* target.h (struct target_ops): New field to_auxv_parse.
* auxv.c (default_auxv_parse): New, renamed from previous
target_auxv_parse.
(target_auxv_parse): Try to call target method. Fallback to
default_auxv_parse if not found.
* procfs.c (procfs_auxv_parse): New.
(init_procfs_ops): On Solaris, in 64-bit mode, install
procfs_auxv_parse.
* parse.c (parse_exp_in_context): Don't override
expression_context_pc if get_selected_block returned a valid
block.
gdb/testsuite/
* gdb.base/macscp.exp, gdb.base/macscp1.c: Add test for printing
expressions with macros.
* Makefile.in (ppc_linux_tdep_h): New macro.
(powerpc_32l_c, powerpc_altivec32_c, powerpc_altivec32l_c): Likewise.
(powerpc_64l_c, powerpc_altivec64_c, powerpc_altivec64l_c): Likewise.
(powerpc_e500l_c): Likewise.
(ppc-linux-nat.o): Update dependencies.
(ppc-linux-tdep.o): Update dependencies.
(rs6000-tdep.o): Update dependencies.
* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Remove.
(ppc_linux_svr4_fetch_link_map_offsets): Remove.
(ppc_linux_gregset, ppc_linux_fpregset): Move to ppc-linux-tdep.h
(ppc_supply_reg, ppc_collect_reg): Add prototypes.
(tdesc_powerpc_e500): Remove.
* rs6000.c: Include "features/rs6000/powerpc-altivec32.c"
and "features/rs6000/powerpc-altivec64.c".
(ppc_supply_reg, ppc_collect_reg): Make global.
(variants): Use tdesc_powerpc_32 for "powerpc" and
tdesc_powerpc_altivec64 for "powerpc64".
(_initialize_rs6000_tdep): Initialize AltiVec descriptions.
* ppc-linux-tdep.h: New file.
* ppc-linux-tdep.c: Include "ppc-linux-tdep.c".
Include "features/rs6000/powerpc-32l.c".
Include "features/rs6000/powerpc-altivec32l.c".
Include "features/rs6000/powerpc-64l.c".
Include "features/rs6000/powerpc-altivec64l.c".
Include "features/rs6000/powerpc-e500l.c".
(ppc_linux_supply_gregset): New function.
(ppc_linux_collect_gregset): Handle orig_r3 and trap registers.
(ppc32_linux_gregset): Use ppc_linux_supply_gregset.
(ppc64_linux_gregset): Likewise.
(ppc_linux_sigtramp_cache): Handle orig_r3 and trap registers.
(ppc_linux_trap_reg_p): New function.
(ppc_linux_write_pc): New function.
(ppc_linux_core_read_description): New function.
(ppc_linux_init_abi): Install ppc_linux_write_pc and
ppc_linux_core_read_description. Install orig_r3 and trap
registers if present in the target description.
(_initialize_ppc_linux_tdep): Initialize Linux target descriptions.
* ppc-linux-nat.c: Include "ppc-linux-tdep.h".
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_register_u_addr): Handle orig_r3 and trap registers.
(fetch_ppc_registers): Likewise.
(store_ppc_registers): Likewise.
(store_register): Likewise.
(ppc_linux_read_description): Check whether AltiVec is supported.
Check whether inferior is 32-bit or 64-bit. Return the appropriate
Linux target description.
* features/Makefile (WHICH): Use rs6000/powerpc-32l and
rs6000/powerpc-altivec32l instead of rs6000/powerpc-32.
Use rs6000/powerpc-64l and rs6000/powerpc-altivec64l instead
of rs6000/powerpc-64. Use rs6000/powerpc-e500l instead of
rs6000/powerpc-e500. Update -expedite variables accordingly.
* features/rs6000/power-spe.xml: Use regnum 73 for "acc".
* features/rs6000/powerpc-32.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-64.xml: Do not include power-altivec.xml.
* features/rs6000/powerpc-e500.c: Regenerate.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.
* features/rs6000/power-linux.xml: New file.
* features/rs6000/power64-linux.xml: New file.
* features/rs6000/powerpc-32l.xml: New file.
* features/rs6000/powerpc-altivec32l.xml: New file.
* features/rs6000/powerpc-64l.xml: New file.
* features/rs6000/powerpc-altivec64l.xml: New file.
* features/rs6000/powerpc-e500l.xml: New file.
* features/rs6000/powerpc-32l.c: New (generated) file.
* features/rs6000/powerpc-altivec32l.c: New (generated) file.
* features/rs6000/powerpc-64l.c: New (generated) file.
* features/rs6000/powerpc-altivec64l.c: New (generated) file.
* features/rs6000/powerpc-e500l.xml: New (generated) file.
* regformats/reg-ppc.dat: Remove.
* regformats/reg-ppc64.dat: Remove.
* regformats/rs6000/powerpc-32.dat: Remove.
* regformats/rs6000/powerpc-64.dat: Remove.
* regformats/rs6000/powerpc-e500.dat: Remove.
* regformats/rs6000/powerpc-32l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec32l.dat: New (generated) file.
* regformats/rs6000/powerpc-64l.dat: New (generated) file.
* regformats/rs6000/powerpc-altivec64l.dat: New (generated) file.
* regformats/rs6000/powerpc-e500l.dat: New (generated) file.
gdbserver/ChangeLog:
* configure.srv (powerpc*-*-linux*): Set srv_regobj to
powerpc-32l.o, powerpc-altivec32l.o, powerpc-e500l.o,
powerpc-64l.o, and powerpc-altivec64l.o.
Remove rs6000/powerpc-32.xml, rs6000/powerpc-64.xml, and
rs6000/powerpc-e500.xml; add rs6000/powerpc-32l.xml,
rs6000/powerpc-altivec32l.xml, rs6000/powerpc-e500l.xml,
rs6000/powerpc-64l.xml, rs6000/powerpc-altivec64l.xml,
rs6000/power-linux.xml, and rs6000/power64-linux.xml
to srv_xmlfiles.
* Makefile.in (reg-ppc.o, reg-ppc.c): Remove, replace by ...
(powerpc-32l.o, powerpc-32l.c): ... these new rules.
(powerpc-32.o, powerpc-32.c): Remove, replace by ...
(powerpc-altivec32l.o, powerpc-altivec32l.c): ... these new rules.
(powerpc-e500.o, powerpc-e500.c): Remove, replace by ...
(powerpc-e500l.o, powerpc-e500l.c): ... these new rules.
(reg-ppc64.o, reg-ppc64.c): Remove, replace by ...
(powerpc-64l.o, powerpc-64l.c): ... these new rules.
(powerpc-64.o, powerpc-64.c): Remove, replace by ...
(powerpc-altivec64l.o, powerpc-altivec64l.c): ... these new rules.
(clean): Update.
* linux-ppc-low.c (init_registers_ppc): Remove, replace by ...
(init_registers_powerpc_32l): ... this new prototype.
(init_registers_powerpc_32): Remove, replace by ...
(init_registers_powerpc_altivec32l): ... this new prototype.
(init_registers_powerpc_e500): Remove, replace by ...
(init_registers_powerpc_e500l): ... this new prototype.
(init_registers_ppc64): Remove, replace by ...
(init_registers_powerpc_64l): ... this new prototype.
(init_registers_powerpc_64): Remove, replace by ...
(init_registers_powerpc_altivec64l): ... this new prototype.
(ppc_num_regs): Set to 73.
(PT_ORIG_R3, PT_TRAP): Define if necessary.
(ppc_regmap, ppc_regmap_e500): Add values for orig_r3 and trap.
(ppc_cannot_store_register): Handle orig_r3 and trap.
(ppc_arch_setup): Update init_registers_... calls.
(ppc_fill_gregset): Handle orig_r3 and trap.
* inferiors.c (clear_inferiors): Reset current_inferior.
* elf.c (rewrite_elf_program_header): Rather than clearing
p_paddr_valid at end, don't set it in the first place. Delete
comment no longer relevant. When not p_paddr_valid, don't set
paddr from vaddr, and don't set p_vaddr_offset.
(minsym_found): Handle minimal symbols pointing to function
descriptors. Use find_function_start_pc.
* minsyms.c (msymbol_objfile): New function.
* parse.c (write_exp_msymbol): Handle minimal symbols pointing
to function descriptors.
* symtab.c (fixup_section): Only use minimal symbol at the same
address to determine section of a symbol.
(find_function_start_pc): New function.
(find_function_start_sal): Use it.
* symtab.h (msymbol_objfile): Add prototype.
(find_function_start_pc): Likewise.
* value.c: Include "objfiles.h".
(value_fn_field): Handle minimal symbols pointing to function
descriptors.
* Makefile.in (linespec.o): Update dependencies.
(value.o): Likewise.
TYPE_CODE_BOOL and TYPE_CODE_CHAR the same as TYPE_CODE_INT.
Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
Handle TYPE_CODE_METHOD the same as TYPE_CODE_FUNC.
Allow typedefs when checking for function pointer arguments.
Right-align small structs passed on the stack.
(ppc64_sysv_abi_return_value): Handle TYPE_CODE_BOOL and
TYPE_CODE_CHAR the same as TYPE_CODE_INT.
Handle TYPE_CODE_REF the same as TYPE_CODE_PTR.
(arm_force_mode_string, arm_show_fallback_mode)
(arm_show_force_mode): New.
(arm_pc_is_thumb): Honor fallback-mode and force-mode. Use
arm_frame_is_thumb.
(_initialize_arm_tdep): Add "set arm fallback-mode"
and "set arm force-mode".
* NEWS: Document new commands.
* gdb.texinfo (ARM): Document set/show arm fallback-mode
and set/show arm force-mode.
to_watchpoint_addr_within_range.
(target_watchpoint_addr_within_range): New function.
* target.c (update_current_target): Inherit
to_watchpoint_addr_within_range, defaulting to
default_watchpoint_addr_within_range.
(default_watchpoint_addr_within_range): New function.
(debug_to_watchpoint_addr_within_range): New function.
(setup_target_debug): Set to_watchpoint_addr_within_range.
* ppc-linux-nat.c (ppc_linux_watchpoint_addr_within_range):
New function.
(_initialize_ppc_linux_nat): Set to_watchpoint_addr_within_range.
* breakpoint.c (watchpoints_triggered): Use
target_watchpoint_addr_within_range.
* gdbint.texinfo (Algorithms): Describe
target_watchpoint_addr_within_range.
* breakpoint.c (create_breakpoint): Add breakpoint_ops argument and
assign its value to the breakpoint created.
(create_breakpoints): Add breakpoint_ops argument and pass it
to create_breakpoint call.
(break_command_really): Add breakpoint_ops argument and pass/assign
appropriately.
(break_command_1): Pass NULL as ops argument.
(set_breakpoint): Pass NULL as ops argument.
(print_one_exception_catchpoint): Print <PENDING> if no loc available.
(handle_gnu_v3_exceptions): Call generic breakpoint code to insert
catch and throw catchpoints.
* corelow.c (core_open): Use gdbarch_target_signal_from_host to
translate signal numeric value from the target to GDB's enum
target_signal.
* gdbarch.c, gdbarch.h: Regenerated.
* gdbarch.sh: Added two new functions target_signal_from_host and
target_signal_to_host.
* target.h (default_target_signal_from_host,
default_target_signal_to_host): New functions - declarations.
* signals/signals.c (struct gdbarch): New declaration.
(default_target_signal_to_host, default_target_signal_from_host): New
functions.
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
* arm-tdep.c (arm_frame_is_thumb): New.
(arm_pc_is_thumb): Clarify comment.
(thumb_analyze_prologue): Remove PC special case.
(thumb_scan_prologue): Take a block_addr argument. Use it for
find_pc_partial_function. Remove unused variables.
(arm_scan_prologue): Use arm_frame_is_thumb. Use the block address
for find_pc_partial_function. Remove PC special case.
(arm_prologue_prev_register): Add special handling for PC and CPSR.
(arm_dwarf2_prev_register, arm_dwarf2_frame_init_reg): New.
(arm_get_next_pc): Use arm_frame_is_thumb.
(arm_write_pc): Use CPSR_T instead of 0x20.
(arm_gdbarch_init): Call dwarf2_frame_set_init_reg.
* arm-tdep.h (enum gdb_regnum): Add ARM_CPSR_REGNUM.
(CPSR_T): Define.
* dwarf2-frame.c (dwarf2_frame_prev_register): Handle
DWARF2_FRAME_REG_FN.
* dwarf2-frame.h (enum dwarf2_frame_reg_rule): Add
DWARF2_FRAME_REG_FN.
(struct dwarf2_frame_state_reg): Add FN to loc union.
* gdb.arch/thumb-prologue.exp: Do not expect a saved PC.
