* gdb.base/setshow.c: New file, tests show and set.
* gdb.base/help.exp: Add test for help set|show annotate.
* gdb.base/default.exp: Add test for set|show annotate.
PR 8511
errors unique.
* testsuite/gdb.base/nodebug.exp: Whack out all -g options
explicitly.
* v850-tdep.c (v850_init_extra_frame_info v850_frame_chain): Fix
sign bugs with scanning prologues. Get a little smarter about
calculating the length of uninteresting instructions.
and width commands. This is done elsewhere.
* (gdb_start): Don't call gdb_start_sim here. That's already
done in gdb_load. This fixes lots of failures in default.exp.
(distclean maintainer-clean realclean): No need to remove files
twice. Nuke the duplicates.
* gdb.base/Makefile.in (EXECUTABLES): Add "structs".
* gdb.threads/Makefile.in (distclean maintainer-clean realclean):
Remove config.h along with other config files.
"p func1 ()" and note that rests of tests are skipped.
* gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print func2::coremaker_local".
Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp".
* gdb.base/mips_pro.exp: Restart gdb in this test so it isn't
affected by the previous run test.
* gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for
"print array () ubyte (foo)" and "print/x array () byte (\$i)"
* gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for
"pass int powerset tuple" and "pass modeless int powerset tuple".
* gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for
"real write 4" and "real write 8".
* gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux*
setup_xfails for "print vs1 after tuple assign 2",
"print \$i after tuple assign 2", and
"print vs2 after tuple assign 2".
* lib/gdb.exp (gdb_test): When a gdb aborts, print a more
meaningful error message and return -1 so the caller can
suppress further tests and avoid a cascade of errors.
format for printing version.
* gdb.base/default.exp: Ditto.
* gdb.base/interrupt.exp: Fix problem with cascade of
errors if child process dies while calling a function.
(just-check): Add shared library paths for libstdc++, tk,
tcl, bfd, and opcodes to the environment variable specified
in RPATH_ENVVAR.
* configure.in: Add support to recognize --enable-shared flag
and generate correct value for RPATH_ENVVAR.
* configure: Regenerated with autoconf.
PTHREAD_CREATE_NULL_ARG2): Accomodate old pthreads implementations.
* gdb.threads/pthreads.exp: Try linking with both -lpthread (Solaris)
and -lpthreads (everybody else).
(test_startup): Fail gracefully if threads are not supported.
* gdb.base/nodebug.exp: Add setup_xfail hppa*-*-hpux* for
"p/c array_index("abcdef",2)" when not gcc compiled.
* gdb.base/corefile.exp: Add setup_xfail hppa*-*-hpux* for
"print func2::coremaker_local" when not gcc compiled.
* gdb.base/opaque.exp: Remove setup_xfail hppa*-*-hpux* for
"ptype on opaque struct tagname (statically)",
"ptype on opaque struct tagname (dynamically) 1", and
"ptype on opaque struct tagname (dynamically) 2"
for not compiled with gcc.
* gdb.base/mips_pro.exp: Only do setup_xfail hppa*-*-* for
backtrace when compiled with gcc.
* lib/gdb.exp (runto_main): Return result of "runto main" rather
than always return success.
encapsulate all the steps/nexts done during self test, starting
at main, and makes them less sensitive to optimization issues.
Add "hppa*-*-hpux*" to setup_xfail for "backtrace through
signal handler" test.
* gdb.threads/pthreads.exp: Only run this for native configs.
* gdb.base/signals.exp (test_handle_all_print): Remove code that
increased timeouts, it now makes no difference.
* gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*"
setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8"
tests.
gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail
for "runto test_calls(void)" test.
structures.
* gdb.base/structs.c: C source for test.
Sanitized away until we've got a valid copyright assignment from
Michael Snyder.
Only tested on the PA. I assume other ports will needs some xfails
and other possible testsuite tweakage.
"buffer_full".
* config/nind-gdb.exp (gdb_start): Use "full_buffer", not
"buffer_full".
* config/mips-gdb.exp (gdb_start): Use "full_buffer", not
"buffer_full".
* lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not
"buffer_full".
each signal's status in the output of "handle all print".
* lib/gdb.exp (gdb_test): Document that the pattern must NOT include
the \r\n sequence that immediately precedes the gdb prompt.
* gdb.base/a1-selftest.exp: Save original timeout and restore
after test.
gdb initialization, also report how long dejagnu waited. Restore
old timeout before doing error return. Temporarily increase timeout
by 3 minutes to allow for slow startups over heavy NFS use.
attempting to regenerate it. Eliminate use of a temporary file
and just generate the info file directly. Source it immediately,
for consistency of use.
* gdb.base/corefile.exp: Ditto
* gdb.base/exprs.exp: Ditto.
* gdb.base/funcargs.exp: Ditto.
* gdb.base/langs.exp: Ditto.
* gdb.base/list.exp: Ditto.
* gdb.base/mips_pro.exp: Ditto.
* gdb.base/nodebug.exp: Ditto.
* gdb.base/opaque.exp: Ditto.
* gdb.base/ptype.exp: Ditto.
* gdb.base/scope.exp: Ditto.
* gdb.base/setvar.exp: Ditto.
* gdb.base/signals.exp: Ditto.
* gdb.base/whatis.exp: Ditto.
* gdb.c++/templates.exp: Ditto.
* gdb.c++/virtfunc.exp: Ditto.
* gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide
whether or not to add -lstdc++ to the compile command line args.
break.c.
* gdb.base/callfuncs.exp: Don't run these tests on the h8300.
* gdb.base/default.exp: Add h8300 xfails. Handle messages
from remote-sim.
* gdb.base/exprs.exp: Add h8300 xfails.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/printcmds.exp: Likewise.
* gdb.base/ptype.exp: Likewise.
* gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300. Add
h8300 xfails.
* gdb.base/return.exp: Handle float/double precision problems
on the h8300.
* gdb.base/funcargs.c: Explicitly make last constant argument to
call_after_alloca_subr an unsigned long type.
* gdb.base/return.c: Include stdio.h.
Testsuite work for the H8/300 -gstabs. HMSE.
we always regenerate the coremaker program. Detect special case
where registers cannot be read from core file. Change setup_xfail
for "print func2:coremaker_local" and "backtrace in corefile.exp"
to fail for all i*86 targets.
* gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility
* gdb.c++/templates.exp: Only match on basename of file since
some formats like xcoff don't encode directory information.
* gdb.stabs/weird.exp: Use the right sed script for powerpc
and rs6000 AIX xcoff targets.
* configure.in: Add stabsdirs to configdirs for powerpc-*-aix*.
* configure: Regenerate.
* gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c
here, rather than in distclean.
defined, and use it to compile the test case with -O2. The
native compilation still uses no optimization.
* gdb.base/mips_pro.c: Remove inline assembly code since
it is compiled PIC by default, which results in assembler
warnings that make the testsuite think the compilation
was unsuccessful.
breakpoints (y or n) ". Add "mips-dec-ultrix*" to
setup_xfail for deleting all breakpoints test. Fix various
timeout messages to include "(timeout)".
* gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail
for "p t_float_values2(3.14159,float_val2)".
* gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail
for "continue to call2g" when gcc compiled.
* gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for
"up to foo in langs.exp", "show language at foo in langs.exp",
"show language at cppsub_ in langs.exp", "up to fsub in langs.exp",
and "show language at fsub in langs.exp".
* gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for
"list line 1 in include file", "list message for lines past EOF",
"list function in include file", "list list0.h:foo", and
"list filename:function; nonexistant function".
* gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for
"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)"
and "ptype t_char_array" to be for native cc only.