(mips_pic): Change from int to enum mips_pic_level. Change all
uses (0 becomes NO_PIC, 2 becomes SVR4_PIC).
(load_address): Handle EMBEDDED_PIC.
(macro): Handle EMBEDDED_PIC in all PIC cases.
(md_parse_option): Accept -membedded-pic to use EMBEDDED_PIC. If
OBJ_ELF, accept -KPIC and -call_shared to use SVR4_PIC and accept
-non_shared to use NO_PIC (this is how the Irix 5 assembler
works). Do not permit -G with SVR4_PIC.
(s_abicalls): Warn if -G was used, and force -G 0.
(tc_gen_reloc): Set reloc->addend to 0 for a PC relative reloc for
anything but a.out, not just for ELF. For ECOFF, don't generate a
BFD_RELOC_16_PCREL_S2 reloc unless using EMBEDDED_PIC.
reloc, used in embedded PIC code.
(mips_adjust_reloc_in): Change sanity check to permit new reloc.
(mips_bfd_reloc_type_lookup): Turn BFD_RELOC_16_PCREL_S2 into
MIPS_R_PCREL16.
counting relocs. Set SEC_RELOC flag for any section which has
relocs.
* linker.c (_bfd_default_link_order): Handle bfd_data_link_order.
* linker.c (_bfd_generic_link_add_symbols): Just call
generic_link_add_symbols.
(_bfd_generic_link_add_symbols_collect): New function, like
_bfd_generic_link_add_symbols but also collect constructors and
destructors by name as collect2 does.
(generic_link_add_symbols): New function, like old
_bfd_generic_link_add_symbols but with collect argument.
(generic_link_add_object_symbols): Take collect argument.
(generic_link_check_archive_element_no_collect): New function.
(generic_link_check_archive_element_collect): New function.
(generic_link_check_archive_element): Take collect argument.
(generic_link_add_symbol_list): Take collect argument.
(_bfd_generic_link_add_one_symbol): Rename constructor argument to
collect.
* libbfd-in.h (_bfd_generic_link_add_symbols_collect): Declare.
* libbfd.h: Rebuilt.
for first character in an extended name.
(_bfd_write_archive_contents): If ar_padchar == '/', then use
"//" as the name of the special archive member holding the
extended name table.
support -Ur in the linker.
* linker.c (generic_link_add_symbol_list): Remove bitsize argument
from call to _bfd_generic_link_add_one_symbol.
(_bfd_generic_link_add_one_symbol): Remove bitsize argument.
Don't pass bitsize to constructor call back. Pass BFD_RELOC_CTOR
instead of bitsize to add_to_set call back.
(_bfd_generic_final_link): Account for link_order relocs when
allocating space for relocations. Handle them in link_order loop.
(_bfd_generic_reloc_link_order): New function.
(_bfd_default_link_order): If a reloc_link_order is seen here,
abort.
(_bfd_count_link_order_relocs): New function.
* libbfd-in.h (_bfd_generic_link_add_one_symbol): Remove bitsize
argument from declaration.
(_bfd_generic_reloc_link_order): Declare.
(_bfd_count_link_order_relocs): Declare.
* libbfd.h: Rebuilt.
* aoutx.h (aout_link_add_symbols): Remove bitsize argument from
call to _bfd_generic_link_add_one_symbol.
(NAME(aout,final_link)): Account for link_order relocs when
allocating space for relocations. Handle them after handling all
input BFDs.
(aout_link_reloc_link_order): New function.
* ecoff.c (ecoff_link_add_externals): Remove bitsize argument from
call to _bfd_generic_link_add_one_symbol.
(ecoff_bfd_final_link): Account for link_order relocs when
allocating space for relocations. Handle them in link_order loop.
(ecoff_link_write_external): Set the storage class of a defined
linker created symbol based on the section it is in. Correct
bfd_link_hash_weak case to use .sc rather than .st.
(ecoff_reloc_link_order): New function.
* coff-alpha.c (alpha_bfd_reloc_type_lookup): Handle
BFD_RELOC_CTOR.
* coff-mips.c (mips_bfd_reloc_type_lookup): Likewise.
* ldmain.c (add_to_set): Now takes reloc argument rather than
bitsize. Check config.build_constructors here. If an new hash
table entry is created, mark it as undefined.
(constructor_callback): No longer takes bitsize argument. Pass
BFD_RELOC_CTOR to ldctor_add_set_entry, but first make sure the
BFD backend supports it.
(reloc_overflow): Handle a NULL abfd argument.
(reloc_dangerous, unattached_reloc): Likewise.
* ldctor.c: Include ldmain.h.
(struct set_info): Change bitsize field to reloc.
(ldctor_add_set_entry): Now takes reloc argument rather than
bitsize. Don't bother to check config.build_constructors here.
(ldctor_build_sets): Get the size from the reloc howto. If
generating relocateable output, call lang_add_reloc rather than
lang_add_data.
* ldctor.h (ldctor_add_set_entry): Change declaration to use reloc
instead of bitsize.
* ldlang.h (statement_enum): Add lang_reloc_statement_enum.
(lang_reloc_statement_type): New structure.
(lang_statement_union_type): Add reloc_statement field.
(lang_add_reloc): Declare new function.
* ldlang.c (lang_for_each_statement_worker): Handle
lang_reloc_statement_enum.
(map_input_to_output_sections, print_statement): Likewise.
(lang_size_sections, lang_do_assignments): Likewise.
(print_reloc_statement): New function.
(lang_add_reloc): New function.
* ldwrite.c (build_link_order): Handle lang_reloc_statement_enum.
to add_to_set to reloc. Remove bitsize argument from constructor.
Comment that reloc_overflow, reloc_dangerous and unattached_reloc
must handle NULL pointers for reloc location.
(enum bfd_link_order_type): Add bfd_section_reloc_link_order and
bfd_symbol_reloc_link_order.
(struct bfd_link_order): Add reloc field to union.
(struct bfd_link_order_reloc): Define.
* alpha-tdep.c: Gobs of changes (many imported from mips-tdep) to
improve remote debugging efficiency. Also fixed problems with
doing function calls for programs with no entry points.
* infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of
entry_point_address.
* inferior.h (PC_IN_CALL_DUMMY): ditto.
* mdebugread.c (parse_symbol, parse_procedure, parse_external,
parse_lines): Pass section_offsets info to these routines so that
we can relocate symbol table entries upon readin.
* (psymtab_to_symtab_1): Set symtab->primary to tell
objfile_relocate to do relocations for our symbols.
* (ecoff_relocate_efi): New routine to relocate adr field of PDRs
(which hang off of the symbol table).
* Use prim_record_minimal_symbols_and_info instead of
prim_record_minimal_symbols to supply section info to make minimal
symbol relocations work.
* minsyms.c (prim_record_minimal_symbols_and_info): If section is
-1, try to deduce it from ms_type.
* objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where
appropriate. Handle relocation of MIPS_EFI symbols special. Also,
add code to relocate objfile->sections data structure.
* remote.c (get_offsets): Use new protocol message to acquire
section offsets from the target.
* (remote_wait): Get rid of relocation stuff. That's all handled
by objfile_relocate now.
* config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h.
* config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and
VM_MIN_ADDRESS.
* config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
improve remote debugging efficiency. Also fixed problems with
doing function calls for programs with no entry points.
* infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of
entry_point_address.
* inferior.h (PC_IN_CALL_DUMMY): ditto.
* mdebugread.c (parse_symbol, parse_procedure, parse_external,
parse_lines): Pass section_offsets info to these routines so that
we can relocate symbol table entries upon readin.
* (psymtab_to_symtab_1): Set symtab->primary to tell
objfile_relocate to do relocations for our symbols.
* (ecoff_relocate_efi): New routine to relocate adr field of PDRs
(which hang off of the symbol table).
* Use prim_record_minimal_symbols_and_info instead of
prim_record_minimal_symbols to supply section info to make minimal
symbol relocations work.
* minsyms.c (prim_record_minimal_symbols_and_info): If section is
-1, try to deduce it from ms_type.
* objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where
appropriate. Handle relocation of MIPS_EFI symbols special. Also,
add code to relocate objfile->sections data structure.
* remote.c (get_offsets): Use new protocol message to acquire
section offsets from the target.
* (remote_wait): Get rid of relocation stuff. That's all handled
by objfile_relocate now.
* config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h.
* config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and
VM_MIN_ADDRESS.
* config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
prototype. Change vardiff from int to bfd_signed_vma. Correct
binary search termination condition. When looking for same
section symbol in relocatable file, handle final symbol correctly.
(TM_CLIBS): Define to -lm, the simulator uses the sqrt() function.
* config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so
sparc-tdep.c compiles).
(TARGET_PTR_BIT): Must be a constant now, fix at 64.
som_section_from_subspace_index. Pass in a native SOM symbol.
For executables, iterate through the sections to find out
which contains the symbol's address rather than using the
symbol_info field. (symbol_info has a different meaning for
dynamicly linked executables.)
in output relocations.
(mark_symbols_used_in_relocations): New function. Mark symbols
used in output relocations with BSF_KEEP.
(filter_symbols): Do not strip symbols marked with BSF_KEEP.
(copy_object): Reorder actions. First setup sections, then
build the output symbol table, then copy the section contents.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
subspaces too when writing executables. Never request a negative
bss size. Fixes some problems with demand paged executables,
still having problems with pure executables and shared executables.
containing all the private section information which needs
to be copied from input section to output section during
objcopy or strip.
(som_section_data_struct): Remove several fields now in
som_copyable_section_data_struct. Make the space and
subspace dictionaries be pointers (to save space when
only reading objects).
* som.c (bfd_som_set_section_attributes): Now returns a boolean;
some references changed. Allocate a copyable data stucture if
none exists. Store info into the copyable data structure.
(bfd_som_set_subsection_attributes): Likewise.
(som_is_space, som_is_subspace, som_is_container): New functions.
Use these instead of directly accessing private data.
(som_prep_headers): Allocate space and subspace headers here.
Fill in some fields in the space/subspace headers from the
copyable data.
(som_bfd_copy_private_section_data): Only copy the stuff
that we really need to make objcopy and strip work. Allocate
the copy_data structure for the output bfd before copying.
bfd_zalloc for rawptr, because later on we may call free, not
bfd_release, on it.
* bfd.c (struct _bfd): Add cisco_core_struct to tdata union.
* libbfd.c (bfd_read, bfd_seek): Add comments regarding errors.
* cisco-core.c: New file.
* Makfile.in: Change accordingly.
* bfd-in2.h: Rebuilt.
