Commit graph

10198 commits

Author SHA1 Message Date
Steve Chamberlain
2e166b5f57 Die. 1994-05-07 23:48:50 +00:00
Steve Chamberlain
632ee4a17f * configure.in (target==go32): Don't build gdb.
* dosrel: New directory.
1994-05-07 23:48:27 +00:00
Stan Shebs
b2c6165444 Restore changelog entries clobbered by last checkin. 1994-05-07 20:11:44 +00:00
Ian Lance Taylor
af9fa3c1d9 Restore changes clobbered by last check in. 1994-05-07 05:01:09 +00:00
Ian Lance Taylor
461004f30f It's mh-lynxrs6k, not mh-lynxosrs6k. 1994-05-07 04:58:52 +00:00
Ian Lance Taylor
182c035ac4 No, this file really should have been removed, not recreated. 1994-05-07 04:57:38 +00:00
David Henkel-Wallace
2a38983c8d various changes for lynx.rs, ericsson, BNR. 1994-05-07 00:34:19 +00:00
Steve Chamberlain
eebd76cbbb * configure.in (host==go32): Configure dosrel too.
* Makefile.in (INTALL_TARGET): Call INSTALL_LAST last.
	(HOST_CC, HOST_PREFIX, HOST_PREFIX_1): Undefine, they should
	be set by incoming names or templates.
	(INSTALL_LAST): New rule.
	* config/mh-go32: New fragment.
1994-05-06 21:25:45 +00:00
Steve Chamberlain
c794f0aa85 * config/go32.mh: New makefile fragment for go32 crossing.
* configure.in (host==go32): Use new fragment.
1994-05-06 21:14:49 +00:00
Steve Chamberlain
82da62d141 * config/mh-go32: New fragment.
* configure.in (host==go32): Use go32 fragment.
1994-05-06 20:40:19 +00:00
Stan Shebs
2c30f25811 Fri May 6 13:30:22 1994 Stan Shebs (shebs@andros.cygnus.com)
* Makefile.in (kdb): Remove old init.c creation commands.
	* configure.in (sparclite): Match on sparclite*.
	* sparclite/aload.c (main): Only change section addresses for
	a.out format object files.
1994-05-06 20:39:25 +00:00
Steve Chamberlain
5ff7b32867 * config/i386/go32.mh: Define CC. 1994-05-06 20:28:55 +00:00
Stan Shebs
b292fca800 Fri May 6 11:56:54 1994 Stan Shebs (shebs@andros.cygnus.com)
* gdbserver/Makefile.in: Remove irrelevant definitions and
	comments inherited from the gdb Makefile.
	(BFD_DIR, BFD, BFD_SRC, BFD_CFLAGS): Add from gdb Makefile.
	(VERSION): Update to 4.12.3.
	(gdbserver): Remove any existing executable first.
	(distclean, realclean): Remove nm.h.
	* gdbserver/low-lynx.c: Add Sparc Lynx support.
	* gdbserver/low-sparc.c, gdbserver/low-sun3.c (sys/wait.h):
	Don't use absolute pathname.
1994-05-06 19:52:23 +00:00
Steve Chamberlain
6149af094e support for Xgo32X. 1994-05-06 19:27:57 +00:00
Steve Chamberlain
90f2ba0625 * config/go32.mh : New file for Xgo32X. 1994-05-06 19:25:31 +00:00
Ian Lance Taylor
5acce559f4 * ldfile.c (ldfile_open_command_file): Set bfd_error_system_call
before calling einfo, since we are reporting an fopen failure.
	From jrs@world.std.com (Rick Sladkey).
1994-05-06 19:21:00 +00:00
Ian Lance Taylor
f6671f28a4 * configure.in: Use "e" rather than "em_" as prefix for
emulations.
1994-05-06 19:16:30 +00:00
Steve Chamberlain
d66da74230 * config/go32.mh: XX support.
From bill
	* Makefile.in: Build sysdep.h without causing worrying but
	harmless error message.
1994-05-06 18:53:44 +00:00
Ian Lance Taylor
2db90a6320 * gasp.c: Include libiberty.h.
(main): Remove unused variable i.
1994-05-06 18:39:04 +00:00
Ian Lance Taylor
973bfc476b * nlmcode.h (nlm_swap_auxiliary_headers_in): Rework custom header
handling for latest suggested format.
	(nlm_swap_auxiliary_headers_out): Likewise.
	(nlm_compute_section_file_positions): Likewise.
1994-05-06 17:37:39 +00:00
Ken Raeburn
6e1e82a0be em_->e, mips-idtl->mipsl-idt name changes 1994-05-06 06:55:54 +00:00
Ken Raeburn
38cae0cd30 * emultempl/generic.em: Use "e" rather than "em_" as prefix for filename.
* emultempl/gld960.em, emultempl/gld960c.em, emultempl/lnk960.em,
emultempl/hppaelf.em, emultempl/m88kbcs.em, emultempl/vanilla.em: Ditto.
* Makefile.in: Changed all generated file names.
(ldemul-list.h): Depend on Makefile, not config.status.  Changed sed patterns
to handle new filenames.
1994-05-06 06:55:35 +00:00
Ken Raeburn
97dc4cf850 * config/mipsl-idt.mt: Renamed from mips-idtl.mt.
* configure.in: Adjusted.
1994-05-06 06:54:15 +00:00
Stan Shebs
87d62f677b Thu May 5 20:23:36 1994 Stan Shebs (shebs@andros.cygnus.com)
* stabs.texinfo (Stab Section Basics): Add comment about alignment
	of stabs-in-coff sections.
1994-05-06 03:31:15 +00:00
Ken Raeburn
db4a85f981 * emulparams/gld960coff.sh: New file.
Patches from Ralph Campbell:
* emulparams/mipsbsd.sh (OUTPUT_FORMAT): Fix name to have `a.out'
instead of `aout'.
1994-05-06 00:40:18 +00:00
Ken Raeburn
7182a4df5d * config/cf-h8300h.mt: Renamed from coff-h8300h.mt, to make it unique in 8.3.
* config/i960coff.mt: New file.

Patches from Ralph Campbell:
* config/mipsbsd.mh: New file.
1994-05-06 00:39:32 +00:00
Ken Raeburn
2de0acc18a * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it unique in 8.3
naming schemes.
* configure.in (appdirs): New variable.  Currently empty, but will be used in
gas distribution.  If nonempty, lists a set of directories at least one of
which must get configured, or top level configuration is considered to have
failed.
(rs6000-*-lynxos*): Use new file name.
1994-05-06 00:12:22 +00:00
Ken Raeburn
c9fda94866 * config/mh-lynxrs6k: Renamed from mh-lynxosrs6k, to make it unique in 8.3
naming schemes.
1994-05-06 00:11:03 +00:00
Ken Raeburn
23a832d2b9 Note deleted files. 1994-05-06 00:03:20 +00:00
Ken Raeburn
fbefddfb9c * symbols.c (symbol_new) [BFD_ASSEMBLER]: Don't permit additions to the symbol
table if it's already been set in the output bfd.
(symbol_begin) [! EMIT_SECTION_SYMBOLS] [RELOC_REQUIRES_SYMBOL]: Don't use
bfd_abs_section.symbol for gas absolute symbol.
1994-05-06 00:03:11 +00:00
Ken Raeburn
5923201105 doc/Makefile.in (distclean, clean-dvi, clean-info): Delete gasp files too. 1994-05-06 00:00:41 +00:00
Ken Raeburn
dc2b222a18 gprof.h, Makefile.in changes 1994-05-05 23:25:12 +00:00
Ken Raeburn
d20d64bb53 (TRUE, FALSE): Always use undef before defining them. 1994-05-05 23:24:57 +00:00
Ken Raeburn
8afeb6eef0 (install-info): Check for gprof.info in build dir, fall back to srcdir. Depend
on it.
1994-05-05 23:24:33 +00:00
Ken Raeburn
5e54009453 syslex.l, objdump.c/config changes 1994-05-05 22:53:04 +00:00
Ken Raeburn
c063fc4558 * Makefile.in (objdump.o): Deleted special rule.
* configure.in: Don't bother building ARCHDEFS variable for Makefile.
* objdump.c (ARCH_*): Deleted handling.
(disassemble_data): Call `disassembler' from opcodes library.
1994-05-05 22:52:31 +00:00
Ken Raeburn
6bd7601ee1 (yywrap): Define as function if not defined as a macro. 1994-05-05 22:51:27 +00:00
Ian Lance Taylor
6d41de1976 * config/tc-mips.c (mips_emit_delays): Make call to
mips_no_prev_insn unconditional.
1994-05-05 22:22:24 +00:00
Ken Raeburn
a139d99b3c * config/obj-coff*.*: Merged coffbfd versions into coff versions, with a single
"#ifdef BFD_ASSEMBLER" controlling most of it for now.  Deleted obj-coffbfd.*
files.
* configure.in: Always use obj-coff.* for COFF targets.
1994-05-05 21:38:25 +00:00
Ken Raeburn
8f10906f94 * config/default.exp: Renamed from unix-gas.exp. 1994-05-05 21:34:11 +00:00
Stan Shebs
523ca9d0a2 Thu May 5 12:00:22 1994 Stan Shebs (shebs@andros.cygnus.com)
* rs6000-nat.c (vmap_ldinfo): Don't fail if fstat returns an
	error.
1994-05-05 19:07:10 +00:00
Ken Raeburn
9ea9e1af48 * configure.in (mips*-dec-bsd*): New target; do build linker.
(mips*-*-bsd*): New target; don't build linker.
1994-05-05 05:27:24 +00:00
Jim Kingdon
ee5fca1f12 * infrun.c (proceed, normal_stop, wait_for_inferior), breakpoint.c
(print_it_normal): Add annotations for the inferior starting and
	stopping, and for all the various messages related to how it
	stopped.

	* printcmd.c (do_one_display): Annotate.
	* stack.c (print_frame_info): Annotate printing of stack frames.
1994-05-05 04:35:09 +00:00
Jim Kingdon
f710410bf9 * annotate.texi: Change edition to 0.5 and date to May 1994.
Add index.
	(Frames): New node, for frame annotation.
	(Displays): New node, for display annotation.
1994-05-05 04:25:03 +00:00
Stu Grossman
731dca9461 * remote.c (get_offsets): Handle case where stub doesn't support
qOffsets message.
1994-05-05 01:18:26 +00:00
Per Bothner
36a2283dad Add partial support for g++ code compiled with -fvtable-thunks.
* c-valprint.c (c_val_print):  Add vtblprint support
	when using thunks.
	* cp-valprint.c (cp_is_vtbl_member):  A vtable can be an array of
	pointers (if using thunks) as well as array of structs (otherwise).
	* cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name):  Move to global
	level, and make the latter non-static (so define_symbol can use it).
	* stabsread.c (define_symbol):  If the type being defined is a
	pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name.
	* symtab.h (VTBL_PREFIX_P):  Allow "_VT" as well as "_vt".
	* values.c (value_virtual_fn_field):  Handle thunks.
	* values.c (value_headof):  Minor efficiency hack.
	* values.c (value_headof):   Incomplete thunk support.  FIXME.
1994-05-05 00:19:33 +00:00
Stu Grossman
d32a92614d * chardefs.h, rldefs.h: Move decls of string funcs from chardefs.h
to rldefs.h so that they don't pollute apps that include
	readline.h.
	* history.c:  include rldefs.h to get decls of string funcs.
1994-05-04 21:42:06 +00:00
Ken Raeburn
608a26dbb2 * config/te-dpx2.h (TARGET_FORMAT, REGISTER_PREFIX_OPTIONAL): Define.
* configure.in (m68k-bull-sysv3*): Enable.
1994-05-04 20:24:51 +00:00
Ian Lance Taylor
0573a3b135 * config/m68k.mt (EMUL): Set to m68kaout.
* emulparams/m68kaout.sh: New file.
	* Makefile.in (ALL_EMULATIONS): Add em_m68kaout.o.
	(em_m68kaout.c): New target.
1994-05-04 20:22:15 +00:00
Ian Lance Taylor
2237e240e3 * config/tc-m68k.h (TARGET_FORMAT): If not TE_SUN3, define as
"a.out-zero.big".
1994-05-04 19:58:58 +00:00