In this patch, we start to use aarch64_decode_insn to decode instructions
in aarch64_software_single_step.
gdb:
2015-10-07 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c: Include opcode/aarch64.h.
(submask): Move it above.
(bit): Likewise.
(bits): Likewise.
(aarch64_software_single_step): Call aarch64_decode_insn.
Decode instruction by aarch64_inst instead of using
aarch64_decode_bcond and decode_masked_match.
When applying a GOTDATA_OP* relocation to a local symbol, the addend
is being applied after getting the value of the symbol. When the
relocation refers to a merge section, however, the addend must be
provided when computing the symbol value, since the contents of
the section may have been rearranged.
gold/
PR gold/18855
* sparc.cc (Sparc_relocate_functions::gdop_hix22): Remove addend
parameter.
(Sparc_relocate_functions::gdop_lox10): Likewise.
(Target_sparc::Relocate::relocate): Use addend when computing
symbol value for R_SPARC_GOTDATA_OP*.
It is better to clear the ch_reserved field of Elf64_External_Chdr
in 64-bit output.
* bfd.c (bfd_update_compression_header): Clear the ch_reserved
field in 64-bit output.
(bfd_convert_section_contents): Likewise.
Following failures are noticed for avr-gdb. This may be the case
for targets like AVR which has integer_to_address hook defined.
FAIL: gdb.base/dump.exp: struct copy, srec; value restored ok
FAIL: gdb.base/dump.exp: struct copy, ihex; value restored ok
FAIL: gdb.base/dump.exp: struct copy, tekhex; value restored ok
These tests are failed because load_offset(bias) of restore command
parsed as address.
command: restore filename [binary] bias start end
Except binary, other BFDs have a built-in location; gdb restores content
at offset 'bias' from that location. So, 'bias' of 'restore' command should
be parsed as address only when the file is binary.
Below patch changes gdb to parse 'bias' as long if the file is not binary.
gdb/ChangeLog
2015-10-06 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
* cli/cli-dump.c (restore_command): Parse load_offset (bias) as address
only when the file is binary.
For ELF linker, a common symbol isn't a definition. When we decide if a
symbol should be re-exported, we should check if the symbol isn't
undefined, not if it is a definition.
bfd/
PR ld/18914
* elflink.c (elf_link_add_object_symbols): Don't re-export a
symbol if it isn't undefined.
ld/testsuite/
PR ld/18914
* ld-elf/exclude.exp: Also check exclude_common.
* ld-elf/exclude2.s: Add exclude_common.
The ch_type field in struct Chdr_data<64> is 4 bytes, followed by a
4-byte padding. This change doesn't introduce any functional change
since only the lower 32 bits of the ch_type field are used.
PR gold/19060
* elfcpp.h (Chdr::get_ch_type): Change return type to Elf_Word.
* elfcpp_internal.h (Chdr_data<64>): Change ch_type to 4 bytes
and add ch_reserved.
The stack unwinder did not understand the function prologs
generated by gcc with -Os. Add code to recognize and interpret the
prolog calls.
[gdb]
2015-10-02 James Bowman <james.bowman@ftdichip.com>
* ft32-tdep.c (ft32_analyze_prologue): Add function prolog
subroutine handling.
2015-10-02 Sandra Loosemore <sandra@codesourcery.com>
gdb/testsuite/
* gdb.dwarf2/staticvirtual.exp: Generalize regexp so it can match
whether or not address 0x1000 is mapped on the target.
bfd/
2015-10-02 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Add
TLSIE_MOVW_GOTTPREL_G1.
(aarch64_tls_transition_without_check): Add
TLSIE_MOVW_GOTTPREL_G1 to TLSLE_MOVW_TPREL_G2
transition for local symbol.
(elfNN_aarch64_tls_relax): Add a argument to pass tp offset.
Add TLSIE_MOVW_GOTTPREL_G1 relaxation.
(elfNN_aarch64_relocate_section): Call elfNN_aarch64_tls_relax
with new argument.
ld/testsuite/
2015-10-02 Renlin Li <renlin.li@arm.com>
* ld-aarch64/aarch64-elf.exp (tls-relax-large-le-ie): Run new test.
* ld-aarch64/tls-relax-large-ie-le.d: New.
* ld-aarch64/tls-relax-large-ie-le.s: New.
bfd/
2015-10-02 Renlin Li <renlin.li@arm.com>
* elfnn-aarch64.c(IS_AARCH64_TLS_RELAX_RELOC):
Add relaxation support for TLSGD_MOVW_G0_NC and TLSGD_MOVW_G1.
(aarch64_tls_transition_without_check): Likewise
(elfNN_aarch64_tls_relax): Likwise.
ld/testsuite/
2015-10-02 Renlin Li <renlin.li@arm.com>
* ld-aarch64/aarch64-elf.exp: run new test
* ld-aarch64/tls-relax-large-gd-ie.d: New.
* ld-aarch64/tls-relax-large-gd-ie.s: New.
* ld-aarch64/tls-relax-large-gd-le.d: New.
* ld-aarch64/tls-relax-large-gd-le.s: New.
We want to use disas_aarch64_insn inside GDB to decode instructions, so
this patch exposes it and rename it to aarch64_decode_insn to follow
the conventions of other interfaces.
include/opcode:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64.h (aarch64_decode_insn): Declare it.
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove static. Change
argument insn type to aarch64_insn. Rename to ...
(aarch64_decode_insn): ... it.
(print_insn_aarch64_word): Caller updated.
I happen to see that argument pc is not used inside disas_aarch64_insn
at all. This patch is to remove it.
OK to apply?
opcodes:
2015-10-02 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c (disas_aarch64_insn): Remove argument PC.
(print_insn_aarch64_word): Caller updated.
Since something like ".long foo - ." may be used as pointer, we make
sure that PLT is used if foo is a function defined in a shared library.
bfd/
PR ld/19031
* elf64-x86-64.c (elf_x86_64_check_relocs): Set
pointer_equality_needed for R_X86_64_PC32 reloc in non-code
sections.
ld/testsuite/
PR ld/19031
* ld-x86-64/x86-64.exp: Run PR ld/19031 test.
* ld-x86-64/pr19031.out: New file.
* ld-x86-64/pr19031a.c: Likewise.
* ld-x86-64/pr19031b.S: Likewise.
* ld-x86-64/pr19031c.c: Likewise.
Since the record-btrace target now supports non-stop mode, we no
longer need to force-disable as-ns on x86.
gdb/ChangeLog:
2015-09-30 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_nat_always_non_stop_p): Always return 1.
* x86-linux-nat.c (x86_linux_always_non_stop_p): Delete.
(x86_linux_create_target): Don't install
x86_linux_always_non_stop_p.
This fixes a typo that used strncmp instead of strprefix when
checking for an exec event in a stop reply packet.
gdb/ChangeLog:
* remote.c (remote_parse_stop_reply): Call strprefix instead
of strncmp.
Since something like ".long foo - ." may be used as pointer, we make
sure that PLT is used if foo is a function defined in a shared library.
bfd/
PR ld/19031
* elf32-i386.c (elf_i386_check_relocs): Set
pointer_equality_needed for R_386_PC32 reloc in non-code
sections.
ld/testsuite/
PR ld/19031
* ld-i386/i386.exp: Run PR ld/19031 test.
* ld/testsuite/ld-i386/pr19031.out: New file.
* ld/testsuite/ld-i386/pr19031a.c: Likewise.
* ld/testsuite/ld-i386/pr19031b.S: Likewise.
* ld/testsuite/ld-i386/pr19031c.c: Likewise.
As reported by Ulrich here:
https://sourceware.org/ml/gdb-patches/2015-09/msg00604.html
The system compiler (gcc 4.1) in Centos 5 doesn't like that we cast to a
pointer to a type that doesn't exist. I see no real value in using this
kind iof construct over just using void *. So this patch changes the
tdep_info field to void * and removes the casts. Even in C++, we
should not need an explicit cast when assigning to a void *.
gdb/ChangeLog:
* gdbarch.sh (struct gdbarch_info): Change tdep_info's type to void *.
* gdbarch.h: Regenerate.
* i386-tdep.c (i386_gdbarch_init): Remove cast to
struct gdbarch_tdep_info *.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* ppc-linux-tdep (ppu2spu_sniffer): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Likewise.
