PR binutils/17531
* dwarf.c (display_debug_pubnames_worker): Use dwarf_vma type for
offset.
* readelf.c (dump_relocations): Handle printing offsets which are
MIN_INT.
(process_corefile_note_segment): Add range check of the namesz
field.
PR binutils/17531
* dwarf.c (process_debug_info): Zero the debug information array
since correct initialisation cannot be relied upon.
(process_cu_tu_index): Improve range checks.
PR binutils/17512
* dwarf.c (eh_addr_size): Use an unsigned type.
(size_of_encoded_value): Return an unsigned type.
(read_leb128): Break if the shift becomes too big.
(process_extended_line_op): Do not read the address if the length
is too long.
(read_cie): Warn and fail if the pointer size or segment size are
too big.
* dwarf.h (DWARF2_External_LineInfo): Delete unused and incorrect
structure definition.
(DWARF2_External_PubNames): Likewise.
(DWARF2_External_CompUnit): Likewise.
(DWARF2_External_ARange): Likewise.
(DWARF2_Internal_LineInfo): Use dwarf_vma type for
li_prologue_length.
(eh_addr_size): Update prototype.
* coffcode.h (styp_to_sec_flags): Use an unsigned long type to
hold the flag bits.
* peXXigen.c (pe_print_reloc): Use unsigned types to hold the
size and number of relocs.
(pe_print_debugdata): Use a 32-bit aligned buffer to store the
codeview record.
* versados.c (process_otr): Check the esdid value before using it
to access the EDATA.
DWARFv5 defines and GCC5 may output two new DW_LANG constants for the
Fortran 2003 and Fortran 2008 standards. Handle and display both in
binutils.
binutils/ChangeLog:
* dwarf.c (read_and_display_attr_value): Handle DW_LANG_Fortran03
and DW_LANG_Fortran08.
include/ChangeLog:
* dwarf2.h: Add DW_LANG_Fortran03 and DW_LANG_Fortran08.
http://dwarfstd.org/ShowIssue.php?issue=141121.1
PR binutils/17512
* dwarf.c (display_debug_frames): Fix range checks to work on
32-bit binaries complied on a 64-bit host.
* peXXigen.c (rsrc_print_resource_entries): Add range check for
addresses that wrap around the address space.
(rsrc_parse_entry): Likewise.
PR binutils/17531
* dwarf.c (read_and_display_attr_value): Test for a block length
being so long that it wraps around to before the start of the block.
(process_debug_info): Test for section_begin wrapping around to
before the start of the section.
(display_gdb_index): Test for num_cus being so large that the end
address wraps around to before the start of the section.
(process_cu_tu_index): Test for j being so large that the section
index pool wraps around to before the start of the section.
PR binutils/17531
* dwarf.c (process_debug_info): Add range check.
(display_debug_pubnames_worker): Likewise.
(display_gdb_index): Fix range check.
(process_cu_tu_index): Add range check.
* readelf.c (get_data): Change parameter types from size_t to
bfd_size_type. Add checks for loss of accuracy when casting from
bfd_size_type to size_t.
(get_dynamic_data): Likewise.
(process_section_groups): Limit number of error messages.
PR binutils/17512
* rcparse.y: Add checks to avoid integer divide by zero.
* rescoff.c (read_coff_rsrc): Add check on the size of the
resource section.
(read_coff_res_dir): Add check on the nesting level.
Check for resource names overrunning the buffer.
* resrc.c (write_rc_messagetable): Update formatting.
Add check of 'elen' being zero.
PR binutils/17512
* addr2line.c (slurp_symtab): If the symcount is zero, free the
symbol table pointer.
* dwarf2.c (concat_filename): Check for an empty directory table.
(scan_unit_for_symbols): Check for reading off the end of the
unit.
(parse_comp_unit): Check for a DW_AT_comp_dir attribute with a
non-string form.
* elf64-ppc.c (opd_entry_value): Fail if there are no relocs
available.
PR binutils/17512
* dlltool.c (identify_search_archive): If the last archive was the
same as the current archive, terminate the loop.
* pdp11.c (aout_get_external_symbols): Return false if there are
no symbols.
PR binutils/17512
* coffcode.h (coff_set_arch_mach_hook): Check return value from
bfd_malloc.
(coff_slurp_line_table): Return FALSE if the line number
information was corrupt.
(coff_slurp_symbol_table): Return FALSE if the symbol information
was corrupt.
* mach-o.c (bfd_mach_o_bfd_copy_private_header_data): Always
initialise the fields of the dyld_info structure.
(bfd_mach_o_build_exec_seg_command): Replace assertion with an
error message and a return value.
(bfd_mach_o_layout_commands): Change the function to boolean.
Return FALSE if the function fails.
(bfd_mach_o_build_commands): Fail if bfd_mach_o_layout_commands
fails.
(bfd_mach_o_read_command): Fail if an unrecognised command is
encountered.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Set bfd_error if the
read fails.
(slurp_symtab): Check the return from bfd_malloc.
(_bfd_XX_bfd_copy_private_bfd_data_common): Fail if the copy
encountered an error.
(_bfd_XXi_final_link_postscript): Fail if a section could not be
copied.
* peicode.h (pe_bfd_object_p): Fail if the header could not be
swapped in.
* tekhex.c (first_phase): Fail if the section is too big.
* versados.c (struct esdid): Add content_size field.
(process_otr): Use and check the new field.
(versados_get_section_contents): Check that the section exists and
that the requested data is available.
PR binutils/17512
* addr2line.c (main): Call bfd_set_error_program_name.
* ar.c (main): Likewise.
* coffdump.c (main): Likewise.
* cxxfilt.c (main): Likewise.
* dlltool.c (main): Likewise.
* nlmconv.c (main): Likewise.
* nm.c (main): Likewise.
* objdump.c (main): Likewise.
* size.c (main): Likewise.
* srconv.c (main): Likewise.
* strings.c (main): Likewise.
* sysdump.c (main): Likewise.
* windmc.c (main): Likewise.
* windres.c (main): Likewise.
* objcopy.c (main): Likewise.
(copy_relocations_in_section): Check for relocs without associated
symbol pointers.
abbrev_base is independent of abbrev_size. We should use abbrev_base +
abbrev_size to check abbrev section size.
* dwarf.c (process_debug_info): Properly check abbrev size.
PR binutils/17531
* dwarf.c (process_debug_info): Check for abbrev_base being larger
than the section size.
(process_cu_tu_index): Use xcalloc2 to allocate the CU and TU
arrays.
(xcalloc2): New function. Like xcalloc, but checks for overflow.
* dwarf.h (xcalloc2): Prototype.
The C standard doesn't guarantee a function pointer can be cast to
void* and vice versa.
binutils/
* prdbg.c (print_debugging_info): Don't use void* for function
pointer param.
* budbg.h (print_debugging_info): Update prototype.
gas/
* read.c (s_altmacro, s_reloc): Make definition static.
PR binutils/17512
* coffcode.h (coff_slurp_symbol_table): Return false if we failed
to load the line table.
* elf.c (_bfd_elf_map_sections_to_segments): Enforce a minimum
maxpagesize of 1.
* peXXigen.c (_bfd_XX_bfd_copy_private_bfd_data_common): Fail if
the Data Directory Size is too large.
* objcopy.c (copy_object): Free the symbol table if no symbols
could be loaded.
(copy_file): Use bfd_close_all_done to close files that could not
be copied.
PR binutils/17512
* sysdump.c (getINT): Fail if reading off the end of the buffer.
Replace call to abort with a call to fatal.
(getCHARS): Prevetn reading off the end of the buffer.
fuzzed binaries.
PR binutils/17512
* nlmconv.c (i386_mangle_relocs): Skip relocs without an
associated symbol.
(powerpc_mangle_relocs): Skip unrecognised relocs. Check address
range before applying a reloc.
PR binutils/17512
* objdump.c (display_any_bfd): Add a depth limit to nested archive
display in order to avoid infinite loops.
* srconv.c: Replace calls to abort with calls to fatal with an
error message.
PR binutils/17512
* coffdump.c (dump_coff_section): Check for a symbol being
available before printing its name.
(main): Check the return value from coff_grok.
* coffgrok.c: Reformat and tidy.
Add range checks to most functions.
(coff_grok): Return NULL if the input bfd is not in a COFF
format.
* coffgrok.h: Reformat and tidy.
(struct coff_section): Change the nrelocs field to unsigned.
* srconv.c (main): Check the return value from coff_grok.
* coff-i860.c (CALC_ADDEND): Always set an addend value.
* tekhex.c (getvalue): Add an end pointer parameter. Use it to
avoid reading off the end of the buffer.
(getsym): Likewise.
(first_phase): Likewise.
(pass_over): Pass an end pointer to the invoked function.
PR binutils/17512
* nm.c (print_symbol): Add 'is_synthetic' parameter. Use it to
help initialize the info.elfinfo field.
(print_size_symbols): Add 'synth_count' parameter. Use it to set
the is_synthetic parameter when calling print_symbol.
(print_symbols): Likewise.
(display_rel_file): Pass synth_count to printing function.
(display_archive): Break loop if the last archive displayed
matches the current archive.
* size.c (display_archive): Likewise.
* archive.c (do_slurp_bsd_armap): Make sure that the parsed sized
is at least big enough for the header to be read.
* elf32-i386.c (elf_i386_get_plt_sym_val): Skip unknown relocs.
* mach-o.c (bfd_mach_o_get_synthetic_symtab): Add range checks.
(bfd_mach_o_read_command): Prevetn duplicate error messages about
unrecognized commands.
* syms.c (_bfd_stab_section_find_nearest_line): Add range checks
when indexing into the string table.
PR binutils/17531
* dwarf.c (alloc_num_debug_info_entries): New variable.
(process_debug_info): Set it. Use it to avoid displaying
attributes for which there is no info.
(display_debug_abbrev): Check that the debug_info_entry index is
valid before using it.
(display_loc_list_dwo): Likewise.
(process_cu_tu_index): Add range check for an overlarge dw_sect
value.
(free_debug_memory): Reset alloc_num_debug_info_entries.
* readelf.c (slurp_ia64_unwind_table): Warn if the reloc could not
be indentified.
(dynamic_section_mips_val): Warn if the timestamp is invalid.
(print_mips_got_entry): Add a data_end parameter. Warn if a read
would go beyond the end of the data, and return an error value.
(process_mips_specific): Do not read options from beyond the end
of the section.
Correct code to display optional data at the end of an option.
Warn if there are too many GOT symbols.
Update calls to print_mips_got_entry, and handle error returns.
Since 2006, commit d270463e9, _bfd_elf_copy_private_section_data has
copied over SHF_MASKOS and SHF_MASKPROC flags. That makes the buggy
code in sh_elf64_copy_private_data_internal redundant.
bfd/
PR 17755
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Delete code
copying SHF_SH5_ISA32.
binutils/testsuite/
* binutils-all/strip-11.d: New test.
* binutils-all/objcopy.exp: Run it.
*** bfd/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Handle new
Tag_ABI_VFP_args value and replace hardcoded values by enum
values.
(elf32_arm_post_process_headers): Set e_flags in ELF header
as hard float only when Tag_ABI_VFP_args is 1, using new enum
value AEABI_VFP_args_vfp to check that.
*** binutils/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* readelf.c (arm_attr_tag_ABI_VFP_args): Add "compatible".
*** gdb/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm-tdep.c (arm_gdbarch_init): Explicitely handle value 3 of
Tag_ABI_VFP_args. Also replace hardcoded values by enum values
in the switch handling the different values of Tag_ABI_VFP_args.
*** gold/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm.cc (Target_arm::do_adjust_elf_header): Set e_flags in ELF
header as hard float only when Tag_ABI_VFP_args is 1, using new
enum value AEABI_VFP_args_vfp to check that.
(Target_arm::merge_object_attributes): Handle new Tag_ABI_VFP_args
value and replace hardcoded values by enum values.
*** include/elf/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* arm.h: New AEABI_FP_number_model_* and AEABI_VFP_args_* enum
values.
*** ld/testsuite/ChangeLog ***
2014-12-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
* ld-arm/attr-merge-2a.s: Add Tag_ABI_VFP_args.
* ld-arm/attr-merge-2b.s: Likewise.
* ld-arm/attr-merge-2.attr: Likewise.
* ld-arm/attr-merge-4a.s: Add Tag_ABI_FP_number_model and
Tag_ABI_VFP_args.
* ld-arm/attr-merge-4b.s: Likewise.
* ld-arm/attr-merge-4.attr: Likewise.
* ld-arm/attr-merge-6a.s: Likewise.
* ld-arm/attr-merge-6b.s: Likewise.
* ld-arm/attr-merge-6.attr: Add Tag_ABI_FP_number_model.
--enable-deterministic-archives and --disable-deteministic-archive
options were not being accepted.
PR binutils/17671
* objcopy.c (copy_main, strip_main): Add D and U to the list of
accepted short versions of long options.
PR binutils/17531
* dwarf.c (decode_location_expression): Check for an out of range
value for a DW_OP_GNU_entry_value expression.
(display_debug_lines_raw): Check for a partial
.debug_line. section being encountered without a prior, full
.debug.line section.
(display_debug_lines_decoded): Likewise. Also check for
li_line_range being zero.
(display_debug_pubnames_worker): Check for an invalid pn_length
field.
(read_cie): Add range checks.
* elfcomm.c (setup_archive): Check for a negative longnames_size.
Also fix a place where %lld was wrongly used to print a dwarf_vma.
* configure.ac: Check for long long and sizes of long long and long.
* elfcomm.h (HOST_WIDEST_INT): Test HAVE_LONG_LONG in place of
__STDC_VERSION__ and __GNUC__.
* strings.c (print_strings): Likewise.
* dwarf.c (DWARF_VMA_FMT, DWARF_VMA_FMT_LONG): Likewise.
(read_debug_line_header): Use dwarf_vmatoa to print warning.
* configure: Regenerate.
* config.in: Regenerate.
PR binutils/17512
* objdump.c (display_any_bfd): Avoid infinite loop closing and
opening the same archive again and again.
* archive64.c (bfd_elf64_archive_slurp_armap): Add range checks.
* libbfd.c (safe_read_leb128): New function.
* libbfd-in.h (safe_read_leb128): Add prototype.
* libbfd.h: Regenerate.
* elf-attrs.c (_bfd_elf_parse_attributes): Use safe_read_leb128.
Check for an over-long subsection length.
* elf.c (elf_parse_notes): Check that the namedata is long enough
for the string comparison that is about to be performed.
(elf_read_notes): Zero-terminate the note buffer.
PR binutils/17531
* dwarf.c (display_debug_frames): Check for a negative
augmentation data length.
(display_gdb_index): Check for invalid offsets.
* elfcomm.c (process_archive_index_and_symbols): Check for an
index number that overflows when multiplied by the ar index size.
* readelf.c (dump_ia64_unwind): Add range checks.
(slurp_ia64_unwind_table): Change to a boolean function. Add
range checks.
(process_version_sections): Add range checks.
(get_symbol_version_string): Add check for missing section
headers.
PR binutils/17512
* objdump.c (free_debug_section): Reset the compress_status as
well.
* compress.c (bfd_get_full_section_contents): Fail if there are no
section contents available when the compress_status is
COMPRESS_SECTION_DONE.
* libbfd.c (bfd_malloc): Refuse to allocate a negative size.
(bfd_malloc2): Use bfd_malloc.
(bfd_realloc): Refuse to reallocate a negative size.
(bfd_realloc2): Use bfd_realloc.
(bfd_realloc_or_free): Use bfd_realloc.
(bfd_zmalloc): Use bfd_malloc.
(bfd_zmalloc): Use bfd_malloc2.
* opncls.c (bfd_alloc): Refuse to allocate a negative size.
PR binutils/17512
* dwarf.h (struct dwarf_section): Add user_data field.
* dwarf.c (frame_need_space): Check for an over large register
number.
(display_debug_frames): Check the return value from
frame_need_space. Check for a CFA expression that is so long the
start address wraps around.
(debug_displays): Initialise the user_data field.
* objdump.c (load_specific_debug_section): Save the BFD section
pointer in the user_data field of the dwarf_section structure.
(free_debug_section): Update BFD section data when freeing section
contents.
* readelf.c (load_specific_debug_section): Initialise the
user_data field.
* archive.c (do_slurp_coff_armap): Add range checks to prevent
running off the end of the string table.
* compress.c (bfd_get_full_section_contents): Return a NULL
pointer for zero sized sections. Do not attempt to copy a buffer
onto itself.
* elf-attrs.c (_bfd_elf_parse_attributes): Check for an empty
header. Add range checks to avoid running off the end of the
section.
* elf.c (bfd_elf_get_str_section): Seek before allocating so that
if the seek fails, no memory is allocated.
(bfd_elf_string_from_elf_section): Do not allocate a string from a
non string section. It only leads to trouble later on.
(_bfd_elf_print_private_bfd_data): Check for there being too
little external dynamic data.
(bfd_section_from_shdr): Replace assertion with a failure mode.
(bfd_section_from_shdr): When walking a loaded group section use
the internal structure size, not the external size. Check for the
group section being empty.
* elf32-i386.c (elf_i386_rtype_to_howto): Replace assertion with a
failure mode.
* elfcode.h (elf_slurp_reloc_table): Likewise.
* reloc.c (bfd_perform_relocation): Avoid seg-fault if the howto
parameter is NULL.
PR binutils/17531
* dwarf.c (process_cu_tu_index): Check for an out of range row
index.
* elfcomm.c (adjust_relative_path): Change name_len parameter to
an unsigned long. Check for path length overflow.
(process_archive_index_and_symbols): Check for invalid header
size.
(setup_archive): Add checks for invalid archives.
(get_archive_member_name): Add range checks.
* elfcomm.h (adjust_relative_path): Update prototyoe.
* readelf.c (process_archive): Add range checks.
PR binutils/17531
* readelf.c (get_data): Move excessive length check to earlier on
in the function and allow for wraparound in the arithmetic.
(get_32bit_elf_symbols): Terminate early if the section size is
zero. Check for an invalid sh_entsize. Check for an index
section with an invalid size.
(get_64bit_elf_symbols): Likewise.
(process_section_groups): Check for an invalid sh_entsize.
PR binutils/17512
* dwarf.c (display_block): Do nothing if the block starts after
the end of the buffer.
(read_and_display_attr_value): Add range checks.
(struct Frame_Chunk): Make the ncols and ra fields unsigned.
(frame_need_space): Test for an ncols of zero.
(read_cie): Fail if the augmentation data extends off the end of
the buffer.
(display_debug_frames): Add checks for read_cie failing. Add
range checks.
* coff-h8300.c (rtype2howto): Replace abort with returning a NULL
value.
* coff-h8500.c (rtype2howto): Likewise.
* coff-tic30.c (rtype2howto): Likewise.
* coff-z80.c (rtype2howto): Likewise.
* coff-z8k.c (rtype2howto): Likewise.
* coff-ia64.c (RTYPE2HOWTO): Always return a valid howto.
* coff-m68k.c (m68k_rtype2howto): Return a NULL howto if none
could be found.
* coff-mcore.c (RTYPE2HOWTO): Add range checking.
* coff-w65.c (rtype2howto): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
* pe-mips.c (RTYPE2HOWTO): Likewise.
* coff-x86_64.c (coff_amd64_reloc): Likewise. Replace abort with
an error return.
* coffcode.h (coff_slurp_reloc_table): Allow the rel parameter to
be unused.
* coffgen.c (make_a_section_from_file): Check the length of a
section name before testing to see if it is a debug section name.
(coff_object_p): Zero out any uninitialised bytes in the opt
header.
* ecoff.c (_bfd_ecoff_slurp_symbolic_info): Test for the raw
source being empty when there are values to be processed.
(_bfd_ecoff_slurp_symbol_table): Add range check.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Likewise.
(bfd_mach_o_mangle_sections): Move test for too many sections to
before the allocation of the section table.
(bfd_mach_o_read_symtab_strtab): If the read fails, free the
memory and nullify the symbol pointer.
* reloc.c (bfd_generic_get_relocated_section_contents): Add
handling of a bfd_reloc_notsupported return value.
* versados.c (EDATA): Add range checking.
(get_record): Likewise.
(process_otr): Check for contents being available before updating
them.
(versados_canonicalize_reloc): Add range check.
Both readelf/objdump know how to get symbol version string for dynamic
symbols. This patch extracts this functionality into a separate
function and uses it to add symbol version string to versioned symbol
names when dumping dynamic relocations.
bfd/
PR binutils/16496
* elf-bfd.h (bfd_elf_get_symbol_version_string): New.
* elf.c (bfd_elf_get_symbol_version_string): New. Extracted
from bfd_elf_print_symbol.
(bfd_elf_print_symbol): Use it.
binutils/
PR binutils/16496
* objdump.c (objdump_print_symname): Call
bfd_elf_get_symbol_version_string to get ELF symbol version
string. Append version string if needed.
* readelf.c (versioned_symbol_info): New enum.
(get_symbol_version_string): New. Extracted from
process_symbol_table.
(dump_relocations): Add a new argument to indicate if dynamic
symbol table is used. Use get_symbol_version_string to get
symbol version string for dynamic symbol. Append version string
if needed.
(process_relocs): Updated dump_relocations call.
(process_symbol_table): Use get_symbol_version_string.
ld/testsuite/
PR binutils/16496
* ld-cris/weakref3.d: Add symbol version string to versioned
symbol names in dynamic relocation.
* ld-cris/weakref4.d: Likewise.
* ld-elfvers/vers24.rd: Likewise.
* ld-elf/pr16496a.c: New file.
* ld-elf/pr16496a.map: Likewise.
* ld-elf/pr16496b.c: Likewise.
* ld-elf/pr16496b.od: Likewise.
* ld-elf/shared.exp (build_tests): Add libpr16496a.so and
libpr16496b.so tests.
PR binutils/17512
* dwarf.c (get_encoded_value): Check for an encoded size of 0.
(display_debug_lines_raw): Check for an invalid line range value.
(display_debug_frames): Check for corrupt augmentation data.
* coffgen.c (coff_get_normalized_symtab): Check for an excessive
number of auxillary entries.
* ieee.c (next_byte): Convert to a function. Return FALSE if the
next byte is beyond the end of the buffer.
(parse_int): Test the return value of next_byte.
(parse_expression): Convert to boolean. Return FALSE if the
parsing failed. Test the return value of next_byte.
(ieee_seek): Convert to a function. Return FALSE if the seek goes
beyond the end of the buffer.
(ieee_slurp_external_symbols): Test the return value of ieee_seek
and next_byte.
(ieee_slurp_sections): Convert to boolean. Return FALSE if the
operation failed. Test the return value of ieee_seek and
next_byte.
(ieee_archive_p): Test the return value of ieee_seek and
next_byte.
(do_one): Likewise.
(ieee_slurp_section_data): Likewise.
(ieee_object_p): Likewise. Store the size of the buffer in the
total_amt field in the header.
* libieee.h (common_header_type): Add amt field.
* mach-o.c (bfd_mach_o_canonicalize_one_reloc): Check that the
reloc's value is within range.
(bfd_mach_o_read_symtab_symbols): Nullify the symbols field if the
operation fails.
* pei-x86_64.c (pex64_xdata_print_uwd_codes): Replace abort with
an error message.
(pex64_dump_xdata): Check for buffer overflows.
* versados.c (process_otr): Check that the section exists before
taking its size.
(versados_object_p): Make sure that enough data was read for the
header to be checked.
* vms-alpha.c (vms_get_remaining_object_record): Change
read_so_far parameter to an unsigned int. Check that the amount
read is in range.
This is the updated version using uintptr_t as Alan Modra suggested.
2014-11-18 Jan-Benedict Glaw <jbglaw@lug-owl.de>
* dwarf.c (process_extended_line_op): Fix signedness warning.
PR binutils/17512
* peXXIgen.c (pe_print_pdata): Fail if the section's virtual size
is larger than its real size.
(rsrc_print_section): Fix off-by-one error checking for overflow.
* pei-x86_64.c (pex64_bfd_print_pdata): Handle empty unwind
sections.
* dwarf.c (get_encoded_value): Warn and return if the encoded
value is more than 64-bits long.
(SAFE_BYTE_GET): Do not attempt to read more than 64-bits.
(process_extended_line_op): Add more range checks.
(decode_location_expression): Use the return value from
display_block. Add more range checks.
(read_debug_line_header): Add range check.
(display_debug_lines_raw): Add range checks.
(display_debug_frames): Silently skip multiple zero terminators.
Add range checks.
(process_cu_tu_index): Check for non-existant or empty sections.
Use SAFE_BYTE_GET instead of byte_get.
PR binutils/17531
* readelf.c (get_unwind_section_word): Skip reloc processing if
there are no relocs associated with the section.
(decode_tic6x_unwind_bytecode): Warn and return if the stack
pointer adjustment falls off the end of the buffer.
PR binutils/17512
* dwarf.c (get_encoded_value): Add an 'end' parameter. Change the
'data' parameter to a double pointer and return the updated value.
(decode_location_expression): Update call to get_encoded_value.
(frame_need_space): Handle the case where one or both of the
mallocs fails.
(read_cie): Initialise the cie pointer, even if the read fails.
(display_debug_frames): Warn if the calculated block_end is before
the start of the block. Break the loop if the CIE could not be
read. Update call to get_encoded_value. Warn if the read CFA
expressions are too big.
* ieee.c (ieee_archive_p) Skip processing if no bytes are read at
all.
(ieee_object_p): Likewise.
PR binutils/17531
* readelf.c (process_version_sections): If the read of the version
def information fails, make sure that the external verdef data is
not used.
(get_dynamic_data): Do not attempt to allocate memory for more
dynamic data than there is in the file. If the read fails, free
the allocated buffer.
(process_symbol_table): Do not print dynamic information if we
were unable to read the dynamic symbol table.
(print_gnu_note): Do not print the note if the descsz is too
small.
PR binutils/17512
* dwarf.c (read_and_display_attr_value): Check that we do not read
past end.
(display_debug_pubnames_worker): Add range checks.
(process_debug_info): Check for invalid pointer sizes.
(display_loc_list): Likewise.
(display_loc_list_dwo): Likewise.
(display_debug_ranges): Likewise.
(display_debug_aranges): Check for invalid address size.
(read_cie): Add range checks. Replace call strchr with while loop.
* objdump.c (dump_dwarf): Replace abort with a warning message.
(print_section_stabs): Improve range checks.
* rdcoff.c (coff_get_slot): Use long for indx parameter type.
Add check for an excesively large index.
* rddbg.c (read_section_stabs_debugging_info): Zero terminate the
string table. Avoid walking off the end of the stabs data.
* stabs.c (parse_stab_string): Add check for a NULL name.
PR binutils/17512
* coffcode.h (coff_slurp_line_table): Set the line number of
corrupt entries to -1.
(coff_slurp_symbol_table): Alway initialise the value of the
symbol.
* coffgen.c (coff_print_symbol): Check that the combined pointer
is valid.
(coff_print_symbol): Do not print negative line numbers.
* peXXigen.c (pe_print_idata): Add range checking displaying
member names.
PR binutils/17531
* binutils/readelf.c (dynamic_nent): Change type to size_t.
(slurp_rela_relocs): Use size_t type for nrelas.
(slurp_rel_relocs): Likewise.
(get_program_headers): Improve out of memory error message.
(get_32bit_section_headers): Likewise.
(get_32bit_section_headers): Likewise.
(get_64bit_section_headers): Likewise.
(get_32bit_elf_symbols): Likewise.
(get_64bit_elf_symbols): Likewise.
(process_section_groups): Likewise.
(get_32bit_dynamic_section): Likewise.
(get_64bit_dynamic_section): Likewise.
(process_dynamic_section): Likewise.
(process_version_sections): Likewise.
(get_symbol_index_type): Likewise.
(process_mips_specific): Likewise.
(process_corefile_note_segment): Likewise.
(process_version_sections): Use size_t type for total.
(get_dynamic_data): Change type of number parameter to size_t.
Improve out of memory error messages.
(process_symbol_table): Change type of nbuckets and nchains to
size_t. Skip processing of sections headers if there are none.
Improve out of memory error messages.
PR binutils/17531
* (ia64_process_unwind): Replace assertion with an error message.
Add range checking for group section indicies.
(hppa_process_unwind): Replace assertion with an error message.
(process_syminfo): Likewise.
(decode_arm_unwind_bytecode): Add range checking.
(dump_section_as_strings): Add more string range checking.
(display_tag_value): Likewise.
(display_arm_attribute): Likewise.
(display_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_msp430x_attribute): Likewise.
PR binutils/17531
* readelf.c (get_data): Avoid allocating memory when we know that
the read will fail.
(find_section_by_type): New function.
(get_unwind_section_word): Check for invalid symbol indicies.
Check for invalid reloc types.
(get_32bit_dynamic_section): Add range checks.
(get_64bit_dynamic_section): Add range checks.
(process_dynamic_section): Check for a corrupt time value.
(process_symbol_table): Add range checks.
(dump_section_as_strings): Add string length range checks.
(display_tag_value): Likewise.
(display_arm_attribute): Likewise.
(display_gnu_attribute): Likewise.
(display_tic6x_attribute): Likewise.
(display_msp430x_attribute): Likewise.
(process_mips_specific): Add range check.
PR binutils/17552, binutils/17533
* bucomm.c (is_valid_archive_path): New function. Returns false
for absolute pathnames and pathnames that include /../.
* bucomm.h (is_valid_archive_path): Add prototype.
* ar.c (extract_file): Use new function to check for valid
pathnames when extracting files from an archive.
* objcopy.c (copy_archive): Likewise.
* doc/binutils.texi: Update documentation to mention the
limitation on pathname of archive members.
PR binutils/15731
* readelf.c (printable_section_name): New function.
(printable_section_name_from_index): New function.
(dump_relocations): Use new function.
(process_program_headers, get_32bit_elf_symbols,
(get_64bit_elf_symbols, process_section_headers,
(process_section_groups, process_relocs, ia64_process_unwind,
(hppa_process_unwind, get_unwind_section_word, decode_arm_unwind,
(arm_process_unwind, process_version_sections,
(process_symbol_table, apply_relocations, get_section_contents,
(dump_section_as_strings, dump_section_as_bytes,
(display_debug_section, process_attributes, process_mips_specific,
(process_mips_specific process_gnu_liblist): Likewise.
(get_unwind_section_word): Check for a missing symbol table.
Replace aborts with error messages.
(arm_process_unwind): Check for a missing string table.
(process_attributes): Check for an attribute length that is too
small.
(process_mips_specific): Check for a corrupt GOT symbol offset.
PR binutils/17531
(get_32bit_program_headers): Verify program header entry size
before reading in the program headers.
(get_64bit_program_headers): Likewise.
(get_unwind_section_word): Do nothing if no section was provided.
Fail if the offset is outside of the section.
(print_dynamic_symbol): Catch out of range symbol indicies.
(process_mips_specific): Likewise.
(process_attributes): Make sure that there is enough space left in
the section before attempting to read the length of the next
attribute.
PR binutils/17531
* readelf.c (get_data): If the reason parameter is null, do not
print any error messages.
(get_32bit_section_headers): Verify section header entry size
before reading in the section headers.
(get_64bit_section_headers): Likewise.
(process_section_headers): Pass FALSE to get_section_headers.
(get_file_header): Pass TRUE to get_section_headers.
(process_dynamic_section): Change an assert to an error message.
(process_symbol_table): Handle corrupt histograms.
PR binutils/17512
* objdump.c (slurp_symtab): Fail gracefully if the table could not
be read.
(dump_relocs_in_section): Likewise.
* aoutx.h (slurp_symbol_table): Check that computed table size is
not bigger than the file from which is it being read.
(slurp_reloc_table): Likewise.
* coffcode.h (coff_slurp_line_table): Remove unneeded local
'warned'. Do not try to print the details of a symbol with an
invalid index.
* coffgen.c (make_a_sectiobn_from_file): Check computed string
index against length of string table.
(bfd_coff_internal_syment_name): Check read in string offset
against length of string table.
(build_debug_section): Return a pointer to the section used.
(_bfd_coff_read_string_table): Store the length of the string
table in the coff_tdata structure.
(bfd_coff_free_symbols): Set the length of the string table to
zero when it is freed.
(coff_get_normalized_symtab): Check offsets against string table
or data table lengths as appropriate.
* cofflink.c (_bfd_coff_link_input_bfd): Check offset against
length of string table.
* compress.c (bfd_get_full_section_contents): Check computed size
against the size of the file.
* libcoff-in.h (obj_coff_strings_len): Define.
(struct coff_tdata): Add strings_len field.
* libcoff.h: Regenerate.
* peXXigen.c (pe_print_debugdata): Do not attempt to print the
data if the debug section is too small.
* xcofflink.c (xcoff_link_input_bfd): Check offset against
length of string table.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
PR binutils/17512
* coffgen.c (_bfd_coff_get_external_symbols): Do not try to load a
symbol table bigger than the file.
* elf.c (bfd_elf_get_str_section): Do not try to load a string
table bigger than the file.
* readelf.c (process_program_headers): Avoid memory exhaustion due
to corrupt values in a dynamis segment header.
(get_32bit_elf_symbols): Do not attempt to read an over-large
section.
(get_64bit_elf_symbols): Likewise.
--all option which displays text from anywhere in the input file(s). The
default used to be --data, which only displays text from loadable data sections,
but this requires the use of the BFD library. Since the BFD library almost
certainly still contains buffer overrun and/or memory corruption bugs, and
since the strings program is often used to examine malicious code, it was
decided that the --data option option represents a possible security risk.
* strings.c: Add new command line option --data to only scan the
initialized, loadable data secions of binaries. Choose the
default behaviour of --all or --data based upon a configure
option.
* doc/binutils.texi (strings): Update documentation. Include
description of why the --data option might be unsafe.
* configure.ac: Add new option --disable-default-strings-all which
restores the old behaviour of strings using --data by default. If
the option is not used make strings use --all by default.
* NEWS: Mention the new behaviour of strings.
* configure: Regenerate.
* config.in: Regenerate.
bfd/
* elfxx-mips.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
binutils/
* readelf.c (print_mips_ases): Print unknown ASEs.
(print_mips_isa_ext): Print the value of an unknown extension.
include/
* elf/mips.h (AFL_ASE_MASK): Define.
%<number>s as an fscanf format does not include the trailing NULL.
PATH_MAX does include the trailing NULL.
PR 17453
* readelf.c (process_program_headers): Correct fscanf format used
for interpreter.
The linker side of pr16563 was fixed with commit 18cd5bce, but
unfortunately people continue to use older linkers with -flto. This
means we have binaries with working .eh_frame that can't be dumped by
readelf, and I'm seeing internal IBM bug reports about this fact.
PR 16563
* dwarf.c (GET): Remove semicolon.
(read_cie): New function, extracted from..
(display_debug_frames): ..here. Correctly handle signed offset
from FDE to CIE in .eh_frame. Decode forward referenced CIEs too.
different architecture tags. Add a test case to make sure that this works,
and update readelf so that it will not seg-fault when trying to display the
attributes of binaries with invalid architecture tags.
* elf32-arm.c (elf32_arm_merge_eabi_attributes): Return false if
failed to merge.
* ld-arm/attr-merge-arch-2.d: New test case.
* ld-arm/attr-merge-arch-2a.s: New test case source file.
* ld-arm/attr-merge-arch-2b.s: Likewise.
* ld-arm/arm-elf.exp: Run new test case.
* readelf.c (display_arm_attribute): Use unsigned int type for
tag, val and type variables.
First, add nds32 audio ISA extension including opcodes and registers.
Second, redesign the disassemble implement.
The original disassemble decode instruction opcode using switch-case.
It is hard to synchronize when adding new instructions.
Therefore, the new implement reuses nds32_opcodes to dump the instructions.
bfd/
* aoutx.h (NAME (aout, machine_type)): Add mips32r6 and mips64r6.
* archures.c (bfd_architecture): Likewise.
* bfd-in2.h (bfd_architecture): Likewise.
(bfd_reloc_code_real): Add relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
* cpu-mips.c (arch_info_struct): Add mips32r6 and mips64r6.
* elf32-mips.c: Define relocs R_MIPS_PC21_S2, R_MIPS_PC26_S2
R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elf64-mips.c: Define REL, and RELA relocations R_MIPS_PC21_S2,
R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2, R_MIPS_PCHI16
and R_MIPS_PCLO16.
(mips_reloc_map): Add entries for BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (MIPSR6_P): New define.
(mipsr6_exec_plt_entry): New array.
(hi16_reloc_p): Add support for R_MIPS_PCHI16.
(lo16_reloc_p): Add support for R_MIPS_PCLO16.
(aligned_pcrel_reloc_p): New function.
(mips_elf_relocation_needs_la25_stub): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(mips_elf_calculate_relocation): Add support for relocs:
R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3, R_MIPS_PC19_S2,
R_MIPS_PCHI16 and R_MIPS_PCLO16.
(_bfd_elf_mips_mach): Add support for mips32r6 and mips64r6.
(mips_elf_add_lo16_rel_addend): Add support for R_MIPS_PCHI16.
(_bfd_mips_elf_check_relocs): Add support for relocs:
R_MIPS_PC21_S2 and R_MIPS_PC26_S2.
(_bfd_mips_elf_relocate_section): Add a check for unaligned
pc relative relocs.
(_bfd_mips_elf_finish_dynamic_symbol): Add support for MIPS r6
plt entry.
(mips_set_isa_flags): Add support for mips32r6 and mips64r6.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
(mips_32bit_flags_p): Add support for mips32r6.
* libbfd.h (bfd_reloc_code_real_names): Add entries for
BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2,
BFD_RELOC_MIPS_18_PCREL_S3 and BFD_RELOC_MIPS_19_PCREL_S2.
* reloc.c: Document relocs BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3 and
BFD_RELOC_MIPS_19_PCREL_S2.
binutils/
* readelf.c (get_machine_flags): Add support for mips32r6 and
mips64r6.
elfcpp/
* mips.h (E_MIPS_ARCH_32R6, E_MIPS_ARCH_64R6): New enum constants.
gas/
* config/tc-mips.c (mips_nan2008): New static global.
(mips_flag_nan2008): Removed.
(LL_SC_FMT): New define.
(COP12_FMT): Updated.
(ISA_IS_R6): New define.
(ISA_HAS_64BIT_REGS): Add mips64r6.
(ISA_HAS_DROR): Likewise.
(ISA_HAS_64BIT_FPRS): Add mips32r6 and mips64r6.
(ISA_HAS_ROR): Likewise.
(ISA_HAS_ODD_SINGLE_FPR): Likewise.
(ISA_HAS_MXHC1): Likewise.
(hilo_interlocks): Likewise.
(md_longopts): Likewise.
(ISA_HAS_LEGACY_NAN): New define.
(options): Add OPTION_MIPS32R6 and OPTION_MIPS64R6.
(mips_ase): Add field rem_rev.
(mips_ases): Updated to add which ISA an ASE was removed in.
(mips_isa_rev): Add support for mips32r6 and mips64r6.
(mips_check_isa_supports_ase): Add support to check if an ASE
has been removed in the specified MIPS ISA revision.
(validate_mips_insn): Skip '-' character.
(macro_build): Likewise.
(mips_check_options): Prevent R6 working with fp32, mips16,
micromips, or branch relaxation.
(file_mips_check_options): Set R6 floating point registers to
64 bit. Also deal with the nan2008 option.
(limited_pcrel_reloc_p): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(operand_reg_mask): Add support for OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(match_check_prev_operand): New static function.
(match_same_rs_rt_operand): New static function.
(match_non_zero_reg_operand): New static function.
(match_operand): Added entries for: OP_SAME_RS_RT, OP_CHECK_PREV
and OP_NON_ZERO_REG.
(insns_between): Added case to deal with forbidden slots.
(append_insn): Added support for relocs: BFD_RELOC_MIPS_21_PCREL_S2
and BFD_RELOC_MIPS_26_PCREL_S2.
(match_insn): Add support for operands -A, -B, +' and +". Also
skip '-' character.
(mips_percent_op): Add entries for %pcrel_hi and %pcrel_lo.
(md_parse_option): Add support for mips32r6 and mips64r6. Also
update the nan option handling.
(md_pcrel_from): Add cases for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2.
(mips_force_relocation): Prevent forced relaxation for MIPS r6.
(md_apply_fix): Add support for relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(s_mipsset): Add support for mips32r6 and mips64r6.
(s_nan): Update to support the new nan2008 framework.
(tc_gen_reloc): Add relocs: BFD_RELOC_MIPS_21_PCREL_S2,
BFD_RELOC_MIPS_26_PCREL_S2, BFD_RELOC_MIPS_18_PCREL_S3,
BFD_RELOC_MIPS_19_PCREL_S2, BFD_RELOC_HI16_S_PCREL and
BFD_RELOC_LO16_PCREL.
(mips_elf_final_processing): Updated to use the mips_nan2008.
(mips_cpu_info_table): Add entries for mips32r6 and mips64r6.
(macro): Enable ldc2, sdc2, ll, lld, swc2, sc, scd, cache, pref
macros for R6.
(mips_fix_adjustable): Make PC relative R6 relocations relative
to the symbol and not the section.
* configure.ac: Add support for mips32r6 and mips64r6.
* configure: Regenerate.
* doc/c-mips.texi: Document the -mips32r6 and -mips64r6 command line
options.
* doc/as.texinfo: Likewise.
gas/testsuite/
* gas/mips/24k-triple-stores-1.s: If testing for r6 prevent
non-supported instructions from being tested.
* gas/mips/24k-triple-stores-2.s: Likewise.
* gas/mips/24k-triple-stores-3.s: Likewise.
* gas/mips/24k-triple-stores-6.s: Likewise.
* gas/mips/beq.s: Likewise.
* gas/mips/eva.s: Likewise.
* gas/mips/ld-zero-3.s: Likewise.
* gas/mips/mips32-cp2.s: Likewise.
* gas/mips/mips32.s: Likewise.
* gas/mips/mips4.s: Likewise.
* gas/mips/add.s: Don't test the add instructions if r6, and
add padding.
* gas/mips/add.d: Check for a triple dot not a nop at the end of the
disassembly output.
* gas/mips/micromips@add.d: Likewise.
* gas/mips/mipsr6@24k-branch-delay-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-1.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2-llsc.d: New file.
* gas/mips/mipsr6@24k-triple-stores-2.d: New file.
* gas/mips/mipsr6@24k-triple-stores-3.d: New file.
* gas/mips/mipsr6@24k-triple-stores-6.d: New file.
* gas/mips/mipsr6@add.d: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msingle-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-1-msoft-float.s: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.l: New file.
* gas/mips/mipsr6@attr-gnu-4-2-mdouble-float.s: New file.
* gas/mips/mipsr6@beq.d: New file.
* gas/mips/mipsr6@bge.d: New file.
* gas/mips/mipsr6@bgeu.d: New file.
* gas/mips/mipsr6@blt.d: New file.
* gas/mips/mipsr6@bltu.d: New file.
* gas/mips/mipsr6@branch-misc-1.d: New file.
* gas/mips/mipsr6@branch-misc-2-64.d: New file.
* gas/mips/mipsr6@branch-misc-2pic-64.d: New file.
* gas/mips/mipsr6@branch-misc-4-64.d: New file.
* gas/mips/mipsr6@cache.d: New file.
* gas/mips/mipsr6@eva.d: New file.
* gas/mips/mipsr6@jal-svr4pic-noreorder.d: New file.
* gas/mips/mipsr6@jal-svr4pic.d: New file.
* gas/mips/mipsr6@ld-zero-2.d: New file.
* gas/mips/mipsr6@ld-zero-3.d: New file.
* gas/mips/mipsr6@loc-swap-dis.d: New file.
* gas/mips/mipsr6@mips32-cp2.d: New file.
* gas/mips/mipsr6@mips32-imm.d: New file.
* gas/mips/mipsr6@mips32.d: New file.
* gas/mips/mipsr6@mips32r2.d: New file.
* gas/mips/mipsr6@mips4-fp.d: New file.
* gas/mips/mipsr6@mips4-fp.l: New file.
* gas/mips/mipsr6@mips4-fp.s: New file.
* gas/mips/mipsr6@mips4.d: New file.
* gas/mips/mipsr6@mips5-fp.d: New file.
* gas/mips/mipsr6@mips5-fp.l: New file.
* gas/mips/mipsr6@mips5-fp.s: New file.
* gas/mips/mipsr6@mips64.d: New file.
* gas/mips/mipsr6@msa-branch.d: New file.
* gas/mips/mipsr6@msa.d: New file.
* gas/mips/mipsr6@pref.d: New file.
* gas/mips/mipsr6@relax-swap3.d: New file.
* gas/mips/r6-64-n32.d: New file.
* gas/mips/r6-64-n64.d: New file.
* gas/mips/r6-64-removed.l: New file.
* gas/mips/r6-64-removed.s: New file.
* gas/mips/r6-64.s: New file.
* gas/mips/r6-attr-none-double.d: New file.
* gas/mips/r6-n32.d: New file.
* gas/mips/r6-n64.d: New file.
* gas/mips/r6-removed.l: New file.
* gas/mips/r6-removed.s: New file.
* gas/mips/r6.d: New file.
* gas/mips/r6.s: New file.
* gas/mips/mipsr6@mips32-dsp.d: New file.
* gas/mips/mipsr6@mips32-dspr2.d: New file.
* gas/mips/mipsr6@mips32r2-ill.l: New file.
* gas/mips/mipsr6@mips32r2-ill.s: New file.
* gas/mips/cache.s: Add r6 instruction varients.
* gas/mips/mips.exp: Add support for the mips32r6 and mips64r6
architectures. Also prevent non r6 supported tests from running.
Finally, add in support for running the new r6 tests.
(run_dump_test_arch): Add support for mipsr6 tests.
(run_list_test_arch): Add support for using files of the
form arch@testname.l .
include/elf/
* mips.h: Add relocs: R_MIPS_PC21_S2, R_MIPS_PC26_S2, R_MIPS_PC18_S3,
R_MIPS_PC19_S2, R_MIPS_PCHI16 and R_MIPS_PCLO16.
(E_MIPS_ARCH_32R6): New define.
(E_MIPS_ARCH_64R6): New define.
include/opcode/
* mips.h (mips_operand_type): Add new entries: OP_SAME_RS_RT,
OP_CHECK_PREV and OP_NON_ZERO_REG. Add descriptions for the MIPS R6
instruction arguments: -a, -b, -d, -s, -t, -u, -v, -w, -x, -y, -A, -B,
+I, +O, +R, +:, +\, +", +;
(mips_check_prev_operand): New struct.
(INSN2_FORBIDDEN_SLOT): New define.
(INSN_ISA32R6): New define.
(INSN_ISA64R6): New define.
(INSN_UPTO32R6): New define.
(INSN_UPTO64R6): New define.
(mips_isa_table): Add INSN_UPTO32R6 and INSN_UPTO64R6.
(ISA_MIPS32R6): New define.
(ISA_MIPS64R6): New define.
(CPU_MIPS32R6): New define.
(CPU_MIPS64R6): New define.
(cpu_is_member): Add cases for CPU_MIPS32R6, and CPU_MIPS64R6.
ld/
* ldmain.c (get_emulation): Add support for -mips32r6 and -mips64r6.
opcodes/
* mips-dis.c (mips_arch_choices): Add entries for mips32r6 and
mips64r6.
(parse_mips_dis_option): Allow MSA and virtualization support for
mips64r6.
(mips_print_arg_state): Add fields dest_regno and seen_dest.
(mips_seen_register): New function.
(print_insn_arg): Refactored code to use mips_seen_register
function. Add support for OP_SAME_RS_RT, OP_CHECK_PREV and
OP_NON_ZERO_REG. Changed OP_REPEAT_DEST_REG case to print out
the register rather than aborting.
(print_insn_args): Add length argument. Add code to correctly
calculate the instruction address for pc relative instructions.
(validate_insn_args): New static function.
(print_insn_mips): Prevent jalx disassembling for r6. Use
validate_insn_args.
(print_insn_micromips): Use validate_insn_args.
all the arguments are valid.
* mips-formats.h (PREV_CHECK): New define.
* mips-opc.c (decode_mips_operand): Add support for -a, -b, -d, -s,
-t, -u, -v, -w, -x, -y, -A, -B, +I, +O, +R, +:, +\, +", +;
(RD_pc): New define.
(FS): New define.
(I37): New define.
(I69): New define.
(mips_builtin_opcodes): Add MIPS R6 instructions. Exclude recoded
MIPS R6 instructions from MIPS R2 instructions.
The section name used to store the build-id on pe/coff is arbitrary, as it's
contents should be located using the pe/coff header's DataDirectory debug data
entry, not by using the section name.
But '.build-id' is not a good choice for that section name, as it is 9
characters long, and hence truncated to 8 characters when
--disable-long-section-names is used (which is the default, when producing an
executable with no dwarf debug sections, e.g. using ld --strip-all --build-id)
This truncation then breaks 'objcopy --only-keep-debug', which does use the
section name, due to concerns that keeping an arbitrary section which contains
the debug directory is not sensible.
binutils/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* objcopy.c (is_nondebug_keep_contents_section): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
ld/ChangeLog
2014-09-01 Jon TURNEY <jon.turney@dronecode.org.uk>
* emultempl/pe.em (write_build_id, setup_build_id): Change pe/coff
build-id section name from '.build-id' to '.buildid'.
* emultempl/pep.em (write_build_id, setup_build_id): Ditto.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
This also makes --enable-plugins default to on for hosts that can
support plugins, so we have consistent lto toolchain support. The
ACX_LARGEFILE moves aren't strictly necessary, but are harmless and
will be necessary if plugin support is extended to more hosts via
libtool's dlopen support. I started down that path then decided it
was more work than I was interested in doing. (ACX_LARGEFILE invokes
AC_PLUGINS.)
config/
* plugins.m4: Test for dlfcn.h or windows.h here to set default
for --enable-plugins. Report error if someone tries to enable
plugins on a host we don't support.
bfd/
* configure.ac: Delete redundant plugin related checks.
* configure: Regenerate.
binutils/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gas/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* config.in: Regenerate.
* configure: Regenerate.
gprof/
* configure.ac: Move ACX_LARGEFILE after LT_INIT.
* configure: Regenerate.
* gconfig.in: Regenerate.
ld/
* configure.ac: Move AC_PROG_CC and other macros earlier. Delete
plugin checks now done in config/plugins.m4.
* config.in: Regenerate.
* configure: Regenerate.
Non-EABI ARM targets set OSABI to ARM regardless of whether or not GNU
features have been used which causes this test to fail.
binutils/testsuite/ChangeLog:
2014-07-10 Will Newton <will.newton@linaro.org>
* binutils-all/objcopy.exp: Disable the strip-10 test on
non-EABI ARM configurations.
This removes usage of the obsolete AC_INIT and AM_INIT_AUTOMAKE in all
binutils configure.in files. The BFD version is now in bfd/version.m4
rather than bfd/configure.in, which allows automake to automatically
track this dependency.
bfd/
* version.m4: New file.
* configure.in: Include version.m4.
(AC_INIT): Update.
* Makefile.am (RELEASE): Delete.
(bfdver.h): Depend on development.sh, use instead of RELEASE.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
opcodes/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
binutils/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gas/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* configure.com: Get bfd version from bfd/version.m4.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
gprof/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
ld/
* configure.in: Include bfd/version.m4.
(AC_INIT, AM_INIT_AUTOMAKE): Use modern form.
(BFD_VERSION): Delete.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Remove bfd/configure.in.
* configure: Regenerate.
* Makefile.in: Regenerate.
for better packing. Removes a field and a flag that are never set.
bfd/
* bfd.c (struct bfd): Reorganise for better packing. Delete
"ifd" field. Make "format", "direction" and "flags" bitfields.
(HAS_LOAD_PAGE): Delete, renumber following flags.
* bfd-in2.h: Regenerate.
* coff-tic4x.c: Remove HAS_LOAD_PAGE from extra flags in target vecs.
binutils/
* objdump.c (dump_bfd_header): Don't print HAS_LOAD_PAGE.
* strings.c: Add -w/--include-all-whitespace option to include any
whitespace character in the displayed strings.
* NEWS: Mention the new feature.
* doc/binutils.texi (strings): Document the new command line
option.
The goal of this patch is to provide an easy way to make
--disable-werror the default when building binutils, or the parts
of binutils that need to get built when building GDB. In development
mode, we want to continue making -Werror the default with GCC.
But, when making releases, I think we want to make it as easy as
possible for regular users to successfully build from sources.
GDB already has this kind of feature to turn -Werror as well as
the use of the libmcheck library. As GDB Release Manager, I take
advantage of it to turn those off after having cut the branch.
I'd like to be able to do the same for the binutils bits. And
perhaps Tristan will want to do the same for his releases too
(not sure, binutils builders might be a little savvier than GDB
builders).
This patch introduces a new file, called development.sh, which
just sets a variable called $development. In our development branches
(Eg. "master"), it's set to true. But setting it to false would allow
us to change the default behavior of various development-related
features to be turned off; in this case, it turns off the use of
-Werror by default (use --enable-werror to turn it back on).
bfd/ChangeLog:
* development.sh: New file.
* warning.m4 (AM_BINUTILS_WARNINGS): Source bfd/development.sh.
Make -Werror the default with GCC only if DEVELOPMENT is true.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
$(srcdir)/development.sh.
* Makefile.in, configure: Regenerate.
binutils/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gas/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gold/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): New.
* Makefile.in, configure: Regenerate.
gprof/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
ld/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
opcodes/ChangeLog:
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add dependency on
bfd's development.sh.
* Makefile.in, configure: Regenerate.
gdb/ChangeLog:
* development.sh: Delete.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure.ac: Adjust development.sh source call.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
* configure.ac: Adjust development.sh source call.
* Makefile.in (config.status): Adjust dependency on development.sh.
* configure: Regenerate.
Tested on x86_64-linux by building two ways: One with DEVELOPMENT
set to true, and one with DEVELOPMENT set to false. In the first
case, I could see the use of -Werror, while it disappeared in
the second case.
the bfdtest1 and bfdtest2 executables will fail because they are not installed.
Since the programs only exist to be used by the testsuite it does not make sense
to install them, so instead I have chosen to create a patch which skips the tests
when they are not present.
* binutils-all/ar.exp: Skip tests involving bfdtest1 and bfdtest2
if these executables are not present.
original patches were posted:
pe/coff: Display GUID build-id in the conventional way
pe/coff: Don't interpret debug directory in section with no contents
pe/coff: Keep .build-id with --only-keep-debug
pe/coff: Don't break .build-id with objcopy/strip
* peXXigen.c (pe_print_debugdata): Don't interpret debug directory
in a section with no contents.
(is_vma_in_section, find_section_by_vma): New functions.
(_bfd_XX_bfd_copy_private_bfd_data_common): Recalculate file
offsets in the debug directory.
(_bfd_XXi_slurp_codeview_record, _bfd_XXi_write_codeview_record):
Byte-swap GUID from little-endian to big-endian order for
consistent and conventional display.
* objcopy.c (is_nondebug_keep_contents_section): New function.
(setup_section): Use it.
or 64-bit doubles. It also makes the linker complain if the user attempts
to link together binaries with different sized doubles.
* elf32-rl78.c (rl78_elf_merge_private_bfd_data): Complain if
64-bit doubles objects mix with 32-bit doubles objects.
(rl78_elf_print_private_bfd_data): Describe 64-bit doubles flag.
* readelf.c (get_machine_flags): Handle RL78 64-bit doubles flag.
* config/tc-rl78.c (enum options): Add OPTION_32BIT_DOUBLES
and OPTION_64BIT_DOUBLES.
(md_longopts): Add -m32bit-doubles and -m64bit-doubles.
(md_parse_option): Parse -m32bit-doubles and -m64bit-doubles.
(md_show_usage): Show all of the RL78 options.
(rl78_float_cons): New static functions.
(md_pseudo_table): Update handler for "double".
thought that an uncompressed .debug_str section was compressed.
* compress.c (bfd_is_section_compressed): When checking the
.debug_str section, also check the fifth byte in the section is
not part of a string.
* binutils-all/debug_str.s: New test.
* binutils-all/debug_str.d: New test control file.
* binutils-all/compress.exp: Run debug_str test.
ChangeLog:
binutils/
* doc/binutils.texi: Document the disassemble MIPS XPA instructions
command line option.
gas/
* config/tc-mips.c (options): Add OPTION_XPA and OPTION_NO_XPA.
(md_longopts): Add xpa and no-xpa command line options.
(mips_ases): Add MIPS XPA ASE.
(mips_cpu_info_table): Update p5600 entry to allow the XPA ASE.
* doc/as.texinfo: Document the MIPS XPA command line options.
* doc/c-mips.texi: Document the MIPS XPA command line options,
and assembler directives.
gas/testsuite/
* gas/mips/mips.exp: Add xpa tests.
* gas/mips/xpa.s: New test.
* gas/mips/xpa.d: Likewise.
include/
* opcode/mips.h (ASE_XPA): New define.
opcodes/
* mips-dis.c (mips_arch_choices): Update mips32r2 and mips64r2
to allow the MIPS XPA ASE.
(parse_mips_dis_option): Process the -Mxpa option.
* mips-opc.c (XPA): New define.
(mips_builtin_opcodes): Add MIPS XPA instructions and move the
locations of the ctc0 and cfc0 instructions.
bfd/
* mach-o.h (bfd_mach_o_dyld_info_command): Add rebase_content,
bind_content, weak_bind_content, lazy_bind_content,
export_content.
(bfd_mach_o_load_command): Add comments, add next field.
(mach_o_data_struct): Replace commands field by first_command
and last_command.
* mach-o.c (bfd_mach_o_append_command): New function.
(bfd_mach_o_bfd_copy_private_symbol_data): Add blank lines.
(bfd_mach_o_bfd_copy_private_section_data): Check flavour,
copy fields.
(bfd_mach_o_bfd_copy_private_header_data): Copy load commands.
(bfd_mach_o_pad4, bfd_mach_o_pad_command): New functions.
(bfd_mach_o_write_thread): Use macro instead of literal.
(bfd_mach_o_write_dylinker, bfd_mach_o_write_dylib)
(bfd_mach_o_write_main, bfd_mach_o_write_dyld_info): New
functions.
(bfd_mach_o_write_symtab_content): New function (extracted
from bfd_mach_o_write_symtab).
(bfd_mach_o_write_symtab): Split.
(bfd_mach_o_count_indirect_symbols): Move
(bfd_mach_o_build_dysymtab): Remove layout code.
(bfd_mach_o_write_contents): Rewritten to build commands in order.
(bfd_mach_o_count_sections_for_seg): Remove.
(bfd_mach_o_build_obj_seg_command): New function (extracted from
bfd_mach_o_build_seg_command).
(bfd_mach_o_build_exec_seg_command): New function.
(bfd_mach_o_build_dysymtab_command): Remove.
(bfd_mach_o_layout_commands): New function.
(bfd_mach_o_init_segment): New function.
(bfd_mach_o_build_commands): Major rework to handle non-object
files.
(bfd_mach_o_alloc_and_read, bfd_mach_o_read_dyld_content): New
function.
(bfd_mach_o_read_dyld_info): Clear content fields.
(bfd_mach_o_read_segment): Adjust call.
(bfd_mach_o_flatten_sections): Adjust as now load commands are
chained.
(bfd_mach_o_scan_start_address, bfd_mach_o_scan)
(bfd_mach_o_mkobject_init, bfd_mach_o_get_base_address)
(bfd_mach_o_lookup_command, bfd_mach_o_core_fetch_environment):
Likewise.
binutils/
* od-macho.c (dump_section_map): Adjust as load commands
are now chained.
(dump_load_command, dump_section_content): Likewise.
All strip operations require section headers to be present, as do most
objcopy operations. BFD is seriously confused by objects without
section info. The error message added here is similar to the error
on attempting to strip/objcopy a zero length object.
PR binutils/16811
* objcopy.c (copy_object): Error if no sections.
and have it loaded by default (as long as the --target option isn't used).
PR binutils/14698
ar.c: Set plugin_target early if plugins are supported.
nm.c: Likewise.
binutils/
* od-macho.c (OPT_DATA_IN_CODE): New macro.
(options): Add entry for data in code.
(mach_o_help): Ditto.
(data_in_code_kind_name): New array.
(dump_data_in_code): New function.
(dump_load_command): Handle data in code.
(mach_o_dump): Ditto.
(dump_header): Display a terminal newline.
This patche fixes the values of FDE pc in output of objdump -Wf. They now
match readelf ones.
binutils/
* objdump.c (load_specific_debug_section): Set address of section.
Minor fix in compact unwind output: to be more readable, the stack offset
for indirect compact unwind entries are mutiplied by its factor (4 or 8).
binutils/
* od-macho.c (dump_unwind_encoding_x86): Set the factor.
(dump_exe_compact_unwind): Change the condition. Improve
indentation.
linker testsuite failures were showing up for the cris target. Fixed by
this patch.
* readelf.c (process_version_sections): Fix off-by-one error in
previous delta.
send readelf into an infinite loop.
* readelf.c (process_version_sections): Prevent an infinite loop
when the vn_next field is zero but there are still entries to be
processed.
option coming *after* the command option not before it.
PR binutils/16652
* doc/binutils.texi (ar cmdline): Move --plugin command line
option to after the command option.
When a DW_FORM_flag_present attribute comes at the very end of a
debug section, readelf complains about a corrupt attribute
because it's checking to make sure there's at least one byte of
data remaining. This patch suppresses the check when the form
is DW_FORM_flag_present.
2014-02-11 Cary Coutant <ccoutant@google.com>
* binutils/dwarf.c (read_and_display_attr_value): Don't warn
for zero-length attribute value.
ELFOSABI_GNU for binaries containing unique symbols. So I am reverting that patch and
instead applying the patch below to fix up the targets that were triggering the test failure.
bfd/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* elf32-metag.c (elf_metag_post_process_headers): Call
_bfd_elf_post_process_headers.
* elf32-sh64.c (sh64_elf_copy_private_data): Call
_bfd_elf_copy_private_data.
* elf64-sh64.c (sh_elf64_copy_private_data_internal): Likewise.
binutils/testsuite/ChangeLog
2014-01-29 Nick Clifton <nickc@redhat.com>
* binutils-all/strip-10.d: Revert previous delta.
ELF headers will be copied from input files. This in turn has broken
the strip-10 test in the binutils testsuite, so this patch updates the
expected output.
PR binutils/16318
* binutils-all/strip-10.d: Allow "System V" in the osabi field.
binutils/
* version.c (print_version): Update copyright year to 2014.
gas/
* as.c (parse_args): Update copyright year to 2014.
gold/
* version.cc (print_version): Update copyright year to 2014.
ld/
* ldver.c (ldversion): Update copyright year to 2014.
opcodes/
* i386-gen.c (process_copyright): Update copyright year to 2014.
This removes the last uses of the obsolete VA_* macros from binutils.
All the binutils and bfd changes were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* elf32-xtensa.c (vsprint_msg): Don't use old VA_* compatibility
wrappers.
2014-01-07 Tom Tromey <tromey@redhat.com>
* bucomm.c (fatal, non_fatal): Replace obsolete VA_* macros with
stdarg macros.
* dlltool.c (inform): Replace obsolete VA_* macros with stdarg
macros.
* dllwrap.c (inform, warn): Replace obsolete VA_* macros with
stdarg macros.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-tic30.c (debug): Avoid old VA_* compatibility
wrappers.
This removes the last uses of PARAMS from binutils.
The two changes in binutils were tested by rebuilding.
I didn't rebuild the gas change but I think it is obviously correct.
2014-01-07 Tom Tromey <tromey@redhat.com>
* coffgrok.h (coff_ofile): Don't use PARAMS.
* nlmheader.y (strerror): Don't use PARAMS.
2014-01-07 Tom Tromey <tromey@redhat.com>
* config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
use PARAMS.
It is a good pratice to set the SHF_INFO_LINK bit when the sh_info field
represents a section header index.
bfd/
PR binutils/16317
* elf.c (assign_section_numbers): Set the SHF_INFO_LINK bit for
SHT_REL/SHT_RELA sections when setting the sh_info field.
binutils/testsuite/
PR binutils/16317
* binutils-all/readelf.s: Updated.
* binutils-all/readelf.s-64: Likewise.
ld/testsuite/
PR binutils/16317
* ld-elf/linkinfo1.s: New file.
* ld-elf/linkinfo1a.d: Likewise.
* ld-elf/linkinfo1b.d: Likewise.
I happened to run readelf on an ELF file created by Guile. readelf
complained about invalid values for DW_FORM_strp. At first I assumed
this was just a Guile bug, but eu-readelf did the right thing, so I
looked a bit deeper.
I came across some old Mach-O code to bias some offsets by section
addresses. Guile, unlike many ELF writers, sets the address for the
various DWARF-related sections, causing this unusual code to be run.
This code came from an old commit:
2005-09-30 H.J. Lu <hongjiu.lu@intel.com>
* dwarf.c (fetch_indirect_string): Adjust for section address.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
* objdump.c (mach_o_dwarf_sections): New.
(generic_dwarf_sections): Likewise.
(check_mach_o_dwarf): Likewise.
(dump_dwarf): Call check_mach_o_dwarf.
However it was partially reverted here:
https://sourceware.org/ml/binutils/2008-11/msg00134.html
This patch just completes the reversion.
Built and regtested on x86-64 Fedora 18. I also ran the resulting
readelf against the Guile-created object with success.
I have no way of testing this on Mach-O, so your feedback is
solicited.
2013-12-19 Tom Tromey <tromey@redhat.com>
* dwarf.c (fetch_indirect_string): Don't bias by section address.
(fetch_indexed_string): Likewise.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
These files are source files and have no business being +x. We couldn't
easily fix it in CVS (you need login+write access to the raw rcs files),
but we can fix this w/git.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
an entry in a .rsrc section.
(pe_print_resource_directory): New function: Displays a directory
in a .rsrc section.
(pe_print_rsrc): New function: Displays the contents of .rsrc
section.
(_bfd_XX_print_private_bfd_data_common): Call pe_print_rsrc.
* binutils-all/windres/windres.exp: Run for x86_64-pc-cygwin.
Add test of "objump -p" output.
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* binutils-all/objcopy.exp: Consider mips-mti-elf the same as
mips-sde-elf
* binutils-all/readelf.exp: Likewise
gas/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* gas/mips/mips.exp: Consider mips-mti-elf the same as mips-sde-elf
ld/testsuite/
2013-11-27 Matthew Fortune <matthew.fortune@imgtec.com>
* ld-mips-elf/mips-elf.exp: Consider mips-mti-elf the same as
mips-sde-elf
output deterministic. time.h include is no longer needed.
* resres.c (res_append_resource): Likewise.
* pe-dll.c (fill_edata): Only use a real timestamp if
--insert-timestamp was used.
* emultempl/pe.em: Add the --insert-timestamp option.
* emultempl/pep.em: Likewise for 64bit.
* ld.texinfo: Document the --insert-timestamp option.
* libcoff-in.h: Add insert_timestamp flag to the pe_data struct.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Only use a real
timestamp if --insert-timestamp was used.
bfd/
* archures.c (bfd_mach_i386_nacl): Fix definition so it doesn't
collide with bfd_mach_l1om.
* bfd-in2.h: Regenerate.
* elf32-i386.c (elf32_i386_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-i386-nacl definition.
* elf64-x86-64.c (elf64_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf64-x86-64-nacl definition.
(elf32_x86_64_nacl_elf_object_p): New function.
(elf_backend_object_p): Use that in elf32-x86-64-nacl definition.
binutils/
* objdump.c (dump_dwarf): Grok bfd_mach_x86_64_nacl and
bfd_mach_x64_32_nacl as equivalent to bfd_mach_x86_64.
ld/testsuite/
* ld-x86-64/x86-64.exp (mixed1, mixed2): Loosen error string match
so it accepts "i386:nacl" in place of "i386".
* ld-x86-64/ilp32-2.d: Likewise.
* ld-x86-64/ilp32-3.d: Likewise.
* ld-x86-64/lp64-2.d: Likewise.
* ld-x86-64/lp64-3.d: Likewise.
I think HJ has already fixed the binutils and ld tests with his
2013-09-27 readelf change, but this allows them to pass with wider
address output as per Nick's 2013-09-12 readelf change.
binutils/testsuite/
* binutils-all/x86-64/compressed-1a.d: Allow wide display of addresses.
gas/testsuite/
* gas/cfi/cfi-x86_64.d: Match when lacking end of section padding.
ld/testsuite/
* ld-pe/cfi.d: Allow wide display of addresses.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
This defines the ELF symbol st_other field used to encode the number
of instructions between a function "global entry" and its "local entry",
and adds support related to the local entry offset.
include/elf/
* ppc64.h (STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Define.
(ppc64_decode_local_entry, ppc64_encode_local_entry): New functions.
(PPC64_LOCAL_ENTRY_OFFSET, PPC64_SET_LOCAL_ENTRY_OFFSET): Define.
bfd/
* elf64-ppc.c (struct ppc_stub_hash_entry): Add "other".
(stub_hash_newfunc): Init new ppc_stub_hash_entry field, and one
we forgot, "plt_ent".
(ppc64_elf_add_symbol_hook): Check ELFv1 objects don't have
st_other bits only valid in ELFv2.
(ppc64_elf_merge_symbol_attribute): New function.
(ppc_type_of_stub): Add local_off param to test branch range.
(ppc_build_one_stub): Adjust destinations for ELFv2 locals.
(ppc_size_one_stub, toc_adjusting_stub_needed): Similarly.
(ppc64_elf_size_stubs): Pass local_off to ppc_type_of_stub.
Set "other" field.
(ppc64_elf_relocate_section): Adjust destination for ELFv2 local
calls.
gas/
* config/tc-ppc.c (md_pseudo_table): Add .localentry.
(ppc_elf_localentry): New function.
(ppc_force_relocation): Force relocs on all branches to localenty
symbols.
(ppc_fix_adjustable): Don't reduce such symbols to section+offset.
binutils/
* readelf.c (get_ppc64_symbol_other): New function.
(get_symbol_other): Use it for EM_PPC64.
Defines bits in ELF e_flags to differentiate ELFv2 objects from ELFv2,
adds .abiversion directive to explicitly choose the ABI, and code to
check and automatically select ABI.
include/elf/
* ppc64.h (EF_PPC64_ABI): Define.
bfd/
* elf64-ppc.c (abiversion, set_abiversion): New functions.
(ppc64_elf_get_synthetic_symtab): Handle ELFv2 objects without .opd.
(struct ppc_link_hash_table): Add opd_abi.
(ppc64_elf_check_relocs): Check no .opd with ELFv2.
(ppc64_elf_merge_private_bfd_data): New function.
(ppc64_elf_print_private_bfd_data): New function.
(ppc64_elf_tls_setup): Set htab->opd_abi.
(ppc64_elf_size_dynamic_sections): Don't emit OPD related dynamic
tags for ELFv2.
(ppc_build_one_stub): Use R_PPC64_IRELATIVE for ELFv2 ifunc.
(ppc64_elf_finish_dynamic_symbol): Likewise
binutils/
* readelf.c (get_machine_flags): Display ABI version for EM_PPC64.
gas/
* config/tc-ppc.c: Include elf/ppc64.h.
(ppc_abiversion): New variable.
(md_pseudo_table): Add .abiversion.
(ppc_elf_abiversion, ppc_elf_end): New functions.
* config/tc-ppc.h (md_end): Define.
Here's another small patch to lay the groundwork for the git
conversion. This one updates the BFD and binutils documentation for
the move.
bfd:
* doc/bfdint.texi (BFD generated files): Mention git, not cvs.
binutils:
* MAINTAINERS: Mention git, not cvs.
* README: Mention git, not cvs.
2013-08-19 Tristan Gingold <gingold@adacore.com>
* nm.c (print_size_symbols): Directly get symbol size.
binutils/testsuite/
2013-08-19 Tristan Gingold <gingold@adacore.com>
* binutils-all/nm.exp: Add a test for nm --size-sort
* binutils-all/nm-elf-1.s: New file.
* binutils-all/nm-1.s: New file.
* readelf.c (get_unwind_section_word): Whilst searching for a
reloc section associated with an unwind section, check the type as
well as the section number.
* mips.h (EF_MIPS_NAN2008): New macro.
bfd/
* elfxx-mips.c (_bfd_mips_elf_merge_private_bfd_data): Handle
EF_MIPS_NAN2008.
(_bfd_mips_elf_print_private_bfd_data): Likewise.
binutils/
* readelf.c (get_machine_flags): Handle EF_MIPS_NAN2008.
gas/
* config/tc-mips.c (mips_flag_nan2008): New variable.
(options): Add OPTION_NAN enum value.
(md_longopts): Handle it.
(md_parse_option): Likewise.
(s_nan): New function.
(mips_elf_final_processing): Handle EF_MIPS_NAN2008.
(md_show_usage): Add -mnan.
* doc/as.texinfo (Overview): Add -mnan.
* doc/c-mips.texi (MIPS Opts): Document -mnan.
(MIPS NaN Encodings): New node. Document .nan directive.
(MIPS-Dependent): List the new node.
gas/testsuite/
* gas/mips/nan-2008-1.d: New test.
* gas/mips/nan-2008-2.d: New test.
* gas/mips/nan-2008-3.d: New test.
* gas/mips/nan-2008-4.d: New test.
* gas/mips/nan-legacy-1.d: New test.
* gas/mips/nan-legacy-2.d: New test.
* gas/mips/nan-legacy-3.d: New test.
* gas/mips/nan-legacy-4.d: New test.
* gas/mips/nan-legacy-5.d: New test.
* gas/mips/nan-error-1.l: New list test.
* gas/mips/nan-error-2.l: New list test.
* gas/mips/nan-2008-override.s: New test source.
* gas/mips/nan-2008.s: New test source.
* gas/mips/nan-legacy-override.s: New test source.
* gas/mips/nan-legacy.s: New test source.
* gas/mips/nan-error-1.s: New test source.
* gas/mips/nan-error-2.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/nan-2008.d: New test.
* ld-mips-elf/nan-legacy.d: New test.
* ld-mips-elf/nan-mixed-1.d: New test.
* ld-mips-elf/nan-mixed-2.d: New test.
* ld-mips-elf/nan-2008.s: New test source.
* ld-mips-elf/nan-legacy.s: New test source.
2013-07-09 Tristan Gingold <gingold@adacore.com>
* configure.com: Add new defines to match changes in configure.
gas/
2013-07-09 Tristan Gingold <gingold@adacore.com>
* configure.com: Define HAVE_SYS_TYPES_H and HAVE_UNISTD_H
* doc/binutils.texi: Document -Mvirt disassembler option.
gas/ChangeLog:
* config/tc-mips.c (struct mips_set_options): New ase_virt field.
(mips_opts): Update for the new field.
(file_ase_virt): New variable.
(ISA_SUPPORTS_VIRT_ASE): New macro.
(ISA_SUPPORTS_VIRT64_ASE): New macro.
(MIPS_CPU_ASE_VIRT): New define.
(is_opcode_valid): Handle ase_virt.
(macro_build): Handle "+J".
(validate_mips_insn): Likewise.
(mips_ip): Likewise.
(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
(md_longopts): Add mvirt and mnovirt
(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
(mips_after_parse_args): Handle ase_virt field.
(s_mipsset): Handle "virt" and "novirt".
(mips_elf_final_processing): Add a comment about virt ASE might need a new flag.
(md_show_usage): Print out the usage of -mvirt and mno-virt options.
* doc/c-mips.texi: Document -mvirt and -mno-virt.
Document ".set virt" and ".set novirt".
gas/testsuite/ChangeLog:
* gas/mips/mips.exp: Run virt and virt64 testcases.
* gas/mips/virt.d: New file.
* gas/mips/virt.s: New file.
* gas/mips/virt64.d: New file.
* gas/mips/virt64.s: New file.
include/opcode/ChangeLog:
* mips.h (OP_MASK_CODE10): Correct definition.
(OP_SH_CODE10): Likewise.
Add a comment that "+J" is used now for OP_*CODE10.
(INSN_ASE_MASK): Update.
(INSN_VIRT): New macro.
(INSN_VIRT64): New macro
opcodes/ChangeLog:
* mips-dis.c (mips_arch_choices): Add INSN_VIRT to mips32r2 .
Add INSN_VIRT and INSN_VIRT64 to mips64r2.
(parse_mips_dis_option): Handle the virt option.
(print_insn_args): Handle "+J".
(print_mips_disassembler_options): Print out message about virt64.
* mips-opc.c (IVIRT): New define.
(IVIRT64): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp VIRT instructions.
Move rfe to the bottom as it conflicts with tlbgp.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
