old-cross-binutils/gdb/tui/tui-interp.c

327 lines
7.3 KiB
C
Raw Normal View History

/* TUI Interpreter definitions for GDB, the GNU debugger.
Copyright (C) 2003-2016 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 00:11:48 +00:00
#include "cli/cli-interp.h"
#include "interps.h"
#include "top.h"
#include "event-top.h"
#include "event-loop.h"
#include "ui-out.h"
#include "cli-out.h"
#include "tui/tui-data.h"
#include "readline/readline.h"
#include "tui/tui-win.h"
#include "tui/tui.h"
#include "tui/tui-io.h"
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
#include "infrun.h"
#include "observer.h"
#include "gdbthread.h"
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
static struct ui_out *tui_ui_out (struct interp *self);
/* Set to 1 when the TUI mode must be activated when we first start
gdb. */
static int tui_start_enabled = 0;
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
/* Returns the INTERP if the INTERP is a TUI, and returns NULL
otherwise. */
static struct interp *
as_tui_interp (struct interp *interp)
{
if (strcmp (interp_name (interp), INTERP_TUI) == 0)
return interp;
return NULL;
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
/* Cleanup the tui before exiting. */
static void
tui_exit (void)
{
/* Disable the tui. Curses mode is left leaving the screen in a
clean state (see endwin()). */
tui_disable ();
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
/* Observers for several run control events. If the interpreter is
quiet (i.e., another interpreter is being run with
interpreter-exec), print nothing. */
Replace "struct continuation" mechanism by something more extensible This adds an object oriented replacement for the "struct continuation" mechanism, and converts the stepping commands (step, next, stepi, nexti) and the "finish" commands to use it. It adds a new thread "class" (struct thread_fsm) that contains the necessary info and callbacks to manage the state machine of a thread's execution command. This allows getting rid of some hacks. E.g., in fetch_inferior_event and normal_stop we no longer need to know whether a thread is doing a multi-step (e.g., step N). This effectively makes the intermediate_continuations unused -- they'll be garbage collected in a separate patch. (They were never a proper abstraction, IMO. See how fetch_inferior_event needs to check step_multi before knowing whether to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.) The target async vs !async uiout hacks in mi_on_normal_stop go away too. print_stop_event is no longer called from normal_stop. Instead it is now called from within each interpreter's normal_stop observer. This clears the path to make each interpreter print a stop event the way it sees fit. Currently we have some hacks in common code to differenciate CLI vs TUI vs MI around this area. The "finish" command's FSM class stores the return value plus that value's position in the value history, so that those can be printed to both MI and CLI's streams. This fixes the CLI "finish" command when run from MI -- it now also includes the function's return value in the CLI stream: (gdb) ~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" +~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" -FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output +PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add thread-fsm.o. * breakpoint.c (handle_jit_event): Print debug output. (bpstat_what): Split event callback handling to ... (bpstat_run_callbacks): ... this new function. (momentary_bkpt_print_it): No longer handle bp_finish here. * breakpoint.h (bpstat_run_callbacks): Declare. * gdbthread.h (struct thread_info) <step_multi>: Delete field. <thread_fsm>: New field. (thread_cancel_execution_command): Declare. * infcmd.c: Include thread-fsm.h. (struct step_command_fsm): New. (step_command_fsm_ops): New global. (new_step_command_fsm, step_command_fsm_prepare): New functions. (step_1): Adjust to use step_command_fsm_prepare and prepare_one_step. (struct step_1_continuation_args): Delete. (step_1_continuation): Delete. (step_command_fsm_should_stop): New function. (step_once): Delete. (step_command_fsm_clean_up, step_command_fsm_async_reply_reason) (prepare_one_step): New function, based on step_once. (until_next_command): Remove step_multi reference. (struct return_value_info): New. (print_return_value): Rename to ... (print_return_value_1): ... this. New struct return_value_info parameter. Adjust. (print_return_value): Reimplement as wrapper around print_return_value_1. (struct finish_command_fsm): New. (finish_command_continuation): Delete. (finish_command_fsm_ops): New global. (new_finish_command_fsm, finish_command_fsm_should_stop): New functions. (finish_command_fsm_clean_up, finish_command_fsm_return_value): New. (finish_command_continuation_free_arg): Delete. (finish_command_fsm_async_reply_reason): New. (finish_backward, finish_forward): Change symbol parameter to a finish_command_fsm. Adjust. (finish_command): Create a finish_command_fsm. Adjust. * infrun.c: Include "thread-fsm.h". (clear_proceed_status_thread): Delete the thread's FSM. (infrun_thread_stop_requested_callback): Cancel the thread's execution command. (clean_up_just_stopped_threads_fsms): New function. (fetch_inferior_event): Handle the event_thread's should_stop method saying the command isn't done yet. (process_event_stop_test): Run breakpoint callbacks here. (print_stop_event): Rename to ... (print_stop_location): ... this. (restore_current_uiout_cleanup): New function. (print_stop_event): Reimplement. (normal_stop): No longer notify the end_stepping_range observers here handle "step N" nor "finish" here. No longer call print_stop_event here. * infrun.h (struct return_value_info): Forward declare. (print_return_value): Declare. (print_stop_event): Change prototype. * thread-fsm.c: New file. * thread-fsm.h: New file. * thread.c: Include "thread-fsm.h". (thread_cancel_execution_command): New function. (clear_thread_inferior_resources): Call it. * cli/cli-interp.c (cli_on_normal_stop): New function. (cli_interpreter_init): Install cli_on_normal_stop as normal_stop observer. * mi/mi-interp.c: Include "thread-fsm.h". (restore_current_uiout_cleanup): Delete. (mi_on_normal_stop): If the thread has an FSM associated, and it finished, ask it for the async-reply-reason to print. Always call print_stop_event here, regardless of the top-level interpreter. Check bpstat_what to tell whether an asynchronous breakpoint hit triggered. * tui/tui-interp.c (tui_on_normal_stop): New function. (tui_init): Install tui_on_normal_stop as normal_stop observer. gdb/testsuite/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * gdb.mi/mi-cli.exp: Add CLI finish tests.
2015-09-09 17:23:24 +00:00
/* Observer for the normal_stop notification. */
static void
tui_on_normal_stop (struct bpstats *bs, int print_frame)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct switch_thru_all_uis state;
if (!print_frame)
return;
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
SWITCH_THRU_ALL_UIS (state)
Replace "struct continuation" mechanism by something more extensible This adds an object oriented replacement for the "struct continuation" mechanism, and converts the stepping commands (step, next, stepi, nexti) and the "finish" commands to use it. It adds a new thread "class" (struct thread_fsm) that contains the necessary info and callbacks to manage the state machine of a thread's execution command. This allows getting rid of some hacks. E.g., in fetch_inferior_event and normal_stop we no longer need to know whether a thread is doing a multi-step (e.g., step N). This effectively makes the intermediate_continuations unused -- they'll be garbage collected in a separate patch. (They were never a proper abstraction, IMO. See how fetch_inferior_event needs to check step_multi before knowing whether to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.) The target async vs !async uiout hacks in mi_on_normal_stop go away too. print_stop_event is no longer called from normal_stop. Instead it is now called from within each interpreter's normal_stop observer. This clears the path to make each interpreter print a stop event the way it sees fit. Currently we have some hacks in common code to differenciate CLI vs TUI vs MI around this area. The "finish" command's FSM class stores the return value plus that value's position in the value history, so that those can be printed to both MI and CLI's streams. This fixes the CLI "finish" command when run from MI -- it now also includes the function's return value in the CLI stream: (gdb) ~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" +~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" -FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output +PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add thread-fsm.o. * breakpoint.c (handle_jit_event): Print debug output. (bpstat_what): Split event callback handling to ... (bpstat_run_callbacks): ... this new function. (momentary_bkpt_print_it): No longer handle bp_finish here. * breakpoint.h (bpstat_run_callbacks): Declare. * gdbthread.h (struct thread_info) <step_multi>: Delete field. <thread_fsm>: New field. (thread_cancel_execution_command): Declare. * infcmd.c: Include thread-fsm.h. (struct step_command_fsm): New. (step_command_fsm_ops): New global. (new_step_command_fsm, step_command_fsm_prepare): New functions. (step_1): Adjust to use step_command_fsm_prepare and prepare_one_step. (struct step_1_continuation_args): Delete. (step_1_continuation): Delete. (step_command_fsm_should_stop): New function. (step_once): Delete. (step_command_fsm_clean_up, step_command_fsm_async_reply_reason) (prepare_one_step): New function, based on step_once. (until_next_command): Remove step_multi reference. (struct return_value_info): New. (print_return_value): Rename to ... (print_return_value_1): ... this. New struct return_value_info parameter. Adjust. (print_return_value): Reimplement as wrapper around print_return_value_1. (struct finish_command_fsm): New. (finish_command_continuation): Delete. (finish_command_fsm_ops): New global. (new_finish_command_fsm, finish_command_fsm_should_stop): New functions. (finish_command_fsm_clean_up, finish_command_fsm_return_value): New. (finish_command_continuation_free_arg): Delete. (finish_command_fsm_async_reply_reason): New. (finish_backward, finish_forward): Change symbol parameter to a finish_command_fsm. Adjust. (finish_command): Create a finish_command_fsm. Adjust. * infrun.c: Include "thread-fsm.h". (clear_proceed_status_thread): Delete the thread's FSM. (infrun_thread_stop_requested_callback): Cancel the thread's execution command. (clean_up_just_stopped_threads_fsms): New function. (fetch_inferior_event): Handle the event_thread's should_stop method saying the command isn't done yet. (process_event_stop_test): Run breakpoint callbacks here. (print_stop_event): Rename to ... (print_stop_location): ... this. (restore_current_uiout_cleanup): New function. (print_stop_event): Reimplement. (normal_stop): No longer notify the end_stepping_range observers here handle "step N" nor "finish" here. No longer call print_stop_event here. * infrun.h (struct return_value_info): Forward declare. (print_return_value): Declare. (print_stop_event): Change prototype. * thread-fsm.c: New file. * thread-fsm.h: New file. * thread.c: Include "thread-fsm.h". (thread_cancel_execution_command): New function. (clear_thread_inferior_resources): Call it. * cli/cli-interp.c (cli_on_normal_stop): New function. (cli_interpreter_init): Install cli_on_normal_stop as normal_stop observer. * mi/mi-interp.c: Include "thread-fsm.h". (restore_current_uiout_cleanup): Delete. (mi_on_normal_stop): If the thread has an FSM associated, and it finished, ask it for the async-reply-reason to print. Always call print_stop_event here, regardless of the top-level interpreter. Check bpstat_what to tell whether an asynchronous breakpoint hit triggered. * tui/tui-interp.c (tui_on_normal_stop): New function. (tui_init): Install tui_on_normal_stop as normal_stop observer. gdb/testsuite/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * gdb.mi/mi-cli.exp: Add CLI finish tests.
2015-09-09 17:23:24 +00:00
{
struct interp *interp = top_level_interpreter ();
struct interp *tui = as_tui_interp (interp);
struct thread_info *thread;
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
if (tui == NULL)
continue;
thread = inferior_thread ();
if (should_print_stop_to_console (interp, thread))
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
print_stop_event (tui_ui_out (tui));
Replace "struct continuation" mechanism by something more extensible This adds an object oriented replacement for the "struct continuation" mechanism, and converts the stepping commands (step, next, stepi, nexti) and the "finish" commands to use it. It adds a new thread "class" (struct thread_fsm) that contains the necessary info and callbacks to manage the state machine of a thread's execution command. This allows getting rid of some hacks. E.g., in fetch_inferior_event and normal_stop we no longer need to know whether a thread is doing a multi-step (e.g., step N). This effectively makes the intermediate_continuations unused -- they'll be garbage collected in a separate patch. (They were never a proper abstraction, IMO. See how fetch_inferior_event needs to check step_multi before knowing whether to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.) The target async vs !async uiout hacks in mi_on_normal_stop go away too. print_stop_event is no longer called from normal_stop. Instead it is now called from within each interpreter's normal_stop observer. This clears the path to make each interpreter print a stop event the way it sees fit. Currently we have some hacks in common code to differenciate CLI vs TUI vs MI around this area. The "finish" command's FSM class stores the return value plus that value's position in the value history, so that those can be printed to both MI and CLI's streams. This fixes the CLI "finish" command when run from MI -- it now also includes the function's return value in the CLI stream: (gdb) ~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" +~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" -FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output +PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add thread-fsm.o. * breakpoint.c (handle_jit_event): Print debug output. (bpstat_what): Split event callback handling to ... (bpstat_run_callbacks): ... this new function. (momentary_bkpt_print_it): No longer handle bp_finish here. * breakpoint.h (bpstat_run_callbacks): Declare. * gdbthread.h (struct thread_info) <step_multi>: Delete field. <thread_fsm>: New field. (thread_cancel_execution_command): Declare. * infcmd.c: Include thread-fsm.h. (struct step_command_fsm): New. (step_command_fsm_ops): New global. (new_step_command_fsm, step_command_fsm_prepare): New functions. (step_1): Adjust to use step_command_fsm_prepare and prepare_one_step. (struct step_1_continuation_args): Delete. (step_1_continuation): Delete. (step_command_fsm_should_stop): New function. (step_once): Delete. (step_command_fsm_clean_up, step_command_fsm_async_reply_reason) (prepare_one_step): New function, based on step_once. (until_next_command): Remove step_multi reference. (struct return_value_info): New. (print_return_value): Rename to ... (print_return_value_1): ... this. New struct return_value_info parameter. Adjust. (print_return_value): Reimplement as wrapper around print_return_value_1. (struct finish_command_fsm): New. (finish_command_continuation): Delete. (finish_command_fsm_ops): New global. (new_finish_command_fsm, finish_command_fsm_should_stop): New functions. (finish_command_fsm_clean_up, finish_command_fsm_return_value): New. (finish_command_continuation_free_arg): Delete. (finish_command_fsm_async_reply_reason): New. (finish_backward, finish_forward): Change symbol parameter to a finish_command_fsm. Adjust. (finish_command): Create a finish_command_fsm. Adjust. * infrun.c: Include "thread-fsm.h". (clear_proceed_status_thread): Delete the thread's FSM. (infrun_thread_stop_requested_callback): Cancel the thread's execution command. (clean_up_just_stopped_threads_fsms): New function. (fetch_inferior_event): Handle the event_thread's should_stop method saying the command isn't done yet. (process_event_stop_test): Run breakpoint callbacks here. (print_stop_event): Rename to ... (print_stop_location): ... this. (restore_current_uiout_cleanup): New function. (print_stop_event): Reimplement. (normal_stop): No longer notify the end_stepping_range observers here handle "step N" nor "finish" here. No longer call print_stop_event here. * infrun.h (struct return_value_info): Forward declare. (print_return_value): Declare. (print_stop_event): Change prototype. * thread-fsm.c: New file. * thread-fsm.h: New file. * thread.c: Include "thread-fsm.h". (thread_cancel_execution_command): New function. (clear_thread_inferior_resources): Call it. * cli/cli-interp.c (cli_on_normal_stop): New function. (cli_interpreter_init): Install cli_on_normal_stop as normal_stop observer. * mi/mi-interp.c: Include "thread-fsm.h". (restore_current_uiout_cleanup): Delete. (mi_on_normal_stop): If the thread has an FSM associated, and it finished, ask it for the async-reply-reason to print. Always call print_stop_event here, regardless of the top-level interpreter. Check bpstat_what to tell whether an asynchronous breakpoint hit triggered. * tui/tui-interp.c (tui_on_normal_stop): New function. (tui_init): Install tui_on_normal_stop as normal_stop observer. gdb/testsuite/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * gdb.mi/mi-cli.exp: Add CLI finish tests.
2015-09-09 17:23:24 +00:00
}
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
/* Observer for the signal_received notification. */
static void
tui_on_signal_received (enum gdb_signal siggnal)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct switch_thru_all_uis state;
SWITCH_THRU_ALL_UIS (state)
{
struct interp *tui = as_tui_interp (top_level_interpreter ());
if (tui == NULL)
continue;
print_signal_received_reason (tui_ui_out (tui), siggnal);
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
}
/* Observer for the end_stepping_range notification. */
static void
tui_on_end_stepping_range (void)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct switch_thru_all_uis state;
SWITCH_THRU_ALL_UIS (state)
{
struct interp *tui = as_tui_interp (top_level_interpreter ());
if (tui == NULL)
continue;
print_end_stepping_range_reason (tui_ui_out (tui));
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
}
/* Observer for the signal_exited notification. */
static void
tui_on_signal_exited (enum gdb_signal siggnal)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct switch_thru_all_uis state;
SWITCH_THRU_ALL_UIS (state)
{
struct interp *tui = as_tui_interp (top_level_interpreter ());
if (tui == NULL)
continue;
print_signal_exited_reason (tui_ui_out (tui), siggnal);
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
}
/* Observer for the exited notification. */
static void
tui_on_exited (int exitstatus)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct switch_thru_all_uis state;
SWITCH_THRU_ALL_UIS (state)
{
struct interp *tui = as_tui_interp (top_level_interpreter ());
if (tui == NULL)
continue;
print_exited_reason (tui_ui_out (tui), exitstatus);
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
}
/* Observer for the no_history notification. */
static void
tui_on_no_history (void)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct switch_thru_all_uis state;
SWITCH_THRU_ALL_UIS (state)
{
struct interp *tui = as_tui_interp (top_level_interpreter ());
if (tui == NULL)
continue;
print_no_history_reason (tui_ui_out (tui));
}
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 12:09:45 +00:00
}
Make display_gdb_prompt CLI-only. Enabling target-async by default will require implementing sync execution on top of an async target, much like foreground command are implemented on the CLI in async mode. In order to do that, we will need better control of when to print the MI prompt. Currently the interp->display_prompt_p hook is all we have, and MI just always returns false, meaning, make display_gdb_prompt a no-op. We'll need to be able to know to print the MI prompt in some of the conditions that display_gdb_prompt is called from the core, but not all. This is all a litte twisted currently. As we can see, display_gdb_prompt is really CLI specific, so make the console interpreters (console/tui) themselves call it. To be able to do that, and add a few different observers that the interpreters can use to distinguish when or why the the prompt is being printed: #1 - one called whenever a command is cancelled due to an error. #2 - another for when a foreground command just finished. In both cases, CLI wants to print the prompt, while MI doesn't. MI will want to print the prompt in the second case when in a special MI mode. The display_gdb_prompt call in interp_set made me pause. The comment there reads: /* Finally, put up the new prompt to show that we are indeed here. Also, display_gdb_prompt for the console does some readline magic which is needed for the console interpreter, at least... */ But, that looks very much like a no-op to me currently: - the MI interpreter always return false in the prompt hook, meaning actually display no prompt. - the interpreter used at that point is still quiet. And the console/tui interpreters return false in the prompt hook if they're quiet, meaning actually display no prompt. The only remaining possible use would then be the readline magic. But whatever that might have been, it's not reacheable today either, because display_gdb_prompt returns early, before touching readline if the interpreter returns false in the display_prompt_p hook. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete. (_initialize_cli_interp): Adjust. * event-loop.c: Include "observer.h". (start_event_loop): Notify 'command_error' observers instead of calling display_gdb_prompt. Remove FIXME comment. * event-top.c (display_gdb_prompt): Remove call into the interpreters. * inf-loop.c: Include "observer.h". (inferior_event_handler): Notify 'command_error' observers instead of calling display_gdb_prompt. * infrun.c (fetch_inferior_event): Notify 'sync_execution_done' observers instead of calling display_gdb_prompt. * interps.c (interp_set): Don't call display_gdb_prompt. (current_interp_display_prompt_p): Delete. * interps.h (interp_prompt_p): Delete declaration. (interp_prompt_p_ftype): Delete. (struct interp_procs) <prompt_proc_p>: Delete field. (current_interp_display_prompt_p): Delete declaration. * mi-interp.c (mi_interpreter_prompt_p): Delete. (_initialize_mi_interp): Adjust. * tui-interp.c (tui_init): Install 'sync_execution_done' and 'command_error' observers. (tui_on_sync_execution_done, tui_on_command_error): New functions. (tui_display_prompt_p): Delete. (_initialize_tui_interp): Adjust. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> * observer.texi (sync_execution_done, command_error): New subjects.
2014-05-23 10:37:12 +00:00
/* Observer for the sync_execution_done notification. */
static void
tui_on_sync_execution_done (void)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct interp *tui = as_tui_interp (top_level_interpreter ());
if (tui == NULL)
return;
display_gdb_prompt (NULL);
Make display_gdb_prompt CLI-only. Enabling target-async by default will require implementing sync execution on top of an async target, much like foreground command are implemented on the CLI in async mode. In order to do that, we will need better control of when to print the MI prompt. Currently the interp->display_prompt_p hook is all we have, and MI just always returns false, meaning, make display_gdb_prompt a no-op. We'll need to be able to know to print the MI prompt in some of the conditions that display_gdb_prompt is called from the core, but not all. This is all a litte twisted currently. As we can see, display_gdb_prompt is really CLI specific, so make the console interpreters (console/tui) themselves call it. To be able to do that, and add a few different observers that the interpreters can use to distinguish when or why the the prompt is being printed: #1 - one called whenever a command is cancelled due to an error. #2 - another for when a foreground command just finished. In both cases, CLI wants to print the prompt, while MI doesn't. MI will want to print the prompt in the second case when in a special MI mode. The display_gdb_prompt call in interp_set made me pause. The comment there reads: /* Finally, put up the new prompt to show that we are indeed here. Also, display_gdb_prompt for the console does some readline magic which is needed for the console interpreter, at least... */ But, that looks very much like a no-op to me currently: - the MI interpreter always return false in the prompt hook, meaning actually display no prompt. - the interpreter used at that point is still quiet. And the console/tui interpreters return false in the prompt hook if they're quiet, meaning actually display no prompt. The only remaining possible use would then be the readline magic. But whatever that might have been, it's not reacheable today either, because display_gdb_prompt returns early, before touching readline if the interpreter returns false in the display_prompt_p hook. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete. (_initialize_cli_interp): Adjust. * event-loop.c: Include "observer.h". (start_event_loop): Notify 'command_error' observers instead of calling display_gdb_prompt. Remove FIXME comment. * event-top.c (display_gdb_prompt): Remove call into the interpreters. * inf-loop.c: Include "observer.h". (inferior_event_handler): Notify 'command_error' observers instead of calling display_gdb_prompt. * infrun.c (fetch_inferior_event): Notify 'sync_execution_done' observers instead of calling display_gdb_prompt. * interps.c (interp_set): Don't call display_gdb_prompt. (current_interp_display_prompt_p): Delete. * interps.h (interp_prompt_p): Delete declaration. (interp_prompt_p_ftype): Delete. (struct interp_procs) <prompt_proc_p>: Delete field. (current_interp_display_prompt_p): Delete declaration. * mi-interp.c (mi_interpreter_prompt_p): Delete. (_initialize_mi_interp): Adjust. * tui-interp.c (tui_init): Install 'sync_execution_done' and 'command_error' observers. (tui_on_sync_execution_done, tui_on_command_error): New functions. (tui_display_prompt_p): Delete. (_initialize_tui_interp): Adjust. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> * observer.texi (sync_execution_done, command_error): New subjects.
2014-05-23 10:37:12 +00:00
}
/* Observer for the command_error notification. */
static void
tui_on_command_error (void)
{
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
struct interp *tui = as_tui_interp (top_level_interpreter ());
if (tui == NULL)
return;
display_gdb_prompt (NULL);
Make display_gdb_prompt CLI-only. Enabling target-async by default will require implementing sync execution on top of an async target, much like foreground command are implemented on the CLI in async mode. In order to do that, we will need better control of when to print the MI prompt. Currently the interp->display_prompt_p hook is all we have, and MI just always returns false, meaning, make display_gdb_prompt a no-op. We'll need to be able to know to print the MI prompt in some of the conditions that display_gdb_prompt is called from the core, but not all. This is all a litte twisted currently. As we can see, display_gdb_prompt is really CLI specific, so make the console interpreters (console/tui) themselves call it. To be able to do that, and add a few different observers that the interpreters can use to distinguish when or why the the prompt is being printed: #1 - one called whenever a command is cancelled due to an error. #2 - another for when a foreground command just finished. In both cases, CLI wants to print the prompt, while MI doesn't. MI will want to print the prompt in the second case when in a special MI mode. The display_gdb_prompt call in interp_set made me pause. The comment there reads: /* Finally, put up the new prompt to show that we are indeed here. Also, display_gdb_prompt for the console does some readline magic which is needed for the console interpreter, at least... */ But, that looks very much like a no-op to me currently: - the MI interpreter always return false in the prompt hook, meaning actually display no prompt. - the interpreter used at that point is still quiet. And the console/tui interpreters return false in the prompt hook if they're quiet, meaning actually display no prompt. The only remaining possible use would then be the readline magic. But whatever that might have been, it's not reacheable today either, because display_gdb_prompt returns early, before touching readline if the interpreter returns false in the display_prompt_p hook. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interpreter_display_prompt_p): Delete. (_initialize_cli_interp): Adjust. * event-loop.c: Include "observer.h". (start_event_loop): Notify 'command_error' observers instead of calling display_gdb_prompt. Remove FIXME comment. * event-top.c (display_gdb_prompt): Remove call into the interpreters. * inf-loop.c: Include "observer.h". (inferior_event_handler): Notify 'command_error' observers instead of calling display_gdb_prompt. * infrun.c (fetch_inferior_event): Notify 'sync_execution_done' observers instead of calling display_gdb_prompt. * interps.c (interp_set): Don't call display_gdb_prompt. (current_interp_display_prompt_p): Delete. * interps.h (interp_prompt_p): Delete declaration. (interp_prompt_p_ftype): Delete. (struct interp_procs) <prompt_proc_p>: Delete field. (current_interp_display_prompt_p): Delete declaration. * mi-interp.c (mi_interpreter_prompt_p): Delete. (_initialize_mi_interp): Adjust. * tui-interp.c (tui_init): Install 'sync_execution_done' and 'command_error' observers. (tui_on_sync_execution_done, tui_on_command_error): New functions. (tui_display_prompt_p): Delete. (_initialize_tui_interp): Adjust. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> * observer.texi (sync_execution_done, command_error): New subjects.
2014-05-23 10:37:12 +00:00
}
/* These implement the TUI interpreter. */
static void *
gdb/ 2011-09-12 Pedro Alves <pedro@codesourcery.com> Matt Rice <ratmice@gmail.com> PR gdb/13175 * interps.c (struct interp) <interpreter_out>: Delete field. (interp_new): Remove the data and uiout parameters and adjust. (interp_set): Only set the current_uiout from the interpreter's uiout after initializing the interpreter. Adjust call to init_proc. (interp_ui_out): Adjust to call procs->ui_out_proc. (interp_data, interp_name): New. * interps.h (interp_init_ftype): Add `self' parameter. (interp_ui_out_ftype): New typedef. (struct interp_procs) <ui_out_proc>: New method pointer. (interp_new): Remove the data and uiout parameters. (interp_data, interp_name): Declare. * tui/tui-interp.c (tui_init): Adjust prototype. (tui_ui_out): New. (_initialize_tui_interp): Install tui_ui_out. Don't instanciate tui_out here. Adjust call to interp_new. * tui/tui-io.c (tui_initialize_io): Don't set current_uiout here. * cli/cli-interp.c (cli_interpreter_init): Adjust prototype. (cli_ui_out): New. (_initialize_cli_interp): Install it. Adjust call to interp_new. * mi/mi-common.h (struct mi_interp) <uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust prototype. Initialize mi->uiout depending on the mi_version as extracted from the interpreter's name. (mi_ui_out): New. (_initialize_mi_interp): Install mi_ui_out. Adjust calls to interp_new. Don't allocate the ui_out's of the interpreters here. gdb/testsuite/ 2011-09-12 Matt Rice <ratmice@gmail.com> Pedro Alves <pedro@codesourcery.com> PR gdb/13175 * gdb.base/interp.exp: New tests. * gdb.base/interp.c: New file.
2011-09-12 21:25:22 +00:00
tui_init (struct interp *self, int top_level)
{
/* Install exit handler to leave the screen in a good shape. */
atexit (tui_exit);
2004-02-06 Andrew Cagney <cagney@redhat.com> * tui/tui-data.h (struct tui_list): Rename _TuiList. (enum tui_data_type): Rename _TuiDataType. (struct tui_layout_def): Rename _TuiLayoutDef. (struct tui_source_element): Rename _TuiSourceElement. (struct tui_data_element): Rename _TuiDataElement. (struct tui_command_element): Rename _TuiCommandElement. (struct tui_locator_element): Rename _TuiLocatorElement. (union tui_which_element): Define. (struct tui_win_element): Rename _TuiWinElement. (struct tui_data_info): Rename _TuiDataInfo. (struct tui_source_info): Rename _TuiSourceInfo. (struct tui_command_info): Rename _TuiCommandInfo. (tui_initialize_static_data): Rename initializeStaticData. (tui_alloc_generic_win_info): Rename allocGenericWinInfo. (tui_alloc_win_info): Rename allocWinInfo. (tui_init_generic_part): Rename initGenericPart. (tui_init_win_info): Rename initWinInfo. (tui_alloc_content): Rename allocContent. (tui_add_content_elements): Rename addContentElements. (tui_init_content_element): Rename initContentElement. (tui_free_window): Rename freeWindow. (tui_free_win_content): Rename freeWinContent. (tui_free_data_content): Rename freeDataContent. (tui_free_all_source_wins_content): Rename freeAllSourceWinsContent. (tui_del_window): Rename tuiDelWindow. (tui_del_data_windows): Rename tuiDelDataWindows. (tui_partial_win_by_name): Rename partialWinByName. (tui_win_name): Rename winName. (tui_current_layout): Rename currentLayout. (tui_set_current_layout_to): Rename setCurrentLayoutTo. (tui_term_height): Rename termHeight. (tui_set_term_height_to): Rename setTermHeightTo. (tui_term_width): Rename termWidth. (tui_set_term_width_to): Rename setTermWidthTo. (tui_set_gen_win_origin): Rename setGenWinOrigin. (tui_locator_win_info_ptr): Rename locatorWinInfoPtr. (tui_source_exec_info_win_ptr): Rename tui_gen_win_info. (tui_disassem_exec_info_win_ptr): Rename disassemExecInfoWinPtr. (tui_source_windows): Rename sourceWindows. (tui_clear_source_windows): Rename clearSourceWindows. (tui_clear_source_windows_detail): Rename clearSourceWindowsDetail. (tui_clear_win_detail): Rename clearWinDetail. (tui_add_to_source_windows): Rename tuiAddToSourceWindows. (tui_default_tab_len): Rename tuiDefaultTabLen. (tui_set_default_tab_len): Rename tuiSetDefaultTabLen. (tui_win_with_focus): Rename tuiWinWithFocus. (tui_set_win_with_focus): Rename tuiSetWinWithFocus. (tui_layout_def): Rename tuiLayoutDef. (tui_win_resized): Rename tuiWinResized. (tui_set_win_resized_to): Rename tuiSetWinResizedTo. (tui_next_win): Rename tuiNextWin. (tui_prev_win): Rename tuiPrevWin. (tui_add_to_source_windows): Rename addToSourceWindows. * tui/tui-winsource.c, tui/tui-win.c: Update references. * tui/tui-layout.c, tui/tui-source.c: Ditto. * tui/tui-stack.c, tui/tui-io.c: Ditto. * tui/tui.c, tui/tui-data.c: Ditto. * tui/tui-interp.c, tui/tui-data.c: Ditto. * tui/tui-disasm.c, tui/tui-command.c: Ditto.
2004-02-07 04:40:36 +00:00
tui_initialize_static_data ();
tui_initialize_io ();
tui_initialize_win ();
if (ui_file_isatty (gdb_stdout))
tui_initialize_readline ();
return NULL;
}
static int
tui_resume (void *data)
{
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 00:11:48 +00:00
struct ui *ui = current_ui;
struct ui_file *stream;
/* gdb_setup_readline will change gdb_stdout. If the TUI was
previously writing to gdb_stdout, then set it to the new
gdb_stdout afterwards. */
stream = cli_out_set_stream (tui_old_uiout, gdb_stdout);
if (stream != gdb_stdout)
{
cli_out_set_stream (tui_old_uiout, stream);
stream = NULL;
}
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 00:11:48 +00:00
gdb_setup_readline (1);
ui->input_handler = command_line_handler;
if (stream != NULL)
cli_out_set_stream (tui_old_uiout, gdb_stdout);
if (tui_start_enabled)
tui_enable ();
return 1;
}
static int
tui_suspend (void *data)
{
tui_start_enabled = tui_active;
tui_disable ();
return 1;
}
gdb/ 2011-09-12 Pedro Alves <pedro@codesourcery.com> Matt Rice <ratmice@gmail.com> PR gdb/13175 * interps.c (struct interp) <interpreter_out>: Delete field. (interp_new): Remove the data and uiout parameters and adjust. (interp_set): Only set the current_uiout from the interpreter's uiout after initializing the interpreter. Adjust call to init_proc. (interp_ui_out): Adjust to call procs->ui_out_proc. (interp_data, interp_name): New. * interps.h (interp_init_ftype): Add `self' parameter. (interp_ui_out_ftype): New typedef. (struct interp_procs) <ui_out_proc>: New method pointer. (interp_new): Remove the data and uiout parameters. (interp_data, interp_name): Declare. * tui/tui-interp.c (tui_init): Adjust prototype. (tui_ui_out): New. (_initialize_tui_interp): Install tui_ui_out. Don't instanciate tui_out here. Adjust call to interp_new. * tui/tui-io.c (tui_initialize_io): Don't set current_uiout here. * cli/cli-interp.c (cli_interpreter_init): Adjust prototype. (cli_ui_out): New. (_initialize_cli_interp): Install it. Adjust call to interp_new. * mi/mi-common.h (struct mi_interp) <uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust prototype. Initialize mi->uiout depending on the mi_version as extracted from the interpreter's name. (mi_ui_out): New. (_initialize_mi_interp): Install mi_ui_out. Adjust calls to interp_new. Don't allocate the ui_out's of the interpreters here. gdb/testsuite/ 2011-09-12 Matt Rice <ratmice@gmail.com> Pedro Alves <pedro@codesourcery.com> PR gdb/13175 * gdb.base/interp.exp: New tests. * gdb.base/interp.c: New file.
2011-09-12 21:25:22 +00:00
static struct ui_out *
tui_ui_out (struct interp *self)
{
if (tui_active)
return tui_out;
else
return tui_old_uiout;
}
static struct gdb_exception
tui_exec (void *data, const char *command_str)
{
2005-02-11 Andrew Cagney <cagney@gnu.org> Mark up error_no_arg, query, perror_with_name, complaint, and internal_error. * breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update. * cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update. * dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update. * exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update. * frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update. * gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update. * go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update. * i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update. * i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update. * infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update. * interps.c, language.c, linespec.c, linux-nat.c: Update. * m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update. * m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update. * macrotab.c, maint.c, mdebugread.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update. * mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update. * objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update. * parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update. * ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update. * regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update. * remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update. * s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update. * sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update. * solib-aix5.c, solib-svr4.c, solib.c, source.c: Update. * sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update. * symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update. * utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update. * win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update. * cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update. * cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update. * mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update. * tui/tui-file.c, tui/tui-interp.c: Update.
2005-02-11 18:13:55 +00:00
internal_error (__FILE__, __LINE__, _("tui_exec called"));
}
Introduce interpreter factories If every UI instance has its own set of interpreters, then the current scheme of creating the interpreters at GDB initialization time no longer works. We need to create them whenever a new UI instance is created. The scheme implemented here has each interpreter register a factory callback that when called creates a new instance of a specific interpreter type. Then, when some code in gdb looks up an interpreter (always by name), if there's none yet, the factory method is called to construct one. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_uiout): Delete, moved into ... (struct cli_interp): ... this new structure. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Use interp_ui_out. (cli_interpreter_init): If top level, set the cli_interp global. (cli_interpreter_init): Return the interp's data instead of NULL. (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust to cli_uiout being in the interpreter's data. (cli_interp_procs): New, factored out from _initialize_cli_interp. (cli_interp_factory): New function. (_initialize_cli_interp): Call interp_factory_register. * interps.c (get_interp_info): New, factored out from ... (get_current_interp_info): ... this. (interp_new): Add parameter 'data'. Store it. (struct interp_factory): New function. (interp_factory_p): New typedef. Define a VEC_P. (interpreter_factories): New global. (interp_factory_register): New function. (interp_add): Add 'ui' parameter. Use get_interp_info and interp_lookup_existing. (interp_lookup): Rename to ... (interp_lookup_existing): ... this. Add 'ui' parameter. Don't check for NULL or empty name here. (interp_lookup): Add 'ui' parameter and reimplement. (interp_set_temp, interpreter_exec_cmd): Adjust. (interpreter_completer): Complete on registered interpreter factories instead of interpreters. * interps.h (interp_factory_func): New typedef. (interp_factory_register): Declare. (interp_new, interp_add): Adjust. (interp_lookup): Declare. * main.c (captured_main): Adjust. * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust. (mi_interp_procs): New, factored out from _initialize_mi_interp. (mi_interp_factory): New function. * python/python.c (execute_gdb_command): Adjust. * tui/tui-interp.c (tui_init): If top level, set the tui_interp global. (tui_interp_procs): New. (tui_interp_factory): New function. (_initialize_tui_interp): Call interp_factory_register.
2016-06-21 00:11:45 +00:00
/* The TUI interpreter's vtable. */
static const struct interp_procs tui_interp_procs = {
tui_init,
tui_resume,
tui_suspend,
tui_exec,
tui_ui_out,
NULL,
Simplify starting the command event loop All interpreter types (CLI/TUI/MI) print the prompt, and then call start_event_loop. Because we'll need an interpreter hook to display the interpreter-specific prompt before going back to the event loop, without actually starting an event loop, this patch moves the start_event_loop call to common code, and replaces the command_loop hook with a pre_command_look hook, that now just prints the prompt. Turns out to be a cleanup on its own right anyway. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interpreter_pre_command_loop): New function. (cli_interp_procs): Install it instead of cli_command_loop. * cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare. * event-top.c (cli_command_loop): Delete. * interps.c (interp_new): Remove reference to command_loop_proc. (current_interp_command_loop): Delete. (interp_pre_command_loop): New function. (interp_command_loop_ftype): Delete. * interps.h (interp_pre_command_loop_ftype): New typedef. (struct interp_procs) <command_loop_proc>: Delele field. <pre_command_loop_proc>: New field. (current_interp_command_loop): Delete declaration. (interp_pre_command_loop): New declaration. * main.c (captured_command_loop): Call interp_pre_command_loop instead of current_interp_command_loop and start an event loop. * mi/mi-interp.c (mi_command_loop): Delete. (mi_interpreter_pre_command_loop): New. (mi_interp_procs): Update. * tui/tui-interp.c (tui_interp_procs): Install cli_interpreter_pre_command_loop instead of cli_command_loop.
2016-06-21 00:11:51 +00:00
cli_interpreter_pre_command_loop,
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 00:11:48 +00:00
cli_interpreter_supports_command_editing,
Introduce interpreter factories If every UI instance has its own set of interpreters, then the current scheme of creating the interpreters at GDB initialization time no longer works. We need to create them whenever a new UI instance is created. The scheme implemented here has each interpreter register a factory callback that when called creates a new instance of a specific interpreter type. Then, when some code in gdb looks up an interpreter (always by name), if there's none yet, the factory method is called to construct one. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_uiout): Delete, moved into ... (struct cli_interp): ... this new structure. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Use interp_ui_out. (cli_interpreter_init): If top level, set the cli_interp global. (cli_interpreter_init): Return the interp's data instead of NULL. (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust to cli_uiout being in the interpreter's data. (cli_interp_procs): New, factored out from _initialize_cli_interp. (cli_interp_factory): New function. (_initialize_cli_interp): Call interp_factory_register. * interps.c (get_interp_info): New, factored out from ... (get_current_interp_info): ... this. (interp_new): Add parameter 'data'. Store it. (struct interp_factory): New function. (interp_factory_p): New typedef. Define a VEC_P. (interpreter_factories): New global. (interp_factory_register): New function. (interp_add): Add 'ui' parameter. Use get_interp_info and interp_lookup_existing. (interp_lookup): Rename to ... (interp_lookup_existing): ... this. Add 'ui' parameter. Don't check for NULL or empty name here. (interp_lookup): Add 'ui' parameter and reimplement. (interp_set_temp, interpreter_exec_cmd): Adjust. (interpreter_completer): Complete on registered interpreter factories instead of interpreters. * interps.h (interp_factory_func): New typedef. (interp_factory_register): Declare. (interp_new, interp_add): Adjust. (interp_lookup): Declare. * main.c (captured_main): Adjust. * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust. (mi_interp_procs): New, factored out from _initialize_mi_interp. (mi_interp_factory): New function. * python/python.c (execute_gdb_command): Adjust. * tui/tui-interp.c (tui_init): If top level, set the tui_interp global. (tui_interp_procs): New. (tui_interp_factory): New function. (_initialize_tui_interp): Call interp_factory_register.
2016-06-21 00:11:45 +00:00
};
/* Factory for TUI interpreters. */
static struct interp *
tui_interp_factory (const char *name)
{
return interp_new (name, &tui_interp_procs, NULL);
}
2008-02-21 Pedro Alves <pedro@codesorcery.com> Silence a few -Wmissing-prototypes warnings. PR build/9877: * amd64-nat.c: Include "amd64-nat.h". * fork-child.c (_initialize_fork_child): Ditto. * gcore.c (_initialize_gcore): Ditto. * inf-ptrace.c: Include "inf-ptrace.h". (inf_ptrace_store_registers): Make it static. * linux-nat.c (linux_nat_terminal_ours): Make it static. (_initialize_linux_nat): Declare before definition. * linux-tdep.c: Include "linux-tdep.h". * linux-thread-db.c (_initialize_thread_db): Declare before definition. * proc-service.c (_initialize_proc_service): Ditto. * remote.c (remote_send_printf): Make it static. * solib.c: Include "solib.h". * symfile-mem.c (_initialize_symfile_mem): Declare before definition. * ada-lang.c (ada_la_decode, ada_match_name) (ada_suppress_symbol_printing, ada_is_array_type) (ada_value_ptr_subscript, ada_array_length) (ada_to_static_fixed_value): Make them static. (_initialize_ada_language): Declare before definition. * ada-tasks.c (ada_get_task_number, ada_get_environment_task) (ada_task_list_changed, ada_new_objfile_observer): Make them static. (_initialize_tasks): Declare before definition. * addrmap.c (_initialize_addrmap): Declare before definition. * auxv.c (default_auxv_parse): Make it static. * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make them static. * breakpoint.c (remove_sal): Add line break. (expand_line_sal_maybe): Make it static. * cp-name-parser.y: Include "cp-support.h". * cp-valprint.c (cp_find_class_member): Make it static. * eval.c (value_f90_subarray): Ditto. * exceptions.c (print_any_exception): Ditto. * findcmd.c (_initialize_mem_search): Declare before definition. * frame.c (frame_observer_target_changed): Make it static. * gnu-v3-abi.c (gnuv3_find_method_in): Make it static. * inf-child.c: Include "inf-child.h". * inferior.h (valid_inferior_id): Rename to ... (valid_gdb_inferior_id): ... this. * infrun.c (infrun_thread_stop_requested, siginfo_make_value): Make them static. * jv-lang.c (java_language_arch_info): Make it static. * m2-typeprint.c (m2_get_discrete_bounds): Ditto. * osdata.c (info_osdata_command): Make it static. * regcache.c (regcache_observer_target_changed): Make it static. * reverse.c (_initialize_reverse): Declare before definition. * stabsread.c (cleanup_undefined_types_noname) (cleanup_undefined_types_1): Make them static. * symfile.c (place_section): Make it static. * symtab.c (find_pc_sect_psymtab_closer): Make it static. * target-descriptions.c (_initialize_target_descriptions): Declare before definition. * target.c (default_get_ada_task_ptid, find_default_can_async_p) (find_default_is_async_p, find_default_supports_non_stop): Make them static. (target_supports_non_stop): Add prototype. (dummy_pid_to_str): Make it static. * utils.c (_initialize_utils): Declare before definition. * ada-exp.y (_initialize_ada_exp): Declare before definition. * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype. * target.h (struct target_ops): Add a prototype to the to_can_execute_reverse callback. * macroscope.c (_initialize_macroscope): Declare before definition. * cp-namespace.c (_initialize_cp_namespace): Declare before definition. * python/python.c (_initialize_python): Declare before definition. * tui/tui-command.c: Include "tui/tui-command.h". * tui/tui-data.c (init_content_element, init_win_info): Make them static. * tui/tui-disasm.c: Include "tui/tui-disasm.h". * tui/tui-interp.c (_initialize_tui_interp): Declare before definition. * tui/tui-layout.c: Include "tui/tui-layout.h". (_initialize_tui_layout): Declare before definition. * tui/tui-regs.c: Include "tui/tui-regs.h". (tui_display_reg_element_at_line): Make it static. (_initialize_tui_regs): Declare before definition. * tui/tui-stack.c (_initialize_tui_stack): Declare before definition. * tui/tui-win.c: Include "tui/tui-win.h". (_initialize_tui_win): Declare before definition. (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH. * tui/tui-win.h (tui_sigwinch_handler): Delete declaration. (tui_get_cmd_list): Add a prototype. * tui/tui-windata.c: Include tui-windata.h. * tui/tui-wingeneral.c (box_win): Make it static. * cli/cli-logging.c (show_logging_command): Make it static. (_initialize_cli_logging): Declare before definition. * mi/mi-common.c (_initialize_gdb_mi_common): Declare before definition.
2009-02-21 16:14:50 +00:00
/* Provide a prototype to silence -Wmissing-prototypes. */
extern initialize_file_ftype _initialize_tui_interp;
void
_initialize_tui_interp (void)
{
Introduce interpreter factories If every UI instance has its own set of interpreters, then the current scheme of creating the interpreters at GDB initialization time no longer works. We need to create them whenever a new UI instance is created. The scheme implemented here has each interpreter register a factory callback that when called creates a new instance of a specific interpreter type. Then, when some code in gdb looks up an interpreter (always by name), if there's none yet, the factory method is called to construct one. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_uiout): Delete, moved into ... (struct cli_interp): ... this new structure. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Use interp_ui_out. (cli_interpreter_init): If top level, set the cli_interp global. (cli_interpreter_init): Return the interp's data instead of NULL. (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust to cli_uiout being in the interpreter's data. (cli_interp_procs): New, factored out from _initialize_cli_interp. (cli_interp_factory): New function. (_initialize_cli_interp): Call interp_factory_register. * interps.c (get_interp_info): New, factored out from ... (get_current_interp_info): ... this. (interp_new): Add parameter 'data'. Store it. (struct interp_factory): New function. (interp_factory_p): New typedef. Define a VEC_P. (interpreter_factories): New global. (interp_factory_register): New function. (interp_add): Add 'ui' parameter. Use get_interp_info and interp_lookup_existing. (interp_lookup): Rename to ... (interp_lookup_existing): ... this. Add 'ui' parameter. Don't check for NULL or empty name here. (interp_lookup): Add 'ui' parameter and reimplement. (interp_set_temp, interpreter_exec_cmd): Adjust. (interpreter_completer): Complete on registered interpreter factories instead of interpreters. * interps.h (interp_factory_func): New typedef. (interp_factory_register): Declare. (interp_new, interp_add): Adjust. (interp_lookup): Declare. * main.c (captured_main): Adjust. * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust. (mi_interp_procs): New, factored out from _initialize_mi_interp. (mi_interp_factory): New function. * python/python.c (execute_gdb_command): Adjust. * tui/tui-interp.c (tui_init): If top level, set the tui_interp global. (tui_interp_procs): New. (tui_interp_factory): New function. (_initialize_tui_interp): Call interp_factory_register.
2016-06-21 00:11:45 +00:00
interp_factory_register (INTERP_TUI, tui_interp_factory);
if (interpreter_p && strcmp (interpreter_p, INTERP_TUI) == 0)
tui_start_enabled = 1;
if (interpreter_p && strcmp (interpreter_p, INTERP_CONSOLE) == 0)
{
xfree (interpreter_p);
interpreter_p = xstrdup (INTERP_TUI);
}
Make the intepreters output to all UIs When we have multiple consoles, MI channels, etc., then we need to broadcast breakpoint hits, etc. to all UIs. In the past, I've adjusted most of the run control to communicate events to the interpreters through observer notifications, so events would be properly sent to console and MI streams, in sync and async modes. This patch does the next logical step -- have each interpreter's observers output interpreter-specific info to _all_ UIs. Note that when we have multiple instances of active cli/tui interpreters, then the cli_interp and tui_interp globals no longer work. This is addressed by this patch. Also, the interpreters currently register some observers when resumed and remove them when suspended. If we have multiple instances of the interpreters, and they can be suspended/resumed at different, independent times, that no longer works. What we instead do is always install the observers, and then have the observers themselves know when to do nothing. An earlier prototype of this series did the looping over struct UIs in common code, and then dispatched events to the interpreters through a matching interp_on_foo method for each observer. That turned out a lot more complicated than the present solution, as we'd end up with having to create a new interp method every time some interpreter wanted to listen to some observer notification, resulting in a lot of duplicated make-work and more coupling than desirable. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (cli_interp): Delete. (as_cli_interp): New function. (cli_on_normal_stop, cli_on_signal_received) (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited) (cli_on_no_history): Send output to all CLI UIs. (cli_on_sync_execution_done, cli_on_command_error): Skip output if the top level interpreter is not a CLI. (cli_interpreter_init): Don't set cli_interp or install observers here. (_initialize_cli_interp): Install observers here. * event-top.c (main_ui_, ui_list): New globals. (current_ui): Point to main_ui_. (restore_ui_cleanup, switch_thru_all_uis_init) (switch_thru_all_uis_cond, switch_thru_all_uis_next): New functions. * mi/mi-interp.c (as_mi_interp): New function. (mi_interpreter_init): Don't install observers here. (mi_on_sync_execution_done): Skip output if the top level interpreter is not a MI. (mi_new_thread, mi_thread_exit, mi_record_changed) (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit) (mi_inferior_removed): Send output to all MI UIs. (find_mi_interpreter, mi_interp_data): Delete. (find_mi_interp): New function. (mi_on_signal_received, mi_on_end_stepping_range) (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output to all MI UIs. (mi_on_normal_stop): Rename to ... (mi_on_normal_stop_1): ... this. (mi_on_normal_stop): Reimplement, sending output to all MI UIs. (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted) (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_output_running_pid): Send output to all MI UIs. (mi_on_resume): Rename to ... (mi_on_resume_1): ... this. Don't handle infcalls here. (mi_on_resume): Reimplement, sending output to all MI UIs. (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed) (mi_memory_changed): Send output to all MI UIs. (report_initial_inferior): Install observers here. * top.h (struct ui) <next>: New field. (ui_list): Declare. (struct switch_thru_all_uis): New. (switch_thru_all_uis_init, switch_thru_all_uis_cond) (switch_thru_all_uis_next): Declare. (SWITCH_THRU_ALL_UIS): New macro. * tui/tui-interp.c (tui_interp): Delete global. (as_tui_interp): New function. (tui_on_normal_stop, tui_on_signal_received) (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited) (tui_on_no_history): Send output to all TUI UIs. (tui_on_sync_execution_done, tui_on_command_error): Skip output if the top level interpreter is not a TUI. (tui_init): Don't set tui_interp or install observers here. (_initialize_tui_interp): Install observers here.
2016-06-21 00:11:45 +00:00
/* If changing this, remember to update cli-interp.c as well. */
observer_attach_normal_stop (tui_on_normal_stop);
observer_attach_signal_received (tui_on_signal_received);
observer_attach_end_stepping_range (tui_on_end_stepping_range);
observer_attach_signal_exited (tui_on_signal_exited);
observer_attach_exited (tui_on_exited);
observer_attach_no_history (tui_on_no_history);
observer_attach_sync_execution_done (tui_on_sync_execution_done);
observer_attach_command_error (tui_on_command_error);
}