Program received signal SIGABRT, Aborted.
[...]
(gdb) gcore foobar
Couldn't get registers: No such process.
(gdb) info threads
[...]
(gdb) gcore foobar
Saved corefile foobar
(gdb)
gcore tries to access the exited thread:
[Thread 0x7ffff7fce700 (LWP 6895) exited]
ptrace(PTRACE_GETREGS, 6895, 0, 0x7fff18167dd0) = -1 ESRCH (No such process)
Without the TRY_CATCH protection testsuite FAILs for:
gcore .../gdb/testsuite/gdb.threads/gcore-thread0.test
Cannot find new threads: debugger service failed
(gdb) FAIL: gdb.threads/gcore-thread.exp: save a zeroed-threads corefile
+
core .../gdb/testsuite/gdb.threads/gcore-thread0.test
".../gdb/testsuite/gdb.threads/gcore-thread0.test" is not a core dump: File format not recognized
(gdb) FAIL: gdb.threads/gcore-thread.exp: core0file: re-load generated corefile (bad file format)
Maybe the TRY_CATCH could be more inside update_thread_list().
Similar update_thread_list() call is IMO missing in procfs_make_note_section()
but I do not have where to verify that change.
gdb/ChangeLog
2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-tdep.c (linux_corefile_thread_callback): Ignore THREAD_EXITED.
(linux_make_corefile_notes): call update_thread_list, protected against
exceptions.
gdb/testsuite/ChangeLog
2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/gcore-stale-thread.c: New file.
* gdb.threads/gcore-stale-thread.exp: New file.
Checking whether the gcore command is included in the GDB build as
proxy for checking whether core dumping is supported by the target is
useless, as gcore.o has been in COMMON_OBS since git 9b4eba8e:
2009-10-26 Michael Snyder <msnyder@vmware.com>
Hui Zhu <teawater@gmail.com>
* Makefile.in (SFILES): Add gcore.c.
(COMMON_OBS): Add gcore.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Delete gcore.o.
* config/alpha/fbsd.mh (NATDEPFILES): Ditto.
...
IOW, the command is always included in the build.
Instead, nowadays, tests bail out if actually trying to generate a
core fails with an indication the target doesn't support it. See
gdb_gcore_cmd and callers.
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
* gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
* gdb.base/gcore-relro-pie.exp: Likewise.
* gdb.base/gcore-relro.exp: Likewise.
* gdb.base/gcore.exp: Likewise.
* gdb.base/print-symbol-loading.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
This integrates Jan Kratochvil's nice race reproducer from PR
testsuite/12649 into the testsuite infrustructure directly.
With this, one only has to do either 'make check-read1' or 'make check
READ1="1"' to preload the read1.so library into expect.
Currently only enabled for glibc/GNU systems, and if
build==host==target.
gdb/testsuite/ChangeLog:
* Makefile.in (EXTRA_RULES, CC): New variables, get from
configure.
(EXPECT): Handle READ1 being set.
(all): Depend on EXTRA_RULES.
(check-read1, expect-read1, read1.so, read1): New rules.
* README (Testsuite Parameters): Document the READ1 make variable.
(Race detection): New section.
* configure: Regenerate.
* configure.ac: If build==host==target, and running under a
GNU/glibc system, add read1 to the extra Makefile rules.
(EXTRA_RULES): AC_SUBST it.
* lib/read1.c: New file.
gdb/ChangeLog:
* Makefile.in (check-read1): New rule.
Consider an array described in the debugging information as being
a typedef of an array type for which there is a DW_AT_data_location
attribute. Trying to print the value of that array currently yields
incorrect element values. For instance:
(gdb) print foo.three_tdef
$1 = (6293760, 0, 6293772)
The problem occurs because we check for the data_location attribute
only on the typedef type, whereas we should be checking for the
typedef's target type. As a result, GDB erroneously thinks that
there is no data_location, and therefore starts reading the array's
content from the address of the descriptor instead of the data_location
address.
gdb/ChangeLog:
* value.c (value_from_contents_and_address): Strip resolved_type's
typedef layers before checking its TYPE_DATA_LOCATION.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.exp: Add additional tests exercising
the handling of variables declared as a typedef to an array
which a DW_AT_data_location attribute.
This fixes PR symtab/14604, PR symtab/14605, and Jan's test at
https://sourceware.org/ml/gdb-patches/2014-07/msg00158.html, in a tree
with bddbbed reverted:
2014-07-22 Pedro Alves <palves@redhat.com>
* value.c (allocate_optimized_out_value): Don't mark value as
non-lazy.
The PRs are about variables described by the DWARF as being split over
multiple registers using DWARF piece information, but some of those
registers being marked as optimised out (not saved) by a later frame.
GDB currently incorrectly mishandles these partially-optimized-out
values.
Even though we can usually tell from the debug info whether a local or
global is optimized out, handling the case of a local living in a
register that was not saved in a frame requires fetching the variable.
GDB also needs to fetch a value to tell whether parts of it are
"<unavailable>". Given this, it's not worth it to try to avoid
fetching lazy optimized-out values based on debug info alone.
So this patch makes GDB track which chunks of a value's contents are
optimized out like it tracks <unavailable> contents. That is, it
makes value->optimized_out be a bit range vector instead of a boolean,
and removes the struct lval_funcs check_validity and check_any_valid
hooks.
Unlike Andrew's series which this is based on (at
https://sourceware.org/ml/gdb-patches/2013-08/msg00300.html, note some
pieces have gone in since), this doesn't merge optimized out and
unavailable contents validity/availability behind a single interface,
nor does it merge the bit range vectors themselves (at least yet).
While it may be desirable to have a single entry point that returns
existence of contents irrespective of what may make them
invalid/unavailable, several places want to treat optimized out /
unavailable / etc. differently, so each spot that potentially could
use it will need to be careful considered on case-by-case basis, and
best done as a separate change.
This fixes Jan's test, because value_available_contents_eq wasn't
considering optimized out value contents. It does now, and because of
that it's been renamed to value_contents_eq.
A new intro comment is added to value.h describing "<optimized out>",
"<not saved>" and "<unavailable>" values.
gdb/
PR symtab/14604
PR symtab/14605
* ada-lang.c (coerce_unspec_val_to_type): Use
value_contents_copy_raw.
* ada-valprint.c (val_print_packed_array_elements): Adjust.
* c-valprint.c (c_val_print): Use value_bits_any_optimized_out.
* cp-valprint.c (cp_print_value_fields): Let the common printing
code handle optimized out values.
(cp_print_value_fields_rtti): Use value_bits_any_optimized_out.
* d-valprint.c (dynamic_array_type): Use
value_bits_any_optimized_out.
* dwarf2loc.c (entry_data_value_funcs): Remove check_validity and
check_any_valid fields.
(check_pieced_value_bits): Delete and inline ...
(check_pieced_synthetic_pointer): ... here.
(check_pieced_value_validity): Delete.
(check_pieced_value_invalid): Delete.
(pieced_value_funcs): Remove check_validity and check_any_valid
fields.
(read_pieced_value): Use mark_value_bits_optimized_out.
(write_pieced_value): Switch to use
mark_value_bytes_optimized_out.
(dwarf2_evaluate_loc_desc_full): Copy the value contents instead
of assuming the whole value is optimized out.
* findvar.c (read_frame_register_value): Remove special handling
of optimized out registers.
(value_from_register): Use mark_value_bytes_optimized_out.
* frame-unwind.c (frame_unwind_got_optimized): Use
mark_value_bytes_optimized_out.
* jv-valprint.c (java_value_print): Adjust.
(java_print_value_fields): Let the common printing code handle
optimized out values.
* mips-tdep.c (mips_print_register): Remove special handling of
optimized out registers.
* opencl-lang.c (lval_func_check_validity): Delete.
(lval_func_check_any_valid): Delete.
(opencl_value_funcs): Remove check_validity and check_any_valid
fields.
* p-valprint.c (pascal_object_print_value_fields): Let the common
printing code handle optimized out values.
* stack.c (read_frame_arg): Remove special handling of optimized
out values. Fetch both VAL and ENTRYVAL before comparing
contents. Adjust to value_available_contents_eq rename.
* valprint.c (valprint_check_validity)
(val_print_scalar_formatted): Use value_bits_any_optimized_out.
(val_print_array_elements): Adjust.
* value.c (struct value) <optimized_out>: Now a VEC(range_s).
(value_bits_any_optimized_out): New function.
(value_entirely_covered_by_range_vector): New function, factored
out from value_entirely_unavailable.
(value_entirely_unavailable): Reimplement.
(value_entirely_optimized_out): New function.
(insert_into_bit_range_vector): New function, factored out from
mark_value_bits_unavailable.
(mark_value_bits_unavailable): Reimplement.
(struct ranges_and_idx): New struct.
(find_first_range_overlap_and_match): New function, factored out
from value_available_contents_bits_eq.
(value_available_contents_bits_eq): Rename to ...
(value_contents_bits_eq): ... this. Check both unavailable
contents and optimized out contents.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this.
(allocate_value_lazy): Remove reference to the old optimized_out
boolean.
(allocate_optimized_out_value): Use
mark_value_bytes_optimized_out.
(require_not_optimized_out): Adjust to check whether the
optimized_out vec is empty.
(ranges_copy_adjusted): New function, factored out from
value_contents_copy_raw.
(value_contents_copy_raw): Also copy the optimized out ranges.
Assert the destination ranges aren't optimized out.
(value_contents_copy): Update comment, remove call to
require_not_optimized_out.
(value_contents_equal): Adjust to check whether the optimized_out
vec is empty.
(set_value_optimized_out, value_optimized_out_const): Delete.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New functions.
(value_entirely_optimized_out, value_bits_valid): Delete.
(value_copy): Take a VEC copy of the 'optimized_out' field.
(value_primitive_field): Remove special handling of optimized out.
(value_fetch_lazy): Assert that lazy values have no unavailable
regions. Use value_bits_any_optimized_out. Remove some special
handling for optimized out values.
* value.h: Add intro comment about <optimized out> and
<unavailable>.
(struct lval_funcs): Remove check_validity and check_any_valid
fields.
(set_value_optimized_out, value_optimized_out_const): Remove.
(mark_value_bytes_optimized_out, mark_value_bits_optimized_out):
New declarations.
(value_bits_any_optimized_out): New declaration.
(value_bits_valid): Delete declaration.
(value_available_contents_eq): Rename to ...
(value_contents_eq): ... this, and extend comments.
gdb/testsuite/
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
This comment is no longer true for watchpoints since commit 31e77af2
(PR breakpoints/7143 - Watchpoint does not trigger when first set).
gdb/testsuite/
* gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
In gdb.base/watchpoint-hw-hit-once.exp, test scans source and set
breakpoint on the line having "break-at-exit",
gdb_breakpoint [gdb_get_line_number "break-at-exit"]
However, in watchpoint-hw-hit-once.c, there are two lines having
this key word:
dummy = 1; /* Stub to catch break-at-exit after WATCHEE has been hit. */
dummy = 2; /* break-at-exit */
so the test sets breakpoint on the first one, while I think it is
expected to set breakpoint on the second one, as far as I can tell
from the comments in watchpoint-hw-hit-once.c:
/* Stub lines are present as no breakpoints/watchpoint gets hit if current PC
already stays on the line PC while entering "step"/"continue". */
This patch is to change the source matching pattern so that test
can correctly set breakpoint on the right line. This patch fixes
a fail we found on arm-none-eabi target.
(gdb) PASS: gdb.base/watchpoint-hw-hit-once.exp: continue
continue^M
Continuing.^M
^M
*** EXIT code 0^M
[Inferior 1 (Remote target) exited normally]^M
(gdb) FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
Run it again on x86_64-linux, no result changes.
gdb/testsuite:
2014-08-19 Yao Qi <yao@codesourcery.com>
* gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
right line.
The testcase generates an assembly file where a second DW_AT_upper_bound
attribute gets generated in the array range. This was definitely
unintentional, and I only noticed this after pushing the testcase,
when dumping one more time the DWARF data using readelf.
This patch fixes it.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
attribute in array range.
This testcase allows us to test the proper processing of both
DW_AT_data_location and DW_OP_push_object_address using a hand-crafted
testcase duplicating how we expect the Ada compiler to represent
unbounded arrays.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
This is a fix for PR c++/17132.
If this new argument is set to EVAL_AVOID_SIDE_EFFECTS, then the object's
memory will not be read while picking the best overload match.
gdb/
* eval.c: Update all calls to find_overload_match.
* valarith.c: Likewise.
(value_user_defined_cpp_op, value_user_defined_op): New
argument NOSIDE. Update all callers.
* valops.c (find_overload_match): New argument NOSIDE.
* value.h (find_overload_match): Update signature.
gdb/testsuite
* gdb.cp/pr17132.cc: New file.
* gdb.cp/pr17132.exp: New file.
gdb/
* python/lib/gdb/command/xmethods.py (set_xm_status1): Use the
'items' methods instead of 'iteritems' method on dictionaries.
gdb/testsuite/
* gdb.python/py-xmethods.py (A_getarrayind)
(E_method_char_worker.__call__, E_method_int_worker.__call__):
Use 'print' with function call syntax.
(E_method_matcher.match): Fix tab vs space indentation mixup.
I added proc generate_tracefile in this patch
https://sourceware.org/ml/gdb-patches/2014-03/msg00591.html but
tfile.exp isn't skipped as changelog entry said:
* gdb.trace/tfile.exp: Skip the test if generate_tracefile
return 0.
it is a mistake I made at the last minute. Patch below fixed it.
gdb/testsuite:
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
false.
GDB in default prints the symbol associated on an address, and tests
assume that there is no symbol on address zero. However, on bare
metal target, address may be mapped to zero and there may be a
symbol. Then, some tests fail as below:
print const_cast<void *> (0)^M
$8 = (void *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.cp/casts.exp: const_cast of 0
p acp->c1^M
$9 = (A *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.cp/class2.exp: p acp->c1
This patch is to set print symbol off in these tests, like what
I did previously https://sourceware.org/ml/gdb-patches/2014-07/msg00257.html
gdb/testsuite:
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.cp/casts.exp: Set print symbol off.
* gdb.cp/class2.exp: Likewise.
* gdb.cp/overload.exp: Likewise.
* gdb.cp/templates.exp: Likewise.
* solib.c (solib_read_symbols): Delete "Loaded symbols for ..."
message, it is redundant with "Reading symbols from ..." message.
testsuite/
* gdb.base/print-symbol-loading.exp (test_load_core): Update.
(test_load_shlib): Update.
I find some gdb.python tests fail on arm-none-eabi target, because the
tests assume that memory on address 0x is inaccessible. Some tests
(in gdb.base) are aware of this, so do a "x 0" check first. However,
the code is copy-n-paste.
This patch is to move the "x 0" check to a procedure in lib/gdb.exp,
and get needed tests call it. The original code matches pattern
"0x0:\[ \t\]*Error accessing memory address 0x0\r\n$gdb_prompt $", but
I remove it from the new proc is_address_zero_readable, because GDB
doesn't emit such message any more.
gdb/testsuite:
2014-08-09 Yao Qi <yao@codesourcery.com>
* gdb.base/display.exp: Invoke is_address_zero_readable.
* gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* gdb.base/hbreak-unmapped.exp: Return if
is_address_zero_readable returns true.
* gdb.base/signest.exp: Likewise.
* gdb.base/signull.exp: Likewise.
* gdb.base/sigbpt.exp: Likewise.
* gdb.guile/scm-disasm.exp: Do the test if
is_address_zero_readable returns false.
* gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
* gdb.python/py-arch.exp: Likewise.
* gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
* lib/gdb.exp (is_address_zero_readable): New proc.
When I fix a bug in gdb.mi/mi-var-display.exp, I find its test
messages aren't unique, which makes some confusions for me.
$ cat testsuite/gdb.sum | grep "PASS" | sort | uniq -c | sort -n
...
2 PASS: gdb.mi/mi-var-display.exp: set format variable bar
2 PASS: gdb.mi/mi-var-display.exp: set format variable foo
2 PASS: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr
2 PASS: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr
2 PASS: gdb.mi/mi-var-display.exp: show format variable foo
3 PASS: gdb.mi/mi-var-display.exp: eval variable foo
This patch is to make test messages in mi-var-display.exp unique.
gdb/testsuite:
2014-08-09 Yao Qi <yao@codesourcery.com>
PR testsuite/13443
* gdb.mi/mi-var-display.exp: Make test messages unique.
Right now, "set debug target" acts a bit strangely.
Most target APIs only notice that it has changed when the target stack
is changed in some way. This is because many methods implement the
setting using the special debug target. However, a few spots do
change their behavior immediately -- any place explicitly checking
"targetdebug".
Some of this peculiar behavior is documented. However, I think that
it just isn't very useful for it to work this way. So, this patch
changes "set debug target" to take effect immediately in all cases.
This is done by simply calling update_current_target when the setting
is changed.
This required one small change in the test suite. Here a test was
expecting the current behavior.
Built and regtested on x86-64 Fedora 20.
2014-08-04 Tom Tromey <tromey@redhat.com>
* target.c (set_targetdebug): New function.
(initialize_targets): Pass set_targetdebug when creating "set
debug target".
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Debugging Output): Update for change to "set debug
target".
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
target 0".
This fixes a test suite regession that Yao noticed.
This test checks for some specific "target debug" output
that has changed since the test was written.
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
"target_resume".
In Ada, variable-sized field can be located at any position of
a structure. Consider for instance the following declarations:
Dyn_Size : Integer := 1;
type Table is array (Positive range <>) of Integer;
type Inner is record
T1 : Table (1 .. Dyn_Size) := (others => 1);
T2 : Table (1 .. Dyn_Size) := (others => 2);
end record;
type Inner_Array is array (1 .. 2) of Inner;
type Outer is
record
I0 : Integer := 0;
A1 : Inner_Array;
Marker : Integer := 16#01020304#;
end record;
Rt : Outer;
What this does is declare a variable "Rt" of type Outer, which
contains 3 fields where the second (A1) is of type Inner_Array.
type Inner_Array is an array with 2 elements of type Inner.
Because type Inner contains two arrays whose upper bound depend
on a variable, the size of the array, and therefore the size of
type Inner is dynamic, thus making field A1 a dynamically-size
field.
When trying to print the value of Rt, we hit the following limitation:
(gdb) print rt
Attempt to resolve a variably-sized type which appears in the interior of
a structure type
The limitation was somewhat making sense in C, but needs to be lifted
for Ada. This patch mostly lifts that limitation. As a result of this
patch, the type length computation had to be reworked a little bit.
gdb/ChangeLog:
* gdbtypes.c (resolve_dynamic_struct): Do not generate an error
if detecting a variable-sized field that is not the last field.
Fix struct type length computation.
gdb/testsuite/ChangeLog:
* gdb.base/vla-datatypes.c (vla_factory): Add new variable
inner_vla_struct_object_size.
* gdb.base/vla-datatypes.exp: Adjust last test, and mark it
as xfail.
As reported in PR 17206, an internal error is triggered when command
until is executed. In infcmd.c:until_next_command, step_range_end is
set to 'pc',
if (!func)
{
struct bound_minimal_symbol msymbol = lookup_minimal_symbol_by_pc (pc);
if (msymbol.minsym == NULL)
error (_("Execution is not within a known function."));
tp->control.step_range_start = BMSYMBOL_VALUE_ADDRESS (msymbol);
tp->control.step_range_end = pc;
}
and later in infrun.c:resume, the assert below is triggered in PR
17206.
if (tp->control.may_range_step)
{
/* If we're resuming a thread with the PC out of the step
range, then we're doing some nested/finer run control
operation, like stepping the thread out of the dynamic
linker or the displaced stepping scratch pad. We
shouldn't have allowed a range step then. */
gdb_assert (pc_in_thread_step_range (pc, tp));
}
In until_next_command, we set step range to [XXX, pc), so pc isn't
within the range. pc_in_thread_step_range returns false and the
assert is triggered. AFAICS, the range we want in until_next_command
is [XXX, pc] instead of [XXX, pc), because we want to program step
until greater than pc. This patch is to set step_range_end to
'pc + 1'. Running until-nodebug.exp with unpatched GDB will get the
following fail,
FAIL: gdb.base/until-nodebug.exp: until 2 (GDB internal error)
and the fail goes away when the fix is applied.
gdb:
2014-07-29 Yao Qi <yao@codesourcery.com>
PR gdb/17206
* infcmd.c (until_next_command): Set step_range_end to PC + 1.
gdb/testsuite:
2014-07-29 Yao Qi <yao@codesourcery.com>
PR gdb/17206
* gdb.base/until-nodebug.exp: New.
* guile/scm-param.c (pascm_parameter_defined_p): New function.
(gdbscm_register_parameter_x): Call it. Raise error for pre-existing
parameters.
testsuite/
* gdb.guile/scm-parameter.exp: Add tests for trying to create
previously existing parameter, and previously ambiguously spelled
parameter.
These tests used to fail on ARM but now pass, so remove the KFAIL.
gdb/testsuite/ChangeLog:
2014-07-28 Will Newton <will.newton@linaro.org>
* gdb.base/varargs.exp: Remove KFAILs for ARM.
* data-directory/Makefile.in (GUILE_FILES): Add support.scm.
* guile/lib/gdb/support.scm: New file.
* guile/guile.c (gdbscm_init_module_name): Change to "gdb".
* guile/lib/gdb.scm: Load gdb/init.scm as an include file.
All uses updated.
* guile/lib/gdb/init.scm (SCM_ARG1, SCM_ARG2): Moved to support.scm.
All uses updated.
(%assert-type): Ditto, and renamed to assert-type.
(%exception-print-style): Delete.
testsuite/
* gdb.guile/types-module.exp: Add tests for wrong type arguments.
Currently, GDB can pass a signal to the wrong thread in several
different but related scenarios.
E.g., if thread 1 stops for signal SIGFOO, the user switches to thread
2, and then issues "continue", SIGFOO is actually delivered to thread
2, not thread 1. This obviously messes up programs that use
pthread_kill to send signals to specific threads.
This has been a known issue for a long while. Back in 2008 when I
made stop_signal be per-thread (2020b7ab), I kept the behavior -- see
code in 'proceed' being removed -- wanting to come back to it later.
The time has finally come now.
The patch fixes this -- on resumption, intercepted signals are always
delivered to the thread that had intercepted them.
Another example: if thread 1 stops for a breakpoint, the user switches
to thread 2, and then issues "signal SIGFOO", SIGFOO is actually
delivered to thread 1, not thread 2, because 'proceed' first switches
to thread 1 to step over its breakpoint... If the user deletes the
breakpoint before issuing "signal FOO", then the signal is delivered
to thread 2 (the current thread).
"signal SIGFOO" can be used for two things: inject a signal in the
program while the program/thread had stopped for none, bypassing
"handle nopass"; or changing/suppressing a signal the program had
stopped for. These scenarios are really two faces of the same coin,
and GDB can't really guess what the user is trying to do. GDB might
have intercepted signals in more than one thread even (see the new
signal-command-multiple-signals-pending.exp test). At least in the
inject case, it's obviously clear to me that the user means to deliver
the signal to the currently selected thread, so best is to make the
command's behavior consistent and easy to explain.
Then, if the user is trying to suppress/change a signal the program
had stopped for instead of injecting a new signal, but, the user had
changed threads meanwhile, then she will be surprised that with:
(gdb) continue
Thread 1 stopped for signal SIGFOO.
(gdb) thread 2
(gdb) signal SIGBAR
... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2
(with scheduler-locking off, which is the default, because then
"signal" or any other resumption command resumes all threads).
So the patch makes GDB detect that, and ask for confirmation:
(gdb) thread 1
[Switching to thread 1 (Thread 10979)]
(gdb) signal SIGUSR2
Note:
Thread 3 previously stopped with signal SIGUSR2, User defined signal 2.
Thread 2 previously stopped with signal SIGUSR1, User defined signal 1.
Continuing thread 1 (the current thread) with specified signal will
still deliver the signals noted above to their respective threads.
Continue anyway? (y or n)
All these scenarios are covered by the new tests.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-07-25 Pedro Alves <palves@redhat.com>
* NEWS: Mention signal passing and "signal" command changes.
* gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend
comment.
* breakpoint.c (until_break_command): Adjust clear_proceed_status
call.
* infcall.c (run_inferior_call): Adjust clear_proceed_status call.
* infcmd.c (proceed_thread_callback, continue_1, step_once)
(jump_command): Adjust clear_proceed_status call.
(signal_command): Warn if other thread that are resumed have
signals that will be delivered. Adjust clear_proceed_status call.
(until_next_command, finish_command)
(proceed_after_attach_callback, attach_command_post_wait)
(attach_command): Adjust clear_proceed_status call.
* infrun.c (proceed_after_vfork_done): Likewise.
(proceed_after_attach_callback): Adjust comment.
(clear_proceed_status_thread): Clear stop_signal if not in pass
state.
(clear_proceed_status_callback): Delete.
(clear_proceed_status): New 'step' parameter. Only clear the
proceed status of threads the command being prepared is about to
resume.
(proceed): If passed in an explicit signal, override stop_signal
with it. Don't pass the last stop signal to the thread we're
resuming.
(init_wait_for_inferior): Adjust clear_proceed_status call.
(switch_back_to_stepped_thread): Clear the signal if it should not
be passed.
* infrun.h (clear_proceed_status): New 'step' parameter.
(user_visible_resume_ptid): Add comment.
* linux-nat.c (linux_nat_resume_callback): Don't check whether the
signal is in pass state.
* remote.c (append_pending_thread_resumptions): Likewise.
* mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call.
gdb/doc/
2014-07-25 Pedro Alves <palves@redhat.com>
Eli Zaretskii <eliz@gnu.org>
* gdb.texinfo (Signaling) <signal command>: Explain what happens
with multi-threaded programs.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
Jan pointed out in
<https://sourceware.org/ml/gdb-patches/2014-07/msg00553.html> that
these testcases have racy results:
gdb.base/double-prompt-target-event-error.exp
gdb.base/paginate-after-ctrl-c-running.exp
gdb.base/paginate-bg-execution.exp
gdb.base/paginate-execution-startup.exp
gdb.base/paginate-inferior-exit.exp
This is easily reproducible with "read1" from:
[reproducer for races of expect incomplete reads]
http://sourceware.org/bugzilla/show_bug.cgi?id=12649
The '-notransfer -re "<return>" { exp_continue }' trick in the current
tests doesn't actually work.
The issue that led to the -notransfer trick was that
"---Type <return> to continue, or q <return> to quit---"
has two "<return>"s. If one wants gdb_test_multiple to not hit the
built-in "<return>" match that results in FAIL, one has to expect the
pagination prompt in chunks, first up to the first "<return>", then
again, up to the second. Something around these lines:
gdb_test_multiple "" $test {
-re "<return>" {
exp_continue
}
-re "to quit ---" {
pass $test
}
}
The intent was for -notransfer+exp_continue to make expect fetch more
input, and rerun the matches against the now potentially fuller
buffer, and then eventually the -re that includes the full pagination
prompt regex would match instead (because it's listed higher up, it
would match first). But, once that "<return>" -notransfer -re
matches, it keeps re-matching forever. It seems like with
exp_continue, expect immediately retries matching, instead of first
reading in more data into the buffer, if available.
Fix this like I should have done in the first place. There's actually
no good reason for gdb_test_multiple to only match "<return>". We can
make gdb_test_multiple expect the whole pagination prompt text
instead, which is store in the 'pagination_prompt' global (similar to
'gdb_prompt'). Then a gdb_test_multiple caller that doesn't want the
default match to trigger, because it wants to see one pagination
prompt, does simply:
gdb_test_multiple "" $test {
-re "$pagination_prompt$" {
pass $test
}
}
which is just like when we don't want the default $gdb_prompt match
within gdb_test_multiple to trigger, like:
gdb_test_multiple "" $test {
-re "$gdb_prompt $" {
pass $test
}
}
Tested on x86_64 Fedora 20. In addition, I've let the racy tests run
all in parallel in a loop for 30 minutes, and they never failed.
gdb/testsuite/
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.exp
(cancel_pagination_in_target_event): Remove '-notransfer <return>'
match.
(cancel_pagination_in_target_event): Rework double prompt
detection.
* gdb.base/paginate-after-ctrl-c-running.exp
(test_ctrlc_while_target_running_paginates): Remove '-notransfer
<return>' match.
* gdb.base/paginate-bg-execution.exp
(test_bg_execution_pagination_return)
(test_bg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-execution-startup.exp
(test_fg_execution_pagination_return)
(test_fg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-inferior-exit.exp
(test_paginate_inferior_exited): Remove '-notransfer <return>'
match.
* lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
* lib/gdb.exp (pagination_prompt): Run text through
string_to_regexp.
(gdb_test_multiple): Match $pagination_prompt instead of
"<return>".
(string_to_regexp): Move to lib/gdb-utils.exp.
I noticed that the existing code casts a function's address to 'long',
but that doesn't work correctly on some ABIs, like Win64, where long
is 32-bit and while pointers are 64-bit:
func_addr = (long) &write_basic_trace_file;
Fixing that showed there's actually another place in the file that
writes a function address to file, and therefore should clear the
Thumb bit. This commit adds a macro+function pair to centralize the
Thumb bit handling, and uses it in both places.
The rest is just enough changes to make the file build without
warnings with "-Wall -Wextra" with x86_64-w64-mingw32-gcc and
i686-w64-mingw32-gcc cross compilers, and with -m32/-m64 on x86_64
GNU/Linux. Currently with x86_64-w64-mingw32-gcc we get:
$ x86_64-w64-mingw32-gcc tfile.c -Wall -DTFILE_DIR=\"\"
tfile.c: In function 'start_trace_file':
tfile.c:51:23: error: 'S_IRGRP' undeclared (first use in this function)
S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
^
tfile.c:51:23: note: each undeclared identifier is reported only once for each function it appears in
tfile.c:51:31: error: 'S_IROTH' undeclared (first use in this function)
S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
^
tfile.c: In function 'add_memory_block':
tfile.c:79:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
ll_x = (unsigned long) addr;
^
tfile.c: In function 'write_basic_trace_file':
tfile.c:113:15: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
func_addr = (long) &write_basic_trace_file;
^
tfile.c:137:3: warning: passing argument 1 of 'add_memory_block' from incompatible pointer type [enabled by default]
add_memory_block (&testglob, sizeof (testglob));
^
tfile.c:72:1: note: expected 'char *' but argument is of type 'int *'
add_memory_block (char *addr, int size)
^
tfile.c:139:3: warning: passing argument 1 of 'add_memory_block' from incompatible pointer type [enabled by default]
add_memory_block (&testglob2, 1);
^
tfile.c:72:1: note: expected 'char *' but argument is of type 'int *'
add_memory_block (char *addr, int size)
^
tfile.c: In function 'write_error_trace_file':
tfile.c:185:3: warning: implicit declaration of function 'alloca' [-Wimplicit-function-declaration]
char *hex = alloca (len * 2 + 1);
^
tfile.c:185:15: warning: incompatible implicit declaration of built-in function 'alloca' [enabled by default]
char *hex = alloca (len * 2 + 1);
^
tfile.c:211:6: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
(long) &write_basic_trace_file);
^
Tested on x86_64 Fedora 20, -m64 and -m32.
Tested by Yao on arm targets.
gdb/testsuite/
2014-07-16 Pedro Alves <palves@redhat.com>
* gdb.trace/tfile.c: Include unistd.h and stdint.h.
(start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
(tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
(tfile_write_buf): New functions.
(add_memory_block): Rewrite using the above.
(adjust_function_address): New function.
(FUNCTION_ADDRESS): New macro.
(write_basic_trace_file): Remove short_x local, and use
tfile_write_16. Change type of func_addr local to unsigned long
long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
here. Cast argument of add_memory_block to char pointer.
(write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
(main): Remove parameters.
* gdb.trace/tfile.exp: Remove nowarnings.
As Joel pointed out in...
https://sourceware.org/ml/gdb-patches/2014-07/msg00391.html
...it would be nice to add a test for that.
Tested on Linux x86_64 (Ubuntu 14.10).
gdb/testsuite/ChangeLog
2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/debug-expr.exp: Test string evaluation with
"debug expression" on.
The other day I noticed that default_gdb_start reuses the GDB process
if it has been spawned already:
proc default_gdb_start { } {
...
if [info exists gdb_spawn_id] {
return 0
}
I was a bit surprised, and so I hacked in an error to check whether
anything is relying on it:
+ if [info exists gdb_spawn_id] {
+ error "GDB already spawned"
+ }
And lo, that tripped on a funny buglet (see below). The comment in
reread.exp says "Restart GDB entirely", but in reality, due to the
above, that's not what is happening, as a gdb_exit call is missing.
The test is proceeding with the previous GDB process...
I don't really want to go hunt for whether there's an odd setup out
there that assumes this in its board file or something, so for now,
I'm taking the simple route of just making the test do what it says it
does. I think this much makes it an obvious fix.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(gdb) PASS: gdb.base/reread.exp: run to foo() second time
ERROR: tcl error sourcing ../src/gdb/testsuite/gdb.base/reread.exp.
ERROR: GDB already spawned
while executing
"error "GDB already spawned""
invoked from within
"if [info exists gdb_spawn_id] {
error "GDB already spawned"
}"
(procedure "default_gdb_start" line 22)
invoked from within
"default_gdb_start"
(procedure "gdb_start" line 2)
invoked from within
"gdb_start"
invoked from within
"if [is_remote target] {
unsupported "second pass: GDB should check for changes before running"
} else {
# Put the older executable back in pl..."
(file "../src/gdb/testsuite/gdb.base/reread.exp" line 114)
invoked from within
"source ../src/gdb/testsuite/gdb.base/reread.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source ../src/gdb/testsuite/gdb.base/reread.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
testcase ../src/gdb/testsuite/gdb.base/reread.exp completed in 1 seconds
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gdb/testsuite/
2014-07-15 Pedro Alves <palves@redhat.com>
* gdb.base/reread.exp: Use clean_restart.
The __flash qualifier is part of the named address spaces for AVR [1]. It
allows putting read-only data in the flash memory, normally reserved for
code.
When used together with a pointer, the DW_AT_address_class attribute is set
to 1 and allows GDB to detect that when it will be dereferenced, the data
will be loaded from the flash memory (with the LPM instruction).
We can now properly debug the following code:
~~~
const __flash char data_in_flash = 0xab;
int
main (void)
{
const __flash char *pointer_to_flash = &data_in_flash;
}
~~~
~~~
(gdb) print pointer_to_flash
$1 = 0x1e8 <data_in_flash> "\253"
(gdb) print/x *pointer_to_flash
$2 = 0xab
(gdb) x/x pointer_to_flash
0x1e8 <data_in_flash>: 0xXXXXXXab
~~~
Whereas previously, GDB would revert to the default address space which is
RAM and mapped in higher memory:
~~~
(gdb) print pointer_to_flash
$1 = 0x8001e8 ""
~~~
[1] https://gcc.gnu.org/onlinedocs/gcc/Named-Address-Spaces.html
2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
gdb/
* avr-tdep.c (AVR_TYPE_ADDRESS_CLASS_FLASH): New macro.
(AVR_TYPE_INSTANCE_FLAG_ADDRESS_CLASS_FLASH): Likewise.
(avr_address_to_pointer): Check for AVR_TYPE_ADDRESS_CLASS_FLASH.
(avr_pointer_to_address): Likewise.
(avr_address_class_type_flags): New function.
(avr_address_class_type_flags_to_name): Likewise.
(avr_address_class_name_to_type_flags): Likewise.
(avr_gdbarch_init): Set address_class_type_flags,
address_class_type_flags_to_name and
address_class_name_to_type_flags.
gdb/testsuite/
* gdb.arch/avr-flash-qualifer.c: New.
* gdb.arch/avr-flash-qualifer.exp: New.
Put GDB's terminal settings into effect when paginating
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* utils.c (prompt_for_continue): Call target_terminal_ours.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/paginate-after-ctrl-c-running.c: New file.
* gdb.base/paginate-after-ctrl-c-running.exp: New file.
If an error is thrown while handling a target event (within
fetch_inferior_event), and, the interpreter is not async (but the
target is), then GDB prints the prompt twice.
One way to see that in action is throw a QUIT while in a pagination
prompt issued from within fetch_inferior_event (or one of its
callees). E.g. from the test:
---Type <return> to continue, or q <return> to quit---
^CQuit
(gdb) (gdb) p 1
^^^^^^^^^^^
$1 = 1
(gdb)
The issue is that inferior_event_handler swallows errors and notifies
the observers (the interpreters) about the command error, even if the
interpreter is forced sync while we're handling a nested event loop
(for execute_command). The observers print a prompt, and then when we
get back to the top event loop, we print another (in
start_event_loop).
I see no reason the error should be swallowed here. Just cancel the
execution related bits and let the error propagate to the top level
(start_event_loop), which re-enables stdin and notifies observers.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* inf-loop.c (inferior_event_handler): Use TRY_CATCH instead of
catch_errors. Don't re-enable stdin or notify observers where,
and rethrow error.
(fetch_inferior_event_wrapper): Delete.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.c: New file.
* gdb.base/double-prompt-target-event-error.exp: New file.
If a pagination prompt triggers while the target is running, and the
target exits before the user responded to the pagination query, this
happens:
Starting program: foo
---Type <return> to continue, or q <return> to quit---No unwaited-for children left.
Couldn't get registers: No such process.
Couldn't get registers: No such process.
Couldn't get registers: No such process.
(gdb) Couldn't get registers: No such process.
(gdb)
To reiterate, the user hasn't replied to the pagination prompt above.
A pagination query nests an event loop (in gdb_readline_wrapper). In
async mode, in addition to stdin and signal handlers, we'll have the
target also installed in the event loop still. So if the target
reports an event, that wakes up the nested event loop, which calls
into fetch_inferior_event etc. to handle the event which generates
further output, all while we should be waiting for pagination
confirmation...
(TBC, any target event that generates output ends up spuriously waking
up the pagination, though exits seem to be the worse kind.)
I've played with a couple different approaches to fixing this, while
at the same time trying to avoid being invasive. Both revolve around
not listening to target events while in a pagination prompt (doing
anything else I think would be a much bigger change).
The approach taken just removes the target from the event loop while
within gdb_readline_wrapper. The other approach used gdb_select
directly, with only input_fd installed, but that had the issue that it
didn't handle the async signal handlers, and turned out to be a bit
more code than the first version.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* top.c: Include "inf-loop.h".
(struct gdb_readline_wrapper_cleanup) <target_is_async_orig>: New
field.
(gdb_readline_wrapper_cleanup): Make the target async again, if it
was async before.
(gdb_readline_wrapper): Store whether the target is async, and
make it sync.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-inferior-exit.c: New file.
* gdb.base/paginate-inferior-exit.exp: New file.
If pagination occurs as result of output sent as response to a target
event while the target is executing in the background, subsequent
input aborts readline/gdb:
$ gdb program
...
(gdb) continue&
Continuing.
(gdb)
---Type <return> to continue, or q <return> to quit---
*return*
---Type <return> to continue, or q <return> to quit---
Breakpoint 2, after_sleep () at paginate-bg-execution.c:21
---Type <return> to continue, or q <return> to quit---
21 return; /* after sleep */
p 1
readline: readline_callback_read_char() called with no handler!
*abort/SIGABRT*
$
gdb_readline_wrapper_line removes the handler after a line is
processed. Usually, we'll end up re-displaying the prompt, and that
reinstalls the handler. But if the output is coming out of handling
a stop event, we don't re-display the prompt, and nothing restores the
handler. So the next input wakes up the event loop and calls into
readline, which aborts.
We should do better with the prompt handling while the target is
running (I think we should coordinate with readline, and
hide/redisplay it around output), but that's a more invasive change
better done post 7.8, so this patch is conservative and just
reinstalls the handler as soon as we're out of the readline line
callback.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* top.c (gdb_readline_wrapper_line): Tweak comment.
(gdb_readline_wrapper_cleanup): If readline is enabled, reinstall
the input handler callback.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-bg-execution.c: New file.
* gdb.base/paginate-bg-execution.exp: New file.
This fixes:
$ ./gdb program -ex "set height 2" -ex "start"
...
Reading symbols from /home/pedro/gdb/tests/threads...done.
---Type <return> to continue, or q <return> to quit---^CQuit << ctrl-c triggers a Quit
*type something*
readline: readline_callback_read_char() called with no handler!
Aborted
$
Usually, if an error propagates all the way to the top level, we'll
re-enable stdin, in case the command that was running was a
synchronous command. That's done in the event loop's actual loop
(event-loop.c:start_event_loop). However, if a foreground execution
command is run before the event loop starts and throws, nothing is
presently reenabling stdin, which leaves sync_execution set.
When we do start the event loop, because sync_execution is still
(mistakenly) set, display_gdb_prompt removes the readline input
callback, even though stdin is registered in the event loop. Any
input from here on results in readline aborting.
Such commands are run through catch_command_errors,
catch_command_errors_const, so add the tweak there.
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* main.c: Include event-top.h.
(handle_command_errors): New function.
(catch_command_errors, catch_command_errors_const): Use it.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-execution-startup.c: New file.
* gdb.base/paginate-execution-startup.exp: New file.
* lib/gdb.exp (pagination_prompt): New global.
(default_gdb_spawn): New procedure, factored out from
default_gdb_spawn.
(default_gdb_start): Adjust to call default_gdb_spawn.
(gdb_spawn): New procedure.
Often we'll do something like:
if {$ok} {
fail "whatever"
} else {
pass "whatever"
}
This adds a helper procedure for that, and converts one random place
to use it, as an example.
2014-07-14 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_assert): New procedure.
* gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
The "call" and "print" commands presently always run synchronously, in
the foreground, but GDB currently forgets to put the inferior's
terminal settings into effect while running them, on async-capable
targets, resulting in:
(gdb) print func ()
hello world
Program received signal SIGTTOU, Stopped (tty output).
0x000000373bceb8d0 in __libc_tcdrain (fd=1) at ../sysdeps/unix/sysv/linux/tcdrain.c:29
29 return INLINE_SYSCALL (ioctl, 3, fd, TCSBRK, 1);
The program being debugged was signaled while in a function called from GDB.
GDB remains in the frame where the signal was received.
To change this behavior use "set unwindonsignal on".
Evaluation of the expression containing the function
(func) will be abandoned.
When the function is done executing, GDB will silently stop.
(gdb)
That's because target_terminal_inferior skips actually doing anything
if running in the background, and, nothing is setting sync_execution
while running infcalls:
void
target_terminal_inferior (void)
{
/* A background resume (``run&'') should leave GDB in control of the
terminal. Use target_can_async_p, not target_is_async_p, since at
this point the target is not async yet. However, if sync_execution
is not set, we know it will become async prior to resume. */
if (target_can_async_p () && !sync_execution)
return;
This would best be all cleaned up by making GDB not even call
target_terminal_inferior and try to pass the terminal to the inferior
if running in the background, but that's a more invasive fix that is
better done post-7.8.
This was originally caught by a patch later in this series that makes
catch_command_errors use exception_print instead of
print_any_exception. Note that print_flush calls serial_drain_output
while print_any_exception doesnt't have that bit. And,
gdb.gdb/python-selftest.exp does:
gdb_test "call catch_command_errors(execute_command, \"python print 5\", 0, RETURN_MASK_ALL)" \
"Python not initialized.* = 0"
which without this fix results in SIGTTOU...
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
* infcall.c (run_inferior_call): Set 'sync_execution' while
running the inferior call.
gdb/testsuite/
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/execution-termios.c: New file.
* gdb.base/execution-termios.exp: New file.
This fixes PR 17106, a regression in printing.
The bug is that resolve_dynamic_type follows struct members and
references, but doesn't consider the possibility of infinite
recursion.
This patch fixes the problem by limiting reference following to the
topmost layer of calls -- that is, reference-typed struct members are
never considered as being VLAs.
Built and regtested on x86-64 Fedora 20.
New test case included.
2014-07-14 Tom Tromey <tromey@redhat.com>
PR exp/17106:
* gdbtypes.c (is_dynamic_type_internal): New function, from
is_dynamic_type.
(is_dynamic_type): Rewrite.
(resolve_dynamic_union): Use resolve_dynamic_type_internal.
(resolve_dynamic_struct): Likewise.
(resolve_dynamic_type_internal): New function, from
resolve_dynamic_type.
(resolve_dynamic_type): Rewrite.
2014-07-14 Tom Tromey <tromey@redhat.com>
* gdb.cp/vla-cxx.cc: New file.
* gdb.cp/vla-cxx.exp: New file.
This fixes the record "run" regression pointed out by Marc Khouzam:
https://sourceware.org/ml/gdb/2014-06/msg00096.html
The bug is that target_require_runnable must agree with the handling
of the "run" target, but currently it is out of sync. This patch
fixes the problem by changing target_require_runnable to also ignore
the record_stratum.
Built and regtested on x86-64 Fedora 20.
New test case included.
2014-07-14 Tom Tromey <tromey@redhat.com>
* target.c (target_require_runnable): Also check record_stratum.
Update comment.
2014-07-14 Tom Tromey <tromey@redhat.com>
* gdb.reverse/rerun-prec.c: New file.
* gdb.reverse/rerun-prec.exp: New file.
Right now we provide a board info entry, `gdb_init_command', that allows
one to send a single command to GDB before the program to be debugged is
started. This is useful e.g. for slow remote targets to change the
default "remotetimeout" setting. Occasionally I found a need to send
multiple commands instead, however this cannot be achieved with
`gdb_init_command'.
This change therefore extends the mechanism by adding a TCL list of GDB
commands to send, via a board info entry called `gdb_init_commands'.
There is no limit as to the number of commands put there. The old
`gdb_init_command' mechanism remains supported for compatibility with
existing people's environments.
* lib/gdb-utils.exp: New file.
* lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
inline `gdb_init_command' processing.
(gdb_start_cmd): Likewise.
* lib/mi-support.exp (mi_run_cmd): Likewise.
* README: Document `gdb_init_command' and `gdb_init_commands'.
We see the following fails on arm-none-eabi target,
print (void*)v_signed_char^M
$190 = (void *) 0x0 <_ftext>^M
(gdb) FAIL: gdb.base/exprs.exp: print (void*)v_signed_char (print
(void*)v_signed_char)
GDB behaves correctly but the test assumes there is no symbol on
address 0x0. This patch is set print symbol off, so that tests below
can match the address only.
gdb/testsuite:
2014-07-11 Yao Qi <yao@codesourcery.com>
* gdb.base/exprs.exp: "set print symbol off".
Here's an example, with the new test:
gdbserver :9999 gdb.threads/kill
gdb gdb.threads/kill
(gdb) b 52
Breakpoint 1 at 0x4007f4: file kill.c, line 52.
Continuing.
Breakpoint 1, main () at kill.c:52
52 return 0; /* set break here */
(gdb) k
Kill the program being debugged? (y or n) y
gdbserver :9999 gdb.threads/kill
Process gdb.base/watch_thread_num created; pid = 9719
Listening on port 1234
Remote debugging from host 127.0.0.1
Killing all inferiors
Segmentation fault (core dumped)
Backtrace:
(gdb) bt
#0 0x00000000004068a0 in find_inferior (list=0x66b060 <all_threads>, func=0x427637 <kill_one_lwp_callback>, arg=0x7fffffffd3fc) at src/gdb/gdbserver/inferiors.c:199
#1 0x00000000004277b6 in linux_kill (pid=15708) at src/gdb/gdbserver/linux-low.c:966
#2 0x000000000041354d in kill_inferior (pid=15708) at src/gdb/gdbserver/target.c:163
#3 0x00000000004107e9 in kill_inferior_callback (entry=0x6704f0) at src/gdb/gdbserver/server.c:2934
#4 0x0000000000406522 in for_each_inferior (list=0x66b050 <all_processes>, action=0x4107a6 <kill_inferior_callback>) at src/gdb/gdbserver/inferiors.c:57
#5 0x0000000000412377 in process_serial_event () at src/gdb/gdbserver/server.c:3767
#6 0x000000000041267c in handle_serial_event (err=0, client_data=0x0) at src/gdb/gdbserver/server.c:3880
#7 0x00000000004189ff in handle_file_event (event_file_desc=4) at src/gdb/gdbserver/event-loop.c:434
#8 0x00000000004181c6 in process_event () at src/gdb/gdbserver/event-loop.c:189
#9 0x0000000000418f45 in start_event_loop () at src/gdb/gdbserver/event-loop.c:552
#10 0x0000000000411272 in main (argc=3, argv=0x7fffffffd8d8) at src/gdb/gdbserver/server.c:3283
The problem is that linux_wait_for_event deletes lwps that have exited
(even those not passed in as lwps of interest), while the lwp/thread
list is being walked on with find_inferior. find_inferior can handle
the current iterated inferior being deleted, but not others.
When killing lwps, we don't really care about any of the pending
status handling of linux_wait_for_event. We can just waitpid the lwps
directly, which is also what GDB does (see
linux-nat.c:kill_wait_callback). This way the lwps are not deleted
while we're walking the list. They'll be deleted by linux_mourn
afterwards.
This crash triggers several times when running the testsuite against
GDBserver with the native-gdbserver board (target remote), but as GDB
can't distinguish between GDBserver crashing and "kill" being
sucessful, as in both cases the connection is closed (the 'k' packet
doesn't require a reply), and the inferior is gone, that results in no
FAIL.
The patch adds a generic test that catches the issue with
extended-remote mode (and works fine with native testing too). Here's
how it fails with the native-extended-gdbserver board without the fix:
(gdb) info threads
Id Target Id Frame
6 Thread 15367.15374 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
5 Thread 15367.15373 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
4 Thread 15367.15372 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
3 Thread 15367.15371 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
2 Thread 15367.15370 0x000000373bcbc98d in nanosleep () at ../sysdeps/unix/syscall-template.S:81
* 1 Thread 15367.15367 main () at .../gdb.threads/kill.c:52
(gdb) kill
Kill the program being debugged? (y or n) y
Remote connection closed
^^^^^^^^^^^^^^^^^^^^^^^^
(gdb) FAIL: gdb.threads/kill.exp: kill
Extended remote should remain connected after the kill.
gdb/gdbserver/
2014-07-11 Pedro Alves <palves@redhat.com>
* linux-low.c (kill_wait_lwp): New function, based on
kill_one_lwp_callback, but use my_waitpid directly.
(kill_one_lwp_callback, linux_kill): Use it.
gdb/testsuite/
2014-07-11 Pedro Alves <palves@redhat.com>
* gdb.threads/kill.c: New file.
* gdb.threads/kill.exp: New file.
We see the fail below happens on thumb related multi-libs
(-mthumb -march={armv4t,armv7-a}),
target tfile tfile-basic.tf ^M
warning: Uploaded tracepoint 1 has no source location, using raw address^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
Tracepoint 3 at 0x8958: file /scratch/yqi/arm-none-linux-gnueabi/src/gdb-trunk/gdb/testsuite/gdb.trace/tfile.c, line 91.^M
Created tracepoint 3 for target's tracepoint 1 at 0x8959.^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
warning: Breakpoint address adjusted from 0x00008959 to 0x00008958.^M
(gdb) FAIL: gdb.trace/tfile.exp: complete-command 'target tfile'
The address of write_basic_trace_file is two-bytes aligned,
(gdb) p write_basic_trace_file
$1 = {void (void)} 0x8958 <write_basic_trace_file>
but the ld sets the LSB of every reference to the function address
(indicating the address is in thumb mode), so "&write_basic_trace_file"
in the program becomes 0x8959, which is saved in the trace file. That
is why the warnnings are emitted.
This patch is to clear the LSB of the function address written to trace
file in thumb and thumb2 mode. This patch fixes the fail above.
gdb/testsuite:
2014-07-10 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.c (write_basic_trace_file)
[__thumb__||__thumb2__]: Clear the Thumb bit of the function
address written to trace file.
On async targets, a synchronous attach is done like this:
#1 - target_attach is called (PTRACE_ATTACH is issued)
#2 - a continuation is installed
#3 - we go back to the event loop
#4 - target reports stop (SIGSTOP), event loop wakes up, and
attach continuation is called
#5 - among other things, the continuation calls
target_terminal_inferior, which removes stdin from the event
loop
Note that in #3, GDB is still processing user input. If the user is
fast enough, e.g., with something like:
echo -e "attach PID\nset xxx=1" | gdb
... then the "set" command is processed before the attach completes.
We get worse behavior even, if input is a tty and therefore
readline/editing is enabled, with e.g.,:
(gdb) attach PID\nset xxx=1
we then crash readline/gdb, with:
Attaching to program: attach-wait-input, process 14537
readline: readline_callback_read_char() called with no handler!
Aborted
$
Fix this by calling target_terminal_inferior before #3 above.
The test covers both scenarios by running with editing/readline forced
to both on and off.
gdb/
2014-07-09 Pedro Alves <palves@redhat.com>
* infcmd.c (attach_command_post_wait): Don't call
target_terminal_inferior here.
(attach_command): Call it here instead.
gdb/testsuite/
2014-07-09 Pedro Alves <palves@redhat.com>
* gdb.base/attach-wait-input.exp: New file.
* gdb.base/attach-wait-input.c: New file.
