2002-10-02 Nathanael Nerode <neroden@gcc.gnu.org>

* Makefile.tpl: Remove material now in src-release.  (Finally!)
	* Makefile.in: Regenerate.
This commit is contained in:
Nathanael Nerode 2002-10-02 06:22:08 +00:00
parent da615bee0d
commit 8412ce72a2
3 changed files with 3 additions and 574 deletions

View file

@ -1,5 +1,8 @@
2002-10-02 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.tpl: Remove material now in src-release. (Finally!)
* Makefile.in: Regenerate.
* configure: Restore my original patch by syncing with gcc version.
* Bring following over from gcc:

View file

@ -124,9 +124,6 @@ NM = nm
LD = ld
BZIPPROG = bzip2
MD5PROG = md5sum
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
@ -1807,290 +1804,6 @@ Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
# Support for building net releases
# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.if config.sub config move-if-change \
mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
mkinstalldirs ltconfig ltmain.sh missing ylwrap \
libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
make-stds.texi standards.info* configure.texi configure.info* \
configbuild.* configdev.*
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
# NOTE: No double quotes in the below. It is used within shell script
# as VER="$(VER)"
VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
elif test -f $(TOOL)/version.in; then \
head -1 $(TOOL)/version.in; \
elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
else \
echo VERSION; \
fi`
PACKAGE = $(TOOL)
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-md5sum \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: gdb-tar
gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-md5sum \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-djunpack \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: gdb-taz
gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in gdb-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: do-proto-toplev
do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
echo "==> Making $(PACKAGE)-$(VER)/"
# Take out texinfo from a few places.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
<Makefile.in >tmp
mv -f tmp Makefile.in
#
./configure sun4
[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
|| $(MAKE) $(CONFIGURE_TARGET_MODULES) \
ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
# Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
if [ ! -f $$d/Makefile ] ; then true ; \
elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
elif grep '^info:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) info ) || exit 1 ; \
fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
ln -s ../$$d proto-toplev/$$d ; \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
cd etc && $(MAKE) info
$(MAKE) distclean
#
mkdir proto-toplev/etc
(cd proto-toplev/etc; \
for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
done)
#
# Take out texinfo from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
<configure.in >proto-toplev/configure.in
#
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
if test -r texinfo/util/tex3patch ; then \
mkdir proto-toplev/texinfo/util && \
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
else true; fi
chmod -R og=u . || chmod og=u `find . -print`
#
# Create .gmo files from .po files.
for f in `find . -name '*.po' -type f -print`; do \
msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
done
#
-rm -f $(PACKAGE)-$(VER)
ln -s proto-toplev $(PACKAGE)-$(VER)
.PHONY: do-tar
do-tar:
echo "==> Making $(PACKAGE)-$(VER).tar"
-rm -f $(PACKAGE)-$(VER).tar
find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
| tar cTfh - $(PACKAGE)-$(VER).tar
.PHONY: do-bz2
do-bz2:
echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
-rm -f $(PACKAGE)-$(VER).tar.bz2
$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
.PHONY: do-md5sum
do-md5sum:
echo "==> Adding md5 checksum to top-level directory"
cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
| xargs $(MD5PROG) > ../md5.sum
mv md5.sum proto-toplev
.PHONY: do-djunpack
do-djunpack:
echo "==> Adding updated djunpack.bat to top-level directory"
echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
sed < djunpack.bat > djunpack.new \
-e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
mv djunpack.new djunpack.bat
-rm -f proto-toplev/djunpack.bat
ln -s ../djunpack.bat proto-toplev/djunpack.bat
TEXINFO_SUPPORT= texinfo/texinfo.tex
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.bz2
GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.bz2
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
.PHONY: gas+binutils.tar.bz2
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.bz2
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
.PHONY: gdb.tar
gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
$(MAKE) -f Makefile.in taz TOOL=dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar.bz2
GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar
gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight.tar
insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar
insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss
# taz configures for the sun4 target which won't configure newlib.
# We need newlib configured so that the .info files are made.
# Unfortunately, it is not enough to just configure newlib separately:
# taz will build the .info files but since SUBDIRS won't contain newlib,
# distclean won't be run (leaving Makefile, config.status, and the tmp files
# used in building the .info files, eg: *.def, *.ref).
# The problem isn't solvable however without a lot of extra work because
# target libraries are built in subdir $(target_alias) which gets nuked during
# the make distclean. For now punt on the issue of shipping newlib info files
# with newlib net releases and wait for a day when some native target (sun4?)
# supports newlib (if only minimally).
newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
$(MAKE) -f Makefile.in taz TOOL=newlib \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=

View file

@ -127,9 +127,6 @@ NM = nm
LD = ld
BZIPPROG = bzip2
MD5PROG = md5sum
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
@ -1508,290 +1505,6 @@ Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
# Support for building net releases
# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.if config.sub config move-if-change \
mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
mkinstalldirs ltconfig ltmain.sh missing ylwrap \
libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
make-stds.texi standards.info* configure.texi configure.info* \
configbuild.* configdev.*
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
# NOTE: No double quotes in the below. It is used within shell script
# as VER="$(VER)"
VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
elif test -f $(TOOL)/version.in; then \
head -1 $(TOOL)/version.in; \
elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
else \
echo VERSION; \
fi`
PACKAGE = $(TOOL)
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-md5sum \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: gdb-tar
gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-md5sum \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-djunpack \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: gdb-taz
gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in gdb-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: do-proto-toplev
do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
echo "==> Making $(PACKAGE)-$(VER)/"
# Take out texinfo from a few places.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
<Makefile.in >tmp
mv -f tmp Makefile.in
#
./configure sun4
[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
|| $(MAKE) $(CONFIGURE_TARGET_MODULES) \
ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
# Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
if [ ! -f $$d/Makefile ] ; then true ; \
elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
elif grep '^info:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) info ) || exit 1 ; \
fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
ln -s ../$$d proto-toplev/$$d ; \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
cd etc && $(MAKE) info
$(MAKE) distclean
#
mkdir proto-toplev/etc
(cd proto-toplev/etc; \
for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
done)
#
# Take out texinfo from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
<configure.in >proto-toplev/configure.in
#
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
if test -r texinfo/util/tex3patch ; then \
mkdir proto-toplev/texinfo/util && \
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
else true; fi
chmod -R og=u . || chmod og=u `find . -print`
#
# Create .gmo files from .po files.
for f in `find . -name '*.po' -type f -print`; do \
msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
done
#
-rm -f $(PACKAGE)-$(VER)
ln -s proto-toplev $(PACKAGE)-$(VER)
.PHONY: do-tar
do-tar:
echo "==> Making $(PACKAGE)-$(VER).tar"
-rm -f $(PACKAGE)-$(VER).tar
find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
| tar cTfh - $(PACKAGE)-$(VER).tar
.PHONY: do-bz2
do-bz2:
echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
-rm -f $(PACKAGE)-$(VER).tar.bz2
$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
.PHONY: do-md5sum
do-md5sum:
echo "==> Adding md5 checksum to top-level directory"
cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
| xargs $(MD5PROG) > ../md5.sum
mv md5.sum proto-toplev
.PHONY: do-djunpack
do-djunpack:
echo "==> Adding updated djunpack.bat to top-level directory"
echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
sed < djunpack.bat > djunpack.new \
-e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
mv djunpack.new djunpack.bat
-rm -f proto-toplev/djunpack.bat
ln -s ../djunpack.bat proto-toplev/djunpack.bat
TEXINFO_SUPPORT= texinfo/texinfo.tex
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.bz2
GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.bz2
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
.PHONY: gas+binutils.tar.bz2
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.bz2
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
.PHONY: gdb.tar
gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
$(MAKE) -f Makefile.in taz TOOL=dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar.bz2
GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar
gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight.tar
insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar
insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss
# taz configures for the sun4 target which won't configure newlib.
# We need newlib configured so that the .info files are made.
# Unfortunately, it is not enough to just configure newlib separately:
# taz will build the .info files but since SUBDIRS won't contain newlib,
# distclean won't be run (leaving Makefile, config.status, and the tmp files
# used in building the .info files, eg: *.def, *.ref).
# The problem isn't solvable however without a lot of extra work because
# target libraries are built in subdir $(target_alias) which gets nuked during
# the make distclean. For now punt on the issue of shipping newlib info files
# with newlib net releases and wait for a day when some native target (sun4?)
# supports newlib (if only minimally).
newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
$(MAKE) -f Makefile.in taz TOOL=newlib \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=