(single_step, sparc_init_extra_frame_info, examine_prologue):
Use fetch_instruction instead of read_memory_integer
to ensure that instructions are always read as big-endian.
* gdbtk.c: Fixed a goof in the definition of the gdb_get_args &
gdb_get_locals Tcl commands. Moved the previous ChangeLog entry
from ChangeLog to ChangeLog-gdbtk...
* gdbtk.c: Add an object call wrapper for the new Tcl_Obj based
commands. This way the obj commands will also go through
catch_errors. This is just a bandaid while I rewrite the
string-based commands to use the object format.
%o0-%o5 as 64-bit values; compensate for stack bias.
(USE_STRUCT_CONVENTION): We only pass pointers to structs
if they're larger than 32 bytes.
(REG_STRUCT_HAS_ADDR): Ditto.
* sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
instead of read_register. If the target is a sparc64 and the frame
pointer is odd, compensate for the stack bias.
(get_saved_register): Use read_sp().
(DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
(sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
(sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
dummy frame.
(sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
the FP is odd, compensate for stack bias.
(sparc_store_return_value): Right-justify the return value before
writing it to %o0.
(sparc_fix_call_dummy): Don't NOP out part of the call dummy on
sparc64.
(sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
sparc64_write_fp, sp64_push_arguments,
sparc64_extract_return_value): New functions to support the
sparc64 ABI.
* dwarfread.c (handle_producer): Set processing_gcc_compilation to
the right version number.
* dwarf2read.c (read_file_scope): Assume we're processing
GCC2 output.
Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com>
* stabsread.c (read_one_struct_field): Do not override supplied
bitfield size for a range type value.
* gdbtypes.c (create_range_type): For a range with positive
lower limit, declare range type as unsigned.
all breakpoints are requested.
* stabsread.c (define_symbol): Record parameter types from Sunpro
function stabs in the TYPE_FIELDS of the function type.
* Makefile.in (config-check-targets, config-check-hosts): Removed.
1998-04-30 Paul Eggert <eggert@twinsun.com>
* Makefile.in (maintainer-clean):
Don't get ahead of yourself and delete Makefile
before running `make'.
(local-maintainer-clean, do-maintainer-clean): New rules.
* nec4102rom.c : New file implements rom monitor adapter for
nec-vr4102 board. This board hosts the vr4111 chip. This file
required extenstions to the monitor_ops structure, hooks for wiat
filter, new flags. This version does not support more than one
breakpoint and resuming after a breakpoint in 16 bit mode is
completely disfunctional. * monitor.h : Defined additional hooks
for dmpregs, confinuer_hooks and wait_filter. These additions
require that all rom monitor interfaces be recoded to to
initializa monitor ops using assignments rather than static
structure initialization. Added new bits to flags
MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES
* monitor.c (RDEBUG): Conditional tracing throughout the file.
(fromhex): Now recognized upper cse hex digits
(monitor_printf_noecho):
(monitor_readchar): Tracing interferes with input timing.
(monitor_open): Register different memory write functions with
dcache_init if MO_HAS_BLOCKWRITES.
(flush_monior_dcache): Added as an additional utilty.
(monitor-resume): Call continue hook if one has been supplied.
(monitor_wait_filter): New function Factored out of monitor wait
and used if alternate wait-filter has not been provided.
(monitor_wait): call alternate wait filter if provided. Call
monitor_dump_regs, a new function factored out from inline code.
(monitor_dump_block): A new function used as a utility when
monitors must dump several blocks of registers using different
commands.
(monitor_dump_regs): Call alternate function if provided. Uses new
hook in monitor.h.
(monitor_write_memory): Engage previouly added hook
MO_FILL_USES_ADDR.
(monitor_write_even_block): new function supports writing long
blocks of 4byte words.
(longlongendswap): new internal function
(monitor_write_memory_longlongs): new function writes large blocks
using command to enter a long long.
(monitor_write-memory_block): new Function figures out which block
mod to use.
(monitor_read_memory): Can now handle dump formats in which the bytes
preceeding the requested data is not printed.
* monitor.h: Added new fields to the structure
(INSTALLED_LIBS): Include GDBTKLIBS.
(CLIBS): Likewise.
* configure: Rebuilt.
* configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
(GDBTKLIBS): AC_SUBST.
make it work on the simulator.
(FIX_CALL_DUMMY): Convert to function call instead of inline code.
(sparc_fix_call_dummy): Declare.
* sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
old FIX_CALL_DUMMY macro, with additional fixes for simulator.
(sparc_push_dummy_frame): Set registers differently on simulator
to prevent corrupted register window save areas.
fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd
to check for reference to the same file.
* target.c (target_read_string): Handle string transfers at the
end of a memory section gracefully.
* gdb.c++/virtfunc.cc: Declare extern "C" printf to return int,
not void.
fche says he vaguely remembers a problem with returning int instead of
void, but ISO C sez printf returns int, so let's see what happens.
* configure.in (strerror): Check if function must be declared.
* acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
* gdb_string.h (strerror): Function declaration issued if
NEED_DECLARATION_STRERROR.
* configure, config.in : Files regenerated.
* gdbtk.c (_initialize_gdbtk): add cygwin32 specific code to
allow `gdb -nw' to work when specified specified from a windows
console-mode command line.
dump gracefully.
* solib.c (find_solib): Use catch_errors around call to
solib_map_sections. Use warning instead of error if reading of
the shared library name fails.
(solib_map_sections): Change return and argument types to make
it callable from catch_errors.
(symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL.
* irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
symbol_add_stub): Ditto.
* coffread.c (decode_base_type): Treat a long field with size greater
than TARGET_LONG_BIT as long long.
* values.c (value_from_longest): Print code value in error message.
* gdb/gdb_string.h (strdup): Declare only if not defined as a
macro.
Mark glibc development versions are defining strdup as a macro and the
prototype hosees it. Either way, this patch shouldn't cause problems.
* procfs.c: Added replacement macros for LWP stuff. Fixed support
for UnixWare / SVR4.2MP targets and any targets which use
multi-file /proc entries. Fixed support for hardware watchpoints.
* solib.c: SCO needs some of the same code as SunOS. Change
preprocessor conditionals.
* config/i386/i386sco5.mt: New file.
* config/i386/tm-i386sco5.h: New file.
* config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
* config/i386/nm-i386v42mp.h
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
Add other macros for hardware assisted watchpoints.
* config/i386/nm-i386sco5.h: Correct attributions.
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
* config/i386/nm-linux.h (target_remote_watchpoint): Pass
'type' through to i386_insert_watchpoint.
Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (wait_for_inferior): Don't add signalled processes
as new threads.
* procfs.c (wait_fd): Note if LWP has exited.
(procfs_wait): use GETPID to get process ID.
NOTE: I didn't commit Kean's changes to configure.host/configure.tgt
yet because they are kind of bogus and I'm punting back to him to let
him figure out what he's trying to do. So configuring for UnixWare
may not work just yet.
* gdb.base/branches.c: Code with lots of loops and
subroutines. Used to test gdbs ability to single step through PC
changes, especially to test mips-tdep.c:mips_next_pc
(sparc_extract_return_value): New function, required to handle
machines without floating point.
(sparc_store_return_value): Ditto.
* config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
sparc_extract_return_value instead of using inline code.
(sparc_extract_return_value): Declare.
(STORE_RETURN_VALUE): Call sparc_store_return_value instead
of using inline code.
(sparc_store_return_value): Declare.
work correctly on little-endian hosts.
(sparc_push_arguments): New function.
(gdb_print_insn_sparc): New function.
(_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
disassembler, so that SPARClite-specific instructions will
be recognized.
* sparcl-tdep.c (readchar): Print debugging information.
(debug_serial_write): New function, a replacement for SERIAL_WRITE
that prints debugging information.
* config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
(sparc_push_arguments): Declare.
* configure.tgt: Switch over to use tm-4320.h. Since I switched to
MIPS EABI the fixes are no longer backward compatible with 4300.
* tm-vr4320.h: Added
* vr4320.mt: Added
zap one group of persistent gdb testomat failures.
Mon Apr 13 22:32:51 1998 Frank Ch. Eigler <fche@cygnus.com>
* gdb.c++/virtfunc.cc: Make extern "C" printf declaration pass
more rigorous EGCS C++ error checking.
* utils.c: (warning) added call to warning_hook
* source.c: (find_source_lines) modified to call warning in case
of source vs. executable time stamp mismatch. Simplified object
file check. Initialized mtime to 0.
* defs.h: added warning_hook prototype
* top.c: added warning_hook prototype.
* gdbtk.c: (perror_with_name_wrapper) new function to call
perror_with_name safely.
(gdb_loadfile) added source vs. executable time stamp check.
(gdbtk_warning) new function to pass a warning message to the gui.
(gdbtk_ignorable_warning) new function to pass a warning
to the gui. Used only for the src. vs. exec check.
(gdbtk_init) added warning_hook
added include <sys/stat.h>
timer interval a little.
(gdbtk_stop_timer): Include on all platforms.
(gdbtk_wait): No more signals! Use a timer on all platforms to keep the
GUI alive.
(gdbtk_init): Remove FIOASYNC and all x_fd references. Now using timers
on all platforms.
Update support for x86 Solaris 2.
* config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
files for x86 Solaris 2.
* config/i386/i386sol2.mt, i386sol2.mh: Use them.
* config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
carry flag from a given regset.
(IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
is a SunPro transformed name.
* i386-tdep.c (sunpro_static_transform_name): New function to
extract the source name from a SunPro transformed name.
* inferior.h (procfs_first_available, procfs_get_pid_fd):
Add prototypes.
* infrun.c (wait_for_inferior): Handle breakpoint hit in
signal handler without intervening stop in sigtramp.
* procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
instead of direct access to the status register.
(procfs_get_pid_fd): New function, returns procfs fd for a given pid.
* sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
lwpid.
(sol_find_new_threads): Handle failed libthread_db initialization
gracefully.
* stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
to check for a SunPro transformed symbol name.
* gdb.base/help.exp: Clean up `help set args' and `help show args'
tests.
* gdb.base/interrupt.exp: Add "i*86-*-solaris2*" xfail for calling
function when asleep.
* gdb.base/signals.exp: Add "i*86-*-solaris2*" xfails. Add comment
for i*86 Linux and SVR4 signal handling problems.
Remove linux xfail for `next to handler in signals_tests_1', fixed
by recent infrun.c change.
Limit backtrace to 10 frames to avoid timeout problems with infinite
stack backtraces.
Adjust expect pattern in `handle all print' test to match Apr 28 1997
target.[ch] change.
* mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
bit pattern interpretations. mips_fetch_instruction does not work
for 16 bit instructions. Some confusion remains about sign
extension in backward branches.
(mips32_relative_offset): Sign extension
(mips32_next_pc): Major debugging, bit pattern interpretation
(print_unpack): debugging printf
(fetch_mips_16): new funtion, key on PC low bit, not symbol table
(mips16_next_16): Initial major debugging of this function. Lots
of bit pattern mistakes.
(mips_next_pc): key on low bit of PC, not symbol table.
* symfile.c(generic_load) : Added a download verification which
reads back the loade code. Download chunk size is now a defined
macro. Fixed a bug in which downloading slips into loading one
byte at a time. Lower level functions in monitor.c can load long
sequences of bytes and make use of these fixups. Referencing
bfd-start_address directly was incorrectly getting zero for start.
section in an ELF file, override a symbol's ECOFF section with its
ELF section. Also, fix stabs continuation where a stabs string
continues for more than one continuation.
Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com>
* sol-thread.c (sol_thread_store_registers): Save & restore new
value of single updated register to prevent accidental clobbering.
* ns32k-tdep.c (flip_bytes, ns32k_localcount,
ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
deleted.
* ns32knbsd-nat.c: New (?) file to support fetching and storing
registers on NetBSD hosts.
* nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
ns32k-nat.o
* ns32km3-nat.c (reg_offset): Get order of floating point
registers correct. Add extra 32382 register offsets.
(REG_ADDRESS): define to point at correct part of thread
state. Use calls to "warning" instead of "message".
* tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
fpu registers.
* rdi-share/Makefile.am, rdi-share/aclocal.m4,
rdi-share/configure: New files.
* rdi-share/configure.in: Rewritten to be an autoconf input file.
* rdi-share/Makefile.in, rdi-share/configure: Generated by
automake/autoconf.
* rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
to check environment.
automake/autoconfiscate rdi-share. We don't use the checks that autoconf
provides too much for now, but it'll be easier to use them if any problems
crop up in the future. (rdi-share/ is foreign code and it probably isn't
worth spending any more time than necessary messing with it.)
* gdbtk.c: (gdb_trace_status) new function.
(gdbtk_init) added command "gdb_is_tracing".
(tracepoint_notify) added passcount information.
* tracepoint.c (trace_status_command): Recognize a boolean return
value from the stub to indicate whether trace experiment is
running. Export this value as a global state variable
(trace_running_p) for use by the GUI. (from Michael Snyder)
(trace_pass_command) added call to modify_tracepoint_hook.
* tracepoint.h export trace_running_p
* gdbtk.c (gdbtk_fputs): Insert fencepost.
(gdb_loc): Correct pc calculation.
(gdb_immediate_command): Return if a load is in progress.
(gdb_cmd): Return if a load is in progress.
(target_stop_wrapper): New function.
(gdb_stop): Call target_stop_wrapper.
(x_event): Add fencepost and optimize load cancel check.
(gdbtk_start_timer): Set up structs only once.
(gdbtk_stop_timer): Just use preset structs to set timer parameters.
(gdb_loadfile): If file cannot be loaded, return error message.
(gdb_loadfile): Add space before tab so that lines without
a '-' can later be changed to have one.
* config/d10v/d10v.mt config/d30v/d30v.mt config/m32r/m32r.mt
config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
from SIM. This prevents dependency checking of -lm (under NT
native builds). (It is automatically added by configure if it
exists.)
* doc/configure mswin/configure nlm/configure
testsuite/gdb.base/configure testsuite/gdb.c++/configure
testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
Regenerate with autoconf 2.12.1 to fix shell issues for NT native
builds.
* breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
like bp_breakpoints.
* solib.c (solib_create_inferior_hook): Relocate section addresses
if the alleged start address doesn't agree with the PC.
merged changes from Foundry (list follows by file/author):
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* ser-unix.c
- Keith Seitz <keiths@onions.cygnus.com>
(wait_for): Don't reset the timeout_remaining for CYGWIN32,
since we now effectively poll the serial port.
Don't reset the current_timeout, either, since this member is used
by hardwire_readchar to track the timeout and call the ui_loop_hook.
(hardwire_readchar): Poll the serial port for Cygwin32. We timeout every
second, update the UI, and loop around doing this until we have hit the real
timeout or we get data or an error. This will allow the UI to stay active
while gdb is "blocked" talking to the target.
- Martin M. Hunt <hunt@cygnus.com>
(wait_for): Do reset current_timeout
because it is only used to keep track of what the
current timeout for the scb is.
* top.c
- Martin M. Hunt <hunt@cygnus.com>
(quit_confirm): Change exit message again
for GUI.
(pc_changed_hook): Add prototype.
- Tom Tromey <tromey@cygnus.com>
(quit_confirm): Added missing `else'.
(quit_confirm): Special-case message if init_ui_hook is
set.
* symtab.c
- Martin M. Hunt <hunt@cygnus.com>
(find_pc_sect_line): If no symbol information
is found, return correct pc anyway.
(find_methods): Comment out an apparently
bogus error message because it messes up Foundry.
* serial.c
- Martin M. Hunt <hunt@cygnus.com>
(_initialize_serial): Add a description of
"set remotelogbase".
* findvar.c
- Martin M. Hunt <hunt@cygnus.com>
(write_register_gen): Add call to
pc_changed_hook if the PC is being changed.
* defs.h
- Martin M. Hunt <hunt@cygnus.com>
(pc_changed_hook): Define.
* command.c
- Martin M. Hunt <hunt@cygnus.com>
(do_setshow_command): If no arguments are supplied,
don't dump core, instead print out an error message.
* breakpoint.c
- Martin M. Hunt <hunt@cygnus.com>
Make set_raw_breakpoint, set_breakpoint_count,
and breakpoint_count non-static so they are accessible from
gdbtk.c.
(enable_breakpoint): Enable breakpoint
with same disposition instead of changing all breakpoints
to donttouch.
* annotate.h
- Keith Seitz <keiths@onions.cygnus.com>
Add declarations for annotation hooks.
* annotate.c
- Keith Seitz <keiths@onions.cygnus.com>
Add hooks: annotate_starting_hook, annotate_stopped_hook,
annotate_signalled_hook, annotate_exited_hook.
(annotate_starting): If hook exists, call it instead.
(annotate_stopped): If hook exists, call it instead.
(annotate_exited): If hook exists, call it instead.
(annotate_signalled): If hook exists, call it instead.
Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
Merged changes from Foundry: list follows by author:
- Tom Tromey <tromey@cygnus.com>
* Makefile.in (gdbres.o): New target.
(WINDRES): New define.
* configure: Rebuilt.
* configure.in (WINDRES): Define.
(CONFIG_OBS): Include gdbres.o on Windows.
* gdbtool.ico: New file.
* gdb.rc: New file.
* gdbtk.c (gdbtk_init): Call ide_create_messagebox_command.
(gdbtk_cleanup): Call ide_interface_deregister_all.
(gdbtk_init): Pass event handle to cleanup.
(TclDebug): Use Tcl_Merge to construct command.
(gdbtk_init): Call ide_create_cygwin_path_command.
- Martin M. Hunt <hunt@cygnus.com>
* gdbtk.c (gdb_set_bp): Set addr_string for bp.
(gdb_get_breakpoint_info): Demangle function
names in breakpoint info.
Include "demangle.h".
(gdb_loc, gdb_listfuncs): Demangle C++
function names.
(gdb_set_bp): Properly quote filename to fix
problems with spaces. Send pc back as a hex string.
(gdb_listfuncs): Remove debugging line.
Turn off some debugging lines.
(breakpoint_notify): Return correct line number.
(gdb_get_breakpoint_info): Return correct line number.
(gdb_set_bp): New function to provide a better way to
set breakpoints.
(gdbtk_readline, gdbtk_readline_begin): Memory
allocated by tcl needs to be freed by Tcl_Free().
(find_file_in_dir): Deleted.
(gdb_find_file_command): Call full_lookup_symtab().
(gdb_listfuncs): Call full_lookup_symtab().
(full_lookup_symtab): New function. Like lookup_symtab
except handles multiple files with the same basename,
full pathnames, and always sets symtab->fullname.
(gdb_loadfile): Call full_lookup_symtab(). Clear
realloc'd memory.
(gdb_loadfile): Don't tag lines without source.
Tag source lines with source_tag.
(gdb_find_file_command, find_file_in_dir):
Rewrite. Now searches symtabs and psymtabs for a match
on the partial or full filename. Returns the full pathname.
(gdb_loadfile): Realloc additional memory
if someone loads in a file with more than 160,000
lines. I don't know if this really works because
I don't have enough memory to test it.
(gdb_sourcelines): Deleted.
(gdb_loadfile): New function. Takes a text widget
and loads it with the contents of a file. Marks
and tags source lines.
(pc_changed): New function.
(get_pc_register): Returns the value of
the PC to GDB.
(gdb_loc): If looking on the stack, return
real pc along with calling source line.
(gdb_loc): Return "" instead of "N/A" if
filename is not found.
(gdb_get_breakpoint_info): Same.
(get_register): For Natural mode, set format to 0.
Minor bugfixes from keiths.
(TclDebug): New function for debugging use.
(gdb_loc): Return correct PC for frames
that are not the innermost frame.
(gdb_listfiles): Rewritten to use object
API. Now takes an optional dirname which will cause
only files in that directory or its subdirectories
to be returned. Now returns basenames instead of
full pathnames.
(gdb_cmd): Set/reset load_in_progress flag.
(call_wrapper): Don't pop up dialog for errors in
downloads; just abort download.
(gdbtk_load_hash): Set return value correctly.
- Keith Seitz <keiths@onions.cygnus.com>
* gdbtk.c (gdbtk_init): Define the ui_loop_hook so that it can be
called by routines which might block, allowing us to update the GUI.
(gdbtk_wait): Move timer calls to annotation hooks.
(gdbtk_init): Define the annotation hooks.
(gdbtk_annotate_starting): New function for cygwin32 hosts.
(gdbtk_annotate_stopped): New function for cygwin32 hosts.
(gdbtk_annotate_exited): New function for cygwin32 hosts.
(gdbtk_annotate_signalled): New function. for cygwin32 hosts.
(gdbtk_init): Use gdbtk_print_frame_info hook.
(gdbtk_print_frame_info): New function which sets current_source_symtab
based on the given symtab and line info.
(gdb_immediate_command): New function which does
not buffer any
output. (Contrast to gdb_cmd.)
(gdb_prompt_command): New function to return gdb's prompt.
(find_file_in_dir): New functon which searches source paths
for a given filename.
(gdb_find_file): New function which returns path to given file -- uses
find_file_in_dir.
(gdbtk_init): Install "gdb_immediate", "gdb_find_file", and
"gdb_prompt"
commands into interpreter.
- Ian Lance Taylor <ian@cygnus.com>
* gdbtk.c (gdbtk_timer_going): If __CYGWIN32__, new static
variable.
(gdb_cmd): If __CYGWIN32__, if executing the load command, call
gdbtk_start_timer and gdbtk_stop_timer.
(call_wrapper): If __CYGWIN32__, if the timer is going, turn it
off. Clear load_in_progress.
(x_event): If load_in_progress, quit if download_cancel_ok.
(gdbtk_start_timer): Set gdbtk_timer_going.
(gdbtk_stop_timer): Clear gdbtk_timer_going.
(gdbtk_wait): Call x_event.
(gdbtk_init): Call ide_create_win_grab_command if
__CYGIN32__.
(gdb_clear_file): Clear stop_pc.
* gdbserver/Makefile.in: add dependency on XM_CLIBS.
* gdbserver/low-sim.c (registers) force into alignment.
(create_inferior): Fix typo on new_argv; add abfd arg to
sim_open, sim_create_inferior. Add reg_size arg to
sim_fetch_register, sim_store_register. Make simulator
take a single-step to get into a known running state.
* gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
* gdbserver/server.c: Add remote_debug variable to control
debug output.
* gdbserver/server.h: Add prototypes for enable/disable_async_io.
* gdbserver/remote-utils.c: add verbose debugging output controlled
by "remote_debug" variable. Add call to "disable_async_io()"
to avoid being killed by async SIGIO signals.
* config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
so that gdbserver can be built with the m32r simulator.
unsigned types.
Specify size of r5900 FSR using 32 bit unsigned type.
Correctly format mips registers when some are not 64 bits in size
Check that REGISTER_{RAW,VIRTUAL}_SIZE are consistent when the target
specifies that no conversion is needed when moving from one to the
other.
* minsyms.c (compare_minimal_symbols): If addresses are identical,
then compare on names. Sorted list should have symbols with
identical addresses AND names adjacent, so dups can be discarded.
* config/m68k/xm-sun3os4.h: Remove malloc declarations, they
are handled via autoconf now.
* remote.c (remote_ops, extended_remote_ops): Replace static
forward declaration by moving the static definition to the top of
the file, for old K&R compilers.
* tracepoint.c (collect_symbol, trace_start_command):
Replace ANSI string concatenation with K&R compatible simple string.
* utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
SERIAL_FLUSH_OUTPUT.
* serial.h (struct serial_ops): Add drain_output, pointer to
function that waits for output to drain.
(SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
* ser-unix.c (hardwire_drain_output): New function and prototype.
* ser-unix.c (hardwire_ops): Add entry for drain_output function.
* ser-tcp.c (tcp_ops): Ditto.
* ser-ocd.c (ocd_ops): Ditto.
* ser-mac.c (mac_ops): Ditto.
* ser-go32.c (dos_ops): Ditto.
* ser-e7kpc.c (e7000pc_ops): Ditto.
