Commit graph

366 commits

Author SHA1 Message Date
Daniel Jacobowitz
89be209149 gdb/
* remote.c (PACKET_QPassSignals): New.
	(last_pass_packet, remote_pass_signals): New.
	(remote_protocol_features): Add QPassSignals.
	(remote_query_supported): Correct an infinite loop.
	(remote_open_1): Reset last_pass_packet.
	(remote_resume): Call remote_pass_signals.
	(_initialize_remote): Register "set remote pass-signals".
gdb/doc/
	* gdb.texinfo (Remote configuration): Mention
	"pass-signals-packet".
	(General Query Packets): Document QPassSignals.  Fix
	a typo.
gdb/gdbserver/
	* linux-low.c (linux_wait_for_event): Reformat.  Use the
	pass_signals array.
	* remote-utils.c (decode_address_to_semicolon): New.
	* server.c (pass_signals, handle_general_set): New.
	(handle_query): Mention QPassSignals for qSupported.
	(main): Call handle_general_set.
	* server.h (pass_signals, decode_address_to_semicolon): New.
2006-11-16 15:08:25 +00:00
Daniel Jacobowitz
427c3a89d3 gdb/
* remote.c (set_remote_cmd): Call help_list.
	(show_remote_cmd): Skip legacy aliases.  Handle non-show_cmd
	entries.  Add missed cleanup.
	* cli/cli-setshow.c (cmd_show_list): Handle non-show_cmd entries.
gdb/doc/
	* gdb.texinfo (Remote configuration): Rewrite documentation for
	packet configuration commands.
	(OS Information): Adjust reference to qXfer:auxv:read.
	(General Query Packets): Remove references to read-aux-vector-packet
	and set remote get-thread-local-storage-address.
2006-11-14 21:40:19 +00:00
Paul Brook
3732ba62b9 2006-10-21 Paul Brook <paul@codesourcery.com>
* remote.c (remote_fetch_registers): Fix error message.
2006-10-21 17:59:08 +00:00
Ulrich Weigand
f86172a554 * linux-thread-db.c (check_for_thread_db): Don't attempt to use
thread_db for remote targets.
	* remote.c (remote_new_objfile): Always call predecessor on
	new_objfile event chain.
2006-10-20 01:08:14 +00:00
Daniel Jacobowitz
8621d6a944 * inferior.h (start_remote): Update prototype.
* infrun.c (start_remote): Take FROM_TTY.  Call
	post_create_inferior.
	* monitor.c (monitor_open): Update call to start_remote.
	* remote-sds.c (sds_start_remote, sds_open): Likewise.
	* remote.c (remote_start_remote): Likewise.
	(remote_start_remote_dummy): Removed.
	(remote_open): Update call to remote_start_remote.  Do not call
	post_create_inferior here.
2006-10-18 16:56:13 +00:00
Daniel Jacobowitz
32a5b2f1dd * remote.c (remote_pid_to_str): Capitalize "Thread". 2006-10-17 15:43:51 +00:00
Daniel Jacobowitz
9b7194bcb4 PR remote/2158
* remote.c (remote_write_bytes): Throttle packet alignment
	for small packets.
2006-10-16 03:08:37 +00:00
Daniel Jacobowitz
0b83947edd * remote.c (get_remote_state_raw): Renamed from get_remote_state.
(get_remote_state): New function.
	(init_remote_state, _initialize_remote): Use get_remote_state_raw.
2006-10-05 19:20:52 +00:00
Daniel Jacobowitz
f08799f98e * remote.c (remote_write_bytes_aux): Doc fix. 2006-09-22 13:50:36 +00:00
Daniel Jacobowitz
a76d924dff * Makefile.in (SFILES): Add target-memory.c.
(COMMON_OBS): Add target-memory.o.
	* memattr.c (lookup_mem_region): Adjust handling for
	the top of memory.  Improve comments.
	* remote.c (packet_check_result): New function, split out
	from packet_ok.  Recognize "E." as an error prefix.
	(packet_ok): Use it.
	(remote_write_bytes_aux): New function, renamed from
	remote_write_bytes.  Take packet header, packet format,
	and length flag as arguments.
	(remote_write_bytes): Rewrite to use remote_write_bytes_aux.
	(remote_send_printf, restore_remote_timeout)
	(remote_flash_timeout, remote_flash_erase, remote_flash_write)
	(remote_flash_done): New.
	(remote_xfer_partial): Handle flash writes.
	(init_remote_ops, init_remote_async_ops): Set to_flash_erase
	and to_flash_done.
	* symfile.c (struct load_section_data): Include a pointer to
	the cumulative stats and a request queue.  Move most members
	to other types.
	(struct load_progress_data, struct load_progress_section_data): New
	types.
	(load_progress): Handle a NULL baton and zero bytes.  Update for
	type changes.
	(load_section_callback): Create memory write requests instead of
	writing to memory.  Don't print the progress message here.
	(clear_memory_write_data): New function.
	(generic_load): Use target_write_memory_blocks.
	* target-memory.c: New file.
	* target.c (update_current_target): Mention new uninherited methods.
	(memory_xfer_partial): Issue an error for flash writes.
	(target_flash_erase, target_flash_done): New functions.
	(target_write_with_progress): Call the progress callback at the
	start also.
	* target.h (enum target_object): Add TARGET_OBJECT_FLASH.
	(target_write_with_progress): Update comment.
	(struct target_ops): Add to_flash_erase and to_flash_done.
	(target_flash_erase, target_flash_done, struct memory_write_request)
	(memory_write_request_s, enum flash_preserve_mode)
	(target_write_memory_blocks): New, including a vector type
	for memory_write_request_s.
2006-09-21 14:00:53 +00:00
Daniel Jacobowitz
fd79eceebf gdb/
2006-09-21  Vladimir Prus  <vladimir@codesourcery.com>
	    Daniel Jacobowitz  <dan@codesourcery.com>
	    Nathan Sidwell  <nathan@codesourcery.com>

	* Makefile.in (SFILES): Add memory-map.c and xml-support.c.
	(memory_map_h, xml_support_h): New.
	(target_h): Add vec_h dependency.
	(COMMON_OBS): Add memory-map.o and xml-support.o.
	(memory-map.o, xml-support.o): New rules.
	(remote.o): Update.
	* exceptions.h (enum errors): Add XML_PARSE_ERROR.
	* infcmd.c (run_command_1, attach_command): Call target_pre_inferior.
	* memattr.c (default_mem_attrib): Initialize blocksize.
	(target_mem_region_list, mem_use_target)
	(target_mem_regions_valid, mem_region_cmp, mem_region_init)
	(require_user_regions, require_target_regions)
	(invalidate_target_mem_regions): New.
	(create_mem_region): Use mem_region_init.
	(mem_clear): Move higher.
	(lookup_mem_region): Use require_target_regions.
	(mem_command): Implement "mem auto".
	(mem_info_command): Handle target-supplied regions and flash
	attributes.
	(mem_enable_command, mem_disable_command, mem_delete_command): Use
	require_user_regions.
	(_initialize_mem): Mention "mem auto" in help.
	* memattr.h (enum mem_access_mode): Add MEM_FLASH.
	(struct mem_attrib): Add blocksize.
	(invalidate_target_mem_regions, mem_region_init, mem_region_cmp): New
	prototypes.
	* remote.c: Include "memory-map.h".
	(PACKET_qXfer_memory_map): New enum value.
	(remote_protocol_features): Add qXfer:memory-map:read.
	(remote_xfer_partial): Handle memory maps.
	(remote_memory_map): New.
	(init_remote_ops, init_remote_async_ops): Set to_memory_map.
	(_initialize_remote): Register qXfer:memory-map:read.
	* target.c (update_current_target): Mention to_memory_map.
	(target_memory_map, target_pre_inferior): New.
	(target_preopen): Call target_pre_inferior.
	* target.h: Include "vec.h".
	(enum target_object): Add TARGET_OBJECT_MEMORY_MAP.
	(struct target_ops): Add to_memory_map.
	(target_memory_map, target_pre_inferior): New prototypes.
	* memory-map.c, memory-map.h, xml-support.c, xml-support.h: New files.
gdb/doc/
2006-09-21  Vladimir Prus  <vladimir@codesourcery.com>
	    Daniel Jacobowitz  <dan@codesourcery.com>

	* gdb.texinfo (Memory Region Attributes): Mention target-supplied
	memory regions and "mem auto".
2006-09-21 13:54:03 +00:00
Daniel Jacobowitz
2e9f762528 PR remote/2154
* remote.c (remote_thread_alive): Remove local buf.
	(remote_get_threadinfo): Remove local threadinfo_pkt.
	(remote_get_threadlist): Remove unused threadlist_packet.
	(remote_current_thread): Remove local buf.
	(remote_threads_info): Set bufp after getpkt.
	(remote_threads_extra_info): Remove local bufp.
	(get_offsets): Set buf after getpkt.
	(remote_check_symbols): Set reply after getpkt.
	(remote_vcont_probe): Set buf after getpkt.
	(remote_resume): Set buf after set_thread.
	(remote_wait, remote_async_wait): Set buf after getpkt.
	(fetch_register_using_p): Set buf after remote_send.
	(remote_fetch_registers): Likewise.
	(store_register_using_P): Don't use buf after remote_send.
	(check_binary_download, remote_write_bytes)
	(remote_read_bytes, remote_rcmd): Remove local buf.
2006-09-20 19:13:02 +00:00
Daniel Jacobowitz
2bc416ba69 * remote.c, target.c: Strip trailing whitespace. 2006-08-16 18:31:03 +00:00
Daniel Jacobowitz
b2182ed226 * remote.c (remote_write_bytes): Take a const buffer argument.
Do the checks from remote_xfer_memory.
	(remote_read_bytes): Do the checks from remote_xfer_memory.
	(remote_xfer_memory): Remove checks pushed into lower level
	functions.
	(remote_xfer_partial): Call remote_write_bytes and remote_read_bytes
	directly.
	* remote.h (remote_write_bytes): Update prototype.
2006-08-15 18:17:57 +00:00
Daniel Jacobowitz
40e57cf227 * remote.c (remote_protocol_features): Correct qPart to qXfer. 2006-07-27 00:06:02 +00:00
Daniel Jacobowitz
d49c44d5f1 * remote.c (unpack_varlen_hex): Correct type of retval.
Reported by Zhigang Gong <zhigang.gong@gmail.com>.
2006-07-13 04:05:54 +00:00
Daniel Jacobowitz
6765f3e5d0 * remote.c (REMOTE_ALIGN_WRITES): New.
(remote_write_bytes): Align large write packets.  Remove unused
	payload_start variable.
2006-07-12 18:54:03 +00:00
Daniel Jacobowitz
0876f84a6a gdb/
* remote.c (PACKET_qXfer_auxv): New, renamed from PACKET_qPart_auxv.
	(remote_supported_packet): Remove #if 0.
	(remote_protocol_features): Add qPart:auxv:read.
	(remote_unescape_input): New function.
	(readchar): Don't mask off the high bit.
	(read_frame): Use fputstrn_filtered for packet data.
	(getpkt_sane): Return the number of bytes read or -1.  Use
	fputstrn_unfiltered.
	(remote_read_qxfer): New.
	(remote_xfer_partial): Use it for TARGET_OBJECT_AUXV.
	(_initialize_remote): Update packet registration.
	* defs.h (fputstrn_filtered): New prototype.
	* utils.c (fputstrn_filtered): New.
	* NEWS: Mention qXfer.
gdb/doc/
	* gdb.texinfo (OS Information): Update qPart reference to
	qXfer.
	(Remote configuration): Likewise.
	(Overview): Move @cindex to the start of a paragraph.  Talk
	about binary data encoding.
	(Packets): Refer to the overview for the details of the X
	packet encoding.
	(General Query Packets): Remove qPart description.  Add qXfer
	description.  Add an anchor to qSupported.  Correct feature
	table title.  Add a new feature for qXfer:auxv:read.
	(Interrupts): Add a missing parenthesis.
gdb/gdbserver/
	* server.c (decode_xfer_read, write_qxfer_response): New.
	(handle_query): Take a packet length argument.  Handle
	qXfer:auxv:read instead of qPart:auxv:read.  Mention it in
	the qSupported response.
	(main): Update call to handle_query.
2006-07-12 18:50:18 +00:00
Daniel Jacobowitz
13547ab600 * target.c (target_read): Stop if target_read_partial returns 0
when some bytes have already been read.
	(target_write): Likewise for target_write_partial.
	(target_read_partial, target_write_partial): Make static.
	(target_read_alloc): New.
	* target.h: Doc fixes.
	(target_read_partial, target_write_partial): Delete prototypes.
	(target_read_alloc): New prototype.

	* auxv.c (target_auxv_read): Delete.
	(target_auxv_search, fprint_target_auxv): Use target_read_alloc.
	* auxv.h (target_auxv_read): Delete prototype.
	* avr-tdep.c (avr_io_reg_read_command): Use target_read_alloc.
	* ia64-tdep.c (getunwind_table, get_kernel_table): Likewise.
	* linux-nat.c (linux_nat_make_corefile_notes): Likewise.
	* procfs.c (procfs_make_note_section): Likewise.
	* remote.c (remote_xfer_partial): Don't loop here.
	* sparc-tdep.c (sparc_fetch_wcookie): Use target_read.
2006-07-12 18:13:45 +00:00
Daniel Jacobowitz
2ec3381a43 gdb/
* remote.c (remote_xfer_partial): Remove KOD support.
	* target.h (enum target_object): Remove TARGET_OBJECT_KOD.
	* MAINTAINERS: Move Kernel Object Display entry to past maintainers.
	* Makefile.in (SFILES, kod_h, COMMON_OBS, kod.o, kod-cisco.o): Remove KOD
	support.
	* mi/mi-cmds.c (mi_cmds): Remove dummy KOD commands.
	* NEWS: Mention KOD.
	* kod.h, kod.c, kod-cisco.c: Delete files.
gdb/doc/
	* doc/gdb.texinfo (KOD): Remove node.
	(GDB/MI Kod Commands): Remove commented out node.
2006-07-05 19:03:47 +00:00
Daniel Jacobowitz
7fca722e51 * remote.c (init_remote_state): Use xrealloc instead of xmalloc. 2006-07-04 13:31:31 +00:00
Daniel Jacobowitz
a31ea83d26 * remote.c (remote_escape_output): New function.
(remote_write_bytes): Use remote_escape_output.
2006-06-22 14:06:37 +00:00
Daniel Jacobowitz
be2a5f717b gdb/
* NEWS: Mention qSupported.
	* remote.c (struct remote_state): Add explicit_packet_size.
	(get_remote_packet_size): Check explicit_packet_size.
	(get_memory_packet_size): Likewise.
	(PACKET_qSupported): New enum value.
	(struct protocol_feature, remote_supported_packet)
	(remote_packet_size, remote_protocol_features)
	(remote_query_supported): New.
	(remote_open_1): Reset explicit_packet_size.  Call
	remote_query_supported.
	(_initialize_remote): Register qSupported.
gdb/doc/
	* gdb.texinfo (Remote configuration): Document set / show
	remote supported-packets.
	(General Query Packets): Document qSupported packet.
gdb/gdbserver/
	* server.c (handle_query): Handle qSupported.
2006-06-21 13:57:21 +00:00
Daniel Jacobowitz
bb572ddd39 * remote.c (set_remote_protocol_packet_cmd)
(show_remote_protocol_packet_cmd): New prototypes.
	(remote_set_cmdlist, remote_show_cmdlist): Move higher.
	(struct packet_config): Make name and title const.
	(add_packet_config_cmd): Remove unnecessary arguments.
	(_initialize_remote): Update calls.
2006-06-12 19:16:19 +00:00
Nathan Sidwell
ad9a8f3f00 * remote-fileio.c (remote_fileio_reset): New.
* remote-fileio.h (remote_fileio_reset): Prototype.
	* remote.c (extended_remote_restart, remote_open_1): Call it.
2006-06-08 19:08:22 +00:00
Nathan Sidwell
1dd41f16d1 * gdb/remote.c (remote_open_1): Do preopen tasks before
irreversably destroying state.
2006-06-08 19:04:08 +00:00
Daniel Jacobowitz
ea9c271d4e * (struct remote_state): New type, only containing
buf and buf_size.
	(remote_state): New variable.
	(get_remote_state): New function.
	(struct remote_arch_state): Renamed from struct remote_state.
	Removed buf and buf_size.
	(get_remote_arch_state): Renamed from get_remote_state.  All
	necessary callers updated to call this function.
	(init_remote_state): Initialize the architecture-specific state.
	Update the target-specific state if necessary.
	(get_remote_packet_size): New function.  All previous references
	changed to use this accessor function.
	(packet_reg_from_regnum, packet_reg_from_pnum): Take a
	remote_arch_state instead of a remote_state.  All callers changed.
	(_initialize_remote): Initialize the packet buffer here.
2006-06-08 18:32:12 +00:00
Nathan Sidwell
5cffb35013 * gdb/remote.c (remote_insert_watchpoint): Return -1, rather than
fatal error if packet is disabled.
	(remote_remove_watchpoint, remote_insert_hw_breakpoint,
	remote_remove_hw_breakpoint): Likewise.
2006-06-06 10:03:06 +00:00
Daniel Jacobowitz
597320e75b * remote.c (remote_disconnect): Add TARGET argument.
* target.c (debug_to_disconnect): Delete.
	(update_current_target): Do not inherit to_disconnect.
	(target_disconnect): Search for a target to implement to_disconnect.
	(setup_target_debug): Do not reference to_disconnect.
	* target.h (struct target_ops): Add target argument to
	to_disconnect.
2006-05-05 20:08:45 +00:00
Michael Snyder
cfde0993eb 2006-04-20 Michael Snyder <msnyder@redhat.com>
* remote.c: Fix spelling error in comment.
2006-04-26 18:45:32 +00:00
Daniel Jacobowitz
8181d85fdc gdb/
* breakpoint.c (deprecated_read_memory_nobpt): Update to use
	shadow_len.
	(insert_bp_location, reattach_breakpoints, remove_breakpoint)
	(delete_breakpoint): Update calls to changed methods.
	(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
	(single_step_breakpoints, insert_single_step_breakpoint)
	(remove_single_step_breakpoints): New.
	* breakpoint.h (struct bp_target_info): New.
	(struct bp_location): Replace shadow_contents with
	target_info and overlay_target_info.
	(deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint)
	(insert_single_step_breakpoint, remove_single_step_breakpoints): New
	prototypes.
	* gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h.
	(memory_insert_breakpoint, memory_remove_breakpoint): Update second
	argument.
	* mem-break.c (default_memory_insert_breakpoint): Update.  Set
	placed_address, placed_size, and shadow_len.
	(default_memory_remove_breakpoint): Update.  Don't use
	BREAKPOINT_FROM_PC.
	(memory_insert_breakpoint, memory_remove_breakpoint): Update.
	* target.c (update_current_target): Update prototypes for changed
	functions.
	(debug_to_insert_breakpoint, debug_to_remove_breakpoint)
	(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint):
	Update.
	* target.h: Forward declare struct bp_target_info.
	(struct target_ops): Use a bp_target_info argument for
	to_insert_breakpoint, to_remove_breakpoint,
	to_insert_hw_breakpoint, and to_remove_hw_breakpoint.
	(target_insert_breakpoint, target_remove_breakpoint)
	(target_insert_hw_breakpoint, target_remove_hw_breakpoint)
	(memory_insert_breakpoint, memory_remove_breakpoint)
	(default_memory_insert_breakpoint, default_memory_remove_breakpoint):
	Update.
	* config/i386/nm-i386.h: Forward declare struct bp_target_info.
	(i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update.
	(target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise.

	* gdbarch.c, gdbarch.h: Regenerated.

	* alpha-tdep.c (alpha_software_single_step): Use
	insert_single_step_breakpoint and remove_single_step_breakpoints.
	Remove unused statics.
	* arm-tdep.c (arm_software_single_step): Likewise.  Add a note.
	* cris-tdep.c (cris_software_single_step): Likewise.
	* mips-tdep.c (mips_software_single_step): Likewise.
	* rs6000-tdep.c (rs6000_software_single_step): Likewise.
	* sparc-tdep.c (sparc_software_single_step): Likewise.
	* wince.c (struct thread_info_struct): Remove step_prev.
	(undoSStep): Use remove_single_step_breakpoints.
	(wince_software_single_step): Use insert_single_step_breakpoint.

	* corelow.c (ignore): Remove unneeded prototype.  Update arguments.
	* exec.c (ignore): Likewise.
	* sol-thread.c (ignore): Likewise.

	* procfs.c (dbx_link_shadow_contents): Delete.
	(dbx_link_bpt): New.
	(procfs_mourn_inferior): Remove it if necessary.
	(remove_dbx_link_breakpoint): Use it.
	(insert_dbx_link_bpt_in_file): Set it.
	(procfs_init_inferior): Don't update dbx_link_bpt_addr.
	* rs6000-nat.c (exec_one_dummy_insn): Use
	deprecated_insert_raw_breakpoint and
	deprecated_remove_raw_breakpoint.
	* solib-irix.c (shadow_contents, breakpoint_addr): Delete.
	(base_breakpoint): New.
	(disable_break): Use it.
	(enable_break): Set it.

	* i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint):
	Update.
	* ia64-tdep.c (ia64_memory_insert_breakpoint)
	(ia64_memory_remove_breakpoint): Likewise.
	* m32r-tdep.c (m32r_memory_insert_breakpoint)
	(m32r_memory_remove_breakpoint): Likewise.
	* monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
	Likewise.  Remove unnecessary prototypes.  Use placed_address
	and placed_size.  Removed useless read from memory.
	* nto-procfs.c (procfs_insert_breakpoint)
	(procfs_remove_breakpoint, procfs_insert_hw_breakpoint)
	(procfs_remove_hw_breakpoint): Update.
	* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
	* ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise.
	* ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise.
	* remote-e7000.c (e7000_insert_breakpoint)
	(e7000_remove_breakpoint): Likewise.
	* remote-m32r-sdi.c (m32r_insert_breakpoint)
	(m32r_remove_breakpoint): Likewise.
	* remote-mips.c (mips_insert_breakpoint)
	(mips_remove_breakpoint): Likewise.
	* remote-rdp.c (remote_rdp_insert_breakpoint)
	(remote_rdp_remove_breakpoint): Likewise.
	(rdp_step): Use deprecated_insert_raw_breakpoint and
	deprecated_remove_raw_breakpoint.
	* remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint):
	Update.
	* remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint):
	Delete.
	(init_gdbsim_ops): Use memory_insert_breakpoint and
	memory_remove_breakpoint.
	* remote-st.c (st2000_insert_breakpoint)
	(st2000_remove_breakpoint): Update.  Remove unused
	BREAKPOINT_FROM_PC.
	* remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
	Update.  Use placed_address and placed_size.
	(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise.
gdb/doc/
	* gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
	and remove breakpoint prototypes.
	(Watchpoints): Move description of target_insert_hw_breakpoint and
	target_remove_hw_breakpoint ...
	(Breakpoints): ... to here.  Document target_insert_breakpoint and
	target_remove_breakpoint.
2006-04-18 19:20:08 +00:00
Daniel Jacobowitz
01d3a6ce13 * remote.c (extended_remote_restart): Pass the correct length
to getpkt.
2006-04-12 14:27:40 +00:00
Daniel Jacobowitz
670aa98f98 * remote.c (remote_wait): Convert warning to error before
parsing corrupt packets.
2006-04-07 16:15:58 +00:00
Daniel Jacobowitz
bb858e6a2c 2006-03-30 Vladimir Prus <ghost@cs.msu.su>
* remote.c (watchpoint_to_Z_packet): Use values of Z_packet_type enum
	instead of hardcoded integer literals.
2006-03-30 16:56:30 +00:00
Daniel Jacobowitz
6d820c5c12 * remote.c (struct remote_state): Add BUF and BUF_SIZE.
(init_remote_state): Initialize the new fields.
	(get_memory_packet_size): Update BUF and BUF_SIZE if necessary.
	(set_thread, remote_thread_alive, remote_unpack_thread_info_response)
	(remote_get_threadinfo, parse_threadlist_response)
	(remote_get_threadlist, remote_current_thread, remote_threads_info)
	(remote_threads_extra_info, extended_remote_restart, get_offsets)
	(remote_check_symbols, remote_open_1, remote_detach)
	(remove_vcont_probe, remote_vcont_resume, remote_resume)
	(remote_wait, remote_async_wait, fetch_register_using_p)
	(remote_fetch_registers, store_register_using_P)
	(remote_store_registers, check_binary_download, remote_write_bytes)
	(remote_read_bytes, remote_insert_breakpoint)
	(remote_remove_breakpoint, remote_insert_watchpoint)
	(remote_remove_watchpoint, remote_insert_hw_breakpoint)
	(remote_remove_hw_breakpoint, compare_sections_command)
	(remote_xfer_partial, remote_rcmd, packet_command)
	(remote_get_thread_local_address): Use the global incoming buffer
	instead of alloca or xmalloc.  Limit outgoing packets to
	rs->remote_packet_size and incoming packets to rs->buf_size.
	Update calls to getpkt and remote_send.
	(remote_send): Take arguments by reference.
	(putpkt_binary): Eliminate junkbuf.  Use skip_frame.
	(skip_frame): New function.
	(read_frame): Take arguments by reference.  Expand the packet
	buffer instead of issuing an error.
	(getpkt, getpkt_sane): Take arguments by reference.
	* remote.h (getpkt): Update prototype and doc.
	* tracepoint.c (remote_get_noisy_reply): Take arguments by
	reference.
	(target_buf): Change from array to pointer.
	(target_buf_size): New variable.
	(remote_set_transparent_ranges): Update call to getpkt.
	(trace_start_command, trace_stop_command, trace_status_command):
	Update calls to remote_get_noisy_reply.
	(finish_tfind_command): Take arguments by reference.
	(trace_find_command, trace_find_pc_command)
	(trace_find_tracepoint_command, trace_find_line_command):
	(trace_find_range_command, trace_find_outside_command): Update
	calls to finish_tfind_command.
	(_initialize_tracepoint): Initialize target_buf_size and target_buf.
2006-03-30 16:25:06 +00:00
Michael Snyder
94e0856891 2006-03-16 Michael Snyder <msnyder@redhat.com>
* remote.c (remote_watch_data_address): Fix typo in comment.
2006-03-17 00:25:45 +00:00
Daniel Jacobowitz
444abacaac * remote.c: Add an enumeration for configurable remote
packets.
	(remote_protocol_packets, set_remote_protocol_packet_cmd)
	(show_remote_protocol_packet_cmd): New.
	(remote_protocol_vcont)
	(set_remote_protocol_vcont_packet_cmd)
	(show_remote_protocol_vcont_packet_cmd)
	(remote_protocol_qSymbol)
	(set_remote_protocol_qSymbol_packet_cmd)
	(show_remote_protocol_qSymbol_packet_cmd)
	(remote_protocol_P, set_remote_protocol_P_packet_cmd)
	(show_remote_protocol_P_packet_cmd)
	(remote_protocol_Z)
	(set_remote_protocol_Z_software_bp_packet_cmd)
	(show_remote_protocol_Z_software_bp_packet_cmd)
	(set_remote_protocol_Z_hardware_bp_packet_cmd)
	(show_remote_protocol_Z_hardware_bp_packet_cmd)
	(set_remote_protocol_Z_write_wp_packet_cmd)
	(show_remote_protocol_Z_write_wp_packet_cmd)
	(set_remote_protocol_Z_read_wp_packet_cmd)
	(show_remote_protocol_Z_read_wp_packet_cmd)
	(set_remote_protocol_Z_access_wp_packet_cmd)
	(show_remote_protocol_Z_access_wp_packet_cmd)
	(remote_protocol_binary_download)
	(set_remote_protocol_binary_download_cmd)
	(show_remote_protocol_binary_download_cmd)
	(remote_protocol_qPart_auxv)
	(set_remote_protocol_qPart_auxv_packet_cmd)
	(show_remote_protocol_qPart_auxv_packet_cmd)
	(remote_protocol_qGetTLSAddr)
	(set_remote_protocol_qGetTLSAddr_packet_cmd)
	(show_remote_protocol_qGetTLSAddr_packet_cmd)
	(remote_protocol_p)
	(set_remote_protocol_p_packet_cmd)
	(show_remote_protocol_p_packet_cmd): Delete.

	(init_all_packet_configs): Simplify.
	(set_remote_protocol_Z_packet_cmd)
	(show_remote_protocol_Z_packet_cmd)
	(remote_check_symbols, remote_vcont_probe, remote_vcont_resume)
	(remote_fetch_registers, remote_prepare_to_store)
	(remote_store_registers, check_binary_download)
	(remote_write_bytes, remote_insert_breakpoint)
	(remote_remove_breakpoint, remote_insert_watchpoint)
	(remote_remove_watchpoint, remote_insert_hw_breakpoint)
	(remote_remove_hw_breakpoint, remote_xfer_partial)
	(remote_get_thread_local_address): Update for packet array.
	(_initialize_remote): Likewise; also update for common
	set/show commands.
2006-02-20 15:19:06 +00:00
Daniel Jacobowitz
37a105a123 * Makefile.in (remote.o): Update.
* remote.c (show_packet_config_cmd): Shorten messages.
	(remote_set_cmdlist, remote_show_cmdlist): Make file-static.
	(show_remote_cmd): Iterate.
	(_initialize_remote): Remove remote_set_cmdlist,
	remote_show_cmdlist.
2006-02-02 02:04:28 +00:00
Daniel Jacobowitz
9353355fa3 PR gdb/1914
* fork-child.c (fork_inferior): Don't call
	solib_create_inferior_hook.
	* infcmd.c (post_create_inferior): Call solib_add,
	solib_create_inferior_hook, and re_enable_breakpoints_in_shlibs.
	(attach_command): Don't call solib_add or
	re_enable_breakpoints_in_shlibs.  Call post_create_inferior
	instead.
	* remote.c (remote_open_1): Don't call solib_create_inferior_hook
	or observer_notify_inferior_created.  Call post_create_inferior
	instead.
	* corelow.c: Don't include "observer.h".
	(solib_add_stub): Deleted.
	(core_open): Don't call observer_notify_inferior_created or
	solib_add_stub.  Call post_create_inferior instead.
	* inf-ptrace.c: Don't include "observer.h".
	(inf_ptrace_attach): Don't call observer_notify_inferior_created.
	* inf-ttrace.c: Don't include "observer.h".
	(inf_ttrace_attach): Don't call observer_notify_inferior_created.
	* inferior.h (solib_create_inferior_hook): Remove redundant
	prototype.
	* inftarg.c: Don't include "observer.h".
	(child_attach): Don't call observer_notify_inferior_created.
	* Makefile.in: Update dependencies.
2006-01-24 22:34:34 +00:00
Daniel Jacobowitz
281b533b6c * infcmd.c: Include "observer.h".
(post_create_inferior): New function.
	(run_command_1): Call it.  Also call proceed.
	* inferior.h (post_create_inferior): New prototype.
	* Makefile.in (infcmd.o): Update.

	* gnu-nat.c (gnu_create_inferior): Don't call proceed.
	* go32-nat.c (go32_create_inferior): Likewise.
	* nto-procfs.c (procfs_create_inferior): Likewise.
	* procfs.c (procfs_create_inferior): Likewise.
	* remote-sim.c (gdbsim_create_inferior): Likewise.
	* remote.c (extended_remote_create_inferior)
	(extended_remote_async_create_inferior): Likewise.
	* win32-nat.c (win32_create_inferior): Likewise.
	* wince.c (child_create_inferior): Likewise.

	* monitor.c (monitor_create_inferior): Don't call proceed.
	Set the PC manually.
	* ocd.c (ocd_create_inferior): Likewise.
	* remote-e7000.c (e7000_create_inferior): Likewise.
	* remote-m32r-sdi.c (m32r_create_inferior): Likewise.
	* remote-mips.c (mips_create_inferior): Likewise.
	* remote-rdp.c (remote_rdp_create_inferior): Likewise.
	* remote-sds.c (sds_create_inferior): Likewise.
	* remote-st.c (st2000_create_inferior): Likewise.

	* inf-ptrace.c (inf_ptrace_create_inferior): Don't call
	proceed or observer_notify_inferior_created.
	* inf-ttrace.c (inf_ttrace_create_inferior): Likewise.
	* inftarg.c (child_create_inferior): Likewise.
2006-01-24 22:09:28 +00:00
Daniel Jacobowitz
cfd77fa13e * remote-fileio.c (remote_fileio_return_success): Take a gdb_byte
argument.
	(remote_fileio_func_open, remote_fileio_func_rename)
	(remote_fileio_func_unlink, remote_fileio_func_stat)
	(remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
	(remote_fileio_func_system): Cast the arguments to
	remote_read_bytes and remote_write_bytes.
	(remote_fileio_func_read, remote_fileio_func_write): Use a
	gdb_byte buffer.
	* remote.h (remote_read_bytes, remote_write_bytes): Update
	prototypes.
	* remote.c (hex2bin, bin2hex): Use gdb_byte for the BIN argument.
	(threadref_to_int): Replace bogus char * cast.
	(remote_unpack_thread_info_response): Use int for tag.
	(remote_threads_extra_info, remote_check_symbols): Cast string
	arguments to hex2bin.
	(remote_wait): Use a char buffer for packets and a gdb_byte
	buffer for registers.
	(remote_async_wait): Likewise.
	(remote_prepare_to_store, store_register_using_P)
	(remote_store_registers): Use gdb_byte buffers.
	(remote_write_bytes, remote_read_bytes): Use a gdb_byte pointer
	for MYADDR and char buffers for strings.
	(remote_xfer_partial): Add casts for string operations on READBUF.
	(remote_rcmd): Cast strings passed to bin2hex.
2006-01-17 14:11:16 +00:00
Mark Kettenis
24b0621974 * remote.c (get_memory_packet_size, set_thread)
(remote_unpack_thread_info_response, remote_get_threadinfo)
(parse_threadlist_response, remote_get_threadlist)
(remote_current_thread, remote_threads_info)
(remote_threads_extra_info, extended_remote_restart, get_offsets)
(remote_check_symbols, remote_open_1, remote_detach)
(remote_async_wait, remote_fetch_registers)
(remote_store_registers, check_binary_download, putpkt_binary)
(remote_insert_breakpoint, remote_insert_watchpoint)
(remote_remove_watchpoint, remote_insert_hw_breakpoint)
(remote_remove_hw_breakpoint, remote_xfer_partial, remote_rcmd)
(packet_command): Remove redundant parenthesis.
2006-01-11 22:03:59 +00:00
Eli Zaretskii
197e01b6dc * breakpoint.c:
* arm-tdep.c:
	* ia64-tdep.c:
	* i386-tdep.c:
	* hpread.c:
	* hppa-tdep.c:
	* hppa-hpux-tdep.c:
	* gnu-nat.c:
	* gdbtypes.c:
	* gdbarch.h:
	* gdbarch.c:
	* eval.c:
	* dwarf2read.c:
	* dbxread.c:
	* copying:
	* symfile.c:
	* stabsread.c:
	* sh64-tdep.c:
	* sh-tdep.c:
	* s390-tdep.c:
	* rs6000-tdep.c:
	* remote.c:
	* remote-mips.c:
	* mips-tdep.c:
	* mdebugread.c:
	* linux-nat.c:
	* infrun.c:
	* xcoffread.c:
	* win32-nat.c:
	* valops.c:
	* utils.c:
	* tracepoint.c:
	* target.c:
	* symtab.c:
	* c-exp.y:
	* ada-valprint.c:
	* ada-typeprint.c:
	* ada-lex.l:
	* ada-lang.h:
	* ada-lang.c:
	* ada-exp.y:
	* alphafbsd-tdep.c:
	* alphabsd-tdep.h:
	* alphabsd-tdep.c:
	* alphabsd-nat.c:
	* alpha-tdep.h:
	* alpha-tdep.c:
	* alpha-osf1-tdep.c:
	* alpha-nat.c:
	* alpha-mdebug-tdep.c:
	* alpha-linux-tdep.c:
	* alpha-linux-nat.c:
	* aix-thread.c:
	* abug-rom.c:
	* arch-utils.c:
	* annotate.h:
	* annotate.c:
	* amd64obsd-tdep.c:
	* amd64obsd-nat.c:
	* amd64nbsd-tdep.c:
	* amd64nbsd-nat.c:
	* amd64fbsd-tdep.c:
	* amd64fbsd-nat.c:
	* amd64bsd-nat.c:
	* amd64-tdep.h:
	* amd64-tdep.c:
	* amd64-sol2-tdep.c:
	* amd64-nat.h:
	* amd64-nat.c:
	* amd64-linux-tdep.c:
	* amd64-linux-nat.c:
	* alphanbsd-tdep.c:
	* block.h:
	* block.c:
	* bfd-target.h:
	* bfd-target.c:
	* bcache.h:
	* bcache.c:
	* ax.h:
	* ax-general.c:
	* ax-gdb.h:
	* ax-gdb.c:
	* avr-tdep.c:
	* auxv.h:
	* auxv.c:
	* armnbsd-tdep.c:
	* armnbsd-nat.c:
	* arm-tdep.h:
	* arm-linux-nat.c:
	* arch-utils.h:
	* charset.c:
	* call-cmds.h:
	* c-valprint.c:
	* c-typeprint.c:
	* c-lang.h:
	* c-lang.c:
	* buildsym.h:
	* buildsym.c:
	* bsd-uthread.h:
	* bsd-uthread.c:
	* bsd-kvm.h:
	* bsd-kvm.c:
	* breakpoint.h:
	* core-regset.c:
	* core-aout.c:
	* completer.h:
	* completer.c:
	* complaints.h:
	* complaints.c:
	* command.h:
	* coffread.c:
	* coff-solib.h:
	* coff-solib.c:
	* coff-pe-read.h:
	* coff-pe-read.c:
	* cli-out.h:
	* cli-out.c:
	* charset.h:
	* dink32-rom.c:
	* dictionary.h:
	* dictionary.c:
	* demangle.c:
	* defs.h:
	* dcache.h:
	* dcache.c:
	* d10v-tdep.c:
	* cpu32bug-rom.c:
	* cp-valprint.c:
	* cp-support.h:
	* cp-support.c:
	* cp-namespace.c:
	* cp-abi.h:
	* cp-abi.c:
	* corelow.c:
	* corefile.c:
	* environ.c:
	* elfread.c:
	* dwarfread.c:
	* dwarf2loc.c:
	* dwarf2expr.h:
	* dwarf2expr.c:
	* dwarf2-frame.h:
	* dwarf2-frame.c:
	* dve3900-rom.c:
	* dummy-frame.h:
	* dummy-frame.c:
	* dsrec.c:
	* doublest.h:
	* doublest.c:
	* disasm.h:
	* disasm.c:
	* fork-child.c:
	* findvar.c:
	* fbsd-nat.h:
	* fbsd-nat.c:
	* f-valprint.c:
	* f-typeprint.c:
	* f-lang.h:
	* f-lang.c:
	* expression.h:
	* expprint.c:
	* exec.h:
	* exec.c:
	* exceptions.h:
	* exceptions.c:
	* event-top.h:
	* event-top.c:
	* event-loop.h:
	* event-loop.c:
	* gdb.c:
	* gdb-stabs.h:
	* gdb-events.h:
	* gdb-events.c:
	* gcore.c:
	* frv-tdep.h:
	* frv-tdep.c:
	* frv-linux-tdep.c:
	* frame.h:
	* frame.c:
	* frame-unwind.h:
	* frame-unwind.c:
	* frame-base.h:
	* frame-base.c:
	* gdb_vfork.h:
	* gdb_thread_db.h:
	* gdb_string.h:
	* gdb_stat.h:
	* gdb_regex.h:
	* gdb_ptrace.h:
	* gdb_proc_service.h:
	* gdb_obstack.h:
	* gdb_locale.h:
	* gdb_dirent.h:
	* gdb_curses.h:
	* gdb_assert.h:
	* gdbarch.sh:
	* gdb.h:
	* hpux-thread.c:
	* hppabsd-nat.c:
	* hppa-tdep.h:
	* hpacc-abi.c:
	* h8300-tdep.c:
	* gregset.h:
	* go32-nat.c:
	* gnu-v3-abi.c:
	* gnu-v2-abi.h:
	* gnu-v2-abi.c:
	* gnu-nat.h:
	* glibc-tdep.c:
	* gdbtypes.h:
	* gdbcore.h:
	* gdbcmd.h:
	* i386nbsd-tdep.c:
	* i386nbsd-nat.c:
	* i386gnu-tdep.c:
	* i386gnu-nat.c:
	* i386fbsd-tdep.c:
	* i386fbsd-nat.c:
	* i386bsd-tdep.c:
	* i386bsd-nat.h:
	* i386bsd-nat.c:
	* i386-tdep.h:
	* i386-sol2-nat.c:
	* i386-nto-tdep.c:
	* i386-nat.c:
	* i386-linux-tdep.h:
	* i386-linux-tdep.c:
	* i386-linux-nat.c:
	* i386-cygwin-tdep.c:
	* inf-ttrace.c:
	* inf-ptrace.h:
	* inf-ptrace.c:
	* inf-loop.h:
	* inf-loop.c:
	* inf-child.h:
	* inf-child.c:
	* ia64-tdep.h:
	* ia64-linux-nat.c:
	* i387-tdep.h:
	* i387-tdep.c:
	* i386v4-nat.c:
	* i386v-nat.c:
	* i386obsd-tdep.c:
	* i386obsd-nat.c:
	* kod.c:
	* jv-valprint.c:
	* jv-typeprint.c:
	* jv-lang.h:
	* jv-lang.c:
	* irix5-nat.c:
	* iq2000-tdep.c:
	* interps.h:
	* interps.c:
	* inftarg.c:
	* inflow.h:
	* inflow.c:
	* inferior.h:
	* infcmd.c:
	* infcall.h:
	* infcall.c:
	* inf-ttrace.h:
	* m32r-tdep.h:
	* m32r-tdep.c:
	* m32r-rom.c:
	* m32r-linux-tdep.c:
	* m32r-linux-nat.c:
	* m2-valprint.c:
	* m2-typeprint.c:
	* m2-lang.h:
	* m2-lang.c:
	* lynx-nat.c:
	* linux-thread-db.c:
	* linux-nat.h:
	* linespec.c:
	* libunwind-frame.h:
	* libunwind-frame.c:
	* language.h:
	* language.c:
	* macroexp.c:
	* macrocmd.c:
	* m88kbsd-nat.c:
	* m88k-tdep.h:
	* m88k-tdep.c:
	* m68klinux-tdep.c:
	* m68klinux-nat.c:
	* m68kbsd-tdep.c:
	* m68kbsd-nat.c:
	* m68k-tdep.h:
	* m68k-tdep.c:
	* mips-linux-nat.c:
	* mips-irix-tdep.c:
	* minsyms.c:
	* memattr.h:
	* memattr.c:
	* mem-break.c:
	* mdebugread.h:
	* main.h:
	* main.c:
	* macrotab.h:
	* macrotab.c:
	* macroscope.h:
	* macroscope.c:
	* macroexp.h:
	* nbsd-tdep.c:
	* mt-tdep.c:
	* monitor.h:
	* monitor.c:
	* mn10300-tdep.h:
	* mn10300-tdep.c:
	* mn10300-linux-tdep.c:
	* mipsv4-nat.c:
	* mipsread.c:
	* mipsnbsd-tdep.h:
	* mipsnbsd-tdep.c:
	* mipsnbsd-nat.c:
	* mips64obsd-tdep.c:
	* mips64obsd-nat.c:
	* mips-tdep.h:
	* mips-mdebug-tdep.c:
	* mips-linux-tdep.c:
	* osabi.h:
	* osabi.c:
	* ocd.h:
	* ocd.c:
	* observer.c:
	* objfiles.h:
	* objfiles.c:
	* objc-lang.h:
	* objc-lang.c:
	* objc-exp.y:
	* nto-tdep.h:
	* nto-tdep.c:
	* nto-procfs.c:
	* nlmread.c:
	* nbsd-tdep.h:
	* ppcobsd-tdep.c:
	* ppcobsd-nat.c:
	* ppcnbsd-tdep.h:
	* ppcnbsd-tdep.c:
	* ppcnbsd-nat.c:
	* ppcbug-rom.c:
	* ppc-tdep.h:
	* ppc-sysv-tdep.c:
	* ppc-linux-tdep.c:
	* ppc-linux-nat.c:
	* ppc-bdm.c:
	* parser-defs.h:
	* parse.c:
	* p-valprint.c:
	* p-typeprint.c:
	* p-lang.h:
	* p-lang.c:
	* remote-fileio.h:
	* remote-fileio.c:
	* remote-est.c:
	* remote-e7000.c:
	* regset.h:
	* regset.c:
	* reggroups.h:
	* reggroups.c:
	* regcache.h:
	* regcache.c:
	* proc-why.c:
	* proc-service.c:
	* proc-events.c:
	* printcmd.c:
	* ppcobsd-tdep.h:
	* sentinel-frame.h:
	* sentinel-frame.c:
	* scm-valprint.c:
	* scm-tags.h:
	* scm-lang.h:
	* scm-lang.c:
	* scm-exp.c:
	* s390-tdep.h:
	* rom68k-rom.c:
	* remote.h:
	* remote-utils.c:
	* remote-st.c:
	* remote-sim.c:
	* remote-sds.c:
	* remote-rdp.c:
	* remote-rdi.c:
	* remote-hms.c:
	* sim-regno.h:
	* shnbsd-tdep.h:
	* shnbsd-tdep.c:
	* shnbsd-nat.c:
	* sh-tdep.h:
	* serial.h:
	* serial.c:
	* ser-unix.h:
	* ser-unix.c:
	* ser-tcp.c:
	* ser-pipe.c:
	* ser-go32.c:
	* ser-e7kpc.c:
	* ser-base.h:
	* ser-base.c:
	* solib.c:
	* solib-svr4.h:
	* solib-svr4.c:
	* solib-sunos.c:
	* solib-som.h:
	* solib-som.c:
	* solib-pa64.h:
	* solib-pa64.c:
	* solib-osf.c:
	* solib-null.c:
	* solib-legacy.c:
	* solib-irix.c:
	* solib-frv.c:
	* solib-aix5.c:
	* sol-thread.c:
	* sparc64-linux-tdep.c:
	* sparc64-linux-nat.c:
	* sparc-tdep.h:
	* sparc-tdep.c:
	* sparc-sol2-tdep.c:
	* sparc-sol2-nat.c:
	* sparc-nat.h:
	* sparc-nat.c:
	* sparc-linux-tdep.c:
	* sparc-linux-nat.c:
	* source.h:
	* source.c:
	* somread.c:
	* solist.h:
	* solib.h:
	* std-regs.c:
	* stack.h:
	* stack.c:
	* stabsread.h:
	* sparcobsd-tdep.c:
	* sparcnbsd-tdep.c:
	* sparcnbsd-nat.c:
	* sparc64obsd-tdep.c:
	* sparc64nbsd-tdep.c:
	* sparc64nbsd-nat.c:
	* sparc64fbsd-tdep.c:
	* sparc64fbsd-nat.c:
	* sparc64-tdep.h:
	* sparc64-tdep.c:
	* sparc64-sol2-tdep.c:
	* sparc64-nat.c:
	* ui-file.c:
	* typeprint.h:
	* typeprint.c:
	* tramp-frame.h:
	* tramp-frame.c:
	* trad-frame.h:
	* trad-frame.c:
	* tracepoint.h:
	* top.c:
	* tobs.inc:
	* thread.c:
	* terminal.h:
	* target.h:
	* symfile.h:
	* stop-gdb.c:
	* vaxbsd-nat.c:
	* vax-tdep.h:
	* vax-tdep.c:
	* vax-nat.c:
	* varobj.h:
	* varobj.c:
	* value.h:
	* value.c:
	* valprint.h:
	* valprint.c:
	* v850-tdep.c:
	* uw-thread.c:
	* user-regs.c:
	* ui-out.h:
	* ui-out.c:
	* ui-file.h:
	* xcoffsolib.h:
	* xcoffsolib.c:
	* wrapper.c:
	* wince.c:
	* wince-stub.h:
	* wince-stub.c:
	* vaxobsd-tdep.c:
	* vaxnbsd-tdep.c:
	* gdb_gcore.sh:
	* copying.c:
	* configure.ac:
	* aclocal.m4:
	* acinclude.m4:
	* reply_mig_hack.awk:
	* observer.sh:
	* gdb_mbuild.sh:
	* arm-linux-tdep.c:
	* blockframe.c:
	* dbug-rom.c:
	* environ.h:
	* dwarf2loc.h:
	* gdb-events.sh:
	* glibc-tdep.h:
	* gdb_wait.h:
	* gdbthread.h:
	* i386-sol2-tdep.c:
	* hppabsd-tdep.c:
	* hppa-linux-nat.c:
	* hppa-hpux-nat.c:
	* ia64-linux-tdep.c:
	* infptrace.c:
	* linespec.h:
	* maint.c:
	* mips-mdebug-tdep.h:
	* remote-m32r-sdi.c:
	* s390-nat.c:
	* rs6000-nat.c:
	* remote-utils.h:
	* sh3-rom.c:
	* sh-linux-tdep.c:
	* top.h:
	* symtab.h:
	* symmisc.c:
	* symfile-mem.c:
	* srec.h:
	* user-regs.h:
	* version.h:
	* valarith.c:
	* xstormy16-tdep.c:
	* wrapper.h:
	* Makefile.in:
	* f-exp.y:
	* cris-tdep.c:
	* cp-name-parser.y:
	* procfs.c:
	* proc-utils.h:
	* proc-flags.c:
	* proc-api.c:
	* p-exp.y:
	* m68hc11-tdep.c:
	* m2-exp.y:
	* kod.h:
	* kod-cisco.c:
	* jv-exp.y:
	* hppa-linux-tdep.c: Add (c) after Copyright.  Update the FSF
	address.
2005-12-17 22:34:03 +00:00
Wu Zhou
6c76e4a1c9 * remote.c (remote_pid_to_str): Use xsnprintf instead of snprintf. 2005-07-20 02:56:43 +00:00
Mark Kettenis
c8d511af85 * remote.c (extended_remote_restart): Pass buffer in call to
xsnprintf instead of a pointer to the buffer.
2005-06-22 11:42:54 +00:00
Wu Zhou
ecbc58df51 * remote.c (set_thread, remote_thread_alive): Replace sprintf
call with xsnprintf.
	(remote_threads_extra_info, extended_remote_restart)
	(remote_check_symbols, store_register_using_P)
	(compare_sections_command): Ditto.
2005-06-17 03:42:24 +00:00
Daniel Jacobowitz
cedea75781 From Wu Zhou <woodzltc@cn.ibm.com>:
* remote.c (struct gdb_ext_thread_info): Fix a comment typo.
	(remote_unpack_thread_info_response): Likewise.
2005-05-28 18:57:13 +00:00
Daniel Jacobowitz
c6826062e5 * dwarf2-frame.c (dwarf2_frame_prev_register): Use gdb_byte.
* i386-linux-nat.c (fetch_register, store_register, supply_gregset)
	(fill_gregset): Likewise.
	* i386-tdep.c (i386_frame_prev_register)
	(i386_sigtramp_frame_prev_register): Likewise.
	* linux-nat.c (linux_nat_xfer_memory, linux_nat_make_corefile_notes):
	Likewise.
	* linux-thread-db.c (thread_db_xfer_memory): Likewise.
	* remote.c (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint):
	Likewise.
	* target.c (debug_to_insert_hw_breakpoint)
	(debug_to_remove_hw_breakpoint, update_current_target): Likewise.
2005-05-28 16:44:29 +00:00
Mark Kettenis
961cb7b5cc * corelow.c (core_xfer_partial): Change type of readbuf and
writebuf to `gdb_byte *'.
* sparc-nat.c (sparc_xfer_wcookie, sparc_xfer_partial): Change
type of readbuf and writebuf to `gdb_byte *'.
* bsd-uthread.c (bsd_uthread_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* inf-ptrace.c (inf_ptrace_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* bsd-kvm.c (bsd_kvm_xfer_memory): Replace.
(bsd_kvm_xfer_partial): New function.
(bsd_kvm_add_target): Set to_xfer_partial instead of
to_xfer_memory.
* bfd-target.c (target_bfd_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* target.c (deprecated_debug_xfer_memory): Remove prototype.
(deprecated_debug_xfer_memory): Change type of second argument to
`gdb_byte *'.
* remote.c (remote_xfer_memory): Remove prototype.
(remote_xfer_memory): Change type of second argument to `gdb_byte
*'.
(remote_xfer_partial): Change type of readbuf and writebuf to
`gdb_byte *'.
2005-05-16 16:36:24 +00:00
Mark Kettenis
a77053c217 * solib.h (CLEAR_SOLIB, SOLIB_ADD)
(SOLIB_CREATE_INFERIOR_HOOK, SOLIB_REMOVE_INFERIOR_HOOK)
(SOLIB_IN_DYNAMIC_LINKER, SOLIB_RESTART)
(DISABLE_UNSETTABLE_BREAK, PC_SOLIB)
(IN_SOLIB_DYNSYM_RESOLVE_CODE): Remove defines and orphaned
comments.
* breakpoint.c: Include "solib.h".
(insert_bp_location) [!DISABLE_UNSETTABLE_BREAK]: Call
solib_address.
(remove_solib_event_breakpoints, create_solib_event_breakpoint)
(disable_breakpoints_in_shlibs)
(disable_breakpoints_in_unloaded_shlib)
(re_enable_breakpoints_in_shlibs): Compile if SOLIB_ADD isn't
defined. If PC_SOLIB isn't defined, call solib_address.
(_initialize_breakpoint): Unconditionally install observer.
* corelow.c: Include "solib.h".
[SOLIB_ADD] (solib_add_stub): Remove prototype.
(core_close) [!CLEAR_SOLIB]: Call clear_solib.
(solib_add_stub) [!SOLIB_ADD] Call solib_add.
(core_open): Unconditionally call solib_add_stub.
* fork-child.c: Include "solib.h".
(fork_inferior) [!SOLIB_CREATE_INFERIOR_HOOK]: Call
solib_create_inferior_hook.
* infcmd.c: Include "solib.h".
(attach_command) [!SOLIB_ADD]: Call shlib_rescan.  Unconditionally
call re_enable_breakpoints_in_shlibs.
* infrun.c: Include "solib.h".
(SOLIB_IN_SYNSYM_RESOLVE_CODE): Don't define if not already
defined.
(stop_on_solib_events, show_stop_on_solib_events): Include
unconditionally.
(follow_exec) [!SOLIB_CREATE_INFERIOR_HOOK]: Call
solib_create_inferior_hook.
(handle_inferior_event) [!SOLIB_ADD]: Call shlib_add.
[!IN_SOLIB_DYNSYM_RESOLVE_CODE]: Call in_solib_dynsym_resolve_code.
(_initialize_infrun): Unconditionally add "stop_on_solib-events"
command.
* remote.c: Include "solib.h".
(remote_open_1): Unconditionally call no_shared_libraries.
[!SOLIB_CREATE_INFERIOR_HOOK] Call solib_create_inferior_hook.
* stack.c: Include "solib.h".
(print_frame) [!PC_SOLIB] Call shlib_for_pc.
* xcoffsolib.c (no_shared_libraries): Remove function.
* Makefile.in (SFILES): Add solib.c.
(ALLDEPFILES): Remove solib.c.
(COMMON_OBS): Add solib.o.
(breakpoint.o, corelow.o, fork-chiled.o, infcmd.o, infrun.o)
(remote.o, stack.o): Update dependencies.
2005-05-12 20:21:18 +00:00