The "set serial parity" command allows the user to control which
parity to use when communicating over a serial connection, rather
than having the parity hardcoded to none.
gdb/ChangeLog:
* NEWS: Mention set/show serial parity command.
* monitor.c (monitor_open): Call serial_setparity.
* remote.c (remote_open_1): Likewise.
* ser-base.c (ser_base_serparity): New function.
* ser-base.h (ser_base_setparity): Add declaration.
* ser-go32.c (dos_ops): Set "setparity" field.
* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
state.Parity.
(ser_windows_setparity): New function.
(hardwire_ops): Add ser_windows_setparity.
(tty_ops): Add NULL for setparity field.
(pipe_ops): Add ser_base_setparity.
(tcp_ops): Likewise.
* ser-pipe.c (pipe_ops): Likewise.
* ser-tcp.c (tcp_ops): Likewise.
* ser-unix.c (hardwire_setparity): Add declaration.
(hardwire_raw): Don't reset PARENB flag.
(hardwire_setparity): New function.
(hardwire_ops): Add hardwire_setparity.
* serial.c (serial_setparity): New function.
(serial_parity): New global.
(parity_none, parity_odd, parity_even, parity_enums, parity):
New static globals.
(set_parity): New function.
(_initialize_serial): Add set/show serial parity commands.
* serial.h (GDBPARITY_NONE): Define.
(GDBPARITY_ODD): Define.
(GDBPARITY_EVEN): Define.
(serial_setparity) Add declaration.
(struct serial_ops): Add setparity field.
* target.h (serial_parity): Add declaration.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote configuration): Document "set/show
serial parity" command.
This bug appears to be caused by bad debuginfo. The method
causing the sefault in the reporter's test case is marked both static
and virtual.
This patch simply safegaurds against this case in dwarf2_add_member_fn,
where the code assumes that there is a `this' pointer when a virtual method
is seen (more specifically, when DW_AT_vtable_elem is seen).
It previously dereferenced the first formal parameter
(`this' pointer), which in this case doesn't exist. GDB consequently
segfaulted dereferencing a NULL pointer.
gdb/ChangeLog
PR gdb/18021
* dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
if we find a static method with DW_AT_vtable_elem_location.
gdb/testsuite/ChangeLog
PR gdb/18021
* gdb.dwarf2/staticvirtual.exp: New test.
gdb/ChangeLog:
* tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
before the second loop, to avoid undefined behavior. Reported by
Anton Blanchard <anton@samba.org>.
This patch introduces a linked list for dynamic attributes of a type.
This is a pre-work for the Fortran dynamic array support. The Fortran
dynamic array support will add more dynamic attributes to a type.
As only a few types will have such dynamic attributes set, a linked
list is more efficient in terms of memory consumption than adding
multiple attributes to main_type.
gdb/ChangeLog:
* gdbtypes.c (resolve_dynamic_type_internal): Adapt
data_location usage to linked list.
(resolve_dynamic_type_internal): Adapt data_location to
linked list.
(get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
(copy_type_recursive, copy_type): Add copy of linked list.
* gdbtypes.h (enum dynamic_prop_node_kind): New enum.
(struct dynamic_prop_list): New struct.
* dwarf2read.c (set_die_type): Set data_location data.
/home/pedro/gdb/mygit/src/gdb/i386-sol2-tdep.c: In function ‘const char* i386_sol2_static_transform_name(const char*)’:
/home/pedro/gdb/mygit/src/gdb/i386-sol2-tdep.c:93:29: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
p = strrchr (name, '.');
^
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
inner block and make it const.
* machoread.c (get_archive_prefix_len): Make "lparen" const.
/home/pedro/gdb/mygit/src/gdb/xcoffread.c: In function ‘void scan_xcoff_symtab(objfile*)’:
/home/pedro/gdb/mygit/src/gdb/xcoffread.c:2644:33: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
p = strchr (namestring, ':');
^
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
Hi,
I am looking at the following fails in aarch64-linux,
stepi^M
47 NOP; /* after permanent bp */^M
(gdb) FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: stepi signal with handler: single-step to handler
the test expects GDB single step into signal handler, but GDB doesn't.
The code in infrun.c:resume
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
continue and we will hit it anyway. */
if (gdbarch_cannot_step_breakpoint (gdbarch))
step = 0;
change the intended action from "step" to "continue". The gdbarch method
cannot_step_breakpoint isn't documented well, and I don't get much clue
after explore the history. However, from the comments above,
aarch64-linux can step a breakpoint instruction, so don't need to call
set_gdbarch_cannot_step_breakpoint.
gdb:
2015-03-20 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdbarch_init): Don't call
set_gdbarch_cannot_step_breakpoint.
On GNU/Linux, this test sometimes FAILs like this:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/killed
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
ptrace: No such process.
(gdb)
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
FAIL: gdb.threads/killed.exp: run program to completion (timeout)
Note the suspicious "No such process" line (that's errno==ESRCH).
Adding debug output we see:
linux_nat_wait: [process -1], [TARGET_WNOHANG]
LLW: enter
LNW: waitpid(-1, ...) returned 18465, ERRNO-OK
LLW: waitpid 18465 received Stopped (signal) (stopped)
LNW: waitpid(-1, ...) returned 18461, ERRNO-OK
LLW: waitpid 18461 received Trace/breakpoint trap (stopped)
LLW: Handling extended status 0x03057f
LHEW: Got clone event from LWP 18461, new child is LWP 18465
LNW: waitpid(-1, ...) returned 0, ERRNO-OK
RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0
RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0
sigchld
ptrace: No such process.
(gdb) linux_nat_wait: [process -1], [TARGET_WNOHANG]
LLW: enter
LNW: waitpid(-1, ...) returned 18465, ERRNO-OK
LLW: waitpid 18465 received Killed (terminated)
LLW: LWP 18465 exited.
LNW: waitpid(-1, ...) returned 18461, No child processes
LLW: waitpid 18461 received Killed (terminated)
Process 18461 exited
LNW: waitpid(-1, ...) returned -1, No child processes
LLW: exit
sigchld
infrun: target_wait (-1, status) =
infrun: 18461 [process 18461],
infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL
infrun: TARGET_WAITKIND_SIGNALLED
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
infrun: stop_waiting
FAIL: gdb.threads/killed.exp: run program to completion (timeout)
The issue is that here:
RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0
RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0
The first line shows we had just resumed LWP 18465, which does:
void *
child_func (void *dummy)
{
kill (pid, SIGKILL);
exit (1);
}
So if the kernel manages to schedule that thread fast enough, the
process may be killed before GDB has a chance to resume LWP 18461.
GDBserver has code at the tail end of linux_resume_one_lwp to cope
with this:
~~~
ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, lwpid_of (thread),
(PTRACE_TYPE_ARG3) 0,
/* Coerce to a uintptr_t first to avoid potential gcc warning
of coercing an 8 byte integer to a 4 byte pointer. */
(PTRACE_TYPE_ARG4) (uintptr_t) signal);
current_thread = saved_thread;
if (errno)
{
/* ESRCH from ptrace either means that the thread was already
running (an error) or that it is gone (a race condition). If
it's gone, we will get a notification the next time we wait,
so we can ignore the error. We could differentiate these
two, but it's tricky without waiting; the thread still exists
as a zombie, so sending it signal 0 would succeed. So just
ignore ESRCH. */
if (errno == ESRCH)
return;
perror_with_name ("ptrace");
}
~~~
However, that's not a complete fix, because between starting to handle
the resume request and getting that PTRACE_CONTINUE, we run other
ptrace calls that can also fail with ESRCH, and that end up throwing
an error (with perror_with_name).
In the case above, I indeed sometimes see resume_stopped_resumed_lwps
fail in the registers read:
resume_stopped_resumed_lwps (struct lwp_info *lp, void *data)
{
...
CORE_ADDR pc = regcache_read_pc (regcache);
Or e.g., in 32-bit mode, i386_linux_resume has several calls that can
throw too.
Whether to ignore ptrace errors or not depends on context that is only
available somewhere up the call chain. So the fix is to let ptrace
errors throw as they do today, and wrap the resume request in a
TRY/CATCH that swallows it iff the lwp that we were trying to resume
is no longer ptrace-stopped.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_resume_one_lwp): Rename to ...
(linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
instead call perror_with_name.
(check_ptrace_stopped_lwp_gone): New function.
(linux_resume_one_lwp): Reimplement as wrapper around
linux_resume_one_lwp_throw that swallows errors if the LWP is
gone.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_resume_one_lwp): Rename to ...
(linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
instead call perror_with_name.
(check_ptrace_stopped_lwp_gone): New function.
(linux_resume_one_lwp): Reimplement as wrapper around
linux_resume_one_lwp_throw that swallows errors if the LWP is
gone.
(resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
swallows errors if the LWP is gone. Use
linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
Wanting to make sure the new continue-pending-status.exp test tests
both cases of threads 2 and 3 reporting an event, I added counters to
the test, to make it FAIL if events for both threads aren't seen.
Assuming a well behaved backend, and given a reasonable number of
iterations, it should PASS.
However, running that against GNU/Linux gdbserver, I found that
surprisingly, that FAILed. GDBserver always reported the breakpoint
hit for the same thread.
Turns out that I broke gdbserver's thread event randomization
recently, with git commit 582511be ([gdbserver] linux-low.c: better
starvation avoidance, handle non-stop mode too). In that commit I
missed that the thread structure also has a status_pending_p field...
The end result was that count_events_callback always returns 0, and
then if no thread is stepping, select_event_lwp always returns the
event thread. IOW, no randomization is happening at all. Quite
curious how all the other changes in that patch were sufficient to fix
non-stop-fair-events.exp anyway even with that broken.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (count_events_callback, select_event_lwp_callback):
Use the lwp's status_pending_p field, not the thread's.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.exp (saw_thread_2)
(saw_thread_3): New globals.
(top level): Increment them when an event for the corresponding
thread is seen.
(no thread starvation): New test.
If the linux_nat_resume's short-circuits the resume because the
current thread has a pending status, and, a thread with a higher
number was previously stopped for a breakpoint, GDB internal errors,
like:
/home/pedro/gdb/mygit/src/gdb/linux-nat.c:2590: internal-error: status_callback: Assertion `lp->status != 0' failed.
Fix this by make status_callback bail out earlier. GDBserver is
already doing the same.
New test added that exercises this.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (status_callback): Return early if the LWP has no
status pending.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.c: New file.
* gdb.threads/continue-pending-status.exp: New file.
This function (in both GDB and GDBserver) used to consider only
SIGTRAP/breakpoint events, but that's no longer the case nowadays.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (select_event_lwp_callback): Update comments to
no longer mention SIGTRAP.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (select_event_lwp_callback): Update comment to no
longer mention SIGTRAP.
Unwind info in system dlls uses almost all possible codes, contrary to unwind
info generated by gcc. A few issues have been discovered: incorrect handling
of SAVE_NONVOL opcodes and incorrect in prologue range checks. Furthermore I
added comments not to forget what has been investigated.
gdb/ChangeLog:
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
redirection code to ...
(amd64_windows_frame_decode_insns): ... Here. Fix in prologue
checks. Fix SAVE_NONVOL operations. Add debug code and comments.
This commit makes support for the "vFile:fstat" packet be detected
by probing rather than using qSupported, for consistency with the
other vFile: packets.
gdb/ChangeLog:
(remote_protocol_features): Remove the "vFile:fstat" feature.
(remote_hostio_fstat): Probe for "vFile:fstat" support.
gdb/doc/ChangeLog:
* gdb.texinfo (General Query Packets): Remove documentation
for now-removed vFile:fstat qSupported features.
gdb/gdbserver/ChangeLog:
* server.c (handle_query): Do not report vFile:fstat as supported.
Hi,
This patch is to support catch syscall on aarch64 linux. We
implement gdbarch method get_syscall_number for aarch64-linux,
and add aarch64-linux.xml file, which looks straightforward, however
the changes to test case doesn't.
First of all, we enable catch-syscall.exp on aarch64-linux target,
but skip the multi_arch testing on current stage. I plan to touch
multi arch debugging on aarch64-linux later.
Then, when I run catch-syscall.exp on aarch64-linux, gcc errors that
SYS_pipe isn't defined. We find that aarch64 kernel only has pipe2
syscall and libc already convert pipe to pipe2. As a result, I change
catch-syscall.c to use SYS_pipe if it is defined, otherwise use
SYS_pipe2 instead. The vector all_syscalls in catch-syscall.exp can't
be pre-determined, so I add a new proc setup_all_syscalls to fill it,
according to the availability of SYS_pipe.
Regression tested on {x86_64, aarch64}-linux x {native, gdbserver}.
gdb:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* aarch64-linux-tdep.c: Include xml-syscall.h
(aarch64_linux_get_syscall_number): New function.
(aarch64_linux_init_abi): Call
set_gdbarch_get_syscall_number.
* syscalls/aarch64-linux.xml: New file.
gdb/testsuite:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
variable.
* gdb.base/catch-syscall.exp: Don't skip it on
aarch64*-*-linux* target. Remove elements in all_syscalls.
(test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
target.
(setup_all_syscalls): New proc.
Forward declarations of struct stat break the Windows build.
This commit removes a forward declaration of struct stat and
includes sys/stat.h directly instead.
gdb/ChangeLog:
PR gdb/18131
* common/common-remote-fileio.h (sys/stat.h): New include.
(stuct stat): Remove forward declaration.
Without this, not all registers were present in the core generated by
gcore. For example, running 'gcore' on a program without examining
the vector registers (SSE or AVX) would store all the vector registers
as zeros because they were not pulled into the regcache. Running
'info vector' before 'gcore' would store the correct values in the
core since it populated the regcache. For Linux processes, a similar
operation is achieved by having the thread iterator callback invoke
target_fetch_registers on each thread before its corresponding
register notes are dumped.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
before writing core register notes.
Fixes linking an --enable-build-with-cxx build on mingw:
../readline/terminal.c:278: undefined reference to `tgetnum'
../readline/terminal.c:297: undefined reference to `tgetnum'
../readline/libreadline.a(terminal.o): In function `get_term_capabilities':
../readline/terminal.c:427: undefined reference to `tgetstr'
../readline/libreadline.a(terminal.o): In function `_rl_init_terminal_io':
[etc.]
gdb/ChangeLog:
2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
Pedro Alves <palves@redhat.com>
* gdb_curses.h (tgetnum): Mark with EXTERN_C.
* stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
(tgoto): Wrap with extern "C".
src/gdb/stub-termcap.c: In function 'int tputs(char*, int, int (*)())':
src/gdb/stub-termcap.c:67:22: error: too many arguments to function
outfun (*string++);
^
gdb/ChangeLog:
2015-03-16 Pedro Alves <palves@redhat.com>
Yuanhui Zhang <asmwarrior@gmail.com>
* stub-termcap.c (tputs): Change prototype.
Building mingw GDB with --enable-build-with-cxx shows:
../../binutils-gdb/gdb/windows-nat.c: At global scope:
../../binutils-gdb/gdb/windows-nat.c:192:1: error: conflicting declaration 'typedef struct thread_info_struct thread_info'
thread_info;
^
In file included from ../../binutils-gdb/gdb/windows-nat.c:52:0:
../../binutils-gdb/gdb/gdbthread.h:160:8: error: 'struct thread_info' has a previous declaration as 'struct thread_info'
struct thread_info
^
Simply rename the structure to avoid the conflict.
gdb/ChangeLog:
2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
Pedro Alves <palves@redhat.com>
* windows-nat.c (struct thread_info_struct): Rename to ...
(struct windows_thread_info_struct): ... this.
(thread_info): Rename to ...
(windows_thread_info): ... this.
All users updated.
gdb/ChangeLog
2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* NEWS: New Removed targets and native configurations.
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6. But coincidentally such UNICes are no longer
really supported by GDB. Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.
In mail
Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
Message-ID: <20140211034157.GG5485@adacore.com>
https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:
So I chose HP-UX first for this patch.
gdb/ChangeLog
2014-10-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove HPUX.
* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
ia64-hpux-tdep.h, solib-ia64-hpux.h.
(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
hppa-hpux-tdep.c.
* config/ia64/hpux.mh: Remove file.
* config/pa/hpux.mh: Remove file.
* configure: Rebuilt.
* configure.ac (dlgetmodinfo, somread.o): Remove.
* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
(ia64-*-hpux*): Remove its float format exception.
* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
* hppa-hpux-nat.c: Remove file.
* hppa-hpux-tdep.c: Remove file.
* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
Move them here from hppa-tdep.h
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
Move them to hppa-tdep.c.
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
declarations.
* ia64-hpux-nat.c: Remove file.
* ia64-hpux-tdep.c: Remove file.
* ia64-hpux-tdep.h: Remove file.
* inf-ttrace.c: Remove file.
* inf-ttrace.h: Remove file.
* solib-ia64-hpux.c: Remove file.
* solib-ia64-hpux.h: Remove file.
* solib-pa64.c: Remove file.
* solib-pa64.h: Remove file.
* solib-som.c: Remove file.
* solib-som.h: Remove file.
* somread.c: Remove file.
Use kinfo_getvmmap from libutil on FreeBSD to enumerate memory
regions in a running process instead of /proc/<pid>/map. FreeBSD systems
do not mount procfs by default, but kinfo_getvmmap uses a sysctl that
is always available.
Skip memory regions for devices as well as regions an application has
requested to not be dumped via the MAP_NOCORE flag to mmap or
MADV_NOCORE advice to madvise.
gdb/ChangeLog:
* configure.ac: AC_CHECK_LIB(util, kinfo_getvmmap).
* configure: Regenerate.
* config.in: Regenerate.
* fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
define.
(fbsd_find_memory_regions): Use kinfo_getvmmap to
enumerate memory regions if present.
- Do not leave operators at end-of-line.
- Fix block indentation in if-else chain.
gdb/ChangeLog:
* amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
* i386fbsd-tdep.c: Fix style in various gdb_static_assert
expressions.
(i386fbsd_sigtramp_p): Likewise.
This commit creates the "set/show sysroot" commands using
add_setshow_optional_filename_cmd to allow the sysroot to
be restored to empty after being set.
gdb/ChangeLog:
* solib.c (_initialize_solib): Make "set/show sysroot" use
add_setshow_optional_filename_cmd so it can be restored to
empty after being set.
This commits cleans up the gdb/breakpoint.c file and moves everything
that is related to the 'catch syscall' command to the new file
gdb/break-catch-syscall.c. This is just code movement, and the only
new part is the adjustment needed on 'catching_syscall_number' to use
the new 'breakpoint_find_if' function insted of relying on the
ALL_BREAKPOINTS macro.
Tested by running the 'gdb.base/catch-syscall.exp' testcase.
gdb/ChangeLog:
2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
* Makefile.in (SFILES): New source break-catch-syscall.c.
(COMMON_OBS): New object break-catch-syscall.o.
* break-catch-syscall.c: New file.
* breakpoint.c: Remove inclusion of "xml-syscall.h".
(syscall_catchpoint_p): Move declaration to break-catch-syscall.c
(struct syscall_catchpoint): Likewise.
(dtor_catch_syscall): Likewise.
(catch_syscall_inferior_data): Likewise.
(struct catch_syscall_inferior_data): Likewise.
(get_catch_syscall_inferior_data): Likewise.
(catch_syscall_inferior_data_cleanup): Likewise.
(insert_catch_syscall): Likewise.
(remove_catch_syscall): Likewise.
(breakpoint_hit_catch_syscall): Likewise.
(print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_breakpoint_ops): Likewise.
(syscall_catchpoint_p): Likewise.
(create_syscall_event_catchpoint): Likewise.
(catch_syscall_split_args): Likewise.
(catch_syscall_command_1): Likewise.
(is_syscall_catchpoint_enabled): Likewise.
(catch_syscall_enabled): Likewise.
(catching_syscall_number): Likewise.
(catch_syscall_completer): Likewise.
(clear_syscall_counts): Likewise.
(initialize_breakpoint_ops): Move initialization of syscall
catchpoints to break-catch-syscall.c.
(_initialize_breakpoint): Move code related to syscall catchpoints
to break-catch-syscall.c.
This commit implements the 'breakpoint_find_if' function, which allows
code external to gdb/breakpoint.c to iterate through the list of
'struct breakpoint *'. This is needed in order to create the
'gdb/break-catch-syscall.c' file, because one of its functions
(catching_syscall_number) needs to do this iteration.
My first thought was to share the ALL_BREAKPOINTS* macros on
gdb/breakpoint.h, but they use a global variable local to
gdb/breakpoint.c, and I did not want to share that variable. So, in
order to keep the minimal separation, I decided to implement this
way of iterating through the existing 'struct breakpoint *'.
This function was based on BFD's bfd_sections_find_if. If the
user-provided function returns 0, the iteration proceeds. Otherwise,
the iteration stops and the function returns the 'struct breakpoint *'
that is being processed. This means that the return value of this
function can be either NULL or a pointer to a 'struct breakpoint'.
gdb/ChangeLog:
2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
* breakpoint.c (breakpoint_find_if): New function.
* breakpoint.h (breakpoint_find_if): New prototype.
This commit adds a new packet "vFile:fstat:" to the remote protocol
that can be used by to retrieve information about files that have
been previously opened using vFile:open. vFile:fstat: support is
added to GDB, and remote_bfd_iovec_stat is implemented using it. If
vFile:fstat: is not supported by the remote GDB creates a dummy result
by zeroing the supplied stat structure and setting its st_size field
to INT_MAX. This mimics GDB's previous behaviour, with the exception
that GDB did not previously zero the structure so all other fields
would have been returned unchanged, which is to say very likely
populated with random values from the stack.
gdb/ChangeLog:
* remote-fileio.h (remote_fileio_to_host_stat): New declaration.
* remote-fileio.c (remote_fileio_to_host_uint): New function.
(remote_fileio_to_host_ulong): Likewise.
(remote_fileio_to_host_mode): Likewise.
(remote_fileio_to_host_time): Likewise.
(remote_fileio_to_host_stat): Likewise.
* remote.c (PACKET_vFile_fstat): New enum value.
(remote_protocol_features): Register the "vFile:fstat" feature.
(remote_hostio_fstat): New function.
(remote_bfd_iovec_stat): Use the above.
(_initialize_remote): Register new "set/show remote
hostio-fstat-packet" command.
* symfile.c (separate_debug_file_exists): Update comment.
* NEWS: Announce new vFile:fstat packet.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Document the
"set/show remote hostio-fstat-packet" command.
(General Query Packets): Document the vFile:fstat
qSupported features.
(Host I/O Packets): Document the vFile:fstat packet.
Re-registering a command will delete previous commands of the same name,
running the destroyer for the command object. The Guile destroyer
incorrectly tried to xfree the name and other strings, which is invalid
as they are on the GC heap.
gdb/ChangeLog:
* guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
other strings, as these are on the GC'd heap, and will be
collected along with the smob.
gdb/ChangeLog:
* guile/guile.c (_initialize_guile): Disable automatic
finalization, if Guile offers us that possibility.
* guile/guile.c (call_initialize_gdb_module):
* guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
finalizers in appropriate places.
* config.in (HAVE_GUILE_MANUAL_FINALIZATION): New definition.
* configure.ac (AC_TRY_LIBGUILE): Add a check for
scm_set_automatic_finalization_enabled.
* configure: Regenerated.
Instead of analyzing the prologue and possibly coming to a wrong
conclusion, this change tries to skip the prologue with the use of
skip_prologue_using_sal. Only if that fails, the prologue analyzer is
invoked as before.
gdb/ChangeLog:
* s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
SAL, if possible.
For multi-threaded inferiors on S390 GNU/Linux targets, GDB tried to
update the PER info via ptrace() in a newly attached thread before
assuring that the thread is stopped. Depending on the timing, this
could lead to a GDB internal error. The patch defers the PER info
update until just before resuming the thread.
gdb/ChangeLog:
* s390-linux-nat.c (struct arch_lwp_info): New.
(s390_fix_watch_points): Rename to...
(s390_prepare_to_resume): ...this. Skip the PER info update
unless the watch points have changed.
(s390_refresh_per_info, s390_new_thread): New functions.
(s390_insert_watchpoint): Call s390_refresh_per_info instead of
s390_fix_watch_points.
(s390_remove_watchpoint): Likewise.
(_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
Register s390_prepare_to_resume.
This reverts 366c75fc.
We don't actually need to access the object through
"struct sockaddr *", so we don't need the union:
https://sourceware.org/ml/gdb-patches/2015-03/msg00213.html
gdb/ChangeLog:
2015-03-09 Pedro Alves <palves@redhat.com>
Revert:
2015-03-07 Pedro Alves <palves@redhat.com>
* common/gdb_socket.h: New file.
* ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
sys/socket.h.
(net_open): Use union gdb_sockaddr_u.
gdb/gdbserver/ChangeLog:
2015-03-09 Pedro Alves <palves@redhat.com>
Revert:
2015-03-07 Pedro Alves <palves@redhat.com>
* gdbreplay.c: No longer include <netinet/in.h>, <sys/socket.h>,
or <winsock2.h> here. Instead include "gdb_socket.h".
(remote_open): Use union gdb_sockaddr_u.
* remote-utils.c: No longer include <netinet/in.h>, <sys/socket.h>
or <winsock2.h> here. Instead include "gdb_socket.h".
(handle_accept_event, remote_prepare): Use union gdb_sockaddr_u.
* tracepoint.c: Include "gdb_socket.h" instead of <sys/socket.h>
or <sys/un.h>.
(init_named_socket, gdb_agent_helper_thread): Use union
gdb_sockaddr_u.
Whoops, these are C specific, but I somehow missed the warnings before:
cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wdeclaration-after-statement’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wmissing-parameter-type’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wold-style-declaration’ is valid for C/ObjC but not for C++ [enabled by default]
cc1plus: warning: command line option ‘-Wold-style-definition’ is valid for C/ObjC but not for C++ [enabled by default]
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* configure.ac (build_warnings): Move -Wmissing-prototypes
-Wdeclaration-after-statement -Wmissing-parameter-type
-Wold-style-declaration -Wold-style-definition to the C-specific
set.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* configure.ac (build_warnings): Move
-Wdeclaration-after-statement to the C-specific set.
* configure: Regenerate.
Building gdbserver in C++ mode shows:
gdb/gdbserver/tracepoint.c: In function ‘void* gdb_agent_helper_thread(void*)’:
gdb/gdbserver/tracepoint.c:7190:47: error: cannot convert ‘sockaddr_un*’ to ‘sockaddr*’ for argument ‘2’ to ‘int accept(int, sockaddr*, socklen_t*)’
fd = accept (listen_fd, &sockaddr, &tmp);
A few places in the tree already have an explicit cast to struct
sockaddr *, but that's a strict aliasing violation. Instead of
propagating invalid code, fix this by using a union instead.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* common/gdb_socket.h: New file.
* ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
sys/socket.h.
(net_open): Use union gdb_sockaddr_u.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* gdbreplay.c: No longer include <netinet/in.h>, <sys/socket.h>,
or <winsock2.h> here. Instead include "gdb_socket.h".
(remote_open): Use union gdb_sockaddr_u.
* remote-utils.c: No longer include <netinet/in.h>, <sys/socket.h>
or <winsock2.h> here. Instead include "gdb_socket.h".
(handle_accept_event, remote_prepare): Use union gdb_sockaddr_u.
* tracepoint.c: Include "gdb_socket.h" instead of <sys/socket.h>
or <sys/un.h>.
(init_named_socket, gdb_agent_helper_thread): Use union
gdb_sockaddr_u.
Although the current TRY/CATCH implementation works in C++ mode too,
it relies on setjmp/longjmp, and longjmp bypasses calling the
destructors of objects on the stack, which is obviously bad for C++.
This patch fixes this by makes TRY/CATCH use real try/catch in C++
mode behind the scenes. The way this is done allows RAII and cleanups
to coexist while we phase out cleanups, instead of requiring a flag
day.
This patch is not strictly necessary until we require a C++ compiler
and start actually using RAII, though I'm all for baby steps, and it
shows my proposed way forward. Putting it in now, allows for easier
experimentation and exposure of potential problems with real C++
exceptions.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c [!__cplusplus] (enum catcher_state)
(exceptions_state_mc_action_iter)
(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
Don't define.
[__cplusplus] (try_scope_depth): New global.
[__cplusplus] (exception_try_scope_entry)
(exception_try_scope_exit, gdb_exception_sliced_copy)
(exception_rethrow): New functions.
(throw_exception): In C++ mode, throw
gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
(throw_it): In C++ mode, use try_scope_depth.
* common/common-exceptions.h [!__cplusplus]
(exceptions_state_mc_action_iter)
(exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
Don't declare.
[__cplusplus] (exception_try_scope_entry)
(exception_try_scope_exit, exception_rethrow): Declare.
[__cplusplus] (struct exception_try_scope): New struct.
[__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
C++ exceptions.
(struct gdb_exception_RETURN_MASK_ALL)
(struct gdb_exception_RETURN_MASK_ERROR)
(struct gdb_exception_RETURN_MASK_QUIT): New types.
After the previous patch, this is the last remaining use of a volatile
struct gdb_exception. Kill it, as it's troublesome for C++: we can't
assign volatile <-> non-volatile without copy constructors /
assignment operators that do that, which I'd rather avoid.
gdb/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
* main.c (handle_command_errors): Remove volatile qualifier from
parameter.
