Similar to the powerpc64 patch, this improves overflow checking in
elf32-ppc.c. Many reloc "howto" entries needed fixes, some just
cosmetic.
The patch also fixes the R_PPC_VLE_SDA21 reloc application code, which
was horribly broken. In fact, it may still be broken since Power ISA
2.07 says e_li behaves as
RT <- EXTS(li20 1:4 || li20 5:8 || li20 0 || li20 9:19)
where li20 is a field taken from bits 17..20, 11..15, 21..31 of the
instruction. Freescale VLEPEM says differently, and I assume
correctly, that
RT <- EXTS(li20 0:3 || li20 4:8 || li20 9:19)
The VLE_SDA21 relocation description matches this too.
Now the VLE_SDA21 relocation specifies in the case where e_addi16 is
converted to e_li for symbols in .PPC.EMB.sdata0 or .PPC.EMB.sbss0
(no base register), that the field is restricted to 16 bits, with the
sign bit being propagated to the top 4 bits. I don't see the sense in
restricting the value like this, so have allowed the full 20 bit
signed value. This of course is compatible with the reloc description
in that values in the 16 bit signed range will result in exactly the
same insn field as when the reloc description is followed to the
letter.
* elf32-ppc.c (ppc_elf_howto_raw): Correct overflow check for
many relocations. Correct bitsize and rightshift too for a number
of VLE relocs. Describe R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO.
Correct dst_mask on R_PPC_VLE_SDA21_LO.
(ppc_elf_vle_split16): Tidy, delete unnecessary prototype.
(ppc_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value. Tidy vle split16 code.
Correct R_PPC_VLE_SDA21 and R_PPC_VLE_SDA21_LO handling.
R_PPC64_ADDR16 is used in three contexts:
- .short data relocation
- 16-bit signed insn fields, eg. addi
- 16-bit unsigned insn fields, eg. ori
In the first case we want to allow both signed and unsigned 16-bit
values, the latter two ought to error if the field exceeds the range
of values allowed for 16-bit signed and unsigned integers
respectively. These conflicting requirements meant that ld had to
choose the least restrictive overflow checks, and thus it is possible
to construct testcases where an addi field overflows but is not
reported by ld. Many relocations dealing with 16-bit insn fields have
this problem. What's more, some relocations that are only ever used
for signed fields of instructions woodenly copied the lax overflow
checking of R_PPC64_ADDR16.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Use complain_overflow_signed
for R_PPC64_ADDR14, R_PPC64_ADDR14_BRTAKEN, R_PPC64_ADDR14_BRNTAKEN,
R_PPC64_SECTOFF, R_PPC64_ADDR16_DS, R_PPC64_SECTOFF_DS,
R_PPC64_REL16 entries. Use complain_overflow_dont for R_PPC64_TOC.
(ppc64_elf_relocate_section): Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
gold/
* powerpc.cc (Powerpc_relocate_functions::Overflow_check): Add
CHECK_UNSIGNED, CHECK_LOW_INSN, CHECK_HIGH_INSN.
(Powerpc_relocate_functions::has_overflow_unsigned): New function.
(Powerpc_relocate_functions::has_overflow_bitfield,
overflowed): Use the above.
(Target_powerpc::Relocate::relocate): Correct overflow checking
for a number of relocations. Modify overflow test for 16-bit
fields in instructions to signed/unsigned according to whether
the field takes a signed or unsigned value.
I noticed GDB was failing to enable threading support for 32-bit AIX
cores. I traced it to failure to read variables from libpthreads.a.
The issue is that data for that library is loaded at a high address,
and bfd is sign extending the section addresses:
(gdb) info files
Symbols from "/home/palves/crash".
Local core dump file:
`/home/palves/core', file type aixcoff-rs6000.
0x2ff22000 - 0x2ff23000 is .stack
0x20000000 - 0x200316e0 is .data
0x20000e90 - 0x200016c0 is .data
0xfffffffff0254000 - 0xfffffffff0297920 is .data
0xfffffffff07b46a8 - 0xfffffffff07b47c8 is .data
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
0xfffffffff06dafe0 - 0xfffffffff07b3838 is .data
Local exec file:
`/home/palves/crash', file type aixcoff-rs6000.
Entry point: 0x20001394
0x10000150 - 0x10000e90 is .text
0x20000e90 - 0x2000149c is .data
0x2000149c - 0x200016c0 is .bss
0xd053b124 - 0xd053e15f is .text in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254000 - 0xf0297920 is .data in /usr/lib/libpthreads.a(shr_comm.o)
0xf0254450 - 0xf0297920 is .bss in /usr/lib/libpthreads.a(shr_comm.o)
0xd053a280 - 0xd053aabe is .text in /usr/lib/libcrypt.a(shr.o)
0xf07b46a8 - 0xf07b47c8 is .data in /usr/lib/libcrypt.a(shr.o)
0xf07b47c8 - 0xf07b47c8 is .bss in /usr/lib/libcrypt.a(shr.o)
0xd04fb180 - 0xd053917e is .text in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
0xf029bf64 - 0xf029bfcc is .bss in /usr/lib/libpthreads.a(shr_xpg5.o)
0xd0100900 - 0xd04fa39c is .text in /usr/lib/libc.a(shr.o)
0xf06dafe0 - 0xf07b3838 is .data in /usr/lib/libc.a(shr.o)
0xf0751e94 - 0xf07b3838 is .bss in /usr/lib/libc.a(shr.o)
Notice:
...
0xfffffffff0298000 - 0xfffffffff029bfcc is .data
...
Those are the bfd section start/end addresses. It't not visible here:
...
0xf0298000 - 0xf029bfcc is .data in /usr/lib/libpthreads.a(shr_xpg5.o)
...
... just because GDB trims that number to 32-bit when printing.
GDB then fails to find the memory for libpthreads.a variables in the
core, and falls back to reading it directly from the executable (which
yields the values as originally initialized in the code).
E.g.:
(gdb) p &__n_pthreads
$2 = (<data variable, no debug info> *) 0xf074fda8 <__n_pthreads>
(gdb) p __n_pthreads
$1 = -1
That should have returned 2 instead of -1.
bfd/
2014-03-07 Pedro Alves <palves@redhat.com>
* rs6000-core.c (rs6000coff_core_p): Cast pointers to bfd_vma
through ptr_to_uint instead of through long.
This adds support for "func@localentry", an expression that returns the
ELFv2 local entry point address of function "func". I've excluded
dynamic relocation support because that obviously would require glibc
changes.
include/elf/
* ppc64.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
bfd/
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_ADDR64_LOCAL entry.
(ppc64_elf_reloc_type_lookup): Support R_PPC64_ADDR64_LOCAL.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* Add BFD_RELOC_PPC64_ADDR64_LOCAL.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): Support @localentry.
(md_apply_fix): Support R_PPC64_ADDR64_LOCAL.
ld/testsuite/
* ld-powerpc/elfv2-2a.s, ld-powerpc/elfv2-2b.s: New files.
* ld-powerpc/elfv2-2exe.d, ld-powerpc/elfv2-2so.d: New files.
* ld-powerpc/powerpc.exp: Run new test.
elfcpp/
* powerpc.h (R_PPC64_REL24_NOTOC, R_PPC64_ADDR64_LOCAL): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::local, global): Support
R_PPC64_ADDR64_LOCAL.
(Target_powerpc::Relocate::relocate): Likewise.
2014-02-04 Heiher <r@hev.cc>
* elfxx-mips.c (mips_set_isa_flags): Use E_MIPS_ARCH_64R2 for
Loongson-3A.
(mips_mach_extensions): Make bfd_mach_mips_loongson_3a an
extension of bfd_mach_mipsisa64r2.
opcodes/
2014-02-04 Heiher <r@hev.cc>
* mips-dis.c (mips_arch_choices): Usee ISA_MIPS64R2 for Loongson-3A.
gas/
2014-02-04 Heiher <r@hev.cc>
* config/tc-mips.c (mips_cpu_info_table): Use ISA_MIPS64R2 for
Loongson-3A.
using Thumb2 instructions for those cores which do not support the ARM ISA.
* elf32-arm.c (elf32_thumb2_plt0_entry): New array.
(elf32_thumb2_plt_entry): New array.
(elf32_arm_create_dynamic_sections): Set PLT entry sizes when
using thumb2 based PLT.
(elf32_arm_populate_plt_entry): Handle generating Thumb2 based PLT
entries.
(elf32_arm_final_link_relocate): Do not bias jumps to Thumb based
PLT entries.
(elf32_arm_finish_dynamic_sections): Handle creation of Thumb2
based PLT 0-entry.
(elf32_arm_output_plt_map_1): Handle creation of local symbols for
Thumb2 based PLT 0-entry.
(elf32_arm_output_arch_local_syms): Handle creation of local
symbols for Thumb2 based PLT entries.
Enabled via the use of a new linker command line option: --long-plt.
* bfd-in.h: Add export of bfd_elf32_arm_use_long_plt.
* bfd-in2.h: Regenerate.
* elf32-arm.c (elf32_arm_plt_entry_long): New array.
(elf32_arm_link_hash_table_create): Set plt_entry_size to 16 if
using long PLT entries.
(bfd_elf32_arm_use_long_plt): New function.
(elf32_arm_populate_plt_entry): Add support for long PLT entries.
* emultempl/armelf.em (OPTION_LONG_PLT): Define.
(PARSE_AND_LIST_LONGOPTS): Add long-plt.
(PARSE_AND_LIST_OPTIONS): Likewise.
(PARSE_AND_LIST_ARGS_CASES): Handle long-plt.
* ld.texinfo: Document --long-plt.
* ld-arm/long-plt-format.s: New test case.
* ld-arm/long-plt-format.d: Expected disassembly.
* ld-arm/arm-elf.exp: Run the new test.
5446cbdf82 broke powerpc-lynxos,
powerpc-netware, powerpc-windiss and powerpc-vxworks.
bfd/
* elf32-ppc.c (ppc_elf_link_hash_table_create): Provide default
params for targets that don't use ppc32elf.em.
ld/
* emulparams/elf32ppcvxworks.sh: Source plt_unwind.sh and
use ppc32elf.em.
* emultempl/ppc32elf.em (ppc_after_open): Don't compile for
vxworks.
(LDEMUL_AFTER_OPEN): Don't set for vxworks.
(PARSE_AND_LIST_LONGOPTS, PARSE_AND_LIST_OPTIONS): Exclude
-secure-plt, -bss-plt and -sdata-got when vxworks.
Intel MPX introduces 4 bound registers, which will be used for parameter
passing in x86-64. Bound registers are cleared by branch instructions.
Branch instructions with BND prefix will keep bound register contents.
This leads to 2 requirements to 64-bit MPX run-time:
1. Dynamic linker (ld.so) should save and restore bound registers during
symbol lookup.
2. Change the current 16-byte PLT0:
ff 35 08 00 00 00 pushq GOT+8(%rip)
ff 25 00 10 00 jmpq *GOT+16(%rip)
0f 1f 40 00 nopl 0x0(%rax)
and 16-byte PLT1:
ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip)
68 00 00 00 00 pushq $index
e9 00 00 00 00 jmpq PLT0
which clear bound registers, to preserve bound registers.
We use 2 new relocations:
to mark branch instructions with BND prefix.
When linker sees any R_X86_64_PC32_BND or R_X86_64_PLT32_BND relocations,
it switches to a different PLT0:
ff 35 08 00 00 00 pushq GOT+8(%rip)
f2 ff 25 00 10 00 bnd jmpq *GOT+16(%rip)
0f 1f 00 nopl (%rax)
to preserve bound registers for symbol lookup and it also creates an
external PLT section, .pl.bnd. Linker will create a BND PLT1 entry
in .plt:
68 00 00 00 00 pushq $index
f2 e9 00 00 00 00 bnd jmpq PLT0
0f 1f 44 00 00 nopl 0(%rax,%rax,1)
and a 8-byte BND PLT entry in .plt.bnd:
f2 ff 25 00 00 00 00 bnd jmpq *name@GOTPCREL(%rip)
90 nop
Otherwise, linker will create a legacy PLT1 entry in .plt:
68 00 00 00 00 pushq $index
e9 00 00 00 00 jmpq PLT0
66 0f 1f 44 00 00 nopw 0(%rax,%rax,1)
and a 8-byte legacy PLT in .plt.bnd:
ff 25 00 00 00 00 jmpq *name@GOTPCREL(%rip)
66 90 xchg %ax,%ax
The initial value of the GOT entry for "name" will be set to the the
"pushq" instruction in the corresponding entry in .plt. Linker will
resolve reference of symbol "name" to the entry in the second PLT,
.plt.bnd.
Prelink stores the offset of pushq of PLT1 (plt_base + 0x10) in GOT[1]
and GOT[1] is stored in GOT[3]. We can undo prelink in GOT by computing
the corresponding the pushq offset with
GOT[1] + (GOT offset - &GOT[3]) * 2
Since for each entry in .plt except for PLT0 we create a 8-byte entry in
.plt.bnd, there is extra 8-byte per PLT symbol.
We also investigated the 16-byte entry for .plt.bnd. We compared the
8-byte entry vs the the 16-byte entry for .plt.bnd on Sandy Bridge.
There are no performance differences in SPEC CPU 2000/2006 as well as
micro benchmarks.
Pros:
No change to undo prelink in dynamic linker.
Only 8-byte memory overhead for each PLT symbol.
Cons:
Extra .plt.bnd section is needed.
Extra 8 byte for legacy branches to PLT.
GDB is unware of the new layout of .plt and .plt.bnd.
bfd/
* elf64-x86-64.c (elf_x86_64_bnd_plt0_entry): New.
(elf_x86_64_legacy_plt_entry): Likewise.
(elf_x86_64_bnd_plt_entry): Likewise.
(elf_x86_64_legacy_plt2_entry): Likewise.
(elf_x86_64_bnd_plt2_entry): Likewise.
(elf_x86_64_bnd_arch_bed): Likewise.
(elf_x86_64_link_hash_entry): Add has_bnd_reloc and plt_bnd.
(elf_x86_64_link_hash_table): Add plt_bnd.
(elf_x86_64_link_hash_newfunc): Initialize has_bnd_reloc and
plt_bnd.
(elf_x86_64_copy_indirect_symbol): Also copy has_bnd_reloc.
(elf_x86_64_check_relocs): Create the second PLT for Intel MPX
in 64-bit mode.
(elf_x86_64_allocate_dynrelocs): Handle the second PLT for IFUNC
symbols. Resolve call to the second PLT if it is created.
(elf_x86_64_size_dynamic_sections): Keep the second PLT section.
(elf_x86_64_relocate_section): Resolve PLT references to the
second PLT if it is created.
(elf_x86_64_finish_dynamic_symbol): Use BND PLT0 and fill the
second PLT entry for BND relocation.
(elf_x86_64_finish_dynamic_sections): Use MPX backend data if
the second PLT is created.
(elf_x86_64_get_synthetic_symtab): New.
(bfd_elf64_get_synthetic_symtab): Likewise. Undefine for NaCl.
ld/
* emulparams/elf_x86_64.sh (TINY_READONLY_SECTION): New.
ld/testsuite/
* ld-x86-64/mpx.exp: Run bnd-ifunc-1 and bnd-plt-1.
* ld-x86-64/bnd-ifunc-1.d: New file.
* ld-x86-64/bnd-ifunc-1.s: Likewise.
* ld-x86-64/bnd-plt-1.d: Likewise.
This patch allows the user to override powerpc64-ld's default for
providing linker generated register save and restore functions as used
by gcc -Os code. Normally these are not provided by ld -r, so Linux
kernel modules have needed to include their own copies.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add save_restore_funcs.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Use it to control
provision of out-of-line register save/restore routines.
ld/
* emultempl/ppc64elf.em (params): Init new field.
(ppc_create_output_section_statements): Set params.save_restore_funcs
default.
(PARSE_AND_LIST_*): Add support for --save-restore-funcs and
--no-save-restore-funcs.
execute permission regardless of the underlying PT_LOAD segment permissions.
Deleting this code allows the default linker behavior which is to set the
dynamic segment to the same permissions as the sections that make it up.
This change alters one existing test case to check the segment flags for
PT_DYNAMIC.
bfd/ChangeLog
* elfxx-mips.c(_bfd_mips_elf_modify_segment_map): Deleted hard coding of
PT_DYNAMIC segment flags.
ld/testsuite/ChangeLog
* ld-mips-elf/pic-and-nonpic-3a.sd: Check DYNAMIC segment flags.
abfd->section_count unexpectedly changes between 218 and 248 in:
150 bfd_simple_get_relocated_section_contents (bfd *abfd,
[...]
218 saved_offsets = malloc (sizeof (struct saved_output_info)
219 * abfd->section_count);
[...]
230 _bfd_generic_link_add_symbols (abfd, &link_info);
[...]
248 bfd_map_over_sections (abfd, simple_restore_output_info, saved_offsets);
_bfd_generic_link_add_symbols increases section_count
and simple_restore_output_info later reads unallocated part of saved_offsets.
READ of size 8 at 0x601c0000c5c0 thread T0
#0 0x1124770 in simple_restore_output_info (.../gdb/gdb+0x1124770)
#1 0x10ecd51 in bfd_map_over_sections (.../gdb/gdb+0x10ecd51)
#2 0x1125150 in bfd_simple_get_relocated_section_contents (.../gdb/gdb+0x1125150)
bfd/
2014-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
PR binutils/16595
* simple.c (struct saved_offsets): New.
(simple_save_output_info): Use it for ptr.
(simple_restore_output_info): Use it for ptr. Check section_count.
(bfd_simple_get_relocated_section_contents): Use it for saved_offsets.
Moves assorted variables used to communicate between ld and bfd into
a struct, hooks it into the bfd link_hash_table early, and removes
all other places where such variables were passed piecemeal.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Define.
(ppc64_elf_init_stub_bfd, ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Update prototype.
* elf64-ppp.c (struct ppc_link_hash_table): Add params, delete other
fields now in params. Adjust code throughout file.
(ppc64_elf_init_stub_bfd): Delete "abfd" parameter, add "params".
Save params pointer in htab.
(ppc64_elf_edit_opd, ppc64_elf_tls_setup,
ppc64_elf_setup_section_lists, ppc64_elf_size_stubs,
ppc64_elf_build_stubs): Remove parameters now in "params".
ld/
* emultemps/ppc64elf.em (params): New static struct replacing
various other static vars. Adjust code throughout file.
This fixes the glaring error that the ppc476 workaround wasn't
actually enabled for ld -r, and adjusts relocations to match moved
code.
bfd/
* elf32-ppc.c (ppc_elf_relocate_section): Move relocs on insns
patched for ppc476 workaround. Reapply branch taken/not taken
relocs.
ld/
* emultempl/ppc32elf.em (ppc_after_open_output): Really enable
ppc476 workaround for ld -r.
Adding long-branch stubs for __tls_get_addr calls that are optimised
away is silly. It also causes assertion failures on newer object files
that use R_PPC_TLSGD and R_PPC_TLSLD marker relocs, and half-optimised
(ie. broken) code for older object files.
PR 16546
* elf32-ppc.c (ppc_elf_relax_section): Don't build long-branch
stubs for calls to __tls_get_addr that we know will later be
optimised away.
The Linux kernel builds modules using ld -r. These might need the
ppc476 workaround, so enable it for ld -r if sections have sufficient
alignment to tell location within a page.
bfd/
* elf32-ppc.c (ppc_elf_relax_section): Enable ppc476 workaround
for ld -r, when code sections are sufficiently aligned.
* elf32-ppc.h (struct ppc_elf_params): Delete pagesize. Add
pagesize_p2.
ld/
* emultempl/ppc32elf.em (pagesize): New static var.
(ppc_after_open_output): Set params.pagesize_p2 from pagesize.
(PARSE_AND_LIST_ARGS_CASES): Adjust to use pagesize.
For powerpc64 as HJ did earlier for other ELF targets, and a tidy.
PR gold/15530
* elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Support
--export-dynamic and --dynamic-list marking of symbols.
* elflink.c (bfd_elf_gc_mark_dynamic_ref_symbol): Reorder
cheap tests first.
This patch provides a means for backend relax_section support to
increase the size of a section without needing to reallocate
section contents. This helps reduce memory usage when the added space
does not need to be written in relax_section, as is the case for
powerpc. Writing the stubs later means a few tweaks are needed in the
powerpc relocate_section function, but also removes some code
duplication since the extra ld -r relocs can be written there too.
* elf-bfd.h (struct elf_backend_data): Add caches_rawsize.
* elfxx-target.h (elf_backend_caches_rawsize): Define.
(elfNN_bed): Init new field.
* elflink.c (elf_link_input_bfd): Handle caches_rawsize.
* elf32-ppc.c (shared_stub_entry): Zero addi offset.
(ppc_elf_relax_section): Don't reallocate section here, write
stubs, or write out relocs for ld -r here..
(ppc_elf_relocate_section): ..instead write stubs here, and use
existing code to write out relocs for ld -r. Fix offset
adjustment on reloc for little-endian.
(elf_backend_caches_rawsize): Define.
bfd/
2014-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* coff-rs6000.c (xcoff_write_archive_contents_big): Free OFFSETS in
return paths. Three times.
* elf64-ppc.c (ppc64_elf_link_hash_table_create): Free HTAB in all
return paths.
(ppc64_elf_tls_optimize): Free TOC_REF in return path.
(ppc64_elf_edit_toc): Free USED in return path.
This implements a work-around for an icache bug on 476 that can cause
execution of stale instructions when control falls through from one
page to the next. The idea is to prevent such fall-through by
replacing the last instruction on a page with a branch to a patch
area containing the instruction, then branch to the next page.
The patch also fixes a number of bugs in the existing support for long
branch trampolines.
bfd/
* elf32-ppc.c (struct ppc_elf_link_hash_table): Add params.
Delete emit_stub_syms, no_tls_get_addr_opt. Update all uses.
(ppc_elf_link_params): New function.
(ppc_elf_create_glink): Align .glink to 64 bytes for ppc476
workaround.
(ppc_elf_select_plt_layout): Remove plt_style and emit_stub_syms
parameters. Use htab->params instead.
(ppc_elf_tls_setup): Remove no_tls_get_addr_opt parameter.
(ppc_elf_size_dynamic_sections): Align __glink_PLTresolve to
64 bytes for ppc476 workaround.
(struct ppc_elf_relax_info): New.
(ppc_elf_relax_section): Exclude linker created sections and
those too small to hold one instruction. Don't add another
branch around trampolines on later relax passes. Don't
generate trampolines for undefined symbols when !relocatable,
nor for plugin symbols. Allocate space for ppc476 workaround
patch area. Free fixups on error return path.
(ppc_elf_relocate_section): Handle ppc476 workaround patching.
* elf32-ppc.h (struct ppc_elf_params): New.
(ppc_elf_select_plt_layout, ppc_elf_tls_setup): Update prototype.
(ppc_elf_link_params): Declare.
* section.c (SEC_INFO_TYPE_TARGET): Define.
* bfd-in2.h: Regenerate.
ld/
* emultempl/ppc32elf.em (no_tls_get_addr_opt, emit_stub_syms)
plt_style): Delete. Adjust all refs to instead use..
(params): ..this. New variable.
(ppc_after_open_output): New function. Tweak params and pass to
ppc_elf_link_params.
(ppc_after_open): Adjust ppc_elf_select_plt_layout call.
(ppc_before_allocation): Adjust ppc_elf_tls_setup call. Enable
relaxation for ppc476 workaround.
(PARSE_AND_LIST_*): Add --{no-,}ppc476-workaround support.
(LDEMUL_CREATE_OUTPUT_SECTION_STATEMENTS): Define.
ELFOSABI_GNU for binaries containing unique symbols. So I am reverting that patch and
instead applying the patch below to fix up the targets that were triggering the test failure.
bfd/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* elf32-metag.c (elf_metag_post_process_headers): Call
_bfd_elf_post_process_headers.
* elf32-sh64.c (sh64_elf_copy_private_data): Call
_bfd_elf_copy_private_data.
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Likewise.
binutils/testsuite/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* binutils-all/strip-10.d: Revert previous delta.
abbreviation may not be the current CU. Thus we need to make sure
that when we read the abbreviation we use the correct CU.
* dwarf2.c (find_abstract_instance_name): For DW_FORM_ref_addr
attributes select the CU containing the abbreviation, which may not
be the current CU.
ELFv2 needs fewer relocs to annotate plt call stubs. I correctly
allocated a smaller buffer and wrote the proper relocs, but stupidly
bumped the reloc count as for ELFv1.
* elf64-ppc.c (ppc_build_one_stub): Correct reloc count passed
to get_relocs for ELFv2.
Bad linker script may lead to TLS sections separated by non-TLS sections
in output. This patch changes linker assert to a linker error to
provide better linker diagnosis.
PR ld/16498
* elf.c (_bfd_elf_map_sections_to_segments): Issue a linker error
if TLS sections are not adjacent.
Adds a section for --as-needed libraries to a linker map file, similar
to what we do for archive libraries.
bfd/
* elflink.c (elf_link_add_object_symbols): Call minfo for --as-needed.
ld/
* ldlang.c (asneeded_list_head, asneeded_list_tail): New vars.
(lang_init): Initialise them.
(lang_print_asneeded): New function.
(lang_process): Call lang_print_asneeded.
* ldlang.h (struct asneeded_minfo): New.
(asneeded_list_tail): Declare.
* ldmain.c (add_archive_element): Improve archive map heading.
* ldmisc.c (minfo): Stash --as-needed info.
After resolving a versioned reference, foo@VER1, to a default versioned
definition, foo@@VER1, from a shared object, we also merge it with
the existing regular default symbol definition, foo. When foo is IFUNC
and foo@@VER1 aren't, we will merge 2 incompatible definitions. This
patch avoids merging foo@@VER1 definition with foo definition if
one is IFUNC and the other isn't.
There is nothing linker can do when a type mismatched default definition
are made dynamic by info->shared, info->export_dynamic or h->ref_dynamic.
But we do want to avoid exporting it when building PIE. Let's remove
those checks.
bfd/
PR ld/2404
* elflink.c (_bfd_elf_merge_symbol): Don't check info->shared,
info->export_dynamic, nor !h->ref_dynamic for type mismatch when
adding the default version.
ld/testsuite/
PR ld/2404
* ld-elf/shared.exp: Add a PIE test for PR ld/2404.
When a symbol is absolute, this code in mips_elf_record_got_page_entry
entry = bfd_zalloc (sec->owner, sizeof (*entry));
segfaults. sec == bfd_abs_section_ptr and sec->owner == NULL.
* elfxx-mips.c (mips_elf_record_got_page_entry): Pass in a
mips_elf_traverse_got_arg* rather than mips_got_info*.
Adjust caller. Alloc on output_bfd rather than symbol section
owner.
It has been fixed by
commit 4199e3b866
Author: Alan Modra <amodra@gmail.com>
Date: Wed Jan 15 21:50:55 2014 +1030
non-PIC references to __ehdr_start in pie and shared
Rather than hacking every backend to not discard dynamic relocations
against an undefined hidden __ehdr_start, make it appear to be defined
early. We want __ehdr_start hidden before size_dynamic_sections so
that it isn't put in .dynsym, but we do need the dynamic relocations
for a PIE or shared library with a non-PIC reference. Defining it
early is wrong if we don't actually define the symbol later to its
proper value. (In some cases we want to leave the symbol undefined,
for example, when the ELF header isn't loaded, and we don't have this
infomation available in before_allocation.)
* elf32-i386.c (elf_i386_allocate_dynrelocs): Revert the last
change.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
__ehdr_start will be defined by assign_file_positions_for_non_load_sections
later.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't discard relocs
against __ehdr_start.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
PR ld/16428
* elf32-i386.c (elf_i386_allocate_dynrelocs): Don't update reloc
count if there are any non pc-relative relocs.
* elf64-x86-64.c (elf_x86_64_allocate_dynrelocs): Likewise.
bfd/
2014-01-09 Tristan Gingold <gingold@adacore.com>
* coff-rs6000.c (rs6000coff_vec, pmac_xcoff_vec): use jump
table macros and add macros to initializa the structure.
This patch fixes 2 GNU_RELRO segment bugs:
1. lang_size_sections didn't properly align base to the maximum
alignment power of sections between DATA_SEGMENT_ALIGN and
DATA_SEGMENT_RELRO_END.
2. ld failed to adjust LOAD segment to generate GNU_RELRO segment
when LOAD segment doesn't fit GNU_RELRO segment. This is
https://sourceware.org/bugzilla/show_bug.cgi?id=14207
We "fixed" ld by not generating GNU_RELRO segment. This patch
adjusts LOAD segment to generate GNU_RELRO segment. It fixes
PR ld/16322 and at the same time it also fixes PR binutils/16323
since now we can adjust LOAD segment if it is too small.
bfd/
PR ld/14207
PR ld/16322
PR binutils/16323
* elf.c (_bfd_elf_map_sections_to_segments): Don't check section
size for PT_GNU_RELRO segment.
(assign_file_positions_for_load_sections): If PT_LOAD segment
doesn't fit PT_GNU_RELRO segment, adjust its p_filesz and p_memsz.
ld/
PR ld/14207
PR ld/16322
PR binutils/16323
* ldlang.c (lang_size_sections): Properly align RELRO base.
ld/testsuite/
PR ld/14207
PR ld/16322
PR binutils/16323
* ld-elf/pr16322.d: New file.
* ld-elf/pr16322.s: Likewise.
* ld-x86-64/pr14207.d: Expect PT_GNU_RELRO segment.
This removes the last uses of the obsolete VA_* macros from binutils.
All the binutils and bfd changes were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* elf32-xtensa.c (vsprint_msg): Don't use old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* bucomm.c (fatal, non_fatal): Replace obsolete VA_* macros with
stdarg macros.
* dlltool.c (inform): Replace obsolete VA_* macros with stdarg
macros.
* dllwrap.c (inform, warn): Replace obsolete VA_* macros with
stdarg macros.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
Don't attempt to merge CIEs with a larger number of insns than will
fit in the buffer.
* elf-eh-frame.c (cie_eq): Return false when initial_insn_length
is too large.
(cie_compute_hash): Don't exceed bounds of initial_instructions.
(_bfd_elf_parse_eh_frame): Always set initial_insn_length, and
save as much of insns to initial_instructions[] as will fit.
It is a good pratice to set the SHF_INFO_LINK bit when the sh_info field
represents a section header index.
bfd/
PR binutils/16317
* elf.c (assign_section_numbers): Set the SHF_INFO_LINK bit for
SHT_REL/SHT_RELA sections when setting the sh_info field.
binutils/testsuite/
PR binutils/16317
* binutils-all/readelf.s: Updated.
* binutils-all/readelf.s-64: Likewise.
ld/testsuite/
PR binutils/16317
* ld-elf/linkinfo1.s: New file.
* ld-elf/linkinfo1a.d: Likewise.
* ld-elf/linkinfo1b.d: Likewise.
__CYGWIN__ or __MINGW32__ macro is defined.
(rsrc_cmp): Fix Windows host version and version without wchar header.
[__CYGWIN__, __MINGW32__]: Introduce rsrccmp macro.
Fix coding standard issues.
Include safe-ctype.h.
(HighBitSet, SetHighBit, WithoutHighBit): New macros.
(pe_print_resource_entries): Rename to
rsrc_print_resource_entries. Handle names that are not RVAs.
(pe_print_resource_directory): Rename to
rsrc_print_resource_directory.
(pe_print_rsrc): Rename to rsrc_print_section. Corrupt
computation of RVA bias.
(rsrc_count_entries): New function.
(rsrc_count_directory): New function.
(rsrc_parse_entry): New function.
(rsrc_parse_entries): New function.
(rsrc_parse_directory): New function.
(rsrc_write_string): New function.
(rsrc_compute_rva): New function.
(rsrc_write_leaf): New function.
(rsrc_write_entry): New function.
(rsrc_write_directory): New function.
(u16_mbtouc): New function.
(rsrc_cmp): New function.
(rsrc_print_name): New function.
(rsrc_resource_name): New function.
(rsrc_merge_string_entries): New function.
(rsrc_sort_entries): New function.
(rsrc_attach_chain): New function.
(rsrc_merge): New function.
(rsrc_process_section): New function - merges the contents of a
.rsrc section.
(_bfd_XXi_final_link_postscript): Call rsrc_process_section.
* configure.in (AC_CHECK_HEADERS): Add wchar.h
* config.in: Regenerate.
* configure: Regenerate.
bfd/
* elf.c (assign_file_positions_except_relocs): Set e_type in ELF
header to ET_EXEC for -pie -Ttext-segment=.
2013-12-10 H.J. Lu <hongjiu.lu@intel.com>
* ld-pie/vaddr-0.d: New file.
* ld-pie/vaddr-1.d: Likewise.
* ld-pie/vaddr.s: Likewise.
libx.so refers to some_sym, liby.so provides some_sym@some_version
wasn't seen as satisfying the reference.
* elf64-ppc.c (_bfd_elf_add_default_symbol): Set dynamic_def
and ref_dynamic_nonweak when chaining together indirect
symbols.
an entry in a .rsrc section.
(pe_print_resource_directory): New function: Displays a directory
in a .rsrc section.
(pe_print_rsrc): New function: Displays the contents of .rsrc
section.
(_bfd_XX_print_private_bfd_data_common): Call pe_print_rsrc.
* binutils-all/windres/windres.exp: Run for x86_64-pc-cygwin.
Add test of "objump -p" output.
I don't know what I was thinking here to omit the save of r2.
Possibly I was looking at -msave-toc-indirect code at the time, where
r2 is saved in the function prologue.
* elf64-ppc.c (ppc_build_one_stub <ppc_stub_plt_branch_r2off>):
Don't omit saving of r2 for ELFv2. Don't addi 2,2,0.
(ppc_size_one_stub <ppc_stub_plt_branch_r2off>): Adjust to suit.
With -mcmodel=medium we can't assume that a -R object doesn't use
toc-relative addressing if there's no toc. Lots of things are
accessed via r2, not just the toc/got section. Also, testing for
.opd is plain wrong for ELFv2.
* elf64-ppc.c (ppc64_elf_link_just_syms): Remove .got check.
Handle ELFv2.
The code for handling GOT references to ifunc symbols in static links
was missing.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_finish_dynamic_symbol):
Handle STT_GNU_IFUNC symbols correctly in static links.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-22.
* ld-aarch64/ifunc-22.d: New file.
* ld-aarch64/ifunc-22.s: Likewise.
The .got.plt header size was not being correctly taken into account
when calculating the offset for relocations against ifunc symbols.
bfd/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Ensure
PLT_INDEX is calculated using correct header size.
ld/testsuite/ChangeLog:
2013-11-26 Will Newton <will.newton@linaro.org>
* ld-aarch64/aarch64-elf.exp: Add ifunc-21 test.
* ld-aarch64/ifunc-21.d: New file.
* ld-aarch64/ifunc-21.s: Likewise.
output deterministic. time.h include is no longer needed.
* resres.c (res_append_resource): Likewise.
* pe-dll.c (fill_edata): Only use a real timestamp if
--insert-timestamp was used.
* emultempl/pe.em: Add the --insert-timestamp option.
* emultempl/pep.em: Likewise for 64bit.
* ld.texinfo: Document the --insert-timestamp option.
* libcoff-in.h: Add insert_timestamp flag to the pe_data struct.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Only use a real
timestamp if --insert-timestamp was used.
* elf32-arm.c (elf32_arm_populate_plt_entry): Return a boolean
value, TRUE for success, FALSE for failure.
Fail if attempting to create a PLT entry for a thumb only target.
(elf32_arm_final_link_relocate): Check result of calling
elf32_arm_populate_plt_entry.
(elf32_arm_finish_dynamic_symbol): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_howto_table): Use
R_AARCH64_TLS_DTPMOD64 instead of R_AARCH64_TLS_DTPMOD;
likewise for R_AARCH64_TLS_DTPREL and R_AARCH64_TLS_TPREL.
include/elf/
* aarch64.h: Define R_AARCH64_TLS_DTPMOD64,
R_AARCH64_TLS_DTPREL64 and R_AARCH64_TLS_TPREL64; guard
R_AARCH64_TLS_DTPMOD, R_AARCH64_TLS_DTPREL and
R_AARCH64_TLS_TPREL with RELOC_MACROS_GEN_FUNC.
Some places in elf64-ppc.c carelessly used SYMBOL_CALLS_LOCAL when
the proper test is SYMBOL_REFERENCES_LOCAL for cases where we take the
address of a protected symbol. This works OK for function descriptors
but not for ELFv2. Setting symbols to their global entry stub a
little earlier is to ensure _bfd_elf_hash_symbol allows such symbols
in .gnu.hash.
* elf64-ppc.c (ppc64_elf_edit_toc): Use SYMBOL_REFERENCES_LOCAL
here, not SYMBOL_CALLS_LOCAL.
(ppc64_elf_relocate_section): Likewise.
(size_global_entry_stubs): Set undefined symbols on their global
entry stubs here..
(build_global_entry_stubs): ..rather than here.
(ppc64_elf_build_stubs): Don't reset glink->size before calling
build_global_entry_stubs.
bfd/
* archures.c (bfd_mach_i386_nacl): Fix definition so it doesn't
collide with bfd_mach_l1om.
* bfd-in2.h: Regenerate.
* elf32-i386.c (elf32_i386_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-i386-nacl definition.
* elf64-x86-64.c (elf64_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf64-x86-64-nacl definition.
(elf32_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-x86-64-nacl definition.
binutils/
* objdump.c (dump_dwarf): Grok bfd_mach_x86_64_nacl and
bfd_mach_x64_32_nacl as equivalent to bfd_mach_x86_64.
ld/testsuite/
* ld-x86-64/x86-64.exp (mixed1, mixed2): Loosen error string match
so it accepts "i386:nacl" in place of "i386".
* ld-x86-64/ilp32-2.d: Likewise.
* ld-x86-64/ilp32-3.d: Likewise.
* ld-x86-64/lp64-2.d: Likewise.
* ld-x86-64/lp64-3.d: Likewise.
I can't see any good reason why anyone would want a dynamic .TOC., so
hide it in a way that is respected by _bfd_elf_export_symbol. This
also fixes an abort in relocate_section on not finding sreloc for .TOC.
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Make .TOC. defined and
hidden.
(ppc64_elf_set_toc): Adjust.
These shortcuts to dynamic sections in ppc_link_hash_table predated
their geneneric elf hash table equivalents.
* elf64-ppc.c (struct ppc_link_hash_table): Remove got, plt, relplt,
iplt, reliplt. Update all references to use elf.sgot, elf.splt,
elf.srelplt, elf.iplt and elf.irelplt.
Changing addis r2,r12,..; addi r2,r2,.. to lis r2,..; addi r2,r2..
in non-PIC executables has the benefit of removing a dependency on r12.
bfd/
* elf64-ppc.c (ppc64_elf_relocate_section): Edit global entry
prologue to non-PIC in non-PIC executables.
ld/testsuite/
* ld-powerpc/elfv2exe.d: Adjust for non-PIC global entry.
In a non-pic executable, ELFv2 like other targets, needs to emit a plt
entry even for non-call references to functions defined in shared
libraries, and define the function on the plt code.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Copy
pointer_equality_needed flag.
(ppc64_elf_check_relocs): For ELFv2 arrange to emit plt
entries for references to functions in shared libraries on
non-call relocs.
(readonly_dynrelocs): Split into function of the same name and..
(maybe_set_textrel): ..this new function. Update call.
(ppc64_elf_adjust_dynamic_symbol): Don't emit dynrelocs for
ELFv2 in most cases if we have a plt entry. Use new
readonly_relocs.
(allocate_dynrelocs): For ELFv2, don't allocate dynreloc space
for ifunc in static executables.
(size_global_entry_stubs): New function.
(ppc64_elf_size_dynamic_sections): Call size_global_entry_stubs.
Save end of glink branch table.
(ppc64_elf_hash_symbol): New function.
(build_global_entry_stubs): New function.
(ppc64_elf_build_stubs): Call build_global_entry_stubs. Adjust
glink sizing.
(ppc64_elf_relocate_section): Tidy plt16/32/64 reloc code.
(ppc64_elf_finish_dynamic_symbol): For ELFv2, adjust symbols
defined on plt code.
Every function has a nominal toc pointer value, even if it isn't used,
so set toc_off for every code section to the value used in that object
file. The thinking here was that if a code section didn't use the toc
it could use the previous object file's toc pointer value. It can,
but doing so is only a gain if functions in that section are called
mostly from previous objects sharing the same toc. We lose if the
functions in question are called mostly from the current object or
following objects, and it's a good bet they will probably mostly be
called from the current object.
* elf64-ppc.c (ppc64_elf_next_input_section): Always set toc_off
to value for object file.
bfd/
* elf-nacl.c (segment_eligible_for_headers): Drop requirement that
some section have SEC_HAS_CONTENTS set. It's not set for
.note.gnu.build-id, and a segment of only read-only SHT_NOBITS
sections is implausible and not really supportable anyway.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
The toc pointer save slot changes on ELFv2 from 40(1) to 24(1).
* elf64-ppc.c (STK_LR, STK_TOC, STK_LINKER): Define.
(savegpr0_tail, restgpr0_tail, savefpr0_tail, restfpr0_tail)
build_plt_stub, build_tls_get_addr_stub, ppc_build_one_stub,
ppc64_elf_relocate_section): Use new defines.
An ELFv2 PLT entry is simply the address of the target function rather
than three (or two) words to specify entry, toc and static chain. PLT
call stubs are correspondingly simpler and need no thread safety
barrier. The glink resolver stub and branch table also is simplified,
a change that could be applied to ELFv1 too, but isn't as yet.
* elf64-ppc.c (PLT_ENTRY_SIZE, PLT_INITIAL_ENTRY_SIZE): Add htab
parameter and adjust for ELFv2. Update all uses.
(PLT_CALL_STUB_SIZE): Delete.
(ppc64_elf_get_synthetic_symtab): Support new glink layout.
(allocate_dynrelocs): Likewise.
(plt_stub_size, build_plt_stub): Adjust for ELFv2.
(get_r2off): Return 0 for ELFv2 -R.
(ppc_build_one_stub, ppc_size_one_stub): Adjust for ELFv2.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_build_stubs): Add new ELFv2 glink.
This defines the ELF symbol st_other field used to encode the number
of instructions between a function "global entry" and its "local entry",
and adds support related to the local entry offset.
include/elf/
* ppc64.h (STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Define.
(ppc64_decode_local_entry, ppc64_encode_local_entry): New functions.
(PPC64_LOCAL_ENTRY_OFFSET, PPC64_SET_LOCAL_ENTRY_OFFSET): Define.
bfd/
* elf64-ppc.c (struct ppc_stub_hash_entry): Add "other".
(stub_hash_newfunc): Init new ppc_stub_hash_entry field, and one
we forgot, "plt_ent".
(ppc64_elf_add_symbol_hook): Check ELFv1 objects don't have
st_other bits only valid in ELFv2.
(ppc64_elf_merge_symbol_attribute): New function.
(ppc_type_of_stub): Add local_off param to test branch range.
(ppc_build_one_stub): Adjust destinations for ELFv2 locals.
(ppc_size_one_stub, toc_adjusting_stub_needed): Similarly.
(ppc64_elf_size_stubs): Pass local_off to ppc_type_of_stub.
Set "other" field.
(ppc64_elf_relocate_section): Adjust destination for ELFv2 local
calls.
gas/
* config/tc-ppc.c (md_pseudo_table): Add .localentry.
(ppc_elf_localentry): New function.
(ppc_force_relocation): Force relocs on all branches to localenty
symbols.
(ppc_fix_adjustable): Don't reduce such symbols to section+offset.
binutils/
* readelf.c (get_ppc64_symbol_other): New function.
(get_symbol_other): Use it for EM_PPC64.
Defines bits in ELF e_flags to differentiate ELFv2 objects from ELFv2,
adds .abiversion directive to explicitly choose the ABI, and code to
check and automatically select ABI.
include/elf/
* ppc64.h (EF_PPC64_ABI): Define.
bfd/
* elf64-ppc.c (abiversion, set_abiversion): New functions.
(ppc64_elf_get_synthetic_symtab): Handle ELFv2 objects without .opd.
(struct ppc_link_hash_table): Add opd_abi.
(ppc64_elf_check_relocs): Check no .opd with ELFv2.
(ppc64_elf_merge_private_bfd_data): New function.
(ppc64_elf_print_private_bfd_data): New function.
(ppc64_elf_tls_setup): Set htab->opd_abi.
(ppc64_elf_size_dynamic_sections): Don't emit OPD related dynamic
tags for ELFv2.
(ppc_build_one_stub): Use R_PPC64_IRELATIVE for ELFv2 ifunc.
(ppc64_elf_finish_dynamic_symbol): Likewise
binutils/
* readelf.c (get_machine_flags): Display ABI version for EM_PPC64.
gas/
* config/tc-ppc.c: Include elf/ppc64.h.
(ppc_abiversion): New variable.
(md_pseudo_table): Add .abiversion.
(ppc_elf_abiversion, ppc_elf_end): New functions.
* config/tc-ppc.h (md_end): Define.
This change is to support the new ELFv2 ABI, which uses the value in
r12 on function entry to calculate the got/toc pointer.
bfd/
* elf64-ppc.c (build_plt_stub): Switch stubs to use r11 as base
reg and r12 as destination.
(ppc_build_one_stub): Likewise.
(ppc64_elf_build_stubs): Likewise for glink.
ld/testsuite/
* ld-powerpc/tls.s: Add proper .opd entry for _start.
* ld-powerpc/tlstoc.s: Likewise.
* ld-powerpc/relbrlt.d: Update for changed stubs.
* ld-powerpc/tls.d: Update for changed stubs and _start .opd entry.
* ld-powerpc/tls.g: Likewise.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexe.g: Likewise.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.g: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstoc.d: Likewise.
* ld-powerpc/tlstoc.g: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
* ld-powerpc/tlstocso.r: Likewise.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
There's no real need to emit these always: They're needed only if we
indeed want to emit a localized symbol. Hence defer emission until we
at least did the basic early checks that would lead to no such symbol
getting emitted. This in particular avoids emitting such a symbol in
the majority of (if not all) "ld -r" cases.
I hope my set of cross build tests caught all the test cases needing
adjustment - please forgive if I missed a few.
bfd/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* elflink.c (struct elf_outext_info): Add field file_sym_done.
(bfd_elf_final_link): Initialize new field. Move fake STT_FILE
symbol emission from here ...
(elf_link_output_extsym): ... to here.
gas/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* gas/microblaze/relax_size.elf: Drop expectation of no longer
present STT_FILE symbol.
* gas/microblaze/relax_size2.elf: Likewise.
ld/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* ld-cris/tls-e-tpoffcomm1.d: Drop expectation of no longer
present STT_FILE symbol.
* ld-mmix/bpo-18.d: Likewise.
* ld-mmix/bpo-22.d: Likewise.
* ld-mmix/greg-6.d: Likewise.
* ld-mmix/greg-7.d: Likewise.
* ld-mmix/loc4.d: Likewise.
* ld-mmix/local1.d: Likewise.
* ld-mmix/local3.d: Likewise.
* ld-mmix/local5.d: Likewise.
* ld-mmix/local7.d: Likewise.
* ld-mmix/loct-1.d: Likewise.
* ld-sh/sh64/abi32.xd: Likewise.
* ld-sh/sh64/abi64.xd: Likewise.
* ld-sh/sh64/cmpct1.xd: Likewise.
* ld-sh/sh64/crange1.rd: Likewise.
* ld-sh/sh64/crange2.rd: Likewise.
* ld-sh/sh64/crange3-cmpct.rd: Likewise.
* ld-sh/sh64/crange3-media.rd: Likewise.
* ld-sh/sh64/crange3.rd: Likewise.
* ld-sh/sh64/crangerel1.rd: Likewise.
* ld-sh/sh64/crangerel2.rd: Likewise.
* ld-sh/sh64/mix1.xd: Likewise.
* ld-sh/sh64/mix2.xd: Likewise.
* ld-sh/sh64/shdl32.xd: Likewise.
* ld-sh/sh64/shdl64.xd: Likewise.
* dwarf2.c (lookup_address_in_line_info_table): Change return type
to be the range of addresses covered by the table.
(comp_unit_find_nearest_line): Likewise.
(find_line): Search all CUs. Select the one that matches and
covers the smallest address range.
* elfxx-mips.c (mips_elf_obj_tdata): Add abi_msa_bfd.
(mips_elf_merge_obj_attributes): Set abi_msa_bfd to the first object
file that has a Tag_GNU_MIPS_ABI_MSA attribute.
Merge Tag_GNU_MIPS_ABI_MSA attributes.
* elfxx-mips.c (mips_use_local_got_p): New function.
(mips_elf_count_got_symbols, mips_elf_calculate_relocation): Use it.
(_bfd_mips_elf_check_relocs): Set pointer_equality_needed for
GOT and absolute references.
ld/testsuite/
* ld-mips-elf/pic-and-nonpic-6-n32.ad,
ld-mips-elf/pic-and-nonpic-6-n32.dd,
ld-mips-elf/pic-and-nonpic-6-n32.gd,
ld-mips-elf/pic-and-nonpic-6-n32.nd,
ld-mips-elf/pic-and-nonpic-6-n32.rd,
ld-mips-elf/pic-and-nonpic-6-n64.ad,
ld-mips-elf/pic-and-nonpic-6-n64.dd,
ld-mips-elf/pic-and-nonpic-6-n64.gd,
ld-mips-elf/pic-and-nonpic-6-n64.nd,
ld-mips-elf/pic-and-nonpic-6-n64.rd,
ld-mips-elf/pic-and-nonpic-6-o32.ad,
ld-mips-elf/pic-and-nonpic-6-o32.dd,
ld-mips-elf/pic-and-nonpic-6-o32.gd,
ld-mips-elf/pic-and-nonpic-6-o32.nd,
ld-mips-elf/pic-and-nonpic-6-o32.rd: Fix symbol value of extf4.
No longer expect extf3, extf4 and extd2 to be in the global GOT.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Change type of
buildid_len to bfd_size_type.
gdb
* dwarf2read.c (dwarf2_get_dwz_file): Update for type change in
bfd_get_alt_debug_link_info.
This patch fixes gdb PR symtab/15597.
The bug is that the .gnu_debugaltlink section includes the build-id of
the alt file, but gdb does not use it.
This patch fixes the problem by changing gdb to do what it ought to
always have done: verify the build id of the file found using the
filename in .gnu_debugaltlink; and if that does not match, try to find
the correct debug file using the build-id and debug-file-directory.
This patch touches BFD. Previously, gdb had its own code for parsing
.gnu_debugaltlink; I changed it to use the BFD functions after those
were introduced. However, the BFD functions are incorrect -- they
assume that .gnu_debugaltlink is formatted like .gnu_debuglink.
However, it it is not. Instead, it consists of a file name followed
by the build-id -- no alignment, and the build-id is not a CRC.
Fixing this properly is a bit of a pain. But, because
separate_alt_debug_file_exists just has a FIXME for the build-id case,
I did not fix it properly. Instead I introduced a hack. This leaves
BFD working just as well as it did before my patch.
I'm willing to do something better here but I could use some guidance
as to what. It seems that the build-id code in BFD is largely punted
on.
FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of
BFD itself.
I moved the build-id logic out of elfread.c and into a new file.
This seemed cleanest to me.
Writing a test case was a bit of a pain. I added a couple new
features to the DWARF assembler to handle this.
Built and regtested on x86-64 Fedora 18.
* bfd-in2.h: Rebuild.
* opncls.c (bfd_get_alt_debug_link_info): Add buildid_len
parameter. Change type of buildid_out. Update.
(get_alt_debug_link_info_shim): New function.
(bfd_follow_gnu_debuglink): Use it.
* Makefile.in (SFILES): Add build-id.c.
(HFILES_NO_SRCDIR): Add build-id.h.
* build-id.c: New file, largely from elfread.c. Modified
most functions.
* build-id.h: New file.
* dwarf2read.c (dwarf2_get_dwz_file): Update for change to
bfd_get_alt_debug_link_info. Verify dwz file's build-id.
Search for dwz file using build-id.
* elfread.c (build_id_bfd_get, build_id_verify)
(build_id_to_debug_filename, find_separate_debug_file): Remove.
* gdb.dwarf2/dwzbuildid.exp: New file.
* lib/dwarf.exp (Dwarf::_section): Add "flags" and "type"
parameters.
(Dwarf::_defer_output): Change "section" parameter to
"section_spec"; update.
(Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New
procs.
stabs at end of .stab. Tidy variable usage. Don't drop the need
for a NULL function name stab if If N_FUN stab is ignored.
Ensure index entry count loop matches write loop.
* archures.c (bfd_mach_i386_nacl, bfd_mach_i386_i386_nacl): New macros.
(bfd_mach_x86_64_nacl, bfd_mach_x64_32_nacl): New macros.
* cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): New function.
(bfd_i386_nacl_arch): New variable.
(bfd_x86_64_nacl_arch, bfd_x64_32_nacl_arch): New variables.
(bfd_x64_32_arch_intel_syntax): Link them into the list.
* bfd-in2.h: Regenerate.
ld/
* emulparams/elf_i386_nacl.sh (ARCH): Set to i386:nacl.
* emulparams/elf_x86_64_nacl.sh (ARCH): Set to i386:x86-64:nacl.
* emulparams/elf32_x86_64_nacl.sh (ARCH): Set to i386:x64-32:nacl.
ld/testsuite/
* ld-x86-64/x86-64.exp (Mixed x86_64 and i386 input test 1):
Loosen string match to admit i386:x86-64*.
(Mixed x86_64 and i386 input test 2): Likewise.
* ld-x86-64/ilp32-2.d: Likewise.
* ld-x86-64/ilp32-3.d: Likewise.
* ld-x86-64/lp64-2.d: Likewise.
* ld-x86-64/lp64-3.d: Likewise.
* ld-x86-64/ia32-2.d: Likewise, and i386.* too.
* ld-x86-64/ia32-3.d: Likewise.
* elf-nacl.c (nacl_modify_segment_map): Fix logic reordering the
elf_segment_map list. If an executable segment is page-aligned
but does not end with a full page, then append a fake section into
the segment map entry that pads out the page.
(nacl_final_write_processing): New function. Write the code fill
laid out in nacl_modify_segment_map.
* elf-nacl.h: Declare it.
* elf32-arm.c (elf32_arm_nacl_final_write_processing): New function.
(elf_backend_final_write_processing): Define it for NaCl backend.
* elf32-i386.c (elf_backend_final_write_processing): Likewise.
* elf64-x86-64.c (elf_backend_final_write_processing): Likewise.
* elf-nacl.c (segment_eligible_for_headers): Rename MAXPAGESIZE
parameter to MINPAGESIZE.
(nacl_modify_segment_map): Use minpagesize instead of maxpagesize.
* elf32-arm.c (ELF_MINPAGESIZE, ELF_COMMONPAGESIZE): Set to
0x10000 for NaCl targets.
ld/testsuite/
* ld-x86-64/ilp32-4-nacl.d: Loosen .shstrtab line regexp to match
any file offset.
* ld-x86-64/tlsbin-nacl.rd: Update expected code segment PT_LOAD.
* ld-x86-64/tlsbindesc-nacl.rd: Likewise.
* ld-scripts/rgn-at3.d: XFAIL for *-*-nacl* targets.
* ld-scripts/rgn-over8-ok.d: Likewise.
set GOT's entry size if there is no ELF section data.
* elf64-s390.c (elf_s390_finish_dynamic_sections): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_finish_dynamic_sections):
Likewise.
* coff-rs6000.c (_bfd_xcoff_sizeof_headers): Also count
.ovrflo sections.
* coffcode.h (coff_compute_section_file_positions): Force
match between file offset and vma offset.
* elf32-arm.c (elf32_arm_final_link_relocate): Use origin of output
segment containing the relocating symbol instead of assuming 0 for
sb group relocations.
* ld-arm/group-relocs-ldr-bad.s: Redefine bar into foo section
beyond 16 bit offset width.
* ld-arm/group-relocs-ldrs-bad.s: Likewise.
* ld-arm/group-relocs-ldr-bad.d: Adjust expected result.
* ld-arm/group-relocs-ldrs-bad.d: Likewise.
* ld-arm/group-relocs.s: Add comments. Move symbols used for sb
group relocations into .data section. Drop section zero. Use pc/r0
as base register when pc/sb group relocations are used.
* ld-arm/group-relocs.d: Adjust expected result.
* ld-arm/group-relocs-alu-bad-2.d: New test for sb group relocation.
* ld-arm/group-relocs-ldc-bad-2.d: Likewise.
* ld-arm/group-relocs-ldr-bad-2.d: New test for pc group relocation.
* ld-arm/group-relocs-ldrs-bad-2.d: Likewise.
* ld-arm/unresolved-2.d: Add sb relocation failure test.
* ld-arm/group-relocs-alu-bad-2.s: New test source.
* ld-arm/group-relocs-ldr-bad-2.s: Likewise.
* ld-arm/group-relocs-ldrs-bad-2.s: Likewise.
* ld-arm/group-relocs-ldc-bad-2.s: Likewise.
* ld-arm/unresolved-2.s: Likewise.
* ld-arm/arm-elf.exp: For group-relocs, drop section zero start
definition. Run the new tests.
* elf32-vax.c (elf_vax_check_relocs) <R_VAX_GOT32, R_VAX_PLT32>:
Don't check symbol visibility here. Remove a check already
asserted for.
(elf_vax_instantiate_got_entries): Use SYMBOL_REFERENCES_LOCAL
instead of individual checks.
(elf_vax_relocate_section) <R_VAX_GOT32, R_VAX_PLT32>: Only
check the offset to decide if produce a GOT or PLT entry.
Remove redundant assertions. Remove code to produce GOT entries
for local symbols. Remove a duplicate comment and add a comment
on GOT relocations.
(elf_vax_finish_dynamic_symbol): Remove code to produce RELATIVE
dynamic relocs.
ld/testsuite/
* ld-vax-elf/got-local-exe.xd: New test.
* ld-vax-elf/got-local-lib.xd: New test.
* ld-vax-elf/got-local-aux.s: New test source.
* ld-vax-elf/got-local-def.s: New test source.
* ld-vax-elf/got-local-ref.s: New test source.
* ld-vax-elf/vax-elf.exp: Run the new tests.
(elf_vax_always_size_sections): Likewise.
(elf_vax_size_dynamic_sections): Remove code moved to
elf_vax_always_size_sections. Make comment on
elf_vax_instantiate_got_entries match reality.
(elf_vax_instantiate_got_entries): Assert that rather than check
if dynobj is null. Don't check for dynamic_sections_created.
Make function description match reality.
(elf_backend_always_size_sections): New macro.
thumb only targets.
(elf32_arm_final_link_relocate): Likewise.
* ld-arm/thumb-b-lks-sym.d: Updated to be more flexible.
* ld-arm/thumb-bl-lks-sym.d: Likewise.
(elf32_arm_stub_long_branch_arm_nacl_pic): New variable.
(arm_build_one_stub): Increase MAXRELOCS to 3.
(arm_type_of_stub): Use them if GLOBALS->nacl_p.
(struct elf32_arm_link_hash_table): Give add_stub_section member's
pointee type a third argument.
(elf32_arm_create_or_find_stub_sec): Update caller.
(elf32_arm_size_stubs): Update argument type.
* bfd-in.h (elf32_arm_size_stubs): Update decl.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* emultempl/armelf.em (elf32_arm_add_stub_section): Take third
argument ALIGNMENT_POWER, use it instead of constant 3.
* ld-arm/farcall-arm-nacl.d: New file.
* ld-arm/farcall-arm-nacl-pic.d: New file.
* ld-arm/farcall-data-nacl.d: New file.
* ld-arm/arm-elf.exp (armeabitests_common): Add extra element to
"action" lists for those cases to use a different dump file for NaCl
targets.
Massage $armeabitests_common to drop the extra element or the one
before it, depending on [istarget "arm*-*-nacl*"].
* ld-arm/arm-elf.exp (armelftests_common): Move all "Cortex-A8
erratum fix", Thumb-only and interworking cases to ...
(armelftests_nonacl): ... here.
(armeabitests_common): Move all "erratum 760522 fix", Thumb-only
and interworking cases to ...
(armeabitests_nonacl): ... here.
* mips.h (EF_MIPS_NAN2008): New macro.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Handle
EF_MIPS_NAN2008.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
binutils/
* readelf.c (get_machine_flags): Handle EF_MIPS_NAN2008.
gas/
* config/tc-mips.c (mips_flag_nan2008): New variable.
(options): Add OPTION_NAN enum value.
(md_longopts): Handle it.
(md_parse_option): Likewise.
(s_nan): New function.
(mips_elf_final_processing): Handle EF_MIPS_NAN2008.
(md_show_usage): Add -mnan.
* doc/as.texinfo (Overview): Add -mnan.
* doc/c-mips.texi (MIPS Opts): Document -mnan.
(MIPS NaN Encodings): New node. Document .nan directive.
(MIPS-Dependent): List the new node.
gas/testsuite/
* gas/mips/nan-2008-1.d: New test.
* gas/mips/nan-2008-2.d: New test.
* gas/mips/nan-2008-3.d: New test.
* gas/mips/nan-2008-4.d: New test.
* gas/mips/nan-legacy-1.d: New test.
* gas/mips/nan-legacy-2.d: New test.
* gas/mips/nan-legacy-3.d: New test.
* gas/mips/nan-legacy-4.d: New test.
* gas/mips/nan-legacy-5.d: New test.
* gas/mips/nan-error-1.l: New list test.
* gas/mips/nan-error-2.l: New list test.
* gas/mips/nan-2008-override.s: New test source.
* gas/mips/nan-2008.s: New test source.
* gas/mips/nan-legacy-override.s: New test source.
* gas/mips/nan-legacy.s: New test source.
* gas/mips/nan-error-1.s: New test source.
* gas/mips/nan-error-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/nan-2008.d: New test.
* ld-mips-elf/nan-legacy.d: New test.
* ld-mips-elf/nan-mixed-1.d: New test.
* ld-mips-elf/nan-mixed-2.d: New test.
* ld-mips-elf/nan-2008.s: New test source.
* ld-mips-elf/nan-legacy.s: New test source.
* hosts/alphavms.h: Include config.h and ansidecl.h, remove useless
macros.
* configure.com: Adjust to match changes in configure.
* makefile.vms (OBJS): Update list.
opcodes/
* s390-opc.c (J12_12, J24_24): New macros.
(INSTR_MII_UPI): Rename to INSTR_MII_UPP.
(MASK_MII_UPI): Rename to MASK_MII_UPP.
* s390-opc.txt: Rename MII_UPI to MII_UPP for bprp instruction.
include/elf/
* s390.h: Add new relocs R_390_PC12DBL, R_390_PLT12DBL,
R_390_PC24DBL, and R_390_PLT24DBL.
gas/testsuite/
* gas/s390/zarch-zEC12.s: Change bprp second operand and add
variants requiring relocations.
* gas/s390/zarch-zEC12.d: Likewise.
gas/
* config/tc-s390.c (md_gather_operands, md_apply_fix): Support new
relocs.
bfd/
* elf32-s390.c: Add new relocation definitions R_390_PC12DBL,
R_390_PLT12DBL, R_390_PC24DBL, and R_390_PLT24DBL.
(elf_s390_reloc_type_lookup, elf_s390_check_relocs)
(elf_s390_gc_sweep_hook, elf_s390_relocate_section): Support new
relocations.
* elf64-s390.c: See elf32-s390.c
* bfd-in2.h: Add new relocs to enum bfd_reloc_code_real.
* libbfd.h: Add new reloc strings.
* elf64-ppc.c (struct ppc_stub_hash_entry): Delete "addend".
(ppc64_elf_size_stubs): Don't set "addend".
(ppc64_elf_relocate_section): Don't allow calls via
toc-adjusting stubs without a following nop even in an
executable, except for self-calls and both libc_start_main
and .libc_start_main.
gold/
* powerpc.cc (Target_powerpc::Relocate::relocate): Update self-call
comment.
* elf64-ppc.c (ppc64_elf_relocate_section): Set "relocation" for
.TOC. after relocatable check.
gas/
* config/tc-ppc.c (ppc_elf_adjust_symtab): Don't make .TOC. weak.
* elf64-ppc.h (ppc64_elf_toc): Delete.
(ppc64_elf_set_toc): Declare.
* elf64-ppc.c (ppc64_elf_toc_reloc): Replace call to ppc64_elf_toc
with call the ppc64_elf_set_toc.
(ppc64_elf_toc_ha_reloc, ppc64_elf_toc64_reloc): Likewise.
(ppc64_elf_start_multitoc_partition): Likewise.
(struct ppc_link_hash_table): Delete dot_toc_dot. Replace all uses
with elf.hgot.
(ppc64_elf_process_dot_syms): Don't make a fake function descriptor
for ".TOC.".
(ppc64_elf_check_relocs): Mark sections with a reference to .TOC.
as needing a toc pointer.
(ppc64_elf_size_stubs): Don't set dot_toc_dot here.
(ppc64_elf_set_toc): Rename from ppc64_elf_toc. Add info param.
Set elf.hgot value.
ld/
* emultempl/ppc64elf.em: (ppc_layout_sections_again): Call
ppc64_elf_set_toc rather than ppc64_elf_toc/_bfd_set_gp_value.
(gld${EMULATION_NAME}_after_allocation): Likewise.
bfd/
* Makefile.am (elf32-aarch64.c): Add a #line cpp directive at the
beginning of the generated file.
(elf64-aarch64.c): Likewise.
* Makefile.in: Re-generated.
and gas.
bfd/
* Makefile.am (BFD64_BACKENDS): Add elf32-aarch64.lo.
(BUILD_CFILES): Add elf32-aarch64.c.
(elf32-aarch64.c): New rule for generating from elfnn-aarch64.c.
* Makefile.in: Re-generated.
* archures.c (bfd_mach_aarch64_ilp32): New define.
* bfd-in.h (bfd_elf32_aarch64_init_maps): New declaration.
(bfd_elf32_aarch64_set_options): Ditto.
(elf32_aarch64_setup_section_lists): Ditto.
(elf32_aarch64_next_input_section): Ditto.
(elf32_aarch64_size_stubs): Ditto.
(elf32_aarch64_build_stubs): Ditto.
* bfd-in2.h: Re-generated.
* config.bfd (aarch64-*-elf): Add bfd_elf32_littleaarch64_vec
and bfd_elf32_bigaarch64_vec.
(aarch64-*-linux*): Likewise.
(aarch64_be-*-elf): Likewise.
(aarch64_be-*-linux*): Likewise.
* configure.in (bfd_elf32_bigaarch64_vec)
(bfd_elf32_littleaarch64_vec): New.
* configure: Re-generated.
* cpu-aarch64.c (compatible): Don't allow mixing ilp32 objects with
lp64 ones.
(bfd_aarch64_arch_ilp32): New.
(bfd_aarch64_arch): Link to bfd_aarch64_arch_ilp32.
* elfnn-aarch64.c (ARCH_SIZE): New define.
(AARCH64_R, AARCH64_R_STR, LOG_FILE_ALIGN): New defines.
(GOT_ENTRY_SIZE): Re-define as (ARCH_SIZE / 8).
(elf64_aarch64_*): Rename to elfNN_aarch64_*.
(ELF64_R_*): Rename to ELFNN_R_*.
Plus other paramaterization.
* targets.c (bfd_elf32_bigaarch64_vec, bfd_elf32_littleaarch64_vec):
New declarations.
(_bfd_target_vector): Add bfd_elf32_bigaarch64_vec and
bfd_elf32_littleaarch64_vec.
gas/
* config/tc-aarch64.c (ilp32_p): New static variable.
(elf64_aarch64_target_format): Return the target according to the
value of 'ilp32_p'.
(md_begin): Determine 'mach' according to the value of 'ilp32_p'.
(aarch64_opts): Add support for options '-milp32' and '-mlp64'.
(aarch64_dwarf2_addr_size): New function.
* config/tc-aarch64.h (aarch64_dwarf2_addr_size): New declaration.
(DWARF2_ADDR_SIZE): New define.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Add eaarch64elf32.c.
(eaarch64elf32.c): New dependency and rule.
* Makefile.in: Re-generated.
* configure.tgt (aarch64-*-elf): Add aarch64elf32.
(aarch64_be-*-elf, aarch64_be-*-linux*, aarch64-*-linux*): Likewise.
* emulparams/aarch64elf32.sh: New file.
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
prototype.
* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
(bfd_elf32_get_synthetic_symtab): New macro.
* elfxx-mips.c (plt_entry): New structure.
(mips_elf_link_hash_entry): Add use_plt_entry member.
(mips_elf_link_hash_table): Rename plt_entry_size member to
plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset,
plt_comp_offset, plt_got_index entries and plt_header_is_comp
members.
(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
(STUB_LI16S_MICROMIPS): Likewise.
(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(micromips_o32_exec_plt0_entry): New variable.
(mips16_o32_exec_plt_entry): Likewise.
(micromips_o32_exec_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
(mips_elf_output_extsym): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_gotplt_index): Likewise. Remove the VxWorks
restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_elf_count_got_symbols): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
entries.
(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
here.
(mips_elf_make_plt_record): New function.
(_bfd_mips_elf_check_relocs): Update comment. Record occurences
of JAL relocations that might need a PLT entry.
(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Set individual
PLT entry sizes here. Handle MIPS16/microMIPS PLT entries.
Don't set the symbol's value in the symbol table for PLT
references here. Don't set the PLT or PLT GOT section sizes
here.
(mips_elf_estimate_stub_size): Handle microMIPS stubs.
(mips_elf_allocate_lazy_stub): Likewise.
(mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_
magic symbol.
(mips_elf_set_plt_sym_value): New function.
(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
PLT and PLT GOT section sizes here. Set the symbol values in
the symbol table for PLT references here. Handle microMIPS
annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
(_bfd_mips_elf_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Handle
MIPS16/microMIPS PLT entries. Handle microMIPS stubs.
(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Use
MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_finish_exec_plt): Handle microMIPS PLT. Return status.
(_bfd_mips_elf_finish_dynamic_sections): Handle result from
mips_finish_exec_plt.
(_bfd_mips_elf_link_hash_table_create): Update to use
gotplt_union's plist member rather than offset.
(_bfd_mips_elf_get_synthetic_symtab): New function.
include/elf/
* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
(ELF_ST_SET_MIPS_PLT): Likewise.
gdb/
* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
microMIPS synthetic symbols.
ld/
* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
as close to .plt as possible.
* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
$PLT_NEXT_DATA variables.
ld/testsuite/
* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
magic symbol.
* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
* ld-mips-elf/tlslib-o32.d: Likewise.
opcodes/
* mips-dis.c (is_mips16_plt_tail): New function.
(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
word.
(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
* Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Move MIPS ELF
files to...
(BFD64_BACKENDS, BFD64_BACKENDS_CFILES): ...here.
* Makefile.in: Regenerate.
* config.bfd: Enclose all MIPS ELF targets in #ifdef BFD64.
Set want64 to true for them at the end.
* targets.c (_bfd_target_vector): Protect MIPS ELF targets with
#ifdef BFD64.
gas/
* config/tc-mips.c: Assert that offsetT and valueT are at least
8 bytes in size.
(GPR_SMIN, GPR_SMAX): New macros.
(macro, mips_ip): Remove code for 4-byte valueT and offsetT.
ld/
* Makefile.am (ALL_EMULATION_SOURCES): Move MIPS ELF emulations to...
(ALL_64_EMULATION_SOURCES): ...here.
* Makefile.in: Regenerate.
* elf64-aarch64.c (elf64_aarch64_final_link_relocate): Call
aarch64_resolve_relocation and bfd_elf_aarch64_put_addend to
handle the relocations of R_AARCH64_JUMP26, R_AARCH64_CALL26,
R_AARCH64_LD64_GOT_LO12_NC, R_AARCH64_ADR_GOT_PAGE and
R_AARCH64_GOT_LD_PREL19.
ld/testsuite/
* ld-aarch64/aarch64-elf.exp: Add 'ifunc-7c'.
* ld-aarch64/ifunc-7c.d: New test.
* elf32-arm.c (allocate_dynrelocs_for_symbol): Transform
ST_BRANCH_TO_ARM into ST_BRANCH_TO_THUMB if the target only
supports thumb instructions.
PR ld/15302
* ld-arm/branch-lks-sym.ld: New script.
* ld-arm/thumb-b-lks-sym.s: New test.
* ld-arm/thumb-b-lks-sym.d: Expected disassembly.
* ld-arm/thumb-bl-lks-sym.s: New test.
* ld-arm/thumb-bl-lks-sym.d: Expected disassembly.
* ld-arm/arm-elf.exp: Run the new tests.
Fix incorrect usage of ELF32_R_SYM introduced in ifunc changes.
bfd/ChangeLog:
2013-06-11 Will Newton <will.newton@linaro.org>
* elf64-aarch64.c (elf_aarch64_get_local_sym_hash): Use
ELF64_R_SYM instead of ELF32_R_SYM.
alternate debug info source.
(dwarf_debug_sections): Add entries for alternate .debug_str and
.debug_info sections.
(dwarf_debug_section_enum): Likewise.
(read_alt_indirect_string): New function. Handles a
DW_FORM_GNU_strp_alt attribute.
(read_alt_indirect_ref): New function. Handles a
DW_FORM_GNU_ref_alt attribute.
(read_attribute_value): Process DW_FORM_GNU_ref_alt and
DW_FORM_GNU_strp_alt.
(find_abstract_instance_name): Handle DW_FORM_GNU_ref_alt
attributes.
(_bfd_dwarf2_cleanup_debug_info): Free alternate debug info
sources.
* opncls.c (GNU_DEBUGALTLINK): Define.
(bfd_get_alt_debug_link_info): New function.
(separate_alt_debug_file_exists): New function.
(find_separate_debug_file): Add parameters for fetch and check
functions.
(bfd_follow_gnu_debugaltlink): New function.
* bfd-in2.h: Regenerate.
The current hard coded limit of open files in bfd/cache.c is 10. This
is pretty low these days. Binaries are often linked against much more
than 10 files (and sometimes against more than 100 shared libraries).
When debugging with GDB some files are opened and closed multiple
times because of this low limit. If possible make the BFD cache file
limit depend on the actual open file limit of the process so more BFD
files can be open at the same time.
* cache.c (BFD_CACHE_MAX_OPEN): Remove define.
(max_open_files): New static int initialized to zero.
(bfd_cache_max_open): New static function to set and return
max_open_files.
(bfd_cache_init): Use bfd_cache_max_open.
(bfd_open_file): Likewise.
* configure.in (AC_CHECK_HEADERS): Add sys/resource.h.
(AC_CHECK_FUNCS): Add getrlimit.
* configure: Regenerated.
* config.in: Likewise.
* sysdep.h: Check and include sys/resource.h for getrlimit.
The relocs_copied member is never assigned a non-NULL value, so
this code does not appear to be used.
bfd/ChangeLog:
2013-05-20 Will Newton <will.newton@linaro.org>
* elf64-aarch64.c (elf64_aarch64_link_hash_entry): Remove
relocs_copied member.
(elf64_aarch64_link_hash_newfunc): Remove initialization of
relocs_copied member.
(elf64_aarch64_copy_indirect_symbol): Remove code to copy
relocs_copied member.
The .except, .loader and .typchk are not mapped to memory,
so do not set their SEC_ALLOC flag.
bfd/ChangeLog:
* coffcode.h (styp_to_sec_flags) [RS6000COFF_C]: Add handling
of STYP_EXCEPT, STYP_LOADER and STYP_TYPCHK sections.
ld/testsuite/ChangeLog:
* ld-powerpc/aix-core-sec-1.hd, ld-powerpc/aix-core-sec-2.hd,
ld-powerpc/aix-core-sec-3.hd: Adjust expected section flags
for section .loader.
Currently, bfd does not compile with -Wunused-value because
the following code:
val = putc ('\n', f);
gets expanded into some code that triggers a warning:
warning: value computed is not used [-Wunused-value]
This is because putc is implemented as a macro...
>#define putc(__x, __p) (((!((__p)->_flag & 0xC000)) && \
> ((__p)->_flag = ((__p)->_flag & 0x3FFF) | 0x8000)),\
> (--(__p)->_cnt < 0 ? \
> __flsbuf((unsigned char) (__x), (__p)) : \
> (int) (*(__p)->_ptr++ = (unsigned char) (__x))))
It's the first part, before the coma operator, which triggers
the unused-value warning.
This patch fixes the issue by simply avoiding the macro and using
fputc instead.
bfd/ChangeLog:
* bfd.c (_bfd_default_error_handler): Replace use of putc
by fputc. Add comment explaining why.
bfd/ChangeLog:
2013-05-07 Will Newton <will.newton@linaro.org>
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Add a
plt_header_size argument for ports where it differs from
plt_entry_size.
* elf-bfd.h: Likewise.
* elf32-i386.c: Pass plt_header_size to
_bfd_elf_allocate_ifunc_dyn_relocs.
* elf64-x86-64.c: Likewise.
hashes around loading as-needed library. Zero them on allocation,
and restore to initial all-zero state if library not needed.
Arrange to reuse hashes if we load library again later.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
This patch enables x32 for x86_64-*-elf* for embedded target and disables
rex tests since it uses '/' as prefix separator which is `\' for
x86_64-*-elf*.
bfd/
* config.bfd (targ_selvecs): Add bfd_elf32_x86_64_vec for
x86_64-*-elf*.
gas/testsuite/
* gas/i386/rex.d: Skip x86_64-*-elf*.
* gas/i386/ilp32/rex.d: Likewise.
ld/
* configure.tgt (targ_extra_emuls): Adds elf32_x86_64 for
x86_64-*-elf*.
(targ_extra_libpath): Likewise.
(tdir_elf_i386): Replace x86_64 with i386 for x86_64-*-elf*.
* elf32-arm.c (elf32_arm_allocate_plt_entry): If HTAB->nacl_p,
allocate space for PLT header even if IS_IPLT_ENTRY.
(arm_nacl_put_plt0): New function, broken out of ...
(elf32_arm_finish_dynamic_sections): ... here. Call it.
If HTAB->nacl_p, set up the PLT header in .iplt too.
(elf32_arm_output_arch_local_syms): If HTAB->nacl_p, write
a mapping symbol for the start of .iplt too.
