply the relevant change to any matching symbols,
instead of applying the change to all non-matching symbols. So this:
--weaken-symbol !foo
will ensure that the symbol 'foo' is not weakened, but says nothing
about symbols that are not 'foo'. As a result, a pattern prefixed with
'!' now only makes sense when used alongside a more wide ranging
wildcard pattern.
This change should make the wildcard matching feature more useful, with
no overall loss of functionality. The example given in the manual,
weaken all symbols matching 'fo*' except 'foo' can now be achieved, but
so too can more complex examples, such as weaken all symbols matching
'fo*' except 'foo', 'foa', and 'fob', like this:
--wildcard --weaken-symbol !foo \
--weaken-symbol !foa \
--weaken-symbol !fob \
--weaken-symbol fo*
Under the previous scheme, something as symbols as, weaken all symbols
except 'foo' could have been achieved with this:
--weaken-symbol !foo
however, this will no longer work. To achieve the same result under the
new scheme this is now required:
--weaken-symbol !foo --weaken-symbol *
binutils/ChangeLog:
* objcopy.c (is_specified_symbol_predicate): Don't stop at first
match. Non-match rules set found to FALSE.
binutils/testsuite/ChangeLog:
* binutils-all/objcopy.exp: Run new symbol tests.
(objcopy_test_symbol_manipulation): New function.
* binutils-all/symbols-1.d: New file.
* binutils-all/symbols-2.d: New file.
* binutils-all/symbols-3.d: New file.
* binutils-all/symbols-4.d: New file.
* binutils-all/symbols.s: New file.
bfd * elf.c (_bfd_elf_copy_private_bfd_data): Copy the sh_link and
sh_info fields of sections whose type has been changed to
SHT_NOBITS.
bin * doc/binutils.texi: Document that the --only-keep-debug option
to strip and objcopy preserves the section headers of stripped
sections.
tests * binutils-all/objcopy.exp (keep_debug_symbols_and_check_links):
New proc. Checks that debug-info-only binaries retain the
sh_link field in stripped sections.
PR binutils/18750
* ihex.c (ihex_scan): Fixes incorrect escape sequence in error message
and stack overflow when char is signed and \200-\376 was in place of hex
digit; also fixes \377 was handled as EOF instead of "incorrect character".
(ihex_read_section): Changed for consistency.
(ihex_bad_byte): Prevent (now impossible to trigger) stack
overflow and incorrect escape sequence handling.
* srec.c (srec_bad_byte): Likewise.
* readelf.c (process_mips_specific): Fix incorrect escape
sequence handling.
* lib/utils-lib.exp (run_dump_test): Document DUMPPROG, readelf
and size parameters. Alpha-sort switch tables. Include
addr2line, and size in list of possible auto-detected dump
programs.
GCC 6 warns:
error: result of ‘4294967295ll << 32’ requires 65 bits to represent, but ‘long long int’ only has 64 bits [-Werror=shift-overflow=]
on ((((bfd_signed_vma) 0xffffffff) << 32) | 0xffffffff). This patch
replaces it with bfd_signed_vma) 0xffffffffffffffffLL.
* stabs.c (parse_stab_range_type): Use 0xffffffffffffffffLL.
gas * config/tc-rl78.c (rl78_abs_sym): New local variable.
(md_begin): Initialise the new symbol.
(OPIMM): Define the value to be relative to the new symbol and not
the absolute section symbol.
ld * emulparams/elf32rl78.sh (OTHER_SECTIONS): Provide a value for
the _-rl78_abs__ symbol.
tests * gas/all/struct.d: Allow for extra symbols in the output.
* gas/macros/test1.d: Likewise.
* gas/elf/elf.exp: Add an rl78 machine.
* gas/elf/sections2e-rl78: New file.
tests * binutils-all/localize-hidden-1.d: Allow for extra symbols in the
output.
* binutils-all/strip-11.d: Skip for the RL78.
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.
binutils/
* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
zlib-gnu.
* doc/binutils.texi: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
binutils/testsuite/
* binutils-all/compress.exp: Update.
gas/
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
gold/
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Make --compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
".zdebug_".
* testsuite/Makefile.in: Regenerated.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.
ld/testsuite/
* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
SHF_COMPRESSED bit.
* ld-elf/zlibnormal.rS: Likewise.
The output SHF_COMPRESSED section size is different from input if
ELF classes of input and output aren't the same. We must adjust
the section sizes as well as the compression headers in
SHF_COMPRESSED sections when converting objects between different
ELF classes.
bfd/
PR binutils/18656
* bfd.c (bfd_convert_section_size): New function.
(bfd_convert_section_contents): Likewise.
* bfd-in2.h: Regenerated.
binutils/
2015-07-10 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/18656
* objcopy.c (setup_section): Call bfd_convert_section_size
to get the output section size.
(copy_section): Get the section size from the output section
and call bfd_get_full_section_contents to convert section
contents for output.
binutils/testsuite/
PR binutils/18656
* binutils-all/compress.exp (convert_test): New proc.
Run conversion tests between x86-64 and x32.
include * dis-asm.h (struct disassemble_info): Add stop_vma field.
binuti * objdump.c (disassemble_bytes): Set the stop_vma field in the
disassemble_info structure when disassembling code sections with
-d.
* doc/binutils.texi (objdump): Document the discrepancy between -d
and -D.
opcodes * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
requested region lies beyond it.
* bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
looking for 32-bit insns.
* mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
data.
* sh-dis.c (print_insn_sh): Likewise.
* tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
blocks of instructions.
* vax-dis.c (print_insn_vax): Check that the requested address
does not clash with the stop_vma.
tests * gas/arm/backslash-at.s: Add extra .byte directives so that the
foo symbol does not appear to point half way through an
instruction.
* gas/arm/backslash-at.d: Update expected disassembly.
* gas/i386/ilp32/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/ilp32/x86-64-opcode-inval.d: Likewise.
* gas/i386/x86-64-opcode-inval-intel.d: Likewise.
* gas/i386/x86-64-opcode-inval.d: Likewise.
FreeBSD has used ELF for all targets for more than 15 years. Add
*-*-freebsd* except i?86-*-freebsd\[12\].* to is_elf_format. Update
is_aout_format to include a trailing dot, so that it does not match
freebsd-10.0 and later.
PR binutils/18420
* ia64-unwind.c (unw_decode): Add end parameter. Pass parameter
on to decode functions.
(unw_devode_p2_p5): Pass end paraemter to UNW_DEC_SPILL_MASK.
(UNW_DEC_SPILL_MASK): Add end parameter. Check that unw_rlen does
not take us beyond the end of the buffer.
* ia64-unwind.h (unw_decode): Update prototype.
* readelf.c (dump_ia64_unwind): Pass end pointer to unw_decode.
AMD64 spec and Intel64 spec differ in direct unconditional branches in
64-bit mode. AMD64 supports direct unconditional branches with 16-bit
offset via the data size prefix, which truncates RIP to 16 bits, while
the data size prefix is ignored by Intel64.
This patch adds -mamd64/-mintel64 option to x86-64 assembler and
-Mamd64/-Mintel64 option to x86-64 disassembler. The most permissive
ISA, which is AMD64, is the default.
GDB can add an option, similar to
(gdb) help set disassembly-flavor
Set the disassembly flavor.
The valid values are "att" and "intel", and the default value is "att".
to select which ISA to disassemble.
binutils/
PR binutis/18386
* doc/binutils.texi: Document -Mamd64 and -Mintel64.
gas/
PR binutis/18386
* config/tc-i386.c (OPTION_MAMD64): New.
(OPTION_MINTEL64): Likewise.
(md_longopts): Add -mamd64 and -mintel64.
(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
(md_show_usage): Add -mamd64 and -mintel64.
* doc/c-i386.texi: Document -mamd64 and -mintel64.
gas/testsuite/
PR binutis/18386
* gas/i386/i386.exp: Run x86-64-branch-2 and x86-64-branch-3.
* gas/i386/x86-64-branch.d: Also pass -Mintel64 to objdump.
* gas/i386/ilp32/x86-64-branch.d: Likewise.
* gas/i386/x86-64-branch-2.d: New file.
* gas/i386/x86-64-branch-2.s: Likewise.
* gas/i386/x86-64-branch-3.l: Likewise.
* gas/i386/x86-64-branch-3.s: Likewise.
ld/testsuite/
PR binutis/18386
* ld-x86-64/tlsgdesc.dd: Also pass -Mintel64 to objdump.
* ld-x86-64/tlspic.dd: Likewise.
* ld-x86-64/x86-64.exp (x86_64tests): Also pass -Mintel64 to
objdump for tlspic.dd and tlsgdesc.dd.
opcodes/
PR binutis/18386
* i386-dis.c: Add comments for '@'.
(x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
(enum x86_64_isa): New.
(isa64): Likewise.
(print_i386_disassembler_options): Add amd64 and intel64.
(print_insn): Handle amd64 and intel64.
(putop): Handle '@'.
(OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
* i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
* i386-opc.h (AMD64): New.
(CpuIntel64): Likewise.
(i386_cpu_flags): Add cpuamd64 and cpuintel64.
* i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
Mark direct call/jmp without Disp16|Disp32 as Intel64.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
bin * readelf.c (options): Add "decompress".
(usage): Mention -z/--decompress.
(parse_args): Handle -z.
(uncompress_section_contents): Move to earlier in the file.
(dump_section_as_strings): If requested, decompress the section
before dumping.
(dump_section_as_bytes): Likewise.
* doc/binutils.texi: Document the new option.
tests * binutils-all/z.s: New test. Checks the --decompress option to
readelf.
* binutils-all/readelf.exp: Run the test.
* binutils-all/readelf.z: Expected output from readelf.
PR binutils/18374
bin * dwarf.h (struct dwarf_section): Add reloc_info and num_relocs
fields.
(struct dwarf_section_display): Change bitfield to boolean.
(reloc_at): Add prototype.
* dwarf.c (display_loc_list): Ignore list terminators if there are
relocs against them.
(display_debug_loc): Issue a warning if there are relocs against
the .debug_loc section.
(display_displays): Initialise reloc_info and num_relocs fields.
* objdump.c (load_specific_debug_section): Initialise reloc_info
and num_relocs fields.
(reloc_at): New function.
* readelf.c (is_32bit_abs_reloc): Add IA64's R_IA64_DIS32LSB
reloc.
(reloc_at): New function.
(apply_relocations): Add relocs_return and num_relocs_return
parameters. Fill them in with the loaded relocs if non-NULL.
(dump_section_as_bytes): Update call to apply_relocations.
(load_specific_debug_section): Initialise reloc_info and
num_relocs fields.
tests * binutils-all/pr18374.s: New test file.
* binutils-all/readelf.exp: Assemble and run the new test.
* binutils-all/readelf.pr18374: Expected output from readelf.
Remove the wait instructions for server processors, since they were never
implemented. Also add the extra operands added to the tlbie and slbia
instructions with ISA 2.06 and ISA 2.05 respectively.
binutils/
* MAINTAINERS: Add myself as PPC maintainer.
opcodes/
* ppc-opc.c (IH) New define.
(powerpc_opcodes) <wait>: Do not enable for POWER7.
<tlbie>: Add RS operand for POWER7.
<slbia>: Add IH operand for POWER6.
gas/testsuite/
* gas/ppc/power4.d: Add a slbia test.
* gas/ppc/power4.s: Likewise.
* gas/ppc/power6.d: Add slbia and tlbie tests.
* gas/ppc/power6.s: Likewise.
* gas/ppc/power7.d: Remove wait tests. Add a tlbie test.
* gas/ppc/power7.s: Likewise.
In a SHF_COMPRESSED compressed section, the raw compressed data should
begin immediately after the compression header. This patch removes the
extra zlib header from the SHF_COMPRESSED section.
bfd/
* bfd.c (bfd_update_compression_header): Also write the zlib
header if the SHF_COMPRESSED bit cleared..
(bfd_check_compression_header): Return the uncompressed size.
* compress.c (decompress_contents): Don't skip the zlib header.
(bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB,
which doesn't have the zlib header.
(bfd_init_section_decompress_status): Likewise.
(bfd_get_full_section_contents): Updated.
(bfd_is_section_compressed): Likewise.
(bfd_is_section_compressed_with_header): Return the uncompressed
size.
* elf.c (_bfd_elf_make_section_from_shdr): Updated.
* bfd-in2.h: Regenerated.
binutils/
* readelf.c (uncompress_section_contents): Add a parameter for
uncompressed size. Don't check the zlib header.
(load_specific_debug_section): Updated.
binutils/testsuite/
* binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info"
with "$OBJDUMP -W".
* binutils-all/libdw2-compressedgabi.out: Updated.
gas/
2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header, which
is handled by bfd_update_compression_header.
Mixing target and not-target directives can be used to run for x86_64-*-*
target while skipping x86_64-*-gnux32 target. This patch allows mixing
target and not-target directives. It is used to skip elfedit-1 for
x86_64-*-gnux32.
* binutils-all/elfedit-1.d: Skip x86_64-*-gnux32.
* lib/utils-lib.exp (run_dump_test): Allow mixing target and
not-target directives.
binutils/
* elfedit.c (enum elfclass): New.
(input_elf_class): Change type to enum elfclass.
(output_elf_class): New.
(elf_class): Change return type to enum elfclass. Support EM_386
and EM_IAMCU.
(update_elf_header): Check if input and output ELF classes match.
(elf_machine): Support EM_386 and EM_IAMCU.
(main): Update input_elf_class. Set output_elf_class.
* doc/binutils.texi: Update elfedit.
binutils/testsuite/
* binutils-all/elfedit-5.d: New file.
* binutils-all/elfedit.exp: Run elfedit-5.
PR 18313
bin * ieee.c (ieee_read_cxx_class): Initialise the varargs variable.
* readelf.c (uncompress_section_contents): Zero initialise the
zstream structure.
bfd * compress.c (decompress_contents): Zero initialse the z_stream
structure.
Change compressed input debug section name for objdump is very confusing.
But we need to change it for linker so that linker will consider the
input section as a debug section. This patch delays section rename to
elf_fake_sections for objcopy and avoids it for objdump.
bfd/
PR binutils/18209
* bfd.c (bfd): Add is_linker_input.
* elf.c (convert_debug_to_zdebug): New.
(convert_zdebug_to_debug): Likewise.
(_bfd_elf_make_section_from_shdr): Don't convert .debug_* to
.zdebug_* here. Use convert_zdebug_to_debug. Set SEC_ELF_RENAME.
(_bfd_elf_init_reloc_shdr): Pass a pointer to section name
instead of a pointer to section.
(elf_fake_sections): Rename the section name if SEC_ELF_RENAME
is set.
* section.c (SEC_ELF_RENAME): New.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/18209
* objcopy.c (setup_section): Copy compress status.
binutils/testsuite/
PR binutils/18209
* binutils-all/compress.exp: Replace dw2-3.W with dw2-3gabi.W
on zlib-gabi output.
* binutils-all/dw2-1.W: Convert section names to .zdebug_*.
* binutils-all/dw2-3.W: Likewise.
* binutils-all/objdump.W: Likewise.
* binutils-all/dw2-3gabi.W: New file.
ld/
PR binutils/18209
* ldfile.c (ldfile_try_open_bfd): Set is_linker_input to 1.
gas * config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
(TC_FORCE_RELOCATION_SUB_SAME): Define.
(DWARF2_USE_FIXED_ADVANCE_PC): Define.
* gas/lns/lns.exp: Add RL78 to list of targets using
DW_LNS_fixed_advance_pc.
bfd * elf32-rl78.c (RL78_OP_REL): New macro.
(rl78_elf_howto_table): Use it for complex relocs.
(get_symbol_value): Handle the cases when the info or status
arguments are NULL.
(get_romstart): Cache the status returned by get_symbol_value.
(get_ramstart): Likewise.
(RL78_STACK_PUSH): Generate an error message if the stack
overflows.
(RL78_STACK_POP): Likewise for underflows.
(rl78_compute_complex_reloc): New function. Contains the basic
processing code for all RL78 complex relocs.
(rl78_special_reloc): New function. Provides special reloc
handling for complex relocs.
(rl78_elf_relocate_section): Use rl78_compute_complex_reloc.
(rl78_offset_for_reloc): Likewise.
binutils* readelf.c (target_specific_reloc_handling): Add code to handle
RL78 complex relocs.
We can't check if input is ELF in copy_file since some targets may only
set xvec after bfd_check_format_matches is called. This patch moves
this check to copy_object.
bfd/
* elfxx-target.h (TARGET_BIG_SYM): Add BFD_COMPRESS_GABI to
object_flags.
(TARGET_LITTLE_SYM): Likewise.
binutils/
* objcopy.c (do_debug_sections): Use bit patterns.
(copy_object): Return FALSE for compress_zlib, compress_gnu_zlib
and compress_gabi_zlib on non-ELF input.
(copy_file): Don't check non-ELF input here.
bfd * elf32-rx.c (describe_flags): Report the settings of the string
insn using bits.
(rx_elf_merge_private_bfd_data): Handle merging of the string insn
using bits.
bin * readelf.c (get_machine_flags): Report the setting of the string
insn using bits.
gas * config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
(md_longopts): Add -mno-allow-string-insns.
(md_parse_option): Handle -mno-allow-string-insns.
(md_show_usage): Mention -mno-allow-string-insns.
(rx_note_string_insn_use): New function. Produces an error
message if a string insn is used when it is not allowed.
* config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
(SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
* config/rx-defs.h (rx_note_string_insn_use): Prototype.
* doc/c-rx.texi: Document -mno-allow-string-insns.
elf * rx.h (E_FLAG_RX_SINSNS_SET): New bit in e_flags field.
(E_FLAG_RX_SINSNS_YES): Likewise.
(E_FLAG_RX_SINSNS_MASK): New define.
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}
options to gas and objcopy for ELF files. They control how DWARF debug
sections are compressed. --compress-debug-sections=none is equivalent to
--nocompress-debug-sections. --compress-debug-sections=zlib and
--compress-debug-sections=zlib-gnu are equivalent to
--compress-debug-sections. --compress-debug-sections=zlib-gabi compresses
DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker
changes are required to support SHF_COMPRESSED.
bfd/
* archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI
bit.
* bfd.c (bfd::flags): Increase size to 18 bits.
(BFD_COMPRESS_GABI): New.
(BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
(bfd_update_compression_header): New fuction.
(bfd_check_compression_header): Likewise.
(bfd_get_compression_header_size): Likewise.
(bfd_is_section_compressed_with_header): Likewise.
* compress.c (MAX_COMPRESSION_HEADER_SIZE): New.
(bfd_compress_section_contents): Return the uncompressed size if
the full section contents is compressed successfully. Support
converting from/to .zdebug* sections.
(bfd_get_full_section_contents): Call
bfd_get_compression_header_size to get compression header size.
(bfd_is_section_compressed): Renamed to ...
(bfd_is_section_compressed_with_header): This. Add a pointer
argument to return compression header size.
(bfd_is_section_compressed): Use it.
(bfd_init_section_decompress_status): Call
bfd_get_compression_header_size to get compression header size.
Return FALSE if uncompressed section size is 0.
* elf.c (_bfd_elf_make_section_from_shdr): Support converting
from/to .zdebug* sections.
* bfd-in2.h: Regenerated.
binutils/
* objcopy.c (do_debug_sections): Add compress_zlib,
compress_gnu_zlib and compress_gabi_zlib.
(copy_options): Use optional_argument on compress-debug-sections.
(copy_usage): Update --compress-debug-sections.
(copy_file): Handle compress_zlib, compress_gnu_zlib and
compress_gabi_zlib.
(copy_main): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* doc/binutils.texi: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
binutils/testsuite/
* compress.exp: Add tests for
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* binutils-all/dw2-3.rS: New file.
* binutils-all/dw2-3.rt: Likewise.
* binutils-all/libdw2-compressedgabi.out: Likewise.
gas/
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
gas/testsuite/
* gas/i386/dw2-compressed-1.d: New file.
* gas/i386/dw2-compressed-2.d: Likewise.
* gas/i386/dw2-compressed-3.d: Likewise.
* gas/i386/x86-64-dw2-compressed-2.d: Likewise.
* gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1,
dw2-compressed-3 and x86-64-dw2-compressed-2.
ld/testsuite/
* ld-elf/compress.exp: Add a test for
--compress-debug-sections=zlib-gabi.
(build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi.
(run_tests): Likewise.
Verify linker output with zlib-gabi compressed debug input.
* ld-elf/compressed1a.d: New file.
* ld-elf/compressed1b.d: Likewise.
* ld-elf/compressed1c.d: Likewise.
Optional argument of a command line option must start with "=".
* objcopy.c (copy_usage): Replace "--interleave [<number>]" with
--interleave[=<number>].
There is no need to generate compressed debug section if compressed
section size is the same as before compression. We should xfail the
compressed debug section test if there are no compressed sections
binutils/testsuite/
* binutils-all/compress.exp (compression_used): New.
Xfail test if compression didn't make the section smaller.
gas/
2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header if
compressed section size is the same as before compression.
inc * rl78.h (E_FLAG_RL78_G10): Redefine.
(E_FLAG_RL78_CPU_MASK, E_FLAG_RL78_ANY_CPU, E_FLAG_RL78_G13
E_FLAG_RL78_G14): New flags.
bin * readelf.c (get_machine_flags): Decode RL78's G13 and G14 flags.
gas * config/tc-rl78.c (enum options): Add G13 and G14.
(md_longopts): Add -mg13 and -mg14.
(md_parse_option): Handle -mg13 and -mg14.
(md_show_usage): List -mg13 and -mg14.
* doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
bfd * elf32-rl78.c (rl78_cpu_name): New function. Prints the name of
the RL78 core based upon the flags.
(rl78_elf_merge_private_bfd_data): Handle merging of G13 and G14
flags.
(rl78_elf_print_private_bfd_data): Use rl78_cpu_name.
(elf32_rl78_machine): Always return bfd_mach_rl78.
PR binutils/18087
gas * doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
tests * gas/i386/dw2-compress-1.d: Do not expect the .debug_abbrev or
.debug_info sections to be compressed.
binu * doc/binutils.texi: Note that when objcopy compresses debug
sections the compression is only performed if it makes the section
smaller.
bfd * coffgen.c (make_a_section_from_file): Only prepend a z to a
debug section's name if the section was actually compressed.
* elf.c (_bfd_elf_make_section_from_shdr): Likewise.
* compress.c (bfd_init_section_compress_status): Do not compress
the section if doing so would make it bigger. In such cases leave
the section alone and return COMPRESS_SECTION_NONE.
PR binutils/18064
* doc/binutils.texi (objcopy): Extend description of
--add-gnu-debuglink option to explain that the separate debug info
file must exist. Add a description of what to do if the debug
info file is built in one place but then installed into a separate
location.
PR binutils/17994
* dlltool.c (temp_file_to_remove): New local array.
(unlink_temp_files): New functions - unlinks any file in the
temp_file_to_remove array, unless dotdeltemps is set.
(gen_exp_file): Add temp files to array.
(make_head): Likewise.
(make_delay_head): Likewise.
(make_tail): Likewise.
(gen_lib_file): Call unlink_temp_files.
2015-03-03 Jiong Wang <jiong.wang@arm.com>
opcode/
* arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
binutils/testsuite/
* binutils-all/arm/rvct_symbol.s: New testcase.
* binutils-all/arm/objdump.exp: Run it.
New option for objcopy --update-section allows the contents of a section
to be updated while maintaining the section flags, and, for ELF files,
the section to segment mapping.
New test uses --dump-section and --update-section to check that a
section can be made larger and smaller with an update.
binutils/ChangeLog:
* objcopy.c (update_sections): New list.
(command_line_switch): Add OPTION_UPDATE_SECTION.
(copy_options): Add update-section.
(copy_usage): Document new option.
(is_update_section): New function.
(is_strip_section_1): Add check for attempt to update and remove
the same section.
(copy_object): Update size and content of requested sections.
(skip_section): Don't copy for updated sections.
(copy_main): Handle --update-section.
* doc/binutils.texi (objcopy): Add description of --update-section
option.
* NEWS: Mention --update-section option.
binutils/testsuite/ChangeLog:
* binutils-all/update-1.s: New file.
* binutils-all/update-2.s: New file.
* binutils-all/update-3.s: New file.
* binutils-all/update-4.s: New file.
* binutils-all/update-section.exp: New file.
PR binutils/17512
* coffgrok.c (do_type): Check for an out of range tag index.
Check for integer overflow computing array dimension.
(do_define): Likewise.
In commit 7173b38a44 I used optarg as the
name for a function parameter, shadowing the global of that name. This
commit changes the function parameter to be called arg.
binutils/ChangeLog:
* objcopy.c (init_section_add): Rename optarg to arg in order to
avoid shadowing a global variable.
