iword rather than expr8 and expr16. When recognizing 'M', use
issbyte rather than expr8. When recognizing 'Q' and 't', just
check for O_constant rather than using expr8.
* config/m68k-parse.h (expr8, expr16): Don't define.
* Makefile.in (m68k-parse.o): Depend upon m68k-parse.h, not
m68k-parse.y.
* configure.in: Consistently use ${target_cpu_type} rather than
${cpu_type} after the loop.
* configure: Rebuild.
* Makefile.in (targ-cpu.o): Use @target_cpu_type@ rather than
@cpu_type@.
including support for Motorola syntax.
* config/m68k-parse.h: New file; definitions shared between
m68k-parse.y and tc-m68k.c.
* config/tc-m68k.c: Include m68k-parse.h.
(enum operand_type): Move to m68k-parse.h, where it is named
m68k_operand_type. Rename all uses. Rearrange somewhat. Add
FPREG. Rename AOFF to DISP. Rename AINDX to BASE. Rename APODX
to POST. Rename APRDX to PRE. Remove AMIND. Rename MSCR to
CONTROL. Remove DINDR.
(struct m68k_exp): Move to m68k-parse.h. Remove e_beg, e_end and
e_seg fields. Rename e_exp to exp. Rename e_siz to size, and
change type to enum m68k_size. Change all uses.
(enum _register): Move to m68k-parse.h, where it is named
m68k_register. Rename all uses. Add ZDATA0-7 and ZADDR0-7.
(struct m68k_op): Move to m68k-parse.h. Change all fields.
(seg): Don't define.
(add_exp): Remove.
(FAIL, OK): Remove.
(m68k_reg_parse): Move to m68k-parse.y, and rewrite.
(SKIP_WHITE, SKIP_W): Remove.
(try_moto_index, try_index): Remove.
(m68k_ip_op): Move to m68k-parse.y, and rewrite to use grammar.
(main): Remove obsolete test function.
(m68k_ip): Extensive changes to use new grammar.
(get_regs): Remove.
(crack_operand): m68k_ip_op now returns 0 on success.
(init_table): Add ssp, zd0-7 and za0-7.
(md_assemble): Make er const. Correct loop over operands when
looking for error message.
(md_begin): Set alt_notend_table for '(' and '@'.
(get_num): Expression is already parsed. Don't set seg.
* configure.in: If cpu_type is m68k, put m68k-parse.o in
extra-objects.
* configure: Rebuild.
* Makefile.in (DISTSTUFF): Add m68k-parse.c.
(BISON): Use ../bison/bison if it exists.
(BISONFLAGS): Define as empty.
(TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
(m68k-parse.c, m68k-parse.o): New targets.
OBJDUMP_FOR_TARGET, NM_FOR_TARGET; they're not used.
(AS_FOR_TARGET, CC_FOR_TARGET, OBJDUMP, OBJDUMP_FOR_TARGET, NM, NM_FOR_TARGET):
Don't define.
(VMS_OTHER_OBJS): Add xmalloc.o and xexit.o from libiberty.
(tooldir): Use exec_prefix, not libdir.
* configure.in: Put AC_DEFINE(sparcv9) on its own line, so that the shell
variable settings associated with it are permanent. For CPUs requiring
bfd_gas=yes, select it based on CPU only, not individual target names. Handle
m68k-hp-hpux*, not just -hpux.
* config/tc-z8k.c (tc_coff_symbol_emit_hook): Add dummy argument to match
prototype in obj-coff.h.
* configure.in: Skip tests for defining WANT_FOPEN_BIN and IBM_COMPILER_SUX.
* acconfig.h: Deleted them.
* configure, conf.in: Rebuild with autoconf 2.0.
* config/go32.cfg, config/vms-conf.h: Updated.
* config/tc-m68k.c (md_apply_fix_2, md_convert_frag_1): Always use
IBM_COMPILER_SUX version of code, with comments indicating why.
* listing.c (file_info): Use text mode when opening file for read. Use "r"
directly, no macro.
* input-file.c (input_file_open): Don't use FOPEN_RT, just use "r".
* read.c (s_include): Ditto.
* output-file.c (output_file_create): Try both "wb" and "w", don't bother with
FOPEN_* macros.
* as.h: Don't include fopen-*.h.
* config/alpha-opcode.h: Make "ret" with no operands equivalent to "ret
zero,(ra)", to match OSF1 and to be consistent with both one-operand forms.
Patches from DJ Delorie:
* as.h (alloca): undef alloca before defining it just in case
* config/go32.cfg: new file for autoconf values
* config/te-go32.h: new file
* configure.bat: new for autoconf
* config/tc-i386.c (md_assemble): Fix typo in GOTPC check; had = for ==.
* configure.in: If target_frag doesn't exist, use /dev/null.
* as.c (parse_args): For non-VMS systems, re-add `v' to std_shortopts. Add
"verbose" to list of long options.
* write.c (adjust_reloc_syms): When generating an absolute section symbol as a
placeholder, don't mark it as used in a relocation entry, here.
* Makefile.in (comparison): Compare using makefile code from gcc, stripped down
to discard subdir stuff and adapted to give a non-zero exit status if either
file differs.
handling of program_transform_name.
* configure.in: Test for "unlink" and "delete", define USE_DELETE_FOR_UNLINK if
only the latter is found. Not expected to be triggered on UNIX/POSIX systems.
* acconfig.h (USE_DELETE_FOR_UNLINK): Undef here, provide comments.
Update for autoconf 1.118:
* gdbinit.in: New file, created from old .gdbinit.
* .gdbinit: Deleted.
* aclocal.m4 (GAS_GDBINIT): Deleted.
* configure.in: Don't use it. Instead, generate .gdbinit from gdbinit.in.
Don't substitute cpu_type, obj_format, emulation, atof. Switched order of
AC_LINK_FILES arguments. Use AC_PREREQ to ensure that older versions of
autoconf aren't used.
* Makefile.in: Added @configure_input@ line.
(configure): Deleted rule.
[regenerated conf.in, configure]
(alloca): Replace alloca-conf.h inclusion with code recommended in autoconf
documentation. Include config.h first.
Makefile.in (INCLUDES): Deleted last patch (using -I..).
* acconfig.h, aclocal.m4: New files.
* configure.in: Rewritten (except for some target-specific code) for autoconf.
* conf.in, configure: New files, generated from the above.
* Makefile.in: Changed magic sequence indicating insertion of makefile
fragments.
(VPATH, srcdir, CC, LIBS, OBJS dependencies): Use @-substitutions from
configure.
(LINKED_HEADERS): Deleted a.out.gnu.h, a.out.h, and host.h.
(config.status, configure): Rewrite rules.
(config-stamp): Depend on conf. Skip variables that configure is now
substituting itself.
(*.o dependencies): Deleted host.h.
(distclean, realclean): Don't delete host.h.
* as.c: Don't include stdio.h, string.h, sys/types.h. Include signal.h after
as.h.
* as.h: Include alloca-conf.h first. Include ctype.h, string.h, strings.h,
stdlib.h, unistd.h, sys/types.h, fopen-bin.h, fopen-same.h, as suggested by
autoconf test results.
[BROKEN_ASSERT]: Don't include assert.h.
(strdup): Declare.
(volatile, const): Define if not __STDC__ and not already defined.
(malloc, realloc) [NEED_MALLOC_DECLARATION]: Declare.
(free) [NEED_FREE_DECLARATION]: Declare.
* gasp.c: Include config.h, stdlib.h (if HAVE_STDLIB_H). Don't include host.h.
(malloc) [NEED_MALLOC_DECLARATION]: Declare.
* messages.c: Include as.h first. Include errno.h only if HAVE_ERRNO_H. If
HAVE_VARARGS_H and not __STDC__, undefine HAVE_STDARG_H. Set NO_STDARG and
NO_VARARGS as appropriate.
* doc/Makefile.in (srcdir, INSTALL, INSTALL_PROGRAM, INSTALL_DATA): Use
autoconf @-substitutions.
* configure.in: Set ALL_OBJ_DEPS in output Makefile.
Based on suggestions from <BAILEY@hmivax.humgen.upenn.edu> (Charles Bailey):
* vmsconf.sh: In generated file, get ".obj" suffix right, build source files
from other directories into objects in the current directory, and specify PSECT
attributes explicitly to linker. Also added missing label.
* Makefile.in (stamp-mk.com): Reference new variable VMS_OTHER_OBJS for list of
non-local object files, instead of listing them here.
(VMS_OTHER_OBJS): New variable, added more libiberty files.
* make-gas.com: Regenerated.
* config/ho-vms.h (unlink): Define as delete.
* config-gas.com: Fix quoting on TARGET_CANONICAL definition. Delete files
before creating them.
(i386-*-netbsd0.8): New target, like 386bsd.
* configure.in: Set BFDDEF in Makefile to "define" or "undef".
* Makefile.in (config.h): Protect against multiple inclusions. Define or undef
BFD_ASSEMBLER as specified by $(BFDDEF).
(ALL_CFLAGS): Omit $(BFDDEF).
* Makefile.in (INCLUDES): Add $(srcdir)/.. to places to search.
* config/obj-ecoff.c: Include files as "bfd/" instead of "../bfd/".
* app.c, flonum.h, hex-value.c (const): Change #if to be more
portable.
