save the indices of the MIPS_EFI_SYMBOL_NAME symbol rather than
looking them up by the names of the functions.
* mipsread.c (mylookup_symbol): Use strcmp, not STREQ, as we have
already checked the first characters.
* printcmd.c (makeva_list): Use MAKEVA_EXTRA_INFO to define
machine dependent fields in the makeva_list structure.
(makeva_size): Allocate extra space to handle gaps made by
alignment restrictions.
* config/pa/xm-pa.h (MAKEVA_EXTRA_INFO): Define.
(MAKEVA_START): Initialize arglist_address field.
(MAKEVA_ARG): Always store arguments on natural alignment
boundaries. Set arglist_address to the address right after
the args.
(MAKEVA_END): Simply return the value stored in arglist_address.
Fri Jun 25 17:02:45 1993 Stu Grossman (grossman at cygnus.com)
* gdbserver/Makefile.in: Add dependancies on server.h.
* gdbserver/remote-gutils.c: Remove lots of unused functions and
variables.
* gdbserver/remote-inflow.c: Remove lots of unused variables and
#includes. Also, use PTRACE_* symbols instead of constants.
(mywait): Surround calls to wait() with enable/disable_async_io()
so that we can be interrupted from GDB while waiting for the
child. Also, handle child exit more gracefully.
* gdbserver/remote-server.c: Remove lots of unused variables.
Move all extern defs into server.h. Redo main loop so that
failure from getpkt() causes communications to be re-established.
Fix 'k' command so that it restarts the child.
* gdbserver/remote-utils.c: Remove lots of unloved vars and
subrs. Move many extern decls into server.h. (remote_open): For
tcp, seperate usage of proto fd from connected fd. Close proto
fd after getting connection. (putpkt/getpkt): Pay attention to
errors when reading/writing. Report these to the caller. New
routines input_interrupt/enable_async_io/disable_async_io to make
it possible to get an I/O interrupt when data arrives from the
comm link.
* serial.h: New file to contain common defs for all remote files.
* stabsread.c (define_symbol): Make the caddr_t hack apply to `function
returning foo' as well as `pointer to foo'.
* remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined.
* config/m68k/tm-m68k.h: Define it.
* mem-break.c, breakpoint.c: Improve comments.
Tue Jul 13 13:35:31 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
* config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h".
* config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO.
val.end is in the same function, not minimal symbols.
* source.c (line_info): Add a few more wrap_here's.
* i386-tdep.c (i386_follow_jump): Do byteswapping where needed and
don't make assumptions about sizes of host data types.
* blockframe.c, symtab.h (find_pc_partial_function): New arg endaddr.
* infrun.c, breakpoint.c, printcmd.c: Change callers.
* printcmd.c (containing_function_bounds): Remove.
* printcmd.c (disassemble_command): Use find_pc_partial_function,
not containing_function_bounds.
* infcmd.c (step_1): Use find_pc_partial_function rather than
trying to roll our own. Move check for a pc between SIGTRAMP_START and
SIGTRAMP_END in find_pc_partial_function, not step_1.
Keep unswapped value in array of char, not REGISTER_TYPE.
Use REGISTER_RAW_SIZE not sizeof (REGISTER_TYPE).
(sparc_extract_struct_value_address): Use TARGET_PTR_BIT not
sizeof (CORE_ADDR).
step_resume_break_address with step_resume_breakpoint (now local
to wait_for_inferior).
({insert,remove}_step_breakpoint): Remove.
(wait_for_inferior): Set step resume break with
set_momentary_breakpoint. Test hitting it with bpstat_stop_status
and bpstat_what (stop_step_resume_break removed).
* breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct
which includes previous return value as main_action, and a step_resume
bit.
* breakpoint.c (delete_breakpoint): If breakpoint was inserted, and
there is another breakpoint there, insert it.
* infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use
a few more gotos.
Various: Clean up and add comments.
* h8300-tdep.c (NEXT_PROLOGUE_INSN): Make pword1 an INSN_WORD *
not short *.
* findvar.c, defs.h
({extract,store}_{signed_integer,unsigned_integer,address}):
New routines to replace SWAP_TARGET_AND_HOST.
All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
({extract,store}_{signed_integer,unsigned_integer,address}):
New routines to replace SWAP_TARGET_AND_HOST.
All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
Change error message in (another) attempt to make it comprehensible.
* valops.c (call_function_by_hand): Pass name to run_stack_dummy.
* symtab.h: Declare demangle and asm_demangle since macros use them.
config/gould/tmp-{pn,np1}.h,
config/{sparc/tm-sparc.h,pyr/tm-pyr.h,vax/tm-vax.h}: Remove field
next_frame from struct frame_info. It has no purpose beyond
->next->frame and is an artifact from GDB 2.8.
* signals.h: Don't undefine signals anymore.
* main.c: Use job_control from serial.h.
* fork-child.c (fork_inferior): Use gdb_setpgid.
* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
* utils.c (quit): Use current_target->to_terminal_ours to figure
out whether we care about lack of job control, rather than __GO32__.
* utils.c: Include serial.h not terminal.h
(quit): Use job_control not TIOCGPGRP.
* terminal.h: Don't undefine TIOCGPGRP.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
* utils.c (quit): Use it.
* serial.h: Add SERIAL_UN_FDOPEN.
* utils.c (quit): Use it.
* ser-unix.c: Add process group to ttystate.
[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
* inflow.c: Include serial.h not terminal.h.
Use serial.h stuff to replace most of the maze of #ifdef's.
* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
SERIAL_SET_PROCESS_GROUP.
* inflow.c: Use them.
* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
Define HAVE_TERMIOS.
* Various: Remove all use of TIOC*_BROKEN.
a function to avoid printing of function arguments in wrong order
due to sorting.
* symfile.c (compare_symbols): Remove code for sorting arguments
as blocks containing arguments are no longer sorted.
* symtab.c (lookup_block_symbol): Update comment accordingly.
clarification. Also add prototypes for some new functions.
* (remote_wait): Better error reporting for 'T' responses.
* ser-go32.c (strncasecmp): Make str1 & str2 be const.
* (dos_async_init): Make usage message reflect requested port #.
* ser-tcp.c (tcp_open): Terminate hostname properly to prevent
random hostname lookup failures. Add nicer message for unknown
host error. (wait_for): Wake up in case of exceptions. Also,
restart select() if we got EINTR.
* ser-unix.c (wait_for): Restart select() if we got EINTR.
* serial.c: (serial_close): Clean up code.
Make comment explaining this comprehensible.
(TAGFILES): Include ALLDEPFILES.
(ALLDEPFILES): udi2soc.c and udr.c are in 29k-share/udi, not
29k-share/udi/udi.
(update-alldeps): Remove; obsolete.
* NEWS: Mention filename completion and "info line" enhancements.
* main.c (symbol_completion_function): On "info t foo", return NULL,
don't error().
* main.c (symbol_completion_function): Don't use readline word
breaking. Use new calling convention for c->completer and
complete_on_cmdlist.
* command.h (struct command): Change arguments; now the text passed
to completer does not have any word breaking done. New arg word.
* symtab.{c,h} (make_symbol_completion_list): Do word breaking. Take
word argument.
* {main.c,gdbcmd.h} ({filename,noop}_completer): Take word argument.
* command.{c,h} (complete_on_cmdlist): Take word argument.
* command.c (lookup_cmd_1): Doc fix.
* Makefile.in (HFILES): Include monitor.h.
* Makefile.in: Include text that used to be in alldeps.mak.
Remove config/mips/{bigmips.mh,xm-bigmips} from it.
* Makefile.in, configure.in: Remove all traces of alldeps.mak.
per standards.texi.
New option --version per standards.texi.
In help message, show long options with "--" not "-".
Don't try to print help message or version until after we have
called initialize_all_files.
