With the S390 vector ABI, vector registers are used for passing vector
arguments and for returning a vector. Support this ABI in inferior
function calls and when setting or retrieving a function's return
value.
gdb/ChangeLog:
* s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
(enum s390_vector_abi_kind): New enum.
(struct gdbarch_tdep)<vector_abi>: New field.
(s390_effective_inner_type): Add parameter min_size. Stop
unwrapping if the inner type is smaller than min_size.
(s390_function_arg_float): Adjust call to
s390_effective_inner_type.
(s390_function_arg_vector): New function.
(s390_function_arg_integer): Adjust comment.
(struct s390_arg_state)<vr>: New field.
(s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
arguments according to vector ABI when appropriate.
(s390_push_dummy_call): Initialize the argument state's field
'vr'. Adjust calls to s390_handle_arg.
(s390_register_return_value): Handle vector return values.
(s390_return_value): Apply the "register" return value convention
to a vector when appropriate.
(s390_gdbarch_init): Initialize tdep->vector_abi.
* NEWS: Announce S390 vector ABI support.
Extend the gdb 'dump' command to allow creating output in verilog hex
format. Add some tests to cover new functionality. As bfd does not
currently support reading in verilog hex formats the tests only cover
the 'dump' command, not the 'restore' command.
gdb/ChangeLog:
* cli/cli-dump.c (verilog_cmdlist): New variable.
(dump_verilog_memory): New function.
(dump_verilog_value): New function.
(verilog_dump_command): New function.
(_initialize_cli_dump): Add new commands to support verilog dump
format.
* NEWS: Add entry for "dump verilog".
gdb/doc/ChangeLog:
* gdb.texinfo (Dump/Restore Files): Add detail about verilog dump
format.
gdb/testsuite/ChangeLog:
* gdb.base/dump.exp: Add *.verilog files to all_files list. Add
new tests for verilog output.
This commit modifies remote_add_inferior to take an extra argument
try_open_exec. If this is nonzero, remote_add_inferior will attempt
to open this inferior's executable as the main executable if no main
executable is open already. Callers are updated appropriately.
With this commit, remote debugging can now be initiated using only a
"target remote" or "target extended-remote" command; no "set sysroot"
or "file" commands are required, e.g.
bash$ gdb -q
(gdb) target remote | gdbserver - /bin/sh
Remote debugging using | gdbserver - /bin/sh
Process /bin/sh created; pid = 32166
stdin/stdout redirected
Remote debugging using stdio
Reading symbols from target:/bin/bash...
One testcase required updating as a result of this commit. The test
checked that GDB's "info files" command does not crash if no main
executable is open, and relied on GDB's inability to access the main
executable over the remote protocol. The test was updated to inhibit
this new behavior.
gdb/ChangeLog:
* remote.c (remote_add_inferior): New argument try_open_exec.
If nonzero, attempt to open the inferior's executable file as
the main executable if no main executable is open already.
All callers updated.
* NEWS: Mention that GDB now supports automatic location and
retrieval of executable + files from remote targets.
gdb/doc/ChangeLog:
* gdb.texinfo (Connecting to a Remote Target): Mention that
GDB can access program files from remote targets that support
qXfer:exec-file:read and Host I/O packets.
gdb/testsuite/ChangeLog:
* gdb.server/server-exec-info.exp: Inhibit GDB from accessing
the main executable over the remote protocol.
This commit adds a new packet "qXfer:exec-file:read" to the remote
protocol that can be used to obtain the pathname of the file that
was executed to create a process on the remote system. Support for
this packet is added to GDB and remote_ops.to_pid_to_exec_file is
implemented using it.
gdb/ChangeLog:
* target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
* remote.c (PACKET_qXfer_exec_file): Likewise.
(remote_protocol_features): Register the
"qXfer:exec-file:read" feature.
(remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
(remote_pid_to_exec_file): New function.
(init_remote_ops): Initialize to_pid_to_exec_file.
(_initialize_remote): Register new "set/show remote
pid-to-exec-file-packet" command.
* NEWS: Announce new qXfer:exec-file:read packet.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Document the "set/show
remote pid-to-exec-file-packet" command.
(General Query Packets): Document the qXfer:exec-file:read
qSupported features. Document the qXfer:exec-file:read packet.
This commit updates exec_file_locate_attach to use exec_file_find
to compute the full pathname of the main executable in some cases.
The net effect of this is that the main executable's path will be
prefixed with gdb_sysroot in the same way that shared library paths
currently are.
gdb/ChangeLog:
* exec.c (solist.h): New include.
(exec_file_locate_attach): Prefix absolute executable
paths with gdb_sysroot if set.
* NEWS: Mention that executable paths may be prepended
with sysroot.
gdb/doc/ChangeLog:
* gdb.texinfo (set sysroot): Document that "set sysroot" also
applies to executable paths if supplied to GDB as absolute.
Pedro Alves:
The commands that enables aren't even documented in the manual.
Judging from that, I assume that only wdb users would ever really
be using the --xdb switch.
I think it's time to drop "support" for the --xdb switch too. I
looked through the commands that that exposes, the only that looked
potentially interesting was "go", but then it's just an alias
for "tbreak+jump", which can easily be done with "define go...end".
I'd rather free up the "go" name for something potentially
more interesting (either run control, or maybe even unrelated,
e.g., for golang).
gdb/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add removed -xdb.
* breakpoint.c (command_line_is_silent): Remove xdb_commands
conditional.
(_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
and lb.
* cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
va.
* cli/cli-decode.c (find_command_name_length): Remove xdb_commands
conditional.
* defs.h (xdb_commands): Remove declaration.
* f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
* guile/scm-cmd.c (command_classes): Remove xdb from comment.
* infcmd.c (run_no_args_command, go_command): Remove.
(_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
* infrun.c (xdb_handle_command): Remove.
(_initialize_infrun): Remove xdb_commands for lz and z.
* main.c (xdb_commands): Remove variable.
(captured_main): Remove "xdb" from long_options.
(print_gdb_help): Remove --xdb from help.
* python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
* source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
* stack.c (backtrace_full_command, args_plus_locals_info)
(current_frame_command): Remove.
(_initialize_stack): Remove xdb_commands for t, T and l.
* symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
* thread.c (_initialize_thread): Remove xdb_commands condition.
* tui/tui-layout.c (tui_toggle_layout_command)
(tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
(_initialize_tui_layout): Remove xdb_commands for td and ts.
* tui/tui-regs.c (tui_scroll_regs_forward_command)
(tui_scroll_regs_backward_command): Remove.
(_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
* tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
(_initialize_tui_win): Remove xdb_commands for U and w.
* utils.c (pagination_on_command, pagination_off_command): Remove.
(initialize_utils): Remove xdb_commands for am and sm.
gdb/doc/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Mode Options): Remove -xdb.
This patch, as the subject says, extends GDB so that it is able to use
the contents of the file /proc/PID/coredump_filter when generating a
corefile. This file contains a bit mask that is a representation of
the different types of memory mappings in the Linux kernel; the user
can choose to dump or not dump a certain type of memory mapping by
enabling/disabling the respective bit in the bit mask. Currently,
here is what is supported:
bit 0 Dump anonymous private mappings.
bit 1 Dump anonymous shared mappings.
bit 2 Dump file-backed private mappings.
bit 3 Dump file-backed shared mappings.
bit 4 (since Linux 2.6.24)
Dump ELF headers.
bit 5 (since Linux 2.6.28)
Dump private huge pages.
bit 6 (since Linux 2.6.28)
Dump shared huge pages.
(This table has been taken from core(5), but you can also read about it
on Documentation/filesystems/proc.txt inside the Linux kernel source
tree).
The default value for this file, used by the Linux kernel, is 0x33,
which means that bits 0, 1, 4 and 5 are enabled. This is also the
default for GDB implemented in this patch, FWIW.
Well, reading the file is obviously trivial. The hard part, mind you,
is how to determine the types of the memory mappings. For that, I
extended the code of gdb/linux-tdep.c:linux_find_memory_regions_full and
made it rely *much more* on the information gathered from
/proc/<PID>/smaps. This file contains a "verbose dump" of the
inferior's memory mappings, and we were not using as much information as
we could from it. If you want to read more about this file, take a look
at the proc(5) manpage (I will also write a blog post soon about
everything I had to learn to get this patch done, and when I it is ready
I will post it here).
With Oleg Nesterov's help, we could improve the current algorithm for
determining whether a memory mapping is anonymous/file-backed,
private/shared. GDB now also respects the MADV_DONTDUMP flag and does
not dump the memory mapping marked as so, and will always dump
"[vsyscall]" or "[vdso]" mappings (just like the Linux kernel).
In a nutshell, what the new code is doing is:
- If the mapping is associated to a file whose name ends with
" (deleted)", or if the file is "/dev/zero", or if it is "/SYSV%08x"
(shared memory), or if there is no file associated with it, or if
the AnonHugePages: or the Anonymous: fields in the /proc/PID/smaps
have contents, then GDB considers this mapping to be anonymous.
There is a special case in this, though: if the memory mapping is a
file-backed one, but *also* contains "Anonymous:" or
"AnonHugePages:" pages, then GDB considers this mapping to be *both*
anonymous and file-backed, just like the Linux kernel does. What
that means is simple: this mapping will be dumped if the user
requested anonymous mappings *or* if the user requested file-backed
mappings to be present in the corefile.
It is worth mentioning that, from all those checks described above,
the most fragile is the one to see if the file name ends with
" (deleted)". This does not necessarily mean that the mapping is
anonymous, because the deleted file associated with the mapping may
have been a hard link to another file, for example. The Linux
kernel checks to see if "i_nlink == 0", but GDB cannot easily do
this check (as it has been discussed, GDB would need to run as root,
and would need to check the contents of the /proc/PID/map_files/
directory in order to determine whether the deleted was a hardlink
or not). Therefore, we made a compromise here, and we assume that
if the file name ends with " (deleted)", then the mapping is indeed
anonymous. FWIW, this is something the Linux kernel could do
better: expose this information in a more direct way.
- If we see the flag "sh" in the VmFlags: field (in /proc/PID/smaps),
then certainly the memory mapping is shared (VM_SHARED). If we have
access to the VmFlags, and we don't see the "sh" there, then
certainly the mapping is private. However, older Linux kernels (see
the code for more details) do not have the VmFlags field; in that
case, we use another heuristic: if we see 'p' in the permission
flags, then we assume that the mapping is private, even though the
presence of the 's' flag there would mean VM_MAYSHARE, which means
the mapping could still be private. This should work OK enough,
however.
Finally, it is worth mentioning that I added a new command, 'set
use-coredump-filter on/off'. When it is 'on', it will read the
coredump_filter' file (if it exists) and use its value; otherwise, it
will use the default value mentioned above (0x33) to decide which memory
mappings to dump.
gdb/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Oleg Nesterov <oleg@redhat.com>
PR corefiles/16092
* linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
New enum identifying the various options of the coredump_filter
file.
(struct smaps_vmflags): New struct.
(use_coredump_filter): New variable.
(decode_vmflags): New function.
(mapping_is_anonymous_p): Likewise.
(dump_mapping_p): Likewise.
(linux_find_memory_regions_full): New variables
'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
parsing of its information. Implement memory mapping filtering
based on its contents.
(show_use_coredump_filter): New function.
(_initialize_linux_tdep): New command 'set use-coredump-filter'.
* NEWS: Mention the possibility of using the
'/proc/PID/coredump_filter' file when generating a corefile.
Mention new command 'set use-coredump-filter'.
gdb/doc/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/16092
* gdb.texinfo (gcore): Mention new command 'set
use-coredump-filter'.
(set use-coredump-filter): Document new command.
gdb/testsuite/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/16092
* gdb.base/coredump-filter.c: New file.
* gdb.base/coredump-filter.exp: Likewise.
This patch adds cpu information on linux based on /proc/cpuinfo as :
cpus Listing of all cpus/cores on the system
This patch also reorders the info os commands so that they are listed
in alphabetical order.
gdb/ChangeLog:
* NEWS: Mention info os cpus support.
* gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
(struct osdata_type): Add cpus entry, reorder the entries in
alphabetical order.
gdb/doc/ChangeLog:
* gdb.texinfo (Operating System Auxiliary Information): Add info os cpus
documentation, reorder the info os entries in alphabetical order.
The "set serial parity" command allows the user to control which
parity to use when communicating over a serial connection, rather
than having the parity hardcoded to none.
gdb/ChangeLog:
* NEWS: Mention set/show serial parity command.
* monitor.c (monitor_open): Call serial_setparity.
* remote.c (remote_open_1): Likewise.
* ser-base.c (ser_base_serparity): New function.
* ser-base.h (ser_base_setparity): Add declaration.
* ser-go32.c (dos_ops): Set "setparity" field.
* ser-mingw.c (ser_windows_raw): Do not set state.fParity and
state.Parity.
(ser_windows_setparity): New function.
(hardwire_ops): Add ser_windows_setparity.
(tty_ops): Add NULL for setparity field.
(pipe_ops): Add ser_base_setparity.
(tcp_ops): Likewise.
* ser-pipe.c (pipe_ops): Likewise.
* ser-tcp.c (tcp_ops): Likewise.
* ser-unix.c (hardwire_setparity): Add declaration.
(hardwire_raw): Don't reset PARENB flag.
(hardwire_setparity): New function.
(hardwire_ops): Add hardwire_setparity.
* serial.c (serial_setparity): New function.
(serial_parity): New global.
(parity_none, parity_odd, parity_even, parity_enums, parity):
New static globals.
(set_parity): New function.
(_initialize_serial): Add set/show serial parity commands.
* serial.h (GDBPARITY_NONE): Define.
(GDBPARITY_ODD): Define.
(GDBPARITY_EVEN): Define.
(serial_setparity) Add declaration.
(struct serial_ops): Add setparity field.
* target.h (serial_parity): Add declaration.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote configuration): Document "set/show
serial parity" command.
gdb/ChangeLog
2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* NEWS: New Removed targets and native configurations.
This commit adds a new packet "vFile:fstat:" to the remote protocol
that can be used by to retrieve information about files that have
been previously opened using vFile:open. vFile:fstat: support is
added to GDB, and remote_bfd_iovec_stat is implemented using it. If
vFile:fstat: is not supported by the remote GDB creates a dummy result
by zeroing the supplied stat structure and setting its st_size field
to INT_MAX. This mimics GDB's previous behaviour, with the exception
that GDB did not previously zero the structure so all other fields
would have been returned unchanged, which is to say very likely
populated with random values from the stack.
gdb/ChangeLog:
* remote-fileio.h (remote_fileio_to_host_stat): New declaration.
* remote-fileio.c (remote_fileio_to_host_uint): New function.
(remote_fileio_to_host_ulong): Likewise.
(remote_fileio_to_host_mode): Likewise.
(remote_fileio_to_host_time): Likewise.
(remote_fileio_to_host_stat): Likewise.
* remote.c (PACKET_vFile_fstat): New enum value.
(remote_protocol_features): Register the "vFile:fstat" feature.
(remote_hostio_fstat): New function.
(remote_bfd_iovec_stat): Use the above.
(_initialize_remote): Register new "set/show remote
hostio-fstat-packet" command.
* symfile.c (separate_debug_file_exists): Update comment.
* NEWS: Announce new vFile:fstat packet.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Document the
"set/show remote hostio-fstat-packet" command.
(General Query Packets): Document the vFile:fstat
qSupported features.
(Host I/O Packets): Document the vFile:fstat packet.
This adjusts target remote to tell the core whether a trap was caused
by a breakpoint.
To that end, the patch teaches GDB about new RSP stop reasons "T05
swbreak" and "T05 hwbreak", that remote targets report back to GDB,
similarly to how "T05 watch" indicates a stop caused by a watchpoint.
Because targets that can report these events are expected to
themselves adjust the PC after a software breakpoint, these new stop
reasons must only be reported if the stub is talking to a GDB that
understands them. Because of that, the use of the new stop reasons
needs to be handshaked on initial connection, using the qSupported
mechanism. GDB simply sends "swbreak+" in its qSupports query, and
the stub reports back "swbreak+" too.
Because these new stop reasons are required to fix a fundamental
non-stop mode problem, this commit extends the remote non-stop intro
section in the manual, documenting the events as required.
To be clear, GDB will still cope with remote targets that don't
support these new stop reasons; it will behave just like today.
Tested on x86-64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
* remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
Delete field.
<stop_reason>: New field.
(PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
(packet_set_cmd_state): New function.
(remote_protocol_features): Register the "swbreak" and "hwbreak"
features.
(remote_query_supported): If not disabled with the corresponding
"set remote foo-packet" command, report support for the swbreak
and hwbreak features.
(struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
field.
<stop_reason>: New field.
(remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
(remote_wait_as): Adjust.
(remote_stopped_by_sw_breakpoint)
(remote_supports_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint)
(remote_supports_stopped_by_hw_breakpoint): New functions.
(remote_stopped_by_watchpoint): New function.
(init_remote_ops): Install them.
(_initialize_remote): Register new "set/show remote
swbreak-feature-packet" and "set/show remote
swbreak-feature-packet" commands.
gdb/doc/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): Document the "set/show
remote swbreak-feature-packet" and "set/show remote
hwbreak-feature-packet" commands.
(Packets) <Z0>: Add cross link to the "swbreak" stop reason's
decription.
(Stop Reply Packets): Document the swbreak and hwbreak stop
reasons.
(General Query Packets): Document the swbreak and hwbreak
qSupported features.
(Remote Non-Stop): Explain that swbreak and hwbreak are required.
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
This patch simply adds a small entry to `Changes since GDB 7.8' announcing the
support for dtrace probes.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* NEWS: Announce the support for DTrace SDT probes.
Allow the size of the branch trace ring buffer to be defined by the
user. The specified buffer size will be used when BTS tracing is
enabled for new threads.
The obtained buffer size may differ from the requested size. The
actual buffer size for the current thread is shown in the "info record"
command.
Bigger buffers mean longer traces, but also longer processing time.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (parse_xml_btrace_conf_bts): Add size.
(btrace_conf_bts_attributes): New.
(btrace_conf_children): Add attributes.
* common/btrace-common.h (btrace_config_bts): New.
(btrace_config)<bts>: New.
(btrace_config): Update comment.
* nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
Use config.
* features/btrace-conf.dtd: Increment version. Add size
attribute to bts element.
* record-btrace.c (set_record_btrace_bts_cmdlist,
show_record_btrace_bts_cmdlist): New.
(record_btrace_adjust_size, record_btrace_print_bts_conf,
record_btrace_print_conf, cmd_set_record_btrace_bts,
cmd_show_record_btrace_bts): New.
(record_btrace_info): Call record_btrace_print_conf.
(_initialize_record_btrace): Add commands.
* remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
(remote_protocol_features): Add Qbtrace-conf:bts:size packet.
(btrace_sync_conf): Synchronize bts size.
(_initialize_remote): Add Qbtrace-conf:bts:size packet.
* NEWS: Announce new commands and new packets.
doc/
* gdb.texinfo (Branch Trace Configuration Format): Add size.
(Process Record and Replay): Describe new set|show commands.
(General Query Packets): Describe Qbtrace-conf:bts:size packet.
testsuite/
* gdb.btrace/buffer-size: New.
gdbserver/
* linux-low.c (linux_low_btrace_conf): Print size.
* server.c (handle_btrace_conf_general_set): New.
(hanle_general_set): Call handle_btrace_conf_general_set.
(handle_query): Report Qbtrace-conf:bts:size as supported.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
gdb/ChangeLog:
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
gdb/ChangeLog:
* NEWS: Mention gdb.Objfile.username.
* python/py-objfile.c (objfpy_get_username): New function.
(objfile_getset): Add "username".
gdb/doc/ChangeLog:
* python.texi (Objfiles In Python): Document Objfile.username.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Add tests for objfile.username.
Add test for objfile.filename, objfile.username after objfile
has been unloaded.
downstream Fedora request:
Please make it easier to find the backtrace of the crashing thread
https://bugzilla.redhat.com/show_bug.cgi?id=1024504
Currently after loading a core file GDB prints:
Core was generated by `./threadcrash1'.
Program terminated with signal SIGSEGV, Segmentation fault.
8 *(volatile int *)0=0;
(gdb) _
there is nowhere seen which of the threads had crashed. In reality GDB always
numbers that thread as #1 and it is the current thread that time. But after
dumping all the info into a file for later analysis it is no longer obvious.
'thread apply all bt' even puts the thread #1 to the _end_ of the output!!!
I find maybe as good enough and with no risk of UI change flamewar to just
sort the threads by their number. Currently they are printed as they happen
in the internal GDB list which has no advantage. Printing thread #1 as the
first one with assumed 'thread apply all bt' (after the core file is loaded)
should make the complaint resolved I guess.
On Thu, 15 Jan 2015 20:29:07 +0100, Doug Evans wrote:
No objection to sorting the list, but if thread #1 is the important one,
then a concern could be it'll have scrolled off the screen (such a
concern has been voiced in another thread in another context),
and if not lost (say it's in an emacs buffer) one would still have
to scroll back to see it.
So one *could* still want #1 to be last.
Do we want an option to choose the sort direction?
gdb/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add 'thread apply all' option
'-ascending'.
* thread.c (tp_array_compar_ascending, tp_array_compar): New.
(thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
Sort tp_array using tp_array_compar.
(_initialize_thread): Extend thread_apply_all_command help.
gdb/doc/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Threads): Describe -ascending for thread apply all.
clear_symtab_users calls breakpoint_re_set before
observer_notify_new_objfile(NULL), and thus symbol lookup
done during breakpoint_re_set will see a stale cache.
Presumably we just need to move the call to observer_notify_new_objfile(NULL)
to before breakpoint_re_set, but need to check for other such issues,
and 7.9 is scheduled to branch tomorrow.
Reverts commits:
b2fb95e006400678a494d98b9ccbcc77087adf50
gdb/ChangeLog:
* symtab.c (eq_symbol_entry): Use SYMBOL_SEARCH_NAME and
symbol_matches_domain for symbol comparisons.
* symtab.c (symbol_cache_mark_found): Improve function comment.
Rename parameter objfile to objfile_context.
(symbol_cache_mark_not_found): Improve function comment.
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
gdb/ChangeLog:
PR gdb/15830
* NEWS: The "maint demangle" command is renamed as "demangle".
* demangle.c: #include cli/cli-utils.h, language.h.
(demangle_command): New function.
(_initialize_demangle): Add new command "demangle".
* maint.c (maintenance_demangle): Stub out.
(_initialize_maint_cmds): Update help text for "maint demangle",
and mark as deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging C Plus Plus): Mention "demangle".
(Symbols): Ditto.
(Maintenance Commands): Delete docs for "maint demangle".
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Remove references to "maint demangle".
* gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
Add tests for explicitly specifying language to demangle.
* gdb.dlang/demangle.exp: Ditto.
gdb/ChangeLog:
Add symbol lookup cache.
* NEWS: Document new options and commands.
* symtab.c (symbol_cache_key): New static global.
(DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
(SYMBOL_LOOKUP_FAILED): New macro.
(symbol_cache_slot_state): New enum.
(block_symbol_cache): New struct.
(symbol_cache): New struct.
(new_symbol_cache_size, symbol_cache_size): New static globals.
(hash_symbol_entry, eq_symbol_entry): New functions.
(symbol_cache_byte_size, resize_symbol_cache): New functions.
(make_symbol_cache, free_symbol_cache): New functions.
(get_symbol_cache, symbol_cache_cleanup): New function.
(set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
(symbol_cache_lookup, symbol_cache_clear_slot): New function.
(symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
(symbol_cache_flush, symbol_cache_dump): New functions.
(maintenance_print_symbol_cache): New function.
(maintenance_flush_symbol_cache): New function.
(symbol_cache_stats): New function.
(maintenance_print_symbol_cache_statistics): New function.
(symtab_new_objfile_observer): New function.
(symtab_free_objfile_observer): New function.
(lookup_static_symbol, lookup_global_symbol): Use symbol cache.
(_initialize_symtab): Init symbol_cache_key. New parameter
maint symbol-cache-size. New maint commands print symbol-cache,
print symbol-cache-statistics, flush-symbol-cache.
Install new_objfile, free_objfile observers.
doc/ChangeLog:
* gdb.texinfo (Symbols): Document new commands
"maint print symbol-cache", "maint print symbol-cache-statistics",
"maint flush-symbol-cache". Document new option
"maint set symbol-cache-size".
This patch removes documentation from some commands whose support has
been recently removed.
gdb/ChangeLog:
* NEWS: Document removal of "dll-symbols", "add-shared-symbol-files"
and "assf" commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Files): Remove documentation of the
"add-shared-symbol-files" and "assf" commands.
(Cygwin Native): Remove documentation of the "dll-symbols"
command.
This patch is to add SDE OS ABI support in GDB, which has been used in
codesourcery gdb tree for some years.
gdb:
2014-12-19 Maciej W. Rozycki <macro@codesourcery.com>
Nigel Stephens <nigel@mips.com>
Chris Dearman <chris@mips.com>
Luis Machado <lgustavo@codesourcery.com>
* Makefile.in (ALL_TARGET_OBS): Add mips-sde-tdep.o.
(ALLDEPFILES): Add mips-sde-tdep.c.
* mips-sde-tdep.c: New file containg SDE specific code.
* configure.tgt (mips*-sde*-elf*): Add mips-sde-dep.o to
gdb_target_obs.
* defs.h (gdb_osabi): Add GDB_OSABI_SDE.
* osabi.c (gdb_osabi_names): Add SDE.
* NEWS: Mention the change.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
This adds a command for listing the "user" registers. So far GDB
offered no means of determining the set of user registers and omitted
them from all other register listings.
gdb/ChangeLog:
* user-regs.c: Include "arch-utils.h", "command.h", and
"cli/cli-cmds.h".
(maintenance_print_user_registers): New.
(_initialize_user_regs): Register new "maint print user-registers"
subcommand.
* NEWS: Mention new GDB command "maint print user-registers".
gdb/doc/ChangeLog:
* gdb.texinfo: Document "maint print user-registers".
There is already "add-auto-load-safe-path" which works
like "set auto-load safe-path" but in append mode.
There was missing an append equivalent for "set auto-load scripts-directory".
ABRT has directory /var/cache/abrt-di/ as an alternative one
to /usr/lib/debug/ . Therefore ABRT needs to use -iex parameters to add this
/var/cache/abrt-di/ directory as a first-class debuginfo directory.
Using absolute "set auto-load scripts-directory" would hard-code the path
possibly overriding local system directory additions; besides it would not be
nice anyway.
gdb/ChangeLog
2014-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Add add-auto-load-scripts-directory.
* NEWS (Changes since GDB 7.8): Add add-auto-load-scripts-directory.
* auto-load.c (add_auto_load_dir): New function.
(_initialize_auto_load): Install it.
gdb/doc/ChangeLog
2014-11-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Add add-auto-load-scripts-directory.
* gdb.texinfo (Auto-loading): Add add-auto-load-scripts-directory link.
(objfile-gdbdotext file): Add add-auto-load-scripts-directory.
gdb/ChangeLog:
* NEWS: Mention ability add attributes to gdb.Objfile and
gdb.Progspace objects.
* python/py-objfile.c (objfile_object): New member dict.
(objfpy_dealloc): Py_XDECREF dict.
(objfpy_initialize): Initialize dict.
(objfile_getset): Add __dict__.
(objfile_object_type): Set tp_dictoffset member.
* python/py-progspace.c (progspace_object): New member dict.
(pspy_dealloc): Py_XDECREF dict.
(pspy_initialize): Initialize dict.
(pspace_getset): Add __dict__.
(pspace_object_type): Set tp_dictoffset member.
gdb/doc/ChangeLog:
* python.texi (Progspaces In Python): Document ability to add
random attributes to gdb.Progspace objects.
(Objfiles In Python): Document ability to add random attributes to
gdb.objfile objects.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Add tests for setting random attributes
in objfiles.
* gdb.python/py-progspace.exp: Add tests for setting random attributes
in progspaces.
If one is watching new_objfile events in python, it helps to know
when the list of objfiles is cleared. This patch adds a new
clear_objfiles event to support this.
This patch is all just cut-n-paste-n-tweak derived from
the new_objfiles event.
gdb/ChangeLog:
* NEWS: Mention new event gdb.clear_objfiles.
* python/py-event.h (emit_clear_objfiles_event): Clear
* python/py-events.h (events_object): New member clear_objfiles.
* python/py-evts.c (gdbpy_initialize_py_events): Add clear_objfiles
event.
* python/py-inferior.c (python_new_objfile): If objfile is NULL,
emit clear_objfiles event.
* python/py-newobjfileevent.c (create_clear_objfiles_event_object): New
function.
(emit_clear_objfiles_event): New function.
(clear_objfiles): New event.
* python/python-internal.h (gdbpy_initialize_clear_objfiles_event):
Declare.
* python/python.c (_initialize_python): Call
gdbpy_initialize_clear_objfiles_event.
gdb/doc/ChangeLog:
* python.texi (Events In Python): Document clear_objfiles event.
gdb/testsuite/ChangeLog:
* gdb.python/py-events.exp: Update expected output for clear_objfiles
event.
* gdb.python/py-events.py: Add clear_objfiles event.
gdb/ChangeLog:
* NEWS: Mention new gdb.Objfile.progspace attribute.
* python/py-objfile.c (objfpy_get_progspace): New function.
(objfile_getset): New entry for "progspace".
gdb/doc/ChangeLog:
* python.texi (Objfiles In Python): Document new progspace attribute.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Test progspace attribute.
