a procedure. Accept blanks or TABs as whitespace, increase
timeout and expect input buffer size for the large output
from the command. Remove "i*86-*-bsdi2.0" xfail.
* configure.tgt: Add i386lelf to targ_extra_emuls for
i[345]86-*-linuxaout* and i[345]86-*-linuxoldld. For
i[345]86-*-linux*, set targ_emul to i386lelf, and add elf_i386 to
targ_extra_emuls.
* emulparams/i386lelf.sh: New file, a copy of elf_i386.sh.
* emultempl/elf32.em: If TARGET_IS_i386lelf, use autoconf
recommended mechanism to define DIR and struct dirent.
(libcmp): New static function use only when TARGET_IS_i386lelf.
(gld${EMULATION_NAME}_open_dynamic_archive): Likewise.
* Makefile.in (ALL_EMULATIONS): Add ei386lelf.o
(ei386lelf.c): New target.
* configure: Rebuild.
* Makefile.in (INSTALL): Revert to using install.sh.
(INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
(INSTALL_XFORM, INSTALL_XFORM1): Restore.
(CC_FOR_BUILD): Restore.
(gencode): Build using $(CC_FOR_BUILD).
(install): Don't install in $(tooldir).
* configure: Rebuild.
* Makefile.in (INSTALL): Revert to using install.sh.
(INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
(INSTALL_XFORM, INSTALL_XFORM1): Restore.
(mostlyclean): Make the same as clean, not distclean.
(clean): Remove config.log.
(install): Don't install in $(tooldir).
* configure: New file, built by autoconf.
* acconfig.h: New file.
* config.in: New file, built by autoheader.
* Makefile.in: Various changes for new configure script. Also:
(INSTALL): Go up two levels, not one.
(ALLOCA, MALLOC, OPCODES): Remove.
(gencode): Use $(CC_FOR_BUILD).
(case.o): Remove.
(run.o, interp.o): Depend upon config.h.
* interp.c: Include "config.h". Don't include "sysdep.h".
Include <stdlib.h>, <time.h>, and <unistd.h> if they exist.
* run.c: Include "config.h". Don't include "sysdep.h". Include
<stdlib.h> if it exists. Include "getopt.h". Declare printf if
necessary.
bfd/hosts/*.h file or bfd/config/*.mh file. Call AC_PROG_CC and
AC_PROG_RANLIB. Substitute in values for CFLAGS, HDEFINES and AR.
Call AC_CHECK_HEADERS for stdlib.h and time.h. Touch stamp.h if
creating config.h.
* configure: Rebuild.
* Makefile.in (AR): Define as @AR@.
(CC): New variable, defined as @CC@.
(CFLAGS): Define as @CFLAGS@.
(RANLIB): Define as @RANLIB@.
(HDEFINES, TDEFINES): New variables.
(@host_makefile_frag@): Remove.
(compile.o, run.o): Depend upon config.h.
(mostlyclean): Make the same as clean, not distclean.
(clean): Remove config.log.
(distclean): Remove config.h and stamp-h.
(Makefile): Don't depend upon @frags@. Just rebuild Makefile when
invoking config.status.
(config.h, stamp-h): New targets.
* compile.c: Include "config.h". Don't include <sys/times.h>.
Include <time.h> and <stdlib.h> if they exist. Don't include
"sysdep.h".
(get_now): Remove unused local b.
* run.c: Include "config.h". Include <stdlib.h> if it exists.
Don't include "sysdep.h".
* writecode.c: Don't include "bfd.h" or "sysdep.h". Include
<stdio.h>.
* macro.c (ISSEP): Remove duplicated `"' character.
(get_any_string): Copy some characters for which ISSEP is true:
';', '>', '(', ')'. Otherwise we can get in an infinite loop.
* read.c (s_space): In MRI mode, the expressions stop at the first
unquoted space.
(cons_worker): In MRI mode, restore the terminating character at
the end of the function.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
Check for config.h:config.in when creating stamp-h.
* configure: Rebuild.
* Makefile.in (stamp-h): Depend upon config.in rather than
config.h.in. Set CONFIG_HEADERS to config.h:config.in when
calling config.status.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
Check for config.h:config.in when creating stamp-h.
* configure: Rebuild.
* Makefile.in (stamp-h): Depend upon config.in rather than
config.h.in. Set CONFIG_HEADERS to config.h:config.in when
calling config.status.
* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
* configure: Rebuild.
* Makefile.in (stamp-h): Set CONFIG_HEADERS to config.h:config.in
when calling config.status.
BFD_HOST_64BIT_LONG.
(print_radix): New static variable.
(set_print_radix): Set print_radix. Adjust changes to
value_format.
(print_value): New static function, to print 64 bit octal and
decimal values correctly.
(print_symbol_info_bsd): Check BFD64, not BFD_HOST_64_BIT. Use
print_value.
(print_symbol_info_sysv): Use print_value.
(print_symbol_info_posix): Likewise.
* gas/mri/mri.exp: Run it.
* gas/mri/expr.s: Remove whitespace in operand field.
* gas/mri/for.s: Add comments for further testing.
* gas/macros/test2.s: Put in an upper case ELSE to test case
insensitivity.
at newline characters. In MRI mode, always keep spaces in the
operands field. In MRI mode, treat a line comment character as a
regular comment character following a space.
* cond.c (ignore_input): Use strncasecmp rather than strncmp when
looking for special pseudo-ops.
* read.c (cons_worker): In MRI mode, the expressions stop at the
first unquoted space.
(equals): Likewise.
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
