This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
When a shared library appears within --start-group/--end-group ld may
only discover a need for loading the library on the second or
subsequent pass over archive libraries, as more objects are extracted.
ld/
PR 17068
* ldlang.c (load_symbols): Always check flags.reload.
(open_input_bfds): Always reload --as-needed shared libraries,
not just when rescanning.
* ldlang.h (struct lang_input_statement_flags): Update reload comment.
* plugin.c (plugin_should_reload): Assume shared library arg.
* plugin.h (plugin_should_reload): Update comment.
ld/testsuite
* ld-elf/pr17068.s: New.
* ld-elf/pr17068a.s: New.
* ld-elf/pr17068b.s: New.
* ld-elf/pr17068c.s: New.
* ld-elf/pr17068d.s: New.
* ld-elf/pr17068e.s: New.
* ld-elf/pr17068ez.s: New.
* ld-elf/elf.exp: Run new test.
Initial patch to enable gold aarch64 backend.
This patch is just a skeleton which almost does nothing.
It does not support ILP32 now.
gold/ChangeLog:
* aarch64.cc: New file
* Makefile.am (TARGETSOURCES): Add aarch64.cc
(ALL_TARGETOBJS): Add aarch64.$(OBJEXT)
* Makefile.in: Regenerate.
* configure.tgt: Add entries for aarch64*.
* configure.ac: Likewise.
* configure: Likewise.
elfcpp/ChangeLog:
* aarch64.h: New file. New enums for aarch64-elf64 relocations.
* elfcpp.h (EM_AARCH64, SHT_AARCH64_ATTRIBUTES, PT_AARCH64_ARCHEXT,
PT_AARCH64_UNWIND): New enum constant.
does in a way, because the arm/aarch64 branch instruction is the
same as powerpc's, but the target triplet pattern is not there.
In summary, the testcase fails to locate the branch offset and causes
a failure and the early termination of the test.
The following patch adds a separate conditional block for powerpc (to keep
things organized), allowing the testcase to continue.
2014-07-02 Luis Machado <lgustavo@codesourcery.com>
* gdb.trace/entry-values.exp: Handle powerpc-specific branch
instruction.
doesn't always mean you need to define a function symbol on plt code.
If all references are in read-write sections, then using dynamic relocs
is OK.
bfd/
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol): Clear
pointer_equality_needed when !readonly_dynrelocs.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol): Likewise.
ld/testsuite/
* ld-powerpc/ambiguousv1.d: Match symbol table too.
* ld-powerpc/ambiguousv2.d: Likewise.
* ld-powerpc/ambiguousv1b.d: New.
* ld-powerpc/ambiguousv2b.d: New.
* ld-powerpc/powerpc.exp: Run new tests.
gdb/proc-service.c includes several libthread_db callbacks that do not
exist in gdb/gdbserver/proc-service.c. Other than in proc_service.h,
there is no reference to any of these callbacks in any revision of
nptl_db or linuxthreads_db in glibc's git repo so it seems likely that
these functions have never been called. This commit removes them.
gdb/
2014-07-02 Gary Benson <gbenson@redhat.com>
* proc-service.c (ps_xfer_memory): Update comment.
(ps_pstop): Remove unused function.
(ps_pcontinue): Likewise.
(ps_lstop): Likewise.
(ps_lcontinue): Likewise.
(ps_lgetxregsize): Likewise.
(ps_lgetxregs): Likewise.
(ps_lsetxregs): Likewise.
(ps_plog): Likewise.
(ps_ptread): Likewise.
(ps_ptwrite): Likewise.
If we can dlopen an object then DF_STATIC_TLS is relevant.
* elf32-ppc.c (ppc_elf_check_relocs): Set DF_STATIC_TLS for PIEs too.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
read_tag_const_type propagates the cv-qualifier to the array element type,
but read_tag_volatile_type didn't. Make sure that both cv-qualifiers that
apply to array types are handled the same.
gdb/ChangeLog
* dwarf2read.c (add_array_cv_type): New function.
(read_tag_const_type): Call add_array_cv_type for TYPE_CODE_ARRAY.
(read_tag_volatile_type): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
vulture, vilify, villar): New volatile array constants.
(vindictive, vegetation): New const volatile array constants.
* gdb.base/volatile.exp: Test volatile and const volatile array
types.
This patch changes a few more spots to use either cmd_sfunc_ftype or
cmd_cfunc_ftype, as appropriate. This is a bit cleaner.
Tested by rebuilding.
2014-07-01 Tom Tromey <tromey@redhat.com>
* breakpoint.c (add_catch_command): Use cmd_sfunc_ftype.
* breakpoint.h (add_catch_command): Use cmd_sfunc_ftype.
* cli/cli-decode.c (cmd_cfunc_eq, add_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, add_info, add_com): Use cmd_cfunc_ftype.
* command.h (cmd_cfunc_ftype): Move earlier.
(add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, cmd_cfunc_eq)
(add_com, add_info): Use cmd_cfunc_ftype.
for better packing. Removes a field and a flag that are never set.
bfd/
* bfd.c (struct bfd): Reorganise for better packing. Delete
"ifd" field. Make "format", "direction" and "flags" bitfields.
(HAS_LOAD_PAGE): Delete, renumber following flags.
* bfd-in2.h: Regenerate.
* coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs.
binutils/
* objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
The undefined function symbols (with non-zero value) on global entry
stubs are discarded by objdump when disassembling, so give objdump
another symbol to mark the stubs.
Also fixes a couple of bugs:
- entry_section was set to .opd for ELFv2, which meant a hard error
rather than a warning when _start wasn't defined.
- global entry stubs were not built if they were the only type of
stub in an executable.
bfd/
* elf64-ppc.c (ppc_stub_type): Add ppc_stub_global_entry.
(struct ppc_link_hash_table): Increase size of stub_count array.
(build_global_entry_stubs): Emit symbol on global entry stub.
(ppc64_elf_build_stubs): NULL check htab->brlt. Add global entry
stub stats.
ld/
* emultempl/ppc64elf.em (stub_added): Delete.
(gld${EMULATION_NAME}_finish): Call ppc64_elf_build_stubs even when
none of the usual stubs have been added. Only change entry_section
for ELFv1.
sys/param.h on recent versions of powerpc glibc ends up including
asm/elf.h via asm/sigcontex.h. asm/elf.h defines R_PPC_* and R_PPC64_*
macros, which clash with our include/elf/ppc.h and include/elf/ppc64.h.
It turns out that no current source uses LD_PATHMAX, so there is no
need for limits.h or sys/param.h, except for one occurrence of UINT_MAX.
I don't have a quarrel with limits.h, but it seems unnecessary just
for UINT_MAX.
* sysdep.h: Don't include limits.h and sys/param.h. Don't
include unistd.h twice.
(LD_PATHMAX): Don't define.
* ldlang.c (lang_common): Don't use UINT_MAX.
Makes the ld srec tests pass. Uses a horrible scan through symbols to
find ELF fields for symbol definitions, but the generic linker doesn't
offer anything better. Might be slow. Anyway, sane people will link
to ELF output then objcopy to convert formats.
* elf64-ppc.c (abiversion, set_abiversion): Move earlier.
(ppc64_elf_branch_reloc): Adjust addend for ELFv2 local offset.
(ppc64_elf_set_toc): Set ".TOC." symbol value when using
generic linker.
(ppc64_elf_relocate_section): Disable ELFv2 function entry
optimisation when --traditional-format.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
This constifies the parameters to search_symbols and fixes up the
fallout.
Tested by rebuilding.
2014-06-30 Tom Tromey <tromey@redhat.com>
* symtab.c (operator_chars): Make parameters and return type
const.
(file_matches): Make "files" const.
(struct search_symbols_data) <files>: Now const.
(search_symbols): Make "regexp" and "files" parameters const.
Update.
(symtab_symbol_info): Remove cast.
(rbreak_command): Update.
* symtab.h (search_symbols): Update.
The test case "watchpoint-reuse-slot.exp" yields a lot of failures on
s390/s390x: all instances of awatch, rwatch, and hbreak are performed
even though they aren't supported on these targets. This is because
the test case ignores non-support error messages when probing for
support of these commands, like:
(gdb) rwatch buf.byte[0]
Target does not support this type of hardware watchpoint.
The patch adds handling for this case in the appropriate
gdb_test_multiple invocations.
gdb/testsuite/
* gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
target lacks support for awatch, rwatch, or hbreak.
* config/obj-macho.c (obj_mach_o_set_symbol_qualifier): Don't set
SYM_MACHO_FIELDS_NOT_VALIDATED after reporting an error.
(obj_mach_o_frob_label): Avoid cascading errors.
(obj_mach_o_frob_symbol): Don't set SYM_MACHO_FIELDS_NOT_VALIDATED.
This patch is to add ptid into dummy_frame and extend frame_id to
dummy_frame_id (which has a ptid field). With this change, GDB uses
dummy_frame_id (thread ptid and frame_id) to find the dummy frames.
Currently, dummy frames are looked up by frame_id, which isn't
accurate in non-stop or multi-process mode. The test case
gdb.multi/dummy-frame-restore.exp shows the problem and this patch can
fix it.
Test dummy-frame-restore.exp makes two inferiors stop at
different functions, say, inferior 1 stops at f1 while inferior 2
stops at f2. Set a breakpoint to a function, do the inferior call
in two inferiors, and GDB has two dummy frames of the same frame_id.
When the inferior call is finished, GDB will look up a dummy frame
from its stack/list and restore the inferior's regcache. Two
inferiors are finished in different orders, the inferiors' states are
restored differently, which is wrong. Running dummy-frame-restore.exp
under un-patched GDB, we'll get two fails:
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
With this patch applied, GDB will choose the correct dummy_frame to
restore for a given inferior, because ptid is considered when looking up
dummy frames. Two fails above are fixed.
Regression tested on x86_64-linux, both native and gdbserver.
gdb:
2014-06-27 Yao Qi <yao@codesourcery.com>
* breakpoint.c (check_longjmp_breakpoint_for_call_dummy):
Change parameter type to 'struct thread_info *'. Caller
updated.
* breakpoint.h (check_longjmp_breakpoint_for_call_dummy):
Update declaration.
* dummy-frame.c (struct dummy_frame_id): New.
(dummy_frame_id_eq): New function.
(struct dummy_frame) <id>: Change its type to 'struct
dummy_frame_id'.
(dummy_frame_push): Add parameter ptid and save it in
dummy_frame_id.
(pop_dummy_frame_bpt): Use ptid of dummy_frame instead of
inferior_ptid.
(pop_dummy_frame): Assert that the ptid of dummy_frame equals
to inferior_ptid.
(lookup_dummy_frame): Change parameter type to 'struct
dummy_frame_id *'. Callers updated. Call dummy_frame_id_eq
instead of frame_id_eq.
(dummy_frame_pop): Add parameter ptid. Callers updated.
Update comments. Compose dummy_frame_id and pass it to
lookup_dummy_frame.
(dummy_frame_discard): Add parameter ptid.
(dummy_frame_sniffer): Compose dummy_frame_id and call
dummy_frame_id_eq instead of frame_id_eq.
(fprint_dummy_frames): Print ptid.
* dummy-frame.h: Remove comments.
(dummy_frame_push): Add ptid in declaration.
(dummy_frame_pop, dummy_frame_discard): Likewise.
gdb/testsuite:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
gdb/doc:
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Maintenance Commands): Update the output of
'maint print dummy-frames' command.
This is a trivial patch to make error_no_arg take a const argument.
2014-06-26 Tom Tromey <tromey@redhat.com>
* cli/cli-cmds.c (error_no_arg): Make "why" const.
* command.h (error_no_arg): Update.
This changes do_set_command and do_show_command to take const
arguments.
2014-06-26 Tom Tromey <tromey@redhat.com>
* cli/cli-setshow.c (do_set_command): Make "arg" const.
(do_show_command): Make "arg" const.
* cli/cli-setshow.h (do_set_command, do_show_command): Update.
This makes arguments to to_get_bookmark and to_goto_bookmark const and
fixes the fallout. Tested by rebuilding. The only thing of note is
the new split between cmd_record_goto and record_goto -- basically
separating the CLI function from a new internal API, to allow const
propagation.
2014-06-26 Tom Tromey <tromey@redhat.com>
* record-full.c (record_full_get_bookmark): Make "args" const.
(record_full_goto_bookmark): Make "raw_bookmark" const.
* record.c (record_goto): New function.
(cmd_record_goto): Use it. Now static.
* record.h (record_goto): Declare.
(cmd_record_goto): Remove declaration.
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_get_bookmark,
to_goto_bookmark>: Make parameter const.
This makes the argument to the target_ops to_load method "const", and
fixes up the fallout. Tested by rebuilding all the affected files.
2014-06-26 Tom Tromey <tromey@redhat.com>
* defs.h (generic_load): Update.
* m32r-rom.c (m32r_load_gen): Make "filename" const.
* monitor.c (monitor_load): Make "args" const.
* remote-m32r-sdi.c (m32r_load): Make "args" const.
* remote-mips.c (mips_load_srec, pmon_load_fast): Make "args"
const.
(mips_load): Make "file" const.
* remote-sim.c (gdbsim_load): Make "args" const.
* remote.c (remote_load): Make "name" const.
* symfile.c (generic_load): Make "args" const.
* target-delegates.c: Rebuild.
* target.c (target_load): Make "arg" const.
(debug_to_load): Make "args" const.
* target.h (struct target_ops) <to_load>: Make parameter const.
(target_load): Update.
This fixes a regression that Jan pointed out.
The bug is that some names were allocated by dwarf2read on the objfile
obstack, but then passed to SYMBOL_SET_NAMES with copy_name=0. This
violates the invariant that the names must have a lifetime tied to the
lifetime of the BFD.
The fix is to allocate names on the per-BFD obstack.
I looked at all callers, direct or indirect, of SYMBOL_SET_NAMES that
pass copy_name=0. Note that only the ELF and DWARF readers do this;
other symbol readers were never updated (and perhaps cannot be,
depending on the details of the formats). This is why the patch is
relatively small.
Built and regtested on x86-64 Fedora 20.
2014-06-26 Tom Tromey <tromey@redhat.com>
PR symtab/16902:
* dwarf2read.c (fixup_go_packaging, dwarf2_compute_name)
(dwarf2_physname, read_partial_die)
(guess_partial_die_structure_name, fixup_partial_die)
(guess_full_die_structure_name, anonymous_struct_prefix)
(dwarf2_name): Use per-BFD obstack.
* strings.c: Add -w/--include-all-whitespace option to include any
whitespace character in the displayed strings.
* NEWS: Mention the new feature.
* doc/binutils.texi (strings): Document the new command line
option.
inserted. This is for compatibility with other, non-GNU tools. Deterministic
binaries can still be created by using the new --no-insert-timestamp command line
option.
* emultempl/pe.em: Initialise insert_timestamp to true.
Add a --no-insert-timestamp command line option.
* emultempl/pep.em: Likewise.
* ld.texinfo: Document that --insert-timestamp is enabled by
default and that it now has an inverse command line option.
* NEWS: Mention the new behaviour.
dummy_frame_sniffer has two local variables dummyframe and this_id,
but they are only used in the if block below. This patch is to move
them into the inner block.
gdb:
2014-06-26 Yao Qi <yao@codesourcery.com>
* dummy-frame.c (dummy_frame_sniffer): Move local variables
dummyframe and this_id into inner block below.
information, specifically a DW_AT_MIPS_linkage_name attribute that has a numeric
value rather than a string value.
PR binutils/16949
* dwarf2.c (is_str_attr): New function.
(find_abstract_instance_name): Use it to determine when an
attribute has a string value.
When I read the code, I happen to see this:
signal_pass = (unsigned char *)
xmalloc (sizeof (signal_program[0]) * numsigs);
^^^^^^^^^^^^^^
It is a typo, and this patch is to fix it.
gdb:
2014-06-26 Yao Qi <yao@codesourcery.com>
* infrun.c (_initialize_infrun): Replace "signal_program[0]"
with "signal_pass[0]" in the initialization of signal_pass.
* Makefile.am (ALL_EMULATION_SOURCES): Move ei386pep.c from
here...
(ALL_64_EMULATION_SOURCES): ... to here.
(ALL_EMUL_EXTRA_OFILES): Move pep-dll.o from here...
(ALL_64_EMUL_EXTRA_OFILES): New. ... to here.
* configure.in (EMUL_EXTRA_OFILES): Include
ALL_64_EMUL_EXTRA_OFILES when making a 64-bit enabled build.
* Makefile.in: Regenerate.
* configure: Regenerate.
Addition of DF_STATIC_TLS in eea6dad2 results in the addition of
flags to the dynamic section, which in turn changes these addresses.
Fix them up to match their new positions.
ld/testsuite/Changelog:
2014-06-24 Kyle McMartin <kyle@redhat.com>
* ld-arm/tls-gdierelax2.d: Fix expected offsets.
When generating a core file using the "generate-core-file" command while
replaying with the btrace record target, we won't be able to access all
registers and all memory. This leads to the following assertion:
gdb/regcache.c:1034: internal-error: regcache_raw_supply: Assertion `regnum >= 0 && regnum < regcache->descr->nr_raw_registers' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.btrace/gcore.exp: generate-core-file core (GDB internal error)
Resyncing due to internal error.
Pretend that we are not replaying while generating a core file. This will
forward fetch and store registers as well as xfer memory calls to the target
beneath.
gdb/
* record-btrace.c (record_btrace_generating_corefile)
(record_btrace_prepare_to_generate_core)
(record_btrace_done_generating_core): New.
(record_btrace_xfer_partial, record_btrace_fetch_registers)
(record_btrace_store_registers, record_btrace_prepare_to_store):
Forward request when generating a core file.
(record_btrace_open): Set record_btrace_generating_corefile to zero.
(init_record_btrace_ops): Set to_prepare_to_generate_core and
to_done_generating_core.
testsuite/
* gdb.btrace/gcore.exp: New.
