... following Pedro's advice of using a temporary macro.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Define a temporary
macro and use it to simplify this function's implementation.
This is not strictly needed, since both GDB and GDBserver seem
to agree on the register numbering without this. But this allows
us to make sure that this is always going to be the case.
gdb/gdbserver/ChangeLog:
* configure.srv (i[34567]86-*-lynxos*): Set srv_xmlfiles.
... back to GDB. The transfer occurs when GDB sends the
'qXfer:features:read:target.xml' packet. This allows us to make
sure that GDB and GDBserver use the same register numbering.
This is important on Lynx 178, where GDB selects the rs6000:6000
architecture by default instead of the powerpc:common architecture.
gdb/gdbserver/ChangeLog:
* configure.srv (powerpc-*-lynxos*): Set srv_xmlfiles.
Before this patch, the ptid passed to lynx_resume was completely
ignored, and we used the current_inferior. This resulted in trying
to resume the inferior execution using the wrong ptid after having
received a thread create/exit event, because the inferior_ptid
was still set to the ptid prior to receiving the signal.
gdb/gdbserver/ChangeLog:
* lynx-low.c (lynx_resume): Use the resume_info parameter
to determine the ptid for the lynx_ptrace call, unless
it is equal to minus_one_ptid, in which case we use the
ptid of the current_inferior.
(lynx_wait_1): After having received a thread create/exit
event, resume the inferior's execution using the signaling
thread's ptid, rather than the old ptid.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
We use this ptrace request when handling SIGTRAP signals,
and without this change, the debug trances show:
PTRACE (<unknown-request>, ...
This patch fixes this.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Add handling for
PTRACE_GETTRACESIG.
LynxOS 178 does not define this macro.
gdb/gdbserver/ChangeLog:
* lynx-low.c (ptrace_request_to_str): Do not handle
PTRACE_GETTHREADLIST if this macro does not exist.
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
Pedro Alves <palves@redhat.com>
* common/linux-osdata.c (linux_xfer_osdata_fds): Decrease buffer
size parameter passed to readlink by one byte.
* fbsd-nat.c (fbsd_pid_to_exec_file): Ditto.
* linux-nat.c (linux_child_pid_to_exec_file): Ditto.
* nbsd-nat.c (nbsd_pid_to_exec_file): Ditto.
* inf-child.c (inf_child_fileio_readlink): Decrease local buffer's
size by one byte.
gdb/gdbserver/
2012-11-26 Maxime Villard <rustyBSD@gmx.fr>
* hostio.c (handle_readlink): Decrease buffer size
parameter passed to readlink by one byte.
ARI fixes: move gdb_wait and gdb_stat headers to common subdirectory.
* gdb_stat.h: Delete. Moved to common directory.
* common/gdb_stat.h: New file.
* gdb_wait.h: Delete. Moved to common directory.
* common/gdb_wait.h: New file.
* Makefile.in (H_FILES_NO_SRC): Adapt to new header
location.
* contrib/ari/gdb_ari.sh (wait.h rule): Adapt to new gdb_wait.h
location.
(stat.h rule): Adapt to new gdb_stat.h location.
* common/linux-osdata.c: Include "gdb_stat.h" header instead of
<sys/stat.h> header.
* common/linux-ptrace.c: Include "gdb_wait.h" header instead of
<sys/wait.h> header.
gdbserver ChangeLog entry:
2012-11-15 Pierre Muller <muller@sourceware.org>
* configure.ac (AC_CHECK_HEADERS): Add wait.h header.
* config.in: Regenerate.
* configure: Regenerate.
* linux-low.c: Use "gdb_stat.h" header instead of <sys/stat.h> header.
Use "gdb_wait.h" header instead of <sys/wait.h> header.
* lynx-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
* remote-utils.c: Use "gdb_stat.h" header instead of <sys/stat.h>
header.
* server.c: Remove HAVE_WAIT_H conditional. Use "gdb_wait.h" header
instead of <sys/wait.h> header.
* spu-low.c: Use "gdb_wait.h" header instead of <sys/wait.h> header.
gdb/ChangeLog
* target.c (simple_search_memory): Include access length in
warning message.
gdb/gdbserver/ChangeLog
* server.c (handle_search_memory_1): Include access length in
warning message.
gdb/testsuite/ChangeLog
Test find command on unmapped memory.
* gdb.base/find-unmapped.c: New file.
* gdb.base/find-unmapped.exp: New file.
* common/gdb_string.h: ... here.
* common/vec.h: Remove #ifndef GDBSERVER conditional inclusion of
gdb_string.h and gdb_assert.h.
gdbserver/
* configure.ac: Add check for strstr.
* config.in: Regenerate.
* configure: Regenerate.
* linux-thread-db.c: #include "gdb_vecs.h".
(try_thread_db_load_from_pdir_1): New arg "subdir". All callers
updated.
(try_thread_db_load_from_pdir): New arg "subdir". All callers updated.
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
gdbserver/
* Makefile.in (SFILES): Add gdb_vecs.c.
(OBS): Add gdb_vecs.o.
(gdb_vecs_h, host_defs_h): New variables.
(thread-db.o): Add $(gdb_vecs_h) dependency.
(gdb_vecs.o): New rule.
* thread-db.c: #include "gdb_vecs.h".
(thread_db_load_search): Use a vector to iterate over path elements.
Handle text appearing after "$pdir".
* inf-child.c (inf_child_fileio_pwrite): If pwrite fails, fall back
to attempting lseek/write.
(inf_child_fileio_pread): Likewise for pread.
gdbserver/ChangeLog:
* hostio.c (handle_pread): If pread fails, fall back to attempting
lseek/read.
(handle_pwrite): Likewise for pwrite.
* linux-arm-low.c (arm_linux_hw_point_initialize): Distinguish
between unsupported TYPE and unimplementable ADDR/LEN combination.
(arm_insert_point): Act on new return value.
testsuite/ChangeLog:
* gdb.base/watchpoint.exp (test_wide_location_1): Expect software
watchpoints on ARM. When expecting software watchpoints, tolerate
(remote) targets that report unsupported hardware watchpoint only
at continue time.
(test_wide_location_2): Likewise.
* server.c (process_point_options): Only skip tokens if we find
one that is unrecognized. Don't treat 'X' specially while
skipping unrecognized tokens.
* arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Do not
attempt to 4-byte-align HW breakpoint addresses for Thumb.
gdbserver/ChangeLog:
* linux-arm-low.c (arm_linux_hw_point_initialize): Do not attempt
to 4-byte-align HW breakpoint addresses for Thumb.
* solib-svr4.c (svr4_current_sos): New comment on
svr4_current_sos_via_xfer_libraries fall back.
gdb/gdbserver/
* linux-low.c (linux_qxfer_libraries_svr4): Return -1 if R_DEBUG is -1.
gdb/testsuite/
* gdb.server/solib-list-lib.c: New file.
* gdb.server/solib-list-main.c: New file.
* gdb.server/solib-list.exp: New file.
