Commit graph

2610 commits

Author SHA1 Message Date
John Baldwin
a3405d124e Consolidate x86 debug register code for BSD native targets.
Move the debug register support code from amd64bsd-nat.c and
i386bsd-nat.c into a shared x86bsd-nat.c.

Instead of setting up x86_dr_low in amd64fbsd-nat.c and
i386fbsd-nat.c, add a x86bsd_target function that creates a new target
that inherits from inf_ptrace and sets up x86 debug registers if
supported.  In addition to initializing x86_dr_low, the x86bsd target
installs a custom mourn_inferior target operation to clean up the
x86 debug register state.  Previously this was only done on amd64.
Now it will be done for both i386 and amd64.  The i386bsd_target and
amd64bsd_target functions create targets that inherit from x86bsd
rather than inf_ptrace.

gdb/ChangeLog:

	* Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
	'x86bsd-nat.h'.
	* amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
	'amd64bsd-nat.h'.
	(amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
	(amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
	with 'x86bsd_xsave_len'.
	(amd64bsd_store_inferior_registers): Likewise.
	(amd64bsd_target): Inherit from x86bsd_target.
	(amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
	(amd64bsd_dr_set): Likewise.
	(amd64bsd_dr_set_control): Likewise.
	(amd64bsd_dr_set_addr): Likewise.
	(amd64bsd_dr_get_addr): Likewise.
	(amd64bsd_dr_get_status): Likewise.
	(amd64bsd_dr_get_control): Likewise.
	* amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
	'amd64bsd-nat.h'.
	(super_mourn_inferior): Move to x86bsd-nat.c.
	(amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
	(amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
	'x86bsd_xsave_len'.
	(_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
	mourn_inferior' target op.
	* config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
	* config/i386/fbsd64.mh: Likewise.
	* config/i386/nbsd64.mh: Likewise.
	* config/i386/nbsdelf.mh: Likewise.
	* config/i386/obsd.mh: Likewise.
	* config/i386/obsd64.mh: Likewise.
	* i386bsd-nat.c: Include 'x86bsd-nat.h'.
	(i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
	(i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
	with 'x86bsd_xsave_len'.
	(i386bsd_store_inferior_registers): Likewise.
	(i386bsd_target): Inherit from x86bsd_target.
	(i386bsd_dr_get): Rename and move to x86bsd-nat.c.
	(i386bsd_dr_set): Likewise.
	(i386bsd_dr_set_control): Likewise.
	(i386bsd_dr_set_addr): Likewise.
	(i386bsd_dr_get_addr): Likewise.
	(i386bsd_dr_get_status): Likewise.
	(i386bsd_dr_get_control): Likewise.
	* i386bsd-nat.h (i386bsd_xsave_len): Remove.
	(i386bsd_dr_set_control): Remove.
	(i386bsd_dr_set_addr): Remove.
	(i386bsd_dr_get_addr): Remove.
	(i386bsd_dr_get_status): Remove.
	(i386bsd_dr_get_control): Remove.
	* i386fbsd-nat.c: Include 'x86bsd-nat.h'.
	(i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
	'x86bsd_xsave_len'.
	(_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
	mourn_inferior' target op.
	* x86bsd-nat.c: New file.
	* x86bsd-nat.h: New file.
2016-07-01 07:00:38 -07:00
Walfred Tedeschi
93813b37c8 Merge gdb and gdbserver implementations for siginfo
Extract the compatible siginfo handling from amd64-linux-nat.c and
gdbserver/linux-x86-low to a new file nat/amd64-linux-siginfo.c.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

gdb/ChangeLog:

	* nat/amd64-linux-siginfo.c: New file.
	* nat/amd64-linux-siginfo.h: New file.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
	(amd64-linux-siginfo.o): New rule.
	* config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
	* amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
	(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
	(compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
	(compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
	(cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
	(cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
	(cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.

gdb/gdbserver/ChangeLog:

	* configure.srv (x86_64-*-linux*): Add amd64-linux-siginfo.o
	to srv_tgtobj.
	(i[34567]86-*-linux*): Add amd64-linux-siginfo.o
	to srv_tgtobj.
	* linux-x86-low.c [__x86_64__]: Include
	"nat/amd64-linux-siginfo.h".
	(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
	(compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
	(compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
	(cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
	(cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
	(cpt_si_fd, si_timerid, si_overrun): Move from
	nat/amd64-linux-siginfo.c.
	* Makefile.in (amd64-linux-siginfo.o:): New rule.
2016-02-02 11:42:56 +01:00
Joel Brobecker
305e13e67f Fix regression introduced in "break *<EXPR>" by explicit location patches.
A relatively recent patch support for explicit locations, and part
of that patch cleaned up the way we parse breakpoint locations.
Unfortunatly, a small regression crept in for "*<EXPR>" breakpoint
locations. In particular, on PIE programs, one can see the issue by
doing the following, with any program:

    (gdb) b *main
    Breakpoint 1 at 0x51a: file hello.c, line 3.
    (gdb) run
    Starting program: /[...]/hello
    Error in re-setting breakpoint 1: Warning:
    Cannot insert breakpoint 1.
    Cannot access memory at address 0x51a

    Warning:
    Cannot insert breakpoint 1.
    Cannot access memory at address 0x51a

Just for the record, this regression was introduced by:

    commit a06efdd6ef
    Date:   Tue Aug 11 17:09:35 2015 -0700
    Subject: Explicit locations: introduce address locations

What happens is that the patch makes the implicit assumption that
the address computed the first time is static, as if it was designed
to only support litteral expressions (Eg. "*0x1234"). This allows
the shortcut of not re-computing the breakpoint location's address
when re-setting breakpoints.

However, this does not work in general, as demonstrated in the example
above.

This patch plugs that hole simply by saving the original expression
used to compute the address as part of the address location, so as
to then re-evaluate that expression during breakpoint re-set.

gdb/ChangeLog:

        * location.h (new_address_location): Add new parameters
        "addr_string" and "addr_string_len".
        (get_address_string_location): Add declaration.
        * location.c (new_address_location): Add new parameters
        "addr_string" and "addr_string_len".  If not NULL, store
        a copy of the addr_string in the new location as well.
        (get_address_string_location): New function.
        (string_to_event_location): Update call to new_address_location.
        * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
        Save the event location in the parser's state before
        passing it to convert_address_location_to_sals.
        * breakpoint.c (create_thread_event_breakpoint): Update call
        to new_address_location.
        (init_breakpoint_sal): Get the event location's string, if any,
        and use it to update call to new_address_location.
        * python/py-finishbreakpoint.c (bpfinishpy_init):
        Update call to new_address_location.
        * spu-tdep.c (spu_catch_start): Likewise.

        * config/djgpp/fnchange.lst: Add entries for
        gdb/testsuite/gdb.base/break-fun-addr1.c and
        gdb/testsuite/gdb.base/break-fun-addr2.c.

gdb/testsuite/ChangeLog:

        * gdb.base/break-fun-addr.exp: New file.
        * gdb.base/break-fun-addr1.c: New file.
        * gdb.base/break-fun-addr2.c: New file.
2016-01-21 14:23:15 +04:00
Joel Brobecker
618f726fcb GDB copyright headers update after running GDB's copyright.py script.
gdb/ChangeLog:

        Update year range in copyright notice of all files.
2016-01-01 08:43:22 +04:00
Joel Brobecker
0f7b3ef4dc Rotate the GDB ChangeLog
Per GDB the "Start of New Year Procedure", this patch
  - renames the current ChangeLog into ChangeLog-2015;
  - starts a new ChangeLog file.

gdb/ChangeLog:

        * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.
2016-01-01 08:19:16 +04:00
Yao Qi
db3cb7cb3e Move aarch64_linux_prepare_to_resume to nat/aarch64-linux.c
gdb:

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* Makefile.in (aarch64-liunx.o): New rule.
	(HFILES_NO_SRCDIR): Add aarch64-linux.h.
	* config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux.o.
	* aarch64-linux-nat.c: Include nat/aarch64-linux.h.
	* aarch64-linux-nat.c (aarch64_get_debug_reg_state): Make it
	extern.
	(aarch64_linux_prepare_to_resume): Move it nat/aarch64-linux.c.
	* nat/aarch64-linux-hw-point.h (aarch64_debug_reg_state): Declare
	* nat/aarch64-linux.c: New file.
	* nat/aarch64-linux.h: New file.

gdb/gdbserver:

2015-08-25  Yao Qi  <yao.qi@linaro.org>

	* Makefile.in (aarch64-linux.o): New rule.
	* configure.srv (aarch64*-*-linux*): Append aarch64-linux.o to
	srv_tgtobj.
	* linux-aarch64-low.c: Include nat/aarch64-linux.h.
	(aarch64_init_debug_reg_state): Make it extern.
	(aarch64_linux_prepare_to_resume): Remove.
2015-08-25 11:39:14 +01:00
Yao Qi
554717a3ed Move common aarch64 HW breakpoint/watchpoint code to nat/
When I look at test fails related to watchpoint on aarch64-linux,
I find there are some code duplicates between GDB and GDBserver.
This patch is to move some of them to a nat/aarch64-linux-hw-point.{h,c}.

The only change I do is about the dr_changed_t typedef, which was
ULONGEST in GDB and 'unsigned long long' in GDBserver.  Each bit
of dr_changed_t represents a status of each HW breakpoint or
watchpoint register, and the max number of HW breakpoint or watchpoint
registers is 16, so the width of 'unsigned long long' is sufficient.

gdb:

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* Makefile.in (HFILES_NO_SRCDIR): Add
	nat/aarch64-linux-hw-point.h.
	(aarch64-linux-hw-point.o): New rule.
	* nat/aarch64-linux-hw-point.h: New file.
	* nat/aarch64-linux-hw-point.c: New file.
	* aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
	(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
	(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
	(AARCH64_HWP_ALIGNMENT): Likewise.
	(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
	(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
	(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
	(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
	(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
	(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
	(struct aarch64_debug_reg_state): Likewise.
	(struct arch_lwp_info):	Likewise.
	(aarch64_linux_set_debug_regs): Likewise.
	(aarch64_notify_debug_reg_change): Remove static.
	(aarch64_align_watchpoint): Likewise.
	(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
	(aarch64_watchpoint_length): Likewise.
	(aarch64_point_encode_ctrl_reg): Likewise
	(aarch64_point_is_aligned): Likewise.
	(aarch64_dr_state_insert_one_point): Likewise.
	(aarch64_dr_state_remove_one_point): Likewise.
	(aarch64_handle_breakpoint): Likewise.
	(aarch64_handle_aligned_watchpoint): Likewise.
	(aarch64_handle_unaligned_watchpoint): Likewise.
	(aarch64_handle_watchpoint): Likewise.
	* config/aarch64/linux.mh (NAT_FILE): Add
	aarch64-linux-hw-point.o.

gdb/gdbserver:

2015-07-17  Yao Qi  <yao.qi@linaro.org>

	* Makefile.in (aarch64-linux-hw-point.o): New rule.
	* configure.srv (srv_tgtobj): Append aarch64-linux-hw-point.o.
	* linux-aarch64-low.c: Include nat/aarch64-linux-hw-point.h.
	(AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
	(AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
	(AARCH64_HWP_ALIGNMENT): Likewise.
	(AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
	(AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
	(aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
	(AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
	(DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
	(DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
	(struct aarch64_debug_reg_state): Likewise.
	(struct arch_lwp_info):	Likewise.
	(aarch64_align_watchpoint): Likewise.
	(DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
	(aarch64_watchpoint_length): Likewise.
	(aarch64_point_encode_ctrl_reg): Likewise
	(aarch64_point_is_aligned): Likewise.
	(aarch64_align_watchpoint): Likewise.
	(aarch64_linux_set_debug_regs):
	(aarch64_dr_state_insert_one_point): Likewise.
	(aarch64_dr_state_remove_one_point): Likewise.
	(aarch64_handle_breakpoint): Likewise.
	(aarch64_handle_aligned_watchpoint): Likewise.
	(aarch64_handle_unaligned_watchpoint): Likewise.
	(aarch64_handle_watchpoint): Likewise.
2015-07-17 14:32:40 +01:00
Jan Kratochvil
db1ff28b60 Revert the previous 7 commits of: Validate binary before use
ddc98fbf2f Create empty nat/linux-maps.[ch] and common/target-utils.[ch]
6e5b4429db Move gdb_regex* to common/
f7af1fcd75 Prepare linux_find_memory_regions_full & co. for move
9904185cfd Move linux_find_memory_regions_full & co.
700ca40f6f gdbserver build-id attribute generator
ca5268b6be Validate symbol file using build-id
0a94970d66 Tests for validate symbol file using build-id

gdb/ChangeLog
2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert the previous 6 commits:
	Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
	Move gdb_regex* to common/
	Prepare linux_find_memory_regions_full & co. for move
	Move linux_find_memory_regions_full & co.
	gdbserver build-id attribute generator
	Validate symbol file using build-id

gdb/gdbserver/ChangeLog
2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert the previous 3 commits:
	Move gdb_regex* to common/
	Move linux_find_memory_regions_full & co.
	gdbserver build-id attribute generator

gdb/doc/ChangeLog
2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert the previous 2 commits:
	gdbserver build-id attribute generator
	Validate symbol file using build-id

gdb/testsuite/ChangeLog
2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Revert the previous commit:
	Tests for validate symbol file using build-id.
2015-07-15 20:27:32 +02:00
Jan Kratochvil
ddc98fbf2f Create empty nat/linux-maps.[ch] and common/target-utils.[ch]
Prepare new files for later move.

gdb/ChangeLog
2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
	* Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
	common/target-utils.h.
	(COMMON_OBS): Add target-utils.o.
	(linux-maps.o, target-utils.o): New.
	* target/target-utils.c: New file.
	* target/target-utils.h: New file.
	* config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
	* config/i386/linux64.mh (NATDEPFILES): Ditto.
	* nat/linux-maps.c: New file.
	* nat/linux-maps.h: New file.

gdb/gdbserver/ChangeLog
2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
	    Jan Kratochvil  <jan.kratochvil@redhat.com>

	Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
	* Makefile.in (OBS): Add target-utils.o.
	(linux-maps.o, target-utils.o): New.
	* configure.srv (srv_linux_obj): Add linux-maps.o.
2015-07-15 17:37:27 +02:00
Yao Qi
607685ecee Native debug arm program by aarch64 GDB
This patch is to let aarch64 GDB debug 32-bit arm program natively.  In
each function for fetching and storing registers, GDB will check
gdbarch_bfd_arch_info (gdbarch)->bits_per_word, if it is 32, call
the corresponding aarch32 functions in aarch32-linux-nat.c, otherwise
fall back to aarch64 code to fetch and store registers.

aarch64_linux_read_description has to return the right target description,
but we don't have gdbarch available there, so GDB fetches auxv and gets
AT_PHENT, in order to determine whether the target is 32-bit or 64-bit.
I learned this trick from solib-svr4.c.

gdb:

2015-07-07  Yao Qi  <yao.qi@linaro.org>

	* aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
	arm-linux-nat.c.
	* aarch64-linux-nat.c: Include aarch32-linux-nat.h and
	elf/external.h.
	(fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
	if target is 32-bit.
	(store_gregs_to_thread): Call aarch32_gp_regcache_collect
	if target is 32-bit.
	(fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
	if target is 32-bit.
	(store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
	if target is 32-bit.
	(tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
	(aarch64_linux_read_description): Return the right target
	description.
	* arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
	* config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
	* configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
	arm-linux-tdep.o
2015-07-07 16:58:19 +01:00
Yao Qi
f1b6788884 New aarch32-linux-nat.c
This patch is to move all the code about transferring
regcache <-> byte buffer for arm (aarch32) to a separate file
aarch32-linux-nat.c.  Then, in the following patch, aarch64 code
can use it to do multi-arch debugging.  This is a refactory patch.

gdb:

2015-07-07  Yao Qi  <yao.qi@linaro.org>

	* aarch32-linux-nat.c: New file.
	* aarch32-linux-nat.h: New file.
	* arm-linux-nat.c: Include aarch32-linux-nat.h.
	(fetch_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_gp_regcache_supply.
	(store_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_gp_regcache_collect.
	(fetch_vfp_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_vfp_regcache_supply.
	(store_vfp_regs): Move code to aarch32-linux-nat.c.  Call
	aarch32_vfp_regcache_collect.
	* config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
2015-07-07 16:58:19 +01:00
Gary Benson
4b8b5e7245 Introduce nat/linux-namespaces.[ch]
This commit introduces new shared files nat/linux-namespaces.[ch]
containing code to support Linux namespaces that will be used by
both GDB and gdbserver.

gdb/ChangeLog:

	* configure.ac (AC_CHECK_FUNCS): Add setns.
	* config.in: Regenerate.
	* configure: Likewise.
	* nat/linux-namespaces.h: New file.
	* nat/linux-namespaces.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
	(linux-namespaces.o): New rule.
	* config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
	* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
	* config/arm/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* config/ia64/linux.mh (NATDEPFILES): Likewise.
	* config/m32r/linux.mh (NATDEPFILES): Likewise.
	* config/m68k/linux.mh (NATDEPFILES): Likewise.
	* config/mips/linux.mh (NATDEPFILES): Likewise.
	* config/pa/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
	* config/s390/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux64.mh (NATDEPFILES): Likewise.
	* config/tilegx/linux.mh (NATDEPFILES): Likewise.
	* config/xtensa/linux.mh (NATDEPFILES): Likewise.

gdb/gdbserver/ChangeLog:

	* configure.ac (AC_CHECK_FUNCS): Add setns.
	* config.in: Regenerate.
	* configure: Likewise.
	* Makefile.in (SFILES): Add nat/linux-namespaces.c.
	(linux-namespaces.o): New rule.
	* configure.srv (srv_linux_obj): Add linux-namespaces.o.
2015-06-10 14:28:43 +01:00
Gary Benson
8e5d407004 Move low-level Linux x86 debug register code to a shared file
This commit moves the now-identical low-level Linux x86 debug register
code from gdb/x86-linux-nat.c and gdb/gdbserver/linux-x86-low.c into a
new shared file gdb/nat/x86-linux-dregs.c.

gdb/ChangeLog:

	* nat/x86-linux-dregs.h: New file.
	* nat/x86-linux-dregs.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
	(x86-linux-dregs.o): New rule.
	* config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* x86-linux-nat.c: Include nat/x86-linux-dregs.h.
	(u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
	(x86_linux_dr_get): Likewise.
	(x86_linux_dr_set): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_update_debug_registers): Likewise.

gdb/gdbserver/ChangeLog:

	* Makefile.in (x86-linux-dregs.o): New rule.
	* configure.srv: Add x86-linux-dregs.o to relevant targets.
	* linux-x86-low.c: Include nat/x86-linux-dregs.h.
	(u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
	(x86_linux_dr_get): Likewise.
	(x86_linux_dr_set): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(x86_linux_update_debug_registers): Likewise.
2015-03-24 14:05:45 +00:00
Gary Benson
4b134ca108 Make lwp_info.arch_private handling shared
This commit moves the code to handle lwp_info.arch_private for
Linux x86 into a new shared file, nat/x86-linux.c.

gdb/ChangeLog:

	* nat/x86-linux.h: New file.
	* nat/x86-linux.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
	(x86-linux.o): New rule.
	* config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
	(lwp_set_arch_private_info): New declaration.
	(lwp_arch_private_info): Likewise.
	* linux-nat.c (lwp_set_arch_private_info): New function.
	(lwp_arch_private_info): Likewise.
	* x86-linux-nat.c: Include nat/x86-linux.h.
	(arch_lwp_info): Removed structure.
	(update_debug_registers_callback):
	Use lwp_set_debug_registers_changed.
	(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
	and lwp_set_debug_registers_changed.
	(x86_linux_new_thread): Use lwp_set_debug_registers_changed.

gdb/gdbserver/ChangeLog:

	* Makefile.in (x86-linux.o): New rule.
	* configure.srv: Add x86-linux.o to relevant targets.
	* linux-low.c (lwp_set_arch_private_info): New function.
	(lwp_arch_private_info): Likewise.
	* linux-x86-low.c: Include nat/x86-linux.h.
	(arch_lwp_info): Removed structure.
	(update_debug_registers_callback):
	Use lwp_set_debug_registers_changed.
	(x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
	and lwp_set_debug_registers_changed.
	(x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2015-03-24 14:05:44 +00:00
Jan Kratochvil
bc23328cc1 Remove gdb.hp
gdb/ChangeLog
2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* config/djgpp/README: Remove gdb.hp.

gdb/testsuite/ChangeLog
2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
	* README: Remove HP-UX and gdb.hp.
	(configuration):
	* configure: Regenerate.
	* configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
	gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
	gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
	gdb.hp/gdb.defects/Makefile.
	* gdb.hp/Makefile.in: File deleted.
	* gdb.hp/gdb.aCC/Makefile.in: File deleted.
	* gdb.hp/gdb.aCC/optimize.c: File deleted.
	* gdb.hp/gdb.aCC/optimize.exp: File deleted.
	* gdb.hp/gdb.aCC/run.c: File deleted.
	* gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
	* gdb.hp/gdb.base-hp/Makefile.in: File deleted.
	* gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
	* gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
	* gdb.hp/gdb.base-hp/dollar.c: File deleted.
	* gdb.hp/gdb.base-hp/dollar.exp: File deleted.
	* gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
	* gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
	* gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
	* gdb.hp/gdb.base-hp/pxdb.c: File deleted.
	* gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
	* gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
	* gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
	* gdb.hp/gdb.base-hp/reg.exp: File deleted.
	* gdb.hp/gdb.base-hp/reg.s: File deleted.
	* gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
	* gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
	* gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
	* gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
	* gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
	* gdb.hp/gdb.compat/Makefile.in: File deleted.
	* gdb.hp/gdb.compat/average.c: File deleted.
	* gdb.hp/gdb.compat/sum.c: File deleted.
	* gdb.hp/gdb.compat/xdb.c: File deleted.
	* gdb.hp/gdb.compat/xdb0.c: File deleted.
	* gdb.hp/gdb.compat/xdb0.h: File deleted.
	* gdb.hp/gdb.compat/xdb1.c: File deleted.
	* gdb.hp/gdb.compat/xdb1.exp: File deleted.
	* gdb.hp/gdb.compat/xdb2.exp: File deleted.
	* gdb.hp/gdb.compat/xdb3.exp: File deleted.
	* gdb.hp/gdb.defects/Makefile.in: File deleted.
	* gdb.hp/gdb.defects/bs14602.c: File deleted.
	* gdb.hp/gdb.defects/bs14602.exp: File deleted.
	* gdb.hp/gdb.defects/solib-d.c: File deleted.
	* gdb.hp/gdb.defects/solib-d.exp: File deleted.
	* gdb.hp/gdb.defects/solib-d1.c: File deleted.
	* gdb.hp/gdb.defects/solib-d2.c: File deleted.
	* gdb.hp/gdb.objdbg/Makefile.in: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
	* gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
	* gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
	* gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
	* gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
	* gdb.hp/tools/odump: File deleted.
2015-03-20 17:15:15 +01:00
Jan Kratochvil
61a12cfa7b Remove HPUX
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6.  But coincidentally such UNICes are no longer
really supported by GDB.  Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.

In mail
        Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
        Message-ID: <20140211034157.GG5485@adacore.com>
        https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:

So I chose HP-UX first for this patch.

gdb/ChangeLog
2014-10-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Remove HPUX.
	* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
	(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
	(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
	ia64-hpux-tdep.h, solib-ia64-hpux.h.
	(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
	ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
	* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
	hppa-hpux-tdep.c.
	* config/ia64/hpux.mh: Remove file.
	* config/pa/hpux.mh: Remove file.
	* configure: Rebuilt.
	* configure.ac (dlgetmodinfo, somread.o): Remove.
	* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	(ia64-*-hpux*): Remove its float format exception.
	* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
	* hppa-hpux-nat.c: Remove file.
	* hppa-hpux-tdep.c: Remove file.
	* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them here from hppa-tdep.h
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
	(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
	* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
	Move them to hppa-tdep.c.
	(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
	declarations.
	* ia64-hpux-nat.c: Remove file.
	* ia64-hpux-tdep.c: Remove file.
	* ia64-hpux-tdep.h: Remove file.
	* inf-ttrace.c: Remove file.
	* inf-ttrace.h: Remove file.
	* solib-ia64-hpux.c: Remove file.
	* solib-ia64-hpux.h: Remove file.
	* solib-pa64.c: Remove file.
	* solib-pa64.h: Remove file.
	* solib-som.c: Remove file.
	* solib-som.h: Remove file.
	* somread.c: Remove file.
2015-03-13 20:24:22 +01:00
Mark Kettenis
2dcb2b1a45 Enable rthreads support on OpenBSD/hppa
gdb/
2015-03-05  Mark Kettenis  <kettenis@gnu.org>

        * hppabsd-nat.c: Remove file.
        * hppaobsd-nat.c: New file.
        * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c.  Add
        hppaobsd-nat.c.
        * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
        hppaobsd-nat.o.
2015-03-05 17:21:03 +01:00
Sergio Durigan Junior
8cc73a3902 Move code to disable ASR to nat/
This patch moves the shared code present on
gdb/linux-nat.c:linux_nat_create_inferior and
gdb/gdbserver/linux-low.c:linux_create_inferior to
nat/linux-personality.c.  This code is responsible for disabling
address space randomization based on user setting, and using
<sys/personality.h> to do that.  I decided to put the prototype of the
maybe_disable_address_space_randomization on nat/linux-osdata.h
because it seemed the best place to put it.

I regression-tested this patch on Fedora 20 x86_64, and found no
regressions.

gdb/ChangeLog
2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
	(linux-personality.o): New rule.
	* common/common-defs.h: Include <stdint.h>.
	* config/aarch64/linux.mh (NATDEPFILES): Include
	linux-personality.o.
	* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
	* config/arm/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* config/i386/linux.mh (NATDEPFILES): Likewise.
	* config/ia64/linux.mh (NATDEPFILES): Likewise.
	* config/m32r/linux.mh (NATDEPFILES): Likewise.
	* config/m68k/linux.mh (NATDEPFILES): Likewise.
	* config/mips/linux.mh (NATDEPFILES): Likewise.
	* config/pa/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
	* config/s390/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux64.mh (NATDEPFILES): Likewise.
	* config/sparc/linux.mh (NATDEPFILES): Likewise.
	* config/tilegx/linux.mh (NATDEPFILES): Likewise.
	* config/xtensa/linux.mh (NATDEPFILES): Likewise.
	* defs.h: Remove #include <stdint.h> (moved to
	common/common-defs.h).
	* linux-nat.c: Include nat/linux-personality.h.  Remove #include
	<sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
	nat/linux-personality.c).
	(linux_nat_create_inferior): Remove code to disable address space
	randomization (moved to nat/linux-personality.c).  Create cleanup
	to disable address space randomization.
	* nat/linux-personality.c: New file.
	* nat/linux-personality.h: Likewise.

gdb/gdbserver/ChangeLog
2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>

	* Makefile.in (SFILES): Add linux-personality.c.
	(linux-personality.o): New rule.
	* configure.srv (srv_linux_obj): Add linux-personality.o to the
	list of objects to be built.
	* linux-low.c: Include nat/linux-personality.h.
	(linux_create_inferior): Remove code to disable address space
	randomization (moved to ../nat/linux-personality.c).  Create
	cleanup to disable address space randomization.
2015-01-15 15:10:49 -05:00
Yao Qi
cdf436294f Detect 64-bit-ness in PowerPC Book III-E
This patch is to teach both GDB and GDBServer to detect 64-bit inferior
correctly.  We find a problem that GDBServer is unable to detect on a
e5500 core processor.  Current GDBServer assumes that MSR is a 64-bit
register, but MSR is a 32-bit register in Book III-E.  This patch is
to fix this problem by checking the right bit in MSR, in order to handle
both Book III-S and Book III-E.  In order to detect Book III-S and
Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by
getauxval on glibc >= 2.16.  If getauxval doesn't exist, we implement
the fallback by parsing /proc/self/auxv), because it should an invariant
on the same machine cross different processes.

In order to share code, I add nat/ppc-linux.c for both GDB and
GDBserver side.

gdb:

2015-01-14  Yao Qi  <yao@codesourcery.com>

	* Makefile.in (ppc-linux.o): New rule.
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
	* configure.ac: AC_CHECK_FUNCS(getauxval).
	* config.in: Re-generated.
	* configure: Re-generated.
	* nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
	Declare.
	* nat/ppc-linux.c: New file.
	* ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
	Call ppc64_64bit_inferior_p.

gdb/gdbserver:

2015-01-14  Yao Qi  <yao@codesourcery.com>

	* Makefile.in (SFILES): Add nat/ppc-linux.c.
	(ppc-linux.o): New rule.
	* configure.srv (powerpc*-*-linux*): Add ppc-linux.o.
	* configure.ac: AC_CHECK_FUNCS(getauxval).
	* config.in: Re-generated.
	* configure: Re-generated.
	* linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call
	ppc64_64bit_inferior_p
2015-01-14 22:28:27 +08:00
Joel Brobecker
32d0add0a6 Update year range in copyright notice of all files owned by the GDB project.
gdb/ChangeLog:

        Update year range in copyright notice of all files.
2015-01-01 13:32:14 +04:00
Joel Brobecker
077309e264 Yearly gdb/ChangeLog rotation.
This patch renames gdb/'s ChangeLog to ChangeLog-2014 and creates
a new one for 2015. config/djgpp/fnchange.lst is updated accordingly.

gdb/ChangeLog:

 	* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
2015-01-01 13:23:33 +04:00
Ulrich Weigand
ff1eb2b544 Use core regset iterators on Sparc Solaris
Remove native-only core file handling on Sparc Solaris.  Instead,
enable the sparc target generic core regset logic on Solaris by
providing appropriate register offset maps.

Thanks to Joel Brobecker for testing!

gdb/
	* config/sparc/sol2.mh (NATDEPFILES): Remove core-regset.o.
	* sparc-sol2-tdep.c: Include "regset.h".
	(sparc32_sol2_supply_core_gregset): New function.
	(sparc32_sol2_collect_core_gregset): Likewise.
	(sparc32_sol2_supply_core_fpregset): Likewise.
	(sparc32_sol2_collect_core_fpregset): Likewise.
	(sparc32_sol2_gregset, sparc32_sol2_fpregset): New variables.
	(sparc32_sol2_init_abi): Set tdep->gregset/sizeof_gregset and
	tdep->fpregset/sizeof_fpregset.
	* sparc64-sol2-tdep.c: Include "regset.h".
	(sparc64_sol2_supply_core_gregset): New function.
	(sparc64_sol2_collect_core_gregset): Likewise.
	(sparc64_sol2_supply_core_fpregset): Likewise.
	(sparc64_sol2_collect_core_fpregset): Likewise.
	(sparc64_sol2_gregset, sparc64_sol2_fpregset): New variables.
	(sparc64_sol2_init_abi): Set tdep->gregset/sizeof_gregset and
	tdep->fpregset/sizeof_fpregset.
2014-12-03 15:38:46 +01:00
Ulrich Weigand
ac3d87c0d2 Use core regset iterators on GNU Hurd
Remove native-only core file handling on GNU Hurd.  Instead, enable the
x86 target generic core regset logic on the Hurd by providing an
appropriate register offset map.

Thanks to Samuel Thibault for testing!

gdb/

	* config/i386/i386gnu.mh (NATDEPFILES): Remove core-regset.o.
	* i386gnu-nat.c: Do not include <sys/procfs.h> or "gregset.h".
	(CREG_OFFSET, creg_offset, CREG_ADDR): Remove.
	(supply_gregset, supply_fpregset): Remove.
	* i386gnu-tdep.c (i386gnu_gregset_reg_offset): New variable.
	(i386gnu_init_abi): Set tdep->gregset_reg_offset, gregset_num_regs,
	and sizeof_gregset.
2014-12-01 13:42:41 +01:00
Ulrich Weigand
b2859a9a54 Remove (dead-code) native core file sniffers on Linux targets
Since Andreas Arnez' recent patch series, all Linux targets install
gdbarch_iterate_over_regset_sections routines.  This means that on
Linux native targets, old-style core sniffers are never used.

Most Linux targets haven't been using such sniffers for a long time
anyway, but a couple remain: ia64 and sparc use core-regset.o, and
m68k installs its own core_fns.  All this is now dead code, which
this commit removes.

gdb/
2014-11-28  Ulrich Weigand  <uweigand@de.ibm.com>

	* config/ia64/linux.mh (NATDEPFILES): Remove core-regset.o.
	* config/sparc/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux64.mh (NATDEPFILES): Likewise.
	* m68klinux-nat.c (fetch_core_registers): Remove.
	(linux_elf_core_fns): Remove.
	(_initialize_m68k_linux_nat): Do not call deprecated_add_core_fns.
2014-11-28 15:53:05 +01:00
Yao Qi
2acf986b74 Don't set CC in config/i386/go32.mh
I cross-compile gdb for msdosdjgpp (both target and host is
i586-pc-msdosdjgpp), so the CC should be i586-pc-msdosdjgpp-gcc.
However, CC is set incorrectly to gcc after config/i386/go32.mh is inlined
into the Makefile.

This patch is to remove the CC setting in config/i386/go32.mh.

gdb:

2014-11-19  Yao Qi  <yao@codesourcery.com>

	* config/i386/go32.mh (CC): Remove.
2014-11-19 15:44:35 +08:00
Pedro Alves
09dd9a6907 Remove Vax Ultrix and VAX BSD support
Built and tested on x86_64 Fedora 20, with --enable-targets=all.

gdb/
2014-10-24  Pedro Alves  <palves@redhat.com>

	* Makefile.in (ALLDEPFILES): Remove vax-nat.c.
	* NEWS (Removed targets): Add VAX BSD and VAX Ultrix.
	* config/vax/vax.mh: Delete.
	* configure.host: Move vax-*-bsd* and vax-*-ultrix* to the
	obsolete configurations section.
	* configure.tgt (vax-*-*): Don't mention 4.2BSD nor Ultrix.
	* vax-nat.c: Delete file.

gdb/testsuite/
2014-10-24  Pedro Alves  <palves@redhat.com>

	* gdb.base/corefile.exp: Remove references to ultrix.
	* gdb.base/interrupt.exp: Likewise.
	* gdb.base/whatis.exp: Likewise.
	* gdb.gdb/selftest.exp: Likewise.
	* gdb.threads/manythreads.exp: Likewise.
	* gdb.threads/print-threads.exp: Likewise.
	* gdb.threads/pthreads.exp:: Likewise.
	* gdb.threads/schedlock.exp: Likewise.
2014-10-24 17:56:56 +01:00
Pedro Alves
32a8097ba5 Delete Tru64 support
This commit does most of the mechanical removal.  IOW, the easy part.

procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h.  Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.

Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them.  That can always be
done on a separate pass, preferably by someone who can test on alpha.

A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better.  We can revisit those when we next need to touch that
code.

I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.

Built and tested on x86_64 Fedora 20, with --enable-targets=all.

Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:

 checking for default auto-load directory... $debugdir:$datadir/auto-load
 checking for default auto-load safe-path... $debugdir:$datadir/auto-load
 *** Configuration alpha-unknown-osf3 is obsolete.
 *** Support has been REMOVED.
 make[1]: *** [configure-gdb] Error 1
 make[1]: Leaving directory `build-osf'
 make: *** [all] Error 2

gdb/
2014-10-17  Pedro Alves  <palves@redhat.com>

	* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
	(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
	(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
	solib-osf.c.
	* NEWS: Mention that support for alpha*-*-osf* has been removed.
	* ada-lang.h [__alpha__ && __osf__]
	(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
	* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
	* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
	GDB_OSABI_OSF1.
	* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
	files.
	* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
	(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
	* configure: Regenerate.
	* configure.ac: Remove references to osf.
	* configure.host: Handle alpha*-*-osf* in the obsolete hosts
	section.  Remove all other references to osf.
	* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
	Remove all other references to osf.
	* dec-thread.c: Delete file.
	* defs.h (GDB_OSABI_OSF1): Delete.
	* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
	defined.
	* osabi.c (gdb_osabi_names): Delete "OSF/1".
	* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
	Delete code.
	(unconditionally_kill_inferior)
	[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
	* solib-osf.c: Delete file.

gdb/testsuite/
2014-10-17  Pedro Alves  <palves@redhat.com>

	* gdb.base/callfuncs.exp: emove references to osf.
	* gdb.base/sigall.exp: Likewise.
	* gdb.gdb/selftest.exp: Likewise.
	* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
	* gdb.mi/non-stop.c: Likewise.
	* gdb.mi/pthreads.c: Likewise.
	* gdb.reverse/sigall-precsave.exp: Likewise.
	* gdb.reverse/sigall-reverse.exp: Likewise.
	* gdb.threads/pthreads.c: Likewise.
	* gdb.threads/pthreads.exp: Likewise.

gdb/doc/
2014-10-17  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
	(SVR4 Process Information): Delete mention of OSF/1.
2014-10-17 11:18:59 +01:00
Pedro Alves
3831839c08 Delete IRIX support
This does most of the mechanical removal.  IOW, the easy part.

This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.

mips-tdep.c is left alone.  E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c.  Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.

I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.

Built and tested on x86_64 Fedora 20, with --enable-targets=all.

Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:

 checking for default auto-load directory... $debugdir:$datadir/auto-load
 checking for default auto-load safe-path... $debugdir:$datadir/auto-load
 *** Configuration mips-sgi-irix6 is obsolete.
 *** Support has been REMOVED.
 make[1]: *** [configure-gdb] Error 1
 make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
 make: *** [all] Error 2

gdb/
2014-10-10  Pedro Alves  <palves@redhat.com>

	* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
	(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
	(HFILES_NO_SRCDIR): Remove solib-irix.h.
	* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
	and been removed.
	* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
	* configure.ac: Remove references to IRIX.
	* configure.host: Add *-*-irix* to the obsolete hosts section.
	Remove all other references to irix.
	* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
	Delete files.

gdb/testsuite/
2014-10-10  Pedro Alves  <palves@redhat.com>

	* gdb.base/bigcore.exp: Remove references to IRIX.
	* gdb.base/funcargs.exp: Likewise.
	* gdb.base/interrupt.exp: Likewise.
	* gdb.base/mips_pro.exp: Likewise.
	* gdb.base/nodebug.exp: Likewise.
	* gdb.base/setvar.exp: Likewise.
	* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
2014-10-10 18:18:52 +01:00
Samuel Thibault
05db5edd79 Add hardware watchpoint support for x86 GNU Hurd.
gdb/
	* config/i386/i386gnu.mh (NATDEPFILES): Add x86-nat.o and
	x86-dregs.o.
	* gnu-nat.c (inf_threads): New function.
	* gnu-nat.h (inf_threads_ftype): New typedef.
	(inf_threads): New declaration.
	* i386gnu-nat.c: Include "x86-nat.h" and "inf-child.h".
	[i386_DEBUG_STATE] (i386_gnu_dr_get, i386_gnu_dr_set)
	(i386_gnu_dr_set_control_one, i386_gnu_dr_set_control)
	(i386_gnu_dr_set_addr_one, i386_gnu_dr_set_addr)
	(i386_gnu_dr_get_reg, i386_gnu_dr_get_addr, 386_gnu_dr_get_status)
	(i386_gnu_dr_get_control): New functions.
	(reg_addr): New structure.
	(_initialize_i386gnu_nat) [i386_DEBUG_STATE]: Initialize hardware
	i386 debugging register hooks.
	* NEWS: Mention this.
2014-09-16 14:38:09 +02:00
Gary Benson
df7e526582 Rename 32- and 64-bit Intel files from "i386" to "x86"
This commit renames nine files that contain code used by both 32- and
64-bit Intel ports such that their names are prefixed with "x86"
rather than "i386".  All types, functions and variables within these
files are likewise renamed such that their names are prefixed with
"x86" rather than "i386".  This makes GDB follow the convention used
by gdbserver such that 32-bit Intel code lives in files called
"i386-*", 64-bit Intel code lives in files called "amd64-*", and code
for both 32- and 64-bit Intel lives in files called "x86-*".

This commit only renames OS-independent files.  The Linux ports of
both GDB and gdbserver now follow the i386/amd64/x86 convention fully.
Some ports still use the old convention where "i386" in file/function/
type/variable names can mean "32-bit only" or "32- and 64-bit" but I
don't want to touch ports I can't fully test except where absolutely
necessary.

gdb/ChangeLog:

	* i386-nat.h: Renamed as...
	* x86-nat.h: New file.  All type, function and variable name
	prefixes changed from "i386_" to "x86_".  All references updated.
	* i386-nat.c: Renamed as...
	* x86-nat.c: New file.  All type, function and variable name
	prefixes changed from "i386_" to "x86_".  All references updated.
	* common/i386-xstate.h: Renamed as...
	* common/x86-xstate.h: New file.  All type, function and variable
	name prefixes changed from "i386_" to "x86_".  All references
	updated.
	* nat/i386-cpuid.h: Renamed as...
	* nat/x86-cpuid.h: New file.  All type, function and variable name
	prefixes changed from "i386_" to "x86_".  All references updated.
	* nat/i386-gcc-cpuid.h: Renamed as...
	* nat/x86-gcc-cpuid.h: New file.  All type, function and variable
	name prefixes changed from "i386_" to "x86_".  All references
	updated.
	* nat/i386-dregs.h: Renamed as...
	* nat/x86-dregs.h: New file.  All type, function and variable name
	prefixes changed from "i386_" to "x86_".  All references updated.
	* nat/i386-dregs.c: Renamed as...
	* nat/x86-dregs.c: New file.  All type, function and variable name
	prefixes changed from "i386_" to "x86_".  All references updated.

gdb/gdbserver/ChangeLog:

	* i386-low.h: Renamed as...
	* x86-low.h: New file.  All type, function and variable name
	prefixes changed from "i386_" to "x86_".  All references updated.
	* i386-low.c: Renamed as...
	* x86-low.c: New file.  All type, function and variable name
	prefixes changed from "i386_" to "x86_".  All references updated.
2014-09-02 16:54:08 +01:00
Gary Benson
040baaf6de Move duplicated code into new files
This commit moves the duplicated code in {i386,amd64}-linux-nat.c
into the new files x86-linux-nat.[ch].  Additionally, a new
file i386-linux-nat.h was required to expose a value required
by the 32-bit code in x86-linux-nat.c.

gdb/
2014-07-11  Gary Benson  <gbenson@redhat.com>

	* i386-linux-nat.h: New file.
	* x86-linux-nat.h: Likewise.
	* x86-linux-nat.c: Likewise.
	* Makefile.in (HFILES_NO_SRCDIR): Add the above new headers.
	* config/i386/linux.mh (NATDEPFILES): Add x86-linux-nat.o.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* amd64-linux-nat.c (x86-linux-nat.h): New include.
	(PTRACE_GETREGSET): Now in x86-linux-nat.h.
	(PTRACE_SETREGSET): Likewise.
	(arch_lwp_info): Now in x86-linux-nat.c.
	(have_ptrace_getregset): Now in x86-linux-nat.h.
	(x86_linux_dr_get): Now in x86-linux-nat.c.
	(x86_linux_dr_set): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_prepare_to_resume): Likewise.
	(x86_linux_new_thread): Likewise.
	(x86_linux_new_fork): Likewise.
	(x86_linux_get_thread_area): Likewise.
	(super_post_startup_inferior): Likewise.
	(x86_linux_child_post_startup_inferior): Likewise.
	(AMD64_LINUX_USER64_CS): Likewise.
	(AMD64_LINUX_X32_DS): Likewise.
	(x86_linux_read_description): Likewise.
	(x86_linux_enable_btrace): Likewise.
	(x86_linux_disable_btrace): Likewise.
	(x86_linux_teardown_btrace): Likewise.
	(x86_linux_read_btrace): Likewise.
	(x86_linux_create_target): Likewise.
	(x86_linux_add_target): Likewise.
	* i386-linux-nat.c (x86-linux-nat.h): New include.
	(PTRACE_GETREGSET): Now in x86-linux-nat.h.
	(PTRACE_SETREGSET): Likewise.
	(arch_lwp_info): Now in x86-linux-nat.c.
	(have_ptrace_getregset): Now in x86-linux-nat.h.
	(x86_linux_dr_get): Now in x86-linux-nat.c.
	(x86_linux_dr_set): Likewise.
	(x86_linux_dr_get_addr): Likewise.
	(x86_linux_dr_get_control): Likewise.
	(x86_linux_dr_get_status): Likewise.
	(update_debug_registers_callback): Likewise.
	(x86_linux_dr_set_control): Likewise.
	(x86_linux_dr_set_addr): Likewise.
	(x86_linux_prepare_to_resume): Likewise.
	(x86_linux_new_thread): Likewise.
	(x86_linux_new_fork): Likewise.
	(x86_linux_get_thread_area): Likewise.
	(super_post_startup_inferior): Likewise.
	(x86_linux_child_post_startup_inferior): Likewise.
	(AMD64_LINUX_USER64_CS): Likewise.
	(AMD64_LINUX_X32_DS): Likewise.
	(x86_linux_read_description): Likewise.
	(x86_linux_enable_btrace): Likewise.
	(x86_linux_disable_btrace): Likewise.
	(x86_linux_teardown_btrace): Likewise.
	(x86_linux_read_btrace): Likewise.
	(x86_linux_create_target): Likewise.
	(x86_linux_add_target): Likewise.
2014-07-11 12:24:26 +01:00
Gary Benson
3a8ee006fb Create nat/i386-dregs.c
This commit moves code to be shared from i386-{nat,low}.[ch]
into a new file, nat/i386-dregs.c.

gdb/
2014-06-19  Gary Benson  <gbenson@redhat.com>

	* nat/i386-dregs.c: New file.
	* Makefile.in (i386-dregs.o): New rule.
	* config/i386/cygwin.mh (NATDEPFILES): Add i386-dregs.o.
	* config/i386/cygwin64.mh (NATDEPFILES): Likewise.
	* config/i386/darwin.mh (NATDEPFILES): Likewise.
	* config/i386/fbsd.mh (NATDEPFILES): Likewise.
	* config/i386/fbsd64.mh (NATDEPFILES): Likewise.
	* config/i386/go32.mh (NATDEPFILES): Likewise.
	* config/i386/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* config/i386/mingw.mh (NATDEPFILES): Likewise.
	* config/i386/mingw64.mh (NATDEPFILES): Likewise.
	* i386-nat.h (debug_hw_points): New declaration.
	* i386-nat.c (breakpoint.h): Remove include.
	(command.h): Likewise.
	(target.h): Likewise.
	(gdb_assert.h): Likewise.
	(debug_hw_points): Made nonstatic.
	(debug_printf): Now in i386-dregs.c.
	(TARGET_HAS_DR_LEN_8): Likewise.
	(DR_CONTROL_SHIFT): Likewise.
	(DR_CONTROL_SIZE): Likewise.
	(DR_RW_EXECUTE): Likewise.
	(DR_RW_WRITE): Likewise.
	(DR_RW_READ): Likewise.
	(DR_RW_IORW): Likewise.
	(DR_LEN_1): Likewise.
	(DR_LEN_2): Likewise.
	(DR_LEN_4): Likewise.
	(DR_LEN_8): Likewise.
	(DR_LOCAL_ENABLE_SHIFT): Likewise.
	(DR_GLOBAL_ENABLE_SHIFT): Likewise.
	(DR_ENABLE_SIZE): Likewise.
	(DR_LOCAL_SLOWDOWN): Likewise.
	(DR_GLOBAL_SLOWDOWN): Likewise.
	(DR_CONTROL_RESERVED): Likewise.
	(I386_DR_CONTROL_MASK): Likewise.
	(I386_DR_VACANT): Likewise.
	(I386_DR_LOCAL_ENABLE): Likewise.
	(I386_DR_GLOBAL_ENABLE): Likewise.
	(I386_DR_DISABLE): Likewise.
	(I386_DR_SET_RW_LEN): Likewise.
	(I386_DR_GET_RW_LEN): Likewise.
	(I386_DR_WATCH_HIT): Likewise.
	(i386_wp_op_t): Likewise.
	(i386_show_dr): Likewise.
	(i386_length_and_rw_bits): Likewise.
	(i386_insert_aligned_watchpoint): Likewise.
	(i386_remove_aligned_watchpoint): Likewise.
	(i386_handle_nonaligned_watchpoint): Likewise.
	(i386_update_inferior_debug_regs): Likewise.
	(i386_insert_watchpoint): Use i386_dr_insert_watchpoint.
	(i386_remove_watchpoint): Use i386_dr_remove_watchpoint.
	(i386_region_ok_for_watchpoint):
	Use i386_dr_region_ok_for_watchpoint.
	(i386_stopped_data_address): Use i386_dr_stopped_data_address.

gdb/gdbserver/
2014-06-19  Gary Benson  <gbenson@redhat.com>

	* Makefile.in (i386-dregs.o): New rule.
	* configure.srv: Add i386-dregs.o to all targets using i386-low.o.
	* i386-low.c (target.h): Remove include.
	(TARGET_HAS_DR_LEN_8): Now in i386-dregs.c.
	(DR_CONTROL_SHIFT): Likewise.
	(DR_CONTROL_SIZE): Likewise.
	(DR_RW_EXECUTE): Likewise.
	(DR_RW_WRITE): Likewise.
	(DR_RW_READ): Likewise.
	(DR_RW_IORW): Likewise.
	(DR_LEN_1): Likewise.
	(DR_LEN_2): Likewise.
	(DR_LEN_4): Likewise.
	(DR_LEN_8): Likewise.
	(DR_LOCAL_ENABLE_SHIFT): Likewise.
	(DR_GLOBAL_ENABLE_SHIFT): Likewise.
	(DR_ENABLE_SIZE): Likewise.
	(DR_LOCAL_SLOWDOWN): Likewise.
	(DR_GLOBAL_SLOWDOWN): Likewise.
	(DR_CONTROL_RESERVED): Likewise.
	(I386_DR_CONTROL_MASK): Likewise.
	(I386_DR_VACANT): Likewise.
	(I386_DR_LOCAL_ENABLE): Likewise.
	(I386_DR_GLOBAL_ENABLE): Likewise.
	(I386_DR_DISABLE): Likewise.
	(I386_DR_SET_RW_LEN): Likewise.
	(I386_DR_GET_RW_LEN): Likewise.
	(I386_DR_WATCH_HIT): Likewise.
	(i386_wp_op_t): Likewise.
	(i386_show_dr): Likewise.
	(i386_length_and_rw_bits): Likewise.
	(i386_insert_aligned_watchpoint): Likewise.
	(i386_remove_aligned_watchpoint): Likewise.
	(i386_handle_nonaligned_watchpoint): Likewise.
	i386_update_inferior_debug_regs(): Likewise.
	(i386_dr_insert_watchpoint): Likewise.
	(i386_dr_remove_watchpoint): Likewise.
	(i386_dr_region_ok_for_watchpoint): Likewise.
	(i386_dr_stopped_data_address): Likewise.
	(i386_dr_stopped_by_watchpoint): Likewise.
2014-06-19 10:56:00 +01:00
Mark Kettenis
07284463de Enable rthreads support on OpenBSD/powerpc.
gdb/ChangeLog:

        * ppcobsd-nat.c: Include "obsd-nat.h".
        (_initialize_ppcobsd_nat): Call obsd_add_target instead of
        add_target.
        * config/powerpc/obsd.mh (NATDEPFILES): Add obsd-nat.o.
2014-05-03 22:36:44 +02:00
Mark Kettenis
a900370fa1 Enable rhreads support on OpenBSD/i386.
gdb/ChangeLog:

        * i386obsd-nat.c: Include "obsd-nat.h".
        (_initialize_i386obsd_nat): Call obsd_add_target instead of
        add_target.
        * config/i386/obsd.mh (NATDEPFILES): Add obsd-nat.o.
2014-03-01 15:29:34 +01:00
Mark Kettenis
96c70abaef Enable rthreads support on OpenBSD/mips64.
gdb/ChangeLog:

        * mips64obsd-nat.c: Include "obsd-nath".
        (_initialize_mips64obsd_nat): Call obsd_add_target instead of
        add_target
        * config/mips/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
2014-03-01 12:00:19 +01:00
Mark Kettenis
874a80af9f Enable rthreads support on OpenBSD/amd64.
gdb/ChangeLog:

        * amd64obsd-nat.c (_initialize_amd64obsd_nat): Call
        obsd_add_target instead of add_target.
        * config/i386/obsd64.mh (NATDEPFILES): Add obsd-nat.o.
2014-03-01 11:49:58 +01:00
Mark Kettenis
1ed586ce1d Enable rthreads supports on OpenBSD/sparc64.
gdb/ChangeLog:

        * configure.host (sparc64-*-openbsd*): Set gdb_host to obsd64.
        * config/sparc/obsd64.mh: New file.
        * sparc64obsd-nat.c: New file.
2014-02-28 23:07:55 +01:00
Joel Brobecker
ecd75fc8ee Update Copyright year range in all files maintained by GDB. 2014-01-01 07:54:24 +04:00
Joel Brobecker
7b6e104658 Add gdb/ChangeLog-2013 entry in fnchange.lst. 2014-01-01 07:34:22 +04:00
Ulrich Weigand
0e5fae36f1 S/390: Rename source files to *-linux-*
As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets.  Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary.  But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets.  The latest such incident was
observed here:

    https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html

gdb/
2013-10-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>

	* s390-tdep.h: Rename to...
	* s390-linux-tdep.h: ...here.
	* s390-tdep.c: Rename to...
	* s390-linux-tdep.c: ...here.  Adjust #include.
	* s390-nat.c: Rename to...
	* s390-linux-nat.c: ...here.  Adjust #include.
	* config/s390/s390.mh: Rename to...
	* config/s390/linux.mh: ...here.  Reflect rename s390-nat.o ->
	s390-linux-nat.o.
	* configure.host: Reflect host rename "s390" -> "linux".
	* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
	* Makefile.in (ALL_TARGET_OBS): Likewise.
	(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
	s390-linux-tdep.h.
	(ALLDEPFILES): Reflect rename of .c files.
2013-10-30 18:57:08 +01:00
Pedro Alves
98882a2651 Make STARTUP_WITH_SHELL a runtime toggle -- add new "set/show startup-with-shell" option.
Occasionaly we hear about people having problems with GDB not being
able to start programs (with "run"/"start").  GDB spawns a shell to
start the program, and most often, it'll be the case that the problem
is actually with the user's shell setup.

GDB has code to disable the use of the shell to start programs.
That's the STARTUP_WITH_SHELL macro that native targets could set to 0
in their nm.h file (though no target actually uses it nowadays).

This patch makes that setting a run-time knob instead.  This will be
useful to quickly diagnose such shell issues, and might also come in
handy at other times (such as when debugging the shell itself, if you
don't have a different shell handy).

gdb/
2013-10-24  Pedro Alves  <palves@redhat.com>

	* NEWS (New options): Mention set/show startup-with-shell.
	* config/alpha/nm-osf3.h (START_INFERIOR_TRAPS_EXPECTED): Set to 2
	instead of 3.
	* fork-child.c (fork_inferior, startup_inferior): Handle 'set
	startup-with-shell'.
	(show_startup_with_shell): New function.
	(_initialize_fork_child): Register the set/show startup-with-shell
	commands.
	* inf-ptrace.c (inf_ptrace_create_inferior): Remove comment.
	* inf-ttrace.c (inf_ttrace_him): Remove comment.
	* procfs.c (procfs_init_inferior): Remove comment.
	* infcmd.c (startup_with_shell): New global.
	* inferior.h (startup_with_shell): Declare global.
	(STARTUP_WITH_SHELL): Delete.
	(START_INFERIOR_TRAPS_EXPECTED): Set to 1 by default instead of 2.

gdb/doc/
2013-10-24  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (Starting): Document set/show startup-with-shell.
2013-10-25 14:02:59 +00:00
Jan Kratochvil
a61d6db83d Remove solib-sunos.c
gdb/
2013-09-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Remove solib-sunos.c.
	* Makefile.in (ALLDEPFILES): Remove solib-sunos.c.
	* config/m68k/obsd.mh (NATDEPFILES): Remove solib-sunos.o.
	* objfiles.c (rt_common_objfile): Remove.
	(free_objfile): Remove rt_common_objfile comparison.
	* objfiles.h (rt_common_objfile): Remove.
	* solib-sunos.c: Remove.
	* symfile.c (reread_symbols): Remove solib-sunos.c comment.
2013-09-24 13:51:55 +00:00
Jan Kratochvil
2659903bfa Remove a.out NetBSD and OpenBSD hosts
gdb/
2013-09-21  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Remove a.out NetBSD and OpenBSD hosts.
	* NEWS (Removed native configurations): New.
	* config/arm/nbsdaout.mh: Remove.
	* config/i386/nbsdaout.mh: Remove.
	* config/i386/obsdaout.mh: Remove.
	* config/m68k/nbsdaout.mh: Remove.
	* config/sparc/nbsdaout.mh: Remove.
	* config/vax/nbsdaout.mh: Remove.
	* configure.host (arm*-*-netbsd*, i[34567]86-*-netbsd*)
	(i[34567]86-*-openbsd[0-2].*, i[34567]86-*-openbsd3.[0-3])
	(m68*-*-netbsd*, sparc-*-netbsd*, vax-*-netbsd*): Add them to obsolete
	error.
	(arm*-*-netbsd*, i[34567]86-*-netbsd*, i[34567]86-*-openbsd[0-2].*)
	(i[34567]86-*-openbsd3.[0-3], m68*-*-netbsd*, sparc-*-netbsdaout*)
	(sparc-*-netbsd*, vax-*-netbsd*): Remove.
2013-09-24 13:48:44 +00:00
Ulrich Weigand
d91fab15e7 2013-09-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
* config/s390/s390.mh (NATDEPFILES): Add linux-waitpid.o.
2013-09-10 15:05:23 +00:00
Yao Qi
7b00db47ce gdb/
* config/djgpp/fnchange.lst: Remove entry of
	i386-interix-nat.c and i386-interix-tdep.c.
	* configure.ac: Remove '*-*-interix*'.
	* configure: Re-generated.
	* defs.h (enum gdb_osabi): Remove GDB_OSABI_INTERIX.
	* i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Remove
	obsolete comments.
	* osabi.c (gdb_osabi_names): Remove "Interix".
2013-09-02 23:07:07 +00:00
Luis Machado
96d7229d2a Unify ptrace options discovery code and make both GDB and
gdbserver use it.

	gdb/
	* Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-nat.h and
	nat/linux-waitpid.h.
	(linux-waitpid.o): New object file rule.
	* common/linux-ptrace.c: Include nat/linux-waitpid.h.
	(current_ptrace_options): Moved from linux-nat.c.
	(linux_ptrace_test_ret_to_nx): Use type casts for ptrace
	parameters.
	(linux_fork_to_function): New function.
	(linux_grandchild_function): Likewise.
	(linux_child_function): Likewise.
	(linux_check_ptrace_features): New function, heavily
	based on linux-nat.c:linux_test_for_tracefork.
	(linux_enable_event_reporting): New function.
	(ptrace_supports_feature): Likewise.
	(linux_supports_tracefork): Likewise.
	(linux_supports_traceclone): Likewise.
	(linux_supports_tracevforkdone): Likewise.
	(linux_supports_tracesysgood): Likewise.
	* common/linux-ptrace.h (HAS_NOMMU): Moved from
	gdbserver/linux-low.c.
	(linux_enable_event_reporting): New declaration.
	(linux_supports_tracefork): Likewise.
	(linux_supports_traceclone): Likewise.
	(linux_supports_tracevforkdone): Likewise.
	(linux_supports_tracesysgood): Likewise.
	* config.in (PTRACE_TYPE_ARG4): Regenerate.
	* config/aarch64/linux.mh (NATDEPFILES): Add linux-waitpid.o.
	* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
	* config/arm/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux.mh (NATDEPFILES): Likewise.
	* config/i386/linux64.mh (NATDEPFILES): Likewise.
	* config/ia64/linux.mh (NATDEPFILES): Likewise.
	* config/m32r/linux.mh (NATDEPFILES): Likewise.
	* config/m68k/linux.mh (NATDEPFILES): Likewise.
	* config/mips/linux.mh (NATDEPFILES): Likewise.
	* config/pa/linux.mh (NATDEPFILES): Likewise..
	* config/powerpc/linux.mh (NATDEPFILES): Likewise..
	* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
	* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux.mh (NATDEPFILES): Likewise.
	* config/sparc/linux64.mh (NATDEPFILES): Likewise.
	* config/tilegx/linux.mh (NATDEPFILES): Likewise.
	* config/xtensa/linux.mh (NATDEPFILES): Likewise.
	* configure.ac (AC_CACHE_CHECK): Add void * to the list of
	ptrace's 4th argument's types.
	Check the type of PTRACE_TYPE_ARG4.
	* configure: Regenerate.
	* linux-nat.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
	(SYSCALL_SIGTRAP): Moved to nat/linux-nat.h.
	(linux_supports_tracefork_flag): Remove.
	(linux_supports_tracesysgood_flag): Likewise.
	(linux_supports_tracevforkdone_flag): Likewise.
	(current_ptrace_options): Moved to
	common/linux-ptrace.c.
	(linux_tracefork_child): Remove.
	(my_waitpid): Remove.
	(linux_test_for_tracefork): Renamed to
	linux_check_ptrace_features and moved to common/linux-ptrace.c.
	(linux_test_for_tracesysgood): Remove.
	(linux_supports_tracesysgood): Remove.
	(linux_supports_tracefork): Remove.
	(linux_supports_tracevforkdone): Remove.
	(linux_enable_tracesysgood): Remove.
	(linux_enable_event_reporting): Remove.
	(linux_init_ptrace): New function.
	(linux_child_post_attach): Call linux_init_ptrace.
	(linux_child_post_startup_inferior): Call linux_init_ptrace.
	(linux_child_follow_fork): Call linux_supports_tracefork
	and linux_supports_tracevforkdone.
	(linux_child_insert_fork_catchpoint): Call
	linux_supports_tracefork.
	(linux_child_insert_vfork_catchpoint): Likewise.
	(linux_child_set_syscall_catchpoint): Call
	linux_supports_tracesysgood.
	(lin_lwp_attach_lwp): Call linux_supports_tracefork.
	* nat/linux-nat.h: New file.
	* nat/linux-waitpid.c: New file.
	* nat/linux-waitpid.h: New file.

	gdb/gdbserver/
	* Makefile.in: Explain why ../target and ../nat are not
	listed as include file search paths.
	(linux-waitpid.o): New object file rule.
	* configure.srv (srv_native_linux_obj): New variable.
	Replace all occurrences of linux native object files with
	$srv_native_linux_obj.
	* linux-low.c: Include nat/linux-nat.h and nat/linux-waitpid.h.
	(HAS_NOMMU): Move defining logic to common/linux-ptrace.c.
	(linux_enable_event_reporting): Remove declaration.
	(my_waitpid): Moved to common/linux-waitpid.c.
	(linux_wait_for_event): Pass ptid when calling
	linux_enable_event_reporting.
	(linux_supports_tracefork_flag): Remove.
	(linux_enable_event_reporting): Likewise.
	(linux_tracefork_grandchild): Remove.
	(STACK_SIZE): Moved to common/linux-ptrace.c.
	(linux_tracefork_child): Remove.
	(linux_test_for_tracefork): Remove.
	(linux_look_up_symbols): Call linux_supports_traceclone.
	(initialize_low): Remove call to linux_test_for_tracefork.
	* linux-low.h (PTRACE_TYPE_ARG3): Move to
	common/linux-ptrace.h.
	(PTRACE_TYPE_ARG4): Likewise.
	Include linux-ptrace.h.
2013-08-22 23:46:30 +00:00
Yao Qi
aaee205620 gdb/
* Makefile.in (HFILES_NO_SRCDIR): Add
	common/mips-linux-watch.h.
	(mips-linux-watch.o): New rule.
	* common/mips-linux-watch.c: New.
	* common/mips-linux-watch.h: New.
	* config/mips/linux.mh (NATDEPFILES): Add mips-linux-watch.o
	* mips-linux-nat.c: Include mips-linux-watch.h.
	(W_BIT, R_BIT, I_BIT, W_MASK, R_MASK, I_MASK, IRW_MASK): Move
	to common/mips-linux-watch.h.
	(MAX_DEBUG_REGISTER): Likewise.
	(enum pt_watch_style): Likewise.
	(struct mips32_watch_regs): Likewise.
	(struct mips64_watch_regs): Likewise.
	(struct pt_watch_regs): Likewise.
	(struct mips_watchpoint): Likewise.
	(mips_linux_watch_get_irw_mask): Move to
	common/mips-linux-watch.c.
	(get_reg_mask, mips_linux_watch_get_num_valid): Likewise.
	(mips_linux_watch_get_watchlo): Likewise.
	(mips_linux_watch_set_watchlo): Likewise.
	(mips_linux_watch_get_watchhi): Likewise.
	(mips_linux_watch_set_watchhi): Likewise.
	(mips_linux_read_watch_registers): Likewise.
	(mips_linux_watch_type_to_irw): Likewise.
	(mips_linux_stopped_data_address, fill_mask): Likewise.
	(mips_linux_watch_try_one_watch): Likewise.
	(mips_linux_watch_populate_regs): Likewise.
2013-07-27 07:49:05 +00:00
Pedro Alves
d8d2a3ee47 Normalize on PATH_MAX instead of MAXPATHLEN throughout.
With the pathmax gnulib module in place, we can use PATH_MAX
consistently throughout, instead of the current mixbag of PATH_MAX and
MAXPATHLEN uses.  It's no longer necessary to include sys/param.h
(supposedly, I can't check all ports touched here) for MAXPATHLEN.

Don't remove sys/param.h from GDB's configure.ac, as later tests in
the file use HAVE_SYS_PARAM_H checks.

Tested on x86_64 Fedora 17.

Also cross-built for --host=i686-w64-mingw32, and --host=i586-pc-msdosdjgpp.

gdb/
2013-07-01  Pedro Alves  <palves@redhat.com>

	* defs.h: Include "pathmax.h".
	* utils.c: Don't include sys/param.h.
	(gdb_realpath): Remove code that checks for MAXPATHLEN.
	* solib-ia64-hpux.c (ia64_hpux_handle_load_event): Use PATH_MAX
	instead of MAXPATHLEN.
	* solib-sunos.c: Don't include sys/param.h.
	* xcoffread.c: Don't include sys/param.h.
	* bsd-kvm.c: Don't include sys/param.h.
	* darwin-nat.c: Don't include sys/param.h.
	(darwin_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
	* darwin-nat-info.c: Don't include sys/param.h.
	* fbsd-nat.c (fbsd_pid_to_exec_file): Use PATH_MAX instead of
	MAXPATHLEN.
	* i386obsd-nat.c: Don't include sys/param.h.
	* inf-child.c: Don't include sys/param.h.
	(inf_child_fileio_readlink): Use PATH_MAX instead of MAXPATHLEN.
	* linux-fork.c: Don't include sys/param.h.
	(fork_save_infrun_state): Use PATH_MAX instead of MAXPATHLEN.
	* linux-nat.c: Don't include sys/param.h.
	(linux_child_pid_to_exec_file, linux_proc_pending_signals)
	(linux_proc_pending_signals): Use PATH_MAX instead of MAXPATHLEN.
	* m68klinux-nat.c: Don't include sys/param.h.
	* nbsd-nat.c: Don't include sys/param.h.
	(nbsd_pid_to_exec_file): Use PATH_MAX instead of MAXPATHLEN.
	* ppc-linux-nat.c: Don't include sys/param.h.
	* rs6000-nat.c: Don't include sys/param.h.
	* spu-linux-nat.c. Don't include sys/param.h.
	* windows-nat.c: Don't include sys/param.h.
	* xtensa-linux-nat.c: Don't include sys/param.h.
	* config/i386/nm-fbsd.h: Don't include sys/param.h.

gdb/gdbserver/
2013-07-01  Pedro Alves  <palves@redhat.com>

	* server.h: Include "pathmax.h".
	* linux-low.c: Don't include sys/param.h.
	(linux_pid_exe_is_elf_64_file): Use PATH_MAX instead of
	MAXPATHLEN.
	* win32-low.c: Don't include sys/param.h.
	(win32_create_inferior): Use PATH_MAX instead of MAXPATHLEN.
2013-07-01 11:28:30 +00:00
Joel Brobecker
4d1eb6b4d2 Reimplement shared library support on ppc-aix...
... using the target_so_ops framework.

gdb/ChangeLog:

        * target.h (TARGET_OBJECT_AIX_LIBRARIES): New target_object enum.
        * features/library-list-aix.dtd: New file.
        * solib-aix.h, solib-aix.c: New file.
        * rs6000-aix-tdep.c: #include "solib.h" and "solib-aix.h".
        (rs6000_find_toc_address_hook): Delete.
        (rs6000_push_dummy_call): Rewrite code setting the TOC value.
        (rs6000_aix_init_osabi): Register solib_aix_so_ops.
        * rs6000-nat.c: Remove "xcoffsolib.h" include.  Include
        "xml-utils.h".
        (map_vmap, vmap_exec, vmap_ldinfo, add_vmap, objfile_symbol_add)
        (vmap_symtab, fixup_breakpoints): Delete.
        (rs6000_xfer_shared_libraries): New function.
        (rs6000_xfer_partial): Add TARGET_OBJECT_AIX_LIBRARIES handling.
        (vmap_secs, bss_data_overlap, vmap_add_symbols): Delete.
        (xcoff_relocate_symtab, xcoff_relocate_core): Delete.
        (rs6000_ptrace_ldinfo, rs6000_core_ldinfo)
        (rs6000_xfer_shared_library): New function.
        (find_toc_address): Delete.
        (_initialize_rs6000_nat): Do not set rs6000_find_toc_address_hook.
        * rs6000-tdep.h (rs6000_find_toc_address_hook): Remove.
        * xcoffread.c (record_minimal_symbol): Reloate symbol address
        before creating minimal symbol.  Adjust function description
        accordingly.
        (scan_xcoff_symtab): Replace call to
        prim_record_minimal_symbol_and_info by call to
        record_minimal_symbol.
        (xcoff_symfile_offsets): Reimplement mostly as a wrapper
        around default_symfile_offsets.
        * configure.tgt: Add solib-aix.o to gdb_target_obs for
        powerpc-aix targets.
        * config/rs6000/nm-rs6000.h: Delete.
        * config/powerpc/aix.mh (NAT_FILE): Delete.
        (NATDEPFILES): Remove xcoffsolib.o.
        * Makefile.in (XMLFILES): Add library-list-aix.dtd.
        (ALL_TARGET_OBS): Add solib-aix.o.
        (HFILES_NO_SRCDIR): Remove xcoffsolib.h and
        config/rs6000/nm-rs6000.h.  Add solib-aix.h.
        (ALLDEPFILES): Add solib-aix.c.  Remove xcoffsolib.c.
        * xcoffsolib.h, xcoffsolib.c: Delete.

        * solib.c (reload_shared_libraries): Remove reference to
        SOLIB_CREATE_INFERIOR_HOOK.
        * breakpoint.c (handle_solib_event): Remove reference to SOLIB_ADD.
        (disable_breakpoints_in_shlibs): Remove reference to PC_SOLIB.
        (momentary_bkpt_re_set): Replace SOLIB_ADD by solib_add in
        comment.
        * corelow.c (deprecated_core_resize_section_table): Delete.
        * exec.c: Remove include of xcoffsolib.h".
        (map_vmap, vmap): Delete.
        (exec_close_1): Remove references to vmap.
        (exec_file_attach): Remove vmap handling code, and reference
        to DEPRECATED_IBM6000_TARGET.
        (bfdsec_to_vmap): Delete.
        (exec_files_info): Remove block of code handling VMAP.
        * infcmd.c (post_create_inferior): Remove reference to
        SOLIB_CREATE_INFERIOR_HOOK and SOLIB_ADD.
        * infrun.c (follow_exec): Remove reference to
        SOLIB_CREATE_INFERIOR_HOOK.
        * stack.c (print_frame): Remove reference to PC_SOLIB.
        * solib-dsbt.c (dsbt_current_sos): Adjust comment.
        (dsbt_relocate_main_executable): Likewise.
        * solib-frv.c (frv_current_sos): Likewise.

gdb/doc/ChangeLog:

        * gdbint.texinfo (Algorithms): Remove entries documenting
        DEPRECATED_IBM6000_TARGET, SOLIB_ADD, and
        SOLIB_CREATE_INFERIOR_HOOK.
2013-05-06 14:15:50 +00:00
Jan Kratochvil
b292c78318 gdb/
* Makefile.in (HAVE_NATIVE_GCORE_TARGET): New.
	(generated_files): Add gcore.
	(install-only, uninstall): Add gcore if HAVE_NATIVE_GCORE_TARGET or
	HAVE_NATIVE_GCORE_HOST.
	(gcore): New.
	* NEWS (Changes since GDB 7.6): Mention newly installed gcore.
	* config/alpha/alpha-osf3.mh, config/i386/fbsd.mh,
	config/i386/fbsd64.mh, config/i386/i386gnu.mh, config/i386/i386sol2.mh,
	config/i386/sol2-64.mh, config/mips/irix5.mh, config/mips/irix6.mh,
	config/powerpc/fbsd.mh, config/sparc/fbsd.mh, config/sparc/sol2.mh:
	Add HAVE_NATIVE_GCORE_HOST.
	* configure: Regenerate.
	* configure.ac (HAVE_NATIVE_GCORE_TARGET): New, set it, AC_SUBST it.
	New AC_SUBST fir GDB_TRANSFORM_NAME and GCORE_TRANSFORM_NAME.  New
	AC_CONFIG_FILES for gcore.
	* configure.tgt: Add gdb_have_gcore to the initial comment.  Set
	gdb_have_gcore.
	* gdb_gcore.sh: Rename to ...
	* gcore.in: ... here.  Remove gcore.sh comment.  Use GDB_TRANSFORM_NAME
	and GCORE_TRANSFORM_NAME substitutions.

gdb/doc/
	* Makefile.in (MAN1S): Add gcore.1.
	Remove "Host, target, and site specific Makefile fragments" comment.
	(@host_makefile_frag@, HAVE_NATIVE_GCORE_TARGET): New.
	(install-man1, uninstall-man1): Conditionalize gcore.1.
	(gcore.1): New.
	* gdb.texinfo (Man Pages): Add gcore man.
	(gcore man): New node.
2013-04-11 14:13:44 +00:00