indicates that addresses should be sign-extended and there are
only 8 hex digits in the address, then do so.
* Makefile.in (utils.o): Depend on $(gdbcore_h).
"thread" parameter to the watchpoint command and set the
"thread" member of the breakpoint struct.
* doc/gdb.texinfo: Add new parameter's description.
* testsuite/gdb.base/watch_thread_num.c: New testcase source file.
* testsuite/gdb.base/watch_thread_num.exp: New testcase expect file.
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Check for *-*-solaris2.1[[0-9]]* instead of
*-*-solaris2.1[[0-9]].
* configure: Regenerate.
* procfs.c (proc_set_current_signal): If redelivering a signal,
reuse the current siginfo if possible.
testsuite:
* gdb.base/siginfo-addr.exp, gdb.base/siginfo-addr.c: New.
* gdb.h (gdb_breakpoint): Add parameter pending.
* breakpoint.c (gdb_breakpoint): Add parameter pending.
* mi/mi-cmd-break.c (mi_break_insert): Change
comment to refer to manual. Add support for
the -f flag, for pending breakpoint.
from break_command_1. New parameters COND_STRING, THREAD
PARSE_CONDITITION_AND_THREAD and PENDING_BREAK_SUPPORT.
The previous FLAG parameter split into TEMPFLAG and
HARDWAREFLAG.
When PARSE_CONDITION_AND_THREAD is not set, duplicate
the passed condition string.
(struct captured_breakpoint_args): Remove
(do_captured_breakpoint): Remove.
(break_command_1): Relay to break_command_really.
(gdb_breakpoint): Relay to break_command_really.
(dwarf2_add_field): Use it and attr_form_is_section_offset to
recognize DW_AT_data_member_location attributes. Use
dwarf2_get_attr_constant_value when the attribute is a constant.
* dwarf2read.c (attr_form_is_section_offset): New function.
(dwarf_add_member_fn, read_common_block, read_partial_die)
(dwarf2_symbol_mark_computed): Use it, instead of writing it out.
* addrmap.c (struct addrmap): Make the referenced function table
const.
(addrmap_fixed_funcs, addrmap_mutable_funcs): Declare const.
Don't use designated initializers.
* addrmap.c (addrmap_fixed_create_fixed, addrmap_mutable_find)
(addrmap_mutable_relocate): Use internal_error, not abort.
* infrun.c (handle_inferior_event): Remove
calls to remove_breakpoints, except where needed to
communicate change of breakpoint locations to inferior.
(keep_going): If steppping over breakpoint, remove
breakpoints.
* infrun.c (trap_expected): Rename
to stepping_over_breakpoint. Document.
(stepping_past_breakpoint): Remove.
(stepping_past_breakpoint_ptdi): Renamed
to deferred_step_ptid.
(struct execution_control_state): Rename
the another_trap field to stepping_over_breakpoint.
(struct inferior_status): Rename the trap_expected
field to stepping_over_breakpoint.
(clear_proceed_status, proceed)
(init_execution_control_state, context_switch)
(handle_inferior_event, currently_stepping)
(keep_going, save_inferior_status)
(restore_inferior_status, prepare_to_proceed): Adjust.
* gdbthread.h (struct thread_info): Rename the
trap_expected field to stepping_over_breakpoint.
* thread.c (load_infrun_state, save_infrun_state):
Adjust.
non-contiguous address ranges.
* addrmap.c, addrmap.h: New files.
* block.h (struct addrmap): New forward declaration.
(struct blockvector): New member, 'map'.
(BLOCKVECTOR_MAP): New accessor macro.
* block.c: #include "addrmap.h"
(blockvector_for_pc_sect): If the blockvector we've found has
an address map, use it instead of searching the blocks.
* buildsym.c: #include "addrmap.h"
(pending_addrmap_obstack, pending_addrmap_interesting): New static
variables.
(really_free_pendings): If we have a pending addrmap, free it too.
(record_block_range): New function.
(make_blockvector): If we have an interesting pending addrmap,
record it in the new blockvector.
(start_symtab, buildsym_init): Assert that there is no pending
addrmap now; we should have cleaned up any addrmaps we'd built
previously.
(end_symtab): If there is a pending addrmap left over that didn't
get included in the blockvector, free it.
* buildsym.h (struct addrmap): New forward declaration.
(record_block_range): New prototype.
* objfiles.c: #include "addrmap.h".
(objfile_relocate): Relocate the blockvector's address map, if
present.
* dwarf2read.c (dwarf2_record_block_ranges): New function.
(read_func_scope, read_lexical_block_scope): Call it.
* Makefile.in (SFILES): Add addrmap.c.
(addrmap_h): New header dependency variable.
(COMMON_OBS): Add addrmap.o.
(addrmap.o): New rule.l
(block.o, objfiles.o, buildsym.o): Depend on $(addrmap_h).
* block.c (blockvector_for_pc, blockvector_for_pc_sect): Return a
pointer to the block, not its index in the blockvector.
(block_for_pc_sect): Use the returned block, instead of looking it
up ourselves.
* block.h (blockvector_for_pc, blockvector_for_pc_sect): Update
declarations.
* breakpoint.c (resolve_sal_pc): Use returned block, instead of
looking it up ourselves.
* stack.c (print_frame_label_vars): Disable function, which
depends on the block's index.
* buildsym.c (finish_block): Return the block we've built.
* buildsym.h (finish_block): Update prototype.
* defs.h (CORE_ADDR_MAX): New constant.
of FT_INTEGER fundamental type for array range index type.
(decode_base_type): Use builtin types of current_gdbarch
instead of fundamental types.
* dwarf2read.c (struct dwarf2_cu): Remove ftypes member.
(read_file_scope): Do not initialize ftypes member.
(dwarf_base_type, dwarf2_fundamental_types): Remove functions.
(read_array_type): Use builtin_type_int32 instead of FT_INTEGER
fundamental type for array range index type.
(read_tag_string_type): Likewise for string range index type.
Also, do not overwrite FT_CHAR type with new string type.
(read_base_type): If DW_AT_name is missing, create unnamed type
with given properties instead of looking for a fundamental type.
Create new types as TYPE_TARGET_TYPE for DW_ATE_address and
DW_ATE_complex_float types.
(read_subrange_type): Create new type to represent missing
DW_AT_type instead of looking for a fundamental type.
(die_type): Use builtin type to represent "void" instead of
looking for a fundamental type.
* stabsread.c (define_symbol): Use builtin types to represent
'r' and 'i' floating-point and integer constants.
* gdbtypes.c (lookup_fundamental_type): Remove.
* gdbtypes.h (lookup_fundamental_type): Remove prototype.
(FT_VOID, FT_BOOLEAN, FT_CHAR, FT_SIGNED_CHAR, FT_UNSIGNED_CHAR,
FT_SHORT, FT_SIGNED_SHORT, FT_UNSIGNED_SHORT, FT_INTEGER,
FT_SIGNED_INTEGER, FT_UNSIGNED_INTEGER, FT_LONG, FT_SIGNED_LONG,
FT_UNSIGNED_LONG, FT_LONG_LONG, FT_SIGNED_LONG_LONG,
FT_UNSIGNED_LONG_LONG, FT_FLOAT, FT_DBL_PREC_FLOAT, FT_EXT_PREC_FLOAT,
FT_COMPLEX, FT_DBL_PREC_COMPLEX, FT_EXT_PREC_COMPLEX, FT_STRING,
FT_FIXED_DECIMAL, FT_FLOAT_DECIMAL, FT_BYTE, FT_UNSIGNED_BYTE,
FT_TEMPLATE_ARG, FT_DECFLOAT, FT_DBL_PREC_DECFLOAT,
FT_EXT_PREC_DECFLOAT, FT_NUM_MEMBERS): Remove macros.
* objfiles.c (struct objfile): Remove fundamental_types member.
* symfile.c (reread_symbols): Do not clear fundamental_types.
* language.h (struct language_defn): Remove la_fund_type member.
(create_fundamental_type): Remove.
* language.c (unk_lang_create_fundamental_type): Remove.
(unknown_language_defn, auto_language_defn,
local_language_defn): Adapt initializer.
* ada-lang.c (ada_create_fundamental_type): Remove.
(ada_language_defn): Adapt initializer.
* c-lang.h (c_create_fundamental_type): Remove prototype.
* c-lang.c (c_create_fundamental_type): Remove.
(c_language_defn, cplus_language_defn, asm_language_defn,
minimal_language_defn): Adapt initializer.
* f-lang.c (f_create_fundamental_type): Remove.
(f_language_defn): Adapt initializer.
* jv-lang.c (java_create_fundamental_type): Remove.
(java_language_defn): Adapt initializer.
* m2-lang.c (m2_create_fundamental_type): Remove.
(m2_language_defn): Adapt initializer.
* objc-lang.c (objc_create_fundamental_type): Remove.
(objc_language_defn): Adapt initializer.
* p-lang.h (pascal_create_fundamental_type): Remove prototype.
* p-lang.c (pascal_create_fundamental_type): Remove.
(pascal_language_defn): Adapt initializer.
* scm-lang.c (scm_language_defn): Adapt initializer.
(win32_init_thread_list): Remove call to CloseHandle for thread.
(win32_delete_thread): Ditto.
(fake_create_process): Set open_process_used if OpenProcess call is successful.
(get_win32_debug_event): Do not close process handle.
(do_initial_win32_stuff): Set open_process_used to zero.
(win32_mourn_inferior): Call CloseHandle for current_process_handle if
open_process_used is set.
(win32_kill_inferior): Do not close process and main_thread handles.
* breakpoint.h (insert_breakpoints): Change
return type to void.
* breakpoint.c (insert_breakpoints): Change
return type to void. Rename local return_val
variable to error.
* infrun.c (keep_going): Instead of checking
return value from insert_breakpoints, catch exception.
The checks of breakpoints_inserted before calling
remove_breakpoints are removed, as remove_breakpoint
won't touch uninserted breakpoints. In a number of places,
we're interested if a breakpoint is inserted at particular
PC, and we now use breakpoint_inserted_here_p. In a few
places, insert_breakpoints can be called unconditionally,
since it won't try to insert already inserted breakpoint.
* breakpoint.h (regular_breakpoint_inserted_here_p): New
declaration.
* breakpoint.c (regular_breakpoint_inserted_here_p): New.
(breakpoint_inserted_here_p): Use
regular_breakpoint_inserted_here_p.
* infrun.c (breakpoints_inserted): Remove.
(resume): Don't check for breakpoints_inserted before
remove_hw_watchpoints. Use breakpoint_inserted_here_p.
(proceed, init_wait_for_inferior): Don't set breakpoints_inserted.
(handle_inferior_event): Don't use breakpoints_inserted.
Use breakpoints_meant_to_be_inserted and
breakpoints_inserted_here_p.
(insert_step_resume_breakpoint_at_sal, keep_going): Use
breakpoints_meant_to_be_inserted. Don't set breakpoints_inserted.
(normal_stop): Don't check for breakpoints_inserted. Don't
set breakpoints_inserted.
(keep_going): Don't check for breakpoints_inserted.
(insert_step_resume_breakpoint_at_sal): Don't insert
breakpoints
64-bit CORE_ADDR and BFD support, move them to ...
(ALL_64_TARGET_OBS): ... this new variable.
* configure.ac: Check for --enable-64-bit-bfd option. Only add
64-bit targets with --enable-targets=all if BFD supports 64-bit.
* configure: Regenerate.
* i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Do not claim
all elf32-i386 executables, only cygwin core files.
* dwarf2read.c (dwarf2_get_pc_bounds): Moved the `DW_AT_ranges' parsing
code with its variables OBJFILE, CU_HEADER and OBFD into ...
(dwarf2_ranges_read): ... a new function.
(read_partial_die): Implemented the parsing of `DW_AT_ranges'.
gdb/testsuite/
* gdb.dwarf2/dw2-ranges.S, gdb.dwarf2/dw2-ranges.exp: New files.
(thread_info_struct): Rename suspend_count to suspended, to be
used as a flag.
(thread_rec): Only suspend the thread if it wasn't suspended by
gdb before. Warn if suspending failed.
(win32_add_thread): Set Dr6 to DR6_CLEAR_VALUE.
(win32_continue): Set Dr6 to DR6_CLEAR_VALUE. Update usage of the
`suspended' flag. Do ContinueDebugEvent after resuming the
suspended threads, not before. Set threads' contexts before
resuming them, not after.
(win32_resume): Set Dr6 to DR6_CLEAR_VALUE.
