%o0-%o5 as 64-bit values; compensate for stack bias.
(USE_STRUCT_CONVENTION): We only pass pointers to structs
if they're larger than 32 bytes.
(REG_STRUCT_HAS_ADDR): Ditto.
* sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
instead of read_register. If the target is a sparc64 and the frame
pointer is odd, compensate for the stack bias.
(get_saved_register): Use read_sp().
(DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
(sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
(sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
dummy frame.
(sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
the FP is odd, compensate for stack bias.
(sparc_store_return_value): Right-justify the return value before
writing it to %o0.
(sparc_fix_call_dummy): Don't NOP out part of the call dummy on
sparc64.
(sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
sparc64_write_fp, sp64_push_arguments,
sparc64_extract_return_value): New functions to support the
sparc64 ABI.
* dwarfread.c (handle_producer): Set processing_gcc_compilation to
the right version number.
* dwarf2read.c (read_file_scope): Assume we're processing
GCC2 output.
make it work on the simulator.
(FIX_CALL_DUMMY): Convert to function call instead of inline code.
(sparc_fix_call_dummy): Declare.
* sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
old FIX_CALL_DUMMY macro, with additional fixes for simulator.
(sparc_push_dummy_frame): Set registers differently on simulator
to prevent corrupted register window save areas.
(sparc_extract_return_value): New function, required to handle
machines without floating point.
(sparc_store_return_value): Ditto.
* config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
sparc_extract_return_value instead of using inline code.
(sparc_extract_return_value): Declare.
(STORE_RETURN_VALUE): Call sparc_store_return_value instead
of using inline code.
(sparc_store_return_value): Declare.
work correctly on little-endian hosts.
(sparc_push_arguments): New function.
(gdb_print_insn_sparc): New function.
(_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
disassembler, so that SPARClite-specific instructions will
be recognized.
* sparcl-tdep.c (readchar): Print debugging information.
(debug_serial_write): New function, a replacement for SERIAL_WRITE
that prints debugging information.
* config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
(sparc_push_arguments): Declare.
Update support for x86 Solaris 2.
* config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
files for x86 Solaris 2.
* config/i386/i386sol2.mt, i386sol2.mh: Use them.
* config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
carry flag from a given regset.
(IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
is a SunPro transformed name.
* i386-tdep.c (sunpro_static_transform_name): New function to
extract the source name from a SunPro transformed name.
* inferior.h (procfs_first_available, procfs_get_pid_fd):
Add prototypes.
* infrun.c (wait_for_inferior): Handle breakpoint hit in
signal handler without intervening stop in sigtramp.
* procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
instead of direct access to the status register.
(procfs_get_pid_fd): New function, returns procfs fd for a given pid.
* sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
lwpid.
(sol_find_new_threads): Handle failed libthread_db initialization
gracefully.
* stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
to check for a SunPro transformed symbol name.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
* sparclet-stub.c: a few clean-ups, removing dead code
* config/sparc/tm-sparclet.h: make registers ASR15, ASR19 invisible
(they're not useful, you can't change, write or even read them)
* sparclet-rom.c: Remove includes of Unix system files.
Add function "sparclet_supply_register" so that parse_register_dump
will not seg-fault by calling a null function pointer.
Remove XMODEM support (unfinished work?).
Remove flag "MO_HANDLE_NL", so monitor's output can be read by humans.
Add fill command.
Remove colon from getreg.resp_delim so PSR register will work.
Remove pointer to sparclet_load (downloading SREC's doesn't work).
Null out local register names for %g0, all %cc and all %asr regs,
since the monitor can't report them. Will return zero instead.
* sparclet-stub.c: New -- remote protocol support for sparclet CPU.
* config/sparc/tm-sparclet.h: Re-arrange REGISTER_NAMES:
Add back %g0 and %psr, add %cc coprocessor regs, add %asr regs.
Adjust NUM_REGS and REGISTER_BYTES accordingly
Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
for details about these changes. I was going to include the complete
entry in the checkin message but it was apparently so large it caused
cvs to dump core.
tm_print_insn_info.
* gdbtk.c (gdb_disassemble): Setup di.mach from
tm_print_insn_info.mach, and set endian from TARGET_BYTE_ORDER.
* i386-tdep.c (set_assembly_language_command): set
tm_print_insn_info.mach to the appropriate value for 386 or 8086
disassembly.
* printcmd.c (print_insn): Move init of disassembler_info to
_initialize_printcmd. Set endian for disassembler here.
* sparc-tdep.c: Set tm_print_insn_info.mach as appropriate to
select sparc/sparclite.
* config/sparc/{tm-sparc.h tm-sparclite.h}: Get rid of
TM_PRINT_INSN. Set TM_PRINT_INSN_MACH to
bfd_mach_sparc/bfd_mach_sparc_sparclite.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
config/sparc/tm-sparclite.h: Initialize tm_print_insn from
TM_PRINT_INSN, which comes from the tm file.
* Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure.
* configure configure.in: Only make sol-thread.o for native.
Also, switch to dlopened libthread_db.so.1.
* sol-thread.c: Switch to using dlopen to get the thread_db
library.
* configure, configure.in: Change test for libthread_db to only
work for configs where build/host/target are the same.
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
* (procfs_pid_to_str): New routine to print out thread id's in an
intelligible manner.
* sol-thread.c (sol_thread_fetch_registers): Re-order manner in
which supply_register is called to fix bug with writing writing
individual regs.
* config/sparc/tm-sun4sol2.h: Define default for
target_pid_to_str in case host lacks libthread_db.
config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
config/sparc/tm-sun4sol2.h: Use autoconf to config Solaris thread
and pthread support, since pre-2.5 systems don't come with
libthread_db.so.1.
* procfs.c (info_proc): Use int instead of id_t. Old versions of
Irix don't see to define this.
returns a possibly modified pid.
* inftarg.c (ptrace_him): Now returns pid;
* m3-nat.c (m3_trace_him): Now returns pid;
* infcmd.c (run_command): Minor cleanup.
* infrun.c (wait_for_inferior): Add another check for one_stepped
near where we read the pc to avoid erroneously setting
random_signal for multi-threaded support.
* procfs.c: Add support for Solaris LWPs. Remove def of
LOSING_POLL. Many cleanups... Several workarounds for Solaris
lossage. System call entry and exit are now handled by
dynamically registered handlers.
* (syscallname): Don't barf when handed an unknown syscall
number.
* (info_proc_syscalls): Ditto.
* sol-thread.c: New file. Implements Solaris thread support.
* symfile.c (symbol_file_add): Add call to target_new_objfile to
notify target-dependent code about new symbol tables.
* (clear_symtab_users): Call target_new_objfile to notify it of
the removal of all symbol tables.
* target.c (push_target): Make sure that to_close is non-zero
before calling it.
* target.h (target_new_objfile): Provide default.
* config/alpha/nm-osf2.h: Define LOSING_POLL because this version
of OSF can't hack using poll with /proc.
* config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be
sol-thread-new-objfile.
* config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and
add libthread_db.so.1 to NAT_CLIBS.
* config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and
target_pid_to_str.
* config/sparc/nm-nbsd.h (CHILD_PREPARE_TO_STORE): Move to here
from config/sparc/xm-nbsd.h.
* config/sparc/nm-sun4os4 (CHILD_PREPARE_TO_STORE): Ditto, from
config/sparc/xm-sparc.h.
* config/sparc/nm-sun4sol2.h: New file, renamed from nm-sysv4.h.
(PRSVADDR_BROKEN): Move here from xm-sun4sol2.h.
* config/sparc/sun4sol2.mh (NAT_FILE): Update.
* config/sparc/xm-sun4os4.h (HAVE_TERMIOS): Remove.
housekeeping
that use ptrace(). This is not as useful as doing a full dump in a
human readable format, but is better than nothing when you are trying
to verify what is actually in the user struct.
* infptrace.c (udot_info): New function.
(PT_*): Define each individually if that one is not defined.
Update copyright to 1996.
* rs6000-nat.c (kernel_u_size): New function
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* alpha-nat.c (kernel_u_size): New function.
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* sparc-nat.c (kernel_u_size): New function.
Include <sys/user.h> for "struct user"
Update copyright to 1996.
* i386b-nat.c (kernel_u_size): New function.
Update copyright to 1996.
* i386v-nat.c (kernel_u_size): New function.
Update copyright to 1996.
* config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/i386/nm-linux.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
* config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define.
(kernel_u_size): Declare.
Update copyright to 1996.
have size 4.
(REGISTER_VIRTUAL_SIZE): Likewise.
(REGISTER_VIRTUAL_TYPE): Lower 32 fp regs have type float.
Upper 32 fp regs have type double.
* sparc-tdep.c (NUM_SPARC_FPREGS): Replace with
(FP_REGISTER_BYTES): this, and update all uses.
(FP_MAX_REGNUM): Define if not already.
(get_saved_register): Handle new sparc64 fp regs.
(sparc_frame_find_saved_regs): Likewise.
(sparc_print_register_hook): Only print fp regs < 32 as doubles.
Add code to handle long doubles when gdb does.
(_initialize_sparc_tdep): Use print_insn_sparc64 if sparc64.
target.h.
* target.h: Macros from breakpoint.c. Conditionalize based on
TARGET_HAS_HARDWARE_WATCHPOINTS.
* i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS
instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
code.
* config/i386/nm-linux.h, config/mips/nm-irix4.h,
config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define
TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
out by autoconf.
* config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
* Makefile.in, configure.in: Converted to use autoconf
* aclocal.m4: New file, local autoconf macro definitions.
* configure: New file, generated with autoconf 2.3.
