(thumb-*-elf): Handle.
* configure: Regenerate.
* read.c (stringer): Fix typo in comment.
* write.c (fixup_segment): Don't add symbol value to addend if
TC_ARM and OBJ_ELF.
* config/tc-arm.c (md_section_align): Don't align dwarf debug
sections.
(tc_gen_reloc): Always set the reloc addend to fixp->fx_offset
for OBJ_ELF.
Thu Jul 30 21:38:43 1998 Frank Ch. Eigler <fche@cygnus.com>
* config/tc-d30v.c ({cur,prev}_left_kills_right_p): New variables.
(write_2_short): Emit warning if new flag is set.
(do_assemble): Set flags if left instruction is one of special
"right-instruction-killer" type.
* config/tc-sparc.c (log2): New static function.
(s_reserve): Use log2 to convert alignment before calling
record_alignment.
(s_common): Use log2 to convert alignment before calling
record_alignment and frag_align.
(sparc_cons_align): Use log2.
* config/tc-i386.c (i386_operand): Don't set the size of an
immediate address based solely on the suffix and the mode.
* config/tc-i386.c (md_assemble): Add assertion to make sure
overlap2 does not set Imm.
* config/tc-i386.c (space_chars): Remove. The scrubber converts
sequences of whitespace to a single space.
(is_space_chars): Just compare with space.
(md_begin): Don't initialize space_chars.
(md_assemble): Just skip a single whitespace character.
(i386_operand): Rewrite base-index parsing to use new
parse_register, and to skip white space. Skip white space in a
number of other places too. Don't give error message if
parse_register fails.
(parse_register): Change reg_string parameter to be non-const.
Add end_op parameter. Skip white space after the `%', and return
end of register string. Give error message here rather than
caller.
* obj-vms.c: Add C++ support with ctors/dtors sections. Add weak
symbol definitions.
(Ctors_Symbols, Dtors_Symbols): New symbol chains.
(ps_CTORS, ps_DTORS): New section types.
(vms_fixup_xtors_section): New function
(Ctors_Psect, Dtors_Psect): Define.
(IS_GXX_XTOR): Define
(global_symbol_directory): Change check of gxx_bug_fixed to 0.
Filter static constructors/destructors and add to
Ctors_Symbols/Dtors_Symbols chain.
(vms_write_object_file): Write Ctors_Symbols/Dtors_Symbols to
appropriate section.
* tc-alpha.h (TARGET_FORMAT): Rename "evax-alpha" to "vms-alpha".
* makefile.vms: Merge vax/vms support.
(md_pseudo_table): Add pseudo-ops to set the current machine type.
(md_begin): Default to mn10300 mode.
(md_assemble): Only accept instructions for the core mn10300
chip and the active machine type.
as synonyms for "rN" registers.
(xr_registers): Add mcrh, mcrl, mcvf, mdrq and sp as synonyms
for "xrN" registers.
(md_assemble): Fix typo computing the size of relocations.
* config/tc-mn10300.c (r_registers): Add missing registers.
(xr_registers): New set of registers.
(xr_register_name): New function.
(md_assemble): Handle XRREG and PLUS operands. Tweak handling of
RREG operand insertion. Handle new D6 and D7 instruction formats.
end-sanitize-am33
* config/tc-mn10300.c (mn10300_insert_operand): Do not hardcode the
shift amount for a repeated operand. The shift amount for the
repeated copy comes from the size of the operand.
* config/tc-i386.h: Change Data16 to Size16, Data32 to Size32,
IgnoreDataSize to IgnoreSize as they are used for address size as
well as data size.
* config/tc-i386.c: Likewise. Add code to reject addr32/data32 in
32-bit mode, similarly addr16/data16 and variants.
* config/tc-i386.c: REPNE renamed to REPNE_PREFIX_OPCODE, and
likewise for REPE.
* config/tc-i386.c (reloc): Add braces.
* config/tc-i386.c (struct _i386_insn): Rename bi to sib to be
consistent with Intel naming.
* config/tc-i386.h (base_index_byte): Rename to sib_byte. Don't
use bitfields in sib_byte.
(modrm_byte): Don't use bitfields here either.
* config/tc-i386.c (current_templates): Add const.
(parse_register): Add const to return, param, and char *s.
(i386_operand): Add const to reg_entry *r.
* config/tc-i386.h (templates): Add const to start, end.
Inspired by code for 16 bit gas support from Martynas Kunigelis
<martynas@nm3.ktu.lt>:
* config/tc-i386.c (md_assemble): Add full support for 16 bit
modrm, and Jump, JumpByte, JumpDword, JumpInterSegment insns.
(uses_mem_addrmode): Remove.
(md_estimate_size_before_relax): Add support here too.
(md_relax_table): Rewrite interface to md_relax for 16 bit
support.
(BYTE, WORD, DWORD, UNKNOWN_SIZE): Remove.
(opcode_suffix_to_type): Remove.
(CODE16, SMALL, SMALL16, BIG, BIG16): Define.
(SIZE_FROM_RELAX_STATE): Modify to suit above.
(md_convert_frag): Likewise.
(i386_operand): Add support for 16 bit base/index regs,
immediates, and displacements. Remove some unnecessary casts, and
localise end_of_operand_string, displacement_string_start,
displacement_string_end variables. Add GCC_ASM_O_HACK.
* config/tc-i386.h (NO_BASE_REGISTER_16): Define.
* config/tc-i386.c (prefix_hash): Remove.
(md_begin): Rewrite without obstacks. Remove prefix hash table
handling. Rewrite lexical table handling.
(i386_print_statistics): Don't print prefix statistics.
(md_assemble): Rewrite instruction parser so that line is not
converted to lower case. Don't do a hash_find for prefixes,
instead recognise them via opcode modifier.
(expecting_operand, paren_not_balanced): Localise variables.
* config/tc-i386.h (IsPrefix): Define.
(prefix_entry): Remove.
* config/tc-i386.h (PREFIX_SEPERATOR): Don't define.
* config/tc-i386.c (PREFIX_SEPARATOR): Define here instead, using
'\\' in case where comment_chars contains '/'.
* config/tc-i386.c (MATCH): Ensure given operand and template
match for JumpAbsolute. Makes e.g. `ljmp table(%ebx)' invalid;
you must write `ljmp *table(%ebx)'.
From H.J. Lu <hjl@gnu.org>:
* config/tc-i386.c (BFD_RELOC_16, BFD_RELOC_16_PCREL): Define
as 0 ifndef BFD_ASSEMBLER.
(md_assemble): Allow immediate operands without suffix or
other reg operand to default in size to the current code size.
* config/tc-i386.c (mode_from_disp_size): Disp16 is mode 2.
(i386_operand): Simplify checks for valid base/index combinations.
Disallow `in 4(%dx),%al'.
* config/tc-i386.c (struct _i386_insn): Make regs, base_reg, and
index_reg const.
(add_prefix): Change parameter from char to int.
* config/tc-i386.h (Ugh): Define opcode modifier.
* config/tc-i386.c (md_assemble): Print warnings for Ugh insns.
* config/tc-i386.c (md_assemble): Rewrite MATCH and
CONSISTENT_REGISTER_MATCH macros to check register types more
thoroughly. Check for illegal suffix/operand combinations
when matching insns with operands. Handle new `s' suffix, and
associated FloatMF opcode modifier for float insns with memory
operands.
* config/tc-i386.h (FloatMF): Define new opcode modifier.
(No_sSuf, No_bSuf, No_wSuf, No_lSuf): Likewise.
(SHORT_OPCODE_SUFFIX, LONG_OPCODE_SUFFIX): Define.
* config/tc-i386.c: Rename WORD_PREFIX_OPCODE to
DATA_PREFIX_OPCODE throughout.
* config/tc-i386.c (REGISTER_WARNINGS): Define.
(md_assemble): Rewrite suffix/register operand checking code to be
more thorough. Remove Abs8,16,32. Change occurrences of Mem to
AnyMem, the better to grep.
(pi): Remove Abs.
(i386_operand): Don't set Mem bits in i.types[this_operand] when
given a memory operand. Don't set Abs bits either.
(type_names): Remove Mem*, Abs*.
* config/tc-i386.h (Mem8, Mem16, Mem32, Abs8, Abs16, Abs32): Don't
define opcode_modifiers as these cases are handled by Disp8,
Disp16, Disp32 and suffix checks.
(COMES_IN_BOTH_DIRECTIONS): Remove.
(FloatR): Define. It's OK to share the bit with ReverseRegRegmem.
* config/tc-i386.c (md_assemble): Don't emit operand size prefix
if IgnoreDataSize modifier given. Remove ShortformW modifier
test. Add test for ShortForm in W base_opcode modification.
Merge Seg2ShortForm and Seg3ShortForm code.
* config/tc-i386.h (ShortFormW): Remove.
(IgnoreDataSize): Define.
* config/tc-i386.c (END_STRING_AND_SAVE): Protect arguments of
macros and enclose in do while(0).
(RESTORE_END_STRING): Likewise.
(md_assemble): Add one to printed operand number so we start
from 1 not 0. Add some more gettext invocations.
(i386_operand): Fix `%%s' -> `%%%s'. Inc printed operand
number here too.
* config/tc-i386.h (WAIT_PREFIX, LOCKREP_PREFIX, ADDR_PREFIX,
DATA_PREFIX, SEG_PREFIX): Define.
* config/tc-i386.c (struct _i386_insn): Remove wait_prefix field.
(check_prefix): Remove function.
(add_prefix): New function. Add prefix to i.prefix as well as
doing checks.
(md_assemble): Changes for add_prefix. Remove hack for wait
prefix, instead always output prefixes in fixed order. Test
for jcxz/loop when selecting between word & dword operations,
and add address size prefix rather than operand size prefix.
Remove operand -> address size hack when emitting jcxz/loop.
(i386_operand): Remove O_Absent check as it's done in expr.
