old-cross-binutils/gas/Makefile.old

435 lines
14 KiB
Makefile
Raw Normal View History

1991-04-04 18:19:56 +00:00
# Makefile for GAS.
# Copyright (C) 1989, Free Software Foundation
#
# This file is part of GAS, the GNU Assembler.
#
# GAS is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 1, or (at your option)
# any later version.
#
# GAS is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GAS; see the file COPYING. If not, write to
# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
# This makefile may be used to make the VAX, 68020, 80386,
# SPARC, AMD 29000, ns32k, or i860 assembler(s).
ALL = asm29k avax a68 a386 asparc a32k a860 a960
MDSRC=vax.c m68k.c i386.c sparc.c am29k.c ns32k.c
BINDIR = $(DESTDIR)/bin
# If you are on a BSD system, un-comment the next two lines, and comment out
# the lines for SystemV and HPUX below
#G0 = -g -I. #-O -Wall
#LDFLAGS = $(CFLAGS)
#
# To compile gas on a System Five machine, comment out the two lines above
# and un-comment out the next three lines
# Comment out the -lPW on the LOADLIBES line if you are using GCC.
G0 = -g -I. -DUSG
LDFLAGS = $(CFLAGS)
LOADLIBES = # -lmalloc -lPW
#
# To compile gas for HPUX, link m-hpux.h to m68k.h , and un-comment the
# next two lines. (If you are using GCC, comment out the alloca.o part)
# (Get alloca from the emacs distribution, or use GCC.)
# HPUX 7.0 may have a bug in setvbuf. gas gives an error message like
# 1:"Unknown operator" -- Statement 'NO_APP' ignored
# if setvbuf is broken. Re-compile input-file.c (and only input-file.c
# with -DVMS and the problem should go away.
#
# G0 = -g -I. -DUSG
# LOADLIBES = alloca.o
#
# To compile gas for a Sequent Symmetry, comment out all the above lines,
# and un-comment the next two lines.
# G0 = -g -I. -DUSE_SYSTEM_HDR -DEXEC_VERSION=1
# LOADLIBES = -lc /usr/att/lib/libc.a
# Use these lines to build gas using hc.
#CC=hc29 -cmdlink.cmd -Dconst= -I../include/msdos
#CC=gcc29k
#LOADLIBES= ../binutils/alloca.o
# If you just want to compile the vax assembler, type 'make avax'
# If you just want to compile the i386 assembler, type 'make a386'
# If you just want to compile the ns32k assembler, type 'make a32k'
# If you just want to compile the sparc assembler, type 'make asparc'
# If you just want to compile the AMD 29000 assembler, type 'make asm29k'
# If you just want to compile the a860 assembler, type 'make a860'
# If you just want to compile the a960 assembler, type 'make a960'
# If you just want to compile the mc68020 assembler, make sure m68k.h
# is correctly set up, and type type 'make a68' (Except on HPUX machines,
# where you will have to make the changes marked below before typing
# 'make a68'
# m68k.h should be a symbolic or hard-link to one of
# m-sun3.h , m-hpux.h or m-generic.h
# depending on which machine you want to compile the 68020 assembler for.
#
# If you want the 68k assembler to be completely compatable with the the
# SUN one, un-comment the -DLOCAL_LABELS_FB and -DLOCAL_LABELS_DOLLAR
# lines below.
#
# Gas prefers STDARG's, but if your machine doesn't have stdarg.h, you
# should define remove the # from the -DNO_STDARG line below. In this
# case gas will try to use VARARGS instead. (but keep reading).
#
# If your machine does not have vfprintf, but does have _doprnt(),
# remove the # from the -DNO_VARARGS line below.
#
# If the return-type of a signal-hander is void (instead of int),
# remove the # from the -DSIGTY line below.
#
# To include the mc68851 mmu coprocessor instructions in the 68020 assembler,
# remove the # from the -Dm68851 line below.
#
# If you want the 68020 assembler use a register prefix character, un-comment
# the REGISTER_PREFIX line, and (maybe) change the '%' to the appropriate
# character.
#
# If you want the assembler to treat .L* or ..* symbols as local, instead of
# the usual L* symbols, un-comment the DOT_LABEL_PREFIX line.
#
# If you want the 80386 assembler to correctly handle fsub/fsubr and fdiv/fdivr
# opcodes (unlike most 80386 assemblers), remove the # from
# the -DNON_BROKEN_WORDS line below.
#
# To compile 80386 Gas for the Sequent Symmetry, un-comment the -DEXEC_VERSION
# and the -DUSE_SYSTEM_HDR lines below.
#
# To compile gas for the HP 9000/300 un-comment the -DUSE_HP_HDR line below.
#
# For the ns32k, the options are 32532 or 32032 CPU and 32381 or 32081 FPU.
# To select the NS32532, remove the # from the -DNS32532 line below.
# To compile in tne NS32381 opcodes in addition to the NS32081 opcodes
# (the 32381 is a superset of the 32081), remove the # from the -DNS32381
# line below.
#
# For the ns32k on a Sequent, uncomment the SEQUENT_COMPATABILITY line below.
#
# If you want character constants to *require* closing single quotes,
# eg 'c' rather than 'c then use the -DREQUIRE_CHAR_CLOSE_QUOTE lines
# below. The default is for the closing quote to be optional.
#
# To produce intel's b.out format, use the B_OUT line below.
#
# if you want to allow "\v" to mean a control-k, use the BACKSLASH_V
# line below.
# [Why is there a distinction between "Ox" and "Gx"? It would seem easier
# to not have to figure out that your code isn't working because some
# define's are only seen by some modules and you tested it in a module
# where it never gets defined... gnu@cygnus.com]
O1 = -DNO_STDARG
O2 = # -DNO_VARARGS
O3 = # -DNON_BROKEN_WORDS
O4 = # -Dm68851
O5 = # -DEXEC_VERSION=1
O6 = # -DSIGTY=void
O6 = # -DNS32532
O7 = # -DNS32381
O8 = # -DDOT_LABEL_PREFIX
O9 = # -DSEQUENT_COMPATABILITY
G1 = # -DREGISTER_PREFIX=\'%\'
G2 = # -DUSE_SYSTEM_HDR
G3 = # -DUSE_HP_HDR
G4 = # -DLOCAL_LABELS_DOLLAR
G5 = # -DLOCAL_LABELS_FB
G6 = # -DDEBUG
G7 = # -DREQUIRE_CHAR_CLOSE_QUOTE
G8 = -DB_OUT
G9 = -DBACKSLASH_V
OPTIONS = $(O1) $(O2) $(O3) $(O4) $(O5) $(O6) $(O7) $(O8) $(O9)
CFLAGS = $(G0) $(G1) $(G2) $(G3) $(G4) $(G5) $(G6) $(G7) $(G8) $(G9) $(OPTIONS)
#
# To make the 68020 assembler compile as the default, un-comment the next
# line, and comment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=a68
#
# To make the VAX assembler compile as the default, un-comment the next
# line and commment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=avax
#
# To make the 80386 assembler compile as the default, un-comment the next
# line and commment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=a386
#
# To make the ns32k assembler compile as the default, un-comment the next
# line and commment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=a32k
#
# To make the sparc assembler compile as the default, un-comment the next
# line and commment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=asparc
#
#
# To make the i860 assembler compile as the default, un-comment the next
# line and comment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=a860
#
# To make the asm29k assembler compile as the default, un-comment the next
# line and commment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=asm29k
#
# To make the i960 assembler compile as the default, un-comment the next
# line and commment out all the other lines that start with DEFAULT_GAS
#DEFAULT_GAS=a960
# Global Sources -------------------------------------------------------------
a =\
as.o xrealloc.o xmalloc.o hash.o hex-value.o \
atof-generic.o messages.o expr.o app.o \
frags.o input-file.o input-scrub.o output-file.o \
subsegs.o symbols.o version.o \
flonum-const.o flonum-copy.o flonum-mult.o strstr.o bignum-copy.o \
obstack.o cond.o
#gdb.o gdb-file.o gdb-symbols.o gdb-blocks.o gdb-lines.o
a: $(DEFAULT_GAS)
@rm -f a
@ln $(DEFAULT_GAS) a
# i960 GAS ------------------------------------------------------------------
t = i960.o i960-opcode.o atof-ieee.o ver960.o read-i960.o write-i960.o
T = i960.c i960-opcode.c atof-ieee.c ver960.c
i960.o: i960.c i960-opcode.h as.h frags.h struc-symbol.h
i960.o: flonum.h expr.h hash.h md.h write.h read.h symbols.h
$(CC) -c $(CFLAGS) -DI80960 i960.c
write-i960.o: write.c
$(CC) -c $(CFLAGS) write.c
mv write.o write-i960.o
read-i960.o: read.c
$(CC) -c $(CFLAGS) read.c
mv read.o read-i960.o
a960_cheat: $a $t
$(CC) -o a960 $(LDFLAGS) $a $t $(LOADLIBES)
a960: force
$(MAKE) 'CFLAGS=$(CFLAGS) -DI80960' a960_cheat
force:
# AM29K GAS ------------------------------------------------------------------
u = am29k.o atof-ieee.o write.o read.o
U = am29k.c am29k-opcode.h
am29k.o: am29k.c a.out.gnu.h as.h expr.h flonum.h frags.h hash.h
am29k.o: am29k-opcode.h md.h obstack.h struc-symbol.h
$(CC) $(CFLAGS) -c am29k.c
asm29k: $a $u
$(CC) -o asm29k $(LDFLAGS) $a $u $(LOADLIBES)
# I860 GAS ------------------------------------------------------------------
u = i860.o atof-ieee.o write.o read.o
U = i860.c i860-opcode.h
i860.o: i860.c i860-opcode.h as.h frags.h struc-symbol.h
i860.o: flonum.h expr.h hash.h md.h write.h read.h symbols.h
$(CC) -c $(CFLAGS) i860.c
atof-ieee.o: flonum.h
a860: $a $u
$(CC) -o a860 $(LDFLAGS) $a $u $(LOADLIBES)
# SPARC GAS ------------------------------------------------------------------
v = sparc.o atof-ieee.o write.o read.o
V = sparc.c sparc-opcode.h
atof-ieee.o: flonum.h
sparc.o: sparc.c reloc.h sparc-opcode.h as.h frags.h struc-symbol.h
sparc.o: flonum.h expr.h hash.h md.h write.h read.h symbols.h
$(CC) -c $(CFLAGS) -DSPARC sparc.c
asparc: $a $v
$(CC) -o asparc $(LDFLAGS) $a $v $(LOADLIBES)
# NS32K GAS ------------------------------------------------------------------
w = ns32k.o atof-ieee.o write-ns32k.o read-ns32k.o
W = ns32k.c ns32k-opcode.h
atof-ieee.o: flonum.h
ns32k.o: as.h frags.h struc-symbol.h flonum.h expr.h md.h hash.h
ns32k.o: write.h symbols.h ns32k-opcode.h ns32k.c
$(CC) $(CFLAGS) $(OPTIONS) -c ns32k.c
write-ns32k.o: write.c
rm -f write-ns32k.c
cp write.c write-ns32k.c
$(CC) -c -DNS32K $(CFLAGS) write-ns32k.c
rm -f write-ns32k.c
read-ns32k.o: read.c
rm -f read-ns32k.c
cp read.c read-ns32k.c
$(CC) -c -DNS32K $(CFLAGS) read-ns32k.c
rm -f read-ns32k.c
a32k: $a $w
$(CC) -o a32k $(LDFLAGS) $a $w $(LOADLIBES)
# 80386 GAS ------------------------------------------------------------------
x = i386.o atof-ieee.o write.o read.o
X = i386.c i386.h i386-opcode.h
i386.o: i386.c as.h read.h flonum.h frags.h struc-symbol.h expr.h
i386.o: symbols.h hash.h md.h i386.h i386-opcode.h
$(CC) $(CFLAGS) $(OPTIONS) -c i386.c
atof-ieee.o: flonum.h
a386: $a $x
$(CC) -o a386 $(LDFLAGS) $a $x $(LOADLIBES)
# 68020 GAS ------------------------------------------------------------------
y = m68k.o atof-ieee.o write.o read.o
Y = m68k.c atof-ieee.c m68k-opcode.h m-hpux.h m-sun3.h m-generic.h
atof-ieee.o: flonum.h
m68k.o: m68k.c a.out.gnu.h as.h expr.h flonum.h frags.h hash.h
m68k.o: m68k-opcode.h m68k.h md.h obstack.h struc-symbol.h
$(CC) $(CFLAGS) $(OPTIONS) -c m68k.c
a68: $a $y
$(CC) -o a68 $(LDFLAGS) $a $y $(LOADLIBES)
# VAX GAS --------------------------------------------------------------------
z = vax.o atof-vax.o write.o read.o
Z = vax.c atof-vax.c vax-opcode.h vax-inst.h \
make-gas.com objrecdef.h vms.c vms-dbg.c README-vms-dbg
vax.o: vax.c a.out.gnu.h as.h expr.h flonum.h frags.h md.h obstack.h
vax.o: read.h struc-symbol.h symbols.h vax-inst.h vax-opcode.h
atof-vax.o: as.h flonum.h read.h
avax: $a $z
$(CC) -o avax $(LDFLAGS) $a $z $(LOADLIBES)
# global files ---------------------------------------------------------------
hash.o: hash.c
$(CC) $(CFLAGS) -Derror=as_fatal -c hash.c
xmalloc.o: xmalloc.c
$(CC) $(CFLAGS) -Derror=as_fatal -c xmalloc.c
xrealloc.o: xrealloc.c
$(CC) $(CFLAGS) -Derror=as_fatal -c xrealloc.c
A =\
as.c xrealloc.c xmalloc.c hash.c hex-value.c \
atof-generic.c messages.c expr.c bignum-copy.c \
frags.c input-file.c input-scrub.c output-file.c read.c \
subsegs.c symbols.c write.c strstr.c \
flonum-const.c flonum-copy.c flonum-mult.c app.c version.c \
obstack.c cond.c \
#gdb.c gdb-file.c gdb-symbols.c gdb-blocks.c \
#gdb-lines.c
H = \
a.out.gnu.h as.h bignum.h expr.h flonum.h \
frags.h hash.h input-file.h md.h \
obstack.h read.h reloc.h struc-symbol.h subsegs.h \
symbols.h write.h
dist: COPYING README ChangeLog $A $H $U $V $W $X $Y $Z Makefile
echo gas-`sed -n -e '/ version /s/[^0-9.]*\([0-9.]*\).*/\1/p' < version.c` > .fname
mkdir `cat .fname`
ln COPYING README ChangeLog $A $H $U $V $W $X $Y $Z Makefile `cat .fname`
tar cvhZf `cat .fname`.tar.Z `cat .fname`
-rm -rf .fname `cat .fname`
clean:
rm -f a avax a68 a386 a32k asparc asm29k a860 a960 $a $u $v $w $x $y $z a core gmon.out bugs a.out
all: $(ALL)
install: install_tools
install_tools: a
cp a $(BINDIR)/as
# For things like: emacs `make mdsrc`
mdsrc:
@ls $(MDSRC)
LINT = /usr/5bin/lint
LINTFLAGS =
lint:
$(LINT) $(LINTFLAGS) $(CFLAGS) $A
# General .o-->.h dependencies
app.o: as.h
as.o: a.out.gnu.h as.h read.h struc-symbol.h write.h
atof-generic.o: flonum.h
bignum-copy.o: bignum.h
expr.o: a.out.gnu.h as.h expr.h flonum.h obstack.h read.h struc-symbol.h
expr.o: symbols.h
flonum-const.o: flonum.h
flonum-copy.o: flonum.h
flonum-mult.o: flonum.h
flonum-normal.o:flonum.h
flonum-print.o: flonum.h
frags.o: a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h
#gdb.o: as.h
#gdb-blocks.o: as.h
#gdb-lines.o: as.h frags.h obstack.h
#gdb-symbols.o: a.out.gnu.h as.h struc-symbol.h
hash.o: hash.h
input-file.o: input-file.h
input-scrub.o: as.h input-file.h read.h
messages.o: as.h
obstack.o: obstack.h
read.o: a.out.gnu.h as.h expr.h flonum.h frags.h hash.h md.h obstack.h
read.o: read.h struc-symbol.h symbols.h reloc.h
subsegs.o: a.out.gnu.h as.h frags.h obstack.h struc-symbol.h subsegs.h write.h
symbols.o: a.out.gnu.h as.h frags.h hash.h obstack.h struc-symbol.h symbols.h
write.o: a.out.gnu.h as.h md.h obstack.h struc-symbol.h subsegs.h
write.o: symbols.h write.h reloc.h
flonum.h: bignum.h
etags tags: TAGS
TAGS: force
etags Makefile* README* config.gas *.[hc]
force:
# End of Makefile