Don't let two frames with the same id end up in the frame chain.
The UNWIND_SAME_ID check is done between THIS_FRAME and the next frame
when we go try to unwind the previous frame. But at this point, it's
already too late -- we ended up with two frames with the same ID in
the frame chain. Each frame having its own ID is an invariant assumed
throughout GDB. This patch applies the UNWIND_SAME_ID detection
earlier, right after the previous frame is unwound, discarding the dup
frame if a cycle is detected.
The patch includes a new test that fails before the change. Before
the patch, the test causes an infinite loop in GDB, after the patch,
the UNWIND_SAME_ID logic kicks in and makes the backtrace stop with:
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
The test uses dwarf CFI to emulate a corrupted stack with a cycle. It
has a function with registers marked DW_CFA_same_value (most
importantly RSP/RIP), so that GDB computes the same ID for that frame
and its caller. IOW, something like this:
#0 - frame_id_1
#1 - frame_id_2
#2 - frame_id_3
#3 - frame_id_4
#4 - frame_id_4 <<<< outermost (UNWIND_SAME_ID).
(The test's code is just a copy of dw2-reg-undefined.S /
dw2-reg-undefined.c, adjusted to use DW_CFA_same_value instead of
DW_CFA_undefined, and to mark a different set of registers.)
The infinite loop is here, in value_fetch_lazy:
while (VALUE_LVAL (new_val) == lval_register && value_lazy (new_val))
{
frame = frame_find_by_id (VALUE_FRAME_ID (new_val));
...
new_val = get_frame_register_value (frame, regnum);
}
get_frame_register_value can return a lazy register value pointing to
the next frame. This means that the register wasn't clobbered by
FRAME; the debugger should therefore retrieve its value from the next
frame.
To be clear, get_frame_register_value unwinds the value in question
from the next frame:
struct value *
get_frame_register_value (struct frame_info *frame, int regnum)
{
return frame_unwind_register_value (frame->next, regnum);
^^^^^^^^^^^
}
In other words, if we get a lazy lval_register, it should have the
frame ID of the _next_ frame, never of FRAME.
At this point in value_fetch_lazy, the whole relevant chunk of the
stack up to frame #4 has already been unwound. The loop always
"unlazies" lval_registers in the "next/innermost" direction, not in
the "prev/unwind further/outermost" direction.
So say we're looking at frame #4. get_frame_register_value in frame
#4 can return a lazy register value of frame #3. So the next
iteration, frame_find_by_id tries to read the register from frame #3.
But, since frame #4 happens to have same id as frame #3,
frame_find_by_id returns frame #4 instead. Rinse, repeat, and we have
an infinite loop.
This is an old latent problem, exposed by the recent addition of the
frame stash. Before we had a stash, frame_find_by_id(frame_id_4)
would walk over all frames starting at the current frame, and would
always find #3 first. The stash happens to return #4 instead:
struct frame_info *
frame_find_by_id (struct frame_id id)
{
struct frame_info *frame, *prev_frame;
...
/* Try using the frame stash first. Finding it there removes the need
to perform the search by looping over all frames, which can be very
CPU-intensive if the number of frames is very high (the loop is O(n)
and get_prev_frame performs a series of checks that are relatively
expensive). This optimization is particularly useful when this function
is called from another function (such as value_fetch_lazy, case
VALUE_LVAL (val) == lval_register) which already loops over all frames,
making the overall behavior O(n^2). */
frame = frame_stash_find (id);
if (frame)
return frame;
for (frame = get_current_frame (); ; frame = prev_frame)
{
gdb/
2013-11-22 Pedro Alves <palves@redhat.com>
PR 16155
* frame.c (get_prev_frame_1): Do the UNWIND_SAME_ID check between
this frame and the new previous frame, not between this frame and
the next frame.
gdb/testsuite/
2013-11-22 Pedro Alves <palves@redhat.com>
PR 16155
* gdb.dwarf2/dw2-dup-frame.S: New file.
* gdb.dwarf2/dw2-dup-frame.c: New file.
* gdb.dwarf2/dw2-dup-frame.exp: New file.
2013-11-22 11:51:59 +00:00
|
|
|
/*
|
2016-01-01 04:33:14 +00:00
|
|
|
Copyright 2013-2016 Free Software Foundation, Inc.
|
Don't let two frames with the same id end up in the frame chain.
The UNWIND_SAME_ID check is done between THIS_FRAME and the next frame
when we go try to unwind the previous frame. But at this point, it's
already too late -- we ended up with two frames with the same ID in
the frame chain. Each frame having its own ID is an invariant assumed
throughout GDB. This patch applies the UNWIND_SAME_ID detection
earlier, right after the previous frame is unwound, discarding the dup
frame if a cycle is detected.
The patch includes a new test that fails before the change. Before
the patch, the test causes an infinite loop in GDB, after the patch,
the UNWIND_SAME_ID logic kicks in and makes the backtrace stop with:
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
The test uses dwarf CFI to emulate a corrupted stack with a cycle. It
has a function with registers marked DW_CFA_same_value (most
importantly RSP/RIP), so that GDB computes the same ID for that frame
and its caller. IOW, something like this:
#0 - frame_id_1
#1 - frame_id_2
#2 - frame_id_3
#3 - frame_id_4
#4 - frame_id_4 <<<< outermost (UNWIND_SAME_ID).
(The test's code is just a copy of dw2-reg-undefined.S /
dw2-reg-undefined.c, adjusted to use DW_CFA_same_value instead of
DW_CFA_undefined, and to mark a different set of registers.)
The infinite loop is here, in value_fetch_lazy:
while (VALUE_LVAL (new_val) == lval_register && value_lazy (new_val))
{
frame = frame_find_by_id (VALUE_FRAME_ID (new_val));
...
new_val = get_frame_register_value (frame, regnum);
}
get_frame_register_value can return a lazy register value pointing to
the next frame. This means that the register wasn't clobbered by
FRAME; the debugger should therefore retrieve its value from the next
frame.
To be clear, get_frame_register_value unwinds the value in question
from the next frame:
struct value *
get_frame_register_value (struct frame_info *frame, int regnum)
{
return frame_unwind_register_value (frame->next, regnum);
^^^^^^^^^^^
}
In other words, if we get a lazy lval_register, it should have the
frame ID of the _next_ frame, never of FRAME.
At this point in value_fetch_lazy, the whole relevant chunk of the
stack up to frame #4 has already been unwound. The loop always
"unlazies" lval_registers in the "next/innermost" direction, not in
the "prev/unwind further/outermost" direction.
So say we're looking at frame #4. get_frame_register_value in frame
#4 can return a lazy register value of frame #3. So the next
iteration, frame_find_by_id tries to read the register from frame #3.
But, since frame #4 happens to have same id as frame #3,
frame_find_by_id returns frame #4 instead. Rinse, repeat, and we have
an infinite loop.
This is an old latent problem, exposed by the recent addition of the
frame stash. Before we had a stash, frame_find_by_id(frame_id_4)
would walk over all frames starting at the current frame, and would
always find #3 first. The stash happens to return #4 instead:
struct frame_info *
frame_find_by_id (struct frame_id id)
{
struct frame_info *frame, *prev_frame;
...
/* Try using the frame stash first. Finding it there removes the need
to perform the search by looping over all frames, which can be very
CPU-intensive if the number of frames is very high (the loop is O(n)
and get_prev_frame performs a series of checks that are relatively
expensive). This optimization is particularly useful when this function
is called from another function (such as value_fetch_lazy, case
VALUE_LVAL (val) == lval_register) which already loops over all frames,
making the overall behavior O(n^2). */
frame = frame_stash_find (id);
if (frame)
return frame;
for (frame = get_current_frame (); ; frame = prev_frame)
{
gdb/
2013-11-22 Pedro Alves <palves@redhat.com>
PR 16155
* frame.c (get_prev_frame_1): Do the UNWIND_SAME_ID check between
this frame and the new previous frame, not between this frame and
the next frame.
gdb/testsuite/
2013-11-22 Pedro Alves <palves@redhat.com>
PR 16155
* gdb.dwarf2/dw2-dup-frame.S: New file.
* gdb.dwarf2/dw2-dup-frame.c: New file.
* gdb.dwarf2/dw2-dup-frame.exp: New file.
2013-11-22 11:51:59 +00:00
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
void
|
|
|
|
stop_frame ()
|
|
|
|
{
|
|
|
|
/* The debug information for this frame is modified in the accompanying
|
|
|
|
.S file, to mark a set of registers as being DW_CFA_same_value. */
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
first_frame ()
|
|
|
|
{
|
|
|
|
stop_frame ();
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
main ()
|
|
|
|
{
|
|
|
|
first_frame ();
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|