* configure.in: Call AC_CONFIG_HEADER. Substitute
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
1995-09-06 22:53:43 +00:00
|
|
|
# This file is a shell script that overrides some of the tools and
|
|
|
|
# flags used on a host specific basis.
|
1992-12-21 21:17:54 +00:00
|
|
|
|
|
|
|
# Since the "bfd/hosts" directory is shared by the bfd, opcodes, and
|
|
|
|
# binutils directories (at least), the index to it is also shared.
|
|
|
|
# This is that index. Each configure.in file should source this file
|
|
|
|
# in its per-host part.
|
|
|
|
|
* configure.in: Call AC_CONFIG_HEADER. Substitute
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
1995-09-06 22:53:43 +00:00
|
|
|
# This sets the following shell variables:
|
|
|
|
# HDEFINES host specific compiler options
|
|
|
|
# host64 set to true if this is a 64 bit host
|
|
|
|
# HOST_64BIT_TYPE host 64 bit type
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
# SHLIB_CC compiler to use when building shared library
|
|
|
|
# SHLIB_CFLAGS flags to use when building shared library
|
|
|
|
# PICFLAG may be set to flag to use to compile PIC
|
|
|
|
# SHLINK may be set to the name to link the shared library to
|
|
|
|
# ALLLIBS may be set to libraries to build
|
|
|
|
# HLDFLAGS LDFLAGS specific to the host
|
1996-02-15 18:56:03 +00:00
|
|
|
# RPATH_ENVVAR environment variable used to find shared libraries
|
1996-07-18 21:19:11 +00:00
|
|
|
# INSTALL_SHLIB install a shared library
|
* configure.in: Call AC_CONFIG_HEADER. Substitute
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
1995-09-06 22:53:43 +00:00
|
|
|
|
|
|
|
HDEFINES=
|
|
|
|
host64=false
|
|
|
|
HOST_64BIT_TYPE=
|
|
|
|
|
1992-12-21 21:17:54 +00:00
|
|
|
case "${host}" in
|
|
|
|
|
* configure.in: Call AC_CONFIG_HEADER. Substitute
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
1995-09-06 22:53:43 +00:00
|
|
|
alpha-*-*) host64=true; HOST_64BIT_TYPE=long ;;
|
|
|
|
|
|
|
|
hppa*-*-hpux*) HDEFINES=-DHOST_HPPAHPUX ;;
|
|
|
|
hppa*-*-hiux*) HDEFINES=-DHOST_HPPAHPUX ;;
|
|
|
|
hppa*-*-bsd*) HDEFINES=-DHOST_HPPABSD ;;
|
|
|
|
hppa*-*-osf*) HDEFINES=-DHOST_HPPAOSF ;;
|
|
|
|
|
|
|
|
i[345]86-sequent-bsd*) HDEFINES=-Dshared=genshared ;;
|
|
|
|
i[345]86-sequent-sysv4*) ;;
|
|
|
|
i[345]86-sequent-sysv*) HDEFINES=-Dshared=genshared ;;
|
|
|
|
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
mips-dec-netbsd*) ;;
|
* configure.in: Call AC_CONFIG_HEADER. Substitute
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
1995-09-06 22:53:43 +00:00
|
|
|
mips-dec-*) HDEFINES="-G 4" ;;
|
1996-02-15 22:05:32 +00:00
|
|
|
mips-sgi-irix3*) HDEFINES="-G 4" ;;
|
|
|
|
mips-sgi-irix4*) HDEFINES="-G 4" ;;
|
* configure.in: Call AC_CONFIG_HEADER. Substitute
HOST_64BIT_LONG. Check that various header files exist. Check
that fcntl exists. Call BFD_BINARY_FOPEN. Check whether malloc
and/or free need to be declared. Don't make a link to sysdep.h.
Define TRAD_HEADER for various hosts.
* configure: Rebuild.
* configure.host: Don't set my_host. Add definitions taken from
host header files for various entries. Remove entries which now
do nothing.
* acconfig.h: New file.
* config.h.in: New file, built by autoheader.
* sysdep.h: New file.
* Makefile.in (do_distclean): Don't remove sysdep.h.
(RECONFIG): Remove.
(LOCAL_H_DEPS): New variable.
($(BFD_LIBS)): Use $(LOCAL_H_DEPS) rather than libbfd.h and
$(RECONFIG).
($(BFD_MACHINES), $(BFD_BACKENDS)): Likewise.
($(OPTIONAL_BACKENDS)): Likewise.
(stmp-bfd.h): Just substitute for BFD_HOST_64BIT_LONG, rather than
looking through sysdep.h.
* bfd-in.h (BFD_HOST_64BIT_LONG): Define; set by Makefile.
(BFD_HOST_64_BIT): Define based on BFD_HOST_64BIT_LONG.
(fprintf_vma, sprintf_vma): Likewise.
(int64_type, uint64_type): Don't define.
* bfd-in2.h: Rebuild.
* archures.c, bfd.c, srec.c: Include <ctype.h>.
* elfcore.h: Check HAVE_SYS_PROCFS_H rather than HAVE_PROCFS.
* lynx-core.c: Include stuff from old hosts/lynx.h.
* opncls.c (bfd_fdopenr): Check HAVE_FNCTL and defined (F_GETFL),
rather than NO_FCNTL.
* targets.c (bfd_target_list): Check HOST_HPPAHPUX and ! __STDC__
rather than NATIVE_HPPAHPUX_COMPILER.
* trad-core.c: Don't include <errno.h>. Include TRAD_HEADER if it
is defined.
* hosts/*.h: Remove all header files which merely include,
declare, and define things. Leave header files which define
information needed by trad-core.c.
1995-09-06 22:53:43 +00:00
|
|
|
mips-*-sysv4*) ;;
|
|
|
|
mips-*-sysv*) HDEFINES="-G 4" ;;
|
|
|
|
mips-*-riscos*) HDEFINES="-G 4" ;;
|
|
|
|
|
|
|
|
m68*-hp-hpux*) HDEFINES=-DHOST_HP300HPUX ;;
|
|
|
|
|
1992-12-21 21:17:54 +00:00
|
|
|
esac
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
|
|
|
|
# If we are configuring with --enable-shared, adjust the shared
|
|
|
|
# library support based on the host. This support must work for both
|
|
|
|
# the BFD and the opcodes libraries.
|
1996-02-15 18:56:03 +00:00
|
|
|
HLDFLAGS=
|
|
|
|
RPATH_ENVVAR=LD_LIBRARY_PATH
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
SHLIB_CC='$(CC)'
|
|
|
|
SHLIB_CFLAGS='-shared'
|
1996-07-18 21:19:11 +00:00
|
|
|
INSTALL_SHLIB='$(INSTALL_PROGRAM) $$f $(libdir)/$$tf;'
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
if [ "${shared}" = "true" ]; then
|
|
|
|
case "${host}" in
|
1996-07-18 20:33:22 +00:00
|
|
|
hppa*-*-*) picfrag=${srcdir}/../config/mh-papic ;;
|
|
|
|
i[3456]86-*-*) picfrag=${srcdir}/../config/mh-x86pic ;;
|
|
|
|
*-*-*) picfrag=${srcdir}/../config/mh-${host_cpu}pic ;;
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
esac
|
|
|
|
if [ -f "${picfrag}" ]; then
|
|
|
|
pic=`sed -n -e 's/^PICFLAG[ ]*=[ ]*\(.*\)$/\1/p' ${picfrag}`
|
|
|
|
if [ -n "${pic}" ]; then
|
|
|
|
PICFLAG=${pic}
|
|
|
|
fi
|
|
|
|
fi
|
|
|
|
|
|
|
|
case "${host}" in
|
|
|
|
*-dec-osf*)
|
|
|
|
# -fpic is not needed on the Alpha.
|
|
|
|
PICFLAG=
|
1996-04-08 16:22:17 +00:00
|
|
|
HLDFLAGS='-rpath $(libdir)'
|
|
|
|
SHLIB_CFLAGS='-shared -Wl,-soname,$(SONAME)'
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
;;
|
|
|
|
*-*-hpux*)
|
|
|
|
# HP/UX uses .sl for shared libraries.
|
|
|
|
SHLINK=`echo ${SHLINK} | sed -e 's/so$/sl/'`
|
1996-02-06 17:34:18 +00:00
|
|
|
SHLIB_CFLAGS='-shared $(PICFLAG)'
|
1996-02-15 18:56:03 +00:00
|
|
|
HLDFLAGS='-Wl,+s,+b,$(libdir)'
|
|
|
|
RPATH_ENVVAR=SHLIB_PATH
|
1996-07-18 21:19:11 +00:00
|
|
|
INSTALL_SHLIB='$(INSTALL_PROGRAM) $$f $(libdir)/$$tf; chmod -w $(libdir)/$$tf;'
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
;;
|
1996-07-18 20:33:22 +00:00
|
|
|
*-*-irix[56]*)
|
|
|
|
# -fpic is not needed on Irix 5 or 6.
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
PICFLAG=
|
1996-02-15 18:56:03 +00:00
|
|
|
SHLIB_CFLAGS='-shared -Wl,-soname,$(SONAME)'
|
|
|
|
HLDFLAGS='-Wl,-rpath,$(libdir)'
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
;;
|
|
|
|
*-*-linux*aout*)
|
|
|
|
;;
|
|
|
|
*-*-linux*)
|
1996-02-15 18:56:03 +00:00
|
|
|
SHLIB_CFLAGS='-shared -Wl,-soname,$(SONAME)'
|
1996-04-09 16:01:26 +00:00
|
|
|
case "${libdir}" in
|
1996-04-08 16:22:17 +00:00
|
|
|
/lib | /usr/lib) ;;
|
|
|
|
*) HLDFLAGS='-Wl,-rpath,$(libdir)' ;;
|
|
|
|
esac
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
;;
|
|
|
|
*-*-sysv4* | *-*-solaris*)
|
1996-02-15 18:56:03 +00:00
|
|
|
SHLIB_CFLAGS='-shared -h $(SONAME)'
|
|
|
|
HLDFLAGS='-R $(libdir)'
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
;;
|
|
|
|
*-*-sunos*)
|
1996-02-15 18:56:03 +00:00
|
|
|
# Build a libTARGET-bfd.so.VERSION symlink in the object directory.
|
|
|
|
ALLLIBS=`echo ${ALLLIBS} | sed -e 's/\$(SHLINK)/stamp-tshlink/'`
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
;;
|
|
|
|
esac
|
|
|
|
fi
|
|
|
|
|
|
|
|
# On SunOS, if the linker supports the -rpath option, use it to
|
|
|
|
# prevent ../bfd and ../opcodes from being included in the run time
|
|
|
|
# search path.
|
|
|
|
case "${host}" in
|
|
|
|
*-*-sunos*)
|
|
|
|
echo 'main () { }' > conftest.c
|
1996-02-15 22:05:32 +00:00
|
|
|
${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
|
|
|
|
:
|
|
|
|
elif grep 'No such file' conftest.t >/dev/null 2>&1; then
|
|
|
|
:
|
1996-02-18 20:06:40 +00:00
|
|
|
elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
|
|
|
|
:
|
1996-02-15 18:56:03 +00:00
|
|
|
elif [ "${shared}" = "true" ]; then
|
|
|
|
HLDFLAGS='-Wl,-rpath=$(libdir)'
|
Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
SHLIB_CFLAGS, COMMON_SHLIB, PICLIST, SHLINK.
* configure: Rebuild.
* configure.host: If --enable-shared, adjust shared library stuff
based on the host. If the host is SunOS, and the linker supports
-rpath, set HLDFLAGS to use it.
* Makefile.in (ALLLIBS): New variable.
(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
(COMMON_SHLIB, SHLINK): New variables.
(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
(STAGESTUFF): Remove variable.
(all): Depend upon $(ALLLIBS) and @PICLIST@ rather than
$(TARGETLIB).
(stamp-ofiles): New target, like old ofiles target, but build
using a temporary file and move-if-change, and touch stamp-ofiles
when done.
(ofiles): Just depend upon stamp-ofiles.
(stamp-piclist, piclist): New targets.
($(SHLIB), $(SHLINK)): New targets.
(targets.o, archures.o): Build twice if PICFLAG is set.
(do_mostlyclean): Remove pic/*.o.
(do_clean): Remove stamp-ofiles, $(SHLIB), $(SHLINK), piclist, and
stamp-piclist.
(do_distclean): Remove pic and stamp-picdir.
(install): Install shared libraries.
($(OFILES)): Depend upon stamp-picdir.
(stamp-picdir): New target.
1996-02-05 21:14:14 +00:00
|
|
|
else
|
|
|
|
HLDFLAGS='-Wl,-rpath='
|
|
|
|
fi
|
|
|
|
rm -f conftest.t conftest.c conftest
|
|
|
|
;;
|
|
|
|
esac
|