The fall-through in Target_sparc::Relocate::relocate for
R_SPARC_GOTDATA_OP_LOX10 is currently R_SPARC_GOT13, but should
clearly be R_SPARC_GOT10. GCC has been seen to emit a sethi/xor
rather than a sethi/or sequence to load a 32-bit immediate, but
if R_SPARC_GOT13 is used then bits 10-12 get zeroed out as both
the sethi and xor immediates contain them.
gold/
PR gold/20442
* sparc.cc (Target_sparc::Relocate::relocate): R_SPARC_GOTDATA_OP_LOX10
should fall back on R_SPARC_GOT10, not R_SPARC_GOT13.
bfd * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Don't convert
R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.
gold * sparc.cc (Target_sparc::Scan::local): Don't convert R_SPARC_32
to R_SPARC_RELATIVE if class is ELFCLASS64.
(Target_sparc::Scan::global): Likewise.
ld * testsuite/ld-elf/symbolic-func.r: Allow non-zero offsets from
.text.
gold/
PR gold/19019
* layout.h (Layout::add_target_specific_dynamic_tag): New function.
* layout.cc (Layout::add_target_specific_dynamic_tag): New function.
* mips.cc (Target_mips::make_symbol): Adjust function signature.
* sparc.cc (Target_sparc::Target_sparc): Initialize register_syms_.
(Target_sparc::do_is_defined_by_abi): Remove test for
STT_SPARC_REGISTER.
(Target_sparc::Register_symbol): New struct type.
(Target_sparc::register_syms_): New data member.
(Target_sparc<64, true>::sparc_info): Set has_make_symbol to true.
(Target_sparc::make_symbol): New function.
(Target_sparc::do_finalize_sections): Add register symbols and new
dynamic table entries.
* symtab.h (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::add_target_global_symbol): New function.
(Symbol_table::target_symbols_): New data member.
* symtab.cc (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::Symbol_table): Initialize target_symbols_.
(Symbol_table::add_from_object): Pass additional parameters to
Target::make_symbol.
(Symbol_table::define_special_symbol): Likewise.
(Symbol_table::add_undefined_symbol_from_command_line): Pass 0 for
undefined symbol value.
(Symbol_table::set_dynsym_indexes): Process target-specific symbols.
(Symbol_table::sized_finalize): Likewise.
(Symbol_table::sized_write_globals): Likewise.
* target.h (Sized_target::make_symbol): Add name, st_type, object,
st_shndx, and value parameters.
For MIPS-64, the r_info field in the relocation format is
replaced by several individual fields, including r_sym and
r_type. To enable support for this format, I've refactored
target-independent code to remove almost all uses of the r_info
field. (I've left alone a couple of routines used only for
incremental linking, which I can update if/when the MIPS target
adds support for incremental linking.)
For routines that are already templated on a Classify_reloc class
(namely, gc_process_relocs, relocate_section, and
relocate_relocs), I've extended the Classify_reloc interface to
include sh_type (which no longer needs to be a separate template
parameter) as well as get_r_sym() and get_r_type() methods for
extracting the r_sym and r_type fields. For
scan_relocatable_relocs, I've extended the
Default_scan_relocatable_relocs class by converting it to a class
template with Classify_reloc as a template parameter. For the
remaining routines that need to access r_sym, I've added a
virtual Target::get_r_sym() method with an override for the MIPS
target.
In elfcpp, I've added Mips64_rel, etc., accessor classes and
corresponding internal data structures. The MIPS target uses
these new classes within its own Mips_classify_reloc class.
The Mips64_ accessor classes also expose the r_ssym, r_type2,
and r_type3 fields from the relocation.
These changes should be functionally the same for all but the
MIPS target.
elfcpp/
* elfcpp.h (Mips64_rel, Mips64_rel_write): New classes.
(Mips64_rela, Mips64_rela_write): New classes.
* elfcpp_internal.h (Mips64_rel_data, Mips64_rela_data): New structs.
gold/
* gc.h (get_embedded_addend_size): Remove sh_type parameter.
(gc_process_relocs): Remove sh_type template parameter.
Use Classify_reloc to access r_sym, r_type, and r_addend fields.
* object.h (Sized_relobj_file::split_stack_adjust): Add target
parameter.
(Sized_relobj_file::split_stack_adjust_reltype): Likewise.
* reloc-types.h (Reloc_types::copy_reloc_addend): (SHT_REL and SHT_RELA
specializations) Remove.
* reloc.cc (Emit_relocs_strategy): Rename and move to target-reloc.h.
(Sized_relobj_file::emit_relocs_scan): Call Target::emit_relocs_scan().
(Sized_relobj_file::emit_relocs_scan_reltype): Remove.
(Sized_relobj_file::split_stack_adjust): Add target parameter.
Adjust all callers.
(Sized_relobj_file::split_stack_adjust_reltype): Likewise. Call
Target::get_r_sym() to get r_sym field from relocations.
(Track_relocs::next_symndx): Call Target::get_r_sym().
* target-reloc.h (scan_relocs): Remove sh_type template parameter;
add Classify_reloc template parameter. Use for accessing r_sym and
r_type.
(relocate_section): Likewise.
(Default_classify_reloc): New class (renamed and moved from reloc.cc).
(Default_scan_relocatable_relocs): Remove sh_type template parameter.
(Default_scan_relocatable_relocs::Reltype): New typedef.
(Default_scan_relocatable_relocs::reloc_size): New const.
(Default_scan_relocatable_relocs::sh_type): New const.
(Default_scan_relocatable_relocs::get_r_sym): New method.
(Default_scan_relocatable_relocs::get_r_type): New method.
(Default_emit_relocs_strategy): New class.
(scan_relocatable_relocs): Replace sh_type template parameter with
Scan_relocatable_relocs class. Use it to access r_sym and r_type
fields.
(relocate_relocs): Replace sh_type template parameter with
Classify_reloc class. Use it to access r_sym and r_type fields.
* target.h (Target::is_call_to_non_split): Replace r_type parameter
with pointer to relocation. Adjust all callers.
(Target::do_is_call_to_non_split): Likewise.
(Target::emit_relocs_scan): New virtual method.
(Sized_target::get_r_sym): New virtual method.
* target.cc (Target::do_is_call_to_non_split): Replace r_type parameter
with pointer to relocation.
* aarch64.cc (Target_aarch64::emit_relocs_scan): New method.
(Target_aarch64::Relocatable_size_for_reloc): Remove.
(Target_aarch64::gc_process_relocs): Use Default_classify_reloc.
(Target_aarch64::scan_relocs): Likewise.
(Target_aarch64::relocate_section): Likewise.
(Target_aarch64::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_aarch64::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_aarch64::relocate_relocs): Use Default_classify_reloc.
* arm.cc (Target_arm::Arm_scan_relocatable_relocs): Remove sh_type
template parameter.
(Target_arm::emit_relocs_scan): New method.
(Target_arm::Relocatable_size_for_reloc): Replace with...
(Target_arm::Classify_reloc): ...this.
(Target_arm::gc_process_relocs): Use Classify_reloc.
(Target_arm::scan_relocs): Likewise.
(Target_arm::relocate_section): Likewise.
(Target_arm::scan_relocatable_relocs): Likewise.
(Target_arm::relocate_relocs): Likewise.
* i386.cc (Target_i386::emit_relocs_scan): New method.
(Target_i386::Relocatable_size_for_reloc): Replace with...
(Target_i386::Classify_reloc): ...this.
(Target_i386::gc_process_relocs): Use Classify_reloc.
(Target_i386::scan_relocs): Likewise.
(Target_i386::relocate_section): Likewise.
(Target_i386::scan_relocatable_relocs): Likewise.
(Target_i386::relocate_relocs): Likewise.
* mips.cc (Mips_scan_relocatable_relocs): Remove sh_type template
parameter.
(Mips_reloc_types): New class template.
(Mips_classify_reloc): New class template.
(Target_mips::Reltype): New typedef.
(Target_mips::Relatype): New typedef.
(Target_mips::emit_relocs_scan): New method.
(Target_mips::get_r_sym): New method.
(Target_mips::Relocatable_size_for_reloc): Replace with
Mips_classify_reloc.
(Target_mips::copy_reloc): Use Mips_classify_reloc.
(Target_mips::gc_process_relocs): Likewise.
(Target_mips::scan_relocs): Likewise.
(Target_mips::relocate_section): Likewise.
(Target_mips::scan_relocatable_relocs): Likewise.
(Target_mips::relocate_relocs): Likewise.
(mips_get_size_for_reloc): New function, factored out from
Relocatable_size_for_reloc::get_size_for_reloc.
(Target_mips::Scan::local): Use Mips_classify_reloc.
(Target_mips::Scan::global): Likewise.
(Target_mips::Relocate::relocate): Likewise.
* powerpc.cc (Target_powerpc::emit_relocs_scan): New method.
(Target_powerpc::Relocatable_size_for_reloc): Remove.
(Target_powerpc::gc_process_relocs): Use Default_classify_reloc.
(Target_powerpc::scan_relocs): Likewise.
(Target_powerpc::relocate_section): Likewise.
(Powerpc_scan_relocatable_reloc): Convert to class template.
(Powerpc_scan_relocatable_reloc::Reltype): New typedef.
(Powerpc_scan_relocatable_reloc::reloc_size): New const.
(Powerpc_scan_relocatable_reloc::sh_type): New const.
(Powerpc_scan_relocatable_reloc::get_r_sym): New method.
(Powerpc_scan_relocatable_reloc::get_r_type): New method.
(Target_powerpc::scan_relocatable_relocs): Use
Powerpc_scan_relocatable_reloc.
(Target_powerpc::relocate_relocs): Use Default_classify_reloc.
* s390.cc (Target_s390::emit_relocs_scan): New method.
(Target_s390::Relocatable_size_for_reloc): Remove.
(Target_s390::gc_process_relocs): Use Default_classify_reloc.
(Target_s390::scan_relocs): Likewise.
(Target_s390::relocate_section): Likewise.
(Target_s390::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_s390::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_s390::relocate_relocs): Use Default_classify_reloc.
* sparc.cc (Target_sparc::emit_relocs_scan): New method.
(Target_sparc::Relocatable_size_for_reloc): Remove.
(Target_sparc::gc_process_relocs): Use Default_classify_reloc.
(Target_sparc::scan_relocs): Likewise.
(Target_sparc::relocate_section): Likewise.
(Target_sparc::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_sparc::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_sparc::relocate_relocs): Use Default_classify_reloc.
* tilegx.cc (Target_tilegx::emit_relocs_scan): New method.
(Target_tilegx::Relocatable_size_for_reloc): Remove.
(Target_tilegx::gc_process_relocs): Use Default_classify_reloc.
(Target_tilegx::scan_relocs): Likewise.
(Target_tilegx::relocate_section): Likewise.
(Target_tilegx::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_tilegx::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_tilegx::relocate_relocs): Use Default_classify_reloc.
* x86_64.cc (Target_x86_64::emit_relocs_scan): New method.
(Target_x86_64::Relocatable_size_for_reloc): Remove.
(Target_x86_64::gc_process_relocs): Use Default_classify_reloc.
(Target_x86_64::scan_relocs): Likewise.
(Target_x86_64::relocate_section): Likewise.
(Target_x86_64::Relocatable_size_for_reloc::get_size_for_reloc):
Remove.
(Target_x86_64::scan_relocatable_relocs): Use Default_classify_reloc.
(Target_x86_64::relocate_relocs): Use Default_classify_reloc.
* testsuite/testfile.cc (Target_test::emit_relocs_scan): New method.
Some linker code editing needs to change multiple insns. In some
cases multiple relocations are involved and it is not sufficient to
make the changes independently as relocations are processed, because
doing so might lead to a partial edit. So in order to safely edit we
need all the relocations available in relocate(). Also, to emit
edited relocs corresponding to the edited code sequence we need some
way to pass information from relocate() to relocate_relocs(),
particularly if the edit depends on insns. We can't modify input
relocs in relocate() as they are mmapped PROT_READ, nor it is
particularly clean to write relocs to the output at that stage. So
add a Relocatable_relocs* field to relinfo to mark edited relocs.
Given that relocate is passed the raw reloc pointer, it makes sense to
remove the rel/rela parameter and r_type too. However, that means the
mips relocate() needs to know whether SHT_REL or SHT_RELA relocs are
being processed. So add a rel_type for mips, which also has the
benefit of removing relocate() overloading there.
This patch adds the infrastructure without making use of it.
Note that relinfo->rr will be NULL if not outputting relocations.
* object.h (struct Relocate_info): Add "rr".
* reloc.h (Relocatable_relocs::set_strategy): New accessor.
* reloc.cc (Sized_relobj_file::do_relocate_sections): Init
relinfo.rr for relocate_section and relocate_relocs.
* powerpc.cc (relocate): Add rel_type and preloc parameters.
Delete rela and r_type params, instead recalculate these from
preloc.
(relocate_relocs): Delete Relocatable_relocs* param, instead
use relinfo->rr.
* aarch64.cc: Likewise.
* arm.cc: Likewise.
* i386.cc: Likewise.
* mips.cc: Likewise.
* s390.cc: Likewise.
* sparc.cc: Likewise.
* target.h: Likewise.
* tilegx.cc: Likewise.
* x86_64.cc: Likewise.
* testsuite/testfile.cc: Likewise.
* target-reloc.h (relocate_section): Adjust to suit.
(apply_relocation, relocate_relocs): Likewise.
When applying a GOTDATA_OP* relocation to a local symbol, the addend
is being applied after getting the value of the symbol. When the
relocation refers to a merge section, however, the addend must be
provided when computing the symbol value, since the contents of
the section may have been rearranged.
gold/
PR gold/18855
* sparc.cc (Sparc_relocate_functions::gdop_hix22): Remove addend
parameter.
(Sparc_relocate_functions::gdop_lox10): Likewise.
(Target_sparc::Relocate::relocate): Use addend when computing
symbol value for R_SPARC_GOTDATA_OP*.
to access a global as it expects a GOTPCREL relocation. This is really not
necessary as the linker could use a copy relocation to get around it. This
patch enables copy relocations with pie.
Context:
This is useful because currently the GCC compiler with option -fpie makes
every extern global access go through the GOT. That is because the compiler
cannot tell if a global will end up being defined in the executable or not
and is conservative. This ends up hurting performance when the binary is linked
as mostly static where most of the globals do end up being defined in the
executable. By allowing copy relocs with fPIE, the compiler need not generate
a GOTPCREL(GOT access) for any global access. It can safely assume that all
globals will be defined in the executable and generate a PC-relative access
instead. Gold can then create a copy reloc for only the undefined globals.
gold/
* symtab.h (may_need_copy_reloc): Remove check for position independent
code.
* x86_64.cc (Target_x86_64<size>::Scan::global): Add check for no
position independence before pc absolute may_need_copy_reloc call.
Add check for executable output befor pc relative may_need_copy_reloc
call.
* i386.cc: Ditto.
* arm.cc: Ditto.
* sparc.cc: Ditto.
* tilegx.cc: Ditto.
* powerpc.cc: Add check for no position independence before
may_need_copy_reloc calls.
* testsuite/pie_copyrelocs_test.cc: New file.
* testsuite/pie_copyrelocs_shared_test.cc: New file.
* Makefile.am (pie_copyrelocs_test): New test.
* Makefile.in: Regenerate.
against symbols in discarded sections. Pass is_discarded
param.
* arm.cc, * i386.cc, * sparc.cc, * x86_64.cc (Target_*::Scan::local):
Add is_discarded param.
* powerpc (Target_powerpc::Scan::local): Likewise. Use
is_discarded to flag opd entry as discarded. Don't emit dyn
relocs on such entries.
(Target_powerpc::Scan::global): Similarly detect and handle
such opd entries.
(Powerpc_relobj): Replace opd_ent_shndx_ and opd_ent_off_ with
opd_ent_. Update all uses.
(Powerpc_relobj::get_opd_discard, set_opd_discard): New functions.
(Target_powerpc::relocate_section): Zero out discarded opd
entry relocs.
* configure: Regenerate.
gold/
* nacl.cc: New file.
* nacl.h: New file.
* Makefile.am (CCFILES, HFILES): Add them.
* Makefile.in: Regenerate.
* i386.cc (Output_data_plt_i386_nacl): New class.
(Output_data_plt_i386_nacl_exec): New class.
(Output_data_plt_i386_nacl_dyn): New class.
(Target_i386_nacl): New class.
(Target_selector_i386_nacl): New class.
(target_selector_i386): Use it instead of Target_selector_i386.
* x86_64.cc (Output_data_plt_x86_64_nacl): New class.
(Target_x86_64_nacl): New class.
(Target_selector_x86_64_nacl): New class.
(target_selector_x86_64, target_selector_x32): Use it instead of
Target_selector_x86_64.
* arm.cc (Output_data_plt_arm_nacl): New class.
(Target_arm_nacl): New class.
(Target_selector_arm_nacl): New class.
(target_selector_arm, target_selector_armbe): Use it instead of
Target_selector_arm.
* target-select.cc (select_target): Take new Input_file* and off_t
arguments, pass them on to recognize method of selector.
* object.cc (make_elf_sized_object): Update caller.
* parameters.cc (parameters_force_valid_target): Likewise.
* incremental.cc (make_sized_incremental_binary): Likewise.
* target-select.h: Update decl.
(Target_selector::recognize): Take new Input_file* argument,
pass it on to do_recognize.
(Target_selector::do_recognize): Take new Input_file* argument.
* freebsd.h (Target_selector_freebsd::do_recognize): Likewise.
* powerpc.cc (Target_selector_powerpc::do_recognize): Likewise.
* sparc.cc (Target_selector_sparc::do_recognize): Likewise.
* testsuite/testfile.cc (Target_selector::do_recognize): Likewise.
* target.h (Target::Target_info): New members isolate_execinstr
and rosegment_gap.
(Target::isolate_execinstr, Target::rosegment_gap): New methods.
* arm.cc (Target_arm::arm_info): Update initializer.
* i386.cc (Target_i386::i386_info): Likewise.
* powerpc.cc (Target_powerpc::powerpc_info): Likewise.
* sparc.cc (Target_sparc::sparc_info): Likewise.
* x86_64.cc (Target_x86_64::x86_64_info): Likewise.
* testsuite/testfile.cc (Target_test::test_target_info): Likewise.
* layout.cc (Layout::attach_allocated_section_to_segment):
Take new const Target* argument. If target->isolate_execinstr(), act
like --rosegment.
(Layout::find_first_load_seg): Take new const Target* argument;
if target->isolate_execinstr(), reject PF_X segments.
(Layout::relaxation_loop_body): Update caller.
(Layout::set_segment_offsets): If target->isolate_execinstr(),
reset file offset to zero when we hit LOAD_SEG, and then do a second
loop over the segments before LOAD_SEG to reassign offsets after
addresses have been determined. Handle target->rosegment_gap().
(Layout::attach_section_to_segment): Take new const Target* argument;
pass it to attach_allocated_section_to_segment.
(Layout::make_output_section): Update caller.
(Layout::attach_sections_to_segments): Take new const Target* argument;
pass it to attach_section_to_segment.
* gold.cc (queue_middle_tasks): Update caller.
* layout.h (Layout): Update method decls with new arguments.
* arm.cc (Target_arm::Target_arm): Take optional argument for the
Target_info pointer to use.
(Target_arm::do_make_data_plt): New virtual method.
(Target_arm::make_data_plt): New method that calls it.
(Target_arm::make_plt_entry): Use it.
(Output_data_plt_arm::Output_data_plt_arm): Take additional argument
for the section alignment.
(Output_data_plt_arm::do_first_plt_entry_offset): New abstract virtual
method.
(Output_data_plt_arm::first_plt_entry_offset): Call it.
(Output_data_plt_arm::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_arm::get_plt_entry_size): Call it.
(Output_data_plt_arm::do_fill_plt_entry): New abstract virtual method.
(Output_data_plt_arm::fill_plt_entry): New method that calls it.
(Output_data_plt_arm::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_arm::fill_first_plt_entry): New method that calls it.
(Output_data_plt_arm::set_final_data_size): Use get_plt_entry_size
method instead of sizeof(plt_entry).
(Output_data_plt_arm::add_entry): Likewise.
Use first_plt_entry_offset method instead of sizeof(first_plt_entry).
(Target_arm::first_plt_entry_offset): Call method on this->plt_ rather
than static method.
(Target_arm::plt_entry_size): Likewise.
(Output_data_plt_arm::first_plt_entry, Output_data_plt_arm::plt_entry):
Move to ...
(Output_data_plt_arm_standard): ... here, new class.
(Output_data_plt_arm::do_write): Move guts of PLT filling to...
(Output_data_plt_arm_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_arm_standard::do_fill_plt_entry): ... and here.
* x86_64.cc (Output_data_plt_x86_64::Output_data_plt_x86_64):
Take additional argument for the PLT entry size.
(Output_data_plt_x86_64::get_tlsdesc_plt_offset):
Use get_plt_entry_size method rather than plt_entry_size variable.
(Output_data_plt_x86_64::reserve_slot): Likewise.
(Output_data_plt_x86_64::do_adjust_output_section): Likewise.
(Output_data_plt_x86_64::add_entry): Likewise.
(Output_data_plt_x86_64::add_local_ifunc_entry): Likewise.
(Output_data_plt_x86_64::address_for_global): Likewise.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::set_final_data_size): Likewise.
(Output_data_plt_x86_64::first_plt_entry_offset): Likewise.
Make method non-static.
(Output_data_plt_x86_64::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_x86_64::get_plt_entry_size): Just call that.
(Output_data_plt_x86_64::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_x86_64::add_eh_frame): New method to call it.
(Output_data_plt_x86_64::do_fill_first_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_first_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_tlsdesc_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_tlsdesc_entry): New method to call it.
(Output_data_plt_x86_64::plt_entry_size)
(Output_data_plt_x86_64::first_plt_entry)
(Output_data_plt_x86_64::plt_entry)
(Output_data_plt_x86_64::tlsdesc_plt_entry)
(Output_data_plt_x86_64::plt_eh_frame_fde_size)
(Output_data_plt_x86_64::plt_eh_frame_fde): Move to ...
(Output_data_plt_x86_64_standard): ... here, new class.
(Target_x86_64::Target_x86_64): Take optional argument for the
Target_info pointer to use.
(Target_x86_64::do_make_data_plt): New virtual method.
(Target_x86_64::make_data_plt): New method to call it.
(Target_x86_64::init_got_plt_for_update): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_x86_64::init): Don't do add_eh_frame_for_plt here.
(Target_x86_64::first_plt_entry_offset): Call method on this->plt_
rather than static method.
(Target_x86_64::plt_entry_size): Likewise.
(Output_data_plt_x86_64::do_write): Use get_plt_entry_size method
rather than plt_entry_size variable. Move guts of PLT filling to...
(Output_data_plt_x86_64_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_x86_64_standard::do_fill_plt_entry): ... and here ...
(Output_data_plt_x86_64_standard::do_fill_tlsdesc_entry): ... and here.
* i386.cc (Output_data_plt_i386::Output_data_plt_i386): Take
additional argument for the section alignment.
Don't do add_eh_frame_for_plt here.
(Output_data_plt_i386::first_plt_entry_offset): Make the method
non-static. Use get_plt_entry_size method rather than plt_entry_size
variable.
(Output_data_plt_i386::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_i386::get_plt_entry_size): Call it.
(Output_data_plt_i386::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_i386::add_eh_frame): New method to call it.
(Output_data_plt_i386::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_first_plt_entry): New method to call it.
(Output_data_plt_i386::do_fill_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_plt_entry): New method to call it.
(Output_data_plt_i386::set_final_data_size): Use get_plt_entry_size
method instead of plt_entry_size.
(Output_data_plt_i386::plt_entry_size)
(Output_data_plt_i386::plt_eh_frame_fde_size)
(Output_data_plt_i386::plt_eh_frame_fde): Move to ...
(Output_data_plt_i386_standard): ... here, new class.
(Output_data_plt_i386_exec): New class.
(Output_data_plt_i386::exec_first_plt_entry): Move to ...
(Output_data_plt_i386_exec::first_plt_entry): ... here.
(Output_data_plt_i386::exec_plt_entry): Move to ...
(Output_data_plt_i386_exec::plt_entry): ... here.
(Output_data_plt_i386_dyn): New class.
(Output_data_plt_i386::first_plt_entry): Move to ...
(Output_data_plt_i386_dyn::first_plt_entry): ... here.
(Output_data_plt_i386::dyn_plt_entry): Move to ...
(Output_data_plt_i386_dyn::plt_entry): ... here.
(Target_i386::Target_i386): Take optional argument for the Target_info
pointer to use.
(Target_i386::do_make_data_plt): New virtual method.
(Target_i386::make_data_plt): New method to call it.
(Target_i386::make_plt_section): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_i386::add_entry): Use get_plt_entry_size method
rather than plt_entry_size variable.
(Output_data_plt_i386::add_local_ifunc_entry): Likewise.
(Output_data_plt_i386::address_for_local): Likewise.
(Output_data_plt_i386::do_write): Likewise.
Move guts of PLT filling to...
(Output_data_plt_i386_exec::do_fill_first_plt_entry): ... here ...
(Output_data_plt_i386_exec::do_fill_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_first_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_plt_entry): ... and here.
Change-Id: Id24b95600489835ff5e860a39c147203d4380c2b
gold/
* sparc.cc (Target_sparc::Relocate::relax_call): New function.
(Target_sparc::Relocate::relocate): Call it for R_SPARC_WDISP30
and R_SPARC_WPLT30.
gold/
* sparc.cc (class Target_sparc): Add elf_machine_, elf_flags_,
and elf_flags_set_.
(Target_sparc::Target_sparc): Initialize new fields.
(Target_sparc::do_make_elf_object): New function.
(Target_sparc::do_adjust_elf_header): New function.
gold/
* sparc.cc (Target_sparc::got_address): New function.
(Sparc_relocate_functions::gdop_hix22): New function.
(Sparc_relocate_functions::gdop_lox10): New function.
(Target_sparc::Scan::local): Do not emit a GOT entry for GOTDATA
relocs.
(Target_sparc::Scan::local): Likewise if the global symbol is not
preemptible and is not IFUNC.
(Target_sparc::Relocate::relocate): Perform GOTDATA code
transformations for local and non-preemptible non-IFUNC global
symbols.
elfcpp/
* sparc.h (R_SPARC_JMP_IREL): New relocation.
gold/
* sparc.cc (class Target_sparc): Add rela_ifunc_.
(Target_sparc::Target_sparc): Initialize new field.
(Target_sparc::do_plt_section_for_global): New function.
(Target_sparc::do_plt_section_for_local): New function.
(Target_sparc::reloc_needs_plt_for_ifunc): New function.
(Target_sparc::make_plt_section): New function, broken out of
make_plt_entry. Use ORDER_NON_RELRO_FIRST for ".plt".
(Target_sparc::make_plt_entry): Call make_plt_section.
(Target_sparc::make_local_ifunc_plt_entry): New function.
(Target_sparc::rela_ifunc_section): New function.
(Target_sparc::plt_section): Remove const.
(Output_data_plt_sparc): Update declarations. Define Global_ifunc
and Local_ifunc types. Add global_ifuncs_, local_ifuncs_, ifunc_rel_,
and ifunc_count_ fields.
(Output_data_plt_sparc::Output_data_plt_sparc): Initialize new fields.
(Output_data_plt_sparc::add_entry): Handle IFUNC symbols.
(Output_data_plt_sparc::add_local_ifunc_entry): New function.
(Output_data_plt_sparc::rela_ifunc): New function.
(Output_data_plt_sparc::emit_pending_ifunc_relocs): New function.
(Output_data_plt_sparc::has_ifunc_section): New function.
(Output_data_plt_sparc::entry_count): Include ifunc_count_.
(Output_data_plt_sparc::address_for_global): New function.
(Output_data_plt_sparc::address_for_local): New function.
(Output_data_plt_sparc::plt_index_to_offset): New function.
(Output_data_plt_sparc::set_final_data_size): Use plt_index_to_offset
and entry_count.
(Output_data_plt_sparc::do_write): Use first_plt_entry_offset and
entry_count.
(Target_sparc::Scan::get_reference_flags): Add R_SPARC_IRELATIVE and
R_SPARC_JMP_IREL to switch.
(Target_sparc::Scan::check_non_pic): Likewise.
(Target_sparc::Scan::local): Handle IFUNC symbols.
(Target_sparc::Scan::local): Likewise.
(Target_sparc::Relocate::relocate): Likewise, use plt_address_for_global
and plt_address_for_local.
(Target_sparc::do_finalize_sections): Call emit_pending_ifunc_relocs.
Define __rel_iplt_start and __rel_iplt_end if doing a static link.
(Relobj::local_plt_offset): New function.
(Relobj::local_has_got_offset): New function.
(Relobj::local_got_offset): New function.
(Relobj::set_local_got_offset): New function.
(Relobj::do_local_symbol_value): New pure virtual function.
(Relobj::do_local_plt_offset): Likewise.
(Relobj::do_local_has_got_offset): Likewise.
(Relobj::do_local_got_offset): Likewise.
(Relobj::do_set_local_got_offset): Likewise.
(Sized_relobj::do_local_has_got_offset): Rename from
local_has_got_offset.
(Sized_relobj::do_local_got_offset): Rename from local_got_offset.
(Sized_relobj::do_set_local_got_offset): Rename from
set_local_got_offset.
(Sized_relobj_file::do_local_plt_offset): Rename from
local_plt_offset.
(Sized_relobj_file::do_local_symbol_value): New function.
* object.cc (Sized_relobj_file::do_local_plt_offset): Rename from
local_plt_offset.
* output.cc (Output_data_got::Got_entry::write): Change object to
Relobj. Use local_symbol_value.
(Output_data_got::add_global_with_rel): Change rel_dyn to
Output_data_reloc_generic*. Use add_global_generic.
(Output_data_got::add_global_with_rela): Remove. Change all
callers to use add_global_with_rel.
(Output_data_got::add_global_pair_with_rel): Change rel_dyn to
Output_data_reloc_generic*. Use add_global_generic.
(Output_data_got::add_global_pair_with_rela): Remove. Change all
callers to use add_global_pair_with_rel.
(Output_data_got::add_local): Change object to Relobj*.
(Output_data_got::add_local_plt): Likewise.
(Output_data_got::add_local_with_rel): Change object to Relobj*,
change rel_dyn to Output_data_reloc_generic*. Use
add_local_generic.
(Output_data_got::add_local_with_rela): Remove. Change all
callers to use all_local_with_rel.
(Output_data_got::add_local_pair_with_rel): Change object to
Relobj*, change rel_dyn to Output_data_reloc_generic*. Use
add_output_section_generic.
(Output_data_got::add_local_pair_with_rela): Remove. Change all
callers to use add_local_pair_with_rel.
(Output_data_got::reserve_local): Change object to Relobj*.
* output.h: (class Output_data_reloc_generic): Add pure virtual
declarations for add_global_generic, add_local_generic,
add_output_section_generic.
(class Output_data_reloc) [SHT_REL, SHT_RELA]: Implement new
functions for Output_data_reloc_generic. Update declarations for
changes listed in output.cc.
(class Output_data_got): Change template parameter to got_size.
Don't define Rel_dyn or Rela_dyn. Update declarations per above.
* incremental.h (Sized_relobj_incr::do_local_symbol_value): New
function.
(Sized_relobj_incr::do_local_plt_offset): New function.
* copy-relocs.cc (Copy_relocs::Copy_reloc_entry::emit): Call
add_global_generic.
bfd/
PR binutils/13301
* elfxx-sparc.c (sparc_elf_find_reloc_at_ofs): New function.
(_bfd_sparc_elf_relocate_section): Always move the __tls_get_addr
call delay slot instruction forward 4 bytes when performing
relaxation.
gold/
PR binutils/13301
* sparc.cc (Target_sparc::Relocate::reloc_adjust_addr_): New
member to track relocation locations that have moved during TLS
reloc optimizations.
(Target_sparc::Relocate::Relocate): Initialize to NULL.
(Target_sparc::Relocate::relocate): Adjust view down by 4
bytes if it matches reloc_adjust_addr_.
(Target_sparc::Relocate::relocate_tls): Always move the
__tls_get_addr call delay slot instruction forward 4 bytes when
performing relaxation.
ld/testsuite/
* ld-sparc/tlssunbin32.dd: Update for TLS call relaxation fix
for PR 13301.
* ld-sparc/tlssunbin64.dd: Likewise.
* ld-sparc/tlssunpic32.dd: Likewise.
* ld-sparc/tlssunpic64.dd: Likewise.
* gold/output.cc (Output_reloc::Output_reloc): Add use_plt_offset flag.
(Output_reloc::symbol_value): Return PLT offset if flag is set.
* gold/output.h (class Output_reloc): Add use_plt_offset flag.
(Output_reloc::type_): Adjust size of bit field.
(Output_reloc::use_plt_offset_): New bit field.
(class Output_data_reloc): Adjust all calls to Output_reloc_type.
(Output_data_reloc::add_local_relative): (RELA only) Add use_plt_offset
flag. Adjust all callers.
* gold/x86_64.cc (Target_x86_64::Scan::local): Check for IFUNC when
creating RELATIVE relocations.
* target-select.cc (Target_selector::Target_selector): Add
emulation parameter. Change all callers.
(select_target_by_bfd_name): Rename from select_target_by_name.
Change all callers.
(select_target_by_emulation): New function.
(supported_emulation_names): New function.
* target-select.h (class Target_selector): Add emulation_ field.
Update declarations.
(Target_selector::recognize_by_bfd_name): Rename from
recognize_by_name. Change all callers.
(Target_selector::supported_bfd_names): Rename from
supported_names. Change all callers.
(Target_selector::recognize_by_emulation): New function.
(Target_selector::supported_emulations): New function.
(Target_selector::emulation): New function.
(Target_selector::do_recognize_by_bfd_name): Rename from
do_recognize_by_name. Change all callers.
(Target_selector::do_supported_bfd_names): Rename from
do_supported_names. Change all callers.
(Target_selector::do_recognize_by_emulation): New function.
(Target_selector::do_supported_emulations): New function.
(select_target_by_bfd_name): Change name in declaration.
(select_target_by_emulation): Declare.
(supported_emulation_names): Declare.
* parameters.cc (parameters_force_valid_target): Try to find
target based on emulation from -m option.
* options.h (class General_options): Change doc string for -m.
* options.cc (help): Print emulations.
(General_options::parse_V): Likewise.
* freebsd.h (Target_selector_freebsd::Target_selector_freebsd):
Add emulation parameter. Change all callers.
info; adjust display of GOT entries.
* incremental.cc (Sized_incremental_binary::setup_readers): Allocate
vector of input objects; remove file_status_.
(Sized_incremental_binary::do_reserve_layout): Remove file_status_.
(Sized_incremental_binary::do_process_got_plt): Adjust calls to
got_plt reader; call target hooks to reserve GOT entries.
(Output_section_incremental_inputs::set_final_data_size): Adjust size
of input file info header and GOT info entry.
(Output_section_incremental_inputs::write_info_blocks): Write dynamic
relocation info.
(Got_plt_view_info::got_descriptor): Remove.
(Got_plt_view_info::sym_index): New data member.
(Got_plt_view_info::input_index): New data member.
(Local_got_offset_visitor::visit): Write input file index.
(Global_got_offset_visitor::visit): Write 0 for input file index.
(Global_symbol_visitor_got_plt::operator()): Replace got_descriptor
with sym_index and input_index.
(Output_section_incremental_inputs::write_got_plt): Adjust size of
incremental info GOT entry; replace got_descriptor with input_index.
(Sized_relobj_incr::Sized_relobj_incr): Adjust initializers; record
map from input file index to object.
(Sized_relobj_incr::do_layout): Replace direct data member reference
with accessor function.
(Sized_relobj_incr::do_for_all_local_got_entries): Move to base class.
* incremental.h (Incremental_input_entry_reader::get_symbol_offset):
Adjust size of input file info header.
(Incremental_input_entry_reader::get_first_dyn_reloc): New function.
(Incremental_input_entry_reader::get_dyn_reloc_count): New function.
(Incremental_input_entry_reader::get_input_section): Adjust size of
input file info header.
(Incremental_got_plt_reader::Incremental_got_plt_reader): Adjust size
of incremental info GOT entry.
(Incremental_got_plt_reader::get_got_desc): Remove.
(Incremental_got_plt_reader::get_got_symndx): New function.
(Incremental_got_plt_reader::get_got_input_index): New function.
(Sized_incremental_binary::Sized_incremental_binary): Remove
file_status_; add input_objects_.
(Sized_incremental_binary::~Sized_incremental_binary): Remove.
(Sized_incremental_binary::set_file_is_unchanged): Remove.
(Sized_incremental_binary::file_is_unchanged): Remove.
(Sized_incremental_binary::set_input_object): New function.
(Sized_incremental_binary::input_object): New function.
(Sized_incremental_binary::file_status_): Remove.
(Sized_incremental_binary::input_objects_): New data member.
(Sized_relobj_incr): Rename Sized_incr_relobj to this; adjust all
references.
(Sized_relobj_incr::invalid_address): Move to base class.
(Sized_relobj_incr::is_output_section_offset_invalid): Move to base
class.
(Sized_relobj_incr::do_output_section_offset): Likewise.
(Sized_relobj_incr::do_for_all_local_got_entries): Likewise.
(Sized_relobj_incr::section_offsets_): Likewise.
* object.cc (Sized_relobj::do_for_all_local_got_entries): New
function.
(Sized_relobj_file::Sized_relobj_file): Remove local_got_offsets_.
(Sized_relobj_file::layout_section): Replace refs to section_offsets_
with accessor function.
(Sized_relobj_file::do_layout): Likewise.
(Sized_relobj_file::do_layout_deferred_sections): Likewise.
(Sized_relobj_file::do_for_all_local_got_entries): Move to base class.
(Sized_relobj_file::compute_final_local_value): Replace refs to
section_offsets_ with accessor function.
(Sized_relobj_file::do_finalize_local_symbols): Likewise.
* object.h (Relobj::Relobj): Initialize new data members.
(Relobj::add_dyn_reloc): New function.
(Relobj::first_dyn_reloc): New function.
(Relobj::dyn_reloc_count): New function.
(Relobj::first_dyn_reloc_): New data member.
(Relobj::dyn_reloc_count_): New data member.
(Sized_relobj): Rename Sized_relobj_base to this; adjust all
references.
(Sized_relobj::Address): New typedef.
(Sized_relobj::invalid_address): Move here from child class.
(Sized_relobj::Sized_relobj): Initialize new data members.
(Sized_relobj::sized_relobj): New function.
(Sized_relobj::is_output_section_offset_invalid): Move here from
child class.
(Sized_relobj::get_output_section_offset): Likewise.
(Sized_relobj::local_has_got_offset): Likewise.
(Sized_relobj::local_got_offset): Likewise.
(Sized_relobj::set_local_got_offset): Likewise.
(Sized_relobj::do_for_all_local_got_entries): Likewise.
(Sized_relobj::clear_got_offsets): New function.
(Sized_relobj::section_offsets): Move here from child class.
(Sized_relobj::do_output_section_offset): Likewise.
(Sized_relobj::do_set_section_offset): Likewise.
(Sized_relobj::Local_got_offsets): Likewise.
(Sized_relobj::local_got_offsets_): Likewise.
(Sized_relobj::section_offsets_): Likewise.
(Sized_relobj_file): Rename Sized_relobj to this; adjust all
references.
(Sized_relobj_file::is_output_section_offset_invalid): Move to base
class.
(Sized_relobj_file::sized_relobj): New function
(Sized_relobj_file::local_has_got_offset): Move to base class.
(Sized_relobj_file::local_got_offset): Likewise.
(Sized_relobj_file::set_local_got_offset): Likewise.
(Sized_relobj_file::get_output_section_offset): Likewise.
(Sized_relobj_file::do_for_all_local_got_entries): Likewise.
(Sized_relobj_file::do_output_section_offset): Likewise.
(Sized_relobj_file::do_set_section_offset): Likewise.
(Sized_relobj_file::Local_got_offsets): Likewise.
(Sized_relobj_file::local_got_offsets_): Likewise.
(Sized_relobj_file::section_offsets_): Likewise.
* output.cc (Output_reloc::Output_reloc): Adjust type of relobj
(all constructors).
(set_needs_dynsym_index): Convert relobj to derived class pointer.
(Output_reloc::get_symbol_index): Likewise.
(Output_reloc::local_section_offset): Likewise.
(Output_reloc::get_address): Likewise.
(Output_reloc::symbol_value): Likewise.
(Output_data_got::reserve_slot): Move to class definition.
(Output_data_got::reserve_local): New function.
(Output_data_got::reserve_slot_for_global): Remove.
(Output_data_got::reserve_global): New function.
* output.h (Output_reloc::Output_reloc): Adjust type of relobj
(all constructors, two instantiations).
(Output_reloc::get_relobj): New function (two instantiations).
(Output_reloc::u1_.relobj, Output_reloc::u2_.relobj): Adjust type.
(Output_data_reloc_base::add): Convert relobj to derived class pointer.
(Output_data_reloc::add_global): Adjust type of relobj.
(Output_data_reloc::add_global_relative): Likewise.
(Output_data_reloc::add_symbolless_global_addend): Likewise.
(Output_data_reloc::add_local): Likewise.
(Output_data_reloc::add_local_relative): Likewise.
(Output_data_reloc::add_symbolless_local_addend): Likewise.
(Output_data_reloc::add_local_section): Likewise.
(Output_data_reloc::add_output_section): Likewise.
(Output_data_reloc::add_absolute): Likewise.
(Output_data_reloc::add_target_specific): Likewise.
(Output_data_got::reserve_slot): Move definition here.
(Output_data_got::reserve_local): New function.
(Output_data_got::reserve_global): New function.
* reloc.cc (Sized_relobj_file::do_read_relocs): Replace refs to
section_offsets_ with accessor function.
(Sized_relobj_file::write_sections): Likewise.
(Sized_relobj_file::do_relocate_sections): Likewise.
* target.h (Sized_target::reserve_local_got_entry): New function.
(Sized_target::reserve_global_got_entry): New function.
* x86_64.cc (Target_x86_64::reserve_local_got_entry): New function.
(Target_x86_64::reserve_global_got_entry): New function.
(Target_x86_64::init_got_plt_for_update): Create rela_dyn section.
* symtab.h (Symbol::NON_PIC_REF): Remove.
(Symbol::RELATIVE_REF, Symbol::TLS_REF): New Reference_flags.
(Symbol::FUNCTION_CALL): Renumber. Reword comment.
(Symbol::needs_dynamic_reloc): Don't check NON_PIC_REF.
(Symbol::use_plt_offset): Take a flags argument and pass it
directly to needs_dynamic_reloc. Restrict check for undefined
weak symbols to function calls.
* arm.cc (Target_arm::Scan::get_reference_flags): New function.
(Target_arm::Scan::global): Use it.
(Target_arm::Scan::scan_reloc_for_stub): Likewise.
(Target_arm::Relocate::relocate): Likewise.
(Target_arm::Relocate::should_apply_static_reloc): Replace flags
parameter with an r_type parameter. Use get_reference_flags
to get the flags.
(Target_arm::Relocate::relocate): Update accordingly.
* i386.cc (Target_i386::Scan::get_reference_flags): New function.
(Target_i386::Scan::reloc_needs_plt_for_ifunc): Use it.
(Target_i386::Scan::global): Likewise.
(Target_i386::Relocate::relocate): Likewise.
(Target_i386::Relocate::should_apply_static_reloc): Replace flags
parameter with an r_type parameter. Use get_reference_flags
to get the flags.
(Target_i386::Relocate::relocate): Update accordingly.
* powerpc.cc (Target_powerpc::Scan::get_reference_flags): New function.
(Target_powerpc::Scan::global): Use it.
(Target_powerpc::Scan::scan_reloc_for_stub): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
* sparc.cc (Target_sparc::Scan::get_reference_flags): New function.
(Target_sparc::Scan::global): Use it.
(Target_sparc::Scan::scan_reloc_for_stub): Likewise.
(Target_sparc::Relocate::relocate): Likewise.
* x86_64.cc (Target_x86_64::Scan::get_reference_flags): New function.
(Target_x86_64::Scan::reloc_needs_plt_for_ifunc): Use it.
(Target_x86_64::Scan::global): Likewise.
(Target_x86_64::Relocate::relocate): Likewise.
* elfcpp.h (enum SHT): Add SHT_GNU_INCREMENTAL_GOT_PLT.
gold/ChangeLog:
* arm.cc (Target_arm::got_size): Add const.
(Target_arm::got_entry_count): New function.
(Target_arm::plt_entry_count): New function.
(Target_arm::first_plt_entry_offset): New function.
(Target_arm::plt_entry_size): New function.
(Output_data_plt_arm::entry_count): New function.
(Output_data_plt_arm::first_plt_entry_offset): New function.
(Output_data_plt_arm::get_plt_entry_size): New function.
* i386.cc (Target_i386::got_size): Add const.
(Target_i386::got_entry_count): New function.
(Target_i386::plt_entry_count): New function.
(Target_i386::first_plt_entry_offset): New function.
(Target_i386::plt_entry_size): New function.
(Output_data_plt_i386::entry_count): New function.
(Output_data_plt_i386::first_plt_entry_offset): New function.
(Output_data_plt_i386::get_plt_entry_size): New function.
* incremental-dump.cc (dump_incremental_inputs): Adjust call to
find_incremental_inputs_sections. Dump incremental_got_plt section.
* incremental.cc: Include target.h.
(Sized_incremental_binary::do_find_incremental_inputs_sections): Add
parameter. Adjust all callers. Find incremental_got_plt section.
(Incremental_inputs::create_data_sections): Create incremental_got_plt
section.
(Output_section_incremental_inputs::set_final_data_size): Calculate
size of incremental_got_plt section.
(Output_section_incremental_inputs::do_write): Write the
incremental_got_plt section.
(Got_plt_view_info): New struct.
(Local_got_offset_visitor): New class.
(Global_got_offset_visitor): New class.
(Global_symbol_visitor_got_plt): New class.
(Output_section_incremental_inputs::write_got_plt): New function.
* incremental.h (Incremental_binary::find_incremental_inputs_sections):
Add parameter. Adjust all callers.
(Incremental_binary::do_find_incremental_inputs_sections): Likewise.
(Incremental_inputs::got_plt_section): New function.
(Incremental_inputs::got_plt_section_): New data member.
(Incremental_got_plt_reader): New class.
* layout.cc (Layout::create_incremental_info_sections): Add the
incremental_got_plt section.
* object.h (Got_offset_list::get_list): New function.
(Got offset_list::for_all_got_offsets): New function.
(Sized_relobj::local_got_offset_list): New function.
* powerpc.cc (Target_powerpc::got_size): Add const.
(Target_powerpc::got_entry_count): New function.
(Target_powerpc::plt_entry_count): New function.
(Target_powerpc::first_plt_entry_offset): New function.
(Target_powerpc::plt_entry_size): New function.
(Output_data_plt_powerpc::entry_count): New function.
(Output_data_plt_powerpc::first_plt_entry_offset): New function.
(Output_data_plt_powerpc::get_plt_entry_size): New function.
* sparc.cc (Target_sparc::got_size): Add const.
(Target_sparc::got_entry_count): New function.
(Target_sparc::plt_entry_count): New function.
(Target_sparc::first_plt_entry_offset): New function.
(Target_sparc::plt_entry_size): New function.
(Output_data_plt_sparc::entry_count): New function.
(Output_data_plt_sparc::first_plt_entry_offset): New function.
(Output_data_plt_sparc::get_plt_entry_size): New function.
* symtab.h (Symbol::got_offset_list): New function.
(Symbol_table::for_all_symbols): New function.
* target.h (Sized_target::got_entry_count): New function.
(Sized_target::plt_entry_count): New function.
(Sized_target::plt_entry_size): New function.
* x86_64.cc (Target_x86_64::got_size): Add const.
(Target_x86_64::got_entry_count): New function.
(Target_x86_64::plt_entry_count): New function.
(Target_x86_64::first_plt_entry_offset): New function.
(Target_x86_64::plt_entry_size): New function.
(Output_data_plt_x86_64::entry_count): New function.
(Output_data_plt_x86_64::first_plt_entry_offset): New function.
(Output_data_plt_x86_64::get_plt_entry_size): New function.
paramter to the call to gold::gc_process_relocs.
* i386.cc (Target_i386<big_endian>::gc_process_relocs): Add template
paramter to the call to gold::gc_process_relocs.
* x86_64.cc (Target_x86_64<big_endian>::gc_process_relocs): Add template
parameter to the call to gold::gc_process_relocs.
* powerpc.cc (Target_powerpc<big_endian>::gc_process_relocs): Add
template parameter to the call to gold::gc_process_relocs.
* sparc.cc (Target_sparc<big_endian>::gc_process_relocs): Add template
paramter to the call to gold::gc_process_relocs.
* gc.h (get_embedded_addend_size): New function.
(gc_process_relocs): Save the size of the reloc for use by ICF.
* icf.cc (get_section_contents): Get the addend from the text section
for SHT_REL relocation sections.
* icf.h (Icf::Reloc_addend_size_info): New typedef.
(Icf::Reloc_info): Add new member reloc_addend_size_info.
* int_encoding.h (read_from_pointer): New overloaded function.
* testsuite/Makefile.am (icf_sht_rel_addend_test): New test.
* testsuite/icf_sht_rel_addend_test.sh: New file.
* testsuite/icf_sht_rel_addend_test_1.cc: New file.
* testsuite/icf_sht_rel_addend_test_2.cc: New file.
* arm.cc (Scan::local_reloc_may_be_function_pointer): New function.
(Scan::global_reloc_may_be_function_pointer): New function.
* sparc.cc (Scan::local_reloc_may_be_function_pointer): New function.
(Scan::global_reloc_may_be_function_pointer): New function.
* powerpc.cc (Scan::local_reloc_may_be_function_pointer): New function.
(Scan::global_reloc_may_be_function_pointer): New function.
* i386.cc (Scan::local_reloc_may_be_function_pointer): New function.
(Scan::global_reloc_may_be_function_pointer): New function.
* x86_64.cc (Scan::local_reloc_may_be_function_pointer): New function.
(Scan::global_reloc_may_be_function_pointer): New function.
(Scan::possible_function_pointer_reloc): New function.
(Target_x86_64::can_check_for_function_pointers): New function.
* gc.h (gc_process_relocs): Scan relocation types to determine if
function pointers were taken for targets that support it.
* icf.cc (Icf::find_identical_sections): Include functions for
folding in safe ICF whose pointer is not taken.
* icf.h (Secn_fptr_taken_set): New typedef.
(fptr_section_id_): New member.
(section_has_function_pointers): New function.
(set_section_has_function_pointers): New function.
(check_section_for_function_pointers): New function.
* options.h: Fix comment for safe ICF option.
* target.h (can_check_for_function_pointers): New function.
* testsuite/Makefile.am: Add icf_safe_so_test test case.
Modify icf_safe_test for X86-64.
* testsuite/Makefile.in: Regenerate.
* testsuite/icf_safe_so_test.cc: New file.
* testsuite/icf_safe_so_test.sh: New file.
* testsuite/icf_safe_test.cc (kept_func_3): New function.
(main): Change to take pointer to function kept_func_3.
* testsuite/icf_safe_test.sh (arch_specific_safe_fold): Check if safe
folding is done correctly for X86-64.
that takes two Output_data objects.
(Output_data_dynamic::Dynamic_entry): Create storage for secondary
entry param. Handle it in initializers.
* output.cc (Output_data_dynamic::Dynamic_entry::write): For
DYNAMIC_SECTION_SIZE, add in second object size if non-NULL.
* layout.h (Layout::add_target_dynamic_tags): Add dynrel_includes_plt
arg.
* layout.cc (Layout::add_target_dynamic_tags): If dynrel_includes_plt,
and .rela.plt exists, set DT_REL{,A}SZ to sum of .rela.dyn and .rela.plt
* arm.cc (Target_arm::do_finalize_sections): Update to pass false
for dynrel_includes_plt.
* i386.cc (Target_i386::do_finalize_sections): Likewise.
* x86_64.cc (Target_x86_64::do_finalize_sections): Likewise.
* sparc.cc (Target_sparc::make_plt_entry): Force .rela.dyn to be output
before .rela.plt
(Target_sparc::do_finalize_sections): Update to pass true for
dynrel_includes_plt.
* powerpc.cc (Target_powerpc::make_plt_entry): Force .rela.dyn to be
output before .rela.plt
(Target_powerpc::do_finalize_sections): Update to pass true for
dynrel_includes_plt when 32-bit.
2010-02-08 David S. Miller <davem@davemloft.net>
* sparc.cc (Target_sparc::Relocate::relocate): If relocation offset is
unaligned for R_SPARC_16, R_SPARC_32, or R_SPARC_64, use the unaligned
relocation helper function.
