gdb/testsuite/
2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
* gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
The powerpc64le-linux ABI specifies that when a 128-bit DFP value is
passed in a pair of floating-point registers, the first register holds
the most-significant part of the value. This is as opposed to the
usual rule on little-endian systems, where the first register would
hold the least-significant part.
This affects two places in GDB, the read/write routines for the
128-bit DFP pseudo-registers, and the function call / return
sequence. For the former, current code already distinguishes
between big- and little-endian targets, but gets the latter
wrong. This is presumably because *GCC* also got it wrong,
and GDB matches the old GCC behavior. But GCC is now fixed:
http://gcc.gnu.org/ml/gcc-patches/2013-11/msg02145.html
so GDB needs to be fixed too. (Old code shouldn't really be
an issue since there is no code "out there" so far that uses
dfp128 on little-endian ...)
gdb/ChangeLog:
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
within a register pair holding a DFP 128-bit value on little-endian.
(ppc64_sysv_abi_return_value_base): Likewise.
* rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
(dfp_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
Many VSX test were failing on powerpc64le-linux, since -as opposed to the
AltiVec tests- there never were little-endian versions of the test patterns.
This patch adds such patterns, along the lines of altivec-regs.exp.
In addition, there is an actual code change required: For those VSX
registers that overlap a floating-point register, the FP register
overlaps the most-significant half of the VSX register both on big-
and little-endian systems. However, on little-endian systems, that
half is stored at an offset of 8 bytes (not 0). This works already
for the "real" FP registers, but current code gets it wrong for
the "extended" pseudo FP register GDB generates for the second
half of the VSX register bank.
This patch updates the corresponding pseudo read/write routines
to take the appropriate offset into consideration.
gdb/ChangeLog:
* rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
of the overlapped FP register within the VSX register on little-
endian platforms.
(efpr_pseudo_register_write): Likewise.
gdb/testsuite/ChangeLog:
* gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
of the test patterns for use on little-endian systems.
A couple of AltiVec tests fail spuriously on powerpc64le-linux, because
they compare against an incorrect pattern. Note that those tests already
contain little-endian variants of the patterns, but those seem to have
bit-rotted a bit: when outputting a vector, GDB no longer omits trailing
zero elements (as it used to do in the past).
This patch updates the pattern to the new GDB output behavior.
In addition, the patch updates the endian test to use the new
gdb_test_multiple logic instead of gdb_expect.
gdb/testsuite/ChangeLog:
* gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
(decimal_vector): Fix for little-endian.
breakpoint is set in a `ta 0x6d´ which is not a sigreturn syscall. In
these cases no rt_frame exists in the stack and thus the read PC is
wrong.
ChangeLog
2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
the sigreturn register save area only if the syscall is
sigreturn.
testsuite/ChangeLog
2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.arch/sparc-sysstep.exp: New file.
* gdb.arch/sparc-sysstep.c: Likewise.
* gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
Correct the patterns in the gdb_test_multiple invocation.
testsuite/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-multiarch.exp (test_linux_v2): Add $gdb_prompt to
the patterns in gdb_test_multiple.
This fixes parts of gdb.arch to be parallel-safe.
I only changed the bits I could test on this machine.
I don't have access to many of the machines needed to fully switch
gdb.arch; but I am happy to provide advice to others attempting this.
Or, I can send an untested patch to convert it all.
Tested on x86-64 Fedora 18.
* gdb.arch/amd64-byte.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-disp-step.exp: Use standard_testfile.
* gdb.arch/amd64-dword.exp: Use standard_testfile,
clean_restart.
* gdb.arch/amd64-entry-value-param.exp: Use standard_testfile.
* gdb.arch/amd64-entry-value.exp: Use standard_testfile.
* gdb.arch/amd64-prologue-xmm.exp: Use standard_testfile.
* gdb.arch/amd64-word.exp: Use standard_testfile,
clean_restart.
* gdb.arch/i386-avx.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-byte.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-disp-step.exp: Use standard_testfile.
* gdb.arch/i386-dr3-watch.exp: Use standard_testfile.
* gdb.arch/i386-permbkpt.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-signal.exp: Use standard_testfile.
* gdb.arch/i386-size-overlap.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-sse.exp: Use standard_testfile, clean_restart.
* gdb.arch/i386-unwind.exp: Use standard_testfile.
* gdb.arch/i386-word.exp: Use standard_testfile, clean_restart.
We've currently got 3 files doing open coded implementations of cpuid.
Each has its own set of workarounds and varying levels of how well
they're written and are generally hardcoded to specific cpuid functions.
If you try to build the latest gdb as a PIE on an i386 system, the build
will fail because one of them lacks PIC workarounds (wrt ebx).
Specifically, we have:
common/linux-btrace.c:
two copies of cpuid asm w/specific args, one has no workarounds
while the other implicitly does to avoid memcpy
go32-nat.c:
two copies of cpuid asm w/specific args, one has workarounds to
avoid memcpy
gdb/testsuite/gdb.arch/i386-cpuid.h:
one general cpuid asm w/many workarounds copied from older gcc
Fortunately, that last header there is pretty damn good -- it handles
lots of edge cases, the code is nice & tight (uses gcc asm operands
rather than manual movs), and is already almost a general library type
header. It's also the basis of what is now the public cpuid.h that is
shipped with gcc-4.3+.
So what I've done is pull that test header out and into gdb/common/
(not sure if there's a better place), synced to the version found in
gcc-4.8.0, put a wrapper API around it, and then cut over all the
existing call points to this new header.
Since the func already has support for "is cpuid supported on this proc",
it makes it trivial to push the i386/x86_64 ifdefs down into this wrapper
API too. Now it can be safely used for all targets and gcc will elide
the unused code for us.
I've verified the gdb.arch testsuite still passes, and this code compiles
for an armv7a host as well as x86_64. The go32-nat code has been left
ifdef-ed out until someone can test & verify the new stuff works (and if
it doesn't, figure out how to make the new code work).
URL: https://bugs.gentoo.org/467806
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The test case gdb.arch/system-gcore.exp is almost an identical copy of
gdb.base/gcore.exp. The only functional change is the additional
comparison of the "info reg system" command output.
It should be safe to perform this comparison on all architectures.
Thus the patch removes the arch-specific version and adds "info reg
system" to the common gcore test case instead.
Tested on i686-linux and s390x-linux.
gdb/testsuite/Changelog:
2013-05-07 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/system-gcore.exp: Remove.
* gdb.arch/gcore.c: Remove.
* gdb.base/gcore.exp: Add "info reg system".
--enable-64-bit-bfd. Basically the issue happens when dealing with "bl"
instructions: GDB does branch destination calculation and (wrongly)
sign-extends the PC. Here is a piece of his original message explaining
the problem:
> next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
>
> /* The Linux kernel offers some user-mode helpers in a high page. We can
> not read this page (as of 2.6.23), and even if we could then we couldn't
> set breakpoints in it, and even if we could then the atomic operations
> would fail when interrupted. They are all called as functions and return
> to the address in LR, so step to there instead. */
> if (next_pc > 0xffff0000)
> next_pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
>
> arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
>
> Unfortunately, branch destination addresses are SIGN EXTENDED to 64
> bits. So,
>
> (top-gdb) p/x next_pc
> $14 = 0xffffffffb6df2864
>
> Which triggers the next_pc = get_frame_register_unsigned(), and we
> cannot step into any branches because the destination PC is wrong.
Anyway, the fix is simple and Andrew himself provided it for us. It
took a while for me to figure out how to trigger the bug (in order to
write a testcase for it), but I finally made it.
The attached patch fixes the problem (by casting to `unsigned long'
instead of just `long'), and also includes a testcase to reproduce the
issue.
gdb/ChangeLog:
2013-04-22 Andrew Haley <aph@redhat.com>
* arm-tdep.c (BranchDest): Cast result as "unsigned long",
instead of "long".
gdb/testsuite/ChangeLog:
2013-04-22 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/arm-bl-branch-dest.c: New file.
* gdb.arch/arm-bl-branch-dest.exp: Likewise.
Consider the following simple program:
.globl _start
.text
_start:
fldt val
.data
val: .byte 0x00,0x00,0x45,0x07,0x11,0x19,0x22,0xe9,0xfe,0xbf
With current GDB on x86-64 GNU/Linux hosts, after the moment the fldt
command has been executed the register st(0) looks like this,
according to the “info regs” output (TOP=7):
R7: Valid 0xffffffbffffffffeffffffe922191107450000 -0.910676542908976927
which is clearly wrong (just count its length). The problem is due to
the printf statement (see patch) printing a promoted integer value of
a char argument "raw[i]", and, since char is signed on x86-64
GNU/Linux, the erroneous “ffffff” are printed for the first three
bytes which turn out to be "negative". The fix is to use gdb_byte
instead which is unsigned (and is the type of value_contents(), the
type to be used for raw target bytes anyway). After the fix the value
will be printed correctly:
R7: Valid 0xbffee922191107450000 -0.910676542908976927
gdb/
2013-04-19 Vladimir Kargov <kargov@gmail.com>
Pedro Alves <palves@redhat.com>
* i387-tdep.c (i387_print_float_info): Use gdb_byte for pointer to
value contents.
gdb/testsuite/
2013-04-19 Vladimir Kargov <kargov@gmail.com>
Pedro Alves <palves@redhat.com>
* gdb.arch/i386-float.S: New file.
* gdb.arch/i386-float.exp: New file.
Fix entry-values if the callee called a noreturn function.
* dwarf2-frame-tailcall.c (dwarf2_tailcall_sniffer_first): Use
get_frame_address_in_block. Add new comment.
gdb/testsuite/
Fix entry-values if the callee called a noreturn function.
* gdb.arch/amd64-tailcall-noret.S: New file.
* gdb.arch/amd64-tailcall-noret.c: New file.
* gdb.arch/amd64-tailcall-noret.exp: New file.
Fix entry-values in C++ across CUs.
* dwarf2loc.c (call_site_to_target_addr) <FIELD_LOC_KIND_PHYSNAME>: Use
lookup_minimal_symbol. Add a comment.
* dwarf2read.c
(read_call_site_scope) <is_ref_attr> <die_is_declaration>: Prefer
DW_AT_linkage_name.
gdb/testsuite/
Fix entry-values in C++ across CUs.
* gdb.arch/amd64-tailcall-cxx.exp: New file.
* gdb.arch/amd64-tailcall-cxx1.S: New file.
* gdb.arch/amd64-tailcall-cxx1.cc: New file.
* gdb.arch/amd64-tailcall-cxx2.S: New file.
* gdb.arch/amd64-tailcall-cxx2.cc: New file.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Update some files in GDB that were accidently left with a GPL v2
copyright header.
Update some files where the copyright notice still provides the
old contact info, using the approach for providing the FSF's contact
info.
gdb/ChangeLog:
* acinclude.m4: Update contact info in copyright notice.
gdb/doc/ChangeLog:
* refcard.tex: Update copyright notice to GPL v3 or later.
Update contact info.
gdb/testsuite/ChangeLog:
* dg-extract-results.sh: Update contact info in copyright notice.
* gdb.arch/mips-octeon-bbit.exp: Update copyright notice to
GPL v3 or later. Update contact info.
* gdb.fortran/logical.f90, gdb.threads/watchpoint-fork-child.c,
gdb.threads/watchpoint-fork-mt.c,
gdb.threads/watchpoint-fork-parent.c,
gdb.threads/watchpoint-fork-st.c,
gdb.threads/watchpoint-fork.h: Likewise.
* gdb.python/py-strfns.exp (test_strfns_core_file): Use
gdb_gcore_cmd.
* gdb.cell/gcore.exp: Use gdb_gcore_cmd.
* gdb.base/gcore.exp: Use gdb_gcore_cmd.
* gdb.base/gcore-relro.exp: Use gdb_gcore_cmd.
* gdb.base/gcore-buffer-overflow.exp: Use gdb_gcore_cmd.
* gdb.base/auxv.exp: Use gdb_gcore_cmd.
* gdb.arch/vsx-regs.exp: Use gdb_gcore_cmd.
* gdb.arch/system-gcore.exp: Use gdb_gcore_cmd.
* gdb.arch/pa-nullify.exp (test_core_bt): Use gdb_gcore_cmd.
* lib/gdb.exp (gdb_gcore_cmd): New proc.
Fix disassemble without parameters in tailcall frame.
* cli/cli-cmds.c (disassemble_current_function): Use
get_frame_address_in_block.
gdb/testsuite/
Fix disassemble without parameters in tailcall frame.
* gdb.arch/amd64-entry-value.exp (down, disassemble): New tests.
PR 14119
* frame.c (skip_inlined_frames): Skip also TAILCALL_FRAME frames.
(frame_pop): Drop also TAILCALL_FRAME frames.
* infcmd.c (finish_command): Ignore also TAILCALL_FRAME frames.
gdb/testsuite/
PR 14119
* gdb.arch/amd64-tailcall-ret.S: New file.
* gdb.arch/amd64-tailcall-ret.c: New file.
* gdb.arch/amd64-tailcall-ret.exp: New file.
* gdb.reverse/amd64-tailcall-reverse.S: New file.
* gdb.reverse/amd64-tailcall-reverse.c: New file.
* gdb.reverse/amd64-tailcall-reverse.exp: New file.
* gdb.ada/rdv_wait.exp (set debug-file-directory): New command.
* gdb.arch/i386-cfi-notcurrent.S: New file.
* gdb.arch/i386-cfi-notcurrent.exp: New file.
* dwarf2expr.c (execute_stack_op): Support DW_OP_GNU_parameter_ref.
* dwarf2loc.c (call_site_parameter_matches): Support
CALL_SITE_PARAMETER_PARAM_OFFSET.
(needs_dwarf_reg_entry_value): Push stub value.
* dwarf2read.c (read_call_site_scope): New variable origin. Support
CALL_SITE_PARAMETER_PARAM_OFFSET and its DW_AT_abstract_origin.
* gdbtypes.h (enum call_site_parameter_kind): New item
CALL_SITE_PARAMETER_PARAM_OFFSET.
(struct call_site.parameter.u): New field param_offset.
gdb/testsuite/
* gdb.arch/amd64-entry-value-param.S: New file.
* gdb.arch/amd64-entry-value-param.c: New file.
* gdb.arch/amd64-entry-value-param.exp: New file.
* infrun.c (handle_inferior_event): Move the check for return
trampolines ahead of the check for function trampolines.
* mips-tdep.h (MIPS_S2_REGNUM, MIPS_GP_REGNUM): New macros.
* mips-tdep.c (mips_str_mips16_call_stub): New variable.
(mips_str_mips16_ret_stub): Likewise.
(mips_str_call_fp_stub): Likewise.
(mips_str_call_stub): Likewise.
(mips_str_fn_stub): Likewise.
(mips_str_pic): Likewise.
(mips_in_frame_stub): New function.
(mips_unwind_pc): Return the return address rather than the PC
if the PC of an intermediate frame is inside a call thunk.
(mips_is_stub_suffix): New function.
(mips_is_stub_mode): Likewise.
(mips_get_mips16_fn_stub_pc): Likewise.
(mips_skip_mips16_trampoline_code): Update to handle all the
currently generated stub types. Don't recurse into __fn_stub
thunks. Remove heuristics to handle stubs beyond etext/_etext.
Use cooked register accesses.
(mips_in_return_stub): Reintroduce function.
(mips_skip_trampoline_code): Traverse trampolines recursively.
(mips_gdbarch_init): Handle MIPS16 return trampolines.
gdb/testsuite/
* gdb.arch/mips16-thunks-inmain.c: New file.
* gdb.arch/mips16-thunks-main.c: New file.
* gdb.arch/mips16-thunks-sin.c: New file.
* gdb.arch/mips16-thunks-sinfrob.c: New file.
* gdb.arch/mips16-thunks-sinfrob16.c: New file.
* gdb.arch/mips16-thunks-sinmain.c: New file.
* gdb.arch/mips16-thunks-sinmips16.c: New file.
* gdb.arch/mips16-thunks.exp: New file.
Tom Tromey <tromey@redhat.com>
* lib/gdb.exp: Add description of test prefixes.
(with_test_prefix): New procedure.
* gdb.arch/altivec-abi.exp: Use with_test_prefix.
* gdb.base/attach-pie-misread.exp: Use with_test_prefix.
* gdb.base/break-interp.exp: Use with_test_prefix. Use append
instead of lappend to append to pf_prefix.
* gdb.base/catch-load.exp: Use with_test_prefix.
* gdb.base/disp-step-syscall.exp: Use with_test_prefix.
* gdb.base/jit-so.exp: Use with_test_prefix.
* gdb.base/jit.exp: Use with_test_prefix.
* gdb.base/return-nodebug.exp (do_test): Use append instead of
lappend to append to pf_prefix.
* gdb.base/sepdebug.exp: Use with_test_prefix.
* gdb.base/solib-display.exp: Use with_test_prefix.
* gdb.base/solib-overlap.exp: Use with_test_prefix.
* gdb.base/watch-cond-infcall.exp: Use with_test_prefix.
* gdb.base/watchpoint.exp: Use with_test_prefix.
* gdb.dwarf2/dw2-noloc.exp: Use with_test_prefix.
* gdb.mi/mi-watch.exp: Use with_test_prefix.
* gdb.mi/mi2-watch.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-1.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-2.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-3.exp: Use with_test_prefix.
* gdb.threads/non-ldr-exc-4.exp: Use with_test_prefix.
* gdb.threads/watchpoint-fork.exp: Use with_test_prefix. Use
append instead of lappend to append to pf_prefix.
* gdb.threads/watchthreads-reorder.exp: Use with_test_prefix.
* gdb.trace/change-loc.exp: Use with_test_prefix.
* gdb.trace/pending.exp: Use with_test_prefix.
* gdb.trace/status-stop.exp: Use with_test_prefix.
* gdb.trace/strace.exp: Use with_test_prefix.
* gdb.trace/trace-break.exp: Use with_test_prefix.
* gdb.trace/unavailable.exp: Use with_test_prefix. Use append
instead of lappend to append to pf_prefix.
* arm-tdep.c (thumb_analyze_prologue): Always fallback on the SP
register when the frame can't be determined.
* arm-tdep.c (arm_analyze_prologue): Ditto.
gdb/testsuite/
* gdb.arch/thumb-prologue.c (switch_stack_to_same): New test function.
(switch_stack_to_other): New test function.
* gdb.arch/thumb-prologue.exp: New test cases.
Display @entry parameter values even for references.
* ada-valprint.c (ada_val_print_1) <TYPE_CODE_REF>: Try also
coerce_ref_if_computed.
* c-valprint.c (c_val_print) <TYPE_CODE_REF>: Likewise.
* dwarf2expr.c (dwarf_block_to_dwarf_reg_deref): New function.
(execute_stack_op) <DW_OP_GNU_entry_value>: Add -1 deref_size to the
existing push_dwarf_reg_entry_value call. Add new detection calling
dwarf_block_to_dwarf_reg_deref. Update the error message.
(ctx_no_push_dwarf_reg_entry_value): New parameter deref_size.
* dwarf2expr.h
(struct dwarf_expr_context_funcs) <push_dwarf_reg_entry_value>: Add new
parameter deref_size, describe it in the comment.
(ctx_no_push_dwarf_reg_entry_value): Add new parameter deref_size.
(dwarf_block_to_dwarf_reg_deref): New declaration.
* dwarf2loc.c (dwarf_entry_parameter_to_value): Add new parameter
deref_size, describe it in the function comment. New variables
data_src and size, fetch the alternative block accoring to DEREF_SIZE.
(dwarf_expr_push_dwarf_reg_entry_value): Add new parameter deref_size,
describe it in the function comment. Fetch the alternative block
accoring to DEREF_SIZE.
(entry_data_value_coerce_ref, entry_data_value_copy_closure)
(entry_data_value_free_closure, entry_data_value_funcs): New.
(value_of_dwarf_reg_entry): New variables checked_type, target_type,
outer_val, target_val, val and addr. Try to fetch and create also
referenced value content.
(pieced_value_funcs): NULL value for coerce_ref.
(needs_dwarf_reg_entry_value): Add new parameter deref_size.
* f-valprint.c (f_val_print) <TYPE_CODE_REF>: Try also
coerce_ref_if_computed.
* opencl-lang.c (opencl_value_funcs): NULL value for coerce_ref.
* p-valprint.c (pascal_val_print) <TYPE_CODE_REF>: Likewise.
* stack.c (read_frame_arg): Compare also dereferenced values.
* value.c (value_computed_funcs): Make the parameter v const, use
value_lval_const for it.
(value_lval_const, coerce_ref_if_computed): New function.
(coerce_ref): New variable retval. Call also coerce_ref_if_computed.
* value.h (struct lval_funcs): New field coerce_ref.
(value_computed_funcs): Make the parameter v const.
(value_lval_const, coerce_ref_if_computed): New declarations.
gdb/testsuite/
Display @entry parameter values even for references.
* gdb.arch/amd64-entry-value.cc (reference, datap, datap_input): New
functions.
(main): New variables regvar, nodatavarp, stackvar1, stackvar2. Call
reference and datap_input.
* gdb.arch/amd64-entry-value.exp (reference, breakhere_reference): New
breakpoints.
(continue to breakpoint: entry_reference: reference)
(entry_reference: bt at entry)
(continue to breakpoint: entry_reference: breakhere_reference)
(entry_reference: bt, entry_reference: ptype regparam)
(entry_reference: p regparam, entry_reference: ptype regparam@entry)
(entry_reference: p regparam@entry, entry_reference: p ®param@entry)
(entry_reference: p regcopy, entry_reference: p nodataparam)
(entry_reference: p nodataparam@entry): New tests.
Display @entry parameter values (without references).
* dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New functions.
* dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New declarations.
* dwarf2loc.c (dwarf2_find_location_expression): Support location list
entry record.
(dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry)
(value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New
functions.
(dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry.
(loclist_read_variable_at_entry): New function.
(dwarf2_loclist_funcs): Install loclist_read_variable_at_entry.
* dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in
DW_AT_location, call dwarf_block_to_sp_offset for it.
* frame.h (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values): New declarations.
(struct frame_arg): New field entry_kind.
(read_frame_arg): New parameter entryargp.
* mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for
arg->entry_kind. Optionally print the `@entry' suffix.
(list_args_or_locals): New variable entryarg, initialize it.
Initialize also entry_kind of arg and entryarg. Conditionalize
list_arg_or_local for arg, add list_arg_or_local for entryarg. Call
xfree for entryarg.error.
* stack.c (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values_choices)
(print_entry_values): New variables.
(print_frame_arg): New gdb_assert for arg->entry_kind. Optionally
print the `@entry' suffix, possibly in combination for
print_entry_values_compact.
(read_frame_arg): New parameter entryargp, new variables entryval,
entryval_error and val_equal. Read in also entryargp, respect
print_entry_values, compare the values using val_equal, fill in also
argp->entry_kind (together with entryargp->entry_kind).
(print_frame_args): New variable entryarg, initialize it.
Conditionalize print_frame_arg for arg, add print_frame_arg for
entryarg. Call xfree for entryarg.error.
(_initialize_stack): Call add_setshow_enum_cmd for `entry-values'.
* symtab.h (struct symbol_computed_ops): New field
read_variable_at_entry.
gdb/doc/
Display @entry parameter values (without references).
* gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call
example.
(Print Settings): New description of set print entry-values and show
print entry-values.
gdb/testsuite/
Display @entry parameter values (without references).
* gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2)
(different, validity, invalid): New functions.
(main): Call them.
* gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr,
stacktest, breakhere_stacktest, different, breakhere_different,
breakhere_validity and breakhere_invalid.
(entry: bt): Update for @entry.
(entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *)
(entry_validity: *, entry_invalid: *): Many new tests.
* gdb.base/break.exp
(run until breakpoint set at small function, optimized file): Accept
also the @entry suffix.
* gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value.
* gdb.mi/mi2-amd64-entry-value.c: New files.
* gdb.mi/mi2-amd64-entry-value.exp: New files.
Implement basic support for DW_TAG_GNU_call_site.
* block.c: Include gdbtypes.h and exceptions.h.
(call_site_for_pc): New function.
* block.h (call_site_for_pc): New declaration.
* defs.h: Include hashtab.h.
(make_cleanup_htab_delete, core_addr_hash, core_addr_eq): New
declarations.
* dwarf2-frame.c (dwarf2_frame_ctx_funcs): Install
ctx_no_push_dwarf_reg_entry_value.
* dwarf2expr.c (read_uleb128, read_sleb128): Support R as NULL.
(dwarf_block_to_dwarf_reg): New function.
(execute_stack_op) <DW_OP_GNU_entry_value>: Implement it.
(ctx_no_push_dwarf_reg_entry_value): New function.
* dwarf2expr.h (struct dwarf_expr_context_funcs): New field
push_dwarf_reg_entry_value.
(ctx_no_push_dwarf_reg_entry_value, dwarf_block_to_dwarf_reg): New
declarations.
* dwarf2loc.c: Include gdbcmd.h.
(dwarf_expr_ctx_funcs): New forward declaration.
(entry_values_debug, show_entry_values_debug, call_site_to_target_addr)
(dwarf_expr_reg_to_entry_parameter)
(dwarf_expr_push_dwarf_reg_entry_value): New.
(dwarf_expr_ctx_funcs): Install dwarf_expr_push_dwarf_reg_entry_value.
(dwarf2_evaluate_loc_desc_full): Handle NO_ENTRY_VALUE_ERROR.
(needs_dwarf_reg_entry_value): New function.
(needs_frame_ctx_funcs): Install it.
(_initialize_dwarf2loc): New function.
* dwarf2loc.h (entry_values_debug): New declaration.
* dwarf2read.c (struct dwarf2_cu): New field call_site_htab.
(read_call_site_scope): New forward declaration.
(process_full_comp_unit): Copy call_site_htab.
(process_die): Support DW_TAG_GNU_call_site.
(read_call_site_scope): New function.
(dwarf2_get_pc_bounds): Support NULL HIGHPC.
(dwarf_tag_name): Support DW_TAG_GNU_call_site.
(cleanup_htab): Delete.
(write_psymtabs_to_index): Use make_cleanup_htab_delete instead of it.
* exceptions.h (enum errors): New NO_ENTRY_VALUE_ERROR.
* gdb-gdb.py (StructMainTypePrettyPrinter): Support
FIELD_LOC_KIND_DWARF_BLOCK.
* gdbtypes.h (enum field_loc_kind): New entry
FIELD_LOC_KIND_DWARF_BLOCK.
(struct main_type): New loc entry dwarf_block.
(struct call_site, FIELD_DWARF_BLOCK, SET_FIELD_DWARF_BLOCK)
(TYPE_FIELD_DWARF_BLOCK): New.
* python/py-type.c: Include dwarf2loc.h.
(check_types_equal): Support FIELD_LOC_KIND_DWARF_BLOCK. New
internal_error call on unknown FIELD_LOC_KIND.
* symtab.h (struct symtab): New field call_site_htab.
* utils.c (do_htab_delete_cleanup, make_cleanup_htab_delete)
(core_addr_hash, core_addr_eq): New functions.
gdb/testsuite/
Implement basic support for DW_TAG_GNU_call_site.
* gdb.arch/Makefile.in (EXECUTABLES): Add amd64-entry-value.
* gdb.arch/amd64-entry-value.cc: New file.
* gdb.arch/amd64-entry-value.exp: New file.
PR breakpoints/12435
* amd64-tdep.c (amd64_skip_prologue): New variables start_pc_sal,
next_sal, buf, offset and xmmreg. Advance PC if it sees the PR.
* dwarf2read.c (process_full_comp_unit): Initialize
amd64_prologue_line_bug.
* symtab.h (struct symtab): New field amd64_prologue_line_bug.
gdb/testsuite/
PR breakpoints/12435
* gdb.arch/amd64-prologue-xmm.c: New file.
* gdb.arch/amd64-prologue-xmm.exp: New file.
* gdb.arch/amd64-prologue-xmm.s: New file.
gdb/testsuite/
* gdb.arch/i386-dr3-watch.exp: Test that the i386 watchpoints
backend doesn't leave used debug registers behind.
gdb/gdbserver/
* i386-low.c (i386_insert_aligned_watchpoint): Don't pass the info
to the inferior here.
(i386_remove_aligned_watchpoint): Ditto.
(i386_handle_nonaligned_watchpoint): Return immediate on fail to
fit part of the watchpoint in the debug registers.
(i386_update_inferior_debug_regs): New.
(i386_low_insert_watchpoint): Work on a local mirror of the debug
registers, and only update the inferior on success.
(i386_low_remove_watchpoint): Ditto.
gdb/
* i386-nat.c (I386_DR_VACANT, I386_DR_LOCAL_ENABLE)
(I386_DR_GLOBAL_ENABLE, I386_DR_DISABLE, I386_DR_SET_RW_LEN)
(I386_DR_GET_RW_LEN, I386_DR_WATCH_HIT): Add state parameter and
adjust.
(dr_mirror, dr_status_mirror, dr_control_mirror): Delete.
(struct i386_debug_reg_state): New.
(i386_init_dregs): New.
(dr_mirror): New.
(i386_cleanup_dregs): Use i386_init_dregs.
(i386_show_dr): Add state parameter and adjust.
(i386_insert_aligned_watchpoint): Ditto. Don't pass the info to
the inferior here.
(i386_remove_aligned_watchpoint): Likewise.
(i386_handle_nonaligned_watchpoint): Add state parameter and adjust.
(i386_update_inferior_debug_regs): New.
(i386_insert_watchpoint): Work on a local mirror of the debug
registers, and only update the inferior on success.
(i386_remove_watchpoint): Ditto.
(i386_region_ok_for_watchpoint): Adjust.
(i386_stopped_data_address): Adjust.
(i386_insert_hw_breakpoint): Adjust.
(i386_remove_hw_breakpoint): Adjust.
gdb/gdbserver/
* linux-x86-low.c (i386_dr_low_get_addr): Fix off by one in
assertion.
* win32-i386-low.c (i386_dr_low_get_addr): Ditto.
gdb/testsuite/
* gdb.arch/i386-dr3-watch.c: New file.
* gdb.arch/i386-dr3-watch.exp: New file.
gdb/testsuite/
* gdb.ada/start.exp: Call untested with the correct test filename.
* gdb.arch/i386-bp_permanent.exp: Call untested with the correct
test filename. Make the test's binary unique.
* gdb.arch/i386-signal.exp: Call untested with the correct test
filename.
* gdb.arch/i386-size-overlap.exp: Ditto.
* gdb.arch/Makefile.in (EXECUTABLES): Update.
* gdb.base/gcore-buffer-overflow.exp: Ditto.
* gdb.cp/call-c.exp: Ditto.
* gdb.mi/mi-reverse.exp: Call untested with the correct test
filename. Make the test's binary unique.
* gdb.mi/Makefile.in (EXECUTABLES): Update.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/Makefile.in (EXECUTABLES): Update.
* gdb.reverse/i386-precsave.exp: Ditto.
* gdb.reverse/i387-env-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/i387-stack-reverse.exp: Ditto.
* gdb.reverse/sigall-precsave.exp: Ditto. Make the test's binary
unique.
* gdb.reverse/sigall-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/Makefile.in (EXECUTABLES): Update.
* gdb.trace/tfile.exp: Ditto.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
for the "generic" vector ABI used with GCC 4.3 and later.
(ppc64_sysv_abi_return_value): Likewise.
gdb/testsuite:
* gdb.arch/altivec-abi.exp: Skip "generic" tests on 64-bit when
using a GCC 4.1 or 4.2 compiler. Add an additional test variant
"generic ABI, auto".
(altivec_abi_tests): Accept vectors returned by reference.
PR tdep/12352
* arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
order to store PC value on stack instead of text section.
2011-02-15 Yao Qi <yao@codesourcery.com>
PR tdep/12352
* gdb.arch/arm-disp-step.S : New test for str instruction.
* gdb.arch/arm-disp-step.exp : Likewise
* rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
the EFP register set size.
(efpr_pseudo_register_read): Use regcache_raw_read_part to read
data from the VMX register.
(efpr_pseudo_register_write): Use regcache_raw_write_part to read
and write data from/to the VMX register.
gdb/testsuite/
* gdb.arch/vsx-regs.exp: Add "vector_register1_vr" and
"vector_register2_vr" test strings. Test the extended floating
point registers (F32~F63).
* lib/gdb.exp (skip_vsx_tests): Update compile flags for the
IBM XL C compiler. Make the test program use a register provided
by the compiler for the lxvd2x instruction.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
correct ABI for AltiVec vector arguments.
testsuite/ChangeLog:
* gdb.arch/altivec-abi.c (vec_func): Make use of intv_on_stack_f
when computing result.
* gdb.arch/altivec-abi.exp: Update expected results.
registers. Update data sets with the new v2_double element in the
VSX register union. Add vector_register3_vr data set for the AltiVec
registers. Use gdb_test_no_output instead of send_gdb.
gdb
* c-valprint.c (c_val_print): Fix printing of character vectors.
gdb/testsuite
* gdb.arch/altivec-abi.exp: Fix expect pattern of character vectors.
* spu-multiarch.c (spu_xfer_partial): Wrap around local store
limit on local store memory accesses.
* spu-linux-nat.c (spu_xfer_partial): Likewise.
* spu-tdep.c (spu_lslr): Remove.
(spu_pointer_to_address): Do not truncate addresses.
(spu_integer_to_address): Likewise.
(spu_overlay_new_objfile): Use SPU_OVERLAY_LMA.
* spu-tdep.h: Add comments.
(SPUADDR_SPU): Respect SPU_OVERLAY_LMA bit.
(SPU_OVERLAY_LMA): Define.
gdbserver/ChangeLog:
* spu-low.c (spu_read_memory): Wrap around local store limit.
(spu_write_memory): Likewise.
testsuite/ChangeLog:
* gdb.arch/spu-ls.exp: New file.
* gdb.arch/spu-ls.c: Likewise.
arm_pc_is_thumb.
(arm_pc_is_thumb): Use arm_find_mapping_symbol.
(extend_buffer_earlier): New function.
(MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants.
(arm_adjust_breakpoint_address): New function.
(arm_gdbarch_init): Register arm_adjust_breakpoint_address.
testsuite/
* gdb.arch/thumb2-it.S (it_breakpoints): New function.
* gdb.arch/thumb2-it.exp (test_it_break): New function.
(Top level): Call it.
(arm_linux_thumb2_le_breakpoint): New constants.
(arm_linux_init_abi): Set thumb2_breakpoint and
thumb2_breakpoint_size.
* arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
(thumb_get_next_pc): Add a comment. Rename IT to ITSTATE.
Implement support for single stepping through IT blocks if
a 32-bit Thumb breakpoint instruction is available.
(arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
is available, use it when needed.
(arm_remote_breakpoint_from_pc): New function.
(arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
* arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
comment. Add thumb2_breakpoint and thumb2_breakpoint_size.
gdbserver/
* linux-arm-low.c (thumb_breakpoint_len): Delete.
(thumb2_breakpoint): New.
(arm_breakpoint_at): Check for Thumb-2 breakpoints.
testsuite/
* gdb.arch/thumb2-it.S, gdb.arch/thumb2-it.exp: New files.
