old-cross-binutils/gdb/core.c

465 lines
12 KiB
C
Raw Normal View History

1991-03-28 16:28:29 +00:00
/* Work with core dump and executable files, for GDB.
Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
1991-03-28 16:28:29 +00:00
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
1991-03-28 16:28:29 +00:00
This program is distributed in the hope that it will be useful,
1991-03-28 16:28:29 +00:00
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
1991-03-28 16:28:29 +00:00
#include <stdio.h>
#include <errno.h>
#include <signal.h>
Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>. * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
1991-09-04 07:43:50 +00:00
#include <fcntl.h>
1991-03-28 16:28:29 +00:00
#include "defs.h"
#include "param.h"
#include "frame.h" /* required by inferior.h */
#include "inferior.h"
#include "symtab.h"
#include "command.h"
#include "bfd.h"
#include "target.h"
#include "gdbcore.h"
extern int xfer_memory ();
extern void child_attach (), child_create_inferior ();
extern int sys_nerr;
extern char *sys_errlist[];
extern char *sys_siglist[];
extern char registers[];
/* Hook for `exec_file_command' command to call. */
void (*exec_file_display_hook) () = NULL;
/* Binary file diddling handle for the core file. */
bfd *core_bfd = NULL;
/* Forward decl */
extern struct target_ops core_ops;
/* Discard all vestiges of any previous core file
and mark data and stack spaces as empty. */
/* ARGSUSED */
1991-03-28 16:28:29 +00:00
void
core_close (quitting)
int quitting;
{
if (core_bfd) {
free (bfd_get_filename (core_bfd));
bfd_close (core_bfd);
core_bfd = NULL;
#ifdef CLEAR_SOLIB
CLEAR_SOLIB ();
#endif
if (core_ops.sections) {
free (core_ops.sections);
core_ops.sections = NULL;
core_ops.sections_end = NULL;
}
1991-03-28 16:28:29 +00:00
}
}
#ifdef SOLIB_ADD
/* Stub function for catch_errors around shared library hacking. */
int
solib_add_stub (from_tty)
Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>. * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
1991-09-04 07:43:50 +00:00
char *from_tty;
{
Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>. * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
1991-09-04 07:43:50 +00:00
SOLIB_ADD (NULL, (int)from_tty, &core_ops);
return 0;
}
#endif /* SOLIB_ADD */
1991-03-28 16:28:29 +00:00
/* This routine opens and sets up the core file bfd */
void
core_open (filename, from_tty)
char *filename;
int from_tty;
{
const char *p;
1991-03-28 16:28:29 +00:00
int siggy;
struct cleanup *old_chain;
char *temp;
bfd *temp_bfd;
int ontop;
Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>. * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
1991-09-04 07:43:50 +00:00
int scratch_chan;
1991-03-28 16:28:29 +00:00
target_preopen (from_tty);
1991-03-28 16:28:29 +00:00
if (!filename)
{
error (core_bfd?
"No core file specified. (Use `detach' to stop debugging a core file.)"
: "No core file specified.");
}
filename = tilde_expand (filename);
if (filename[0] != '/') {
temp = concat (current_directory, "/", filename, NULL);
1991-03-28 16:28:29 +00:00
free (filename);
filename = temp;
}
old_chain = make_cleanup (free, filename);
Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>. * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
1991-09-04 07:43:50 +00:00
scratch_chan = open (filename, write_files? O_RDWR: O_RDONLY, 0);
if (scratch_chan < 0)
perror_with_name (filename);
temp_bfd = bfd_fdopenr (filename, NULL, scratch_chan);
1991-03-28 16:28:29 +00:00
if (temp_bfd == NULL)
{
perror_with_name (filename);
}
if (!bfd_check_format (temp_bfd, bfd_core))
{
make_cleanup (bfd_close, temp_bfd); /* Do it after the err msg */
error ("\"%s\" is not a core dump: %s", filename, bfd_errmsg(bfd_error));
1991-03-28 16:28:29 +00:00
}
/* Looks semi-reasonable. Toss the old core file and work on the new. */
discard_cleanups (old_chain); /* Don't free filename any more */
unpush_target (&core_ops);
core_bfd = temp_bfd;
old_chain = make_cleanup (core_close, core_bfd);
validate_files ();
/* Find the data section */
if (build_section_table (core_bfd, &core_ops.sections,
&core_ops.sections_end))
1991-03-28 16:28:29 +00:00
error ("Can't find sections in `%s': %s", bfd_get_filename(core_bfd),
bfd_errmsg (bfd_error));
ontop = !push_target (&core_ops);
discard_cleanups (old_chain);
1991-03-28 16:28:29 +00:00
p = bfd_core_file_failing_command (core_bfd);
if (p)
printf ("Core was generated by `%s'.\n", p);
1991-03-28 16:28:29 +00:00
siggy = bfd_core_file_failing_signal (core_bfd);
if (siggy > 0)
printf ("Program terminated with signal %d, %s.\n", siggy,
siggy < NSIG ? sys_siglist[siggy] : "(undocumented)");
if (ontop) {
/* Fetch all registers from core file */
target_fetch_registers (-1);
/* Add symbols and section mappings for any shared libraries */
#ifdef SOLIB_ADD
Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>. * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
1991-09-04 07:43:50 +00:00
(void) catch_errors (solib_add_stub, (char *)from_tty, (char *)0);
#endif
/* Now, set up the frame cache, and print the top of stack */
set_current_frame (create_new_frame (read_register (FP_REGNUM),
read_pc ()));
select_frame (get_current_frame (), 0);
print_stack_frame (selected_frame, selected_frame_level, 1);
1991-03-28 16:28:29 +00:00
} else {
printf (
"Warning: you won't be able to access this core file until you terminate\n\
your %s; do ``info files''\n", current_target->to_longname);
}
}
void
core_detach (args, from_tty)
char *args;
int from_tty;
{
if (args)
error ("Too many arguments");
1991-04-05 09:02:10 +00:00
unpush_target (&core_ops);
1991-03-28 16:28:29 +00:00
if (from_tty)
printf ("No core file now.\n");
}
/* Backward compatability with old way of specifying core files. */
void
core_file_command (filename, from_tty)
char *filename;
int from_tty;
{
1991-04-05 09:02:10 +00:00
dont_repeat (); /* Either way, seems bogus. */
1991-03-28 16:28:29 +00:00
if (!filename)
core_detach (filename, from_tty);
else
core_open (filename, from_tty);
}
/* Call this to specify the hook for exec_file_command to call back.
This is called from the x-window display code. */
void
specify_exec_file_hook (hook)
void (*hook) ();
{
exec_file_display_hook = hook;
}
/* The exec file must be closed before running an inferior.
If it is needed again after the inferior dies, it must
be reopened. */
void
close_exec_file ()
{
#ifdef FIXME
if (exec_bfd)
bfd_tempclose (exec_bfd);
#endif
}
void
reopen_exec_file ()
{
#ifdef FIXME
if (exec_bfd)
bfd_reopen (exec_bfd);
#endif
}
/* If we have both a core file and an exec file,
print a warning if they don't go together. */
1991-03-28 16:28:29 +00:00
void
validate_files ()
{
if (exec_bfd && core_bfd)
{
Make writing to files work properly. (Fixes to BFD are also needed.) * core.c (core_open): Open file ourselves, read or r/w, depending on write_files. Use bfd_fdopenr. * gdbcore.h (write_files): New variable. * exec.c (write_files): Define variable, add set&show for it. (exec_file_command): Use write_files to open for read or r/write. Make shared library reading happen automatically. These changes are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>. * inferior.h (stop_soon_quietly): Add to exported variables. * infrun.c (child_create_inferior): call solib hook, if defined. (child_attach): call solib hook, if defined. * solib.c: Include inferior.h. Add from_tty to so_list as kludge. (find_solib): Use lookup_misc_func rather than hand-rolled. (symbol_add_stub): New stub for catch_errors. (solib_add): Avoid output if !from_tty. Catch errors rather than just calling symbol_file_add and bombing. (solib_create_inferior_hook): Interface with the target process to let it read and alloc shared libs, then figure out what it did. * core.c (validate_files): Fix typo, soften warning. (Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.) * utils.c (fputs_demangled): Avoid duplicate printing if demangling is off. (Fix from J.T. Conklin <jtc@cayenne.com>.) * infrun.c (proceed): Cast -1 to (CORE_ADDR) before comparing. (Fix from pierre@la.tce.com (Pierre Willard).) * main.c (catch_errors): Change argument to a char * from an int, since a char * can point to a struct full of glop, but an int is not guaranteed to be able to hold a pointer. * breakpoint.c (breakpoint_cond_eval, bpstat_stop_status, breakpoint_re_set_one, breakpoint_re_set): Adapt. * core.c (core_open, solib_add_stub): Adapt. * remote-vx.c (symbol_stub, add_symbol_stub, callers): Adapt.
1991-09-04 07:43:50 +00:00
if (!core_file_matches_executable_p (core_bfd, exec_bfd))
printf ("Warning: core file may not match specified executable file.\n");
1991-03-28 16:28:29 +00:00
else if (bfd_get_mtime(exec_bfd) > bfd_get_mtime(core_bfd))
printf ("Warning: exec file is newer than core file.\n");
}
}
/* Return the name of the executable file as a string.
ERR nonzero means get error if there is none specified;
otherwise return 0 in that case. */
char *
get_exec_file (err)
int err;
{
if (exec_bfd) return bfd_get_filename(exec_bfd);
if (!err) return NULL;
error ("No executable file specified.\n\
Use the \"file\" or \"exec-file\" command.");
return NULL;
}
static void
core_files_info (t)
struct target_ops *t;
1991-03-28 16:28:29 +00:00
{
struct section_table *p;
printf_filtered ("\t`%s', ", bfd_get_filename(core_bfd));
wrap_here (" ");
printf_filtered ("file type %s.\n", bfd_get_target(core_bfd));
1991-03-28 16:28:29 +00:00
for (p = t->sections; p < t->sections_end; p++) {
printf_filtered ("\t%s", local_hex_string_custom (p->addr, "08"));
printf_filtered (" - %s is %s",
local_hex_string_custom (p->endaddr, "08"),
bfd_section_name (p->bfd, p->sec_ptr));
if (p->bfd != core_bfd) {
printf_filtered (" in %s", bfd_get_filename (p->bfd));
}
printf_filtered ("\n");
}
1991-03-28 16:28:29 +00:00
}
void
memory_error (status, memaddr)
int status;
CORE_ADDR memaddr;
{
if (status == EIO)
{
/* Actually, address between memaddr and memaddr + len
was out of bounds. */
error ("Cannot access memory at address %s.", local_hex_string(memaddr));
1991-03-28 16:28:29 +00:00
}
else
{
if (status >= sys_nerr || status < 0)
error ("Error accessing memory address %s: unknown error (%d).",
local_hex_string(memaddr), status);
1991-03-28 16:28:29 +00:00
else
error ("Error accessing memory address %s: %s.",
local_hex_string(memaddr), sys_errlist[status]);
1991-03-28 16:28:29 +00:00
}
}
/* Same as target_read_memory, but report an error if can't read. */
void
read_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
int status;
status = target_read_memory (memaddr, myaddr, len);
if (status != 0)
memory_error (status, memaddr);
}
/* Same as target_write_memory, but report an error if can't write. */
void
write_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
int status;
status = target_write_memory (memaddr, myaddr, len);
if (status != 0)
memory_error (status, memaddr);
}
/* Read an integer from debugged memory, given address and number of bytes. */
long
read_memory_integer (memaddr, len)
CORE_ADDR memaddr;
int len;
{
char cbuf;
short sbuf;
int ibuf;
long lbuf;
if (len == sizeof (char))
{
read_memory (memaddr, &cbuf, len);
return cbuf;
}
if (len == sizeof (short))
{
read_memory (memaddr, (char *)&sbuf, len);
SWAP_TARGET_AND_HOST (&sbuf, sizeof (short));
return sbuf;
}
if (len == sizeof (int))
{
read_memory (memaddr, (char *)&ibuf, len);
SWAP_TARGET_AND_HOST (&ibuf, sizeof (int));
return ibuf;
}
if (len == sizeof (lbuf))
{
read_memory (memaddr, (char *)&lbuf, len);
SWAP_TARGET_AND_HOST (&lbuf, sizeof (lbuf));
return lbuf;
}
error ("Cannot handle integers of %d bytes.", len);
return -1; /* for lint */
}
/* Get the registers out of a core file. This is the machine-
independent part. Fetch_core_registers is the machine-dependent
part, typically implemented in the xm-file for each architecture. */
/* We just get all the registers, so we don't use regno. */
/* ARGSUSED */
static void
1991-03-28 16:28:29 +00:00
get_core_registers (regno)
int regno;
{
sec_ptr reg_sec;
unsigned size;
char *the_regs;
reg_sec = bfd_get_section_by_name (core_bfd, ".reg");
1991-10-11 00:27:41 +00:00
if (!reg_sec) goto cant;
1991-03-28 16:28:29 +00:00
size = bfd_section_size (core_bfd, reg_sec);
the_regs = alloca (size);
if (bfd_get_section_contents (core_bfd, reg_sec, the_regs, (file_ptr)0, size))
1991-03-28 16:28:29 +00:00
{
fetch_core_registers (the_regs, size, 0,
(unsigned) bfd_section_vma (abfd,reg_sec));
1991-03-28 16:28:29 +00:00
}
else
{
1991-10-11 00:27:41 +00:00
cant:
1991-03-28 16:28:29 +00:00
fprintf (stderr, "Couldn't fetch registers from core file: %s\n",
bfd_errmsg (bfd_error));
}
/* Now do it again for the float registers, if they exist. */
reg_sec = bfd_get_section_by_name (core_bfd, ".reg2");
if (reg_sec) {
size = bfd_section_size (core_bfd, reg_sec);
the_regs = alloca (size);
if (bfd_get_section_contents (core_bfd, reg_sec, the_regs, (file_ptr)0,
size))
1991-03-28 16:28:29 +00:00
{
fetch_core_registers (the_regs, size, 2,
(unsigned) bfd_section_vma (abfd,reg_sec));
1991-03-28 16:28:29 +00:00
}
else
{
fprintf (stderr, "Couldn't fetch register set 2 from core file: %s\n",
bfd_errmsg (bfd_error));
}
}
registers_fetched();
}
struct target_ops core_ops = {
"core", "Local core dump file",
"Use a core file as a target. Specify the filename of the core file.",
1991-03-28 16:28:29 +00:00
core_open, core_close,
child_attach, core_detach, 0, 0, /* resume, wait */
get_core_registers,
0, 0, 0, 0, /* store_regs, prepare_to_store, conv_to, conv_from */
xfer_memory, core_files_info,
1991-03-28 16:28:29 +00:00
0, 0, /* core_insert_breakpoint, core_remove_breakpoint, */
0, 0, 0, 0, 0, /* terminal stuff */
0, 0, 0, 0, /* kill, load, call fn, lookup sym */
1991-03-28 16:28:29 +00:00
child_create_inferior, 0, /* mourn_inferior */
core_stratum, 0, /* next */
0, 1, 1, 1, 0, /* all mem, mem, stack, regs, exec */
0, 0, /* section pointers */
1991-03-28 16:28:29 +00:00
OPS_MAGIC, /* Always the last thing */
};
void
_initialize_core()
{
add_com ("core-file", class_files, core_file_command,
"Use FILE as core dump for examining memory and registers.\n\
No arg means have no core file. This command has been superseded by the\n\
`target core' and `detach' commands.");
add_target (&core_ops);
}