* infrun.c (handle_inferior_event): Replace prev_pc test in all
calls to bpstat_stop_status (removed in 1999-09-24). This test
helps distinguish stepping over a breakpoint trap from stepping
thru a jump to the instruction after a breakpoint trap.
(handle_inferior_event): Don't bother writing the PC if
DECR_PC_AFTER_BREAK is zero (optimization).
* breakpoint.c (bpstat_stop_status): Add comment explaining the
purpose and usage of the "not_a_breakpoint" argument in computing
the breakpoint address.
* monitor.c (setmem_resp_delim_pattern): New regexp pattern.
(setreg_resp_delim_pattern): Likewise.
(setmem_resp_delim_fastmap): New buffer.
(setreg_resp_delim_fastmap): Likewise.
(monitor_open): Initialize above regexp if they are defined.
(monitor_write_memory): Use regexp to check the result of write.
(monitor_store_register): Likewise to check result of register set.
* infrun.c: Eliminate the "thread_step_needed" state variable,
and replace it with a relatively simple test in resume.
(resume): Replace thread_step_needed logic with a test for
stepping, breakpoint_here_p and breakpoints_inserted.
Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic.
(proceed): Discard thread_step_needed logic.
(wait_for_inferior, fetch_inferior_event, handle_inferior_event):
Discard thread_step_needed logic.
* remote-rdi.c (arm_rdi_wait): Fix return type in prototype.
* rdi-share/host.h: Add missing parenthesis in conditional.
2001-06-22 J.T. Conklin <jtc@redback.com>
* configure.in: include nlist.h when checking for member som_addr
in struct so_map.
* configure: regenerate.
definitions. Generate an error when both pure multi-arch and
"tm.h".
* gdbarch.h, gdbarch.c: Regenerate.
* defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
* infrun.c (context_switch): New function. Abstract the operation
of saving and restoring infrun's state when switching threads.
(handle_inferior_event): Normalize the handling of the 'thread hop'
event (when the wrong thread hits a thread-specific breakpoint,
and we need to solo-step that thread past the breakpoint).
Call keep_going, instead of target_resume. Handle the subsequent
singlestep-trap as a normal event instead of just resuming.
(EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
predicate.
* gdbarch.h, gdbarch.c: Regenerate.
* values.c (value_being_returned): Change the reference to
EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
* remote.c (show_remote_protocol_qSymbol_packet_cmd,
set_remote_protocol_qSymbol_packet_cmd): New functions.
(init_all_packet_configs, show_remote_cmd): Add qSymbol packet.
(remote_check_symbols): New function. Implement qSymbol packet,
allowing target to request symbol lookup service from gdb.
(remote_open_1, remote_async_open_1): Call remote_check_symbols,
allowing symbol lookup from exec_bfd on connection to target.
(remote_new_objfile): New function. Catch new objfile notifications
from shared library module, and call remote_check_symbols.
(_initialize_remote): Hook remote_new_objfile into the shared
library notification chain. Add "set remote symbol-lookup" command.
* gdbthread.h (struct thread_info): Add new fields:
current_line, current_symtab, step_sp, for saved infrun state.
* thread.c (save_infrun_state, load_infrun_state): Save and
restore current_line, current_symtab, and step_sp.
(add_thread): Rather than adding assignments to initialize
the new fields, just use memset (tp, 0, sizeof (*tp).
This way future new fields will not be overlooked.
* infrun.c (handle_inferior_event): Save and restore save_sp,
current_line, and current_symtab when switching threads.
(line_completion_function): If we are completing on locations,
back up the start of word pointer past all characters which can
appear in a location spec.
(location_completer): New function.
* completer.h: Add prototype for location_completer.
* symtab.c (make_source_files_completion_list)
(add_filename_to_list, not_interesting_fname): New functions.
(filename_seen): New function, body extracted from
output_source_filename.
(output_source_filename): Call filename_seen to check if the file
was already printed.
(make_symbol_completion_list): If TEXT includes a
double-quoted string, return an empty list, not NULL.
(make_file_symbol_completion_list): New function, similar to
make_symbol_completion_list but with an additional argument
SRCFILE.
* symtab.h (make_file_symbol_completion_list)
(make_source_files_completion_list): Add prototypes.
* breakpoint.c (_initialize_breakpoint): Make location_completer
be the completion function for all commands which set breakpoints
and watchpoints.
(top-level): #include "completer.h".
* tracepoint.c (_initialize_tracepoint): Make location_completer
be the completion function for the "trace" command.
(top-level): #include "completer.h".
* printcmd.c (_initialize_printcmd): Make location_completer be
the completion function for the "print", "inspect", "call", and
"disassemble" commands.
(top-level): #include "completer.h".
* infcmd.c (_initialize_infcmd): Make location_completer be the
completion function for the "go", "jump", and "until" commands.
(top-level): #include "completer.h".
* breakpoint.c (delete_breakpoint): Pass mark_inserted to
remove_breakpoint, so that the subsequent test for
bpt->inserted will succeed, and duplicates will be fixed up.
a little more portable.
Don't use shell's echo command to put strings containing
escaped characeters into a file -- different flavors of /bin/sh
require differnt levels of escaping. Use cat <<EOF instead.
Our internal field separator is a colon. Change all
commands which assume it is a space.
(iterate_over_lwps): Make sure we can handle CALLBACK deleting the
LWP it's called for.
(lin_lwp_attach): Mark LWP as resumed to make sure the fake
SIGSTOP is reported.
(resume_clear_callback): New function.
(resume_set_callback): New function.
(lin_lwp_resume): Mark all LWP's that we're going to resume as
resumed, and unmark all others.
(status_callback): Only report a pending wait status if we pretend
that LP has been resumed.
(resumed_callback): New function.
(lin_lwp_wait): Add assertions to check that LWP's are properly
marked as resumed. Partially revert 2001-05-25 patch by Michael
Snyder: do not resume all threads. Add comment explaining the
problems associated with this bit of code.
* config/mips/irix6.mh: New file.
* config/mips/irix6.mt: New file.
* config/mips/xm-irix6.h: New file.
* config/mips/nm-irix6.h: New file.
* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
disassembler info in tm_print_insn_info as appropriate for the N32
ABI. Force N32 ABI to be the default if the CPU is R8000 or
R10000.
* configure.tgt (mips*-sgi-irix6*): Map to irix6.
* configure.host (mips*-sgi-irix6*): Ditto.
stopped due to a Ctrl-C as well as breakpoints.
* hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
support thread switches after Ctrl-C.
* lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
* linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
* m3-nat.c (mach3_prepare_to_proceed): Ditto.
instead of system-specific define's like _WIN32 and __MSDOS__.
Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
ROOTED_P.
(top-level): #include "filenames.h".
* solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
instead of SLASH_CHAR, ROOTED_P and SLASH_P.
(top-level): #include "filenames.h".
* defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
(SLASH_STRING): Define only for _WIN32.
* completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
__MSDOS_.
* cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
(top-level): #include "filenames.h".
than requiring that all per-architecture data be registered before
the first gdbarch object is allocated.
* gdbarch.sh: Changes to effect the following:
* gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
declarations and definitions.
(check_gdbarch_data): New function, and declaration.
(gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
zero is good enough.
(free_gdbarch_data): Tolerate a null data pointer. Free only
those data items gdbarch->data actually has allocated.
(set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
(gdbarch_update_p): No need to call init_gdbarch_data.
* thread.c (delete_step_resume_breakpoint): New function.
Maintain internal consistency of the thread list while deleting
a step_resume_breakpoint.
* gdbthread.h (delete_step_resume_breakpoint): Export.
* breakpoint.c (bpstat_find_step_resume_breakpoint):
Make thread-aware: don't return a step_resume_breakpoint
for the wrong thread.
* infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
instead of delete_breakpoint_current_contents.
(fetch_inferior_event): Ditto.
(handle_inferior_event): Call delete_step_resume_breakpoint
instead of delete_breakpoint.
* infrun.c (handle_inferior_event): After singlestepping over a
thread-specific breakpoint, use currently_stepping() to decide
whether to step or continue.
* lin-lwp.c (lin_lwp_attach_lwp): Call stop_wait_callback,
to consume the SIGSTOP generated by PTRACE_ATTACH.
(stop_wait_callback): If a SIGTRAP or a SIGINT event is consumed,
try again to get the SIGSTOP event.
(lin_lwp_wait): Resume all threads when ignoring a signal.
This will insure that newly attached threads get resumed.
(gnu_pid_to_exec_file): Add PID parameter.
(set_sig_thread_cmd): Use PIDGET on return value from
thread_id_to_pid.
(proc_string): Use MERGEPID to construct argument to
pid_to_thread_id.
* thread-db.c: Allow for defunct zombie threads.
(attach_thread): Do not attempt to attach zombie thread.
(thread_db_thread_alive): Return false for defunct zombie thread.
(find_new_threads_callback): Don't add defunct zombie thread to list.
(Includes changes by Dan Berlin.)
* gnu-v3-abi.c: New file.
* minsyms.c: #include "value.h" and "cp-abi.h".
(install_minimal_symbols): Check the minimal symbol table for
symbols that look mangled in the V3 style, and select the V3 ABI
if we find any.
* Makefile.in (SFILES): Add gnu-v3-abi.c.
(COMMON_OBS): Add gnu-v3-abi.o.
(gnu-v3-abi.o): Add new rule.
(minsyms.o): Depend on $(cp_abi_h) and $(value_h).
Changes by Jim Ingham:
* values.c (value_change_enclosing_type): New function. If the
new enclosing type is larger than the old one, we need to allocate
more space.
* value.h: Add value_change_enclosing_type prototype.
* valops.c (value_cast): Use it.
(value_assign): Use it.
(value_addr): Use it.
(value_ind): Use it.
(value_full_object): Use it.
2001-05-07 Daniel Berlin <dan@cgsoftware.com>
* values.c (value_static_field): Handle static fields that have a constant value.
* remote.c (hex2bin): Make first argument const.
Require explicit count, don't accept null-terminated str.
(remote_resume, remote_async_resume): White space fix-up.
basename (NAME). The FreeBSD basename returns a pointer to a
static buffer, even if it's simply returning a string identical to
its argument.
(lookup_partial_symtab): Likewise.
* ser-unix.c (rate_to_code): Issue warning if baud rate is invalid.
(hardwire_setbaudrate): Set errno to EINVAL and return with error
if the conversion of the baud rate to code fails.
* remote.c (bin2hex, hex2bin): New functions. Factor out these
two conversions which are coded for repeatedly in this module.
(remote_threads_extra_info, remote_wait, remote_async_wait,
store_register_using_P, remote_store_registers, remote_write_bytes,
remote_read_bytes, remote_rcmd): Use bin2hex and hex2bin instead
of coding the conversions inline.
(fromhex): Not exported, change from extern to static.
and gdbtk-stack.o.
(SUBDIR_GDBTK_SRCS): Ditto for the sources.
(gdbtk-bp.o): New rule.
(gdbtk-register.o): New rule.
(gdbtk-stack.o): New rule.
(gdbtk-cmds.o): Update dependencies.
(gdbtk.o): Ditto.
(gdbtk-hooks.o): Ditto.
(gdbtk-varobj.o): Ditto.
* symfile.c (symbol_file_add_main_1): New static function.
Passes the flags arguments to symbol_file_add() and takes care
of any necessary reinitializations.
(symbol_file_command): Call symbol_file_add_main_1() instead of
symbol_file_add().
(symbol_file_add_main): Ditto.
* sh3-rom.c (_initialize_sh3_rom): Get rid of specific _WINDOWS
conditional for help with connections through parallel ports,
given that the actual code for downloading through a parallel port
is not conditionalized.
* sh-tdep.c: Remove WIN32_WCE conditional. The wince sh target is
unmaintaned, and probably on its way to obsolescence.
(i386_register_convertible): New function.
* config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
of i386_register_virtual_type.
(REGISTER_CONVERTIBLE): Redefine in terms of
i386_register_convertible.
(i386_register_virtual_type, i386_register_convertible): New
prototypes.
