On powerpc64, qSymbol query may require gdb to read a function
descriptor, sending a vFile packet to gdbserver. Thus, we need
to handle 'v' packet in look_up_one_symbol.
vFile replies may be quite long, and require reallocating own_buf.
Since handle_v_requests assumes the buffer is the static global own_buf
from server.c and reallocates it, we need to make own_buf global and
use it from look_up_one_symbol instead of using our own auto variable.
I've also done the same change in relocate_instruction, just in case.
On gdb side, in remote_check_symbols, rs->buf may be clobbered by vFile
handling, yet we need its contents for the reply (the symbol name is
stored there). Allocate a new buffer instead.
This broke fast tracepoints on powerpc64, due to errors in reading IPA
symbols.
gdb/ChangeLog:
* remote.c (remote_check_symbols): Allocate own buffer for reply.
gdbserver/ChangeLog:
* remote-utils.c (look_up_one_symbol): Remove own_buf, handle 'v'
packets.
(relocate_instruction): Remove own_buf.
* server.c (own_buf): Make global.
(handle_v_requests): Make global.
* server.h (own_buf): New declaration.
(handle_v_requests): New prototype.
This adds a new QCatchSyscalls packet to enable 'catch syscall', and new
stop reasons "syscall_entry" and "syscall_return" for those events. It
is currently only supported on Linux x86 and x86_64.
gdb/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
syscall_entry and syscall_return stop reasons. Mention GDB
support for remote catch syscall.
* remote.c (PACKET_QCatchSyscalls): New enum.
(remote_set_syscall_catchpoint): New function.
(remote_protocol_features): New element for QCatchSyscalls.
(remote_parse_stop_reply): Parse syscall_entry/return stops.
(init_remote_ops): Install remote_set_syscall_catchpoint.
(_initialize_remote): Config QCatchSyscalls.
* linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.
gdb/doc/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
(Stop Reply Packets): List the syscall entry and return stop reasons.
(General Query Packets): Describe QCatchSyscalls, and add it to the
table and the detailed list of stub features.
gdb/gdbserver/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* inferiors.h: Include "gdb_vecs.h".
(struct process_info): Add syscalls_to_catch.
* inferiors.c (remove_process): Free syscalls_to_catch.
* remote-utils.c (prepare_resume_reply): Report syscall_entry and
syscall_return stops.
* server.h (UNKNOWN_SYSCALL, ANY_SYSCALL): Define.
* server.c (handle_general_set): Handle QCatchSyscalls.
(handle_query): Report support for QCatchSyscalls.
* target.h (struct target_ops): Add supports_catch_syscall.
(target_supports_catch_syscall): New macro.
* linux-low.h (struct linux_target_ops): Add get_syscall_trapinfo.
(struct lwp_info): Add syscall_state.
* linux-low.c (handle_extended_wait): Mark syscall_state as an entry.
Maintain syscall_state and syscalls_to_catch across exec.
(get_syscall_trapinfo): New function, proxy to the_low_target.
(linux_low_ptrace_options): Enable PTRACE_O_TRACESYSGOOD.
(linux_low_filter_event): Toggle syscall_state entry/return for
syscall traps, and set it ignored for all others.
(gdb_catching_syscalls_p): New function.
(gdb_catch_this_syscall_p): New function.
(linux_wait_1): Handle SYSCALL_SIGTRAP.
(linux_resume_one_lwp_throw): Add PTRACE_SYSCALL possibility.
(linux_supports_catch_syscall): New function.
(linux_target_ops): Install it.
* linux-x86-low.c (x86_get_syscall_trapinfo): New function.
(the_low_target): Install it.
gdb/testsuite/ChangeLog:
2016-01-12 Josh Stone <jistone@redhat.com>
Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/catch-syscall.c (do_execve): New variable.
(main): Conditionally trigger an execve.
* gdb.base/catch-syscall.exp: Enable testing for remote targets.
(test_catch_syscall_execve): New, check entry/return across execve.
(do_syscall_tests): Call test_catch_syscall_execve.
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
In commit 6085d6f6, Z0 packet is disabled in aarch64 GDBserver if
the inferior is 32-bit or there may be multiple inferiors, because
Z0 packet isn't supported for arm then. Recently, Z0 packet
is supported in arm target, so we don't have such limitation in
aarch64 GDBserver, that is to say, aarch64 GDBserver can use Z0
packet in multi-arch/multi-inferior debugging when the inferior's
arch is arm.
Part of this patch is to revert 6085d6f6, and the rest of the patch
is to move some breakpoint related arm_* functions into
linux-aarch32-low.c in order to share them between arm and aarch64.
This patch is regression tested on aarch64-linux for debugging both
aarch64 programs and arm programs respectively.
gdb/gdbserver:
2015-12-07 Yao Qi <yao.qi@linaro.org>
* configure.srv: Append arm.o to srv_tgtobj for
aarch64*-*-linux* target.
* linux-aarch32-low.c (arm_abi_breakpoint): New macro. Moved
from linux-arm-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode, arm_breakpoint_at): Likewise.
(arm_breakpoint_kinds): Likewise.
(arm_breakpoint_kind_from_pc): Likewise.
(arm_sw_breakpoint_from_kind): Likewise.
(arm_breakpoint_kind_from_current_state): Likewise.
* linux-aarch32-low.h (arm_breakpoint_kind_from_pc): Declare.
(arm_sw_breakpoint_from_kind): Declare.
(arm_breakpoint_kind_from_current_state): Declare.
(arm_breakpoint_at): Declare.
* linux-aarch64-low.c (aarch64_sw_breakpoint_from_kind): Call
arm_sw_breakpoint_from_kind if process is 32-bit.
(aarch64_breakpoint_kind_from_pc): New function.
(aarch64_breakpoint_kind_from_current_state): New function.
(the_low_target): Initialize fields breakpoint_kind_from_pc
and breakpoint_kind_from_current_state.
* linux-arm-low.c (arm_breakpoint_kinds): Move to
linux-aarch32-low.c.
(arm_abi_breakpoint, arm_eabi_breakpoint): Likewise.
(arm_breakpoint, arm_breakpoint_len): Likewise.
(thumb_breakpoint, thumb_breakpoint_len): Likewise.
(thumb2_breakpoint, thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Likewise.
(arm_breakpoint_at): Likewise.
(arm_breakpoint_kind_from_pc): Likewise.
(arm_sw_breakpoint_from_kind): Likewise.
(arm_breakpoint_kind_from_current_state): Likewise.
Revert:
2015-08-04 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_supports_z_point_type): Return
0 for Z_PACKET_SW_BP if it may be used in multi-arch debugging.
* server.c (extended_protocol): Remove "static".
* server.h (extended_protocol): Declare it.
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
This patch implements support for exec events on extended-remote Linux
targets. Follow-exec-mode and rerun behave as expected. Catchpoints and
test updates are implemented in subsequent patches.
This patch was derived from a patch posted last October:
https://sourceware.org/ml/gdb-patches/2014-10/msg00877.html.
It was originally based on some work done by Luis Machado in 2013.
IMPLEMENTATION
----------------
Exec events are enabled via ptrace options.
When an exec event is detected by gdbserver, the existing process
data, along with all its associated lwp and thread data, is deleted
and replaced by data for a new single-threaded process. The new
process data is initialized with the appropriate parts of the state
of the execing process. This approach takes care of several potential
pitfalls, including:
* deleting the data for an execing non-leader thread before any
wait/sigsuspend occurs
* correctly initializing the architecture of the execed process
We then report the exec event using a new RSP stop reason, "exec".
When GDB receives an "exec" event, it saves the status in the event
structure's target_waitstatus field, like what is done for remote fork
events. Because the original and execed programs may have different
architectures, we skip parsing the section of the stop reply packet
that contains register data. The register data will be retrieved
later after the inferior's architecture has been set up by
infrun.c:follow_exec.
At that point the exec event is handled by the existing event handling
in GDB. However, a few changes were necessary so that
infrun.c:follow_exec could accommodate the remote target.
* Where follow-exec-mode "new" is handled, we now call
add_inferior_with_spaces instead of add_inferior with separate calls
to set up the program and address spaces. The motivation for this
is that add_inferior_with_spaces also sets up the initial architecture
for the inferior, which is needed later by target_find_description
when it calls target_gdbarch.
* We call a new target function, target_follow_exec. This function
allows us to store the execd_pathname in the inferior, instead of
using the static string remote_exec_file from remote.c. The static
string didn't work for follow-exec-mode "new", since once you switched
to the execed program, the original remote exec-file was lost. The
execd_pathname is now stored in the inferior's program space as a
REGISTRY field. All of the requisite mechanisms for this are
defined in remote.c.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_mourn): Static declaration.
(linux_arch_setup): Move in front of
handle_extended_wait.
(linux_arch_setup_thread): New function.
(handle_extended_wait): Handle exec events. Call
linux_arch_setup_thread. Make event_lwp argument a
pointer-to-a-pointer.
(check_zombie_leaders): Do not check stopped threads.
(linux_low_ptrace_options): Add PTRACE_O_TRACEEXEC.
(linux_low_filter_event): Add lwp and thread for exec'ing
non-leader thread if leader thread has been deleted.
Refactor code into linux_arch_setup_thread and call it.
Pass child lwp pointer by reference to handle_extended_wait.
(linux_wait_for_event_filtered): Update comment.
(linux_wait_1): Prevent clobbering exec event status.
(linux_supports_exec_events): New function.
(linux_target_ops) <supports_exec_events>: Initialize new member.
* lynx-low.c (lynx_target_ops) <supports_exec_events>: Initialize
new member.
* remote-utils.c (prepare_resume_reply): New stop reason 'exec'.
* server.c (report_exec_events): New global variable.
(handle_query): Handle qSupported query for exec-events feature.
(captured_main): Initialize report_exec_events.
* server.h (report_exec_events): Declare new global variable.
* target.h (struct target_ops) <supports_exec_events>: New
member.
(target_supports_exec_events): New macro.
* win32-low.c (win32_target_ops) <supports_exec_events>:
Initialize new member.
gdb/ChangeLog:
* infrun.c (follow_exec): Use process-style ptid for
exec message. Call add_inferior_with_spaces and
target_follow_exec.
* nat/linux-ptrace.c (linux_supports_traceexec): New function.
* nat/linux-ptrace.h (linux_supports_traceexec): Declare.
* remote.c (remote_pspace_data): New static variable.
(remote_pspace_data_cleanup): New function.
(get_remote_exec_file): New function.
(set_remote_exec_file_1): New function.
(set_remote_exec_file): New function.
(show_remote_exec_file): New function.
(remote_exec_file): Delete static variable.
(anonymous enum) <PACKET_exec_event_feature> New
enumeration constant.
(remote_protocol_features): Add entry for exec-events feature.
(remote_query_supported): Add client side of qSupported query
for exec-events feature.
(remote_follow_exec): New function.
(remote_parse_stop_reply): Handle 'exec' stop reason.
(extended_remote_run, extended_remote_create_inferior): Call
get_remote_exec_file and set_remote_exec_file_1.
(init_extended_remote_ops) <to_follow_exec>: Initialize new
member.
(_initialize_remote): Call
register_program_space_data_with_cleanup. Call
add_packet_config_cmd for remote exec-events feature.
Modify call to add_setshow_string_noescape_cmd for exec-file
to use new functions set_remote_exec_file and
show_remote_exec_file.
* target-debug.h, target-delegates.c: Regenerated.
* target.c (target_follow_exec): New function.
* target.h (struct target_ops) <to_follow_exec>: New member.
(target_follow_exec): Declare new function.
Running that test in a loop, I found a gdbserver core dump with the
following back trace:
Core was generated by `../gdbserver/gdbserver --once --multi :2346'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x0000000000406ab6 in inferior_regcache_data (inferior=0x0) at src/gdb/gdbserver/inferiors.c:236
236 return inferior->regcache_data;
(gdb) up
#1 0x0000000000406d7f in get_thread_regcache (thread=0x0, fetch=1) at src/gdb/gdbserver/regcache.c:31
31 regcache = (struct regcache *) inferior_regcache_data (thread);
(gdb) bt
#0 0x0000000000406ab6 in inferior_regcache_data (inferior=0x0) at src/gdb/gdbserver/inferiors.c:236
#1 0x0000000000406d7f in get_thread_regcache (thread=0x0, fetch=1) at src/gdb/gdbserver/regcache.c:31
#2 0x0000000000409271 in prepare_resume_reply (buf=0x20dd593 "", ptid=..., status=0x20edce0) at src/gdb/gdbserver/remote-utils.c:1147
#3 0x000000000040ab0a in vstop_notif_reply (event=0x20edcc0, own_buf=0x20dd590 "T05") at src/gdb/gdbserver/server.c:183
#4 0x0000000000426b38 in notif_write_event (notif=0x66e6c0 <notif_stop>, own_buf=0x20dd590 "T05") at src/gdb/gdbserver/notif.c:69
#5 0x0000000000426c55 in handle_notif_ack (own_buf=0x20dd590 "T05", packet_len=8) at src/gdb/gdbserver/notif.c:113
#6 0x000000000041118f in handle_v_requests (own_buf=0x20dd590 "T05", packet_len=8, new_packet_len=0x7fff742c77b8)
at src/gdb/gdbserver/server.c:2862
#7 0x0000000000413850 in process_serial_event () at src/gdb/gdbserver/server.c:4148
#8 0x0000000000413945 in handle_serial_event (err=0, client_data=0x0) at src/gdb/gdbserver/server.c:4196
#9 0x000000000041a1ef in handle_file_event (event_file_desc=5) at src/gdb/gdbserver/event-loop.c:429
#10 0x00000000004199b6 in process_event () at src/gdb/gdbserver/event-loop.c:184
#11 0x000000000041a735 in start_event_loop () at src/gdb/gdbserver/event-loop.c:547
#12 0x00000000004123d2 in captured_main (argc=4, argv=0x7fff742c7ac8) at src/gdb/gdbserver/server.c:3562
#13 0x000000000041252e in main (argc=4, argv=0x7fff742c7ac8) at src/gdb/gdbserver/server.c:3631
Clearly this means that a thread pushed a stop reply in the event
queue, and then before GDB confused the event, the whole process died,
along with its thread. But the pending thread event was left
dangling. When GDB fetched that event, gdbserver looked up the
corresponding thread, but found NULL; not expecting this, gdbserver
crashes when it tries to read this thread's registers.
gdb/gdbserver/
2015-08-21 Pedro Alves <palves@redhat.com>
PR gdb/18749
* inferiors.c (remove_thread): Discard any pending stop reply for
this thread.
* server.c (remove_all_on_match_pid): Rename to ...
(remove_all_on_match_ptid): ... this. Work with a filter ptid
instead of a pid.
(discard_queued_stop_replies): Change parameter to a ptid. Now
extern.
(handle_v_kill, kill_inferior_callback)
(process_serial_event): Adjust.
(captured_main): Call initialize_notif before starting the
program, thus before threads are created.
* server.h (discard_queued_stop_replies): Declare.
In multi-arch debugging, if GDB sends Z0 packet, GDBserver should be
able to do several things below:
- choose the right breakpoint instruction to insert according to the
information available, such as 'kind' in Z0 packet and address,
- choose the right breakpoint instruction to check memory writes and
validate inserted memory breakpoint
- be aware of different breakpoint instructions in $ARCH_breakpoint_at.
unfortunately GDBserver can't do them now. Although x86 GDBserver
supports multi-arch, it doesn't need to support them above because
breakpoint instruction on i686 and x86_64 is the same. However,
breakpoint instructions on aarch64 and arm (arm mode, thumb1, and thumb2)
are different.
I tried to teach aarch64 GDBserver backend to be really
multi-arch-capable in the following ways,
- linux_low_target return the right breakpoint instruction according to
the 'kind' in Z0 packet, and insert_memory_breakpoint can do the right
thing.
- once breakpoint is inserted, the breakpoint data and length is recorded
in each breakpoint object, so that validate_breakpoint and
check_mem_write can get the right breakpoint instruction from each
breakpoint object, rather than from global variable breakpoint_data.
- linux_low_target needs another hook function for pc increment after
hitting a breakpoint.
- let set_breakpoint_at, which is widely used for tracepoint, use the
'default' breakpoint instruction. We can always use aarch64 breakpoint
instruction since arm doesn't support tracepoint yet.
looks it is not a small piece of work, so I decide to disable Z0 packet
on multi-arch, which means aarch64 GDBserver only supports Z0 packet
if it is started to debug only one process (extended protocol is not
used) and process target description is 64-bit.
gdb/gdbserver:
2015-08-04 Yao Qi <yao.qi@linaro.org>
* linux-aarch64-low.c (aarch64_supports_z_point_type): Return
0 for Z_PACKET_SW_BP if it may be used in multi-arch debugging.
* server.c (extended_protocol): Remove "static".
* server.h (extended_protocol): Declare it.
This patch implements follow-fork for vfork on extended-remote Linux targets.
The implementation follows the native implementation as much as possible.
Most of the work is done on the GDB side in the existing code now in
infrun.c. GDBserver just has to report the events and do a little
bookkeeping.
Implementation includes:
* enabling VFORK events by adding ptrace options for VFORK and VFORK_DONE
to linux-low.c:linux_low_ptrace_options.
* handling VFORK and VFORK_DONE events in linux-low.c:handle_extended_wait
and reporting them to GDB.
* including VFORK and VFORK_DONE events in the predicate
linux-low.c:extended_event_reported.
* adding support for VFORK and VFORK_DONE events in RSP by adding stop
reasons "vfork" and "vforkdone" to the 'T' Stop Reply Packet in both
gdbserver/remote-utils.c and gdb/remote.c.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Handle PTRACE_EVENT_FORK and
PTRACE_EVENT_VFORK_DONE.
(linux_low_ptrace_options, extended_event_reported): Add vfork
events.
* remote-utils.c (prepare_resume_reply): New stop reasons "vfork"
and "vforkdone" for RSP 'T' Stop Reply Packet.
* server.h (report_vfork_events): Declare
global variable.
gdb/ChangeLog:
* remote.c (remove_vfork_event_p): New function.
(remote_follow_fork): Add vfork event type to event checking.
(remote_parse_stop_reply): New stop reasons "vfork" and
"vforkdone" for RSP 'T' Stop Reply Packet.
This patch implements basic support for follow-fork and detach-on-fork on
extended-remote Linux targets. Only 'fork' is supported in this patch;
'vfork' support is added n a subsequent patch. This patch depends on
the previous patches in the patch series.
Sufficient extended-remote functionality has been implemented here to pass
gdb.base/multi-forks.exp, as well as gdb.base/foll-fork.exp with the
catchpoint tests commented out. Some other fork tests fail with this
patch because it doesn't provide the architecture support needed for
watchpoint inheritance or fork catchpoints.
The implementation follows the same general structure as for the native
implementation as much as possible.
This implementation includes:
* enabling fork events in linux-low.c in initialize_low and
linux_enable_extended_features
* handling fork events in gdbserver/linux-low.c:handle_extended_wait
- when a fork event occurs in gdbserver, we must do the full creation
of the new process, thread, lwp, and breakpoint lists. This is
required whether or not the new child is destined to be
detached-on-fork, because GDB will make target calls that require all
the structures. In particular we need the breakpoint lists in order
to remove the breakpoints from a detaching child. If we are not
detaching the child we will need all these structures anyway.
- as part of this event handling we store the target_waitstatus in a new
member of the parent lwp_info structure, 'waitstatus'. This
is used to store extended event information for reporting to GDB.
- handle_extended_wait is given a return value, denoting whether the
handled event should be reported to GDB. Previously it had only
handled clone events, which were never reported.
* using a new predicate in gdbserver to control handling of the fork event
(and eventually all extended events) in linux_wait_1. The predicate,
extended_event_reported, checks a target_waitstatus.kind for an
extended ptrace event.
* implementing a new RSP 'T' Stop Reply Packet stop reason: "fork", in
gdbserver/remote-utils.c and remote.c.
* implementing new target and RSP support for target_follow_fork with
target extended-remote. (The RSP components were actually defined in
patch 1, but they see their first use here).
- remote target routine remote_follow_fork, which just sends the 'D;pid'
detach packet to detach the new fork child cleanly. We can't just
call target_detach because the data structures for the forked child
have not been allocated on the host side.
Tested on x64 Ubuntu Lucid, native, remote, extended-remote.
gdb/gdbserver/ChangeLog:
* linux-low.c (handle_extended_wait): Implement return value,
rename argument 'event_child' to 'event_lwp', handle
PTRACE_EVENT_FORK, call internal_error for unrecognized event.
(linux_low_ptrace_options): New function.
(linux_low_filter_event): Call linux_low_ptrace_options,
use different argument fo linux_enable_event_reporting,
use return value from handle_extended_wait.
(extended_event_reported): New function.
(linux_wait_1): Call extended_event_reported and set
status to report fork events.
(linux_write_memory): Add pid to debug message.
(reset_lwp_ptrace_options_callback): New function.
(linux_handle_new_gdb_connection): New function.
(linux_target_ops): Initialize new structure member.
* linux-low.h (struct lwp_info) <waitstatus>: New member.
* lynx-low.c: Initialize new structure member.
* remote-utils.c (prepare_resume_reply): Implement stop reason
"fork" for "T" stop message.
* server.c (handle_query): Call handle_new_gdb_connection.
* server.h (report_fork_events): Declare global flag.
* target.h (struct target_ops) <handle_new_gdb_connection>:
New member.
(target_handle_new_gdb_connection): New macro.
* win32-low.c: Initialize new structure member.
gdb/ChangeLog:
* linux-nat.c (linux_nat_ptrace_options): New function.
(linux_init_ptrace, wait_lwp, linux_nat_filter_event):
Call linux_nat_ptrace_options and use different argument to
linux_enable_event_reporting.
(_initialize_linux_nat): Delete call to
linux_ptrace_set_additional_flags.
* nat/linux-ptrace.c (current_ptrace_options): Rename to
supported_ptrace_options.
(additional_flags): Delete variable.
(linux_check_ptrace_features): Use supported_ptrace_options.
(linux_test_for_tracesysgood, linux_test_for_tracefork):
Likewise, and remove additional_flags check.
(linux_enable_event_reporting): Change 'attached' argument to
'options'. Use supported_ptrace_options.
(ptrace_supports_feature): Change comment. Use
supported_ptrace_options.
(linux_ptrace_set_additional_flags): Delete function.
* nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
Delete function prototype.
* remote.c (remote_fork_event_p): New function.
(remote_detach_pid): New function.
(remote_detach_1): Call remote_detach_pid, don't mourn inferior
if doing detach-on-fork.
(remote_follow_fork): New function.
(remote_parse_stop_reply): Handle new "T" stop reason "fork".
(remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
(init_extended_remote_ops): Initialize to_follow_fork.
This patch teaches the core of gdbserver about the new "swbreak" and
"hwbreak" stop reasons, and adds the necessary hooks a backend needs
to implement to support the feature.
gdb/gdbserver/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* remote-utils.c (prepare_resume_reply): Report swbreak/hbreak.
* server.c (swbreak_feature, hwbreak_feature): New globals.
(handle_query) <qSupported>: Handle "swbreak+" and "hwbreak+".
(captured_main): Clear swbreak_feature and hwbreak_feature.
* server.h (swbreak_feature, hwbreak_feature): Declare.
* target.h (struct target_ops) <stopped_by_sw_breakpoint,
supports_stopped_by_sw_breakpoint, stopped_by_hw_breakpoint,
supports_stopped_by_hw_breakpoint>: New fields.
(target_supports_stopped_by_sw_breakpoint)
(target_stopped_by_sw_breakpoint)
(target_supports_stopped_by_hw_breakpoint)
(target_stopped_by_hw_breakpoint): Declare.
Since gnulib alloca module was imported, we can include alloca.h in
both gdb and gdbserver unconditionally, so this patch adds inclusion
of alloca.h in common-defs.h. This patch also removes AC_FUNC_ALLOCA
in configure.ac because we don't need to check alloca any more.
This patch below is removed in fact.
[RFA/commit] include alloca.h if available.
https://www.sourceware.org/ml/gdb-patches/2010-08/msg00566.html
Since alloca.h is from gnulib now, we don't have to check malloc.h in
configure and include malloc.h in code. This patch also remove them
too.
gdb:
2014-11-21 Yao Qi <yao@codesourcery.com>
* common/common-defs.h: Include alloca.h
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
* configure: Re-generated.
* defs.h: Remove code handling alloca.
* utils.c (gdb_realpath): Don't check HAVE_ALLOCA is defined
or not.
gdb/gdbserver:
2014-11-21 Yao Qi <yao@codesourcery.com>
* configure.ac: Don't invoke AC_FUNC_ALLOCA.
(AC_CHECK_HEADERS): Remove malloc.h.
* configure: Re-generated.
* config.in: Re-generated.
* server.h: Don't include alloca.h and malloc.h.
* gdbreplay.c: Don't check HAVE_ALLOCA_H is defined.
Don't include malloc.h.
This commit includes common-exceptions.h in common-defs.h and removes
all other inclusions.
gdb/ChangeLog:
* common/common-defs.h: Include common-exceptions.h.
* exceptions.h: Do not include common-exceptions.h.
gdb/gdbserver/ChangeLog:
* server.h: Do not include common-exceptions.h.
This commit includes cleanups.h in common-defs.h and removes all other
inclusions.
gdb/ChangeLog:
* common/common-defs.h: Include cleanups.h.
* common/common-exceptions.c: Do not include cleanups.h.
* utils.h: Likewise.
gdb/gdbserver/ChangeLog:
* server.h: Do not include cleanups.h.
This commit adds a new global flag show_debug_regs to common-debug.h
to replace the flag debug_hw_points used by gdbserver and by the
Linux x86 and AArch64 ports, and to replace the flag maint_show_dr
used by the Linux MIPS port.
Note that some debug printing in the AArch64 port was enabled only if
debug_hw_points > 1 but no way to set debug_hw_points to values other
than 0 and 1 was provided; that code was effectively dead. This
commit enables all debug printing if show_debug_regs is nonzero, so
the AArch64 output will be more verbose than previously.
gdb/ChangeLog:
* common/common-debug.h (show_debug_regs): Declare.
* common/common-debug.c (show_debug_regs): Define.
* aarch64-linux-nat.c (debug_hw_points): Don't define. Replace
all uses with show_debug_regs. Replace all uses that considered
debug_hw_points as a multi-value integer with straight boolean
uses.
* x86-nat.c (debug_hw_points): Don't define. Replace all uses
with show_debug_regs.
* nat/x86-dregs.c (debug_hw_points): Don't declare. Replace
all uses with show_debug_regs.
* mips-linux-nat.c (maint_show_dr): Don't define. Replace all
uses with show_debug_regs.
gdb/gdbserver/ChangeLog:
* server.h (debug_hw_points): Don't declare.
* server.c (debug_hw_points): Don't define. Replace all uses
with show_debug_regs.
* linux-aarch64-low.c (debug_hw_points): Don't define. Replace
all uses with show_debug_regs.
This commit replaces the hacky "exception" system in gdbserver with
the exceptions and cleanups subsystem from GDB.
Only the catch/cleanup code in what was "main" has been updated to
use the new system. Other parts of gdbserver can now be converted
to use TRY_CATCH and cleanups on an as-needed basis.
A side-effect of this commit is that some error messages will change
slightly, and in cases with multiple errors the error messages will
be printed in a different order.
gdb/gdbserver/ChangeLog:
* server.h (setjmp.h): Do not include.
(toplevel): Do not declare.
(common-exceptions.h): Include.
(cleanups.h): Likewise.
* server.c (toplevel): Do not define.
(exit_code): New static global.
(detach_or_kill_for_exit_cleanup): New function.
(main): New function. Original main renamed to...
(captured_main): New function.
* utils.c (verror) [!IN_PROCESS_AGENT]: Use throw_verror.
This introduces common-types.h. This file defines various standard
types used by gdb and gdbserver.
Currently these types are conditionally defined based on GDBSERVER.
The long term goal is to remove all such tests; however, this is
difficult as currently gdb uses definitions from BFD. In the meantime
this is still a step in the right direction.
gdb/ChangeLog:
* common/common-types.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-types.h.
* common/common-defs.h: Include common-types.h.
* defs.h (gdb_byte, CORE_ADDR, CORE_ADDR_MAX, LONGEST)
(ULONGEST): Remove.
gdb/gdbserver/ChangeLog:
* server.h: Add static assertion.
(gdb_byte, CORE_ADDR, LONGEST, ULONGEST): Remove.
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
This commit moves the inclusion of common-utils.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include common-utils.h.
* defs.h: Do not include common-utils.h.
* common/gdb_assert.h: Likewise.
* darwin-nat.h: Likewise.
* nat/linux-btrace.c: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include common-utils.h.
This commit moves the inclusion of ptid.h to common-defs.h and removes
all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ptid.h.
* defs.h: Do not include ptid.h.
* inferior.h: Likewise.
* infrun.h: Likewise.
* nat/linux-btrace.h: Likewise.
* nat/linux-osdata.h: Likewise.
* target/waitstatus.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ptid.h.
* notif.h: Likewise.
This commit moves the inclusion of gdb_locale.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb_locale.h.
* defs.h: Do not include gdb_locale.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb_locale.h.
This commit moves the inclusion of gdb/signals.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include gdb/signals.h.
* defs.h: Do not include gdb/signals.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include gdb/signals.h.
* win32-low.c: Likewise.
This commit moves the inclusion of pathmax.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include pathmax.h.
* defs.h: Do not include pathmax.h.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include pathmax.h.
This commit moves the inclusion of libiberty.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include libiberty.h.
* defs.h: Do not include libiberty.h.
* common/queue.h: Likewise.
* cp-name-parser.y: Likewise.
* mi/mi-cmd-catch.c: Likewise.
* python/python.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include libiberty.h.
* linux-bfin-low.c: Likewise.
This commit moves the inclusion of ansidecl.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include ansidecl.h.
* defs.h: Do not include ansidecl.h.
* common/buffer.h: Likewise.
* common/common-utils.h: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include ansidecl.h.
This commit moves the inclusion of stdarg.h to common-defs.h and
removes all other inclusions.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include stdarg.h.
* defs.h: Do not include stdarg.h.
* ada-lang.c: Likewise.
* common/common-utils.h: Likewise.
* guile/scm-string.c: Likewise.
* guile/scm-utils.c: Likewise.
* m32c-tdep.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* server.h: Do not include stdarg.h.
* nto-low.c: Likewise.
This commit creates a new header, common/common-defs.h, to hold
definitions common to all code under gdb/. Both gdb/defs.h and
gdb/gdbserver/server.h are modified to include common-defs.h as
their first non-comment line; all code under gdb/ includes either
defs.h or server.h as appropriate, so common-defs.h will be the
first actual code the compiler sees.
For this initial commit common-defs.h includes only the two
config.h files. Future commits will move more code currently
duplicated across defs.h and server.h such that shared code in
gdb/{common,target,nat} can be modified to include common-defs.h
rather than defs.h or server.h.
gdb/
2014-07-30 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add common/common-defs.h.
* defs.h: Include common-defs.h.
Do not include config.h or build-gnulib/config.h.
gdb/gdbserver/
2014-07-30 Gary Benson <gbenson@redhat.com>
* server.h: Include common-defs.h.
Do not include config.h or build-gnulib-gdbserver/config.h.
gdbserver defines CORE_ADDR to be signed. This seems erroneous to
me; and furthermore likely to cause problems in common/, as it is
different from gdb's definition.
gdb/gdbserver/
2014-07-24 Tom Tromey <tromey@redhat.com>
Gary Benson <gbenson@redhat.com>
* server.h (CORE_ADDR): Now unsigned.
Now that we are using the gnulib string.h module, we don't need to
check for string.h or strings.h. This removes the last few checks
from the source and from the configure scripts.
2013-11-18 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* common/common.m4 (GDB_AC_COMMON): Don't check for string.h or
strings.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* server.h: Don't check HAVE_STRING_H.
* gdbreplay.c: Don't check HAVE_STRING_H.
* configure: Rebuild.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (gdb_client_data, handler_func, callback_handler_func)
(delete_file_handler, add_file_handler, append_callback_event)
(delete_callback_event, start_event_loop, initialize_event_loop):
Move to event-loop.h and include it.
* event-loop.h: New file.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (perror_with_name, error, fatal, warning, paddress)
(pulongest, plongest, phex_nz, pfildes): Move to utils.h, and
include it.
* utils.h: New file.
server.h nowadays includes gdb_locale.h, which already brings this in.
gdb/gdbserver/
2013-09-05 Pedro Alves <palves@redhat.com>
* server.h (_): Delete.
With the pathmax gnulib module in place, we can use PATH_MAX
consistently throughout, instead of the current mixbag of PATH_MAX and
MAXPATHLEN uses. It's no longer necessary to include sys/param.h
(supposedly, I can't check all ports touched here) for MAXPATHLEN.
Don't remove sys/param.h from GDB's configure.ac, as later tests in
the file use HAVE_SYS_PARAM_H checks.
Tested on x86_64 Fedora 17.
Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp.
gdb/
2013-07-01 Pedro Alves <palves@redhat.com>
* defs.h: Include "pathmax.h".
* utils.c: Don't include sys/param.h.
(gdb_realpath): Remove code that checks for MAXPATHLEN.
* solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
instead of MAXPATHLEN.
* solib-sunos.c: Don't include sys/param.h.
* xcoffread.c: Don't include sys/param.h.
* bsd-kvm.c: Don't include sys/param.h.
* darwin-nat.c: Don't include sys/param.h.
(darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* darwin-nat-info.c: Don't include sys/param.h.
* fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
MAXPATHLEN.
* i386obsd-nat.c: Don't include sys/param.h.
* inf-child.c: Don't include sys/param.h.
(inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
* linux-fork.c: Don't include sys/param.h.
(fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
* linux-nat.c: Don't include sys/param.h.
(linux_child_pid_to_exec_file, linux_proc_pending_signals)
(linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
* m68klinux-nat.c: Don't include sys/param.h.
* nbsd-nat.c: Don't include sys/param.h.
(nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
* ppc-linux-nat.c: Don't include sys/param.h.
* rs6000-nat.c: Don't include sys/param.h.
* spu-linux-nat.c. Don't include sys/param.h.
* windows-nat.c: Don't include sys/param.h.
* xtensa-linux-nat.c: Don't include sys/param.h.
* config/i386/nm-fbsd.h: Don't include sys/param.h.
gdb/gdbserver/
2013-07-01 Pedro Alves <palves@redhat.com>
* server.h: Include "pathmax.h".
* linux-low.c: Don't include sys/param.h.
(linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of
MAXPATHLEN.
* win32-low.c: Don't include sys/param.h.
(win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
Right now there are two nightly commits to update a file in the tree
with the current date. One commit is for BFD, one is for gdb.
It seems unnecessary to me to do this twice. We can make do with a
single such commit.
This patch changes gdb in a minimal way to reuse the BFD date -- it
extracts it from bfd/version.h and changes version.in to use the
placeholder string "DATE" for those times when a date is wanted.
I propose removing the cron job that updates the version on trunk, and
then check in this patch.
For release branches, we can keep the cron job, but just tell it to
rewrite bfd/version.h. I believe this is a simple change in the
crontab -- the script will work just fine on this file.
This also moves version.in and version.h into common/, to reflect
their shared status; and updates gdbserver to use version.h besides.
* common/create-version.sh: New file.
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(HFILES_NO_SRCDIR): Use common/version.h.
* version.in: Move to ...
* common/version.in: ... here. Replace date with "DATE".
* version.h: Move to ...
* common/version.h: ... here.
gdbserver:
* Makefile.in (version.c): Use bfd/version.h, common/version.in,
create-version.sh.
(version.o): Remove.
* gdbreplay.c: Include version.h.
(version, host_name): Don't declare.
* server.h: Include version.h.
(version, host_name): Don't declare.
doc:
* Makefile.in (POD2MAN1, POD2MAN5): Use version.subst.
(GDBvn.texi): Use version.subst.
(version.subst): New target.
(mostlyclean): Remove version.subst.
This patch makes GDBserver support multi-process + biarch.
Currently, if you're debugging more than one process at once with a
single gdbserver (in extended-remote mode), then all processes must
have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you
see this:
Added inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
Reading symbols from /home/pedro/gdb/tests/main32...done.
Temporary breakpoint 2 at 0x4004cf: main. (2 locations)
Starting program: /home/pedro/gdb/tests/main32
warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64
warning: Architecture rejected target-supplied description
Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... etc, etc ...
Even though the process was running a 32-bit program, GDBserver sent
back to GDB a register set in 64-bit layout.
A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a
while ago made GDB track a target_gdbarch per inferior, and as
consequence, fetch a target description per-inferior. This patch is
the GDBserver counterpart, that makes GDBserver keep track of each
process'es XML target description and register layout. So in the
example above, GDBserver will send the correct register set in 32-bit
layout to GDB.
A new "struct target_desc" object (tdesc for short) is added, that
holds the target description and register layout information about
each process. Each `struct process_info' holds a pointer to a target
description. The regcache also gains a pointer to a target
description, mainly for convenience, and parallel with GDB (and
possible future support for programs that flip processor modes).
The low target's arch_setup routines are responsible for setting the
process'es correct tdesc. This isn't that much different to how
things were done before, except that instead of detecting the inferior
process'es architecture and calling the corresponding
init_registers_FOO routine, which would change the regcache layout
globals and recreate the threads' regcaches, the regcache.c globals
are gone, and the init_registers_$BAR routines now each initialize a
separate global struct target_desc object (one for each arch variant
GDBserver supports), and so all the init_registers_$BAR routines that
are built into GDBserver are called early at GDBserver startup time
(similarly to how GDB handles its built-in target descriptions), and
then the arch_setup routine is responsible for making
process_info->tdesc point to one of these target description globals.
The regcache module is all parameterized to get the regcache's layout
from the tdesc object instead of the old register_bytes, etc. globals.
The threads' regcaches are now created lazily. The old scheme where
we created each of them when we added a new thread doesn't work
anymore, because we add the main thread/lwp before we see it stop for
the first time, and it is only when we see the thread stop for the
first time that we have a chance of determining the inferior's
architecture (through the_low_target.arch_setup). Therefore when we
add the main thread we don't know which architecture/tdesc its
regcache should have.
This patch makes the gdb.multi/multi-arch.exp test now pass against
(extended-remote) GDBserver. It currently fails, without this patch.
The IPA also uses the regcache, so it gains a new global struct
target_desc pointer, which points at the description of the process it
is loaded in.
Re. the linux-low.c & friends changes. Since the register map
etc. may differ between processes (64-bit vs 32-bit) etc., the
linux_target_ops num_regs, regmap and regset_bitmap data fields are no
longer sufficient. A new method is added in their place that returns
a pointer to a new struct that includes all info linux-low.c needs to
access registers of the current inferior.
The patch/discussion that originally introduced
linux-low.c:disabled_regsets mentions that the disabled_regsets set
may be different per mode (in a biarch setup), and indeed that is
cleared whenever we start a new (first) inferior, so that global is
moved as well behind the new `struct regs_info'.
On the x86 side:
I simply replaced the i387-fp.c:num_xmm_registers global with a check
for 64-bit or 32-bit process, which is equivalent to how the global
was set. This avoided coming up with some more general mechanism that
would work for all targets that use this module (GNU/Linux, Windows,
etc.).
Tested:
GNU/Linux IA64
GNU/Linux MIPS64
GNU/Linux PowerPC (Fedora 16)
GNU/Linux s390x (Fedora 16)
GNU/Linux sparc64 (Debian)
GNU/Linux x86_64, -m64 and -m32 (Fedora 17)
Cross built, and smoke tested:
i686-w64-mingw32, under Wine.
GNU/Linux TI C6x, by Yao Qi.
Cross built but otherwise not tested:
aarch64-linux-gnu
arm-linux-gnu
m68k-linux
nios2-linux-gnu
sh-linux-gnu
spu
tilegx-unknown-linux-gnu
Completely untested:
GNU/Linux Blackfin
GNU/Linux CRIS
GNU/Linux CRISv32
GNU/Linux TI Xtensa
GNU/Linux M32R
LynxOS
QNX NTO
gdb/gdbserver/
2013-06-07 Pedro Alves <palves@redhat.com>
* Makefile.in (OBS): Add tdesc.o.
(IPA_OBJS): Add tdesc-ipa.o.
(tdesc-ipa.o): New rule.
* ax.c (gdb_eval_agent_expr): Adjust register_size call to new
interface.
* linux-low.c (new_inferior): Delete.
(disabled_regsets, num_regsets): Delete.
(linux_add_process): Adjust to set the new per-process
new_inferior flag.
(linux_detach_one_lwp): Adjust to call regcache_invalidate_thread.
(linux_wait_for_lwp): Adjust. Only call arch_setup if the event
was a stop. When calling arch_setup, switch the current inferior
to the thread that got an event.
(linux_resume_one_lwp): Adjust to call regcache_invalidate_thread.
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers): New regsets_info parameter.
Adjust to use it.
(linux_register_in_regsets): New regs_info parameter. Adjust to
use it.
(register_addr, fetch_register, store_register): New usrregs_info
parameter. Adjust to use it.
(usr_fetch_inferior_registers, usr_store_inferior_registers): New
parameter regs_info. Adjust to use it.
(linux_fetch_registers): Get the current inferior's regs_info, and
adjust to use it.
(linux_store_registers): Ditto.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): New.
(initialize_low): Don't initialize the target_regsets here. Call
initialize_low_arch.
* linux-low.h (target_regsets): Delete declaration.
(struct regsets_info): New.
(struct usrregs_info): New.
(struct regs_info): New.
(struct process_info_private) <new_inferior>: New field.
(struct linux_target_ops): Delete the num_regs, regmap, and
regset_bitmap fields. New field regs_info.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare.
* i387-fp.c (num_xmm_registers): Delete.
(i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno
calls to new interface.
(i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache)
(i387_xsave_to_cache): Adjust find_regno calls to new interface.
Infer the number of xmm registers from the regcache's target
description.
* i387-fp.h (num_xmm_registers): Delete.
* inferiors.c (add_thread): Don't install the thread's regcache
here.
* proc-service.c (gregset_info): Fetch the current inferior's
regs_info. Adjust to use it.
* regcache.c: Include tdesc.h.
(register_bytes, reg_defs, num_registers)
(gdbserver_expedite_regs): Delete.
(get_thread_regcache): If the thread doesn't have a regcache yet,
create one, instead of aborting gdbserver.
(regcache_invalidate_one): Rename to ...
(regcache_invalidate_thread): ... this.
(regcache_invalidate_one): New.
(regcache_invalidate): Only invalidate registers of the current
process.
(init_register_cache): Add target_desc parameter, and use it.
(new_register_cache): Ditto. Assert the target description has a
non zero registers_size.
(regcache_cpy): Add assertions. Adjust.
(realloc_register_cache, set_register_cache): Delete.
(registers_to_string, registers_from_string): Adjust.
(find_register_by_name, find_regno, find_register_by_number)
(register_cache_size): Add target_desc parameter, and use it.
(free_register_cache_thread, free_register_cache_thread_one)
(regcache_release, register_cache_size): New.
(register_size): Add target_desc parameter, and use it.
(register_data, supply_register, supply_register_zeroed)
(supply_regblock, supply_register_by_name, collect_register)
(collect_register_as_string, collect_register_by_name): Adjust.
* regcache.h (struct target_desc): Forward declare.
(struct regcache) <tdesc>: New field.
(init_register_cache, new_register_cache): Add target_desc
parameter.
(regcache_invalidate_thread): Declare.
(regcache_invalidate_one): Delete declaration.
(regcache_release): Declare.
(find_register_by_number, register_cache_size, register_size)
(find_regno): Add target_desc parameter.
(gdbserver_expedite_regs, gdbserver_xmltarget): Delete
declarations.
* remote-utils.c: Include tdesc.h.
(outreg, prepare_resume_reply): Adjust.
* server.c: Include tdesc.h.
(gdbserver_xmltarget): Delete declaration.
(get_features_xml, process_serial_event): Adjust.
* server.h [IN_PROCESS_AGENT] (struct target_desc): Forward
declare.
(struct process_info) <tdesc>: New field.
(ipa_tdesc): Declare.
* tdesc.c: New file.
* tdesc.h: New file.
* tracepoint.c: Include tdesc.h.
[IN_PROCESS_AGENT] (ipa_tdesc): Define.
(get_context_regcache): Adjust to pass ipa_tdesc down.
(do_action_at_tracepoint): Adjust to get the register cache size
from the context regcache's description.
(traceframe_walk_blocks): Adjust to get the register cache size
from the current trace frame's description.
(traceframe_get_pc): Adjust to get current trace frame's
description and pass it down.
(gdb_collect): Adjust to get the register cache size from the
IPA's description.
* linux-amd64-ipa.c (tdesc_amd64_linux): Declare.
(gdbserver_xmltarget): Delete.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-i386-ipa.c (tdesc_i386_linux): Declare.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-x86-low.c: Include tdesc.h.
[__x86_64__] (is_64bit_tdesc): New.
(ps_get_thread_area, x86_get_thread_area): Use it.
(i386_cannot_store_register): Rename to ...
(x86_cannot_store_register): ... this. Use is_64bit_tdesc.
(i386_cannot_fetch_register): Rename to ...
(x86_cannot_fetch_register): ... this. Use is_64bit_tdesc.
(x86_fill_gregset, x86_store_gregset): Adjust register_size calls
to new interface.
(target_regsets): Rename to ...
(x86_regsets): ... this.
(x86_get_pc, x86_set_pc): Adjust register_size calls to new
interface.
(x86_siginfo_fixup): Use is_64bit_tdesc.
[__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux)
(tdesc_x32_avx_linux, tdesc_x32_linux)
(tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux):
Declare.
(x86_linux_update_xmltarget): Delete.
(I386_LINUX_XSAVE_XCR0_OFFSET): Define.
(have_ptrace_getfpxregs, have_ptrace_getregset): New.
(AMD64_LINUX_USER64_CS): New.
(x86_linux_read_description): New, based on
x86_linux_update_xmltarget.
(same_process_callback): New.
(x86_arch_setup_process_callback): New.
(x86_linux_update_xmltarget): New.
(x86_regsets_info): New.
(amd64_linux_regs_info): New.
(i386_linux_usrregs_info): New.
(i386_linux_regs_info): New.
(x86_linux_regs_info): New.
(x86_arch_setup): Reimplement.
(x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc.
(x86_emit_ops): Ditto.
(the_low_target): Adjust. Install x86_linux_regs_info,
x86_cannot_fetch_register, and x86_cannot_store_register.
(initialize_low_arch): New.
* linux-ia64-low.c (tdesc_ia64): Declare.
(ia64_fetch_register): Adjust.
(ia64_usrregs_info, regs_info): New globals.
(ia64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sparc-low.c (tdesc_sparc64): Declare.
(sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack):
Adjust.
(sparc_arch_setup): New function.
(sparc_regsets_info, sparc_usrregs_info, regs_info): New globals.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l)
(tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l)
(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l)
(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l)
(tdesc_powerpc_64l, tdesc_powerpc_altivec64l)
(tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l)
(tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l)
(tdesc_powerpc_isa205_vsx64l): Declare.
(ppc_cannot_store_register, ppc_collect_ptrace_register)
(ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc)
(ppc_set_pc, ppc_get_hwcap): Adjust.
(ppc_usrregs_info): Forward declare.
(!__powerpc64__) ppc_regmap_adjusted: New global.
(ppc_arch_setup): Adjust to the current process'es target
description.
(ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset)
(ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse)
(ppc_store_evrregset): Adjust.
(target_regsets): Rename to ...
(ppc_regsets): ... this, and make static.
(ppc_usrregs_info, ppc_regsets_info, regs_info): New globals.
(ppc_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1)
(tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1)
(tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1)
(tdesc_s390x_linux64v2): Declare.
(s390_collect_ptrace_register, s390_supply_ptrace_register)
(s390_fill_gregset, s390_store_last_break): Adjust.
(target_regsets): Rename to ...
(s390_regsets): ... this, and make static.
(s390_get_pc, s390_set_pc): Adjust.
(s390_get_hwcap): New target_desc parameter, and use it.
[__s390x__] (have_hwcap_s390_high_gprs): New global.
(s390_arch_setup): Adjust to set the current process'es target
description. Don't adjust the regmap.
(s390_usrregs_info, s390_regsets_info, regs_info): New globals.
[__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264)
(regs_info_3264): New globals.
(s390_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux)
(tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare.
[__mips64] (init_registers_mips_linux)
(init_registers_mips_dsp_linux): Delete defines.
[__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines.
(have_dsp): New global.
(mips_read_description): New, based on mips_arch_setup.
(mips_arch_setup): Reimplement.
(get_usrregs_info): New function.
(mips_cannot_fetch_register, mips_cannot_store_register)
(mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset)
(mips_fill_fpregset, mips_store_fpregset): Adjust.
(target_regsets): Rename to ...
(mips_regsets): ... this, and make static.
(mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info)
(dsp_regs_info, regs_info): New globals.
(mips_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt)
(tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon):
Declare.
(arm_fill_vfpregset, arm_store_vfpregset): Adjust.
(arm_read_description): New, with bits factored from
arm_arch_setup.
(arm_arch_setup): Reimplement.
(target_regsets): Rename to ...
(arm_regsets): ... this, and make static.
(arm_regsets_info, arm_usrregs_info, regs_info): New globals.
(arm_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m68k-low.c (tdesc_m68k): Declare.
(target_regsets): Rename to ...
(m68k_regsets): ... this, and make static.
(m68k_regsets_info, m68k_usrregs_info, regs_info): New globals.
(m68k_regs_info): New function.
(m68k_arch_setup): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sh-low.c (tdesc_sharch): Declare.
(target_regsets): Rename to ...
(sh_regsets): ... this, and make static.
(sh_regsets_info, sh_usrregs_info, regs_info): New globals.
(sh_regs_info, sh_arch_setup): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-bfin-low.c (tdesc_bfin): Declare.
(bfin_arch_setup): New function.
(bfin_usrregs_info, regs_info): New globals.
(bfin_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_cris): Declare.
(cris_arch_setup): New function.
(cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_crisv32): Declare.
(cris_arch_setup): New function.
(cris_regsets_info, cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m32r-low.c (tdesc_m32r): Declare.
(m32r_arch_setup): New function.
(m32r_usrregs_info, regs_info): New globals.
(m32r_regs_info): Adjust.
(initialize_low_arch): New function.
* linux-tic6x-low.c (tdesc_tic6x_c64xp_linux)
(tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare.
(tic6x_usrregs_info): Forward declare.
(tic6x_read_description): New function, based on ...
(tic6x_arch_setup): ... this. Reimplement.
(target_regsets): Rename to ...
(tic6x_regsets): ... this, and make static.
(tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals.
(tic6x_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-xtensa-low.c (tdesc_xtensa): Declare.
(xtensa_fill_gregset, xtensa_store_gregset): Adjust.
(target_regsets): Rename to ...
(xtensa_regsets): ... this, and make static.
(xtensa_regsets_info, xtensa_usrregs_info, regs_info): New
globals.
(xtensa_arch_setup, xtensa_regs_info): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-nios2-low.c (tdesc_nios2_linux): Declare.
(nios2_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(nios2_regsets): ... this.
(nios2_regsets_info, nios2_usrregs_info, regs_info): New globals.
(nios2_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-aarch64-low.c (tdesc_aarch64): Declare.
(aarch64_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(aarch64_regsets): ... this.
(aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals.
(aarch64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare
globals.
(target_regsets): Rename to ...
(tile_regsets): ... this.
(tile_regsets_info, tile_usrregs_info, regs_info): New globals.
(tile_regs_info): New function.
(tile_arch_setup): Set the current process'es tdesc.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* spu-low.c (tdesc_spu): Declare.
(spu_create_inferior, spu_attach): Set the new process'es tdesc.
* win32-arm-low.c (tdesc_arm): Declare.
(arm_arch_setup): New function.
(the_low_target): Install arm_arch_setup instead of
init_registers_arm.
* win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare.
(init_windows_x86): Rename to ...
(i386_arch_setup): ... this. Set `win32_tdesc'.
(the_low_target): Adjust.
* win32-low.c (win32_tdesc): New global.
(child_add_thread): Don't create the thread cache here.
(do_initial_child_stuff): Set the new process'es tdesc.
* win32-low.h (struct target_desc): Forward declare.
(win32_tdesc): Declare.
* lynx-i386-low.c (tdesc_i386): Declare global.
(lynx_i386_arch_setup): Set `lynx_tdesc'.
* lynx-low.c (lynx_tdesc): New global.
(lynx_add_process): Set the new process'es tdesc.
* lynx-low.h (struct target_desc): Forward declare.
(lynx_tdesc): Declare global.
* lynx-ppc-low.c (tdesc_powerpc_32): Declare global.
(lynx_ppc_arch_setup): Set `lynx_tdesc'.
* nto-low.c (nto_tdesc): New global.
(do_attach): Set the new process'es tdesc.
* nto-low.h (struct target_desc): Forward declare.
(nto_tdesc): Declare.
* nto-x86-low.c (tdesc_i386): Declare.
(nto_x86_arch_setup): Set `nto_tdesc'.
gdb/
2013-06-07 Pedro Alves <palves@redhat.com>
* regformats/regdat.sh: Output #include tdesc.h. Make globals
static. Output a global target description pointer.
(init_registers_${name}): Adjust to initialize a
target description structure.
Marcin Kościelnicki
Josh Stone
Joel Brobecker
Antoine Tremblay
Yao Qi
Pedro Alves
Don Breazeal
Yao Qi
Gary Benson
Tom Tromey
Doug Evans