On some targets each of the assignments "i = 0" in the C source for
"breakpoint-in-ro-region.exp" are compiled to a single instruction.
Then each "si" stops at the beginning of the next source line. But on
some other targets (like s390) such an assignment compiles to multiple
instructions. Then "si" may stop in mid-line, and GDB displays the PC
address in addition to the source line number. This was not considered
by the regexp for this case.
gdb/testsuite/ChangeLog:
* gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
regexps for GDB's current line display, accept a hex address
preceding the line number.
For the "multiple targets" test in catch-syscall.exp, set the 'arch1'
variable to a valid string.
gdb/testsuite/ChangeLog:
* gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
the 'arch1' variable for "s390*-linux*" targets.
In some scenarios, GDB or GDBserver can be spawned with input _not_
connected to a tty, and then tests that rely on stdio fail with
timeouts, because the inferior's stdout and stderr streams end up
fully buffered.
See discussion here:
https://sourceware.org/ml/gdb-patches/2015-02/msg00809.html
We have a hack in place that works around this for Windows testing,
that forces every test program to link with an .o file that does
(lib/set_unbuffered_mode.c):
static int __gdb_set_unbuffered_output (void) __attribute__ ((constructor));
static int
__gdb_set_unbuffered_output (void)
{
setvbuf (stdout, NULL, _IONBF, BUFSIZ);
setvbuf (stderr, NULL, _IONBF, BUFSIZ);
}
That's a bit hacky; it ends up done for _all_ tests.
This patch adds a way to do this unbuffering explicitly from the test
code itself, so it is done only when necessary, and for all
targets/hosts. For starters, it adjusts gdb.base/interrupt.c to use
it.
Tested on x86_64 Fedora 20, native, and against a remote gdbserver
board file that connects to the target with ssh, with and without -t
(create pty).
gdb/testsuite/
2015-02-27 Pedro Alves <palves@redhat.com>
* lib/unbuffer_output.c: New file.
* gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
As far as I know, "catch syscall" is supported on hppa*-hp-hpux*, but
the test catch-syscall.exp is skipped on this target by mistake. This
patch is to fix it. However, I don't have a hpux machine to test.
gdb/testsuite:
2015-02-27 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux*
target.
When doing finish in a function, if gdb fails to return a value, gdb
also fails at printing the value type if this type is a struct.
For example :
(gdb) fin
....
Value returned has type: . Cannot determine contents
This patch fixes this by calling type_to_string to print the type
so that we can support these types.
This patch returns the following example output :
(gdb) fin
....
Value returned has type: struct test. Cannot determine contents
Also, this patch modifies structs.exp to check that we return the
correct type.
gdb/ChangeLog:
* gdb/infcmd.c (print_return_value): use type_to_string to print type.
gdb/testsuite/ChangeLog:
* gdb.base/structs.exp: Check for correct struct on finish.
Fixes:
> gdb compile failed, /gdb/testsuite/gdb.base/info-os.c: In function 'main':
> /gdb/testsuite/gdb.base/info-os.c:65:3: warning: implicit declaration of function 'atexit' [-Wimplicit-function-declaration]
> atexit (ipc_cleanup);
> ^
> FAIL: gdb.base/info-os.exp: cannot compile test program
with recent GCCs.
gdb/testsuite/ChangeLog:
2015-02-23 Pedro Alves <palves@redhat.com>
* gdb.base/info-os.c: Include stdlib.h.
Commit 6f9b8491 (Adapt `info probes' to support printing probes of
different types.) added a new type column to "info probes". That
caused a solib-corrupted.exp regression:
~~~~~~~~~~~~~~~~~~~~~
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/solib-corrupted.exp ...
FAIL: gdb.base/solib-corrupted.exp: corrupted list
=== gdb Summary ===
# of expected passes 2
# of unexpected failures 1
~~~~~~~~~~~~~~~~~~~~~
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.base/solib-corrupted.exp: Expect "stap" as first column of
info probes.
When gdb creates a dummy frame to execute a function in the inferior,
the process may generate a SIGSEGV, SIGTRAP or SIGILL because the stack
is non executable. If the signal handler set in gdb has option print
or stop enabled for these signals gdb handles this correctly.
However, in the case of noprint and nostop the signal is short-circuited
and the inferior process is sent the signal directly. This causes the
inferior to crash because of gdb.
This patch adds a check for SIGSEGV, SIGTRAP or SIGILL so that these
signals are sent to gdb rather than short-circuited in the inferior.
gdb then handles them properly and the inferior process does not
crash.
This patch also fixes the same behavior in gdbserver.
Also added a small testcase to test the issue called catch-gdb-caused-signals.
This applies to Linux only, tested on Linux.
gdb/ChangeLog:
PR breakpoints/16812
* linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
* nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
* nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
gdb/gdbserver/ChangeLog:
PR breakpoints/16812
* linux-low.c (wstatus_maybe_breakpoint): Remove.
(linux_low_filter_event): Update wstatus_maybe_breakpoint name.
(linux_wait_1): Report SIGTRAP,SIGILL,SIGSEGV.
gdb/testsuite/ChangeLog:
PR breakpoints/16812
* gdb.base/catch-gdb-caused-signals.c: New file.
* gdb.base/catch-gdb-caused-signals.exp: New file.
This patch adds some simple tests testing the support for DTrace USDT
probes. The testsuite will be skipped as unsupported in case the user
does not have DTrace installed on her system. The tests included in the
test suite test breakpointing on DTrace probes, enabling and disabling
probes, printing of probe arguments of several types and also
breakpointing on several probes with the same name.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* lib/dtrace.exp: New file.
* gdb.base/dtrace-probe.exp: Likewise.
* gdb.base/dtrace-probe.d: Likewise.
* gdb.base/dtrace-probe.c: Likewise.
* lib/pdtrace.in: Likewise.
* configure.ac: Output variables with the transformed names of
the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
* configure: Regenerated.
This patch moves the `compute_probe_arg' and `compile_probe_arg' functions
from stap-probe.c to probe.c. The rationale is that it is reasonable to
assume that all backends will provide the `$_probe_argN' convenience
variables, and that the user must be placed on the PC of the probe when
requesting that information. The value and type of the argument can still be
determined by the probe backend via the `pops->evaluate_probe_argument' and
`pops->compile_to_ax' handlers.
Note that a test in gdb.base/stap-probe.exp had to be adjusted because the "No
SystemTap probe at PC" messages are now "No probe at PC".
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* probe.c (compute_probe_arg): Moved from stap-probe.c
(compile_probe_arg): Likewise.
(probe_funcs): Likewise.
* stap-probe.c (compute_probe_arg): Moved to probe.c.
(compile_probe_arg): Likewise.
(probe_funcs): Likewise.
gdb/testsuite/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
expected message when trying to access $_probe_* convenience
variables while not on a probe.
Typing "enable count" by itself crashes GDB. Also, if you omit the
breakpoint number/range, the error message is not very clear:
(gdb) enable count 2
warning: bad breakpoint number at or near ''
(gdb) enable count
Segmentation fault (core dumped)
With this patch, the error messages are slightly more helpful:
(gdb) enable count 2
Argument required (one or more breakpoint numbers).
(gdb) enable count
Argument required (hit count).
gdb/ChangeLog:
PR gdb/15678
* breakpoint.c (map_breakpoint_numbers): Check for empty args
string.
(enable_count_command): Check args for NULL value.
gdb/testsuite/ChangeLog:
PR gdb/15678
* gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.
The buildbot shows that some machines FAIL this test frequently.
E.g.: https://sourceware.org/ml/gdb-testers/2015-q1/msg00997.html
If I stress my machine, I can sometimes see it fail too.
Bumping the 200 limit and tweaking the test to show the step count, I
get:
...
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
--> FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times <--
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 9 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
...
Thinking that this might be a problem of SIGTERM reaching GDB, but
then the event loop taking too long to handle it, I hacked GDB to
print a debug log whenever the SIGTERM handler was called, and,
whenever the event loop finally calls the async SIGTERM handler.
Here's what I see:
infrun: 30011 [Thread 30011],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x4005de
--> infrun: got SIGTERM <--
infrun: stepping inside range [0x4005de-0x4005e0]
infrun: resume (step=1, signal=GDB_SIGNAL_0), ...
infrun: prepare_to_wait
--> infrun: handling async SIGTERM <--
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
gdb.base/gdb-sigterm.exp: expect eof #27
FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times
So, no delay on the GDB side. It just happens that occasionally it
takes more than 200 single-steps before SIGTERM even reaches GDB.
This just looks like a kernel/scheduling issue --- some extra usage
spike in the system (e.g., an I/O spike) might cause it for me. For
the build slaves, I'm guessing they're frequently busy enough to trip
on this often. Particularly more so now that we're having them run
tests in parallel mode.
The fix is to detect failure by timeout instead of counting single
steps. This should be more reliable. Indeed for me, after this
commit, I couldn't trigger a FAIL anymore, even after letting the test
run for an hour.
By timeout is also nicer in that a board file for a slow host/target
can increase it (like, e.g., an embedded GNU/Linux board).
Tested on x86_64 Fedora 20, native, gdbserver, and extended-remote
gdbserver.
gdb/testsuite/
2015-02-06 Pedro Alves <palves@redhat.com>
* gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
determine how many seconds to pass to 'alarm'.
* gdb.base/gdb-sigterm.exp (top level): Build program with
-DTIMEOUT=$timeout.
(do_test): Return success/failure indication. Add more verbose
logging. Don't fail if 200 single steps are seen. Instead, fail
when the test times out.
(passes): New global.
(top level): Break the testing loop if testing fails on any
iteration. Use gdb_assert.
This commit modifies the test program gdb.base/info-os.c so that
it cleans up all allocated System V IPC objects when a fatal
error occurs. Without this, it was possible for the program
to leave IPC objects on the system, and such objects persist
until they are manually deleted or the system reboots.
I looked at changing the SysV IPC key for allocating the IPC objects to
IPC_PRIVATE. That would prevent errors due to namespace conflicts with the
key. However, the test needs to read the actual key number from the 'info
os' command output, and IPC_PRIVATE won't work for that.
gdb/testsuite/ChangeLog:
2015-02-04 Don Breazeal <donb@codesourcery.com>
* gdb.base/info-os.c (shmid, semid, msqid): Make variables static
and initialize them.
(ipc_cleanup): New function.
(main): Don't declare shmid, semid, and msqid. Add a call to
atexit so that we call ipc_cleanup on exit.
Every type has to pay the price in memory usage for their presence.
The proper place for them is in the type_specific field which exists
for this purpose.
gdb/ChangeLog:
* dwarf2read.c (process_structure_scope): Update setting of
TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
* gdbtypes.c (internal_type_vptr_fieldno): New function.
(set_type_vptr_fieldno): New function.
(internal_type_vptr_basetype): New function.
(set_type_vptr_basetype): New function.
(get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
TYPE_VPTR_BASETYPE.
(allocate_cplus_struct_type): Initialize vptr_fieldno.
(recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
(print_cplus_stuff): ... moved here.
(copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
* gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
moved to ...
(struct cplus_struct_type): ... here. All uses updated.
(TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
(internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
(internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
* stabsread.c (read_tilde_fields): Update setting of
TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp <maint print type argc>: Update expected output.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
GCC5 defaults to the GNU11 standard for C and warns by default for
implicit function declarations and implicit return types.
https://gcc.gnu.org/gcc-5/porting_to.html
Fixing these issues in the testsuite turns 9 untested and 17 unsupported
testcases into 417 new passes when compiling with GCC5.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-bp_permanent.c (standard): New declaration.
* gdb.base/disp-step-fork.c: Include unistd.h.
* gdb.base/siginfo-obj.c: Include stdio.h.
* gdb.base/siginfo-thread.c: Likewise.
* gdb.mi/non-stop.c: Include unistd.h.
* gdb.mi/nsthrexec.c: Include stdio.h.
* gdb.mi/pthreads.c: Include unistd.h.
* gdb.modula2/unbounded1.c (main): Declare returns int.
* gdb.reverse/consecutive-reverse.c: Likewise.
* gdb.threads/create-fail.c: Include unistd.h.
* gdb.threads/killed.c: Likewise.
* gdb.threads/linux-dp.c: Likewise.
* gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
* gdb.threads/non-ldr-exc-2.c: Likewise.
* gdb.threads/non-ldr-exc-3.c: Likewise.
* gdb.threads/non-ldr-exc-4.c: Likewise.
* gdb.threads/pthreads.c: Include unistd.h.
(main): Declare returns int.
* gdb.threads/tls-main.c (foo): New declaration.
* gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
Add a flag field is_noreturn to struct func_type. Make calling_convention
a small bit field to not increase the size of the struct. Set is_noreturn
if the new GCC5/DWARF5 DW_AT_noreturn is set on a DW_TAG_subprogram.
Use this information to warn the user before doing a finish or return from
a function that does not return normally to its caller.
(gdb) finish
warning: Function endless does not return normally.
Try to finish anyway? (y or n)
(gdb) return
warning: Function does not return normally to caller.
Make endless return now? (y or n)
gdb/ChangeLog
* dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
DW_AT_noreturn.
* gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
calling_convention an 8 bit bit field.
(TYPE_NO_RETURN): New macro.
* infcmd.c (finish_command): Query if function does not return
normally.
* stack.c (return_command): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/noreturn-return.c: New file.
* gdb.base/noreturn-return.exp: New file.
* gdb.base/noreturn-finish.c: New file.
* gdb.base/noreturn-finish.exp: New file.
include/ChangeLog
* dwarf2.def (DW_AT_noreturn): New DWARF5 attribute.
The dwarf2.h addition and the code to emit the new attribute is already in
the gcc tree.
gdb_interact is a small utility that we have found quite useful to debug
test cases.
Putting gdb_interact in a test suspends it and allows to interact with
gdb to inspect whatever you want. You can then type ">>>" to resume the
test execution. Of course, this is only for gdb devs. It wouldn't make
sense to leave a gdb_interact permanently in a test case.
When starting the interaction with the user, the script prints this
banner:
+------------------------------------------+
| Script interrupted, you can now interact |
| with by gdb. Type >>> to continue. |
+------------------------------------------+
Notes:
* When gdb is launched, the gdb_spawn_id variable (lib/gdb.exp) is
assigned -1. Given the name, I would expect it to contain the gdb
expect spawn id, which is needed for interact. I changed all places
that set gdb_spawn_id to -1 to set it to the actual gdb spawn id
instead.
* When entering the "interact" mode, the last (gdb) prompt is already
eaten by expect, so it doesn't show up on the terminal. Subsequent
prompts do appear though. We tried to print "(gdb)" just before the
interact to replace it. However, it could be misleading if you are
debugging an MI test case, it makes you think that you are typing in a
CLI prompt, when in reality it's MI. In the end I decided that since
the feature is for developers who know what they're doing and that one
is normally consciously using gdb_interact, the script doesn't need
to babysit the user.
* There are probably some quirks depending on where in the script
gdb_interact appears (e.g. it could interfere with following
commands and make them fail), but it works for most cases. Quirks can
always be fixed later.
The idea and original implementation was contributed by Anders
Granlund, a colleague of mine. Thanks to him.
gdb/testsuite/ChangeLog:
* gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
* gdb.base/valgrind-db-attach.exp: Same.
* gdb.base/valgrind-infcall.exp: Same.
* lib/mi-support.exp (default_mi_gdb_start): Same.
* lib/prompt.exp (default_prompt_gdb_start): Same.
* lib/gdb.exp (default_gdb_spawn): Same.
(gdb_interact): New.
This patch updates two attach tests to use utility procs for checking if
the attach test should run and for launching the program to be attached, as
follows:
1) Use can_spawn_for_attach instead of is_remote target
2) Use spawn_wait_for_attach instead of exec/sleep
Tested (1) with i686-mingw32 host and i686-pc-linux-gnu build/target and
both with x86_64 Ubuntu.
gdb/testsuite/ChangeLog:
* gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
instead of checking whether the target board is remote and
use spawn_wait_for_attach instead of exec/sleep.
* gdb.base/attach-twice.exp: Likewise.
Executing a gdb script that runs the inferior (from the command line
with -x), and has it hit breakpoints with breakpoint commands that
themselves run the target, is currently broken on async targets
(Linux, remote).
While we're executing a command list or a script, we force the
interpreter to be sync, which results in some functions nesting an
event loop and waiting for the target to stop, instead of returning
immediately and having the top level event loop handle the stop.
The issue with this bug is simply that bpstat_do_actions misses
checking whether the interpreter is sync. When we get here, in the
case of executing a script (or, when the interpreter is sync), the
program has already advanced to the next breakpoint, through
maybe_wait_sync_command_done. We need to process its breakpoints
immediately, just like with a sync target.
Tested on x86_64 Fedora 20.
gdb/
2015-01-14 Pedro Alves <palves@redhat.com>
PR gdb/17525
* breakpoint.c: Include "interps.h".
(bpstat_do_actions_1): Also check whether the interpreter is
async.
gdb/testsuite/
2015-01-14 Pedro Alves <palves@redhat.com>
Joel Brobecker <brobecker@adacore.com>
PR gdb/17525
* gdb.base/bp-cmds-execution-x-script.c: New file.
* gdb.base/bp-cmds-execution-x-script.exp: New file.
* gdb.base/bp-cmds-execution-x-script.gdb: New file.
Commit d3d4baed (PR python/17372 - Python hangs when displaying
help()) had the side effect of causing 'gdb -batch' to leave the
terminal in the wrong state if the program was run. E.g,.
$ echo 'main(){*(int*)0=0;}' | gcc -x c -; ./gdb/gdb -batch -ex r ./a.out
Program received signal SIGSEGV, Segmentation fault.
0x00000000004004ff in main ()
$
If you start typing the next command, seemingly nothing happens - GDB
left the terminal with echo disabled.
The issue is that that "r" ends up in fetch_inferior_event, which
calls reinstall_readline_callback_handler_cleanup, which causes
readline to prep the terminal (raw, echo disabled). But "-batch"
causes GDB to exit before the top level event loop is first started,
and then nothing de-preps the terminal.
The reinstall_readline_callback_handler_cleanup function's intro
comment mentions:
"Need to do this as we go back to the event loop, ready to process
further input."
but the implementation forgets the case of when the interpreter is
sync, which indicates we won't return to the event loop yet, or as in
the case of -batch, we have not started it yet.
The fix is to not install the readline callback in that case.
For the test, in this case, checking that command echo still works is
sufficient. Comparing stty output before/after running GDB is even
better. Because stty may not be available, the test tries both ways.
In any case, since expect's spawn (what we use to start gdb) creates a
new pseudo tty, another expect spawn or tcl exec after GDB exits would
not see the wrong terminal settings. So instead, the test spawns a
shell and runs stty and GDB in it.
Tested on x86_64 Fedora 20.
gdb/
2015-01-14 Pedro Alves <palves@redhat.com>
PR cli/17828
* infrun.c (reinstall_readline_callback_handler_cleanup): Don't
reinstall if the interpreter is sync.
gdb/testsuite/
2015-01-14 Pedro Alves <palves@redhat.com>
PR cli/17828
* gdb.base/batch-preserve-term-settings.c: New file.
* gdb.base/batch-preserve-term-settings.exp: New file.
gdb/ChangeLog:
PR gdb/15830
* NEWS: The "maint demangle" command is renamed as "demangle".
* demangle.c: #include cli/cli-utils.h, language.h.
(demangle_command): New function.
(_initialize_demangle): Add new command "demangle".
* maint.c (maintenance_demangle): Stub out.
(_initialize_maint_cmds): Update help text for "maint demangle",
and mark as deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging C Plus Plus): Mention "demangle".
(Symbols): Ditto.
(Maintenance Commands): Delete docs for "maint demangle".
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Remove references to "maint demangle".
* gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
Add tests for explicitly specifying language to demangle.
* gdb.dlang/demangle.exp: Ditto.
This patch fixes the watch_thread_num.exp test to work when the target
is better at making event handling be fair among threads.
I wrote patches that make GDB native and GDBserver event handling
fairer between threads. That is, if threads A and B both
simultaneously trigger some debug event, GDB will pick either A or B
at random, rather than always handling the event of A first. There's
code for that in the Linux backends (gdb and gdbserver) already, but
it can be improved, and only works in all-stop mode.
With those fixes in place, I found that the watch_thread_num.exp would
often time out. The problem is that the test only works _because_
event handling isn't as fair as intended. With the fairness fixes,
the test falls victim of PR10116 (gdb drops watchpoints on
multi-threaded apps) quite often.
To expand on the PR10116 reference, consider that stop events are
serialized to GDB core, through target_wait. Say a thread-specific
watchpoint as set on thread A. When the "right" thread and some other
"wrong" thread both trigger a watchpoint simultaneously, the target
may report the "wrong" thread's hit to GDB first (thread B). When
handling that event, GDB notices the watchpoint is for another thread,
and so shouldn't cause a user-visible stop. On resume, GDB saves the
now current value of the watched expression. Afterwards, the "right"
thread (thread A) reports its watchpoint trigger. But the watched
value hasn't changed since GDB last saved it, and so GDB doesn't
report the watchpoint hit to the user.
The way the test is written, the watchpoint is associated with the
first thread that happens to report an event. It happens that GDB is
processing events much more often for one of the threads, which
usually will be that same first thread.
Hacking the test with "set debug infrun 1", we see exactly that:
$ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c | sort -nr
70 infrun: 8798 [Thread 8798],
37 infrun: 8798 [Thread 8802],
36 infrun: 8798 [Thread 8804],
36 infrun: 8798 [Thread 8803],
35 infrun: 8798 [Thread 8805],
34 infrun: 8798 [Thread 8806],
The first column shows the number of times the target reported an
event for that thread, from:
infrun: target_wait (-1, status) =
infrun: 8798 [Thread 8798],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
This masks out the PR10116 issue.
However, if the target is better at giving equal priority to all
threads, the PR10116 issue happens often, so it may take quite a while
for the right thread to be the first to report its watchpoint event
just after the memory being watched really changed, resulting in test
time outs.
Here's the number of events handled for each thread on a gdbserver run
with the event fairness patches:
$ grep "infrun.*\[Thread.*," gdb.log | sort | uniq -c
2961 infrun: 13591 [Thread 13591],
2956 infrun: 13591 [Thread 13595],
2941 infrun: 13591 [Thread 13596],
2932 infrun: 13591 [Thread 13597],
2905 infrun: 13591 [Thread 13598],
2891 infrun: 13591 [Thread 13599],
Note how the number of events is much higher. The test routinely
takes over 10 seconds to finish on my machine rather than under a
second as with unpatched gdbserver, when it succeeds, but often it'll
fail with timeouts too.
So to make the test robust, this patch switches the tests to using
"awatch" instead of "watch", as access watchpoints don't care about
the watchpoint's "old value". With this, the test always finishes
quickly, and we can even bump the number of threads concurrently
writting to the shared variable, to have better assurance we're really
testing the case of the "wrong" thread triggering a watchpoint.
Here's the number of events I see for each thread on a run on my
machine, with a gdbserver patched with the event fairness series:
$ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c
5 infrun: 5298 [Thread 5302],
4 infrun: 5298 [Thread 5303],
4 infrun: 5298 [Thread 5304],
4 infrun: 5298 [Thread 5305],
4 infrun: 5298 [Thread 5306],
4 infrun: 5298 [Thread 5307],
4 infrun: 5298 [Thread 5308],
4 infrun: 5298 [Thread 5309],
4 infrun: 5298 [Thread 5310],
4 infrun: 5298 [Thread 5311],
4 infrun: 5298 [Thread 5312],
4 infrun: 5298 [Thread 5313],
4 infrun: 5298 [Thread 5314],
4 infrun: 5298 [Thread 5315],
4 infrun: 5298 [Thread 5316],
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
the global scope. Set a breakpoint after all threads are started
rather than stepping over two source lines. Expect the prompt.
* gdb.base/watch_thread_num.c (threads_started_barrier): New
global.
(NUM): Now 15.
(main): Use threads_started_barrier to wait for all threads to
start. Main thread no longer calls thread_function. Exit after
180 seconds.
(loop): New function.
(thread_function): Wait on threads_started_barrier barrier. Call
'loop' at each iteration.
* gdb.base/watch_thread_num.exp: Continue to breakpoint after all
threads have started, instead of hardcoding number of "next"
steps. Use an access watchpoint instead of a write watchpoint.
We already skip "attach" tests if the target board is remote, in
dejagnu's sense, as we use TCL's exec to spawn the program on the
build machine. We should also skip these tests if testing with
"target remote" or other stub-like targets where "attach" doesn't make
sense.
Add a helper procedure that centralizes the checks a test that needs
to spawn a program for testing "attach" and make all test files that
use spawn_wait_for_attach check it.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (can_spawn_for_attach): New procedure.
(spawn_wait_for_attach): Error out if can_spawn_for_attach returns
false.
* gdb.base/attach.exp: Use can_spawn_for_attach instead of
checking whether the target board is remote.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
tests that need to attach, instead of checking whether the target
board is remote at the top of the file.
This patch is the V2. V1 can be found in
https://sourceware.org/ml/gdb-patches/2012-05/msg00938.html
V2 is to address Joel's comment
<https://sourceware.org/ml/gdb-patches/2012-06/msg00289.html> about
keeping dumping floating point registers. Additionally, command
'info float' prints bits on nan2008 and abs2008.
------------------------------------------------------------------
The change below provides a MIPS-specific handler for the:
(gdb) info float
command. It provides information about the FPU type available (if any),
the FPU register width, and decodes the CP1 Floating Point Control and
Status Register (FCSR):
(gdb) print /x $fsr
$1 = 0xff83ffff
(gdb) info float
fpu type: double-precision
reg size: 32 bits
cond : 0 1 2 3 4 5 6 7
cause : inexact uflow oflow div0 inval unimp
mask : inexact uflow oflow div0 inval
flags : inexact uflow oflow div0 inval
rounding: -inf
flush : zero
One point to note about CP1.FCSR are the non-standard Flush-to-Nearest
and Flush-Override bits. They are not a part of the MIPS architecture and
take two positions reserved for an implementation-dependent use in the
architecture. They are present in all the FPU implementations made by
MIPS Technologies since the spin-off from SGI.
I haven't been able to track down a single other MIPS FPU implementation
that would make any use of these bits and they are required to be
hardwired to zero by the architecture specification if unimplemented.
Therefore I think it makes sense to report them in the current way.
GDB has no guaranteed access to the CP0 Processor Identification (PRId)
register to validate this feature properly and the ID information stored
in the CP1 Floating Point Implementation Register (FIR) is from my
experience not reliable enough (there's no Company ID available there for
once unlike in CP0.PRId and Processor ID is not guaranteed to be unique).
As a side note we should probably dump CP1.FIR information as well, as
there's useful stuff indicating some FPU features there. That's material
for another change however.
gdb/
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips-tdep.c (print_fpu_flags): New function.
(mips_print_float_info): Likewise.
(mips_gdbarch_init): Install mips_print_float_info as gdbarch
print_float_info routine.
gdb/testsuite/
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* gdb.base/float.exp: Handle the new output from "info float" on
MIPS targets.
This fixes a failure of the test case "complete 'info registers '" in
completion.exp on architectures where the user registers have numbers
above 99. In that case the output of "maint print user-registers" was
no longer indented, and the regexp in the test case failed to add them
to the list of expected completion results. The fix also swaps the
columns "Name" and "Nr", such that the indentation is always the same,
and to be consistent with the output of "maint print registers".
gdb/ChangeLog:
* user-regs.c (maintenance_print_user_registers): Swap "Nr" and
"Name" columns. Assure that the output is always indented.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Adjust to format changes of "maint
print user-registers".
https://sourceware.org/bugzilla/show_bug.cgi?id=17642
Regression since:
commit 012370f681
Author: Tom Tromey <tromey@redhat.com>
Date: Thu May 8 11:26:44 2014 -0600
handle VLA in a struct or union
Bugreport:
Regression with gdb scripts for Linux kernel
https://sourceware.org/ml/gdb/2014-08/msg00127.html
That big change after "else" is just reindentation.
gdb/ChangeLog
2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/17642
* gdbtypes.c (resolve_dynamic_type_internal): Apply check_typedef to
TYPE if not TYPE_CODE_TYPEDEF.
gdb/testsuite/ChangeLog
2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/17642
* gdb.base/vla-stub-define.c: New file.
* gdb.base/vla-stub.c: New file.
* gdb.base/vla-stub.exp: New file.
Provide a new completion function for the argument of "info
registers", "info all-registers", and the "lr" command in dbx mode.
Without this patch the default symbol completer is used, which is more
confusing than helpful.
Also add a test for this new feature to "completion.exp": Determine
the target's available set of registers/reggroups and compare this to
the completion of "info registers ". For determining the available
registers involve the new "maint print user-registers" command.
gdb/ChangeLog:
* completer.c: Include "target.h", "reggroups.h", and
"user-regs.h".
(reg_or_group_completer): New.
* completer.h (reg_or_group_completer): Declare.
* infcmd.c (_initialize_infcmd): Set reg_or_group_completer for
the "info registers" and "info all-registers" commands and the
dbx-mode "lr" command.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Add test for completion of "info
registers ".
1. Background information
The MIPS architecture, as originally designed and implemented in
mid-1980s has a uniform instruction word size that is 4 bytes, naturally
aligned. As such all MIPS instructions are located at addresses that
have their bits #1 and #0 set to zeroes, and any attempt to execute an
instruction from an address that has any of the two bits set to one
causes an address error exception. This may for example happen when a
jump-register instruction is executed whose register value used as the
jump target has any of these bits set.
Then in mid 1990s LSI sought a way to improve code density for their
TinyRISC family of MIPS cores and invented an alternatively encoded
instruction set in a joint effort with MIPS Technologies (then a
subsidiary of SGI). The new instruction set has been named the MIPS16
ASE (Application-Specific Extension) and uses a variable instruction
word size, which is 2 bytes (as the name of the ASE suggests) for most,
but there are a couple of exceptions that take 4 bytes, and then most of
the 2-byte instructions can be treated with a 2-byte extension prefix to
expand the range of the immediate operands used.
As a result instructions are no longer 4-byte aligned, instead they are
aligned to a multiple of 2. That left the bit #0 still unused for code
references, be it for the standard MIPS (i.e. as originally invented) or
for the MIPS16 instruction set, and based on that observation a clever
trick was invented that on one hand allowed the processor to be
seamlessly switched between the two instruction sets at any time at the
run time while on the other avoided the introduction of any special
control register to do that.
So it is the bit #0 of the instruction address that was chosen as the
selector and named the ISA bit. Any instruction executed at an even
address is interpreted as a standard MIPS instruction (the address still
has to have its bit #1 clear), any instruction executed at an odd
address is interpreted as a MIPS16 instruction.
To switch between modes ordinary jump instructions are used, such as
used for function calls and returns, specifically the bit #0 of the
source register used in jump-register instructions selects the execution
(ISA) mode for the following piece of code to be interpreted in.
Additionally new jump-immediate instructions were added that flipped the
ISA bit to select the opposite mode upon execution. They were
considered necessary to avoid the need to make register jumps in all
cases as the original jump-immediate instructions provided no way to
change the bit #0 at all.
This was all important for cases where standard MIPS and MIPS16 code had
to be mixed, either for compatibility with the existing binary code base
or to access resources not reachable from MIPS16 code (the MIPS16
instruction set only provides access to general-purpose registers, and
not for example floating-point unit registers or privileged coprocessor
0 registers) -- pieces of code in the opposite mode can be executed as
ordinary subroutine calls.
A similar approach has been more recently adopted for the MIPS16
replacement instruction set defined as the so called microMIPS ASE.
This is another instruction set encoding introduced to the MIPS
architecture. Just like the MIPS16 ASE, the microMIPS instruction set
uses a variable-length encoding, where each instruction takes a multiple
of 2 bytes. The ISA bit has been reused and for microMIPS-capable
processors selects between the standard MIPS and the microMIPS mode
instead.
2. Statement of the problem
To put it shortly, MIPS16 and microMIPS code pointers used by GDB are
different to these observed at the run time. This results in the same
expressions being evaluated producing different results in GDB and in
the program being debugged. Obviously it's the results obtained at the
run time that are correct (they define how the program behaves) and
therefore by definition the results obtained in GDB are incorrect.
A bit longer description will record that obviously at the run time the
ISA bit has to be set correctly (refer to background information above
if unsure why so) or the program will not run as expected. This is
recorded in all the executable file structures used at the run time: the
dynamic symbol table (but not always the static one!), the GOT, and
obviously in all the addresses embedded in code or data of the program
itself, calculated by applying the appropriate relocations at the static
link time.
While a program is being processed by GDB, the ISA bit is stripped off
from any code addresses, presumably to make them the same as the
respective raw memory byte address used by the processor to access the
instruction in the instruction fetch access cycle. This stripping is
actually performed outside GDB proper, in BFD, specifically
_bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at
the very bottom of that function, starting with an: "If this is an
odd-valued function symbol, assume it's a MIPS16 or microMIPS one."
comment).
This function is also responsible for symbol table dumps made by
`objdump' too, so you'll never see the ISA bit reported there by that
tool, you need to use `readelf'.
This is however unlike what is ever done at the run time, the ISA bit
once present is never stripped off, for example a cast like this:
(short *) main
will not strip the ISA bit off and if the resulting pointer is intended
to be used to access instructions as data, for example for software
instruction decoding (like for fault recovery or emulation in a signal
handler) or for self-modifying code then the bit still has to be
stripped off by an explicit AND operation.
This is probably best illustrated with a simple real program example.
Let's consider the following simple program:
$ cat foobar.c
int __attribute__ ((mips16)) foo (void)
{
return 1;
}
int __attribute__ ((mips16)) bar (void)
{
return 2;
}
int __attribute__ ((nomips16)) foo32 (void)
{
return 3;
}
int (*foo32p) (void) = foo32;
int (*foop) (void) = foo;
int fooi = (int) foo;
int
main (void)
{
return foop ();
}
$
This is plain C with no odd tricks, except from the instruction mode
attributes. They are not necessary to trigger this problem, I just put
them here so that the program can be contained in a single source file
and to make it obvious which function is MIPS16 code and which is not.
Let's try it with Linux, so that everyone can repeat this experiment:
$ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c
$
Let's have a look at some interesting symbols:
$ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 7 entries:
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar
68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p
70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop
78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32
80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo
88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi
$
Hmm, no sight of the ISA bit, but notice how foo and bar (but not
foo32!) have been marked as MIPS16 functions (ELF symbol structure's
`st_other' field is used for that).
So let's try to run and poke at this program with GDB. I'll be using a
native system for simplicity (I'll be using ellipses here and there to
remove unrelated clutter):
$ ./foobar
$ echo $?
1
$
So far, so good.
$ gdb ./foobar
[...]
(gdb) break main
Breakpoint 1 at 0x400490: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Yay, it worked! OK, so let's poke at it:
(gdb) print main
$1 = {int (void)} 0x400490 <main>
(gdb) print foo32
$2 = {int (void)} 0x400684 <foo32>
(gdb) print foo32p
$3 = (int (*)(void)) 0x400684 <foo32>
(gdb) print bar
$4 = {int (void)} 0x40068c <bar>
(gdb) print foo
$5 = {int (void)} 0x400680 <foo>
(gdb) print foop
$6 = (int (*)(void)) 0x400681 <foo>
(gdb)
A-ha! Here's the difference and finally the ISA bit!
(gdb) print /x fooi
$7 = 0x400681
(gdb) p/x $pc
p/x $pc
$8 = 0x400491
(gdb)
And here as well...
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
main () at foobar.c:24
24 }
Value returned is $9 = 1
(gdb) continue
Continuing.
[Inferior 1 (process 14103) exited with code 01]
(gdb)
So let's be a bit inquisitive...
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Actually we do not like to run foo here at all. Let's run bar instead!
(gdb) set foop = bar
(gdb) print foop
$10 = (int (*)(void)) 0x40068c <bar>
(gdb)
Hmm, no ISA bit. Is it going to work?
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) p/x $pc
$11 = 0x40068c
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068c <+0>: jr ra
0x0040068e <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
Program received signal SIGILL, Illegal instruction.
bar () at foobar.c:9
9 }
(gdb)
Oops!
(gdb) p/x $pc
$12 = 0x40068c
(gdb)
We're still there!
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
So let's try something else:
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
=> 0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
Program received signal SIGILL, Illegal instruction.
foo () at foobar.c:4
4 }
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
The same problem!
(gdb) run
Starting program:
/net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo32
(gdb) advance foo32
foo32 () at foobar.c:14
14 }
(gdb) disassemble
Dump of assembler code for function foo32:
=> 0x00400684 <+0>: jr ra
0x00400688 <+4>: li v0,3
End of assembler dump.
(gdb) finish
Run till exit from #0 foo32 () at foobar.c:14
main () at foobar.c:24
24 }
Value returned is $14 = 3
(gdb) continue
Continuing.
[Inferior 1 (process 14113) exited with code 03]
(gdb)
That did work though, so it's the ISA bit only!
(gdb) quit
Enough!
That's the tip of the iceberg only though. So let's rebuild the
executable with some dynamic symbols:
$ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c
$ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 32 entries:
6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
$
OK, now the ISA bit is there for a change, but the MIPS16 `st_other'
attribute gone, hmm... What does `objdump' do then:
$ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar'
foobar-dyn: file format elf32-tradbigmips
SYMBOL TABLE:
00000000 l df *ABS* 00000000 foobar.c
004009cc g F .text 00000004 0xf0 bar
00410b88 g O .data 00000004 foo32p
00410b84 g O .data 00000004 foop
004009c4 g F .text 00000008 foo32
004009c0 g F .text 00000004 0xf0 foo
00410b80 g O .data 00000004 fooi
DYNAMIC SYMBOL TABLE:
004009cc g DF .text 00000004 Base 0xf0 bar
00410b88 g DO .data 00000004 Base foo32p
00410b84 g DO .data 00000004 Base foop
004009c4 g DF .text 00000008 Base foo32
004009c0 g DF .text 00000004 Base 0xf0 foo
00410b80 g DO .data 00000004 Base fooi
$
Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone
again.
Let's have a look at some DWARF-2 records GDB uses (I'll be stripping
off a lot here for brevity) -- debug info:
$ mips-linux-gnu-readelf -wi foobar
Contents of the .debug_info section:
[...]
Compilation Unit @ offset 0x88:
Length: 0xbb (32-bit)
Version: 4
Abbrev Offset: 62
Pointer Size: 4
<0><93>: Abbrev Number: 1 (DW_TAG_compile_unit)
<94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2
<98> DW_AT_language : 1 (ANSI C)
<99> DW_AT_name : (indirect string, offset: 0x190): foobar.c
<9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...]
<a1> DW_AT_ranges : 0x0
<a5> DW_AT_low_pc : 0x0
<a9> DW_AT_stmt_list : 0x27
<1><ad>: Abbrev Number: 2 (DW_TAG_subprogram)
<ae> DW_AT_external : 1
<ae> DW_AT_name : foo
<b2> DW_AT_decl_file : 1
<b3> DW_AT_decl_line : 1
<b4> DW_AT_prototyped : 1
<b4> DW_AT_type : <0xc2>
<b8> DW_AT_low_pc : 0x400680
<bc> DW_AT_high_pc : 0x400684
<c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<c2> DW_AT_GNU_all_call_sites: 1
<1><c2>: Abbrev Number: 3 (DW_TAG_base_type)
<c3> DW_AT_byte_size : 4
<c4> DW_AT_encoding : 5 (signed)
<c5> DW_AT_name : int
<1><c9>: Abbrev Number: 4 (DW_TAG_subprogram)
<ca> DW_AT_external : 1
<ca> DW_AT_name : (indirect string, offset: 0x18a): foo32
<ce> DW_AT_decl_file : 1
<cf> DW_AT_decl_line : 11
<d0> DW_AT_prototyped : 1
<d0> DW_AT_type : <0xc2>
<d4> DW_AT_low_pc : 0x400684
<d8> DW_AT_high_pc : 0x40068c
<dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<de> DW_AT_GNU_all_call_sites: 1
<1><de>: Abbrev Number: 2 (DW_TAG_subprogram)
<df> DW_AT_external : 1
<df> DW_AT_name : bar
<e3> DW_AT_decl_file : 1
<e4> DW_AT_decl_line : 6
<e5> DW_AT_prototyped : 1
<e5> DW_AT_type : <0xc2>
<e9> DW_AT_low_pc : 0x40068c
<ed> DW_AT_high_pc : 0x400690
<f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<f3> DW_AT_GNU_all_call_sites: 1
<1><f3>: Abbrev Number: 5 (DW_TAG_subprogram)
<f4> DW_AT_external : 1
<f4> DW_AT_name : (indirect string, offset: 0x199): main
<f8> DW_AT_decl_file : 1
<f9> DW_AT_decl_line : 21
<fa> DW_AT_prototyped : 1
<fa> DW_AT_type : <0xc2>
<fe> DW_AT_low_pc : 0x400490
<102> DW_AT_high_pc : 0x4004a4
<106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<108> DW_AT_GNU_all_tail_call_sites: 1
[...]
$
-- no sign of the ISA bit anywhere -- frame info:
$ mips-linux-gnu-readelf -wf foobar
[...]
Contents of the .debug_frame section:
00000000 0000000c ffffffff CIE
Version: 1
Augmentation: ""
Code alignment factor: 1
Data alignment factor: -4
Return address column: 31
DW_CFA_def_cfa_register: r29
DW_CFA_nop
00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684
00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c
00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690
00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4
DW_CFA_advance_loc: 6 to 00400496
DW_CFA_def_cfa_offset: 32
DW_CFA_offset: r31 at cfa-4
DW_CFA_advance_loc: 6 to 0040049c
DW_CFA_restore: r31
DW_CFA_def_cfa_offset: 0
DW_CFA_nop
DW_CFA_nop
DW_CFA_nop
[...]
$
-- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange):
$ mips-linux-gnu-readelf -wR foobar
Contents of the .debug_ranges section:
Offset Begin End
00000000 00400680 00400690
00000000 00400490 004004a4
00000000 <End of list>
$
-- no sign of the ISA bit anywhere -- line info:
$ mips-linux-gnu-readelf -wl foobar
Raw dump of debug contents of section .debug_line:
[...]
Offset: 0x27
Length: 78
DWARF Version: 2
Prologue Length: 31
Minimum Instruction Length: 1
Initial value of 'is_stmt': 1
Line Base: -5
Line Range: 14
Opcode Base: 13
Opcodes:
Opcode 1 has 0 args
Opcode 2 has 1 args
Opcode 3 has 1 args
Opcode 4 has 1 args
Opcode 5 has 1 args
Opcode 6 has 0 args
Opcode 7 has 0 args
Opcode 8 has 0 args
Opcode 9 has 1 args
Opcode 10 has 0 args
Opcode 11 has 0 args
Opcode 12 has 1 args
The Directory Table is empty.
The File Name Table:
Entry Dir Time Size Name
1 0 0 0 foobar.c
Line Number Statements:
Extended opcode 2: set Address to 0x400681
Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2
Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4
Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12
Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14
Advance Line by -7 to 7
Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7
Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9
Advance PC by 3 to 0x400690
Extended opcode 1: End of Sequence
Extended opcode 2: set Address to 0x400491
Advance Line by 21 to 22
Copy
Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23
Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22
Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23
Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24
Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23
Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24
Advance PC by 7 to 0x4004a4
Extended opcode 1: End of Sequence
[...]
-- a-ha, the ISA bit is there! However it's not always right for some
reason, I don't have a small test case to show it, but here's an excerpt
from MIPS16 libc, a prologue of a function:
00019630 <__libc_init_first>:
19630: e8a0 jrc ra
19632: 6500 nop
00019634 <_init>:
19634: f000 6a11 li v0,17
19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54>
1963c: f400 3240 sll v0,16
19640: e269 addu v0,v1
19642: 659a move gp,v0
19644: 64f6 save 48,ra,s0-s1
19646: 671c move s0,gp
19648: d204 sw v0,16(sp)
1964a: f352 984c lw v0,-27828(s0)
1964e: 6724 move s1,a0
and the corresponding DWARF-2 line info:
Line Number Statements:
Extended opcode 2: set Address to 0x19631
Advance Line by 44 to 45
Copy
Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48
Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53
Advance PC by constant 17 to 0x19646
Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53
Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53
-- see that "Advance PC by constant 17" there? It clears the ISA bit,
however code at 0x19646 is not standard MIPS code at all. For some
reason the constant is always 17, I've never seen DW_LNS_const_add_pc
used with any other value -- is that a binutils bug or what?
3. Solution:
I think we should retain the value of the ISA bit in code references,
that is effectively treat them as cookies as they indeed are (although
trivially calculated) rather than raw memory byte addresses.
In a perfect world both the static symbol table and the respective
DWARF-2 records should be fixed to include the ISA bit in all the cases.
I think however that this is infeasible.
All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be
tracked down. This function is used by `elf_slurp_symbol_table' that in
turn is used by `bfd_canonicalize_symtab' and
`bfd_canonicalize_dynamic_symtab', which are public interfaces.
Similarly DWARF-2 records are used outside GDB, one notable if a bit
questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have
identified at least bits in `execute_cfa_program' and
`uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame',
that would need an update as they effectively flip the ISA bit freely;
see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h.
But there may be more places. Any change in how DWARF-2 records are
produced would require an update there and would cause compatibility
problems with libgcc.a binaries already distributed; given that this is
a static library a complex change involving function renames would
likely be required.
I propose therefore to accept the existing inconsistencies and deal with
them entirely within GDB. I have figured out that the ISA bit lost in
various places can still be recovered as long as we have symbol
information -- that'll have the `st_other' attribute correctly set to
one of standard MIPS/MIPS16/microMIPS encoding.
Here's the resulting change. It adds a couple of new `gdbarch' hooks,
one to update symbol information with the ISA bit lost in
`_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2
records as they're processed. The ISA bit is set in each address
handled according to information retrieved from the symbol table for the
symbol spanning the address if any; limits are adjusted based on the
address they point to related to the respective base address.
Additionally minimal symbol information has to be adjusted accordingly
in its gdbarch hook.
With these changes in place some complications with ISA bit juggling in
the PC that never fully worked can be removed from the MIPS backend.
Conversely, the generic dynamic linker event special breakpoint symbol
handler has to be updated to call the minimal symbol gdbarch hook to
record that the symbol is a MIPS16 or microMIPS address if applicable or
the breakpoint will be set at the wrong address and either fail to work
or cause SIGTRAPs (this is because the symbol is handled early on and
bypasses regular symbol processing).
4. Results obtained
The change fixes the example above -- to repeat only the crucial steps:
(gdb) break main
Breakpoint 1 at 0x400491: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) print foo
$1 = {int (void)} 0x400681 <foo>
(gdb) set foop = bar
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068d <+0>: jr ra
0x0040068f <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
main () at foobar.c:24
24 }
Value returned is $2 = 2
(gdb) continue
Continuing.
[Inferior 1 (process 14128) exited with code 02]
(gdb)
-- excellent!
The change removes about 90 failures per MIPS16 multilib in mips-sde-elf
testing too, results for MIPS16 are now similar to that for standard
MIPS; microMIPS results are a bit worse because of host-I/O problems in
QEMU used instead of MIPSsim for microMIPS testing only:
=== gdb Summary ===
# of expected passes 14299
# of unexpected failures 187
# of expected failures 56
# of known failures 58
# of unresolved testcases 11
# of untested testcases 52
# of unsupported tests 174
MIPS16:
=== gdb Summary ===
# of expected passes 14298
# of unexpected failures 187
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 12
# of untested testcases 52
# of unsupported tests 174
microMIPS:
=== gdb Summary ===
# of expected passes 14149
# of unexpected failures 201
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 7
# of untested testcases 53
# of unsupported tests 175
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
Maciej W. Rozycki <macro@mips.com>
Pedro Alves <pedro@codesourcery.com>
gdb/
* gdbarch.sh (elf_make_msymbol_special): Change type to `F',
remove `predefault' and `invalid_p' initializers.
(make_symbol_special): New architecture method.
(adjust_dwarf2_addr, adjust_dwarf2_line): Likewise.
(objfile, symbol): New declarations.
* arch-utils.h (default_elf_make_msymbol_special): Remove
prototype.
(default_make_symbol_special): New prototype.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* mips-tdep.h (mips_unmake_compact_addr): New prototype.
* arch-utils.c (default_elf_make_msymbol_special): Remove
function.
(default_make_symbol_special): New function.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* dwarf2-frame.c (decode_frame_entry_1): Call
`gdbarch_adjust_dwarf2_addr'.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise. Call `gdbarch_make_symbol_special'.
(read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'.
(read_call_site_scope): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf2_record_block_ranges): Likewise.
(read_attribute_value): Likewise.
(dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'.
(new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'.
* elfread.c (elf_symtab_read): Don't call
`gdbarch_elf_make_msymbol_special' if unset.
* mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip
the ISA bit from the PC.
* mips-tdep.c (mips_unmake_compact_addr): New function.
(mips_elf_make_msymbol_special): Set the ISA bit in the symbol's
address appropriately.
(mips_make_symbol_special): New function.
(mips_pc_is_mips): Set the ISA bit before symbol lookup.
(mips_pc_is_mips16): Likewise.
(mips_pc_is_micromips): Likewise.
(mips_pc_isa): Likewise.
(mips_adjust_dwarf2_addr): New function.
(mips_adjust_dwarf2_line): Likewise.
(mips_read_pc, mips_unwind_pc): Keep the ISA bit.
(mips_addr_bits_remove): Likewise.
(mips_skip_trampoline_code): Likewise.
(mips_write_pc): Don't set the ISA bit.
(mips_eabi_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.
(mips_gdbarch_init): Install `mips_make_symbol_special',
`mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch
handlers.
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Get
target-specific symbol address adjustments.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
gdb/testsuite/
* gdb.base/func-ptrs.c: New file.
* gdb.base/func-ptrs.exp: New file.
On Linux native, if dprintfs are inserted when detaching, they are left
in the inferior which causes it to crash from a SIGTRAP. It also happens
with dprintfs on remote targets, when set disconnected-dprintf is off.
The rationale of the line modified by the patch was to leave dprintfs
inserted in order to support disconnected dprintfs. However, not all
dprintfs are persistent. Also, there's no reason other kinds of
breakpoints can't be persistent either. So this replaces the bp_dprintf
check with a check on whether the location is persistent.
bl->target_info.persist will be 1 only if disconnected-dprintf is on and
we are debugging a remote target. On native, it will always be 0,
regardless of the value of disconnected-dprintf. This makes sense, since
disconnected dprintfs are not supported by the native target.
One issue about the test is that it does not pass when using
--target_board=native-extended-gdbserver, partly due to bug 17302 [1].
One quick hack I tried for this was to add a useless "next" between the
call to getpid() and detach, which avoids the bug. There is still one
case where the test fails, and that is with:
- breakpoint always-inserted on
- dprintf-style agent
- disconnected-dprintf on
What happens is that my detach does not actually detach the process,
because some persistent commands (the disconnected dprintf) is present.
However since gdbserver is ran with --once, when gdb disconnects,
gdbserver goes down and takes with it all the processes it spawned and
that are still under its control (which includes my test process).
When the test checks if the test process is still alive, it obvisouly
fails. Investigating about that led me to ask a question on the ML [2]
about the behavior of detach.
Until the remote case is sorted out, the problematic test is marked as
KFAIL.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=17302
[2] https://sourceware.org/ml/gdb/2014-08/msg00115.html
gdb/Changelog:
PR breakpoints/17012
* breakpoint.c (remove_breakpoints_pid): Skip removing
breakpoint if it is marked as persistent.
gdb/testsuite/ChangeLog:
PR breakpoints/17012
* gdb.base/dprintf-detach.c: New file.
* gdb.base/dprintf-detach.exp: New file.
The test case builds two copies of the program, one with the compile
option "ldflags=-Wl,-Ttext=0x1000000" and the other with the address
changed to 0x2000000. However, when linking with ld.bfd, the
resulting executables crash early in ld.so on S390 and i386.
Analysis of the crash: The default linker script establishes a certain
order of loadable sections, and the option "-Ttext" effectively splits
these into an "unaffected" lot (everything before .text) and an
"affected" lot. The affected lot is placed at the given address,
whereas the unaffected lot stays at its default address. The
unaffected lot starts at an aligned address plus Elf header sizes,
which is good if it is the first LOAD segment (like on AMD64). But if
the affected lot comes first instead (like on S390 and i386), the PHDR
doesn't fit there and is placed *outside* any LOAD segments. Then the
PHDR is not mapped when the loader gets control, and the loader runs
into a segmentation fault while trying to access it.
Since we are lucky about the order of segments on AMD64, the test
succeeds there, but the resulting binaries are unusually large -- 2.1M
each, with lots of padding within.
When replacing '-Ttext' by '-Ttext-segment', the linker moves all
segments consistently, the binaries have normal sizes, and the test
case succeeds on all mentioned platforms.
Since old versions of the gold linker don't support '-Ttext-segment',
the patch also adds logic for falling back to '-Ttext'.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp: Specify the link address
with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
if the linker doesn't understand this.
We enable systemtap probe in glibc recently, and see the following gdb fail,
(gdb) set solib-absolute-prefix /.
...
Stopped due to shared library event:^M
Inferior loaded /./foo/bar/gdb.base/break-probes-solib.so
...
(gdb) FAIL: gdb.base/break-probes.exp: run til our library loads (the program exited)
$binfile_lib is /foo/bar/gdb.base/break-probes-solib.so, but the
sysroot is prefixed in solib.c:solib_find, as comments described:
Global variable GDB_SYSROOT is used as a prefix directory
to search for shared libraries if they have an absolute path.
so the output becomes "/./foo/bar/gdb.base/break-probes-solib.so", which
is still correct. However, the test repeatedly continue the program
and tries to match $binfile_lib, finally, the program exits and the
test fails.
This patch is to adjust the pattern to match $sysroot$binfile_lib
instead of $binfile_lib.
gdb/testsuite:
2014-11-28 Yao Qi <yao@codesourcery.com>
* gdb.base/break-probes.exp: Match library name prefixed with
sysroot.
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
The bp-permanent test case assumes that a NOP is exactly as long as a
software breakpoint. This is not the case for the S390 "nop"
instruction, which is 4 bytes long, while a software breakpoint is
just 2 bytes long. The "nopr" instruction has the right size and can
be used instead.
Without this patch the test case fails on S390 when trying to continue
after SIGTRAP on the permanent breakpoint:
...
Continuing.
Program received signal SIGILL, Illegal instruction.
test () at /home/arnez/src/binutils-gdb/gdb/testsuite/gdb.base/bp-permanent.c:40
40 NOP; /* after permanent bp */
(gdb)
FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0:
basics: stop at permanent breakpoint
With this patch the test case succeeds without any FAILs.
gdb/testsuite/ChangeLog:
* gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
4-byte instruction on S390.
Fix some more C compiler warnings for missing function return types
and implicit function declarations in the GDB testsuite.
gdb/testsuite/ChangeLog:
* gdb.base/bp-permanent.c: Include unistd.h.
* gdb.python/py-framefilter-mi.c (main): Add return type.
* gdb.python/py-framefilter.c (main): Likewise.
* gdb.trace/actions-changed.c (main): Likewise.
In some .exp files it was missed to remove the references to
eye-catchers like "set breakpoint 9 here" when the non-prototype
function header variants they belonged to were deleted. This patch
cleans this up.
gdb/testsuite/ChangeLog:
* gdb.base/condbreak.exp: Drop references to removed non-prototype
function header variants in break1.c.
* gdb.base/ena-dis-br.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.reverse/until-precsave.exp: Drop references to removed
non-prototype function header variants in ur1.c.
* gdb.reverse/until-reverse.exp: Likewise.
Basically the problem is that "symtab" is ambiguous.
Is it the primary symtab (where we canonically think of
blockvectors as being stored) or is it for a specific file
(where each file's line table is stored) ?
gdb_disassembly wants the symtab that contains the line table
but is instead getting the primary symtab.
gdb/ChangeLog:
PR symtab/17559
* symtab.c (find_pc_line_symtab): New function.
* symtab.h (find_pc_line_symtab): Declare.
* disasm.c (gdb_disassembly): Call find_pc_line_symtab instead of
find_pc_symtab.
* tui/tui-disasm.c (tui_set_disassem_content): Ditto.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Ditto.
* tui/tui-source.c (tui_vertical_source_scroll): Ditto.
* tui/tui-win.c (make_visible_with_new_height): Ditto.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Ditto.
(tui_display_main): Call find_pc_line_symtab instead of find_pc_line.
gdb/testsuite/ChangeLog:
PR symtab/17559
* gdb.base/line-symtabs.exp: New file.
* gdb.base/line-symtabs.c: New file.
* gdb.base/line-symtabs.h: New file.
Remove old-style function header variants from sepdebug.c. Eliminate
references to the removed locations "breakpoint 9" and "breakpoint 13"
from sepdebug.exp.
gdb/testsuite/ChangeLog:
* gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
* gdb.base/sepdebug.exp: Drop references to removed code.
Remove old-style function header variants from list0.h and list1.c.
Fill the removed lines with comments or empty lines, such that the
line numbering is undisturbed. Changes to the line numbering would
require heavy adjustments to list.exp, where many line numbers are
hard-coded, as well as a fair amount of knowledge about the source
code in and around certain lines. Thus the dependency on the line
numbering can not be eliminated so easily, and it may not even be a
useful goal for a "list" test case. Another option might be to adjust
the literal line numbers in list.exp, but even that is not as
straightforward as it may seem, since the test case expects certain
source lines to be exactly n lines apart.
gdb/testsuite/ChangeLog:
* gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped
variant. Preserve original line numbering.
* gdb.base/list1.c: Likewise.
Remove old-style function headers from break.c and break1.c. Adjust
break.exp accordingly; in particular eliminate references to the
removed locations "breakpoint 9, 13, and 16" from break.exp.
gdb/testsuite/ChangeLog:
* gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
* gdb.base/break1.c: Likewise.
* gdb.base/break.exp: Drop references to removed code.
The previous patch did not indent perform_all_tests() correctly after
moving the main logic into it, to avoid obscuring the functional
changes. This patch fixes the indentation.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.exp (perform_all_tests): Re-indent.
In callfuncs.exp, compile callfuncs.c with and without C function
header prototypes and execute all tests after each compilation.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.exp: Remove 'prototypes' variable. Move main
logic into perform_all_tests() and invoke it with and without
function header prototypes.
(do_function_calls): Remove conditional XFAIL for PR 5318.
(rerun_and_prepare): Remove duplicate code.
(perform_all_tests): New. Main logic moved here.
The C source file for the 'callfuncs' test case did not compile with
-DNO_PROTOTYPES or -DPROTOTYPES. This patch fixes various syntax
errors under #ifdef NO_PROTOTYPES and a small typo under #ifdef
PROTOTYPES.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in
code guarded by #ifdef NO_PROTOTYPES.
(t_double_many_args): Likewise.
(DEF_FUNC_MANY_ARGS_1): Likewise.
(DEF_FUNC_VALUES_1): Likewise.
(t_structs_ldc): Renamed from t_structs_fc in conditional code
guarded by #ifdef PROTOTYPES.
Mark Kettenis
Andreas Arnez
Pedro Alves
Yao Qi
Antoine Tremblay
Jose E. Marchesi
Simon Marchi
Don Breazeal
Doug Evans
Gary Benson
Mark Wielaard
Anders Granlund
Joel Brobecker
Yao Qi
Andreas Arnez
Jan Kratochvil
Maciej W. Rozycki
Sergio Durigan Junior