old-cross-binutils/gdb/lynx-nat.c

837 lines
20 KiB
C
Raw Normal View History

/* Native-dependent code for LynxOS.
Copyright 1993, 1994 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
1995-08-02 03:41:12 +00:00
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "target.h"
#include "gdbcore.h"
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <sys/fpp.h>
static unsigned long registers_addr PARAMS ((int pid));
#define X(ENTRY)(offsetof(struct econtext, ENTRY))
#ifdef I386
/* Mappings from tm-i386v.h */
static int regmap[] =
{
X(eax),
X(ecx),
X(edx),
X(ebx),
X(esp), /* sp */
X(ebp), /* fp */
X(esi),
X(edi),
X(eip), /* pc */
X(flags), /* ps */
X(cs),
X(ss),
X(ds),
X(es),
X(ecode), /* Lynx doesn't give us either fs or gs, so */
X(fault), /* we just substitute these two in the hopes
that they are useful. */
};
#endif /* I386 */
#ifdef M68K
/* Mappings from tm-m68k.h */
static int regmap[] =
{
X(regs[0]), /* d0 */
X(regs[1]), /* d1 */
X(regs[2]), /* d2 */
X(regs[3]), /* d3 */
X(regs[4]), /* d4 */
X(regs[5]), /* d5 */
X(regs[6]), /* d6 */
X(regs[7]), /* d7 */
X(regs[8]), /* a0 */
X(regs[9]), /* a1 */
X(regs[10]), /* a2 */
X(regs[11]), /* a3 */
X(regs[12]), /* a4 */
X(regs[13]), /* a5 */
X(regs[14]), /* fp */
offsetof (st_t, usp) - offsetof (st_t, ec), /* sp */
X(status), /* ps */
X(pc),
X(fregs[0*3]), /* fp0 */
X(fregs[1*3]), /* fp1 */
X(fregs[2*3]), /* fp2 */
X(fregs[3*3]), /* fp3 */
X(fregs[4*3]), /* fp4 */
X(fregs[5*3]), /* fp5 */
X(fregs[6*3]), /* fp6 */
X(fregs[7*3]), /* fp7 */
X(fcregs[0]), /* fpcontrol */
X(fcregs[1]), /* fpstatus */
X(fcregs[2]), /* fpiaddr */
X(ssw), /* fpcode */
X(fault), /* fpflags */
};
#endif /* M68K */
#ifdef SPARC
/* Mappings from tm-sparc.h */
#define FX(ENTRY)(offsetof(struct fcontext, ENTRY))
static int regmap[] =
{
-1, /* g0 */
X(g1),
X(g2),
X(g3),
X(g4),
-1, /* g5->g7 aren't saved by Lynx */
-1,
-1,
X(o[0]),
X(o[1]),
X(o[2]),
X(o[3]),
X(o[4]),
X(o[5]),
X(o[6]), /* sp */
X(o[7]), /* ra */
-1,-1,-1,-1,-1,-1,-1,-1, /* l0 -> l7 */
-1,-1,-1,-1,-1,-1,-1,-1, /* i0 -> i7 */
FX(f.fregs[0]), /* f0 */
FX(f.fregs[1]),
FX(f.fregs[2]),
FX(f.fregs[3]),
FX(f.fregs[4]),
FX(f.fregs[5]),
FX(f.fregs[6]),
FX(f.fregs[7]),
FX(f.fregs[8]),
FX(f.fregs[9]),
FX(f.fregs[10]),
FX(f.fregs[11]),
FX(f.fregs[12]),
FX(f.fregs[13]),
FX(f.fregs[14]),
FX(f.fregs[15]),
FX(f.fregs[16]),
FX(f.fregs[17]),
FX(f.fregs[18]),
FX(f.fregs[19]),
FX(f.fregs[20]),
FX(f.fregs[21]),
FX(f.fregs[22]),
FX(f.fregs[23]),
FX(f.fregs[24]),
FX(f.fregs[25]),
FX(f.fregs[26]),
FX(f.fregs[27]),
FX(f.fregs[28]),
FX(f.fregs[29]),
FX(f.fregs[30]),
FX(f.fregs[31]),
X(y),
X(psr),
X(wim),
X(tbr),
X(pc),
X(npc),
FX(fsr), /* fpsr */
-1, /* cpsr */
};
#endif /* SPARC */
#ifdef rs6000
static int regmap[] =
{
X(iregs[0]), /* r0 */
X(iregs[1]),
X(iregs[2]),
X(iregs[3]),
X(iregs[4]),
X(iregs[5]),
X(iregs[6]),
X(iregs[7]),
X(iregs[8]),
X(iregs[9]),
X(iregs[10]),
X(iregs[11]),
X(iregs[12]),
X(iregs[13]),
X(iregs[14]),
X(iregs[15]),
X(iregs[16]),
X(iregs[17]),
X(iregs[18]),
X(iregs[19]),
X(iregs[20]),
X(iregs[21]),
X(iregs[22]),
X(iregs[23]),
X(iregs[24]),
X(iregs[25]),
X(iregs[26]),
X(iregs[27]),
X(iregs[28]),
X(iregs[29]),
X(iregs[30]),
X(iregs[31]),
X(fregs[0]), /* f0 */
X(fregs[1]),
X(fregs[2]),
X(fregs[3]),
X(fregs[4]),
X(fregs[5]),
X(fregs[6]),
X(fregs[7]),
X(fregs[8]),
X(fregs[9]),
X(fregs[10]),
X(fregs[11]),
X(fregs[12]),
X(fregs[13]),
X(fregs[14]),
X(fregs[15]),
X(fregs[16]),
X(fregs[17]),
X(fregs[18]),
X(fregs[19]),
X(fregs[20]),
X(fregs[21]),
X(fregs[22]),
X(fregs[23]),
X(fregs[24]),
X(fregs[25]),
X(fregs[26]),
X(fregs[27]),
X(fregs[28]),
X(fregs[29]),
X(fregs[30]),
X(fregs[31]),
X(srr0), /* IAR (PC) */
X(srr1), /* MSR (PS) */
X(cr), /* CR */
X(lr), /* LR */
X(ctr), /* CTR */
X(xer), /* XER */
X(mq) /* MQ */
};
#endif /* rs6000 */
#ifdef SPARC
/* This routine handles some oddball cases for Sparc registers and LynxOS.
In partucular, it causes refs to G0, g5->7, and all fp regs to return zero.
It also handles knows where to find the I & L regs on the stack. */
void
fetch_inferior_registers (regno)
int regno;
{
int whatregs = 0;
#define WHATREGS_FLOAT 1
#define WHATREGS_GEN 2
#define WHATREGS_STACK 4
if (regno == -1)
whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
whatregs = WHATREGS_STACK;
else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
whatregs = WHATREGS_FLOAT;
else
whatregs = WHATREGS_GEN;
if (whatregs & WHATREGS_GEN)
{
struct econtext ec; /* general regs */
char buf[MAX_REGISTER_RAW_SIZE];
int retval;
int i;
errno = 0;
retval = ptrace (PTRACE_GETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_GETREGS)");
memset (buf, 0, REGISTER_RAW_SIZE (G0_REGNUM));
supply_register (G0_REGNUM, buf);
supply_register (TBR_REGNUM, (char *)&ec.tbr);
memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &ec.g1,
4 * REGISTER_RAW_SIZE (G1_REGNUM));
for (i = G1_REGNUM; i <= G1_REGNUM + 3; i++)
register_valid[i] = 1;
supply_register (PS_REGNUM, (char *)&ec.psr);
supply_register (Y_REGNUM, (char *)&ec.y);
supply_register (PC_REGNUM, (char *)&ec.pc);
supply_register (NPC_REGNUM, (char *)&ec.npc);
supply_register (WIM_REGNUM, (char *)&ec.wim);
memcpy (&registers[REGISTER_BYTE (O0_REGNUM)], ec.o,
8 * REGISTER_RAW_SIZE (O0_REGNUM));
for (i = O0_REGNUM; i <= O0_REGNUM + 7; i++)
register_valid[i] = 1;
}
if (whatregs & WHATREGS_STACK)
{
CORE_ADDR sp;
int i;
sp = read_register (SP_REGNUM);
target_xfer_memory (sp + FRAME_SAVED_I0,
&registers[REGISTER_BYTE(I0_REGNUM)],
8 * REGISTER_RAW_SIZE (I0_REGNUM), 0);
for (i = I0_REGNUM; i <= I7_REGNUM; i++)
register_valid[i] = 1;
target_xfer_memory (sp + FRAME_SAVED_L0,
&registers[REGISTER_BYTE(L0_REGNUM)],
8 * REGISTER_RAW_SIZE (L0_REGNUM), 0);
for (i = L0_REGNUM; i <= L0_REGNUM + 7; i++)
register_valid[i] = 1;
}
if (whatregs & WHATREGS_FLOAT)
{
struct fcontext fc; /* fp regs */
int retval;
int i;
errno = 0;
retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_GETFPREGS)");
memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], fc.f.fregs,
32 * REGISTER_RAW_SIZE (FP0_REGNUM));
for (i = FP0_REGNUM; i <= FP0_REGNUM + 31; i++)
register_valid[i] = 1;
supply_register (FPS_REGNUM, (char *)&fc.fsr);
}
}
/* This routine handles storing of the I & L regs for the Sparc. The trick
here is that they actually live on the stack. The really tricky part is
that when changing the stack pointer, the I & L regs must be written to
where the new SP points, otherwise the regs will be incorrect when the
process is started up again. We assume that the I & L regs are valid at
this point. */
void
store_inferior_registers (regno)
int regno;
{
int whatregs = 0;
if (regno == -1)
whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
whatregs = WHATREGS_STACK;
else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
whatregs = WHATREGS_FLOAT;
else if (regno == SP_REGNUM)
whatregs = WHATREGS_STACK | WHATREGS_GEN;
else
whatregs = WHATREGS_GEN;
if (whatregs & WHATREGS_GEN)
{
struct econtext ec; /* general regs */
int retval;
ec.tbr = read_register (TBR_REGNUM);
memcpy (&ec.g1, &registers[REGISTER_BYTE (G1_REGNUM)],
4 * REGISTER_RAW_SIZE (G1_REGNUM));
ec.psr = read_register (PS_REGNUM);
ec.y = read_register (Y_REGNUM);
ec.pc = read_register (PC_REGNUM);
ec.npc = read_register (NPC_REGNUM);
ec.wim = read_register (WIM_REGNUM);
memcpy (ec.o, &registers[REGISTER_BYTE (O0_REGNUM)],
8 * REGISTER_RAW_SIZE (O0_REGNUM));
errno = 0;
retval = ptrace (PTRACE_SETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_SETREGS)");
}
if (whatregs & WHATREGS_STACK)
{
int regoffset;
CORE_ADDR sp;
sp = read_register (SP_REGNUM);
if (regno == -1 || regno == SP_REGNUM)
{
if (!register_valid[L0_REGNUM+5])
abort();
target_xfer_memory (sp + FRAME_SAVED_I0,
&registers[REGISTER_BYTE (I0_REGNUM)],
8 * REGISTER_RAW_SIZE (I0_REGNUM), 1);
target_xfer_memory (sp + FRAME_SAVED_L0,
&registers[REGISTER_BYTE (L0_REGNUM)],
8 * REGISTER_RAW_SIZE (L0_REGNUM), 1);
}
else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
{
if (!register_valid[regno])
abort();
if (regno >= L0_REGNUM && regno <= L0_REGNUM + 7)
regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (L0_REGNUM)
+ FRAME_SAVED_L0;
else
regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (I0_REGNUM)
+ FRAME_SAVED_I0;
target_xfer_memory (sp + regoffset, &registers[REGISTER_BYTE (regno)],
REGISTER_RAW_SIZE (regno), 1);
}
}
if (whatregs & WHATREGS_FLOAT)
{
struct fcontext fc; /* fp regs */
int retval;
/* We read fcontext first so that we can get good values for fq_t... */
errno = 0;
retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_GETFPREGS)");
memcpy (fc.f.fregs, &registers[REGISTER_BYTE (FP0_REGNUM)],
32 * REGISTER_RAW_SIZE (FP0_REGNUM));
fc.fsr = read_register (FPS_REGNUM);
errno = 0;
retval = ptrace (PTRACE_SETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_SETFPREGS)");
}
}
#endif /* SPARC */
#if defined (I386) || defined (M68K) || defined (rs6000)
/* Return the offset relative to the start of the per-thread data to the
saved context block. */
static unsigned long
registers_addr(pid)
int pid;
{
CORE_ADDR stblock;
int ecpoff = offsetof(st_t, ecp);
CORE_ADDR ecp;
errno = 0;
stblock = (CORE_ADDR) ptrace (PTRACE_THREADUSER, pid, (PTRACE_ARG3_TYPE)0,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_THREADUSER)");
ecp = (CORE_ADDR) ptrace (PTRACE_PEEKTHREAD, pid, (PTRACE_ARG3_TYPE)ecpoff,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_PEEKTHREAD)");
return ecp - stblock;
}
/* Fetch one or more registers from the inferior. REGNO == -1 to get
them all. We actually fetch more than requested, when convenient,
marking them as valid so we won't fetch them again. */
void
fetch_inferior_registers (regno)
int regno;
{
int reglo, reghi;
int i;
unsigned long ecp;
if (regno == -1)
{
reglo = 0;
reghi = NUM_REGS - 1;
}
else
reglo = reghi = regno;
ecp = registers_addr (inferior_pid);
for (regno = reglo; regno <= reghi; regno++)
{
char buf[MAX_REGISTER_RAW_SIZE];
int ptrace_fun = PTRACE_PEEKTHREAD;
#ifdef M68K
ptrace_fun = regno == SP_REGNUM ? PTRACE_PEEKUSP : PTRACE_PEEKTHREAD;
#endif
for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
{
unsigned int reg;
errno = 0;
reg = ptrace (ptrace_fun, inferior_pid,
(PTRACE_ARG3_TYPE) (ecp + regmap[regno] + i), 0);
if (errno)
perror_with_name ("ptrace(PTRACE_PEEKUSP)");
*(int *)&buf[i] = reg;
}
supply_register (regno, buf);
}
}
/* Store our register values back into the inferior.
If REGNO is -1, do this for all registers.
Otherwise, REGNO specifies which register (so we can save time). */
/* Registers we shouldn't try to store. */
#if !defined (CANNOT_STORE_REGISTER)
#define CANNOT_STORE_REGISTER(regno) 0
#endif
void
store_inferior_registers (regno)
int regno;
{
int reglo, reghi;
int i;
unsigned long ecp;
if (regno == -1)
{
reglo = 0;
reghi = NUM_REGS - 1;
}
else
reglo = reghi = regno;
ecp = registers_addr (inferior_pid);
for (regno = reglo; regno <= reghi; regno++)
{
int ptrace_fun = PTRACE_POKEUSER;
if (CANNOT_STORE_REGISTER (regno))
continue;
#ifdef M68K
ptrace_fun = regno == SP_REGNUM ? PTRACE_POKEUSP : PTRACE_POKEUSER;
#endif
for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
{
unsigned int reg;
reg = *(unsigned int *)&registers[REGISTER_BYTE (regno) + i];
errno = 0;
ptrace (ptrace_fun, inferior_pid,
(PTRACE_ARG3_TYPE) (ecp + regmap[regno] + i), reg);
if (errno)
perror_with_name ("ptrace(PTRACE_POKEUSP)");
}
}
}
#endif /* defined (I386) || defined (M68K) || defined (rs6000) */
/* Wait for child to do something. Return pid of child, or -1 in case
of error; store status through argument pointer OURSTATUS. */
int
child_wait (pid, ourstatus)
int pid;
struct target_waitstatus *ourstatus;
{
int save_errno;
int thread;
union wait status;
while (1)
{
int sig;
set_sigint_trap(); /* Causes SIGINT to be passed on to the
attached process. */
pid = wait (&status);
save_errno = errno;
clear_sigint_trap();
if (pid == -1)
{
if (save_errno == EINTR)
continue;
fprintf_unfiltered (gdb_stderr, "Child process unexpectedly missing: %s.\n",
safe_strerror (save_errno));
/* Claim it exited with unknown signal. */
ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
return -1;
}
if (pid != PIDGET (inferior_pid)) /* Some other process?!? */
continue;
thread = status.w_tid; /* Get thread id from status */
/* Initial thread value can only be acquired via wait, so we have to
resort to this hack. */
if (TIDGET (inferior_pid) == 0 && thread != 0)
{
inferior_pid = BUILDPID (inferior_pid, thread);
add_thread (inferior_pid);
}
pid = BUILDPID (pid, thread);
/* We've become a single threaded process again. */
if (thread == 0)
inferior_pid = pid;
/* Check for thread creation. */
if (WIFSTOPPED(status)
&& WSTOPSIG(status) == SIGTRAP
&& !in_thread_list (pid))
{
int realsig;
realsig = ptrace (PTRACE_GETTRACESIG, pid, (PTRACE_ARG3_TYPE)0, 0);
if (realsig == SIGNEWTHREAD)
{
/* It's a new thread notification. We don't want to much with
realsig -- the code in wait_for_inferior expects SIGTRAP. */
ourstatus->kind = TARGET_WAITKIND_SPURIOUS;
ourstatus->value.sig = TARGET_SIGNAL_0;
return pid;
}
else
error ("Signal for unknown thread was not SIGNEWTHREAD");
}
/* Check for thread termination. */
else if (WIFSTOPPED(status)
&& WSTOPSIG(status) == SIGTRAP
&& in_thread_list (pid))
{
int realsig;
realsig = ptrace (PTRACE_GETTRACESIG, pid, (PTRACE_ARG3_TYPE)0, 0);
if (realsig == SIGTHREADEXIT)
{
ptrace (PTRACE_CONT, PIDGET (pid), (PTRACE_ARG3_TYPE)0, 0);
continue;
}
}
#ifdef SPARC
/* SPARC Lynx uses an byte reversed wait status; we must use the
host macros to access it. These lines just a copy of
store_waitstatus. We can't use CHILD_SPECIAL_WAITSTATUS
because target.c can't include the Lynx <sys/wait.h>. */
if (WIFEXITED (status))
{
ourstatus->kind = TARGET_WAITKIND_EXITED;
ourstatus->value.integer = WEXITSTATUS (status);
}
else if (!WIFSTOPPED (status))
{
ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
ourstatus->value.sig =
target_signal_from_host (WTERMSIG (status));
}
else
{
ourstatus->kind = TARGET_WAITKIND_STOPPED;
ourstatus->value.sig =
target_signal_from_host (WSTOPSIG (status));
}
#else
store_waitstatus (ourstatus, status.w_status);
#endif
return pid;
}
}
/* Return nonzero if the given thread is still alive. */
int
child_thread_alive (pid)
int pid;
{
/* Arggh. Apparently pthread_kill only works for threads within
the process that calls pthread_kill.
We want to avoid the lynx signal extensions as they simply don't
map well to the generic gdb interface we want to keep.
All we want to do is determine if a particular thread is alive;
it appears as if we can just make a harmless thread specific
ptrace call to do that. */
return (ptrace (PTRACE_THREADUSER, pid, 0, 0) != -1);
}
* configure.in: Add nlm subdir to configdirs for alpha-*-netware target. * defs.h (enum language): Add language_asm. * findvar.c (read_register_bytes read_register_gen write_register_bytes read_register read_register_pid write_register write_register_pid supply_register): Move multi- thread handling down into these routines. Create XXX_pid routines that allow register references to specify the pid. * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid read_sp write_sp read_fp write_fp): Move these routines from infcmd to findvar to centralize the whole mess. * i386-nlmstub.c: Portability fixes. * infptrace.c (child_resume): Conditionalize to allow other natives to override it. Remove PIDGET gubbish, it's no longer necessary. * infrun.c (wait_for_inferior): Put registers_changed() before target_wait() to speed up remote debugging. * Replace code that reads registers from other threads with much nicer looking new function calls (see changes to findvar.c). * Don't skip prologues if debugging assembly source. * lynx-nat.c (child_resume): Lynx now needs it's own version of child_resume to handle multi-thread debugging properly. * remote.c: Add O response to get console output from target. * (readchar): Add timeout parameter. Handle SERIAL_EOF and SERIAL_ERROR here to simplify callers. * Change static var timeout to remote_timeout. * (fromhex): Remove unnecessary return -1 at end of routine. * (remote_wait): Turn this into a big switch statement. Add support for O response. * (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR. * (getpkt): Split getpkt into two parts. read_frame deals with all formatting issues, run-length encoding, and framing. getpkt now handles error recovery, and frame detection. * ser-tcp.c (tcp_readchar): Handle EINTR from read(). * ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem control. (hardwire_readchar): Handle EINTR from read(). * symfile.c (deduce_language_from_filename): Add support for .s files. * config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can override infptrace's child_wait. * config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h instead of XXXlynx.h. * config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of tm-rs6000lynx.h. * nlm/gdbserve.c: Portability fixes.
1994-06-02 16:58:48 +00:00
/* Resume execution of the inferior process.
If STEP is nonzero, single-step it.
If SIGNAL is nonzero, give it that signal. */
void
child_resume (pid, step, signal)
int pid;
int step;
enum target_signal signal;
{
int func;
* configure.in: Add nlm subdir to configdirs for alpha-*-netware target. * defs.h (enum language): Add language_asm. * findvar.c (read_register_bytes read_register_gen write_register_bytes read_register read_register_pid write_register write_register_pid supply_register): Move multi- thread handling down into these routines. Create XXX_pid routines that allow register references to specify the pid. * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid read_sp write_sp read_fp write_fp): Move these routines from infcmd to findvar to centralize the whole mess. * i386-nlmstub.c: Portability fixes. * infptrace.c (child_resume): Conditionalize to allow other natives to override it. Remove PIDGET gubbish, it's no longer necessary. * infrun.c (wait_for_inferior): Put registers_changed() before target_wait() to speed up remote debugging. * Replace code that reads registers from other threads with much nicer looking new function calls (see changes to findvar.c). * Don't skip prologues if debugging assembly source. * lynx-nat.c (child_resume): Lynx now needs it's own version of child_resume to handle multi-thread debugging properly. * remote.c: Add O response to get console output from target. * (readchar): Add timeout parameter. Handle SERIAL_EOF and SERIAL_ERROR here to simplify callers. * Change static var timeout to remote_timeout. * (fromhex): Remove unnecessary return -1 at end of routine. * (remote_wait): Turn this into a big switch statement. Add support for O response. * (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR. * (getpkt): Split getpkt into two parts. read_frame deals with all formatting issues, run-length encoding, and framing. getpkt now handles error recovery, and frame detection. * ser-tcp.c (tcp_readchar): Handle EINTR from read(). * ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem control. (hardwire_readchar): Handle EINTR from read(). * symfile.c (deduce_language_from_filename): Add support for .s files. * config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can override infptrace's child_wait. * config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h instead of XXXlynx.h. * config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of tm-rs6000lynx.h. * nlm/gdbserve.c: Portability fixes.
1994-06-02 16:58:48 +00:00
errno = 0;
/* If pid == -1, then we want to step/continue all threads, else
we only want to step/continue a single thread. */
* configure.in: Add nlm subdir to configdirs for alpha-*-netware target. * defs.h (enum language): Add language_asm. * findvar.c (read_register_bytes read_register_gen write_register_bytes read_register read_register_pid write_register write_register_pid supply_register): Move multi- thread handling down into these routines. Create XXX_pid routines that allow register references to specify the pid. * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid read_sp write_sp read_fp write_fp): Move these routines from infcmd to findvar to centralize the whole mess. * i386-nlmstub.c: Portability fixes. * infptrace.c (child_resume): Conditionalize to allow other natives to override it. Remove PIDGET gubbish, it's no longer necessary. * infrun.c (wait_for_inferior): Put registers_changed() before target_wait() to speed up remote debugging. * Replace code that reads registers from other threads with much nicer looking new function calls (see changes to findvar.c). * Don't skip prologues if debugging assembly source. * lynx-nat.c (child_resume): Lynx now needs it's own version of child_resume to handle multi-thread debugging properly. * remote.c: Add O response to get console output from target. * (readchar): Add timeout parameter. Handle SERIAL_EOF and SERIAL_ERROR here to simplify callers. * Change static var timeout to remote_timeout. * (fromhex): Remove unnecessary return -1 at end of routine. * (remote_wait): Turn this into a big switch statement. Add support for O response. * (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR. * (getpkt): Split getpkt into two parts. read_frame deals with all formatting issues, run-length encoding, and framing. getpkt now handles error recovery, and frame detection. * ser-tcp.c (tcp_readchar): Handle EINTR from read(). * ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem control. (hardwire_readchar): Handle EINTR from read(). * symfile.c (deduce_language_from_filename): Add support for .s files. * config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can override infptrace's child_wait. * config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h instead of XXXlynx.h. * config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of tm-rs6000lynx.h. * nlm/gdbserve.c: Portability fixes.
1994-06-02 16:58:48 +00:00
if (pid == -1)
{
pid = inferior_pid;
func = step ? PTRACE_SINGLESTEP : PTRACE_CONT;
}
else
func = step ? PTRACE_SINGLESTEP_ONE : PTRACE_CONT_ONE;
* configure.in: Add nlm subdir to configdirs for alpha-*-netware target. * defs.h (enum language): Add language_asm. * findvar.c (read_register_bytes read_register_gen write_register_bytes read_register read_register_pid write_register write_register_pid supply_register): Move multi- thread handling down into these routines. Create XXX_pid routines that allow register references to specify the pid. * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid read_sp write_sp read_fp write_fp): Move these routines from infcmd to findvar to centralize the whole mess. * i386-nlmstub.c: Portability fixes. * infptrace.c (child_resume): Conditionalize to allow other natives to override it. Remove PIDGET gubbish, it's no longer necessary. * infrun.c (wait_for_inferior): Put registers_changed() before target_wait() to speed up remote debugging. * Replace code that reads registers from other threads with much nicer looking new function calls (see changes to findvar.c). * Don't skip prologues if debugging assembly source. * lynx-nat.c (child_resume): Lynx now needs it's own version of child_resume to handle multi-thread debugging properly. * remote.c: Add O response to get console output from target. * (readchar): Add timeout parameter. Handle SERIAL_EOF and SERIAL_ERROR here to simplify callers. * Change static var timeout to remote_timeout. * (fromhex): Remove unnecessary return -1 at end of routine. * (remote_wait): Turn this into a big switch statement. Add support for O response. * (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR. * (getpkt): Split getpkt into two parts. read_frame deals with all formatting issues, run-length encoding, and framing. getpkt now handles error recovery, and frame detection. * ser-tcp.c (tcp_readchar): Handle EINTR from read(). * ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem control. (hardwire_readchar): Handle EINTR from read(). * symfile.c (deduce_language_from_filename): Add support for .s files. * config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can override infptrace's child_wait. * config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h instead of XXXlynx.h. * config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of tm-rs6000lynx.h. * nlm/gdbserve.c: Portability fixes.
1994-06-02 16:58:48 +00:00
/* An address of (PTRACE_ARG3_TYPE)1 tells ptrace to continue from where
it was. (If GDB wanted it to start some other way, we have already
written a new PC value to the child.)
If this system does not support PT_STEP, a higher level function will
have called single_step() to transmute the step request into a
continue request (by setting breakpoints on all possible successor
instructions), so we don't have to worry about that here. */
ptrace (func, pid, (PTRACE_ARG3_TYPE) 1, target_signal_to_host (signal));
* configure.in: Add nlm subdir to configdirs for alpha-*-netware target. * defs.h (enum language): Add language_asm. * findvar.c (read_register_bytes read_register_gen write_register_bytes read_register read_register_pid write_register write_register_pid supply_register): Move multi- thread handling down into these routines. Create XXX_pid routines that allow register references to specify the pid. * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid read_sp write_sp read_fp write_fp): Move these routines from infcmd to findvar to centralize the whole mess. * i386-nlmstub.c: Portability fixes. * infptrace.c (child_resume): Conditionalize to allow other natives to override it. Remove PIDGET gubbish, it's no longer necessary. * infrun.c (wait_for_inferior): Put registers_changed() before target_wait() to speed up remote debugging. * Replace code that reads registers from other threads with much nicer looking new function calls (see changes to findvar.c). * Don't skip prologues if debugging assembly source. * lynx-nat.c (child_resume): Lynx now needs it's own version of child_resume to handle multi-thread debugging properly. * remote.c: Add O response to get console output from target. * (readchar): Add timeout parameter. Handle SERIAL_EOF and SERIAL_ERROR here to simplify callers. * Change static var timeout to remote_timeout. * (fromhex): Remove unnecessary return -1 at end of routine. * (remote_wait): Turn this into a big switch statement. Add support for O response. * (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR. * (getpkt): Split getpkt into two parts. read_frame deals with all formatting issues, run-length encoding, and framing. getpkt now handles error recovery, and frame detection. * ser-tcp.c (tcp_readchar): Handle EINTR from read(). * ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem control. (hardwire_readchar): Handle EINTR from read(). * symfile.c (deduce_language_from_filename): Add support for .s files. * config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can override infptrace's child_wait. * config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h instead of XXXlynx.h. * config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of tm-rs6000lynx.h. * nlm/gdbserve.c: Portability fixes.
1994-06-02 16:58:48 +00:00
if (errno)
perror_with_name ("ptrace");
}
/* Convert a Lynx process ID to a string. Returns the string in a static
buffer. */
char *
lynx_pid_to_str (pid)
int pid;
{
static char buf[40];
sprintf (buf, "process %d thread %d", PIDGET (pid), TIDGET (pid));
return buf;
}
/* Extract the register values out of the core file and store
them where `read_register' will find them.
CORE_REG_SECT points to the register values themselves, read into memory.
CORE_REG_SIZE is the size of that area.
WHICH says which set of registers we are handling (0 = int, 2 = float
on machines where they are discontiguous).
REG_ADDR is the offset from u.u_ar0 to the register values relative to
core_reg_sect. This is used with old-fashioned core files to
locate the registers in a large upage-plus-stack ".reg" section.
Original upage address X is at location core_reg_sect+x+reg_addr.
*/
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
static void
fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
char *core_reg_sect;
unsigned core_reg_size;
int which;
unsigned reg_addr;
{
struct st_entry s;
unsigned int regno;
for (regno = 0; regno < NUM_REGS; regno++)
if (regmap[regno] != -1)
supply_register (regno, core_reg_sect + offsetof (st_t, ec)
+ regmap[regno]);
#ifdef SPARC
/* Fetching this register causes all of the I & L regs to be read from the
stack and validated. */
fetch_inferior_registers (I0_REGNUM);
#endif
}
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
/* Register that we are able to handle lynx core file formats.
FIXME: is this really bfd_target_unknown_flavour? */
static struct core_fns lynx_core_fns =
{
bfd_target_unknown_flavour,
fetch_core_registers,
NULL
};
void
_initialize_core_lynx ()
{
add_core_fns (&lynx_core_fns);
}