gdb/ChangeLog:
* linespec.c (struct collect_minsyms) [list_mode]: New field.
(add_minsym): Ignore data symbols if not in list mode.
(search_minsyms_for_name): Set local.list_mode.
gdb/testsuite/ChangeLog:
* gdb.base/dmsym.c, gdb.base/dmsym_main.c, gdb.base/dmsym.exp:
New files.
* symfile.c (reread_symbols): Move free_objfile_separate_debug,
preserve_values, sym_finish and clear_objfile_data calls before BFD
close. Move free_objfile_separate_debug as the very first call. New
comment on the ordering.
gdb/testsuite/
* gdb.base/reread.exp: If srcfile2 fails to build retry it with
-DNO_SECTIONS.
* gdb.base/reread2.c <!NO_SECTIONS>: New sections block.
* gdb.base/break-entry.exp: Move the target use_gdb_stub test before
starting GDB.
* gdb.base/default.exp: Replace target use_gdb_stub checks by global
$use_gdb_stub.
* gdb.base/display.exp: Likewise.
* gdb.base/ending-run.exp: Likewise.
* gdb.base/list.exp (test_listsize): Likewise.
* gdb.base/setshow.exp: Likewise.
* gdb.base/valgrind-db-attach.exp: Set global use_gdb_stub to 1.
* lib/gdb.exp (gdb_run_cmd, gdb_start_cmd): Replace target use_gdb_stub
check by global $use_gdb_stub.
(gdb_test_multiple): Forbid run, start or attach for !$use_gdb_stub.
(default_gdb_start): Set global use_gdb_stub from target use_gdb_stub.
(default_gdb_init): Unset global $use_gdb_stub.
(gdb_continue_to_end, rerun_to_main): Replace target use_gdb_stub check
by global $use_gdb_stub.
* lib/gdbserver-support.exp: Extend comments for set_board_info
gdb_protocol and gdb,socketport.
(gdbserver_start_extended): Set global gdbserver_protocol and
gdbserver_gdbport. Clear global use_gdb_stub.
* lib/mi-support.exp (default_mi_gdb_start): Set global use_gdb_stub
from target use_gdb_stub.
(mi_run_cmd): Replace target use_gdb_stub check by global $use_gdb_stub.
* gdb.base/gdb.fortran.exp: Use shlib= flag when linking main
application. Call gdb_load_shlibs.
* gdb.mi/mi-solib.exp: Use mi_load_shlibs instead of gdb_load_shlibs.
* gdb.base/skip-solib.exp (executable_main): New variable.
(binfile_main): Base it on that.
Use $executable_main in clean_restart calls. Drop gdb_exit and
gdb_start calls.
* gdb.base/async-shell.exp: Skip the testfile for use_gdb_stub.
* gdb.base/attach-pie-misread.exp: Likewise.
* gdb.base/break-interp.exp: Likewise.
* gdb.base/default.exp (attach, run "r" abbreviation, run): Skip these
testcases for use_gdb_stub.
* gdb.dwarf2/dw2-restore.exp: Fix the run for use_gdb_stub.
(continue): New testcase.
* gdb.python/py-events.exp: Skip the testfile for use_gdb_stub.
* gdb.threads/attach-into-signal.exp: Likewise.
* gdb.threads/attach-stopped.exp: Likewise.
* gdb.threads/attachstop-mt.exp: Likewise.
initialize them from target PT_PHDR p_vaddr, relocate sect_addr by
pt_phdr if PT_PHDR was found.
* gdb.base/attach-pie-noexec.c: New files.
* gdb.base/attach-pie-noexec.exp: New files.
Fix results with system glibc debug info installed.
* gdb.base/disp-step-syscall.exp (continue to $syscall (1st time))
(continue to $syscall (2nd time), continue to $syscall (3rd time)):
Accept also __libc_ symbol prefix and no prefix.
Display @entry parameter values (without references).
* dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New functions.
* dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New declarations.
* dwarf2loc.c (dwarf2_find_location_expression): Support location list
entry record.
(dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry)
(value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New
functions.
(dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry.
(loclist_read_variable_at_entry): New function.
(dwarf2_loclist_funcs): Install loclist_read_variable_at_entry.
* dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in
DW_AT_location, call dwarf_block_to_sp_offset for it.
* frame.h (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values): New declarations.
(struct frame_arg): New field entry_kind.
(read_frame_arg): New parameter entryargp.
* mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for
arg->entry_kind. Optionally print the `@entry' suffix.
(list_args_or_locals): New variable entryarg, initialize it.
Initialize also entry_kind of arg and entryarg. Conditionalize
list_arg_or_local for arg, add list_arg_or_local for entryarg. Call
xfree for entryarg.error.
* stack.c (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values_choices)
(print_entry_values): New variables.
(print_frame_arg): New gdb_assert for arg->entry_kind. Optionally
print the `@entry' suffix, possibly in combination for
print_entry_values_compact.
(read_frame_arg): New parameter entryargp, new variables entryval,
entryval_error and val_equal. Read in also entryargp, respect
print_entry_values, compare the values using val_equal, fill in also
argp->entry_kind (together with entryargp->entry_kind).
(print_frame_args): New variable entryarg, initialize it.
Conditionalize print_frame_arg for arg, add print_frame_arg for
entryarg. Call xfree for entryarg.error.
(_initialize_stack): Call add_setshow_enum_cmd for `entry-values'.
* symtab.h (struct symbol_computed_ops): New field
read_variable_at_entry.
gdb/doc/
Display @entry parameter values (without references).
* gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call
example.
(Print Settings): New description of set print entry-values and show
print entry-values.
gdb/testsuite/
Display @entry parameter values (without references).
* gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2)
(different, validity, invalid): New functions.
(main): Call them.
* gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr,
stacktest, breakhere_stacktest, different, breakhere_different,
breakhere_validity and breakhere_invalid.
(entry: bt): Update for @entry.
(entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *)
(entry_validity: *, entry_invalid: *): Many new tests.
* gdb.base/break.exp
(run until breakpoint set at small function, optimized file): Accept
also the @entry suffix.
* gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value.
* gdb.mi/mi2-amd64-entry-value.c: New files.
* gdb.mi/mi2-amd64-entry-value.exp: New files.
Initially, I noticed that the save command was often missing
new lines in the file that it generated. For instance, consider:
% gdb save-bp
(gdb) b break_me
(gdb) b save-bp.c:27
(gdb) save breakpoints bps
The contents of the bps file would be:
% cat bps
break break_mebreak save-bp.c:27
Looking further into the problem, I realized that the missing newlines
are just a consequence of a missing call to print_recreate_thread.
After having generated the breakpoint location in the break command,
we cannot put a new line until we have looked at whether we need to
add a 'thread NUM' argument.
gdb/ChangeLog:
* breakpoint.c (bkpt_print_recreate): Add call to
print_recreate_thread.
gdb/testsuite/ChangeLog:
* gdb.base/save-bp.exp, gdb.base/save-bp.c: New files.
* lib/gdb.exp (can_single_step_to_signal_handler): New.
* gdb.base/kill-after-signal.exp: Call it. Skip if target doesn't
support single step to signal handler.
2011-09-12 Pedro Alves <pedro@codesourcery.com>
Matt Rice <ratmice@gmail.com>
PR gdb/13175
* interps.c (struct interp) <interpreter_out>: Delete field.
(interp_new): Remove the data and uiout parameters and adjust.
(interp_set): Only set the current_uiout from the interpreter's
uiout after initializing the interpreter. Adjust call to
init_proc.
(interp_ui_out): Adjust to call procs->ui_out_proc.
(interp_data, interp_name): New.
* interps.h (interp_init_ftype): Add `self' parameter.
(interp_ui_out_ftype): New typedef.
(struct interp_procs) <ui_out_proc>: New method pointer.
(interp_new): Remove the data and uiout parameters.
(interp_data, interp_name): Declare.
* tui/tui-interp.c (tui_init): Adjust prototype.
(tui_ui_out): New.
(_initialize_tui_interp): Install tui_ui_out. Don't instanciate
tui_out here. Adjust call to interp_new.
* tui/tui-io.c (tui_initialize_io): Don't set current_uiout here.
* cli/cli-interp.c (cli_interpreter_init): Adjust prototype.
(cli_ui_out): New.
(_initialize_cli_interp): Install it. Adjust call to interp_new.
* mi/mi-common.h (struct mi_interp) <uiout>: New field.
* mi/mi-interp.c (mi_interpreter_init): Adjust prototype.
Initialize mi->uiout depending on the mi_version as extracted from
the interpreter's name.
(mi_ui_out): New.
(_initialize_mi_interp): Install mi_ui_out. Adjust calls to
interp_new. Don't allocate the ui_out's of the interpreters here.
gdb/testsuite/
2011-09-12 Matt Rice <ratmice@gmail.com>
Pedro Alves <pedro@codesourcery.com>
PR gdb/13175
* gdb.base/interp.exp: New tests.
* gdb.base/interp.c: New file.
* gdb.base/annota1.exp, gdb.base/annota3.exp: Extract the
inferior's pid and look for a core dump named core.$pid. Use
`remote_file' commands on the host instead of hand coding shell
commands on the build.
* gdb.base/valgrind-db-attach.exp: Kill the program before
finishing the test.
* breakpoint.c (bpstat_do_actions): New variable cleanup_if_error, call
make_bpstat_clear_actions_cleanup and discard_cleanups for it.
* defs.h (make_bpstat_clear_actions_cleanup): New declaration.
* exceptions.c (throw_exception): Remove the bpstat_clear_actions call.
* inf-loop.c (inferior_event_handler): New variable cleanup_if_error,
call make_bpstat_clear_actions_cleanup and discard_cleanups for it.
Call bpstat_clear_actions for failed fetch_inferior_event_wrapper.
* infrun.c (fetch_inferior_event): Call
make_bpstat_clear_actions_cleanup.
* top.c (execute_command): New variable cleanup_if_error, call
make_bpstat_clear_actions_cleanup and discard_cleanups for it.
* utils.c (do_bpstat_clear_actions_cleanup)
(make_bpstat_clear_actions_cleanup): New functions.
gdb/testsuite/
* gdb.base/commands.exp (error_clears_commands_left): New function.
(): Call it.
gdb/
* printcmd.c (current_display_number): Update comment.
(disable_current_display_cleanup): Delete.
(do_one_display): Use make_cleanup_restore_integer. Gracefully
catch errors thrown while evaluating and printing the display.
gdb/testsuite/
* gdb.base/display.c (do_loops): New `p_i' local.
* gdb.base/display.exp: Test displaying a variable that is
temporarily at a bad address.
* gdb.base/jit-so.exp: Likewise. Also, use gdb_load_shlibs
and call dlopen without full path name.
* gdb.cp/infcall-dlopen.exp: Use gdb_load_shlibs and call
dlopen without full path name.
* breakpoint.c (update_global_location_list): Ensure
invariant 'first loc marked not duplicated and inserted,
following locs marked duplicated/not inserted' is respected
for multiple locations at the same address.
(unduplicated_should_be_inserted) New function.
(swap_insertion) New function.
2011-08-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/break-always.exp: Complete the test
with duplicated breakpoints and enabling/disabling them.
PR gdb/13045
* doublest.c (convert_doublest_to_floatformat): Pass correct
mantissa length to put_field.
testsuite/ChangeLog:
2011-07-30 Paul Pluzhnikov <ppluzhnikov@google.com>
PR gdb/13045
* gdb.base/float.exp: Add new test case for PR gdb/13045
* gdb.base/float.c: New file.
* typeprint.c (_initialize_typeprint): Extend the help of "whatis" and
"ptype" by their typedefs difference.
gdb/testsuite/
* gdb.base/help.exp (help whatis): Update the expected string.
gdb/
* breakpoint.c (works_in_software_mode_watchpoint): Also return
true for software watchpoints.
gdb/testsuite/
* gdb.base/watchpoint.exp
(test_disable_enable_software_watchpoint): New procedure.
(top level): Run it.
* macrotab.h (macro_callback_fn): Add new arguments to callback.
* macrotab.c (foreach_macro): Ditto.
(foreach_macro_in_scope): Ditto.
* macrocmd.c (print_macro_callback): New function.
(info_macro_command): Move some code to print_macro_definition.
(print_macro_definition): New function.
(print_one_macro): Add new arguments to callback.
testsuite/
* gdb.base/info-macros.c: New test sources.
* gdb.base/info-macros.exp: New tests.
docs/
* gdb.texinfo (Macros): Add info definitions and info macros commands.
Update text and cindex entries for info macro command.
Fall back linespec to minimal symbols.
* linespec.c (decode_line_1): New variable ex, saved_argptr. Protect
decode_compound by TRY_CATCH, fall back on minsyms if it failed.
(find_method, symbol_found): Change error to cplusplus_error.
gdb/testsuite/
Fall back linespec to minimal symbols.
* gdb.base/psymtab.exp (Don't search past end of psymtab.): Update the
error message.
* gdb.cp/cplusfuncs.exp (list foo::operator int*): Likewise.
* gdb.cp/minsym-fallback-main.cc: New file.
* gdb.cp/minsym-fallback.cc: New file.
* gdb.cp/minsym-fallback.exp: New file.
* gdb.cp/minsym-fallback.h: New file.
* dwarf2read.c (check_physname): New variable.
(dwarf2_physname): Prefer DW_AT_linkage_name over dwarf2_compute_name.
(show_check_physname): New function.
(_initialize_dwarf2_read): Add `check-physname' for check_physname.
gdb/doc/
* gdb.texinfo (Debugging Output): Document set debug
check-physname.
gdb/testsuite/
* gdb.base/break-interp.exp (reach_1, test_ld): Allow also the prefix
__GI_.
* gdb.cp/psymtab-parameter.cc (func): Make it a template function.
(f): New function.
* gdb.cp/psymtab-parameter.exp (complete break 'func(): Rename to ...
(complete p 'func<short>(): ... here.
* gdb.dwarf2/dw2-linkage-name-trust-main.cc: New file.
* gdb.dwarf2/dw2-linkage-name-trust.S: New file.
* gdb.dwarf2/dw2-linkage-name-trust.exp: New file.
* gdb.cp/temargs.exp (test type of F in k3_m, test value of F in k3_m):
Make them KFAIL gcc/49546.
* gdb.base/dump.exp (capture_pointer_with_type): New.
Get value from address instead of name.
Start GDB once, and do `dump' and `restore'
tests together.
gdb/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* breakpoint.c, breakpoint.h, cli/cli-dump.c, dwarf2expr.c,
gdbarch.c, gdbarch.sh, remote.c: Various spelling fixes.
gdb/testsuite/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* gdb.base/help.exp: Adjust following some spelling corrections
in GDB.
gdb/
* breakpoint.c (watchpoint_check): If the watchpoint went out of
scope, clear its command list.
(map_breakpoint_numbers): Don't walk the related breakpoints list
of each breakpoint.
gdb/testsuite/
* gdb.base/commands.exp (watchpoint_command_test): Check that the
watchpoint's command list didn't execute when the watchpoint went
out of scope.
* c-lang.c (evaluate_subexp_c): Use expect_type if it is not
NULL.
gdb/testsuite
* gdb.base/charset.exp (string_display): Add tests to assign to
arrays.
* gdb.base/charset.c (short_array, int_array, long_array): New.
quote pattern to avoid problems with Cygwin/mingw expect versions.
* gdb.base/default.exp (show convenience): Use double
quote pattern for regular expressions.
gdb/testsuite/
* gdb.ada/start.exp: Call untested with the correct test filename.
* gdb.arch/i386-bp_permanent.exp: Call untested with the correct
test filename. Make the test's binary unique.
* gdb.arch/i386-signal.exp: Call untested with the correct test
filename.
* gdb.arch/i386-size-overlap.exp: Ditto.
* gdb.arch/Makefile.in (EXECUTABLES): Update.
* gdb.base/gcore-buffer-overflow.exp: Ditto.
* gdb.cp/call-c.exp: Ditto.
* gdb.mi/mi-reverse.exp: Call untested with the correct test
filename. Make the test's binary unique.
* gdb.mi/Makefile.in (EXECUTABLES): Update.
* gdb.python/py-mi.exp: Ditto.
* gdb.python/Makefile.in (EXECUTABLES): Update.
* gdb.reverse/i386-precsave.exp: Ditto.
* gdb.reverse/i387-env-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/i387-stack-reverse.exp: Ditto.
* gdb.reverse/sigall-precsave.exp: Ditto. Make the test's binary
unique.
* gdb.reverse/sigall-reverse.exp: Call untested with the correct
test filename.
* gdb.reverse/Makefile.in (EXECUTABLES): Update.
* gdb.trace/tfile.exp: Ditto.
PR testsuite/12649
Fix races.
* gdb.base/completion.exp: Remove all sleep calls. Remove
unnecessary regexs. Don't explicitly expect anything after the
prompt. Eat the prompt if necessary.
* infrun.c (proceed): Revert previous change.
(resume): Instead, handle the case of signal delivery while stepping
off a breakpoint location here, and only if software single-stepping
is used. Handle nested signals.
gdb/testsuite/
* gdb.base/signest.exp: New file.
* gdb.base/signest.c: Likewise.
* gdb.texinfo (Index Section Format): Change the version to 5.
Describe the different formula.
gdb/
Case insensitive lookups implementation.
* dwarf2read.c: Include ctype.h.
(struct mapped_index): New field version.
(mapped_index_string_hash): New parameter index_version. New comment
for it. Call tolower appropriately.
(find_slot_in_mapped_hash): New variable cmp, initialize it, use it.
Choose the right index version for mapped_index_string_hash.
(dwarf2_read_index): Support also the index version 5. Initialize the
new struct mapped_index field version.
(hash_strtab_entry): Pass INT_MAX for the new parameter, explain why.
(find_slot): Explain the version needs. Pass INT_MAX for the new
parameter.
(write_psymtabs_to_index): Produce version 5.
* minsyms.c (lookup_minimal_symbol): New variable cmp, initialize it,
use it. New comment for SYMBOL_MATCHES_SEARCH_NAME.
* psymtab.c (lookup_partial_symbol): Find the
SYMBOL_MATCHES_SEARCH_NAME start of the found block of matching
entries.
* symtab.c (lookup_symbol_in_language): Remove the case_sensitive_off
NAME lowercasing.
(search_symbols): Pass REG_ICASE to regcomp for case_sensitive_off.
(completion_list_add_name): New variable ncmp, initialize it, use it.
* symtab.h (SYMBOL_HASH_NEXT): Always call tolower.
* utils.c (strcmp_iw): Support case_sensitive_off.
(strcmp_iw_ordered): Sort in a way compatible with case_sensitive_off.
New function comment part. New variables saved_string1,
saved_string2 and case_pass. Add a proper second pass.
gdb/testsuite/
* gdb.base/fortran-sym-case.c: New file.
* gdb.base/fortran-sym-case.exp: New file.
* gdb.dwarf2/dw2-case-insensitive-debug.S: New file.
* gdb.dwarf2/dw2-case-insensitive.c: New file.
* gdb.dwarf2/dw2-case-insensitive.exp: New file.
* lib/gdb.exp (gdb_test_multiple): Eror on newline in $message.
* gdb.base/ifelse.exp: Give names to the "" tests as `if true else
false #1', `if true else false #2' and `if true else false #3'.
* infrun.c (proceed): Do not single-step into signal delivery
when stepping off a breakpoint location.
(insert_step_resume_breakpoint_at_frame): Move prototype earlier.
(insert_step_resume_breakpoint_at_caller): Likewise.
(insert_step_resume_breakpoint_at_sal): Likewise.
(insert_longjmp_resume_breakpoint): Likewise.
testsuite/ChangeLog:
* gdb.base/annota1.exp: Accept breakpoints-invalid annotation
while delivering signal.
* elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by
!objfile_has_partial_symbols. New comment.
* objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if
SYM_READ_PSYMBOLS is not present. Extend the comment.
* symfile.h (struct sym_fns): Extend the sym_read_psymbols comment.
gdb/testsuite/
* gdb.base/gdbindex-stabs-dwarf.c: New file.
* gdb.base/gdbindex-stabs.c: New file.
* gdb.base/gdbindex-stabs.exp: New file.
* NEWS: Document the new gdbserver --once option.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
for disconnected tracing.
(Multi-Process Mode for @code{gdbserver}): Mention --multi and
extended-remote relationship. Mention --once.
(TCP port allocation lifecycle of @code{gdbserver}): New.
gdb/gdbserver/
* remote-utils.c (handle_accept_event): Close LISTEN_DESC only if
RUN_ONCE. Comment for the LISTEN_DESC delete_file_handler call.
(remote_prepare): New function with most of the TCP code from ...
(remote_open): ... here. Detect PORT here unconditionally. Move also
setting transport_is_reliable.
* server.c (run_once): New variable.
(gdbserver_usage): Document it.
(main): Set run_once for `--once'. Call remote_prepare. Exit after
the first run if RUN_ONCE.
* server.h (run_once, remote_prepare): New declarations.
gdb/testsuite/
* gdb.base/solib-disc.exp: Set gdbserver_reconnect_p.
* lib/gdb.exp (gdb_init): Clear gdbserver_reconnect_p.
* lib/gdbserver-support.exp (gdbserver_start): Add `--once' if
!gdbserver_reconnect_p..
(gdbserver_reconnect): Call error if !gdbserver_reconnect_p..
gdb/
* regcache.c (get_thread_arch_regcache): If creating a regcache for
null_ptid, assume and allow a NULL address space, instead of
asking the target for the ptid's address space.
* infrun.c (ptid_is_pid): Remove assertion.
gdb/testsuite/
* gdb.base/maint.exp: Test that "maint print registers" works
without a running program.
Fix libraries displacement if they change whether they were prelinked.
* solib-svr4.c (LM_ADDR_CHECK): Set L_ADDR even if the DYNAMIC pointer
does not match. Comment why.
gdb/testsuite/
* gdb.base/break-interp-lib.c (v, vptr): New variables.
* gdb.base/break-interp.exp (test_attach): New comment.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Do not check for
SEC_LOAD.
gdb/
Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip.
* elfread.c (elf_symfile_read): New variable synth_abfd, pass it to
bfd_get_synthetic_symtab.
* jit.c (jit_register_code): Pass NULL to the new parameter parent.
* machoread.c (macho_add_oso_symfile): Pass main_objfile to the new
parameter parent, remove the call to add_separate_debug_objfile.
* solib.c (solib_read_symbols): Pass NULL to the new parameter parent.
* symfile-mem.c (symbol_file_add_from_memory): Likewise.
* symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter
parent, new comment for it, call add_separate_debug_objfile for it.
(symbol_file_add_separate): Pass objfile as the parameter parent,
remove the call to add_separate_debug_objfile.
(symbol_file_add_from_bfd): New parameter parent, pass it.
(symbol_file_add): Pass NULL to the new parameter parent.
* symfile.h (symbol_file_add_from_bfd): New parameter parent.
gdb/testsuite/
* gdb.base/eu-strip-infcall.c: New file.
* gdb.base/eu-strip-infcall.exp: New file.
* elfread.c (elf_symtab_read): Do not ignore .L symbols if they are
BSF_SYNTHETIC.
gdb/testsuite/
* gdb.base/callfuncs.c (Lcallfunc, callfunc): New functions.
* gdb.base/callfuncs.exp (print callfunc (Lcallfunc, 5)): New test.
Support a ring of related breakpoints.
* breakpoint.c (watchpoint_del_at_next_stop): New, move here code from
other functions, add gdb_assert.
(update_watchpoint, watchpoint_check): Add gdb_assert. Use
watchpoint_del_at_next_stop.
(bpstat_check_watchpoint): Use watchpoint_del_at_next_stop.
(bpstat_stop_status): Handle ring in related_breakpoint.
(set_raw_breakpoint_without_location): Initialize ring in
related_breakpoint.
(delete_breakpoint): Handle ring in related_breakpoint, use
watchpoint_del_at_next_stop.
(map_breakpoint_numbers): Handle ring in related_breakpoint.
gdb/testsuite/
Support a ring of related breakpoints.
* gdb.base/watchpoint-delete.c: New file.
* gdb.base/watchpoint-delete.exp: New file.
* value.c (value_from_history_ref): New function.
* value.h (value_from_history_ref): Export.
* cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
to parse value history references.
* cli/cli-utils.h (get_number_trailer): Update comment.
2011-02-24 Michael Snyder <msnyder@vmware.com>
* gdb.base/break.exp: Add tests for delete breakpoints using
convenience variables and value history references.
* breakpoint.c (breakpoint_1): Change first argument from an int
to a char pointer, so that the function now accepts a list of
breakpoints rather than just one. Use new function
'number_is_in_list' to implement.
(breakpoints_info): Pass char * instead of int to breakpoint_1.
(watchpoints_info): Ditto.
(tracepoints_info): Ditto.
(maintenance_info_breakpoints): Ditto.
(_initialize_breakpoint): Update help strings to reflect the fact
that these functions can now take more than one argument.
* cli/cli-utils.c (number_is_in_list): New function.
* cli/cli-utils.h (number_is_in_list): Export.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.texinfo (Set Breaks): Add @dots{} to arguments of info break.
(Set Watchpoints): Add @dots{} to argument of info watchpoints.
(Listing Tracepoints): Add @dots{} to argument of info tracepoints.
2011-02-21 Michael Snyder <msnyder@vmware.com>
* gdb.base/break.exp: Add tests for "info break" with arguments.
* gdb.trace/infotrace.exp: Update patterns for error and help.
* gdb.base/completion.exp: Update pattern.
* gdb.base/ena-dis-br.exp: Update pattern.
* gdb.base/help.exp: Update patterns.
* command.h (enum command_class): New class 'no_set_class', for
"show" commands without a corresponding "set" command.
* value.c (_initialize_values): Use 'no_set_class' for "show values".
* copying.c (_initialize_copying): Ditto for "show copying" and
"show warranty".
* cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
"show version".
* cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
which there is no corresponding "set" command (eg. "show copying").
2011-02-14 Michael Snyder <msnyder@vmware.com>
* gdb.texinfo (threads): Document argument for "info threads" cmd.
Document new command "thread find".
2011-02-15 Michael Snyder <msnyder@vmware.com>
* gdb.base/default.exp: Add tests for thread commands.
* gdb.base/help.exp: Add tests for thread commands.
* gdb.threads/thread-find.exp: New test for thread find command.
2011-02-04 David Daney <ddaney@caviumnetworks.com>
* mips-linux-tdep.c: Include xml-syscall.h.
(mips_linux_get_syscall_number): New function.
(mips_linux_init_abi): Add calls to
mips_linux_get_syscall_number() and set_xml_syscall_file_name().
* data-directory/Makefile.in (SYSCALLS_FILES): Add
mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
* syscalls/mips-n32-linux.xml: New file.
* syscalls/mips-n64-linux.xml: New file.
* syscalls/mips-o32-linux.xml: New file.
gdb/testsuite/
2011-02-04 David Daney <ddaney@caviumnetworks.com>
* gdb.base/catch-syscall.exp: Enable for mips*-linux*.
Improve the ordering of line table entries when dealing with the end
of sequence markers. This will allow us to disassemble over the border
between two compile units while also displaying source code information.
Discovered by Pierre Muller.
gdb/ChangeLog:
* inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
value test.
gdb/testsuite/ChangeLog:
* gdb.base/interact.exp: Add extra tests that verify that
the value of the interactive-mode setting does not change
after the script is sourced.
Don't lose embedded_offset in printing routines throughout.
gdb/
* valprint.h (val_print_array_elements): Change prototype.
* valprint.c (val_print_array_elements): Add `embedded_offset'
parameter, and adjust to pass it down to val_print, while passing
`valaddr' or `address' unmodified. Take embedded_offset into
account when checking repetitions.
* c-valprint.c (c_val_print): Pass embedded_offset to
val_print_array_elements instead of adjusting `valaddr' and
`address'.
* m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
embedded_offset to val_print_array_elements instead of adjusting
`valaddr'.
* p-lang.h (pascal_object_print_value_fields): Adjust prototype.
* p-valprint.c (pascal_val_print): Pass embedded_offset to
val_print_array_elements and pascal_object_print_value_fields
instead of adjusting `valaddr'.
(pascal_object_print_value_fields): Add `offset' parameter, and
adjust to use it.
(pascal_object_print_value): Add `offset' parameter, and adjust to
use it.
(pascal_object_print_static_field): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* ada-valprint.c (val_print_packed_array_elements): Add `offset'
parameter, and adjust to use it. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(ada_val_print): Rename `valaddr0' parameter to `valaddr'.
(ada_val_print_array): Add `offset' parameter, and adjust to use
it.
(ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
`embedded_offset' to `offset'. Don't re-adjust `valaddr'.
Instead work with offsets. Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents. Change `defer_val_int' local type to CORE_ADDR,
and use value_from_pointer to extract a target pointer, rather
than value_from_longest.
(print_variant_part): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(ada_value_print): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
(print_record): Add `offset' parameter, and adjust to pass it
down.
(print_field_values): Add `offset' parameter. Replace
`outer_valaddr' parameter by a new `outer_offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
Use value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* d-valprint.c (dynamic_array_type): Use
value_contents_for_printing/value_embedded_offset, rather than
value_contents.
* jv-valprint.c (java_print_value_fields): Add `offset' parameter.
Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_print_value_fields): Take `offset' into account. Don't
re-adjust `valaddr'. Instead pass down adjusted offsets.
(java_val_print): Take `embedded_offset' into account. Pass it to
java_print_value_fields.
* f-valprint.c (f77_print_array_1): Add `embedded_offset'
parameter. Don't re-adjust `valaddr' or `address'. Instead pass
down adjusted offsets.
(f77_print_array): Add `embedded_offset' parameter. Pass it down.
(f_val_print): Take `embedded_offset' into account.
gdb/testsuite/
* gdb.base/printcmds.c (some_struct): New struct and instance.
* gdb.base/printcmds.exp (test_print_repeats_embedded_array): New
procedure.
<global scope>: Call it.
When interactive-mode is not auto, GDB always uses that setting to
determine whether to act as if the input stream is a terminal or not.
However, this setting should only be honored if the input stream is
the standard input stream. Otherwise, we run into trouble while
source-ing a GDB script, as shown below (on x86_64-linux):
% cat script
print 1
print 2
% gdb -q
(gdb) set interactive-mode on
(gdb) source script
(gdb) print 3
$1 = 3
The lack of output and the fact that the "print 3" command returned
a value saved in $1 (as opposed to $3) indicates that the script was
not even evaluated at all.
gdb/ChangeLog:
* top.c (input_from_terminal_p): Restrict the use of interactive_mode
to the case where instream is stdin.
gdb/testsuite/ChangeLog:
* gdb.base/interact.exp: New testcase.
Convert hardware watchpoints to use breakpoint_ops.
gdb/
* breakpoint.h (breakpoint_ops) <insert>: Rename to...
<insert_location>: ... this. Return int instead of void.
Accept pointer to struct bp_location instead of pointer to
struct breakpoint. Adapt all implementations.
(breakpoint_ops) <remove>: Rename to...
<remove_location>: ... this. Accept pointer to struct bp_location
instead of pointer to struct breakpoint. Adapt all implementations.
* breakpoint.c (insert_catchpoint): Delete function.
(insert_bp_location): Call the watchpoint or catchpoint's
breakpoint_ops.insert method.
(remove_breakpoint_1): Call the watchpoint or catchpoint's
breakpoint_ops.remove method.
(insert_watchpoint, remove_watchpoint): New functions.
(watchpoint_breakpoint_ops): New structure.
(watch_command_1): Initialize the OPS field.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
(inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
(inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
Delete functions.
(inf_child_target): Remove initialization of to_insert_fork_catchpoint,
to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
to_remove_exec_catchpoint and to_set_syscall_catchpoint.
* target.c (update_current_target): Change default implementation of
to_insert_fork_catchpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_insert_exec_catchpoint, to_remove_exec_catchpoint and
to_set_syscall_catchpoint to return_one.
(debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Report return value.
* target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
(to_insert_exec_catchpoint): Change declaration to return int instead
of void.
gdb/testsuite/
* gdb.base/foll-exec.exp: Adapt to new error string when the catchpoint
type is not supported.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
This file has been created prior to CVS rev 1. Instead of listing all
the years since 1999, I just put 1999, 2010 and 2011.
gdb/testsuite/ChangeLog:
* gdb.base/langs1.f: Add copyright header.
* frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
this_pc_in_block, morestack_msym and morestack_name. Check for
"__morestack" minimal symbol there.
gdb/testsuite/
* gdb.base/morestack.exp: New file.
* gdb.base/morestack.c: New file.
Fix step_resume_breakpoint unsaved during an infcall.
* gdbthread.h (struct thread_control_state): Move here field
step_resume_breakpoint ...
(struct thread_info): ... from here.
* infrun.c (save_infcall_control_state): Reset
control.step_resume_breakpoint to NULL.
(restore_infcall_control_state, discard_infcall_control_state): Delete
control.step_resume_breakpoint.
* arm-linux-tdep.c, infrun.c, thread.c: Update all the references to
the moved field.
gdb/testsuite/
Fix step_resume_breakpoint unsaved during an infcall.
* gdb.base/step-resume-infcall.exp: New file.
* gdb.base/step-resume-infcall.c: New file.
(gdb_expect_list): Add verbose -log call for each pattern.
* gdb.base/signals.exp (test_handle_all_print): Call it.
Reduce timeout increment from 6 minutes to 1 minute.
* gdb.server/ext-run.exp: Call it.
* breakpoint.c (watch_command_1): Get a pointer of the lazy
version of the expression's value, even if reading the value from
memory fails. When creating a -location watchpoint, get the
value's address from the lazy value pointer.
gdb/testsuite/
* gdb.base/watchpoint.exp: Test "watch -location" with an
innacessible location.
* gdb.base/maint.exp: Expect "." prefix.
* gdb.base/nodebug.exp: Expect "." Likewise.
* gdb.base/sepsymtab.exp: Expect "." Likewise.
* gdb.base/watchpoint-cond-gone.exp: Likewise.
* gdb.base/watchpoint.exp: Expect a software watch to be created for
POWER server processors.
New command "set directories".
* NEWS: Document them.
* source.c (set_directories_command): New function.
(show_directories_1): Renamed from show_directories.
All callers updated.
(show_directories_command): New function.
(_initialize_source): Install "directories" as a set/show
variable instead of just a show command.
doc/
* gdb.texinfo (Source Path): Document "set directories".
testsuite/
* gdb.base/help.exp: Update expected output.
* gdb.python/py-parameter.exp: New file.
* dwarf2read.c (read_array_type): Read the DW_AT_byte_size from the
DIE and set the length of the type.
* gdbtypes.h (get_array_bounds): Move here from valprint.h.
* gdbtypes.c (get_array_bounds): Move here from valprint.c and
return 0 if the corresponding bounds of the type are undefined.
* valprint.h (get_array_bounds): Move declaration to gdbtypes.h.
* valprint.c (get_array_bounds): Move implementation to gdbtypes.c.
(val_print_array_elements): Use get_array_bounds to compute the number
of array elements instead of dividing the length of the array by the
length of the element types.
* valarith.c (vector_binop): Likewise.
* valops.c (value_cast): Likewise.
* c-valprint.c (c_val_print): Likewise.
* c-typeprint.c (c_type_print_varspec_suffix): Likewise.
gdb/testsuite:
* gdb.base/gnu_vector.exp: Adjust expect messages.
* infrun.c (follow_exec): Replace symbol_file_add_main by
symbol_file_add with SYMFILE_DEFER_BP_RESET, set_initial_language and
breakpoint_re_set.
* m32r-rom.c (m32r_load, m32r_upload_command): Use parameter 0 for
clear_symtab_users.
* objfiles.c (free_all_objfiles): Likewise.
* remote-m32r-sdi.c (m32r_load): Likewise.
* solib-som.c (som_solib_create_inferior_hook): Likewise.
* symfile.c (new_symfile_objfile): New comment for add_flags. Call
clear_symtab_users with ADD_FLAGS.
(reread_symbols): Use parameter 0 for clear_symtab_users.
(clear_symtab_users): New parameter add_flags. Do not call
breakpoint_re_set if SYMFILE_DEFER_BP_RESET.
(clear_symtab_users_cleanup): Use parameter 0 for clear_symtab_users.
* symtab.h (clear_symtab_users): New parameter add_flags.
gdb/testsuite/
* gdb.base/pie-execl.exp: New file.
* gdb.base/pie-execl.c: New file.
Fix missing _start PIE relocation on ppc64 due to stop on dl_main.
* break-interp.exp (reach): Move the core body ...
(reach_1): ... here. Use stop-on-solib-events for _dl_debug_state.
(test_ld): Provide always real argument, even to the linker. Replace
dl_main by _dl_debug_state.
* Makefile.in (XML_SYSCALL_DIR, XML_SYSCALL_FILES): Moved to
data-directory/Makefile.in.
(SUBDIRS): Add data-directory.
(all): Remove xml-syscall-copy dependency.
(xml-syscall-copy): Moved to data-directory/Makefile.in as
stamp-syscalls.
(xml-syscall-install): Moved to data-directory/Makefile.in as
install-syscalls.
(install-only): Remove xml-syscall-install dependency.
(all-data-directory): New rule.
(data-directory/Makefile): New rule.
* configure.ac (AC_OUTPUT): Add data-directory/Makefile.
* configure: Regenerate.
* data-directory/Makefile.in: New file.
* python/lib/gdb/__init__.py: New file.
testsuite/
* gdb.base/catch-syscall.exp (do_syscall_tests): Update location
of syscall staging area.
* value.c (value_primitive_field): Take 'offset' into account for
packed field.
gdb/testsuite
* gdb.base/anon.exp: New file.
* gdb.base/anon.c: New file.
PR corefiles/12071.
* inferior.c (have_live_inferiors): New variables old_chain, inf and
tp. Iterate INFERIOR_LIST and call target_has_execution.
gdb/testsuite/
PR corefiles/12071.
* gdb.base/corefile.exp (quit with a process, no question: load core)
(quit with a core file): New tests.
Fix lost siginfo_t for inferior calls.
* infrun.c
(struct inferior_thread_state) <siginfo_gdbarch, siginfo_data>: New.
(save_inferior_thread_state): New variables regcache, gdbarch and
siginfo_data. Initialize SIGINFO_DATA if gdbarch_get_siginfo_type_p.
Move INF_STATE allocation later, pre-clear it. Initialize REGISTERS
using REGCACHE.
(restore_inferior_thread_state): New variables regcache and gdbarch.
Restore SIGINFO_DATA for matching GDBARCH. Restore REGISTERS using
REGCACHE. Free also SIGINFO_DATA.
gdb/testsuite/
Fix lost siginfo_t for inferior calls.
* gdb.base/siginfo-infcall.exp: New file.
* gdb.base/siginfo-infcall.c: New file.
* gdb.base/printcmds.exp (test_float_accepted): Import gdb_prompt.
Move here, negate and extend by XFAIL the "p 0x1.1" test from ...
(test_float_rejected): ... here.
* gdb.java/jv-print.exp (test_float_accepted): Import gdb_prompt.
Move here, negate and extend by XFAIL the "p 0x1.1" test from ...
(test_float_rejected): ... here.
* gdb.objc/print.exp (test_float_accepted): Import gdb_prompt.
Move here, negate and extend by XFAIL the "p 0x1.1" test from ...
(test_float_rejected): ... here.
* gdb.pascal/print.exp (test_float_accepted): Import gdb_prompt.
Move here, negate and extend by XFAIL the "p 0x1.1" test from ...
(test_float_rejected): ... here.
value specially.
testsuite/
* gdb.base/watchpoint.exp: Call test_inaccessible_watchpoint
before disabling hardware watchpoints.
(test_inaccessible_watchpoint): Check that hardware watchpoints
are used. Test for watchpoints on a constant address.
* breakpoint.c (save_breakpoints): Use RETURN_MASK_ALL.
* cli-out.c: Include vec.h.
(cli_field_fmt, cli_spaces, cli_text, cli_message, cli_flush): New
variable stream, initialize it, use it.
(cli_redirect): New function comment. Replace the stream and
original_stream fields by the new streams field. Remove the
original_stream != NULL conditional, assert error on NULL instead.
(out_field_fmt, field_separator): New variable stream, initialize it, use it.
(cli_out_data_ctor): Assert non-NULL stream. Replace the stream and
original_stream fields by the new streams field.
(cli_out_set_stream): Replace the stream field by the new streams
field.
* cli-out.h: Include vec.h.
(ui_filep): New typedef, call DEF_VEC_P for it.
(struct cli_ui_out_data): Replace the stream and original_stream
fields by the new streams field.
* cli/cli-logging.c (set_logging_redirect): Call ui_out_redirect with
NULL first. Extend the comment.
(handle_redirections): Call ui_out_redirect with output.
* python/py-breakpoint.c (bppy_get_commands): Move ui_out_redirect
calls outside of the TRY_CATCH block.
gdb/testsuite/
* gdb.base/ui-redirect.exp: New file.
* gdb.base/callfuncs.exp (set_lang_c): Delete, set c language directly.
* gdb.base/printcmds.exp (set_lang_c): Delete, set c language directly.
Simplify, early exit if runto_main fails.
* gdb.fortran/exprs.exp: load_lib fortran.exp.
(set_lang_fortran): Moved to lib/fortran.exp.
* gdb.fortran/types.exp: load_lib fortran.exp.
(set_lang_fortran): Moved to lib/fortran.exp.
* gdb.java/jmisc.exp (set_lang_java): Moved to lib/java.exp.
* gdb.java/jprint.exp (set_lang_java): Ditto.
* gdb.java/jv-exp.exp: load_lib java.exp.
If set_lang_java fails, issue a warning instead of failure to be
consistent with other set_lang_foo uses.
(set_lang_java): Moved to lib/java.exp.
* gdb.java/jv-print.exp (set_lang_java): Moved to lib/java.exp.
If set_lang_java fails, issue a warning instead of failure to be
consistent with other set_lang_foo uses.
* gdb.pascal/types.exp: load_lib pascal.exp.
(set_lang_pascal): Moved to lib/pascal.exp.
* lib/fortran.exp: New file.
* lib/java.exp (set_lang_java): New function.
* lib/pascal.exp (set_lang_pascal): New function.
2010-08-17 Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* breakpoint.c (breakpoint_init_inferior): Decrement the
location's reference count instead of deleting right away.
(bpstat_free): Decrement the location's reference count. Make
static.
(bpstat_copy): Increment the location's reference count.
(bpstat_find_breakpoint): Adjust.
(bpstat_num): Adjust.
(print_it_typical): Adjust. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_alloc): Remove const qualifier from the 'bl' parameter.
Adjust to record the location's owner in the bpstat.
(watchpoint_check): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(bpstat_check_breakpoint_conditions): Don't handle
bp_watchpoint_scope here. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_stop_status): Defer inferior function calls to after
building the bpstat list. Handle bp_watchpoint_scope here. Use
the breakpoint pointer in the bpstat instead of the location's
owner.
(bpstat_what): Use the breakpoint pointer in the bpstat instead of
the location's owner.
(free_bp_location): Don't walk bpstats clearing locations.
(incref_bp_location): New.
(decref_bp_location): New.
(breakpoint_auto_delete): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(update_global_location_list): Clear the location's owner, and
decrement the location's reference count instead of deleting it
right away.
(breakpoint_retire_moribund): Decrement the location's reference
count instead of deleting it right away.
(bpstat_remove_bp_location): Delete.
(bpstat_remove_breakpoint): New.
(bpstat_remove_bp_location_callback): Delete.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Iterate over all threads' stop_bpstat's
clearing references to the breakpoint that is being deleted.
* breakpoint.h (struct bp_location) <refc>: New field.
<owner>: Update comments.
(bpstat_free): Delete declaration.
(struct bpstats): Change the type of the breakpoint_at field to
struct breakpoint point, from struct bp_location pointer. Add new
field bp_location_at.
gdb/testsuite/
2010-08-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* gdb.base/watch-cond-infcall.exp: New file.
* gdb.base/watch-cond-infcall.c: New file.
* symfile.c (addr_section_name): New function.
(addrs_section_compar): Use it.
(addr_info_make_relative): Use it. Move variable sect_name into a more
inner block. Make ".dynbss" and ".sdynbss" checks more strict.
gdb/testsuite/
* gdb.base/prelink-lib.c (copyreloc): New initialized variable.
* gdb.base/prelink.c (copyreloc, bssvar, bssvarp): New variables.
(main): Use copyreloc.
* gdb.base/prelink.exp (split debug of executable)
(.dynbss vs. .bss address shift): New tests.
(test): Use it.
(test2): Use it.
* gdb.python/py-inferior.c (int8_search_buf, int16_search_buf)
(int32_search_buf, int64_search_buf): No longer static.
(x): Remove.
* gdb.base/relocate.c (hack): New function.
* symfile.c (find_separate_debug_file_by_debuglink): Remove
a gdb_assert call, new comment.
gdb/testsuite/
* gdb.base/solib-nodir.exp: New file.
* lib/gdb.exp (runto): New case for a GDB internal error.
* gdb.base/charset-malloc.c: New file.
* gdb.base/charset.c (malloc_stub): New prototype.
(main): Call it instead of malloc itself.
* gdb.base/charset.exp: Use only prepare_for_testing.
(binfile): Remove the variable.
Make core files the process_stratum.
* corefile.c (core_target): New variable.
(core_file_command): Remove variable t, use core_target.
* corelow.c (core_ops): Make it static.
(init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
* defs.h (make_cleanup_unpush_target): New prototype.
* gdbarch.h: Regenerate.
* gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
* gdbcore.h (core_target): New declaration.
* inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
variables ops_already_pushed and back_to. Use push_target,
make_cleanup_unpush_target and discard_cleanups calls.
* record.c (record_open): Replace core_stratum by a core_bfd check.
* target.c (target_is_pushed): New function.
(find_core_target): Remove.
* target.h (enum strata) <core_stratum>: Remove.
(target_is_pushed): New declaration.
(find_core_target): Remove declaration.
* tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
* utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
gdb/doc/
Make core files the process_stratum.
* gdb.texinfo (Active Targets): Remove core_stratum. Include
record_stratum example.
gdb/testsuite/
Make core files the process_stratum.
* gdb.base/corefile.exp (run: load core again)
(run: sanity check we see the core file, run: with core)
(run: core file is cleared, attach: load core again)
(attach: sanity check we see the core file, attach: with core)
(attach: core file is cleared): New tests.
* gdb.base/coremaker.c (main): New parameters. Implement "sleep" argv.
Fix re-run of PIE executable, PR shlibs/11776.
* solib-svr4.c (svr4_relocate_main_executable) <symfile_objfile>: Remove
the part of pre-set SYMFILE_OBJFILE->SECTION_OFFSETS.
gdb/testsuite/
Fix re-run of PIE executable, PR shlibs/11776.
* gdb.base/break-interp.exp (test_ld): Turn off "disable-randomization".
Remove $displacement_main to match the solib-svr4.c change. New "kill"
and re-"run" of the inferior.
* gdb.base/attach-pie-misread.exp: Load prelink-support.exp. Replace
build_executable by build_executable_own_libs. Replace "prelink -R"
execution by a call of prelink_yes. Comment why "prelink -r" needs no
change.
* gdb.base/break-interp.exp: Load prelink-support.exp. Rename calls of
copy to file_copy. Move setting opts --dynamic-linker and -rpath,
mkdir $dir and ldd its parsing and copying to lib/prelink-support.exp.
Replace build_executable by build_executable_own_libs's function
build_executable_own_libs.
(prelinkNO): Create new stub to call prelink_no.
(prelinkYES): Create new stub to call prelink_yes.
(test_attach): Rename calls of copy to file_copy.
(section_get, prelinkNO_run, prelinkNO, prelinkYES, symlink_resolve)
(copy): Move to ...
* lib/prelink-support.exp: ... a new file. Rename prelinkNO to
prelink_no, prelinkYES to prelink_yes, copy to file_copy.
* gdb.base/prelink.exp: Disable testcase also for is_remote and
skip_shlib_tests. Load prelink-support.exp. Replace gdb_compile with
special flags by gdb_compile_shlib. Replace second gdb_compile by
build_executable_own_libs. Replace "prelink -R" execution by a call of
prelink_yes. Replace "prelink -u" and second "prelink -R" execution by
a second call of prelink_yes. Replace restart commands by
clean_restart.
(prelink): Rename to ...
(seen displacement message): ... this test. Extend its expectation
strictness.
Fix attaching to PIEs prelinked on the disk after the process was
started.
* solib-svr4.c (svr4_exec_displacement): New variable arch_size.
Verify it against bfd_get_arch_size. Try to match arbitrary
displacement for the phdrs comparison.
gdb/testsuite/
* gdb.base/break-interp.exp: Run $binpie with new value "ATTACH", new
code for it. New variable relink_args.
(prelinkYES): Call prelinkNO.
(test_attach): Accept new parameter relink_args. Re-prelink the binary
in such case. Move the core code to ...
(test_attach_gdb): ... a new function. Send GDB command "file".
Extend expected "Attaching to " string.
2010-06-16 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* breakpoint.c: Include parser-defs.h.
(watchpoint_exp_is_const): New function.
(watch_command_1): Call watchpoint_exp_is_const to check
if the expression is constant.
gdb/doc/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo: Include information about the correct use
of addresses in the `watch' command.
gdb/testsuite/ChangeLog:
2010-06-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/watch-notconst.c: New file.
* gdb.base/watch-notconst.S: New file.
* gdb.base/watch-notconst2.c: New file.
* gdb.base/watch-notconst2.S: New file.
* gdb.base/watch-notconst.exp: New file.
* gdb.base/watchpoint.c (global_ptr_ptr): New variable.
(func4): Add operations on `global_ptr_ptr'.
* gdb.base/watchpoint.exp (test_constant_watchpoint): New
routine to test watchpoints created with a constant expression.
(test_inaccessible_watchpoint): Include tests for watchpoints
created with a constant expression.
Add per-operation permission flags.
* target.h (struct target_ops): New method to_set_permissions.
(target_set_permissions): New macro.
(target_insert_breakpoint): Change macro to function.
(target_remove_breakpoint): Ditto.
(target_stop): Ditto.
(may_write_registers): Declare.
(may_write_memory): Declare.
(may_insert_breakpoints): Declare.
(may_insert_tracepoints): Declare.
(may_insert_fast_tracepoints): Declare.
(may_stop): Declare.
* target.c (may_write_registers, may_write_registers_1): New globals.
(may_write_memory, may_write_memory_1): New globals.
(may_insert_breakpoints, may_insert_breakpoints_1): New globals.
(may_insert_tracepoints, may_insert_tracepoints_1): New globals.
(may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
globals.
(may_stop, may_stop_1): New global.
(target_xfer_partial): Test for write permission.
(target_store_registers): Ditto.
(target_insert_breakpoint): New function.
(target_remove_breakpoint): New function.
(target_stop): New function.
(_initialize_targets): Add new set/show variables.
(set_write_memory_permission): New function.
(update_target_permissions): New function.
(set_target_permissions): New function.
(update_current_target): Default to_set_permissions.
(_initialize_targets): Use new globals and setter function.
* tracepoint.c (start_tracing): Test for permission.
* inferior.h (update_observer_mode): Declare.
* infrun.c (non_stop_1): Define earlier.
(observer_mode, observer_mode_1): New globals.
(set_observer_mode, show_observer_mode): New functions.
(update_observer_mode): New function.
(_initialize_infrun): Define "set observer" command.
* remote.c (PACKET_QAllow): New optional packet.
(remote_protocol_features): Add QAllow.
(remote_set_permissions): New function.
(remote_start_remote): Call it.
(init_remote_ops): Add it to target vector.
(_initialize_remote): Add config command for QAllow.
* gdb.texinfo (Observer Mode): New section.
(General Query Packets): Document QAllow.
* gdb.base/permissions.exp: New file.
* breakpoint.c (breakpoint_restore_shadows): New OWNER comment.
(should_be_inserted): Return zero also on NULL OWNER.
(breakpoint_program_space_exit): New OWNER comment.
(insert_breakpoint_locations): Extend comment for OWNER.
(remove_breakpoint_1, remove_breakpoint): Assert on OWNER.
(breakpoint_init_inferior, breakpoint_here_p, breakpoint_thread_match):
New OWNER comment.
(print_it_typical): Return PRINT_UNKNOWN on NULL OWNER.
(watchpoint_check): New assert on BREAKPOINT_AT and OWNER.
(bpstat_check_location): New assert on OWNER.
(bpstat_check_watchpoint, bpstat_check_breakpoint_conditions): Move BL
and B initializations to the code block. New assert on them.
(print_one_breakpoint_location): New OWNER comment.
(watchpoint_locations_match): Assert on OWNER.
(breakpoint_locations_match): Move HW_POINT1 and HW_POINT2
initializations to the code block. New assert on OWNER.
(set_breakpoint_location_function): New assert on OWNER.
(disable_breakpoints_in_shlibs, disable_breakpoints_in_unloaded_shlib)
(bp_location_compare, update_global_location_list)
(update_global_location_list): New OWNER comment.
gdb/testsuite/
* gdb.base/moribund-step.exp: New.
This is something that Michael spotted and reported to me. Definitely
a mistake, causing the test to report no status...
gdb/testsuite:
2010-05-31 Joel Brobecker <brobecker@adacore.com>
* gdb.base/subst.exp: Fix call to gdb_test with empty message.
Tested on x86_64-linux. The test now reports 30 PASSes instead of 29.
2010-05-17 Joel Brobecker <brobecker@adacore.com>
* gdb.base/gdb11530.exp: Delete setting of prms_id and bug_id.
* gdb.cp/koenig.exp: Likewise.
Tested on x86_64-linux.
PR exp/11530.
* gdbtypes.c (lookup_struct_elt_type): Also lookup
names of unnamed structures or unions.
testsuite ChangeLog entry:
2010-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
PR exp/11530.
* testsuite/gdb.base/gdb11530.c: New file.
* testsuite/gdb.base/gdb11530.exp: New file.
* gdb.base/break-interp.exp: Remove $exec.debug safety removal.
* gdb.base/sepdebug.exp: Remove .debug subdirectory handling. New
variable different_dir. Move debugfile into a full directory pathname
under DIFFERENT_DIR.
* lib/gdb.exp (separate_debug_filename): Remove.
(gdb_gnu_strip_debug): No longer call separate_debug_filename. Remove
variable debug_dir and mkdir of it. Update function comments.
* cli/cli-decode.c (complete_on_cmdlist): Make two passes over the
command list.
gdb/testsuite
* gdb.base/completion.exp: Add tests for completion and deprecated
commands.
Fix deadlock on looped list of loaded shared objects.
* solib-svr4.c (LM_PREV): New function.
(IGNORE_FIRST_LINK_MAP_ENTRY): Use it.
(svr4_current_sos): Check for correct l_prev. New variables prev_lm
and next_lm. Clear prev_lm for solib_svr4_r_ldsomap.
* config/djgpp/fnchange.lst: Add translation for solib-corrupted.exp.
gdb/testsuite/
Fix deadlock on looped list of loaded shared objects.
* gdb.base/solib-corrupted.exp: New.
Fix crashes on dangling display expressions.
* ada-lang.c (ada_operator_check): New function.
(ada_exp_descriptor): Fill-in the field operator_check.
* c-lang.c (exp_descriptor_c): Fill-in the field operator_check.
* jv-lang.c (exp_descriptor_java): Likewise.
* m2-lang.c (exp_descriptor_modula2): Likewise.
* scm-lang.c (exp_descriptor_scm): Likewise.
* parse.c (exp_descriptor_standard): Likewise.
(operator_check_standard): New function.
(exp_iterate, exp_uses_objfile_iter, exp_uses_objfile): New functions.
* parser-defs.h (struct exp_descriptor): New field operator_check.
(operator_check_standard, exp_uses_objfile): New declarations.
* printcmd.c: Remove the inclusion of solib.h.
(display_uses_solib_p): Remove the function.
(clear_dangling_display_expressions): Call lookup_objfile_from_block
and exp_uses_objfile instead of display_uses_solib_p.
* solist.h (struct so_list) <objfile>: New comment.
* symtab.c (lookup_objfile_from_block): Remove the static qualifier.
* symtab.h (lookup_objfile_from_block): New declaration.
(struct general_symbol_info) <obj_section>: Extend the comment.
gdb/testsuite/
Fix crashes on dangling display expressions.
* gdb.base/solib-display.exp: Call gdb_gnu_strip_debug if LIBSEPDEBUG
is SEP.
(lib_flags): Remove the "debug" keyword.
(libsepdebug): New variable for iterating new loop.
(save_pf_prefix): New variable wrapping the loop.
(sep_lib_flags): New variable derived from LIB_FLAGS. Use it.
* lib/gdb.exp (gdb_gnu_strip_debug): Document the return code.
* gdbtypes.h (builtin_type): Add builtin_char16 and builtin_char32
fields.
* gdbtypes.c (gdbtypes_post_init): Set builtin_char16 and
builtin_char32 fields.
* printcmd.c (decode_format): Set char size to '\0'
for strings unless explicit size is given.
(print_formatted): Correct calculation of NEXT_ADDRESS
for 16 or 32 bit strings.
(do_examine): Do not force byte size for strings.
Use builtin_char16 and builtin_char32 types to display
16 or 32 bit-wide strings.
(x_command): Set LAST_SIZE to 'b' for string type.
gdb/doc ChangeLog
* gdb.texinfo (Examining memory): Update for
change in string display with explicit size.
gdb/testsuite ChangeLog
* gdb.base/charset.c (Strin16, String32): New variables.
* gdb.base/charset.exp (gdb_test): Test correct display
of 16 or 32 bit strings.
* gdb.base/solib-display.exp: Replace gdb_exit, gdb_start,
gdb_reinitialize_dir and gdb_load by clean_restart. Remove trailing
gdb_exit and return.
(executable): New variable.
(binfile): Use it.
Nathan Sidwell <nathan@codesourcery.com>
* breakpoint.c (breakpoint_1): Add filter argument, return number of
breakpoints printed.
(is_hardware_watchpoint): Make argument const.
(is_watchpoint): Ditto.
(is_tracepoint): Merge of tracepoint_type and breakpoint_is_tracepoint,
use it everywhere.
(breakpoints_info): Pass NULL to breakpoint_1.
(maintenance_info_breakpoints): Ditto.
(watchpoints_info): New function.
(tracepoints_info): Use breakpoint_1 filter.
(set_ignore_count): Warn that tracepoint ignore count will be ignored.
(_initialize_breakpoint): Make "info watchpoints" its own command.
* breakpoint.h (is_tracepoint): Rename from breakpoint_is_tracepoint.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Use is_tracepoint.
* gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
(Setting Watchpoints): Update description of "info watch".
(Disabling Breakpoints): Only "info break" lists all.
* gdb.base/completion.exp: Update for new "info watchpoints".
* gdb.base/default.exp: Ditto.
* gdb.base/help.exp: Ditto.
* gdb.base/watchpoint.exp: Ditto.
* gdb.trace/infotrace.exp: Update "info tracpoints" output.
