2005-11-17  Jan Beulich  <jbeulich@novell.com>


	* symbols.h (S_CLEAR_VOLATILE): Declare.
	* symbols.c (colon): Also accept redefinable symbols for
	redefinition. Clone them before modifying.
	(S_CLEAR_VOLATILE): Define.
	* cond.c (s_ifdef): Also test for equated symbols.
	* read.c (s_comm_internal): Also exclude non-redefinable
	equated symbols. Clone redefinable ones before modifying.
	(s_weakref): Clone redefinable symbols before modifying.
	* doc/internals.texi: Document sy_volatile, sy_forward_ref,
	S_IS_VOLATILE, S_SET_VOLATILE, S_CLEAR_VOLATILE,
	S_IS_FORWARD_REF, and S_SET_FORWARD_REF.

gas/testsuite/
2005-11-17  Jan Beulich  <jbeulich@novell.com>

	* gas/all/cond.s: Also check ifdef works on equates and
	commons.
	* gas/all/cond.l: Adjust.
	* gas/all/redef2.s: Also test redefining equate to label.
	* gas/all/redef2.d: Adjust.
	* gas/all/redef3.[sd]: New.
	* gas/all/redef4.s: New.
	* gas/all/redef5.s: New.
	* gas/elf/redef.s: New, copied from original gas/all/redef2.s.
	* gas/elf/redef.d: Remove #source.
	* gas/all/gas.exp: Remove exclusion of iq2000-*-* from and
	adjust xfails for redefinition tests. Run new tests. Exclude
	alpha*-*-*, mips*-*-*, *c54x*-*-* from weakref tests.
This commit is contained in:
Jan Beulich 2005-11-17 07:29:28 +00:00
parent 2be701a30f
commit 92757bc916
18 changed files with 190 additions and 19 deletions

View file

@ -1,3 +1,18 @@
2005-11-17 Jan Beulich <jbeulich@novell.com>
* symbols.h (S_CLEAR_VOLATILE): Declare.
* symbols.c (colon): Also accept redefinable symbols for
redefinition. Clone them before modifying.
(S_CLEAR_VOLATILE): Define.
* cond.c (s_ifdef): Also test for equated symbols.
* read.c (s_comm_internal): Also exclude non-redefinable
equated symbols. Clone redefinable ones before modifying.
(s_weakref): Clone redefinable symbols before modifying.
* doc/internals.texi: Document sy_volatile, sy_forward_ref,
S_IS_VOLATILE, S_SET_VOLATILE, S_CLEAR_VOLATILE,
S_IS_FORWARD_REF, and S_SET_FORWARD_REF.
2005-11-16 Alan Modra <amodra@bigpond.net.au>
* config/tc-hppa.c (pa_comm): Set bfd_com_section segment.

View file

@ -102,7 +102,7 @@ s_ifdef (int test_defined)
considered to be undefined. */
is_defined =
symbolP != NULL
&& S_IS_DEFINED (symbolP)
&& (S_IS_DEFINED (symbolP) || symbol_equated_p (symbolP))
&& S_GET_SEGMENT (symbolP) != reg_section;
cframe.ignoring = ! (test_defined ^ is_defined);

View file

@ -93,6 +93,12 @@ responsible for setting it when a symbol is used in backend routines.
Whether the symbol is an MRI common symbol created by the @code{COMMON}
pseudo-op when assembling in MRI mode.
@item sy_volatile
Whether the symbol can be re-defined.
@item sy_forward_ref
Whether the symbol's value must only be evaluated upon use.
@item sy_weakrefr
Whether the symbol is a @code{weakref} alias to another symbol.
@ -165,6 +171,16 @@ Return non-zero if the symbol is a @code{weakref} alias.
Return non-zero if the symbol was aliased by a @code{weakref} alias and has not
had any strong references.
@item S_IS_VOLATILE
@cindex S_IS_VOLATILE
Return non-zero if the symbol may be re-defined. Such symbols get created by
the @code{=} operator, @code{equ}, or @code{set}.
@item S_IS_FORWARD_REF
@cindex S_IS_FORWARD_REF
Return non-zero if the symbol is a forward reference, that is its value must
only be determined upon use.
@item S_IS_COMMON
@cindex S_IS_COMMON
Return non-zero if this is a common symbol. Common symbols are sometimes
@ -222,6 +238,19 @@ Clear the @code{weakref} aliased status of a symbol. This is implicitly called
whenever the symbol is looked up, as part of a direct reference or a
definition, but not as part of a @code{weakref} directive.
@item S_SET_VOLATILE
@cindex S_SET_VOLATILE
Indicate that the symbol may be re-defined.
@item S_CLEAR_VOLATILE
@cindex S_CLEAR_VOLATILE
Indicate that the symbol may no longer be re-defined.
@item S_SET_FORWARD_REF
@cindex S_SET_FORWARD_REF
Indicate that the symbol is a forward reference, that is its value must only
be determined upon use.
@item S_GET_TYPE
@item S_GET_DESC
@item S_GET_OTHER

View file

@ -1467,13 +1467,25 @@ s_comm_internal (int param,
*p = 0;
symbolP = symbol_find_or_make (name);
if (S_IS_DEFINED (symbolP) && !S_IS_COMMON (symbolP))
if ((S_IS_DEFINED (symbolP) || symbol_equated_p (symbolP))
&& !S_IS_COMMON (symbolP))
{
symbolP = NULL;
as_bad (_("symbol `%s' is already defined"), name);
*p = c;
ignore_rest_of_line ();
goto out;
if (!S_IS_VOLATILE (symbolP))
{
symbolP = NULL;
as_bad (_("symbol `%s' is already defined"), name);
*p = c;
ignore_rest_of_line ();
goto out;
}
/* This could be avoided when the symbol wasn't used so far, but
the comment in struc-symbol.h says this flag isn't reliable. */
if (1 || !symbol_used_p (symbolP))
symbolP = symbol_clone (symbolP, 1);
S_SET_SEGMENT (symbolP, undefined_section);
S_SET_VALUE (symbolP, 0);
symbol_set_frag (symbolP, &zero_address_frag);
S_CLEAR_VOLATILE (symbolP);
}
size = S_GET_VALUE (symbolP);
@ -3174,10 +3186,18 @@ s_weakref (int ignore ATTRIBUTE_UNUSED)
if (S_IS_DEFINED (symbolP) || symbol_equated_p (symbolP))
{
as_bad (_("symbol `%s' is already defined"), name);
*end_name = delim;
ignore_rest_of_line ();
return;
if(!S_IS_VOLATILE (symbolP))
{
as_bad (_("symbol `%s' is already defined"), name);
*end_name = delim;
ignore_rest_of_line ();
return;
}
/* This could be avoided when the symbol wasn't used so far, but
the comment in struc-symbol.h says this flag isn't reliable. */
if (1 || !symbol_used_p (symbolP))
symbolP = symbol_clone (symbolP, 1);
S_CLEAR_VOLATILE (symbolP);
}
*end_name = delim;

View file

@ -333,8 +333,18 @@ colon (/* Just seen "x:" - rattle symbols & frags. */
locsym->lsy_value = frag_now_fix ();
}
else if (!(S_IS_DEFINED (symbolP) || symbol_equated_p (symbolP))
|| S_IS_COMMON (symbolP))
|| S_IS_COMMON (symbolP)
|| S_IS_VOLATILE (symbolP))
{
if (S_IS_VOLATILE (symbolP)
/* This could be avoided when the symbol wasn't used so far, but
the comment in struc-symbol.h says this flag isn't reliable. */
&& (1 || !symbol_used_p (symbolP)))
{
symbolP = symbol_clone (symbolP, 1);
S_SET_VALUE (symbolP, 0);
S_CLEAR_VOLATILE (symbolP);
}
if (S_GET_VALUE (symbolP) == 0)
{
symbolP->sy_frag = frag_now;
@ -421,7 +431,10 @@ colon (/* Just seen "x:" - rattle symbols & frags. */
if (!(frag_now == symbolP->sy_frag
&& S_GET_VALUE (symbolP) == frag_now_fix ()
&& S_GET_SEGMENT (symbolP) == now_seg))
as_bad (_("symbol `%s' is already defined"), sym_name);
{
as_bad (_("symbol `%s' is already defined"), sym_name);
symbolP = symbol_clone (symbolP, 0);
}
}
}
@ -2186,6 +2199,13 @@ S_SET_VOLATILE (symbolS *s)
s->sy_volatile = 1;
}
void
S_CLEAR_VOLATILE (symbolS *s)
{
if (!LOCAL_SYMBOL_CHECK (s))
s->sy_volatile = 0;
}
void
S_SET_FORWARD_REF (symbolS *s)
{

View file

@ -108,6 +108,7 @@ extern void S_SET_WEAKREFD (symbolS *);
extern void S_CLEAR_WEAKREFD (symbolS *);
extern void S_SET_THREAD_LOCAL (symbolS *);
extern void S_SET_VOLATILE (symbolS *);
extern void S_CLEAR_VOLATILE (symbolS *);
extern void S_SET_FORWARD_REF (symbolS *);
#ifndef WORKING_DOT_WORD

View file

@ -1,3 +1,19 @@
2005-11-17 Jan Beulich <jbeulich@novell.com>
* gas/all/cond.s: Also check ifdef works on equates and
commons.
* gas/all/cond.l: Adjust.
* gas/all/redef2.s: Also test redefining equate to label.
* gas/all/redef2.d: Adjust.
* gas/all/redef3.[sd]: New.
* gas/all/redef4.s: New.
* gas/all/redef5.s: New.
* gas/elf/redef.s: New, copied from original gas/all/redef2.s.
* gas/elf/redef.d: Remove #source.
* gas/all/gas.exp: Remove exclusion of iq2000-*-* from and
adjust xfails for redefinition tests. Run new tests. Exclude
alpha*-*-*, mips*-*-*, *c54x*-*-* from weakref tests.
2005-11-16 Richard Henderson <rth@redhat.com>
* gas/all/weakref1.s: Use "=" instead of ".set" for equivalence.

View file

@ -24,7 +24,13 @@
29[ ]+.else
31[ ]+.endif
[ ]*[1-9][0-9]*[ ]+
[ ]*[1-9][0-9]*[ ]+\.comm[ ]+c,[ ]*1[ ]*
[ ]*[1-9][0-9]*[ ]+\.ifndef[ ]+c[ ]*
[ ]*[1-9][0-9]*[ ]+\.endif[ ]*
[ ]*[1-9][0-9]*[ ]+
[ ]*[1-9][0-9]*[ ]+\.equiv[ ]+x,[ ]*y[ ]*
[ ]*[1-9][0-9]*[ ]+\.ifndef[ ]+x[ ]*
[ ]*[1-9][0-9]*[ ]+\.endif[ ]*
[ ]*[1-9][0-9]*[ ]+\.equiv[ ]+y,[ ]*0[ ]*
[ ]*[1-9][0-9]*[ ]+\.if[ ]+x[ ]*
[ ]*[1-9][0-9]*[ ]+\.elseif[ ]+x[ ]*

View file

@ -30,7 +30,15 @@
.long 9
.endif
.comm c, 1
.ifndef c
.err
.endif
.equiv x, y
.ifndef x
.err
.endif
.equiv y, 0
.if x
.err

View file

@ -74,16 +74,24 @@ case $target_triplet in {
# .set works differently on some targets.
case $target_triplet in {
{ alpha*-*-* } { }
{ iq2000*-*-* } { }
{ mips*-*-* } { }
{ *c54x*-*-* } { }
{ z80-*-* } { }
default {
setup_xfail "*c30*-*-*" "*c4x*-*-*" "pdp11-*-*"
run_dump_test redef
setup_xfail "*c30*-*-*" "*c4x*-*-*" "*arm*-*-coff" "arm*-*-pe*" "crx*-*-*"
setup_xfail "h8300*-*-*" "m68hc*-*-*" "maxq-*-*" "pdp11-*-*" "vax*-*-*" "z8k-*-*"
setup_xfail "*c30*-*-*" "*c4x*-*-*" "*arm*-*-*aout*" "*arm*-*-*coff" \
"*arm*-*-pe" "crx*-*-*" "h8300*-*-*" "m68hc*-*-*" "maxq-*-*" \
"pdp11-*-*" "vax*-*-*" "z8k-*-*"
run_dump_test redef2
setup_xfail "*-*-aix*" "*-*-coff" "*-*-cygwin" "*-*-mingw*" "*-*-pe*" \
"bfin-*-*" "*c4x*-*-*" "crx*-*-*" "h8300*-*-*" "m68hc*-*-*" \
"maxq-*-*" "or32-*-*" "pdp11-*-*" "vax*-*-*" "z8k-*-*"
run_dump_test redef3
setup_xfail "*c4x*-*-*"
gas_test_error "redef4.s" "" ".set for symbol already used as label"
setup_xfail "*c4x*-*-*"
gas_test_error "redef5.s" "" ".set for symbol already defined through .comm"
}
}
@ -256,6 +264,9 @@ if { ![istarget "i960-*-*"] } {
# .set works differently on some targets.
case $target_triplet in {
{ alpha*-*-* } { }
{ mips*-*-* } { }
{ *c54x*-*-* } { }
{ z80-*-* } { }
default {
run_dump_test weakref1

View file

@ -5,9 +5,11 @@
RELOCATION RECORDS FOR .*
.*
0+0.*(here|\.data)
0+8.*xtrn
0+00.*(here|\.data)
0+08.*xtrn
0+10.*(sym|\.data(\+0x0+10)?)
#...
Contents of section \.data:
0000 00000000 11111111 00000000 22222222[ ]+................[ ]*
0010 [01]00000[01]0 .*
#pass

View file

@ -8,3 +8,5 @@ here:
.long sym
.set sym, 0x22222222
.long sym
sym:
.long sym

View file

@ -0,0 +1,15 @@
#objdump: -rsj .data
#name: .equ redefinitions (3)
.*: .*
RELOCATION RECORDS FOR .*
.*
0+00.*(here|\.data)
0+08.*xtrn
0+10.*sym
#...
Contents of section \.data:
0000 00000000 11111111 00000000 22222222[ ]+................[ ]*
0010 00000000 .*
#pass

View file

@ -0,0 +1,12 @@
.data
here:
.set sym, here
.long sym
.set sym, 0x11111111
.long sym
.set sym, xtrn
.long sym
.set sym, 0x22222222
.long sym
.comm sym, 1
.long sym

View file

@ -0,0 +1,3 @@
.data
sym:
.set sym, 0

View file

@ -0,0 +1,2 @@
.comm sym, 1
.set sym, 0

View file

@ -1,6 +1,5 @@
#objdump: -t
#name: .equ redefinitions (ELF)
#source: ../all/redef2.s
.*: .*

View file

@ -0,0 +1,10 @@
.data
here:
.set sym, here
.long sym
.set sym, 0x11111111
.long sym
.set sym, xtrn
.long sym
.set sym, 0x22222222
.long sym