old-cross-binutils/gdb/ChangeLog

3360 lines
121 KiB
Text
Raw Normal View History

2002-03-27 Andreas Schwab <schwab@suse.de>
* event-top.c (command_line_handler): Remove useless if.
2002-03-27 Andreas Jaeger <aj@suse.de>
* dwarf2cfi.c: Give credit to Daniel Berlin, reformat copyright
comment.
2002-03-27 Michal Ludvig <mludvig@suse.cz>
* x86-64-tdep.h (X86_64_NUM_REGS, X86_64_NUM_GREGS): Delete #defines.
(x86_64_num_regs, x86_64_num_gregs): Added extern variables.
* x86-64-linux-nat.c (x86_64_regmap): Swapped RBX <> RDX, added DS, ES, FS, GS.
(x86_64_linux_dr_get_status, supply_gregset),
(fill_gregset): Changed X86_64_NUM_GREGS to x86_64_num_gregs.
* x86-64-tdep.c (x86_64_register_raw_size_table): Delete.
(x86_64_register_info_table): Add.
(X86_64_NUM_REGS, X86_64_NUM_GREGS): Add.
(x86_64_register_raw_size, x86_64_register_virtual_type),
(x86_64_register_name, _initialize_x86_64_tdep): Changed to reflect new
general x86_64_register_info_table.
(i386_gdbarch_init): gdbarch_register_bytes is now set
dynamicaly during initialization.
* regformats/reg-x86-64.dat: Synced with changes to registers above.
* gdbserver/linux-x86-64-low.c: Ditto.
2002-03-27 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/server.c (main): Call target_signal_to_host_p
and target_signal_to_host on signals received from the remote.
* gdbserver/remote-utils.c (prepare_resume_reply): Call
target_signal_from_host on signals sent to the remote.
* gdbserver/server.h: Add prototypes. Include "gdb/signals.h".
* gdbserver/Makefile.in: Add signals.o. Add -I${INCLUDE_DIR}.
2002-03-27 Daniel Jacobowitz <drow@mvista.com>
* signals/signals.c: Include "server.h" in gdbserver build.
(target_signal_from_name): Don't use STREQ.
(_initialize_signals): Likewise. Don't include function in
gdbserver build.
2002-03-27 Daniel Jacobowitz <drow@mvista.com>
* signals.c: Moved to...
* signals/signals.c: Here.
* Makefile (signals.o): Update.
2002-03-26 Jeff Law (law@redhat.com)
* somread.c (som_symtab_read): Remove some commented out code and
updated related comments. Do not set the minimal symbol table to
mst_solib_trampoline for ST_ENTRY symbols with SS_LOCAL scope
in a dynamic executable.
* hppa-tdep.c (find_proc_framesize): Sanely handle the case
where we are unable to find the minimal symbol for the given
PC value.
2002-03-25 Jeff Law (law@redhat.com)
* linux-proc.c (read_mapping): Scan up to end of line for filename.
2002-03-25 Michal Ludvig <mludvig@suse.cz>
* x86-64-tdep.c (x86_64_skip_prologue): Rewritten from scratch.
2002-03-23 Andrew Cagney <ac131313@redhat.com>
* command.h: Update copyright.
(struct cmd_list_element): Replace definition with opaque
declaration.
(enum cmd_types): Document that it will eventually be moved to
cli/cli-decode.h
(CMD_DEPRECATED, DEPRECATED_WARN_USER): Delete macros.
(MALLOCED_REPLACEMENT): Delete macro.
* Makefile.in (cli_decode_h): Add $(command_h).
(top.o, completer.o, maint.o): Add dependency on $(cli_decode_h).
* top.c: Include "cli/cli-decode.h".
* completer.c: Include "cli/cli-decode.h".
* maint.c: Include "cli/cli-decode.h".
* cli/cli-decode.h: Include "command.h".
(enum command_class): Delete.
(enum cmd_types): Comment out.
(enum cmd_auto_boolean): Delete.
(enum var_types): Delete.
2002-03-23 Andrew Cagney <ac131313@redhat.com>
* cli/cli-decode.c: Include "gdb_assert.h".
(add_set_or_show_cmd): New static function.
(add_set_cmd): Rewrite. Use add_set_or_show_cmd.
(add_show_from_set): Rewrite. Use add_set_or_show_cmd. Don't copy
all fields, such as func, from the set command.
2002-03-23 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS (sh-elf): Change warning flag to -w.
2002-03-23 Andrew Cagney <cagney@redhat.com>
* defs.h (error): Add printf format attribute.
* thread-db.c (thread_from_lwp): Fix error format string.
* stack.c (parse_frame_specification): Ditto.
* cli/cli-decode.c (undef_cmd_error): Ditto.
* scm-lang.c (scm_lookup_name): Ditto.
* tracepoint.c (trace_error): Ditto.
* remote-utils.c (usage): Ditto.
* remote.c (compare_sections_command): Ditto.
Fix PR gdb/328.
2002-03-22 Andrew Cagney <ac131313@redhat.com>
* gdbtypes.c (append_composite_type_field): New function.
(init_composite_type): New function.
* gdbtypes.h (append_composite_type_field): Declare.
(init_composite_type): Ditto.
2002-03-22 Elena Zannoni <ezannoni@redhat.com>
* ppc-linux-tdep.c (ppc_sysv_abi_use_struct_convention): New
function.
* ppc-tdep.h (ppc_sysv_abi_use_struct_convention): Export.
* rs6000-tdep.c (rs6000_gdbarch_init): Use different
structure returning convention for SYSV ABI case, but not
for GNU/Linux, FreeBSD, or NetBSD.
2002-03-22 Daniel Jacobowitz <drow@mvista.com>
* symtab.h (lookup_block_symbol): Add mangled_name argument
to prototype.
* symmisc.c (maintenance_check_symtabs): Call lookup_block_symbol
with new mangled_name argument.
* linespec.c (decode_line_1): Likewise.
* valops (value_of_this): Likewise.
* symtab.c (lookup_transparent_type): Likewise.
(lookup_symbol_aux): Likewise. Accept new mangled_name argument.
(lookup_symbol): If we are given a mangled name, pass it down
to lookup_symbol_aux.
(lookup_block_symbol): If we are given a mangled name to check
against, only return symbols which match it.
2002-03-22 Christopher Faylor <cgf@redhat.com>
* win32-nat.c (child_create_inferior): Check for proper shell to use
here, in case the user changes it on the fly.
(_initialize_inftarg): Remove shell path considerations.
2002-03-21 Elena Zannoni <ezannoni@redhat.com>
* rs6000-tdep.c (rs6000_gdbarch_init): Use correct max size value
for gdbarch_max_register_raw_size and max_register_virtual_size.
Adjust copyright year.
2002-03-21 Daniel Jacobowitz <drow@mvista.com>
* dbxread.c (process_one_symbol): Extend the first N_SLINE
in a function to cover the entire beginning of the function
as well if it does not already.
2002-03-21 Tom Rix <trix@redhat.com>
* rs6000-nat.c (rs6000_ptrace32): Renamed from ptrace32.
(rs6000_ptrace64): Renamed from ptrace64.
2002-03-20 Martin M. Hunt <hunt@redhat.com>
* gdbserver/remote-utils.c (remote_open): Don't call
getprotobyname, we're all using TCP here so just use
IPPROTO_TCP.
* gdbserver/gdbreplay.c (remote_open): Ditto.
2002-03-20 Martin M. Hunt <hunt@redhat.com>
* regcache.c (_initialize_regcache): No need to call
build_regcache() at this time; it gets called whenever
the gdbarch changes.
2002-03-20 David O'Brien <obrien@FreeBSD.org>
* sparc-nat.c: Include sys/param.h where possible.
2002-03-20 Daniel Jacobowitz <drow@mvista.com>
Fix PR gdb/422.
* c-lang.c (c_create_fundamental_type): Handle FT_COMPLEX,
FT_DBL_PREC_COMPLEX, and FT_EXT_PREC_COMPLEX.
* dwarf2read.c (read_base_type): Set TYPE_TARGET_TYPE for
complex types.
* stabsread.c (rs6000_builtin_type): Likewise.
(read_sun_floating_type): Likewise.
2002-03-19 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* stabsread.c (read_member_functions): Remove skip code for duplicate
constructor/destructor methods. Use standard parsing for these
methods and just do not chain them to the list of methods after
parsing.
2002-03-19 Alexandre Oliva <aoliva@redhat.com>
* coffread.c: Remove redundant static declarations. Replace
occurrences of `PTR' with `void *'.
* elfread.c, mdebugread.c, minsyms.c, mipsread.c: Likewise.
* top.h (quit_cover): Likewise.
* defs.h (catch_errors): Likewise.
2002-03-18 Andrew Cagney <ac131313@redhat.com>
* defs.h (XMALLOC): Define.
* gdb-events.sh (XMALLOC): Delete macro.
* gdb-events.c, gdb-events.h: Regenerate.
* gdbarch.sh (XMALLOC): Delete macro.
* gdbarch.c: Regenerate.
* serial.c (XMALLOC): Delete macro.
* ui-file.c (XMALLOC): Ditto.
* ser-unix.h (XMALLOC): Ditto.
* sh-tdep.c (XMALLOC): Ditto.
* ui-out.c (XMALLOC): Ditto.
* utils.c (XMALLOC): Ditto.
* i386-tdep.c (XMALLOC): Ditto.
* gdb-events.c (XMALLOC): Ditto.
* d10v-tdep.c (XMALLOC): Ditto.
* cli-out.c (XMALLOC): Ditto.
* cli-out.c, d10v-tdep.c, gdb-events.c: Update copyright.
* gdb-events.sh, i386-tdep.c, ser-unix.h, serial.c: Ditto.
* ui-file.c, ui-out.c: Ditto.
2002-03-18 Andrew Cagney <ac131313@redhat.com>
* command.h (struct cmd_list_element): Add field context.
(set_cmd_context, get_cmd_context): Declare.
* cli/cli-decode.h: Ditto.
* cli/cli-decode.c (get_cmd_context): New function.
(set_cmd_context): New function.
(add_cmd): Initialize context.
Part of fixing PR gdb/145 and PR gdb/146.
2002-03-17 Andrew Cagney <ac131313@redhat.com>
* cli/cli-decode.c (cmd_type): New function.
* command.h (cmd_type): Declare.
* infrun.c (set_schedlock_func): Call function cmd_type.
* kod.c (kod_set_os): Call cmd_type.
* cris-tdep.c (cris_version_update): Use function cmd_type.
(cris_mode_update, cris_abi_update): Ditto.
* command.h: (execute_cmd_post_hook): Declare.
(execute_cmd_pre_hook): Declare.
* cli/cli-script.c (clear_hook_in_cleanup): New function.
(execute_cmd_post_hook, execute_cmd_pre_hook): New
functions. Execute pre/post hook while ensuring that afterwords
hook_in is cleared.
* top.c (execute_command): Use execute_cmd_post_hook, and
execute_cmd_pre_hook to execute pre/post commands.
* infrun.c (normal_stop): Pass stop_command and not pre_hook to
hook_stop_stub.
(hook_stop_stub): Call execute_cmd_pre_hook.
2002-03-17 Andrew Cagney <ac131313@redhat.com>
* kod.c (kod_set_os): Revert previous change. Is called by ``info
set'' and this leads to a core dump. Move xstrdup of
operating_system to after check that it is not NULL.
2002-03-17 Andrew Cagney <ac131313@redhat.com>
* kod.c (kod_set_os): Remove unnecessary check that
``command->type'' is set_cmd.
* valprint.c (set_input_radix): Use input_radix.
(set_output_radix): Use output_radix.
(set_input_radix_1, set_output_radix_1): Add FIXME - bad radix
isn't reverted.
2002-03-16 Andrew Cagney <ac131313@redhat.com>
* value.h (struct value): Delete field ``substring_addr''. Change
aligner fields to force_doublest_align, force_longest_align,
2002-03-17 01:32:54 +00:00
force_core_addr_align and force_pointer_aligh.
* value.h (struct value): Fix typo in above change.
2002-03-16 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* ia64-tdep.c (ia64_gdbarch_init): Call set_gdbarch_frame_args_skip,
to fix internal_error from ``maintenance print architecture''.
2002-03-16 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* cp-valprint.c (cp_is_vtbl_ptr_type): Handle vtbl field type
for gcc versions after gcc-2.8.1.
2002-03-16 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* eval.c (evaluate_subexp_standard): Fix setup of ``this'' pointer
for method resolution. Restore adjustment of ``this'' pointer after
calling value_struct_elt, which was accidentally removed during the
HP merge.
2002-03-15 Andrew Cagney <ac131313@redhat.com>
* eval.c (evaluate_subexp_standard): Pass ``selected_frame'' to
value_of_register.
* findvar.c (value_of_register): Add ``frame'' parameter. Pass to
get_saved_register.
* value.h (value_of_register): Update.
2002-03-14 Richard Henderson <rth@redhat.com>
* configure.in: Detect declaration for canonicalize_file_name.
* utils.c (canonicalize_file_name): Declare, if needed.
(gdb_realpath): Prefer realpath if available and usable.
* config.in, configure: Rebuild.
2002-03-14 Richard Henderson <rth@redhat.com>
* dwarf2read.c (read_array_type): Accept DW_FORM_data8 as
a constant array bound.
* MAINTAINERS: Add myself to write-after-approval.
2002-03-14 Michael Snyder <msnyder@redhat.com>
* symfile.c (syms_from_objfile): Return immediately if no syms.
(symbol_file_add): Return immediately if no syms.
(find_sym_fns): Return immediately if no syms.
2002-03-13 Michal Ludvig <mludvig@suse.cz>
* gdbserver/remote-util.c (remote_open): Print remote-side's
IP address when remote debugging over the network.
2002-03-12 David O'Brien <obrien@FreeBSD.org>
* config/sparc/fbsd.mh: Fix copyright.
* config/sparc/fbsd.mt: Likewise.
2002-03-11 Richard Earnshaw <rearnsha@arm.com>
* MAINTAINERS: Fix typo in name of gdb warnings option.
(x86-64): Fix formating so that this can be parsed by awk.
2002-03-10 Daniel Jacobowitz <drow@mvista.com>
* Makefile.in (defs_h): Add $(INCLUDE_DIR)/gdb/signals.h.
* defs.h: Include "gdb/signals.h".
(enum target_signal): Move to $(INCLUDE_DIR)/gdb/signals.h.
2002-03-10 Michal Ludvig <mludvig@suse.cz>
* x86-64-tdep.h (sys/reg.h, x86_64_regmap): Moved to x86-64-linux-nat.c
* x86-64-linux-nat.c (sys/reg.h, x86_64_regmap): Moved here
from x86-64-tdep.h
2002-03-10 Daniel Jacobowitz <drow@mvista.com>
Don Howard <dhoward@redhat.com>
* mips-tdep.c (ST0_FR): Define.
(mips2_fp_compat): New function, temporarily disabled.
(mips_read_fp_register_single): New function.
(mips_read_fp_register_double): New function.
(mips_print_register): Use them.
(do_fp_register_row): Likewise.
2002-03-09 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Add Jim Ingham and Klee Dienes to ``write after
approval''.
2002-03-08 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* stabsread.c (read_member_functions): Fix is_stub test for
static member functions, improve comment.
2002-03-07 Richard Earnshaw <rearnsha@arm.com>
* remote-rdi.c (myprint): Replace 'PTR' with 'void *'.
(mywrite, mywritec, mypause, myreadc, mygets): Likewise.
(_initialize_remote_rdi): Use add_set_boolean_cmd to register
commands that set boolean values.
(arm_rdi_remove_breakpoint): Rewrite to avoid uninitialized warning.
(arm_rdi_resume): Always initialize PC.
(arm_rdi_open): Don't use rslt as a boolean.
(arm_rdi_create_inferior, arm_rdi_close, arm_rdi_resume)
(arm_rdi_fetch_registers, arm_rdi_store_registers)
(arm_rdi_xfer_memory, arm_rdi_files_info, arm_rdi_kill)
(arm_rdi_insert_breakpoint, arm_rdi_remove_breakpoint): Likewise.
2002-03-06 Alexandre Oliva <aoliva@redhat.com>
* configure.in (gdb_cv_bigtoc): Check for -bbigtoc on AIX.
* configure: Rebuilt.
2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* m68hc11-tdep.c (_initialize_m68hc11_tdep): Don't set tm_print_insn.
(m68hc11_gdbarch_init): But use set_gdbarch_print_insn instead.
2002-03-06 Andrew Cagney <ac131313@redhat.com>
* cli/cli-decode.c (set_cmd_completer): New function.
* command.h (set_cmd_completer): Declare.
* cli/cli-decode.h (set_cmd_completer): Ditto.
* breakpoint.c (_initialize_breakpoint): Use set_cmd_completer.
* cli/cli-cmds.c (init_cli_cmds): Ditto.
* win32-nat.c (_initialize_inftarg): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* proc-api.c (_initialize_proc_api): Ditto.
* hppa-tdep.c (_initialize_hppa_tdep): Ditto.
* source.c (_initialize_source): Ditto.
* exec.c (_initialize_exec): Ditto.
* solib.c (_initialize_solib): Ditto.
* top.c (init_main): Ditto.
* tracepoint.c (_initialize_tracepoint): Ditto.
* symfile.c (_initialize_symfile): Ditto.
* printcmd.c (_initialize_printcmd): Ditto.
* infcmd.c (_initialize_infcmd): Ditto.
* corefile.c (_initialize_core): Ditto.
2002-03-05 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS (Past Maintainers): Add Frank Ch. Eigler.
2002-03-05 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Fix Mac OS X and Objective-C/C++.
2002-03-05 Andrew Cagney <ac131313@redhat.com>
* NEWS: Update headings, 5.2 has branched.
2002-03-04 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c (PTRACE_XFER_TYPE): Change to long.
(num_regs, regmap): Move inside HAVE_LINUX_USRREGS.
(register_addr, REGISTER_RAW_SIZE): Likewise.
(usr_store_inferior_registers): Use PTRACE_XFER_TYPE.
* gdbserver/linux-x86-64-low.c: Remove extra #endif.
2002-03-03 Michal Ludvig <mludvig@suse.cz>
* MAINTAINERS (x86-64): Add myself.
* x86-64-tdep.c (x86_64_push_arguments): Fixed typo naregs->nregs,
changed value_ptr -> struct value *
2002-03-01 David O'Brien <obrien@FreeBSD.org>
* configure.host (sparc64-*-freebsd): Add.
* configure.tgt: Likewise.
* config/sparc/fbsd.mh: New file.
* config/sparc/fbsd.mt: Likewise.
* config/sparc/nm-fbsd.h: Likewise.
* config/sparc/tm-fbsd.h: Likewise.
2002-03-01 Daniel Jacobowitz <drow@mvista.com>
* config/djgpp/fnchange.lst: Add regformats/reg-i386-linux.dat and
regformats/reg-s390x.dat.
2002-03-01 06:19:28 +00:00
2002-03-01 Andrew Cagney <ac131313@redhat.com>
* utils.c: Add FIXME explaining true/false problem.
2002-03-01 03:30:59 +00:00
2002-02-28 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS (Past Maintainers): Add J.T. Conklin.
2002-02-28 Michael Chastain <mec@shout.net>
* MAINTAINERS: Fix typo: gdb.satbs -> gdb.stabs .
2002-02-28 16:58:58 +00:00
2002-02-28 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-s390-low.c: New file.
* regformats/reg-s390.dat: New file.
* regformats/reg-s390x.dat: New file.
* gdbserver/configure.srv: Add S/390.
* gdbserver/Makefile.in: Add S/390.
* configure.tgt: Enable gdbserver for S/390.
2002-02-28 Eli Zaretskii <eliz@is.elta.co.il>
* go32-nat.c (_initialize_go32_nat): Don't use periods in the
first line of the doc string for "info dos", except at the end of
the sentence, since the short help stops at the first period.
2002-02-28 Jason Merrill <jason@redhat.com>
* dwarf2read.c (dwarf_cfi_name): Add new codes.
2002-02-27 Fred Fish <fnf@redhat.com>
* blockframe.c (generic_fix_call_dummy): Fix obvious typo in
comment (dumy -> dummy).
2002-02-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* symtab.c (gdb_mangle_name): Handle fully mangled v3 abi physnames.
2002-02-27 Rodney Brown <rbrown64@csc.com.au>
* utils.c (gdb_realpath): Add pathconf fallback for sco3.2v5.
2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/acconfig.h: New file.
* gdbserver/i387-fp.c: New file.
* gdbserver/i387-fp.h: New file.
* gdbserver/linux-x86-64.c: New file.
* regformats/reg-x86-64.dat: New file.
* configure.tgt: Add x86_64-*-linux* gdbserver support.
* gdbserver/configure.srv: Add x86_64-*-linux* and regset support.
* gdbserver/configure.in: Add support for regsets.
* gdbserver/config.in: Regenerate.
* gdbserver/configure: Regenerate.
* gdbserver/Makefile.in: Likewise. Add $(linux_low_h).
* gdbserver/linux-low.h: New file.
* gdbserver/linux-low.c: Include "linux-low.h". Add support
for regsets.
* gdbserver/linux-arm-low.c: Include "linux-low.h".
* gdbserver/linux-ia64-low.c: Include "linux-low.h".
* gdbserver/linux-m68k-low.c: Include "linux-low.h".
* gdbserver/linux-mips-low.c: Include "linux-low.h".
* gdbserver/linux-ppc-low.c: Include "linux-low.h".
* gdbserver/linux-sh-low.c: Include "linux-low.h".
* gdbserver/linux-i386-low.c: Include "linux-low.h". Include
"i387-fp.h". Add PTRACE_GETREGS and friends.
* gdbserver/regcache.c (supply_register): New function.
(supply_register_by_name): New function.
(collect_register): New function.
(collect_register_by_name): New function.
2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/Makefile.in (INTERNAL_CFLAGS): Remove -DGDBSERVER.
(config.status): Add configure.srv dependency.
(server_h): Add config.h dependency.
2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* regformats/reg-i386-linux.dat: New file, with $orig_eax.
* gdbserver/Makefile.in: Add rules for reg-i386-linux.o.
* gdbserver/configure.srv: Change i386-*-linux* to use
reg-i386-linux.o.
2002-02-27 02:55:13 +00:00
2002-02-26 Andrew Cagney <ac131313@redhat.com>
* x86-64-tdep.c: Re-indent. Update copyright date.
2002-02-26 Andrew Cagney <ac131313@redhat.com>
From Michal Ludvig <mludvig@suse.cz>:
* x86-64-tdep.c (value.h): Delete.
(gdb_assert.h): Include.
(x86_64_register_convert_to_virtual,
x86_64_register_convert_to_raw ): Add check which lets only
floating-point values to be converted.
(value_push): Delete.
(x86_64_push_arguments): Order of arguments pushed on stack fixed.
(i386_gdbarch_init): Number of register_bytes fixed.
2002-02-27 02:45:12 +00:00
2002-02-26 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Add x86-64 target.
2002-02-26 Andrew Cagney <ac131313@redhat.com>
* memattr.c (mem_command): Eliminate ``true'' and ``false''.
* osfsolib.c (solib_map_sections): Ditto.
* irix5-nat.c (solib_map_sections): Ditto.
* corelow.c (gdb_check_format): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* solib.c (solib_map_sections): Ditto.
Fix PR gdb/354.
2002-02-26 Andrew Cagney <ac131313@redhat.com>
* remote.c (_initialize_remote): By default, disable ``e'' and
``E'' step out-of-range packets.
2002-02-26 Andreas Schwab <schwab@suse.de>
* config/m68k/tm-linux.h (FRAME_SAVED_PC): Define as
m68k_linux_frame_saved_pc.
(IN_SIGTRAMP): Define as m68k_linux_in_sigtramp instead of
in_sigtramp.
(SIGCONTEXT_PC_OFFSET): Remove.
* m68klinux-nat.c (m68k_linux_frame_saved_pc,
m68k_linux_sigtramp_saved_pc): New functions.
(IS_SIGTRAMP, IS_RT_SIGTRAMP): Define.
(SIGCONTEXT_PC_OFFSET): Moved here from config/m68k/tm-linux.h.
(UCONTEXT_PC_OFFSET): Define.
(m68k_linux_in_sigtramp): Renamed from in_sigtramp, handle both
non-RT and RT signal trampolines.
2002-02-26 Richard Earnshaw <rearnsha@arm.com>
* config/arm/tm-embed.h (TARGET_UPAGES): Delete.
(TARGET_NBPG, STACK_END_ADDR): Delete
(VARIABLES_INSIDE_BLOCK): Delete.
2002-02-25 Andrew Cagney <ac131313@redhat.com>
* utils.c (perror_with_name): Make string parameter constant.
(print_sys_errmsg): Ditto.
(query): Ditto.
* defs.h (perror_with_name): Update.
(print_sys_errmsg): Update.
(query): Update.
2002-02-25 Daniel Jacobowitz <drow@mvista.com>
From Eliot Dresselhaus <eliot@ayrnetworks.com>:
* gdbserver/linux-mips-low.c (cannot_fetch_register): Fix typo.
2002-02-25 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* rs6000-nat.c (set_host_arch): Do not switch to a new architecture
if it already matches the current architecture from the exec file.
Include arch-utils.h for gdbarch_info_init prototype.
* Makefile.in (rs6000-nat.o): Update dependencies.
2002-02-25 16:09:46 +00:00
2002-02-25 Eli Zaretskii <eliz@is.elta.co.il>
* config/djgpp/djconfig.sh: Set NM=nm and CFLAGS="-g -O2" in the
list of exported variables.
2002-02-24 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/configure.srv: New file.
* gdbserver/configure.in: Use configure.srv instead
of the host/target makefile fragments. Set GDBSERVER_DEPFILES
from it.
* gdbserver/configure: Regenerated.
* gdbserver/terminal.h: New file.
* gdbserver/Makefile.in: Update for configure changes. Remove
more unneeded include paths.
2002-02-24 Andrew Cagney <ac131313@redhat.com>
From wiz at danbala:
* config/sparc/tm-sp64.h: Fix grammar and typos.
Fix PR gdb/287.
2002-02-24 Andrew Cagney <ac131313@redhat.com>
* lin-lwp.c, thread-db.c, defs.h, cris-tdep.c: Replace ``Linux''
2002-02-24 22:14:33 +00:00
with either ``GNU/Linux'' or ``Linux kernel''. Update copyright.
* m68klinux-nat.c, sparc-linux-nat.c, x86-64-linux-nat.c: Ditto.
* x86-64-linux-tdep.c, gregset.h, gdb_wait.h: Ditto.
2002-02-24 22:31:19 +00:00
* ia64-linux-nat.c, infrun.c, linux-proc.c: Ditto.
* proc-service.c, i386-linux-tdep.c, ppc-linux-tdep.c: Ditto.
* s390-tdep.c: Ditto.
2002-02-24 22:56:08 +00:00
* config/nm-linux.h, config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h:
* config/alpha/xm-alphalinux.h, config/i386/nm-linux.h: Ditto.
* config/i386/nm-x86-64.h, config/i386/tm-linux.h: Ditto.
* config/m68k/tm-linux.h, config/mips/nm-linux.h: Ditto.
* config/mips/tm-linux.h, config/mips/xm-linux.h: Ditto.
* config/powerpc/tm-linux.h, config/s390/nm-linux.h: Ditto.
* config/s390/tm-linux.h, config/sh/tm-linux.h: Ditto.
* config/sparc/nm-linux.h, config/sparc/tm-linux.h: Ditto.
* config/sparc/tm-sp64linux.h, config/sparc/xm-linux.h: Ditto.
Fix PR gdb/378.
2002-02-24 01:44:00 +00:00
2002-02-23 Andrew Cagney <ac131313@redhat.com>
2002-02-24 04:31:13 +00:00
* lin-thread.c: Delete file.
* configure.in (gdb_cv_struct_reg_r_gs): Update comment to refer
to gdb_proc_service.h.
* configure: Re-generate.
* ocd.c (ocd_open): Do not try to open the "ocd" device.
* serial.c (serial_open): Delete check for "ocd".
Fix PR gdb/349.
* Makefile.in (linux-thread.o): Delete target.
* linux-thread.c: Delete file.
* config/djgpp/fnchange.lst: Rename bfd/elf32-sh64.c. Tweak other
renamed SH files to be consistent.
2002-02-24 01:44:00 +00:00
* symtab.c (sort_search_symbols): Use xfree.
2002-02-23 Richard Earnshaw <rearnsha@arm.com>
* arm-linux-tdep.c (arm_linux_init_abi): Register
IN_SOLIB_CALL_TRAMPOLINE and SKIP_TRAMPOLINE_CODE
* config/arm/tm-linux.h (IN_SOLIB_CALL_TRAMPOLINE): Replace old
definition with undef, since we don't want the sysvr4 definition.
(SKIP_TRAMPOLINE_CODE): Likewise.
2002-02-23 Andrew Cagney <ac131313@redhat.com>
From 2002-02-22 Alfred M. Szmidt <ams@kemisten.nu>:
* configure.in: (AC_CHECK_FUNCS) Added test for
canonicalize_file_name Regenerated.
* config.in, configure: Regenerated.
* utils.c: (gdb_realpath) If HAVE_CANONICALIZE_FILE_NAME is
defined use canonicalize_file_name.
2002-02-23 Michael Chastain <mec@shout.net>
* MAINTAINERS: Remove Michael Chastain from "paper trail" list.
2002-02-23 20:59:55 +00:00
2002-02-23 Andrew Cagney <ac131313@redhat.com>
* README: Remove references to cygnus.com.
* MAINTAINERS: Change Past Maintainer addresses to ``foo at bar
dot com'' form. Remove references to cygnus.com and sourceware.
2002-02-23 Andrew Cagney <ac131313@redhat.com>
From 2002-02-19 Paul Eggert <eggert@twinsun.com>:
* Makefile.in (VER): Change "head -1" to "sed q", since POSIX
1003.1-2001 no longer allows "head -1".
* gdb/Makefile.in (version.c): Likewise.
* gdb/doc/Makefile.in (GDBvn.texi): Likewise.
* gdb/CONTRIBUTE: Change "diff -c3" to "diff -c", which is
equivalent. POSIX 1003.1-2001 no longer allows "diff -c3".
2002-02-23 Andrew Cagney <ac131313@redhat.com>
* cli/cli-decode.c (cmd_cfunc_eq): New function.
* command.h (cmd_cfunc_eq): Declare.
* cli/cli-decode.h (cmd_cfunc_eq): Ditto.
* cli/cli-cmds.h (is_complete_command): Change parameter to a
``struct cmd_list_element *''.
* cli/cli-cmds.c (is_complete_command): Update. Use
cmd_cfunc_eq.
* top.c (execute_command): Pass the command to
is_complete_command.
* tracepoint.c: Replace function.cfunc with cmd_cfunc_eq.
2002-02-23 Andrew Cagney <ac131313@redhat.com>
From 2002-02-20 Martin Schwidefsky <schwidefsky@de.ibm.com>:
* config/s390/tm-s390.h (GDB_TARGET_IS_ESAME): Use renamed
architecture defines.
* s390-tdep.c (s390_gdbarch_init): Likewise.
2002-02-23 Richard Earnshaw <rearnsha@arm.com>
* arm-linux-tdep.c (arm_linux_extract_return_value): Make static.
(arm_linux_push_arguments): Likewise.
(arm_linux_init_abi): Register them. Also register linux-specific
call_dummy_words.
(find_minsym_and_objfile): Use strcmp, not STREQ.
* config/arm/tm-linux.h (CALL_DUMMY_WORDS): Delete.
(arm_linux_call_dummy_words): Delete declaration.
(EXTRACT_RETURN_VALUE, PUSH_ARGUMENTS): Delete.
(arm_linux_extract_return_value, arm_linux_push_arguments): Delete
declarations.
(LOWEST_PC): Delete.
2002-02-23 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* maint.c (print_section_info): Do not prepend `0x' to filepos
output, it will be handled by local_hex_string_custom.
2002-02-23 Richard Earnshaw <rearnsha@arm.com>
* arm-linux-nat.c (store_newfpe_single): Use regcache_collect.
(store_newfpe_double, store_newfpe_extended, store_fpregister)
(store_register, store_regs, fill_gregset, fill_fpregset): Likewise.
2002-02-22 Jim Blandy <jimb@redhat.com>
Indicate that the bcache functions don't change the strings
they're passed.
* bcache.h (bcache, hash): Add `const' keywords to declarations.
* bcache.c (bcache, hash): Add `const' keywords to definitions.
2002-02-22 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c (child_create_inferior): Fix create flags setting bug.
2002-02-21 Christopher Faylor <cgf@redhat.com>
* win32-nat.c (register_loaded_dll): Just use raw name when we can't
find the complete path to a loaded DLL.
2002-02-21 Fred Fish <fnf@redhat.com>
* dbxread.c (process_one_symbol): When finding an N_FUN symbol
that marks the end of the range of a function, enter a line number
entry that has a line number of zero and a PC offset that matches
the end of the function. This starts a range of PC's for which no
line number information is known.
* symtab.c (find_pc_sect_line): If our best fit is in a range of
PC's for which no line number info is found (line number is zero)
then we didn't find any valid line information.
* symtab.h: Document use of zero line number entry.
2002-02-21 Elena Zannoni <ezannoni@redhat.com>
* ppc-linux-nat.c (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Define.
(have_ptrace_getvrregs): Define for run time checks.
(gdb_vrregset_t): New type for Altivec register handling.
(fetch_register, store_register): Fetch/store altivec register
when needed.
(fetch_altivec_register, store_altivec_register): New functions.
(supply_vrregset, fill_vrregset): New functions.
(fetch_altivec_registers, store_altivec_registers): New functions.
(fetch_ppc_registers, store_ppc_registers): Fetch/store altivec
registers as well.
2002-02-21 Jiri Smid <smid@suse.cz>
* config/i386/x86-64linux.mh (NATDEPFILES): Remove x86-64-nat.o.
2002-02-21 Richard Earnshaw <rearnsha@arm.com>
* Makefile.in (armnbsd-nat.o): Update dependencies.
* armnbsd-nat.c (supply_gregset): New function. Common code to
supply the integer register set.
(supply_fparegset): New function. Similar for FPA registers.
(fetch_regs, fetch_fp_regs): Use them.
(fetch_core_registers): Likewise.
(fetch_elfcore_registers): New function.
(arm_netbsd_elfcore_fns): New core-file type specification.
(_initialize_arm_netbsd_nat): Register it.
2002-02-21 Richard Earnshaw <rearnsha@arm.com>
* armnbsd-nat.c: Include gdbcore.h.
(FETCH_INFERIOR_REGISTERS): Just error if this isn't defined.
(fetch_regs, fetch_fp_regs, store_regs, store_fp_regs): Add explicit
'void' to declaration, to shut up ARI.
(fetch_core_registers): Make static. Rewrite using supply_register.
(arm_netbsd_core_fns): New core-file type specification.
(_initialize_arm_netbsd_nat): New function.
2002-02-21 Christopher Faylor <cgf@redhat.com>
* win32-nat.c (register_loaded_dll): Correctly check for invalid handle
value.
2002-02-20 Christopher Faylor <cgf@redhat.com>
* win32-nat.c (register_loaded_dll): Handle case where FindFirstFile
fails.
2002-02-20 Daniel Jacobowitz <drow@mvista.com>
* jv-exp.y (parse_number): Change type of implicit longs
to builtin_type_uint64.
2002-02-20 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c (mywait): Change argument to waitpid
to be an integer instead of a `union wait'.
2002-02-20 Daniel Jacobowitz <drow@mvista.com>
* mips-linux-nat.c: Call the operating system GNU/Linux.
* mips-linux-tdep.c: Likewise.
* mips-tdep.c: Likewise.
2002-02-20 Daniel Jacobowitz <drow@mvista.com>
Fix PR gdb/265.
* jv-exp.y (parse_number): Handle 64-bit integers.
2002-02-20 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/configure.in: Remove AM_PROC_CC_STDC. Change
AC_STDC_HEADERS to AC_HEADER_STDC.
* gdbserver/configure: Regenerated.
2002-02-20 Richard Earnshaw <rearnsha@arm.com>
* arc-tdep.c (get_longjmp_target): Only compile this function if JB_PC
is defined.
* sparc-tdep.c (get_longjmp_target): Likewise.
2002-02-20 Richard Earnshaw <rearnsha@arm.com>
* News: Add news about ARM and Multi-arch. Mention the new target
arm*-*-netbsd*.
2002-02-19 Jim Blandy <jimb@redhat.com>
* stabsread.c (error_type_complaint): Improve error message.
2002-02-19 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/README: Update documentation.
* gdbserver/configure.in: Update configury to match documentation.
* gdbserver/Makefile.in: Likewise.
* gdbserver/configure: Regenerated.
* gdbserver/aclocal.m4: New file, generated by aclocal.
* gdbserver/config.in: New file, generated by autoheader.
2002-02-19 Richard Earnshaw <rearnsha@arm.com>
* config/djgpp/fnchange.lst: Add change rules for armnbsd-tdep.c and
armnbsd-nat.c.
2002-02-19 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.h (enum arm_float_model): New enum.
(struct gdbarch_tdep): Add fp_model.
* arm-tdep.c (arm_gdbarch_init): Set fp_model in tdep. Defer setting
up floating-point conversions until we know the floating-point model
in use by the inferior. Don't complain about being unable to
determine the ABI of the inferior when we don't have one.
(arm_extract_return_value): Support different floating-point models.
(arm_store_return_value): Likewise.
* armnbsd-tdep.c (arm_netbsd_aout_init_abi): Set fp_model in tdep to
ARM_FLOAT_SOFT.
(arm_netbsd_elf_init_abi): Set fp_model to ARM_FLOAT_SOFT_VFP.
2002-02-19 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* i386-tdep.c (i386_gdbarch_init): Eliminate incorrect use
of ``current_gdbarch''.
2002-02-19 Richard Earnshaw <rearnsha@arm.com>
* armnbsd-nat.c : ANSIfy all function declarations.
(fetch_register, fetch_regs, fetch_fp_register, fetch_fp_regs): New.
(fetch_inferior_registers): Re-implement in terms of above.
(store_register, store_regs, store_fp_register, store_fp_regs): New.
(store_inferior_registers): Re-implement in terms of above.
2002-02-19 Richard Earnshaw <rearnsha@arm.com>
* arm-linux-nat.c: Linux -> GNU/Linux when not talking about the
kernel.
* arm-linux-tdep.c: Likewise.
* config/arm/tm-linux.h: Likewise.
2002-02-19 Richard Earnshaw <rearnsha@arm.com>
* configure.tgt (arm*-*-netbsd*): This variant is now fully multi-arch.
* config/arm/nbsd.mt (TM_FILE): Delete.
* config/arm/tm-nbsd.h: Delete.
2002-02-19 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_gdbarch_init): Initialize TARGET_CHAR_SIGNED.
Initialize CALL_DUMMY_LENGTH.
2002-02-19 Richard Earnshaw <rearnsha@arm.com>
* armnbsd-tdep.c (arm_netbsd_aout_in_solib_call_trampoline): New
function.
(arm_netbsd_aout_init_abi): Initialize IN_SOLIB_CALL_TRAMPOLINE.
* config/arm/tm-nbsd.h: Don't include config/tm-nbsd.h, it only
defines one thing and that is incorrect for this port.
(IN_SOLIB_CALL_TRAMPOLINE): Delete.
2002-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
* go32-nat.c: add i386-tdep.h include to import FP_REGNUM_P macro.
2002-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c (display_selector): New function. Displays information
about the information returned by GetThreadSelectorEntry API function.
(display_selectors): New function. Displays the infomation of
the selector given as argument, or of CS, DS ans FS selectors
if no argument is given.
( _initialize_inftarg): Add "w32" as info prefix command.
Add "info w32 selector" as command calling display_selectors.
2002-02-19 Pierre Muller <muller@ics.u-strasbg.fr>
* i386-tdep.c (get_longjmp_target): Fix compilation failure
by setting dummy values to JB_PC and JB_ELEMENT_SIZE
if not defined.
2002-02-18 Richard Earnshaw <rearnsha@arm.com>
* config/arm/nbsd.mt (TDEPFILES): Add solib-sunos.o.
2002-02-18 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_set_call_dummy_breakpoint_offset): New function.
(arm_fix_call_dummy): Call it.
(arm_call_dummy_breakpoint_offset): Delete.
(arm_gdbarch_init): Initialize call_dummy_breakpoint_offset.
* config/arm/tm-arm.h (CALL_DUMMY_BREAKPOINT_OFFSET): Delete.
2002-02-18 Andrew Cagney <ac131313@redhat.com>
* gdbarch.sh (FRAME_CHAIN_VALID): Only require at level 2.
Default to func_frame_chain_valid.
* gdbarch.h, gdbarch.c: Re-generate.
* frame.h (FRAME_CHAIN_VALID): Delete definition.
2002-02-18 Elena Zannoni <ezannoni@redhat.com>
* ppc-linux-nat.c: Update copyright.
(fetch_register, store_register): Add tid parameter, don't compute
tid here.
(fetch_ppc_registers, store_ppc_registers): Add tid
parameter. Pass it along to callees.
(fetch_inferior_registers, store_inferior_registers): Compute tid
here, and pass it to calleed functions.
(fill_gregset, supply_fpregset): Clean up formatting.
2002-02-18 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_gdbarch_init): Initialize coerce_float_to_double.
* config/arm/tm-arm.h (COERCE_FLOAT_TO_DOUBLE): Delete.
2002-02-18 Richard Earnshaw <rearnsha@arm.com>
* gdbarch.sh (GET_LONGJMP_TARGET): Add rule.
* gdbarch.c gdbarch.h: Regenerate.
* breakpoint.c (create_longjmp_breakpoint): Always compile this
function.
(breakpoint_reset): Test GET_LONGJMP_TARGET_P().
* infrun.c (GET_LONGJMP_TARGET): Delete default definition.
(handle_inferior_event): Test GET_LONGJMP_TARGET_P().
* arm-tdep.h (struct gdbarch_tdep): Add jb_pc and jb_elt_size fields.
* arm-tdep.c (arm_get_longjmp_target): New function.
(arm_gdbarch_init): Initialize jb_pc to -1. If ABI handler changes
this to a positive value register arm_get_longjmp_target as the
longjmp handler.
* arm-linux-tdep.c (arm_get_longjmp_target): Delete.
(arm_linux_init_abi): Set up longjmp description in tdep.
* armnbsd-nat.c (get_longjmp_target): Delete.
* armnbsd-tdep.c (arm_netbsd_init_abi_common): Set up longjmp
description in tdep.
* config/arm/tm-nbsd.h (JB_ELEMENT_SIZE, JB_PC): Delete.
(get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
* config/arm/tm-linux.h (arm_get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
2002-02-17 Kevin Buettner <kevinb@redhat.com>
From Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
* ia64-tdep.c (ia64_gdbarch_init): Eliminate incorrect use
of ``current_gdbarch''.
2002-02-17 Tom Tromey <tromey@redhat.com>
* cli/cli-cmds.c (compare_strings): New function.
(complete_command): Only print each unique item once.
* completer.h (complete_line): Declare.
* completer.c (complete_line): New function.
(line_completion_function): Use it.
2002-02-16 Andrew Cagney <ac131313@redhat.com>
* gdbarch.sh (TARGET_LONG_DOUBLE_BIT): Default to 64.
* gdbarch.h, gdbarch.c: Re-generate.
2002-02-16 Daniel Jacobowitz <drow@mvista.com>
* valarith.c (value_x_unop): Fix decrement; support post-decrement.
2002-02-16 Daniel Jacobowitz <drow@mvista.com>
From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>:
* valops.c (value_arg_coerce): Don't take the address of a reference
to convert an argument to a reference.
2002-02-15 Christopher Faylor <cgf@redhat.com>
* win32-nat.c (get_image_name): New function.
(handle_load_dll): Use get_image_name function.
(get_child_debug_event): Avoid registering debug events until possibly
execed process is started.
(child_create_inferior): Allow invocation via shell so that command
line redirection, etc. works ok.
(_initialize_inftarg): Add new command: "set shell" to control whether
a shell is used to start a process.
2002-02-15 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-mips-low.c (cannot_fetch_register): Use find_regno
instead of find_register_by_number.
(cannot_store_register): Likewise.
2002-02-14 Pierre Muller <muller@ics.u-strasbg.fr>
* dwarf2read.c: Replace fprintf (stderr, ...) by
fprintf_unfiltered (gdb_stderr, ...).
2002-02-15 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/gdbserver.1: Document --attach.
2002-02-15 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.h (struct gdbarch_tdep): Add fields for breakpoint
descriptions.
* arm-tdep.c (arm_default_arm_le_breakpoint)
(arm_default_arm_be_breakpoint, arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): New. Initialize them from
traditional breakpoint defines.
(arm_breakpoint_from_pc): Use new gdbarch_tdep entries.
(arm_gdbarch_init): Initialize new breakpoint variables.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint): New.
(arm_linux_init_abi): Initialize linux-specific breakpoint.
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint): New.
(arm_netbsd_aout_init_abi, arm_netbsd_elf_init_abi): Split common
code out to ...
(arm_netbsd_init_abi_common): ... here; new function.
* config/arm/tm-arm.h (ARM_LE_BREAKPOINT, ARM_BE_BREAKPOINT)
(THUMB_LE_BREAKPOINT, THUMB_BE_BREAKPOINT): Delete.
* config/arm/tm-linux.h (ARM_LE_BREAKPOINT): Delete.
* config/arm/tm-nbsd.h (ARM_LE_BREAKPOINT): Delete.
2002-02-15 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.h (enum arm_abi): New enum.
(struct gdbarch_tdep): New structure.
(LOWEST_PC): Provide a default.
(arm_gdbarch_register_os_abi): Declare new function.
* arm-tdep.c (arm_abi_names): New array.
(process_note_abi_tag_sections): New function.
(get_elfosabi): New function.
(arm_gdbarch_register_os_abi): New function.
(arm_gdbarch_init): Try to determine the ABI of the inferior. If
support for that ABI has been built in, then call the appropriate
configuration routine. Use gdbarch_num_regs() to get the number
of registers.
(arm_dump_tdep): New function.
(arm_init_abi_eabi_v1, arm_init_abi_eabi_v2, arm_init_abi_apcs): New
place-holder functions.
(_initialize_arm_tdep): Register them.
* config/arm/tm-arm.h (LOWEST_PC): Delete.
* armnbsd-tdep.c: New file.
* Makefile.in (armnbsd-tdep.o): Add dependencies.
* config/arm/nbsd.mt (TDEPFILES): Add it.
* config/arm/tm-nbsd.h (LOWEST_PC): Delete.
* armnbsd-nat.c: Include regcache.h.
* Makefile.in (armnbsd-nat.o): Update dependency list.
* arm-tdep.c (arm_get_next_pc): Use printf_filtered for error message.
2002-02-14 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/Makefile.in: Fix typos in target rules.
2002-02-14 Daniel Jacobowitz <drow@mvista.com>
Fix part of PR gdb/267.
* linespec.c (find_methods): Handle constructors specially for now.
2002-02-14 Corinna Vinschen <vinschen@redhat.com>
* arm-tdep.c (arm_push_arguments): Eliminate special float type
handling.
* config/arm/tm-arm.h (COERCE_FLOAT_TO_DOUBLE): Define to call
standard_coerce_float_to_double().
2002-02-14 Christopher Faylor <cgf@redhat.com>
* config/i386/xm-cygwin.h: Revert inadvertent reinclusion of
GDBINIT_FILENAME.
2002-02-14 Elena Zannoni <ezannoni@redhat.com>
* rs6000-tdep.c (rs6000_gdbarch_init): Don't call
find_variant_by_name, because it confuses the multiarch
framework. Return NULL if there isn't an architecture with the
user supplied name, instead of forcing a different one without
recording the change with the multiarch machinery.
(find_variant_by_name): Delete.
2002-02-14 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* config/i386/i386sol2.mh (NATDEPFILES): Add i387-nat.o, needed by
i386v4-nat.o now. Add gcore.o, Solaris x86 supports gcore.
2002-02-13 Martin M. Hunt <hunt@redhat.com>
* stack.c (print_frame_info_base): When calling
print_frame_info_listing_hook, set current_source_symtab.
2002-02-14 Daniel Jacobowitz <drow@mvista.com> * gdbserver/Makefile.in: Add regformats directory to INCLUDE_CFLAGS, and remove unused $(INCLUDE_DIR). Add regcache.c to OBS. Add generated register protocol files to clean target. Update dependencies for new objects, obsolete old target code. * gdbserver/linux-low.c: Remove all platform-specific code to new files. Remove various dead code. Update to use regcache functionality. * gdbserver/remote-utils.c (fromhex): Add return statement to quiet warning. (putpkt): Dynamically allocate buf2 because PBUFSIZ is no longer constant. (input_interrupt): Add integer parameter to match prototype of a signal handler. (outreg): Use register_data (). (prepare_resume_reply): Use gdbserver_expedite_regs. * gdbserver/server.c (main): Dynamically allocate own_buf because PBUFSIZ is no longer constant. Use registers_to_string () and registers_from_string (). * gdbserver/server.h: No longer include "defs.h". Add prototypes for error (), fatal (), and warning (). Update definition of PBUFSIZ to use regcache functionality. Add include guard. * gdbserver/utils.c (fatal): Add missing ``const''. (warning): New function. * regformats/regdat.sh: Include "regcache.h" in generated files. Provide init_registers () function. * regformats/regdef.h: Add prototype for set_register_cache (). Add include guard. * gdbserver/linux-arm-low.c: New file. * gdbserver/linux-i386-low.c: New file. * gdbserver/linux-ia64-low.c: New file. * gdbserver/linux-m68k-low.c: New file. * gdbserver/linux-mips-low.c: New file. * gdbserver/linux-ppc-low.c: New file. * gdbserver/linux-sh-low.c: New file. * gdbserver/regcache.c: New file. * gdbserver/regcache.h: New file. * gdbserver/low-linux.c: Removed obsolete file.
2002-02-14 06:21:24 +00:00
2002-02-14 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/Makefile.in: Add regformats directory to INCLUDE_CFLAGS,
and remove unused $(INCLUDE_DIR).
Add regcache.c to OBS.
Add generated register protocol files to clean target.
Update dependencies for new objects, obsolete old target code.
* gdbserver/linux-low.c: Remove all platform-specific code to
new files. Remove various dead code. Update to use regcache
functionality.
* gdbserver/remote-utils.c (fromhex): Add return statement
to quiet warning.
(putpkt): Dynamically allocate buf2 because PBUFSIZ is no longer
constant.
(input_interrupt): Add integer parameter to match prototype
of a signal handler.
(outreg): Use register_data ().
(prepare_resume_reply): Use gdbserver_expedite_regs.
* gdbserver/server.c (main): Dynamically allocate own_buf because
PBUFSIZ is no longer constant. Use registers_to_string () and
registers_from_string ().
* gdbserver/server.h: No longer include "defs.h". Add prototypes
for error (), fatal (), and warning (). Update definition of
PBUFSIZ to use regcache functionality. Add include guard.
* gdbserver/utils.c (fatal): Add missing ``const''.
(warning): New function.
* regformats/regdat.sh: Include "regcache.h" in generated files.
Provide init_registers () function.
* regformats/regdef.h: Add prototype for set_register_cache ().
Add include guard.
* gdbserver/linux-arm-low.c: New file.
* gdbserver/linux-i386-low.c: New file.
* gdbserver/linux-ia64-low.c: New file.
* gdbserver/linux-m68k-low.c: New file.
* gdbserver/linux-mips-low.c: New file.
* gdbserver/linux-ppc-low.c: New file.
* gdbserver/linux-sh-low.c: New file.
* gdbserver/regcache.c: New file.
* gdbserver/regcache.h: New file.
* gdbserver/low-linux.c: Removed obsolete file.
2002-02-14 Daniel Jacobowitz <drow@mvista.com>
* config/arm/linux.mt: Update GDBSERVER_DEPFILES.
* config/i386/linux.mt: Likewise.
* config/ia64/linux.mt: Likewise.
* config/m68k/linux.mh: Likewise.
* config/powerpc/linux.mh: Likewise.
* config/mips/linux.mt: Likewise.
* config/sh/linux.mt: Add GDBSERVER_DEPFILES.
* config/i386/i386lynx.mh: Mark gdbserver variables
as (currently) obsolete for this target.
* config/i386/nbsd.mt: Likewise.
* config/i386/nbsdelf.mt: Likewise.
* config/m32r/m32r.mt: Likewise.
* config/m68k/m68klynx.mh: Likewise.
* config/m68k/nbsd.mt: Likewise.
* config/m68k/sun3os4.mh: Likewise.
* config/mips/vr5000.mt: Likewise.
* config/ns32k/nbsd.mt: Likewise.
* config/pa/hppabsd.mh: Likewise.
* config/pa/hppaosf.mh: Likewise.
* config/powerpc/nbsd.mt: Likewise.
* config/rs6000/rs6000lynx.mh: Likewise.
* config/s390/s390.mt: Likewise.
* config/s390/s390x.mt: Likewise.
* config/sparc/sparclynx.mh: Likewise.
* config/sparc/sun4os4.mh: Likewise.
* config/i386/x86-64linux.mt: Likewise.
* config/sparc/linux.mh: Likewise.
2002-02-14 Daniel Jacobowitz <drow@mvista.com>
* configure.tgt: Configure gdbserver only for known working
targets. Set ${build_gdbserver} instead of modifying ${configdirs}.
* configure.in: Check ${build_gdbserver}. Put gdbserver/ into
SUBDIRS if it is configured. Update comment for ${nativefile}.
* configure: Regenerated.
2002-02-13 Michael Snyder <msnyder@redhat.com>
* gcore.c (gcore_command): Use gcore_default_target instead of NULL.
(default_gcore_mach): Just return 0, work around a problem in bfd.
(default_gcore_target): OK to return NULL if exec_bfd is null.
(make_mem_sec): Use a cast, avoid a warning.
* procfs.c (find_memory_regions_callback): Use a cast instead of
calling host_pointer_to_address (which complains if
sizeof (host pointer) != sizeof (target pointer)).
(procfs_make_note_section): Avoid overflow in psargs string.
* procfs.c (procfs_make_note_section): Make the default
implementation return an error.
2002-02-13 Rodney Brown <rbrown64@csc.com.au>
* procfs.c (procfs_make_note_section): Provide a default definition
(for alpha-dec-osf4.0f). Fix typos.
2002-02-13 Elena Zannoni <ezannoni@redhat.com>
* linux-proc.c: Add include of regcache.h.
* Makefile.in (linux-proc.o): Add dependency on regcache.h.
2002-02-13 Andrew Cagney <ac131313@redhat.com>
From 2002-01-18 Greg McGary <greg@mcgary.org>:
* memattr.c (create_mem_region): Disallow useless empty region.
Regions are half-open intervals, so allow [A..B) [B..C) as
non-overlapping.
2002-02-13 Michael Chastain <mec@shout.net>
* defs.h: Kill CONST_PTR.
* c-lang.h (c_builtin_types): Change CONST_PTR to simple "const".
* c-lang.c (c_builtin_types): Likewise.
* ch-lang.c (ch_builtin_types): Likewise.
* f-lang.c (f_builtin_types): Likewise.
* language.c (unknown_builtin_types): Likewise.
* m2-lang.c (m2_builtin_types): Likewise.
* p-lang.c (pascal_builtin_types): Likewise.
* scm-lang.c (c_builtin_types): Likewise.
2002-02-13 Keith Seitz <keiths@redhat.com>
* arm-tdep.h (arm_get_next_pc): Add declaration.
2002-02-13 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_use_struct_convention): Make static. Move to be
with other related struct-returning functions.
(arm_extract_struct_value_address): New function.
(arm_gdbarch_init): Initialize the above in multi-arch vector. Also
initialize float_format, double_format and long_double_format as
appropriate to the endianness of the target.
* config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Delete.
(arm_use_struct_convention): Delete declaration.
(USE_STRUCT_CONVENTION, EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
2002-02-13 Keith Seitz <keiths@redhat.com>
* defs.h (core_addr_to_string_nz): New function.
2002-02-13 Mark Kettenis <kettenis@gnu.org>
Apply missing bits of 2002-01-15 patch.
* i386v4-nat.c (supply_fpregset): Use i387_supply_fsave.
(fill_fpregset): Use i387_fill_fsave.
2002-02-12 Keith Seitz <keiths@redhat.com>
* utils.c (core_addr_to_string): Use phex instead of phex_nz.
(core_addr_to_string_nz): New function.
2002-02-11 Richard Earnshaw <rearnsha@arm.com>
* arm-linux-nat.c: Really include arm-tdep.h.
* config/arm/tm-linux.h (struct type, struct value): Declare.
2002-02-11 Michael Snyder <msnyder@redhat.com>
* procfs.c: Include elf-bfd.h (for elfcore_write functions).
(gcore section): Ifdef for Solaris and Unixware only.
(procfs_do_thread_registers): Unixware needs one lwpstatus
per thread (not one prstatus or pstatus).
(procfs_make_note_section): Iterate only over kernel threads (lwps),
not over all gdb threads. For unixware, call elfcore_write_pstatus
once before iterating over threads.
* arm-tdep.h: New file. * arm-tdep.c: Include arm-tdep.h. (arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call) (arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy) (arm_print_float_info, arm_register_type, convert_to_extended) (arm_elf_make_msymbols_special, arm_coff_make_msymbol_special) (arm_extract_return_value, arm_register_name): Make static. (arm_software_single_step): Similarly. Fix types in declaration. (arm_register_byte, arm_register_raw_size, arm_register_virtual_size) (arm_store_return_value, arm_store_struct_return): New functions. (arm_gdbarch_init): Register the above functions. Also register call_dummy_start_offset, sizeof_call_dummy_words, function_start_offset, inner_than, decr_pc_after_break, fp_regnum, sp_regnum, pc_regnum, register_bytes, num_regs, max_register_raw_size, max_register_virtual_size, register_size. Set up prologue_cache.saved_regs here, rather than ... (_initialize_arm_tdep): ... here. * config/arm/tm-arm.h (struct type, struct value): Delete forward declarations. (arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call) (arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy) (arm_print_float_info, arm_register_type, convert_to_extended) (arm_elf_make_msymbols_special, arm_coff_make_msymbol_special) (arm_extract_return_value, arm_register_name): Delete declarations. (SMASH_TEXT_ADDRESS, ADDR_BITS_REMOVE, FUNCTION_START_OFFSET) (SKIP_PROLOGUE, SAVED_PC_AFTER_CALL, INNER_THAN, BREAKPOINT_FROM_PC) (DECR_PC_AFTER_BREAK, PRINT_FLOAT_INFO, REGISTER_SIZE, NUM_REGS) (REGISTER_NAME, REGISTER_BYTES, REGISTER_BYTE, REGISTER_RAW_SIZE) (REGISTER_VIRTUAL_SIZE, MAX_REGISTER_RAW_SIZE) (MAX_REGISTER_VIRTUAL_SIZE, REGISTER_VIRTUAL_TYPE, STORE_STRUCT_RETURN) (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, CALL_DUMMY_WORDS) (SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_START_OFFSET, FIX_CALL_DUMMY) (SOFTWARE_SINGLE_STEP_P, SOFTWARE_SINGLE_STEP) (ELF_MAKE_MSYMBOL_SPECIAL, COFF_MAKE_MSYMBOL_SPECIAL) Delete. (arm_pc_is_thumb, arm_pc_is_thumb_dummy, thumb_get_next_pc) (arm_get_next_pc): No-longer static -- these are needed by the RDI interface. * arm-linux-nat.c arm-linux-tdep.c armnbsd-nat.c: Include arm-tdep.h. * remote-rdi.c remote-rdp.c: Likewise. * Makefile.in (arm-linux-nat.o, arm-linux-tdep.o arm-tdep.o) (armnbsd-nat.o, remote-rdi.o, remote_rdp.o): Update dependencies. * config/arm/tm-nbsd.h (SOFTWARE_SINGLE_STEP_P): Delete bogus definition. * arm-tdep.h (ARM_A1_REGNUM, ARM_A4_REGNUM, ARM_AP_REGNUM) (ARM_SP_REGNUM, ARM_LR_REGNUM, ARM_PC_REGNUM, ARM_F0_REGNUM) (ARM_F3_REGNUM, ARM_F7_REGNUM, ARM_FPS_REGNUM, ARM_PS_REGNUM): Renamed from non-ARM_ prefixed definitions. * arm-tdep.c armnbsd-nat.c arm-linux-nat.c arm-linux-tdep.c: Update all uses of above. * remote-rdi.c remote-rdp.c: Likewise. * arm-linux-nat.c (ARM_CPSR_REGNUM): Renamed from CPSR_REGNUM.
2002-02-11 18:34:12 +00:00
2002-02-11 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.h: New file.
* arm-tdep.c: Include arm-tdep.h.
(arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call)
(arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy)
(arm_print_float_info, arm_register_type, convert_to_extended)
(arm_elf_make_msymbols_special, arm_coff_make_msymbol_special)
(arm_extract_return_value, arm_register_name): Make static.
(arm_software_single_step): Similarly. Fix types in declaration.
(arm_register_byte, arm_register_raw_size, arm_register_virtual_size)
(arm_store_return_value, arm_store_struct_return): New functions.
(arm_gdbarch_init): Register the above functions. Also register
call_dummy_start_offset, sizeof_call_dummy_words,
function_start_offset, inner_than, decr_pc_after_break, fp_regnum,
sp_regnum, pc_regnum, register_bytes, num_regs, max_register_raw_size,
max_register_virtual_size, register_size. Set up
* arm-tdep.h: New file. * arm-tdep.c: Include arm-tdep.h. (arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call) (arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy) (arm_print_float_info, arm_register_type, convert_to_extended) (arm_elf_make_msymbols_special, arm_coff_make_msymbol_special) (arm_extract_return_value, arm_register_name): Make static. (arm_software_single_step): Similarly. Fix types in declaration. (arm_register_byte, arm_register_raw_size, arm_register_virtual_size) (arm_store_return_value, arm_store_struct_return): New functions. (arm_gdbarch_init): Register the above functions. Also register call_dummy_start_offset, sizeof_call_dummy_words, function_start_offset, inner_than, decr_pc_after_break, fp_regnum, sp_regnum, pc_regnum, register_bytes, num_regs, max_register_raw_size, max_register_virtual_size, register_size. Set up prologue_cache.saved_regs here, rather than ... (_initialize_arm_tdep): ... here. * config/arm/tm-arm.h (struct type, struct value): Delete forward declarations. (arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call) (arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy) (arm_print_float_info, arm_register_type, convert_to_extended) (arm_elf_make_msymbols_special, arm_coff_make_msymbol_special) (arm_extract_return_value, arm_register_name): Delete declarations. (SMASH_TEXT_ADDRESS, ADDR_BITS_REMOVE, FUNCTION_START_OFFSET) (SKIP_PROLOGUE, SAVED_PC_AFTER_CALL, INNER_THAN, BREAKPOINT_FROM_PC) (DECR_PC_AFTER_BREAK, PRINT_FLOAT_INFO, REGISTER_SIZE, NUM_REGS) (REGISTER_NAME, REGISTER_BYTES, REGISTER_BYTE, REGISTER_RAW_SIZE) (REGISTER_VIRTUAL_SIZE, MAX_REGISTER_RAW_SIZE) (MAX_REGISTER_VIRTUAL_SIZE, REGISTER_VIRTUAL_TYPE, STORE_STRUCT_RETURN) (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, CALL_DUMMY_WORDS) (SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_START_OFFSET, FIX_CALL_DUMMY) (SOFTWARE_SINGLE_STEP_P, SOFTWARE_SINGLE_STEP) (ELF_MAKE_MSYMBOL_SPECIAL, COFF_MAKE_MSYMBOL_SPECIAL) Delete. (arm_pc_is_thumb, arm_pc_is_thumb_dummy, thumb_get_next_pc) (arm_get_next_pc): No-longer static -- these are needed by the RDI interface. * arm-linux-nat.c arm-linux-tdep.c armnbsd-nat.c: Include arm-tdep.h. * remote-rdi.c remote-rdp.c: Likewise. * Makefile.in (arm-linux-nat.o, arm-linux-tdep.o arm-tdep.o) (armnbsd-nat.o, remote-rdi.o, remote_rdp.o): Update dependencies. * config/arm/tm-nbsd.h (SOFTWARE_SINGLE_STEP_P): Delete bogus definition. * arm-tdep.h (ARM_A1_REGNUM, ARM_A4_REGNUM, ARM_AP_REGNUM) (ARM_SP_REGNUM, ARM_LR_REGNUM, ARM_PC_REGNUM, ARM_F0_REGNUM) (ARM_F3_REGNUM, ARM_F7_REGNUM, ARM_FPS_REGNUM, ARM_PS_REGNUM): Renamed from non-ARM_ prefixed definitions. * arm-tdep.c armnbsd-nat.c arm-linux-nat.c arm-linux-tdep.c: Update all uses of above. * remote-rdi.c remote-rdp.c: Likewise. * arm-linux-nat.c (ARM_CPSR_REGNUM): Renamed from CPSR_REGNUM.
2002-02-11 18:34:12 +00:00
prologue_cache.saved_regs here, rather than ...
(_initialize_arm_tdep): ... here.
* config/arm/tm-arm.h (struct type, struct value): Delete forward
declarations.
(arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call)
(arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy)
(arm_print_float_info, arm_register_type, convert_to_extended)
(arm_elf_make_msymbols_special, arm_coff_make_msymbol_special)
(arm_extract_return_value, arm_register_name): Delete declarations.
(SMASH_TEXT_ADDRESS, ADDR_BITS_REMOVE, FUNCTION_START_OFFSET)
(SKIP_PROLOGUE, SAVED_PC_AFTER_CALL, INNER_THAN, BREAKPOINT_FROM_PC)
(DECR_PC_AFTER_BREAK, PRINT_FLOAT_INFO, REGISTER_SIZE, NUM_REGS)
(REGISTER_NAME, REGISTER_BYTES, REGISTER_BYTE, REGISTER_RAW_SIZE)
(REGISTER_VIRTUAL_SIZE, MAX_REGISTER_RAW_SIZE)
(MAX_REGISTER_VIRTUAL_SIZE, REGISTER_VIRTUAL_TYPE, STORE_STRUCT_RETURN)
(EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, CALL_DUMMY_WORDS)
(SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_START_OFFSET, FIX_CALL_DUMMY)
(SOFTWARE_SINGLE_STEP_P, SOFTWARE_SINGLE_STEP)
(ELF_MAKE_MSYMBOL_SPECIAL, COFF_MAKE_MSYMBOL_SPECIAL) Delete.
(arm_pc_is_thumb, arm_pc_is_thumb_dummy, thumb_get_next_pc)
(arm_get_next_pc): No-longer static -- these are needed by the RDI
interface.
* arm-linux-nat.c arm-linux-tdep.c armnbsd-nat.c: Include arm-tdep.h.
* remote-rdi.c remote-rdp.c: Likewise.
* Makefile.in (arm-linux-nat.o, arm-linux-tdep.o arm-tdep.o)
(armnbsd-nat.o, remote-rdi.o, remote_rdp.o): Update dependencies.
* config/arm/tm-nbsd.h (SOFTWARE_SINGLE_STEP_P): Delete bogus
definition.
* arm-tdep.h (ARM_A1_REGNUM, ARM_A4_REGNUM, ARM_AP_REGNUM)
(ARM_SP_REGNUM, ARM_LR_REGNUM, ARM_PC_REGNUM, ARM_F0_REGNUM)
(ARM_F3_REGNUM, ARM_F7_REGNUM, ARM_FPS_REGNUM, ARM_PS_REGNUM): Renamed
from non-ARM_ prefixed definitions.
* arm-tdep.c armnbsd-nat.c arm-linux-nat.c arm-linux-tdep.c: Update
all uses of above.
* remote-rdi.c remote-rdp.c: Likewise.
* arm-linux-nat.c (ARM_CPSR_REGNUM): Renamed from CPSR_REGNUM.
2002-02-11 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_frameless_function_invocation)
(arm_frame_args_address, arm_frame_locals_address, arm_frame_num_args)
(arm_frame_chain, arm_init_extra_frame_info, arm_frame_saved_pc)
(arm_read_fp, arm_frame_init_saved_regs, arm_push_dummy_frame)
(arm_pop_frame, arm_get_next_pc): Make static.
(arm_gdbarch_init): Register above in gdbarch structure.
(arm_read_fp): Renamed from arm_target_read_fp.
(arm_pc_is_thumb, arm_pc_is_thumb_dummy): Make static.
* config/arm/tm-arm.h (arm_frameless_function_invocation)
(arm_frame_args_address, arm_frame_locals_address, arm_frame_num_args)
(arm_frame_chain, arm_init_extra_frame_info, arm_frame_saved_pc)
(arm_target_read_fp, arm_frame_init_saved_regs, arm_push_dummy_frame)
(arm_pop_frame, arm_get_next_pc, arm_pc_is_thumb)
(arm_pc_is_thumb_dummy): Delete declarations.
2002-02-11 12:48:20 +00:00
(INIT_EXTRA_FRAME_INFO, TARGET_READ_FP, FRAME_CHAIN)
(FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, FRAME_ARGS_ADDRESS)
(FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS, FRAME_ARGS_SKIP)
(FRAME_INIT_SAVED_REGS, PUSH_DUMMY_FRAME, POP_FRAME): Delete.
2002-02-10 Daniel Jacobowitz <drow@mvista.com>
* symtab.c (compare_search_syms): New function.
(sort_search_symbols): New function.
(search_symbols): Sort symbols after searching rather than
before.
2002-02-10 17:34:05 +00:00
2002-02-10 Andrew Cagney <ac131313@redhat.com>
* NEWS: Linux -> GNU/Linux.
2002-02-10 Andrew Cagney <ac131313@redhat.com>
* gdbarch.sh: For for level one methods, disallow a definition
when partially multi-arched. Add comments explaining rationale.
* gdbarch.h: Re-generate.
2002-02-10 Andrew Cagney <ac131313@redhat.com>
* gdbarch.sh (EXTRA_STACK_ALIGNMENT_NEEDED): Don't require when
multi-arch partial.
2002-02-10 Andrew Cagney <ac131313@redhat.com>
* gdbarch.sh: Map LEVEL onto a symbolic GT_LEVEL. Exit on bad
field. Use diff -u.
* gdbarch.c: Re-generate.
2002-02-10 Andrew Cagney <ac131313@redhat.com>
* config/mips/tm-mips.h (CALL_DUMMY_LOCATION): Delete.
* gdbarch.sh (PUSH_RETURN_ADDRESS): Don't require when multi-arch
partial.
2002-02-10 Andrew Cagney <ac131313@redhat.com>
* gdbarch.sh (REGISTER_CONVERTIBLE): Don't require when
multi-arch partial.
(PUSH_ARGUMENTS): Switch to using predefault.
* gdbarch.c: Regenerate.
2002-02-10 Andrew Cagney <ac131313@redhat.com>
* valops.c (PUSH_ARGUMENTS): Delete definition.
* gdbarch.sh (PUSH_ARGUMENTS): Don't require when multi-arch
partial. Default to default_push_arguments.
* gdbarch.h, gdbarch.c: Regenerate.
2002-02-09 Andrew Cagney <ac131313@redhat.com>
* defs.h (throw_exception): Rename return_to_top_level. Update
comments.
* utils.c (error_stream, internal_verror, quit): Ditto.
* top.c (throw_exception, catcher): Ditto.
* sparclet-rom.c (sparclet_load): Ditto.
* remote.c (interrupt_query, minitelnet): Ditto.
* remote-sds.c (interrupt_query): Ditto.
* remote-mips.c (mips_error, mips_kill): Ditto.
* ocd.c (interrupt_query): Ditto.
* monitor.c (monitor_interrupt_query): Ditto.
* m3-nat.c (suspend_all_threads, thread_resume_command): Ditto.
* target.h: Update comment.
* m3-nat.c, ocd.c, sparclet-rom.c: Update copyright.
2002-02-09 Andrew Cagney <ac131313@redhat.com>
* gdbarch.sh (TARGET_LONG_DOUBLE_FORMAT): Default to
default_double_format.
* gdbarch.h, gdbarch.c: Re-generate.
* findvar.c (floatformat_unknown): Delete variable definition.
* doublest.h (floatformat_unknown): Delete variable declaration.
2002-02-09 Jim Blandy <jimb@redhat.com>
* stabsread.c (read_type): Add code to parse Sun's syntax for
prototyped function types.
2002-02-09 Andrew Cagney <ac131313@redhat.com>
* Makefile.in (SUBDIR_CLI_INITS): Set to SUBDIR_CLI_SRCS.
(SUBDIR_MI_INITS): Set to SUBDIR_MI_SRCS.
2002-02-09 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* xcoffsolib.c (_initialize_xcoffsolib): Renamed from
_initialize_solib. Fixes name clash with solib.c:_initialize_solib,
now _initialize_xcoffsolib gets called again and overrides the
commands from solib.c in a native configuration.
2002-02-09 Mark Kettenis <kettenis@gnu.org>
* doublest.c (store_typed_floating): Don't try to return a value.
Fixes PR gdb/290.
2002-02-08 Jim Blandy <jimb@redhat.com>
* c-typeprint.c (c_type_print_varspec_suffix): If a function type
is prototyped and has no arguments, print its argument list as
`(void)'.
2002-02-08 Chris Demetriou <cgd@broadcom.com>
* MAINTAINERS (write-after-approval): Add myself.
(paper-trail): I've escaped!
2002-02-08 Christopher Faylor <cgf@redhat.com>
* win32-nat.c (cygwin_pid_to_str): Revert 2002-02-08 change xasprintf
changes.
(_initialize_check_for_gdb_ini): Ditto.
2002-02-08 Martin M. Hunt <hunt@redhat.com>
* win32-nat.c (cygwin_pid_to_str): Fix typo.
xaprintf -> xasprintf.
2002-02-08 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c: Remove use of printf and sprintf functions.
2002-02-08 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_frame_chain_valid): Make static.
(arm_push_arguments): Likewise.
(arm_gdbarch_init): New function.
(_initialize_arm_tdep): Call it.
* config/arm/tm-arm.h (GDB_MULTI_ARCH): Set to 1.
(TARGET_DOUBLE_FORMAT): Test TARGET_BYTE_ORDER, not target_byte_order.
(FRAME_CHAIN_VALID): Delete.
(arm_frame_chain_valid): Delete declaration.
(PUSH_ARGUMENTS): Delete.
(arm_push_arguments): Delete declaration.
(CALL_DUMMY_P): Delete.
2002-02-08 Andrew Cagney <ac131313@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* gdbtypes.c (build_gdbtypes): Disable setting a specific float format
on builtin float types.
2002-02-08 Daniel Jacobowitz <drow@mvista.com>
* utils.c: Include <curses.h> before "bfd.h".
* tui/tui-hooks.c: Likewise.
* tui/tui.c: Likewise.
* tui/tuiCommand.c: Likewise.
* tui/tuiData.c: Likewise.
* tui/tuiDataWin.c: Likewise.
* tui/tuiDisassem.c: Likewise.
* tui/tuiGeneralWin.c: Likewise.
* tui/tuiIO.c: Likewise.
* tui/tuiLayout.c: Likewise.
* tui/tuiRegs.c: Likewise.
* tui/tuiSource.c: Likewise.
* tui/tuiSourceWin.c: Likewise.
* tui/tuiStack.c: Likewise.
* tui/tuiWin.c: Likewise.
2002-02-07 Elena Zannoni <ezannoni@redhat.com>
* sh-tdep.c (sh_nofp_frame_init_saved_regs): Extend where[] array
to include space for pseudoregs as well. Update loops accordingly.
(sh_fp_frame_init_saved_regs): Ditto.
(sh_init_extra_frame_info, sh_pop_frame): Split long lines.
2002-02-07 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Andreas Schwab is GNU/Linux m68k maintainer.
Add Richard Earnshaw to Arm maintainers.
2002-02-07 Andrew Cagney <ac131313@redhat.com>
* defs.h (warning_begin): Delete declaration.
* config/powerpc/tm-ppcle-eabi.h (TARGET_BYTE_ORDER_DEFAULT):
Delete macro.
2002-02-07 Michael Snyder <msnyder@redhat.com>
* solib-legacy.c (legacy_svr4_fetch_link_map_offsets):
Logic bug, remove misplaced else.
2002-02-07 Klee Dienes <klee@apple.com>
* fork-inferior.c (fork_inferior): Add '!' to the list of
characters that need to be quoted when building a string for the
shell. Quote '!' specifically with a backslash, since CSH chokes
when trying to evaluate "str!str".
2002-02-06 Nick Clifton <nickc@cambridge.redhat.com>
* rdi-share/host.h: Only provide a typedef for bool if it is not
defined.
2002-02-04 Michael Snyder <msnyder@redhat.com>
* breakpoint.h (enum bptype): Add new overlay event bp type.
(enable_overlay_breakpoints, disable_overlay_breakpoints): Export.
* breakpoint.c (create_internal_breakpoint): New function.
(internal_breakpoint_number): Moved into create_internal_breakpoint.
(create_longjmp_breakpoint): Use create_internal_breakpoint.
(create_thread_event_breakpoint): Ditto.
(create_solib_event_breakpoint): Ditto.
(create_overlay_event_breakpoint): New function.
(enable_overlay_breakpoints, disable_overlay_breakpoints): New funcs.
(update_breakpoints_after_exec): Delete and re-initialize
overlay event breakpoints after an exec. Add FIXME comment
about longjmp breakpoint.
(print_it_typical): Ignore overlay event breakpoints.
(print_one_breakpoint): Ditto.
(mention): Ditto.
(bpstat_what): Do not stop for overlay event breakpoints.
(delete_breakpoint): Don't delete overlay event breakpoints.
(breakpoint_re_set_one): Delete the overlay event breakpoint.
(breakpoint_re_set): Re-create overlay event breakpoint.
* symfile.c (overlay_auto_command): Enable overlay breakpoints.
(overlay_manual_command): Disable overlay breakpoints.
(overlay_off_command): Disable overlay breakpoints.
2002-02-06 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c: Include elf-bfd.h and coff/internal.h.
(MSYMBOL_SET_SPECIAL, MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): Move defines
to here from config/tm-arm.h.
(coff_sym_is_thumb): Make static.
(arm_elf_make_msymbol_special): New function.
(arm_coff_make_msymbol_special): New function.
* config/arm/tm-arm.h (MSYMBOL_SET_SPECIAL): Delete definition.
(MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): Likewise.
(coff_sym_is_thumb): Delete declaration.
(arm_elf_make_msymbol_special): Declare.
(arm_coff_make_msymbol_special): Declare.
(ELF_MAKE_MSYMBOL_SPECIAL): Call arm_elf_make_msymbol_special.
(COFF_MAKE_MSYMBOL_SPECIAL): Call arm_coff_make_msymbol_special.
2002-02-06 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_software_single_step): ANSIfy function declaration.
2002-02-06 Richard Earnshaw <rearnsha@arm.com>
* gdbarch.sh (PRINT_FLOAT_INFO): Add rule.
* gdbarch.c gdbarch.h: Regenerate.
* arch-utils.c (default_print_float_info): New function.
* arch-utils.h (default_print_float_info): Prototype it.
* infcmd.c (float_info): Call PRINT_FLOAT_INFO.
* doc/gdbint.texinfo (FLOAT_INFO): Mark as deprecated.
(PRINT_FLOAT_INFO): Document it.
* arm-tdep.c (arm_print_float_info): Renamed from arm_float_info.
* config/arm/tm-arm.h (FLOAT_INFO): Delete.
(PRINT_FLOAT_INFO): Define.
2002-02-06 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c (_initialize_check_for_gdb_ini):
Add typecast to sprintf argument to suppress a warning.
2002-02-05 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c (last_sig): Changed type of variable to target_signal,
to allow easier handling of pass state.
(DEBUG_EXCEPTION_SIMPLE): New macro, used in handle_exception,
that gives exception name and address.
(handle_exception): Use DEBUG_EXCEPTION_SIMPLE macro
and set last_sig value to ourstatus->value.sig. Some missing
exceptions added.
(child_continue): Correctly report continue_status.
(get_child_debug_event,do_initial_child_stuff): Set last_sig to
TARGET_SIGNAL_0 (new default value).
(child_resume): consider sig argument passed to decide if
the exception should be passed to debuggee or not.
2002-02-05 Michael Snyder <msnyder@redhat.com>
* regcache.c (fetch_register): Call target_fetch_register
only if we don't call FETCH_PSEUDO_REGISTER.
(store_register): Call target_store_register only if we
don't call STORE_PSEUDO_REGISTER.
2002-02-05 Elena Zannoni <ezannoni@redhat.com>
* gdbarch.sh: Add definitions for COFF_MAKEMSYMBOL_SPECIAL and
ELF_MAKE_MSYMBOL_SPECIAL.
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.c (default_make_msymbol_special): New function.
* arch-utils.h (default_make_msymbol_special): Export.
* elfread.c (elf_symtab_read): Compile use of
ELF_MAKE_MSYMBOL_SPECIAL unconditionally because it is now
multiarched.
* coffread.c (coff_symtab_read): Ditto, for
COFF_MAKE_MSYMBOL_SPECIAL.
2002-02-05 Jim Blandy <jimb@redhat.com>
* solib-svr4.c (svr4_truncate_ptr): New function.
(svr4_relocate_section_addresses): Do the address arithmetic with
the appropriate truncation for target addresses, even when
CORE_ADDR is larger than a target address.
2002-02-05 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c (mywait): Cast second argument of waitpid
to (int *).
2002-02-05 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c (kill_inferior): Remove commented out
code.
2002-02-05 Daniel Jacobowitz <drow@mvista.com>
* c-valprint.c (c_val_print): Handle TYPE_CODE_COMPLEX.
2002-02-05 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c: Remove unused include files.
2002-02-05 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c: Define PTRACE_ARG3_TYPE.
(read_inferior_memory): Use it.
(write_inferior_memory): Likewise.
2002-02-05 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c (create_inferior): Call strerror instead of
grubbing through sys_errlist.
2002-02-05 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-low.c: New file, copied exactly from low-linux.c.
2002-02-04 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c (handle_exception): Handle Ctrl-Break exception.
* cli/cli-decode.c (do_cfunc, set_cmd_cfunc): New functions. (do_sfunc, set_cmd_sfunc): New functions. * command.h (struct cmd_list_element): Add field func. * cli/cli-decode.h (struct cmd_list_element): Ditto. * command.h (set_cmd_sfunc, set_cmd_cfunc): Declare. * cli/cli-decode.h: Ditto. * cli/cli-decode.c (help_cmd): Test for func not cfunc/sfunc. (help_all, help_cmd_list): Ditto. (find_cmd, complete_on_cmdlist): Ditto. * top.c (execute_command): Ditto. * cli/cli-setshow.c (do_setshow_command): Call func instead of function.sfunc. * infcmd.c (notice_args_read): Fix function signature. * cli/cli-cmds.c (init_cli_cmds): Use set_cmd_sfunc. * cli/cli-decode.c (add_set_cmd): Ditto. * utils.c (initialize_utils): Ditto. * maint.c (_initialize_maint_cmds): Ditto. * infrun.c (_initialize_infrun): Ditto. * demangle.c (_initialize_demangler): Ditto. * remote.c (add_packet_config_cmd): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto. * cris-tdep.c (_initialize_cris_tdep): Ditto. * proc-api.c (_initialize_proc_api): Ditto. * kod.c (_initialize_kod): Ditto. * valprint.c (_initialize_valprint): Ditto. * top.c (init_main): Ditto. * infcmd.c (_initialize_infcmd): Ditto. * corefile.c (_initialize_core): Ditto. * arm-tdep.c (_initialize_arm_tdep): Ditto. * arch-utils.c (initialize_current_architecture): Ditto. (_initialize_gdbarch_utils): Ditto. * alpha-tdep.c (_initialize_alpha_tdep): Ditto. * cli/cli-decode.c (add_cmd): Use set_cmd_cfunc. * wince.c (_initialize_inftarg): Ditto. * symfile.c (_initialize_symfile): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto. * language.c (_initialize_language): Ditto. * arc-tdep.c (_initialize_arc_tdep): Ditto.
2002-02-05 04:37:23 +00:00
2002-02-04 Andrew Cagney <ac131313@redhat.com>
* cli/cli-decode.c (do_cfunc, set_cmd_cfunc): New functions.
(do_sfunc, set_cmd_sfunc): New functions.
* command.h (struct cmd_list_element): Add field func.
* cli/cli-decode.h (struct cmd_list_element): Ditto.
* command.h (set_cmd_sfunc, set_cmd_cfunc): Declare.
* cli/cli-decode.h: Ditto.
* cli/cli-decode.c (help_cmd): Test for func not cfunc/sfunc.
(help_all, help_cmd_list): Ditto.
(find_cmd, complete_on_cmdlist): Ditto.
* top.c (execute_command): Ditto.
* cli/cli-setshow.c (do_setshow_command): Call func instead of
function.sfunc.
* infcmd.c (notice_args_read): Fix function signature.
* cli/cli-cmds.c (init_cli_cmds): Use set_cmd_sfunc.
* cli/cli-decode.c (add_set_cmd): Ditto.
* utils.c (initialize_utils): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* infrun.c (_initialize_infrun): Ditto.
* demangle.c (_initialize_demangler): Ditto.
* remote.c (add_packet_config_cmd): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* cris-tdep.c (_initialize_cris_tdep): Ditto.
* proc-api.c (_initialize_proc_api): Ditto.
* kod.c (_initialize_kod): Ditto.
* valprint.c (_initialize_valprint): Ditto.
* top.c (init_main): Ditto.
* infcmd.c (_initialize_infcmd): Ditto.
* corefile.c (_initialize_core): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* arch-utils.c (initialize_current_architecture): Ditto.
(_initialize_gdbarch_utils): Ditto.
* alpha-tdep.c (_initialize_alpha_tdep): Ditto.
* cli/cli-decode.c (add_cmd): Use set_cmd_cfunc.
* wince.c (_initialize_inftarg): Ditto.
* symfile.c (_initialize_symfile): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* language.c (_initialize_language): Ditto.
* arc-tdep.c (_initialize_arc_tdep): Ditto.
2002-02-04 Michael Snyder <msnyder@redhat.com>
* memattr.c (_initialize_mem): Elaborate the help for 'mem' command.
2002-02-04 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/Makefile.in: Add regformats directory to INCLUDE_CFLAGS.
Add rules for building the register data files.
2002-02-04 Daniel Jacobowitz <drow@mvista.com>
* regformats/regdat.sh: Add braces to the definition of
expedite_regs_${arch}.
2002-02-04 Daniel Jacobowitz <drow@mvista.com>
* regformats/regdef.h (struct reg): Add comment describing the
requirements for offset and size fields.
2002-02-04 Andreas Schwab <schwab@suse.de>
* config/ia64/linux.mh: Don't set NAT_CLIBS and REGEX.
* config/ia64/linux.mt: Don't set GDBSERVER_LIBS.
2002-02-04 Richard Earnshaw <rearnsha@arm.com>
* gdbarch.sh (copyright): Update years in generated header.
(SMASH_TEXT_ADDRESS): Add rule.
* gdbarch.h, gdbarch.c: Re-generate.
* coffread.c: Multi-arch uses of SMASH_TEXT_ADDRESS.
* dbxread.c: Likewise.
* dwarfread.c: Likewise.
* elfread.c: Likewise.
* somread.c: Likewise.
* arm-tdep.c (arm_smash_text_address): New function.
* config/arm/tm-arm.h (SMASH_TEXT_ADDRESS): Define in terms of above.
2002-02-04 Pierre Muller <muller@ics.u-strasbg.fr>
Add support for hardware watchpoints on win32 native.
* win32-nat.c (CONTEXT_DEBUG_DR macro): Add use of
CONTEXT_DEBUG_REGISTERS.
(dr variable): New variable. Static array containing a local copy
of debug registers.
(debug_registers_changed): New variable. Reflects when debug registers
are changed and need to be written to inferior.
(debug_registers_used): New variable. Reflects when any debug register
was set, used when new threads are created.
(cygwin_set_dr, cygwin_set_dr7, cygwin_get_dr6): New functions used by
i386-nat code.
(thread_rec): Set dr array if id is the thread of current_event .
(child_continue, child_resume): Change the debug registers for all
threads if debug_registers_changed.
(child_add_thread): Change the debug registers if debug_registers_used.
* config/i386/cygwin.mh: Add use of i386-nat.o file.
Link nm.h to new nm-cygwin.h file.
+ config/i386/nm-cygwin.h: New file. Contains the macros used for use
of hardware registers.
2002-02-03 Andrew Cagney <ac131313@redhat.com>
* valprint.c (print_floating): Allow non TYPE_CODE_FLT types.
Restore behavour broken by 2002-01-20 Andrew Cagney
<ac131313@redhat.com> IEEE_FLOAT removal.
2002-02-03 Daniel Jacobowitz <drow@mvista.com>
* c-valprint.c (c_val_print): Pass a proper valaddr to
cp_print_class_method.
* valops.c (search_struct_method): If there is only one method
and args is NULL, return that method.
2002-02-03 Daniel Jacobowitz <drow@mvista.com>
* gdbtypes.c (init_simd_type): Use TYPE_TAG_NAME instead of
accessing tag_name directly.
2002-02-03 Daniel Jacobowitz <drow@mvista.com>
* ax-gdb.c (find_field): Use TYPE_TAG_NAME instead
of accessing tag_name directly.
2002-02-03 Daniel Jacobowitz <drow@mvista.com>
PR gdb/280
* gdbtypes.c (replace_type): New function.
* gdbtypes.h (replace_type): Add prototype.
* stabsread.c (read_type): Use replace_type.
2002-02-03 Richard Earnshaw <rearnsha@arm.com>
* Makefile.in (memattr.o): Add missing dependencies rule.
2002-02-03 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
* breakpoint.c (break_at_finish_command): Really export.
(break_at_finish_at_depth_command): Ditto.
(tbreak_at_finish_command): Ditto.
* hppa-tdep.c: Include completer.h.
* Makefile.in (hppa-tdep.o): Add dependency on $(completer_h).
(COMMON_OBS): Remove duplicate ui-file.o, frame.o, doublest.o.
2002-02-01 Andrew Cagney <ac131313@redhat.com>
* utils.c (do_write): New function.
(error_stream): Rewrite combining the code from error_begin and
verror.
(verror): Rewrite using error_stream.
(error_begin): Delete function.
2002-02-01 Andrew Cagney <ac131313@redhat.com>
* utils.c (error_begin): Make static.
* defs.h (error_begin): Delete declaration.
* linespec.c (cplusplus_error): Replace cplusplus_hint.
(decode_line_1): Use cplusplus_error instead of error_begin,
cplusplus_hint and return_to_top_level.
* coffread.c (coff_symfile_read): Use error instead of error_begin
and return_to_top_level.
* infrun.c (default_skip_permanent_breakpoint): Ditto.
2002-02-01 Andrew Cagney <ac131313@redhat.com>
* language.h (type_error, range_error): Make string parameter
constant.
* language.c (warning_pre_print): Delete extern declaration.
* dwarfread.c (warning_pre_print): Ditto.
* language.c (type_error, range_error): Rewrite to use verror and
vwarning instead of warning_begin.
2002-02-01 Michael Snyder <msnyder@redhat.com>
* breakpoint.c (breakpoint_re_set): Delete ancient #if 0 code.
(set_ignore_count): Move misplaced comment back where it belongs.
2002-02-02 00:56:37 +00:00
2002-02-01 Andrew Cagney <ac131313@redhat.com>
* command.h (NO_FUNCTION): Delete macro.
* cli/cli-decode.h (NO_FUNCTION): Ditto.
* top.c (execute_command): Replace NO_FUNCTION with NULL.
* tracepoint.c (_initialize_tracepoint): Ditto.
* cli/cli-decode.c (add_set_cmd): Ditto.
* cli/cli-cmds.c (init_cli_cmds): Ditto.
2002-02-01 Daniel Jacobowitz <drow@mvista.com>
* gnu-v3-abi.c (gnuv3_virtual_fn_field): Update comments.
Update ``this'' pointer when calling virtual functions.
2002-02-01 Michael Snyder <msnyder@redhat.com>
* breakpoint.c (create_temp_exception_breakpoint): Delete.
* hppa-tdep.c: Deprecate xbreak, txbreak and bx commands.
2002-02-01 Daniel Jacobowitz <drow@mvista.com>
* regformats/reg-arm.dat: New file.
* regformats/reg-i386.dat: New file.
* regformats/reg-ia64.dat: New file.
* regformats/reg-m68k.dat: New file.
* regformats/reg-mips.dat: New file.
* regformats/reg-ppc.dat: New file.
* regformats/reg-sh.dat: New file.
* regformats/regdef.h: New file.
* regformats/regdat.sh: New file.
2002-02-01 Richard Earnshaw <reanrsha@arm.com>
* arm-tdep.c (arm_frameless_function_invocation): Add some comments.
(arm_frame_args_address, arm_frame_locals_address): New functions.
(arm_frame_num_args): New function.
* config/tm-arm.h (FRAME_ARGS_ADDRESS): Call arm_frame_args_address.
(FRAME_LOCALS_ADDRESS): Call arm_frame_locals_address.
(FRMA_NUM_ARGS): Call arm_frame_num_args.
2002-01-31 Michael Snyder <msnyder@redhat.com>
* breakpoint.c (break_at_finish_command): Export.
(break_at_finish_at_depth_command): Export.
(tbreak_at_finish_command): Export.
(_initialize_breakpoint): Delete "xbreak" and "tbreak" commands.
* hppa-tdep.c (_initialize_hppa_tdep): Add "xbreak" and
"tbreak" commands, which are HPPA specific.
* printcmd.c (disassemble_command): Remove an ancient
artifact of an old merge.
* symfile.h (enum overlay_debugging_state):
Define enum constant values for overlay mode.
* symfile.c (overlay_debugging): Use enums instead of literals.
(overlay_is_mapped, overlay_auto_command,
overlay_manual_command): Ditto.
* breakpoint.c (insert_breakpoints, remove_breakpoint,
breakpoint_here_p, breakpoint_inserted_here_p,
breakpoint_thread_match, bpstat_stop_status,
describe_other_breakpoints, check_duplicates, clear_command):
Coding standard fixes.
* target.c (target_xfer_memory): Add spaces, coding standard.
(do_xfer_memory): Add missing line to trust-readonly
code: check bfd SEC_READONLY flag for section.
2002-01-31 20:45:17 +00:00
2002-01-31 Andrew Cagney <ac131313@redhat.com>
* PROBLEMS: Fix typo, 5.1->5.1.1.
2002-01-31 20:45:17 +00:00
2002-01-30 Daniel Jacobowitz <drow@mvista.com>
* symtab.c (find_pc_sect_psymtab): Do not search psymtabs for
data symbols, since we search based on textlow and texthigh.
(find_pc_sect_symtab): Likewise.
2002-01-30 Andrew Cagney <ac131313@redhat.com>
* defs.h (vwarning): Declare.
* utils.c (vwarning): New function.
(warning): Call vwarning.
(warning_begin): Delete function.
* rs6000-nat.c (vmap_ldinfo): Use the function warning to print
the warning message.
* d10v-tdep.c (d10v_address_to_pointer) [0]: Delete call to
warning_begin.
2002-01-30 Michael Snyder <msnyder@redhat.com>
* NEWS: Mention "set trust-readonly-sections" command.
Mention generate-core-file command.
2002-01-15 Michael Snyder <msnyder@redhat.com>
* target.c: New command, "set trust-readonly-sections on".
(do_xfer_memory): Honor the suggestion to trust readonly sections
by reading them from the object file instead of from the target.
(initialize_targets): Register command "set trust-readonly-sections".
2002-01-29 Andrew Cagney <ac131313@redhat.com>
* parse.c (target_map_name_to_register): Simplify, search regs and
pseudo-regs using a single loop.
2002-01-31 01:31:54 +00:00
2002-01-30 Andrew Cagney <ac131313@redhat.com>
* PROBLEMS: Note that the i386 fix was missing from 5.1.1.
2002-01-15 Rodney Brown <rbrown64@csc.com.au>
* config/i386/tm-i386v4.h: Define HAVE_I387_REGS.
* config/i386/i386v42mp.mh: Add i387-nat.o .
* i386v4-nat.c: Include i387-nat.h.
(supply_fpregset): Use i387_supply_fsave.
(fill_fpregset): Use i387_fill_fsave.
2002-01-30 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_call_dummy_words): Define.
* arm-linux-tdep.c (arm_linux_call_dummy_words): Define.
* config/arm/tm-arm.h (CALL_DUMMY_P): Define.
(CALL_DUMMY_WORDS): Define.
(arm_call_dummy_words): Declare.
* config/arm/tm-linux.h (CALL_DUMMY_WORDS): Define.
(arm_linux_call_dummy_words): Declare.
2002-01-30 Andreas Schwab <schwab@suse.de>
* m68klinux-nat.c: Fix last change to use regcache_collect
instead of referencing registers[] directly.
2002-01-30 00:18:17 +00:00
2002-01-29 Andrew Cagney <ac131313@redhat.com>
* parse.c (target_map_name_to_register): Delete code wrapped in
#ifdef REGISTER_NAME_ALIAS_HOOK.
2002-01-28 Michael Snyder <msnyder@redhat.com>
* regcache.c (legacy_read_register_gen): Need to be able to
read pseudo-register as well as real register.
(legacy_write_register_gen): Ditto.
2002-01-29 04:42:45 +00:00
2002-01-28 Andrew Cagney <ac131313@redhat.com>
* config/mips/tm-wince.h (TARGET_BYTE_ORDER): Delete.
* config/sparc/tm-sparc.h (TARGET_BYTE_ORDER): Delete.
* config/ns32k/tm-umax.h (TARGET_BYTE_ORDER): Delete.
* config/ia64/tm-ia64.h (TARGET_BYTE_ORDER): Delete.
* config/m32r/tm-m32r.h (TARGET_BYTE_ORDER): Delete.
* config/m68k/tm-m68k.h (TARGET_BYTE_ORDER): Delete.
* config/m88k/tm-m88k.h (TARGET_BYTE_ORDER): Delete.
* config/mn10200/tm-mn10200.h (TARGET_BYTE_ORDER): Delete.
* config/pa/tm-hppa.h (TARGET_BYTE_ORDER): Delete.
* config/sh/tm-wince.h (TARGET_BYTE_ORDER): Delete.
* config/v850/tm-v850.h (TARGET_BYTE_ORDER): Delete.
* config/vax/tm-vax.h (TARGET_BYTE_ORDER): Delete.
* config/z8k/tm-z8k.h (TARGET_BYTE_ORDER): Delete.
* config/i960/tm-i960.h (TARGET_BYTE_ORDER): Delete.
* config/i386/tm-i386.h (TARGET_BYTE_ORDER): Delete.
* config/h8500/tm-h8500.h (TARGET_BYTE_ORDER): Delete.
* config/h8300/tm-h8300.h (TARGET_BYTE_ORDER): Delete.
* config/fr30/tm-fr30.h (TARGET_BYTE_ORDER): Delete.
* config/d30v/tm-d30v.h (TARGET_BYTE_ORDER): Delete.
* config/alpha/tm-alpha.h (TARGET_BYTE_ORDER): Delete.
2002-01-28 Andrew Cagney <ac131313@redhat.com>
* arch-utils.c (TARGET_BYTE_ORDER_DEFAULT): Delete macro.
(target_byte_order): Initialize to BFD_ENDIAN_BIG.
(initialize_current_architecture): Update target_byte_order using
information from BFD.
* config/mcore/tm-mcore.h (TARGET_BYTE_ORDER_DEFAULT):
* config/arm/tm-arm.h (TARGET_BYTE_ORDER_DEFAULT): Delete.
2002-01-28 Andrew Cagney <ac131313@redhat.com>
* config/vax/tm-vax.h (INVALID_FLOAT): Move macro from here...
* vax-tdep.c (INVALID_FLOAT): To here. Document why it is broken.
* rs6000-tdep.c (rs6000_do_registers_info): Delete code wrapped in
#ifdef INVALID_FLOAT.
* infcmd.c (do_registers_info): Ditto.
* values.c (unpack_double): Ditto. Add comment.
* config/ns32k/tm-umax.h (INVALID_FLOAT): Delete macro that was
already commented out.
2002-01-26 Andreas Schwab <schwab@suse.de>
* config/m68k/nm-linux.h (FETCH_INFERIOR_REGISTERS): Define.
* m68klinux-nat.c: Update ptrace interface for fetching/storing
registers and add support for PTRACE_GETREGS.
2002-01-24 08:05:31 +00:00
2002-01-24 Andrew Cagney <ac131313@redhat.com>
GDB 5.1.1 released from 5.1 branch.
* NEWS: Add 5.1.1 news.
* README: Sync with 5.1 branch.
2002-01-23 Fred Fish <fnf@redhat.com>
* mdebugread.c (parse_partial_symbols): Only copy stabstring1 to
stabstring on initial malloc. Reallocing will copy it for us,
if necessary.
2002-01-23 Elena Zannoni <ezannoni@redhat.com>
* Makefile.in (hpread_h): Delete.
(HFILES_NO_SRCDIR): Remove hpread.h.
(ALLDEPFILES): Remove hp-psymtab-read.c and hp-symtab-read.c.
(hpread.o): Update dependencies.
(hp-psymtab-read.o, hp-symtab-read.o): Remove.
* hp-psymtab-read.c: Remove file.
* hp-symtab-read.c: Remove file.
* hpread.h: Remove file.
* hpread.c: Merge all contents of hp-psymtab-read.c,
hp-symtab-read.c and hpread.h into this file, as it was prior to
January 1999.
* config/pa/hpux11w.mh, config/pa/hpux11.mh,
config/pa/hpux1020.mh, config/pa/hppaosf.mh,
config/pa/hppahpux.mh, config/pa/hppabsd.mh (NATDEPFILES):
Remove hp-psymtab-read.o and hp-symtab-read.o, add hpread.o.
2002-01-23 Elena Zannoni <ezannoni@redhat.com>
* ppc-linux-nat.c (ppc_register_u_addr, supply_gregset,
fill_gregset): Call gdbarch_tdep() just once, assign result to
variable and use that, instead of calling the function several
times.
2002-01-24 Alexandre Oliva <aoliva@redhat.com>
* configure.host: Accept sparcv9 as alias for sparc64.
* configure.tgt: Likewise.
2002-01-22 Kevin Buettner <kevinb@redhat.com>
* solib-aix5.c (build_so_list_from_mapfile)
(aix5_relocate_main_executable): Fix xcalloc() calls so order of
arguments is not reversed.
* solib-sunos.c (sunos_relocate_main_executable): Likewise.
* solib-svr4.c (svr4_relocate_main_executable): Likewise.
2002-01-22 Elena Zannoni <ezannoni@redhat.com>
* sh-tdep.c (sh_pseudo_register_read): New function. Renamed and
modified version of obsolete sh_fetch_pseudo_register.
(sh_fetch_pseudo_register): Rename to sh_pseudo_register_read.
(sh4_register_read): New function.
(sh_pseudo_register_write): New function. Renamed and modified
version of obsolete sh_store_pseudo_register.
(sh_store_pseudo_register): Rename to sh_pseudo_register_write.
(sh4_register_write): New function.
(sh_gdbarch_init): Remove setting of gdbarch function
fetch_pseudo_register and store_pseudo_register. Remove setting of
register_convert_to_raw, register_convert_to_virtual,
register_convertible.
(sh_sh4_register_convertible): Delete. No longer needed. All is
taken care by architecture specific functions
register_read/register_write.
(sh_sh4_register_convert_to_virtual): Make static.
(sh_sh4_register_convert_to_raw): Ditto.
2002-01-22 Andrew Cagney <ac131313@redhat.com>
* doublest.c (floatformat_is_negative): Assert FMT is non NULL.
(floatformat_is_nan, floatformat_mantissa): Ditto.
* gdbtypes.c (_initialize_gdbtypes): Initialize TYPE_FLOATFORMAT
for builtin_type_ieee_single_little, builtin_type_ieee_double_big,
builtin_type_ieee_double_little,
builtin_type_ieee_double_littlebyte_bigword,
builtin_type_m68881_ext, builtin_type_i960_ext,
builtin_type_m88110_ext, builtin_type_m88110_harris_ext,
builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword,
builtin_type_ia64_spill_big, builtin_type_ia64_spill_little and
builtin_type_ia64_quad_big, builtin_type_ia64_quad_little.
2002-01-22 Corinna Vinschen <vinschen@redhat.com>
* xstormy16-tdep.c (xstormy16_scan_prologue): Add frameless
parameter. Set frameless flag if it exists and depended of
whether the scanned function is frameless or not.
(xstormy16_skip_prologue): If function is frameless, return
result of xstormy16_scan_prologue().
(xstormy16_frame_init_saved_regs): Adjust xstormy16_scan_prologue()
call.
2002-01-21 Elena Zannoni <ezannoni@redhat.com>
* sh-tdep.c (sh_fp_frame_init_saved_regs, sh_push_arguments,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs,
sh_sh4_register_byte, sh_sh4_register_raw_size,
sh_sh3e_register_virtual_type, sh_sh4_register_virtual_type,
sh_sh4_register_convertible, sh_sh4_register_convert_to_virtual,
sh_sh4_register_convert_to_raw, sh_fetch_pseudo_register,
sh_store_pseudo_register, sh_do_pseudo_register): Call
gdbarch_tdep() just once, assign result to variable and use that,
instead of calling the function several times.
2002-01-20 Mark Kettenis <kettenis@gnu.org>
* go32-nat.c (fetch_register): Use FP_REGNUM_P and FPC_REGNUM_P
macros instead of LAST_FPU_CTRL_REGNUM.
(store_register): Likewise.
2002-01-21 Jim Blandy <jimb@redhat.com>
* infcmd.c (run_command): Check that the `exec' target layer's BFD
is up-to-date before running the program, not just when a program
exits.
2002-01-21 Fred Fish <fnf@redhat.com>
* arm-tdep.c (thumb_skip_prologue): Quit scanning prologue
when we have found all instructions we are looking for.
2002-01-21 Richard Earnshaw <rearnsha@arm.com>
* arm-tdep.c (arm_register_name): New function.
(arm_registers_names): Make static.
* config/arm/tm-arm.h (arm_register_names): Delete declaration.
(arm_register_name): Declare.
(REGISTER_NAME): Use it.
2002-01-21 Richard Earnshaw <rearnsha@arm.com>
Kevin Buettner <kevinb@redhat.com>
Convert arm targets to new FRAME interface.
* arm-tdep.c (struct frame_extra_info): Remove fsr.
(arm_frame_find_save_regs): Delete.
(arm_frame_init_saved_regs): New.
(arm_init_extra_frame_info): Alloacte saved_regs as required.
Allocate extra_info as required. Convert all uses of fsr.regs
to use saved_regs, similarly all uses of EXTRA_FRAME_INFO fields
to use extra_info.
(thumb_scan_prologue, arm_scan_prologue, arm_find_callers_reg)
(arm_frame_chain, arm_frame_saved_pc, arm_pop_frame): Likewise.
(check_prologue_cache, save_prologue_cache): Likewise.
(_initialize_arm_tdep): Ensure prologue_cache is correctly set up.
* config/arm/tm-arm.h (EXTRA_FRAME_INFO): Delete.
(FRAME_FIND_SAVED_REGS): Delete.
(arm_frame_find_saved_regs): Delete prototype.
(arm_frame_init_saved_regs): New prototype.
(FRAME_INIT_SAVED_REGS): Define.
2002-01-21 03:34:30 +00:00
2002-01-20 Andrew Cagney <ac131313@redhat.com>
* config/arc/tm-arc.h (IEEE_FLOAT): Delete.
2002-01-20 Andrew Cagney <ac131313@redhat.com>
From Jeff Law <law@redhat.com>:
* infttrace.c: Include <sys/pstat.h>.
(child_pid_to_exec_file): Revamp. Use pstat call to get the
exec file if the ttrace equivalent fails.
2002-01-20 Andrew Cagney <ac131313@redhat.com>
* rdi-share/devsw.c (openLogFile): Delete unused ``struct tm lt''.
(closeLogFile): Ditto.
2002-01-20 Michael Chastain <mec@shout.net>
* top.c (print_gdb_version): Bump copyright year to 2002.
2002-01-20 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS (Blanket Write Privs): Add Kevin Buettner, Elena
Zannoni and Eli Zaretskii.
2002-01-20 Daniel Jacobowitz <drow@mvista.com>
* buildsym.c: Update copyright years.
* c-typeprint.c: Likewise.
* dwarf2read.c: Likewise.
* f-typeprint.c: Likewise.
* gdbtypes.c: Likewise.
* gdbtypes.h: Likewise.
* hp-symtab-read.c: Likewise.
* hpread.c: Likewise.
* mdebugread.c: Likewise.
* p-typeprint.c: Likewise.
2002-01-20 Andrew Cagney <ac131313@redhat.com>
* remote-sim.c (gdbsim_open): Simplify code testing the macro
TARGET_BYTE_ORDER_SELECTABLE_P. Assume the target is always
byte-order selectable.
* sparc-tdep.c (sparc_target_architecture_hook): Ditto.
* arch-utils.c: Ditto.
(set_endian): Ditto.
(set_endian_from_file): Ditto.
* gdbserver/low-sim.c (create_inferior): Ditto.
* gdbarch.sh: Ditto.
* gdbarch.h: Re-generate.
* config/powerpc/tm-ppc-eabi.h (TARGET_BYTE_ORDER_SELECTABLE_P):
* config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE):
* config/sparc/tm-sparclet.h (TARGET_BYTE_ORDER_SELECTABLE):
* config/mcore/tm-mcore.h (TARGET_BYTE_ORDER_SELECTABLE_P):
* config/arm/tm-wince.h (TARGET_BYTE_ORDER_SELECTABLE_P):
* config/arm/tm-linux.h (TARGET_BYTE_ORDER_SELECTABLE_P):
* config/arc/tm-arc.h (TARGET_BYTE_ORDER_SELECTABLE):
* config/arm/tm-arm.h (TARGET_BYTE_ORDER_SELECTABLE_P): Delete
macro definition.
* config/mips/tm-wince.h: Remove #undef of macro
TARGET_BYTE_ORDER_SELECTABLE.
* config/sh/tm-wince.h: Ditto.
2002-01-20 Daniel Jacobowitz <drow@mvista.com>
* gdbtypes.h (struct cplus_struct_type): Add is_artificial to
member function fields. Add accessor macro
TYPE_FN_FIELD_ARTIFICIAL.
* dwarf2read.c (dwarf2_add_member_fn): Check for artificial methods.
* c-typeprint.c (c_type_print_base): Skip artificial member
functions.
2002-01-20 Daniel Jacobowitz <drow@mvista.com>
* f-typeprint.c: Delete unused function f_type_print_args.
* p-typeprint.c: Delete unused function pascal_type_print_args.
2002-01-20 Daniel Jacobowitz <drow@mvista.com>
* gdbtypes.h (struct type): Fix whitespace. Remove obsolete
comment. Add ``artificial'' to ``union field_location''.
* dwarf2read.c: Remove ad-hoc TYPE_FIELD_ARTIFICIAL.
* buildsym.c (finish_block): Initialize TYPE_FIELD_ARTIFICIAL to 0.
* mdebugread.c (parse_symbol): Likewise.
* stabsread.c (define_symbol): Likewise.
* hp-symtab-read.c (hpread_function_type): Likewise, instead of
initializing TYPE_FIELD_BITPOS to n (obsolete).
(hpread_doc_function_type): Likewise.
* hpread.c (hpread_function_type): Likewise.
2002-01-20 Andrew Cagney <ac131313@redhat.com>
* configure.in (host_makefile_frag): Only require a host makefile
fragment when a native build.
* configure: Re-generate.
2002-01-20 18:05:54 +00:00
2002-01-20 Andrew Cagney <ac131313@redhat.com>
* doublest.h (floatformat_from_type): Declare.
* doublest.c (floatformat_from_type): New function.
(convert_typed_floating): Use.
* valprint.c (print_floating): Replace checks for IEEE_FLOAT with
call to function floatformat_from_type.
* gdbarch.sh (IEEE_FLOAT): Delete.
* gdbarch.h, gdbarch.c: Re-generate.
* config/i960/tm-i960.h (IEEE_FLOAT): Delete macro.
* config/i386/tm-i386.h (IEEE_FLOAT): Ditto.
* config/z8k/tm-z8k.h (IEEE_FLOAT): Ditto.
* config/sparc/tm-sparc.h (IEEE_FLOAT): Ditto.
* config/pa/tm-hppa.h (IEEE_FLOAT): Ditto.
* config/m88k/tm-m88k.h (IEEE_FLOAT): Ditto.
* config/m68k/tm-m68k.h (IEEE_FLOAT): Ditto.
* config/h8500/tm-h8500.h (IEEE_FLOAT): Ditto.
* config/h8300/tm-h8300.h (IEEE_FLOAT): Ditto.
* config/fr30/tm-fr30.h (IEEE_FLOAT): Ditto.
* config/arm/tm-arm.h (IEEE_FLOAT): Ditto.
* config/alpha/tm-alpha.h (IEEE_FLOAT): Ditto.
* s390-tdep.c (s390_gdbarch_init): Do not set ieee_float.
* x86-64-tdep.c (i386_gdbarch_init): Ditto.
* sparc-tdep.c (sparc_gdbarch_init): Ditto.
* sh-tdep.c (sh_gdbarch_init): Ditto.
* mips-tdep.c (mips_gdbarch_init): Ditto.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto.
* cris-tdep.c (cris_gdbarch_init): Ditto.
2002-01-20 Jiri Smid <smid@suse.cz>
* configure.host, configure.tgt: Support x86-64.
* NEWS: Note new target x86-64.
* config/i386/x86-64linux.mh (NATDEPFILES): x86-64-nat.o removed.
* x86-64-linux-nat.c (x86_64_register_u_addr): New function.
* config/i386/nm-x86-64.h (ATTACH_LWP): Removed.
* Makefile.in (x86-64-tdep.o, x86-64-linux-tdep.o,
x86-64-linux-nat.o): Fix dependencies.
2002-01-20 04:23:29 +00:00
2002-01-19 Andrew Cagney <ac131313@redhat.com>
* utils.c: Remove #ifndef MALLOC_INCOMPATIBLE.
* config/sparc/xm-sun4os4.h (PTRACE_ARG3_TYPE): Move macro ....
* config/sparc/nm-sun4os4.h (PTRACE_ARG3_TYPE): ... to here.
* config/sparc/xm-sun4os4.h: Delete file.
* config/sparc/sun4os4.mh (XM_FILE): Delete makefile variable.
2002-01-20 03:29:01 +00:00
2002-01-19 Andrew Cagney <ac131313@redhat.com>
* config/sparc/sparclynx.mh (XM_FILE): Delete.
* config/rs6000/rs6000lynx.mh (XM_FILE): Delete.
* config/m68k/m68klynx.mh (XM_FILE): Delete.
* config/i386/i386lynx.mh (XM_FILE): Delete.
* config/rs6000/xm-rs6000ly.h: Delete file.
* config/sparc/xm-sparclynx.h: Delete file.
* config/m68k/xm-m68klynx.h: Delete file.
* config/i386/xm-i386lynx.h: Delete file.
* config/xm-lynx.h: Delete file.
* config/djgpp/fnchange.lst: Update.
2002-01-19 Jason Thorpe <thorpej@wasabisystems.com>
* alpha-tdep.c (alpha_register_byte): New function.
(alpha_register_raw_size): Ditto.
(alpha_register_virtual_size): Ditto.
(alpha_skip_prologue_internal): Renamed from
alpha_skip_prologue.
(alpha_skip_prologue): New version that calls
alpha_skip_prologue_internal.
(alpha_in_lenient_prologue): Use alpha_skip_prologue_internal.
* config/alpha/tm-alpha.h (SKIP_PROLOGUE): Remove
second argument from alpha_skip_prologue.
(REGISTER_BYTE): Use alpha_register_byte.
(REGISTER_RAW_SIZE): Use alpha_register_raw_size.
(REGISTER_VIRTUAL_SIZE): Use alpha_register_virtual_size.
(FRAMELESS_FUNCTION_INVOCATION): Use
generic_frameless_function_invocation_not.
(FRAME_NUM_ARGS): Use frame_num_args_unknown.
(COERCE_FLOAT_TO_DOUBLE): Use standard_coerce_float_to_double.
2002-01-20 01:12:51 +00:00
2002-01-19 Andrew Cagney <ac131313@redhat.com>
* config/mips/xm-news-mips.h: Delete file.
* config/mips/news-mips.mh (XM_FILE): Delete makefile variable.
* config/m88k/xm-m88k.h: Delete file.
* config/m88k/xm-dgux.h: Do not include xm-m88k.h.
* config/m88k/xm-delta88v4.h: Ditto.
* config/m88k/xm-delta88.h: Ditto.
* config/alpha/xm-fbsd.h: Delete file.
* config/alpha/fbsd.mh (XM_FILE): Delete makefile variable.
* config/sparc/xm-sparc.h: Delete file.
* Makefile.in (xm-sun4os4.h): Delete dependency.
* config/sparc/xm-sun4sol2.h: Do not include xm-sparc.h.
* config/sparc/xm-sun4os4.h: Ditto.
* config/sparc/xm-linux.h: Ditto.
* config/i386/xm-windows.h: Delete file.
2002-01-20 00:44:47 +00:00
2002-01-19 Andrew Cagney <ac131313@redhat.com>
* utils.c: Include <sys/param.h> for MAXPATHLEN.
(gdb_realpath): Use MAXPATHLEN when PATH_MAX is not defined.
2002-01-19 Jason Thorpe <thorpej@wasabisystems.com>
* alpha-tdep.c (alpha_call_dummy_words): New.
* config/alpha/tm-alpha.h (CALL_DUMMY): Remove.
(CALL_DUMMY_P): Define.
(CALL_DUMMY_WORDS): Define.
(SIZEOF_CALL_DUMMY_WORDS): Define.
2002-01-19 Per Bothner <per@bothner.com>
* gnu-v3-abi.c (gnuv3_rtti_type): Guard that vtable_symbol_name
isn't NULL, which can happen with some gcj-3.x-produced code.
2002-01-19 Jason Thorpe <thorpej@wasabisystems.com>
* alpha-tdep.c (alpha_register_virtual_type): New function.
(alpha_init_frame_pc_first): Ditto.
(alpha_fix_call_dummy): Ditto.
(alpha_store_struct_return): Ditto.
(alpha_extract_struct_value_address): Ditto.
* config/alpha/tm-alpha.h (REGISTER_VIRTUAL_TYPE): Use
alpha_register_virtual_type.
(STORE_STRUCT_RETURN): Use alpha_store_struct_return.
(EXTRACT_STRUCT_VALUE_ADDRESS): Use
alpha_extract_struct_value_address.
(FIX_CALL_DUMMY): Use alpha_fix_call_dummy.
(INIT_FRAME_PC): Use init_frame_pc_noop.
(INIT_FRAME_PC_FIRST): Use alpha_init_frame_pc_first.
2002-01-19 Mark Kettenis <kettenis@gnu.org>
* i386gnu-nat.c: Include "i386-tdep.h".
(fetch_fpregs): Simplify code dealing with uninitialized floating
point states such that it doesn't require FP7_REGNUM.
2002-01-18 Jason Thorpe <thorpej@wasabisystems.com>
* alpha-tdep.c (frame_extra_info): New.
(alpha_find_saved_regs): Make static. Use
frame->extra_info.
(alpha_frame_init_saved_regs): New function.
(alpha_frame_saved_pc): Use frame->extra_info.
(temp_saved_regs): Don't declare as struct frame_saved_regs.
(heuristic_proc_desc): Adjust for temp_saved_regs changes.
(init_extra_frame_info): Rename to...
(alpha_init_extra_frame_info): ...this. Use frame->extra_info.
(alpha_print_extra_frame_info): New function.
(alpha_frame_locals_address): Ditto.
(alpha_frame_args_address): Ditto.
(alpha_pop_frame): Use frame->extra_info.
* config/alpha/tm-alpha.h (FRAME_ARGS_ADDRESS): Use
alpha_frame_args_address.
(FRAME_LOCALS_ADDRESS): Use alpha_frame_locals_address.
(alpha_find_saved_regs): Remove prototype.
(FRAME_INIT_SAVED_REGS): Use alpha_frame_init_saved_regs.
(EXTRA_FRAME_INFO): Remove.
(INIT_EXTRA_FRAME_INFO): Use alpha_init_extra_frame_info.
(PRINT_EXTRA_FRAME_INFO): Use alpha_print_extra_frame_info.
2002-01-18 Jason Thorpe <thorpej@wasabisystems.com>
* alpha-tdep.c (alpha_osf_in_sigtramp): New function.
(alpha_cannot_fetch_register): Ditto.
(alpha_cannot_store_register): Ditto.
(alpha_register_convertible): Ditto.
(alpha_use_struct_convention): Ditto.
* config/alpha/tm-alpha.h: Update copyright years.
(IN_SIGTRAMP): Use alpha_osf_in_sigtramp.
(INNER_THAN): Use core_addr_lessthan.
(CANNOT_FETCH_REGISTER): Use alpha_cannot_fetch_register.
(CANNOT_STORE_REGISTER): Use alpha_cannot_store_register.
(REGISTER_CONVERTIBLE): Use alpha_register_convertible.
(USE_STRUCT_CONVENTION): Use alpha_use_struct_convention.
(FRAME_CHAIN): Remove unnecessary cast.
2002-01-18 Andrew Cagney <ac131313@redhat.com>
* NEWS: Document that testsuite/gdb.hp/gdb.threads-hp/ is
obsolete.
2002-01-19 03:32:43 +00:00
2002-01-18 Andrew Cagney <ac131313@redhat.com>
* infptrace.c: Remove ATTRIBUTE_UNUSED. Update copyright.
* monitor.c, remote-array.c, remote-bug.c: Ditto.
* remote-e7000.c, remote-es.c, remote-mips.c: Ditto.
* remote-nindy.c, remote-os9k.c, remote-rdi.c: Ditto.
* remote-rdp.c, remote-sds.c, remote-sim.c: Ditto.
* remote-st.c, remote-vx.c, remote.c, win32-nat.c: Ditto.
* x86-64-linux-nat.c: Ditto.
2002-01-18 Jason Thorpe <thorpej@wasabisystems.com>
* alpha-tdep.c (alpha_register_name): New function.
* config/alpha/tm-alpha.h (REGISTER_NAMES): Remove.
(REGISTER_NAME): Define.
2002-01-18 Jason Thorpe <thorpej@wasabisystems.com>
* config/nm-nbsd.h (KERNEL_U_ADDR): Remove.
2002-01-18 Jason Thorpe <thorpej@wasabisystems.com>
* alpha-tdep.c: Update copyright years.
(alpha_next_pc): New function.
(alpha_software_single_step): Ditto.
* config/alpha/tm-alpha.h: Add prototype for
alpha_software_single_step.
2002-01-18 Jason Thorpe <thorpej@wasabisystems.com>
* alphabsd-nat.c: Update copyright years.
(fill_gregset): Use regcache_collect.
(fill_fpregset): Likewise.
(fetch_inferior_registers): Only fetch integer registers
if requested to do so.
(store_inferior_registers): Only store integer registers
if requested to do so.
2002-01-18 04:51:10 +00:00
2002-01-17 Andrew Cagney <ac131313@redhat.com>
* config/alpha/alpha-osf3.mh (XDEPFILES): Delete.
* config/alpha/alpha-osf2.mh (XDEPFILES): Delete.
* config/alpha/alpha-osf1.mh (XDEPFILES): Delete.
* config/alpha/alpha-linux.mh (XDEPFILES): Delete.
* config/alpha/fbsd.mh (XDEPFILES): Delete.
* config/arm/linux.mh (XDEPFILES): Delete.
* config/arm/nbsd.mh (XDEPFILES): Delete.
* config/i386/i386dgux.mh (XDEPFILES): Delete.
* config/i386/i386sol2.mh (XDEPFILES): Delete.
* config/i386/i386m3.mh (XDEPFILES): Delete.
(NATDEPFILES): Move i387-tdep.o and core-aout.o to here.
* config/i386/i386gnu.mh (XDEPFILES): Delete.
* config/i386/fbsd.mh (XDEPFILES): Delete.
* config/i386/i386bsd.mh (XDEPFILES): Delete.
* config/i386/i386sco5.mh (XDEPFILES): Delete.
* config/i386/i386v4.mh (XDEPFILES): Delete.
* config/i386/i386v42mp.mh (XDEPFILES): Delete.
* config/i386/i386sco4.mh (XDEPFILES): Delete.
* config/i386/i386aix.mh (XDEPFILES): Delete.
* config/i386/go32.mh (XDEPFILES): Delete.
* config/i386/cygwin.mh (XDEPFILES): Delete.
* config/i386/i386lynx.mh (XDEPFILES): Delete.
* config/i386/i386mach.mh (XDEPFILES): Delete.
* config/i386/i386v32.mh (XDEPFILES): Delete.
* config/i386/linux.mh (XDEPFILES): Delete.
* config/i386/nbsdelf.mh (XDEPFILES): Delete.
* config/i386/ncr3000.mh (XDEPFILES): Delete.
* config/i386/i386mk.mh (NATDEPFILES): Rename XDEPFILES.
* config/i386/i386sco.mh (XDEPFILES): Delete.
* config/i386/i386v.mh (XDEPFILES): Delete.
* config/i386/nbsd.mh (XDEPFILES): Delete.
* config/i386/ptx.mh (NATDEPFILES): Rename XDEPFILES.
* config/i386/ptx4.mh (NATDEPFILES): Rename XDEPFILES.
* config/i386/symmetry.mh (XDEPFILES): Delete.
* config/i386/obsd.mh (XDEPFILES): Delete.
* config/i386/x86-64linux.mh (XDEPFILES): Delete.
* config/ia64/linux.mh (XDEPFILES): Delete.
* config/ia64/aix.mh (XDEPFILES): Delete.
* config/m68k/apollo68b.mh (XDEPFILES): Delete.
* config/m68k/dpx2.mh (XDEPFILES): Delete.
* config/m68k/3b1.mh (NATDEPFILES): Rename XDEPFILES.
* config/m68k/apollo68v.mh (XDEPFILES): Delete.
* config/m68k/hp300bsd.mh (XDEPFILES): Delete.
* config/m68k/linux.mh (XDEPFILES): Delete.
* config/m68k/m68klynx.mh (XDEPFILES): Delete.
* config/m68k/m68kv4.mh (XDEPFILES): Delete.
* config/m68k/nbsd.mh (XDEPFILES): Delete.
* config/m68k/sun2os3.mh (XDEPFILES): Delete.
* config/m68k/sun2os4.mh (XDEPFILES): Delete.
* config/m68k/sun3os3.mh (XDEPFILES): Delete.
* config/m68k/sun3os4.mh (XDEPFILES): Delete.
* config/m88k/delta88.mh (XDEPFILES): Delete.
* config/m88k/delta88v4.mh (XDEPFILES): Delete.
* config/m88k/m88k.mh (XDEPFILES): Delete.
* config/mips/littlemips.mh (NATDEPFILES): Rename XDEPFILES.
* config/mips/linux.mh (XDEPFILES): Delete.
* config/mips/irix6.mh (XDEPFILES): Delete.
* config/mips/irix5.mh (XDEPFILES): Delete.
* config/mips/irix4.mh (XDEPFILES): Delete.
* config/mips/irix3.mh (XDEPFILES): Delete.
* config/mips/decstation.mh (XDEPFILES): Delete.
* config/mips/mipsm3.mh (XDEPFILES): Delete.
(NATDEPFILES): Move core-aout.o to here.
* config/ns32k/nbsd.mh (XDEPFILES): Delete.
* config/pa/hpux1020.mh (XDEPFILES): Delete.
* config/pa/hppabsd.mh (XDEPFILES): Delete.
* config/pa/hppahpux.mh (XDEPFILES): Delete.
* config/pa/hpux11w.mh (XDEPFILES): Delete.
* config/pa/hppaosf.mh (XDEPFILES): Delete.
* config/pa/hpux11.mh (XDEPFILES): Delete.
* config/powerpc/aix.mh (XDEPFILES): Delete.
* config/powerpc/nbsd.mh (XDEPFILES): Delete.
* config/powerpc/linux.mh (XDEPFILES): Delete.
* config/romp/rtbsd.mh: Rename XDEPFILES.
* config/rs6000/rs6000lynx.mh (XDEPFILES): Delete.
* config/rs6000/aix4.mh (XDEPFILES): Delete.
* config/rs6000/rs6000.mh (XDEPFILES): Delete.
* config/s390/s390.mh (XDEPFILES): Delete.
* config/vax/vaxbsd.mh (NATDEPFILES): Rename XDEPFILES.
* config/sparc/sun4sol2.mh (XDEPFILES): Delete.
* config/sparc/sun4os4.mh (XDEPFILES): Delete.
* config/sparc/sparclynx.mh (XDEPFILES): Delete.
* config/sparc/nbsdelf.mh (XDEPFILES): Delete.
* config/sparc/nbsd.mh (XDEPFILES): Delete.
* config/sparc/linux.mh (XDEPFILES): Delete.
* config/vax/vaxult.mh (XDEPFILES): Delete.
* config/vax/vaxult2.mh (XDEPFILES): Delete.
* Makefile.in (DEPFILES): Remove XDEPFILES.
2002-01-17 Andrew Cagney <ac131313@redhat.com>
* utils.c (internal_verror): Fix comments, default is yes not no.
Update queries to match. Default to quit and dump core.
2002-01-17 22:15:18 +00:00
2002-01-17 Andrew Cagney <ac131313@redhat.com>
* breakpoint.c: Update assuming #if UI_OUT is always true. Update
copyright.
* defs.h, event-top.c, gdbcmd.h: Ditto.
* infcmd.c, infrun.c, main.c, printcmd.c, remote.c: Ditto.
* source.c, stack.c, symfile.c, symtab.c, thread.c: Ditto.
* top.c, cli/cli-cmds.c, cli/cli-decode.c: Ditto.
* cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.c: Ditto.
* mi/ChangeLog, mi/mi-cmd-break.c, mi/mi-cmd-stack.c: Ditto.
* mi/mi-main.c:Ditto.
* stack.c, symfile.c: Update copyright.
2002-01-17 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/low-hppabsd.c, gdbserver/low-lynx.c,
gdbserver/low-nbsd.c, gdbserver/low-sim.c,
gdbserver/low-sparc.c, gdbserver/low-sun3.c,
gdbserver/low-linux.c, gdbserver/server.c: Correct copyright notices.
2002-01-17 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/low-hppabsd.c (myattach): New function, returning -1.
* gdbserver/low-lynx.c (myattach): Likewise.
* gdbserver/low-nbsd.c (myattach): Likewise.
* gdbserver/low-sim.c (myattach): Likewise.
* gdbserver/low-sparc.c (myattach): Likewise.
* gdbserver/low-sun3.c (myattach): Likewise.
* gdbserver/low-linux.c (myattach): New function.
* gdbserver/server.c (attach_inferior): New function.
(main): Handle "--attach".
2002-01-17 02:04:27 +00:00
2002-01-16 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS (language support): Daniel Jacobwitz is C++
maintainer.
2002-01-15 Daniel Jacobowitz <drow@mvista.com>
* c-typeprint.c (is_type_conversion_operator): Add additional
check for non-conversion operators.
2002-01-15 20:14:04 +00:00
2002-01-15 Michael Snyder <msnyder@redhat.com>
* linux-proc.c: Add "info proc" command, a la procfs.c.
(read_mapping): New function, abstract and re-use code.
(linux_find_memory_regions): Use new func read_mapping.
(linux_info_proc_cmd): New function, implement "info proc".
(_initialize_linux_proc): Add new command "info proc".
2002-01-15 Michael Snyder <msnyder@redhat.com>
* symfile.c (generic_load): Use bfd_map_over_sections method
instead of manipulating bfd structure members directly.
(add_section_size_callback): New function, bfd sections callback
used by generic_load.
(load_sections_callback): New function, bfd sections callback
used by generic_load.
2002-01-15 Elena Zannoni <ezannoni@redhat.com>
[Based on work by Jim Blandy]
* gdbtypes.h (builtin_type_v16qi, builtin_type_v8hi): Export.
(builtin_type_vec128): Export.
* gdbtypes.c (builtin_type_v16qi, builtin_type_v8hi): New SIMD
types.
(builtin_type_vec128): New builtin type for 128 bit vector
registers.
(build_gdbtypes): Initialize builtin_type_v16qi and
builtin_type_v8hi. Create the vec128 register builtin type
structure.
(build_builtin_type_vec128): New function.
(_initialize_gdbtypes): Register builtin_type_v16qi and
builtin_type_v8hi with gdbarch. Same for builtin_type_vec128.
* rs6000-tdep.c (rs6000_register_virtual_type): Change type of
AltiVec register to new builtin type.
2001-01-15 Daniel Jacobowitz <drow@mvista.com>
* stabsread.c (read_type): Pass dbx_lookup_type (typenums)
to make_cv_type.
2002-01-14 Andrew Cagney <ac131313@redhat.com>
* config/pa/tm-hppa.h (DEPRECATED_CLEAN_UP_REGISTER_VALUE): Rename
CLEAN_UP_REGISTER_VALUE.
* regcache.c (supply_register): Update only call.
2002-01-14 Andrew Cagney <ac131313@redhat.com>
* configure.tgt: Mark a29k-*-aout*, a29k-*-coff*, a29k-*-elf*,
a29k-*-ebmon*, a29k-*-kern*, a29k-*-none*, a29k-*-udi* and
a29k-*-vxworks* targets as obsolete.
2002-01-14 Michael Snyder <msnyder@redhat.com>
* linux-proc.c (linux_do_thread_registers): Ignore fpxregs
until we can resolve portability issues.
* gregset.h: Remove references to fpxregs.
* gcore.c (gcore_command): Initialize note_sec to NULL.
2002-01-13 21:58:16 +00:00
2002-01-13 Andrew Cagney <ac131313@redhat.com>
* signals.c (target_signal_to_name): Rewrite. Only use
signals[].name when in bounds and non-NULL.
2002-01-13 Andrew Cagney <ac131313@redhat.com>
From Petr Ledvina <ledvinap@kae.zcu.cz>:
* signals.c (target_signal_to_name): Verify that SIG is within the
bounds of the signals array.
2002-01-13 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Remove arm-coff and arm-pe from target list.
2002-01-13 Keith Seitz <keiths@redhat.com>
* stack.c (print_frame_info_base): Print the frame's pc
only if when print_frame_info_listing_hook is not defined.
2002-01-13 Keith Seitz <keiths@redhat.com>
* varobj.c (varobj_set_value): Make sure that there were no
errors evaluating the object before attempting to set its
value.
value_cast now properly adjusts VALUE_ADDRESS for baseclasses,
so this offset adjustment is no longer necessary.
(create_child): Don't set the error flag if the child is
a CPLUS_FAKE_CHILD.
(value_of_child): If value_fetch_lazy fails, return NULL
so that callers will be notified that an error occurred.
(c_value_of_variable): Delay check of variable's validity
until later. We actually want all structs and unions to have
the value "{...}".
Do not return "???" for variables which could not be evaluated.
This error condition must be returned to the caller so that it
can get the error condition from gdb.
(cplus_name_of_child): Adjust index for vptr before figuring
out the name of the child.
(cplus_value_of_child): If a child's (real) parent is not valid,
don't even bother trying to give a value for it. Just return
an error. Change all instances in this function.
(cplus_type_of_child): If our parent is one of the "fake"
parents, we need to get at the type of the real parent, and
derive the child's true type using this information.
2002-01-13 Andrew Cagney <ac131313@redhat.com>
From 2002-01-09 John Marshall <johnm@falch.net>:
* CONTRIBUTE, README, TODO: Change sourceware.cygnus.com to
sources.redhat.com, and tweak some related URLs which had
suffered from linkrot.
2002-01-13 Andrew Cagney <ac131313@redhat.com>
From Jeff law:
* hppa-tdep.c (hppa_push_arguments): Correct handling of 5-7 byte
structures passed in registers.
2002-01-13 Eli Zaretskii <eliz@is.elta.co.il>
* go32-nat.c (save_npx) [__DJGPP_MINOR__ < 3]: Remove extraneous
white space which prevented compilation. Reported by DSK
<dsk@student.unsw.edu.au>.
2002-01-11 Michael Snyder <msnyder@redhat.com>
* symfile.c (build_section_addr_info_from_section_tab):
Use bfd access method instead of manipulating bfd directly.
(syms_from_objfile): Ditto.
(simple_overlay_update_1): Ditto.
(simple_overlay_update): Ditto.
(generic_load): Ditto.
(overlay_unmapped_address): FIXME comment, bfd access methods.
(sections_overlap): FIXME comment, bfd access methods.
(pc_in_mapped_range): FIXME comment, bfd access methods.
(pc_in_unmapped_range): FIXME comment, bfd access methods.
(section_is_mapped): FIXME comment, bfd access methods.
(section_is_overlay): FIXME comment, bfd access methods.
* symfile.c (generic_load): Whitespace and long line cleanups.
Remove duplicate variable, change several local variables to
more appropriate data types.
(print_transfer_performance): Use %lu instead of %ld for ulongs.
2002-01-12 20:00:07 +00:00
2002-01-12 Andrew Cagney <ac131313@redhat.com>
From Peter Schauer:
* language.c (longest_local_hex_string_custom): Use phex_nz to
convert NUM to a hex string.
2002-01-12 Elena Zannoni <ezannoni@redhat.com>
* sh-tdep.c (sh_gdbarch_init): Move setting of long_bit earlier in
the function.
2002-01-12 16:38:47 +00:00
Update Copyright year.
2002-01-12 Andrew Cagney <ac131313@redhat.com>
* language.c (longest_raw_hex_string): Delete unused function.
2002-01-11 Petr Sorfa <petrs@caldera.com>
* MAINTAINERS (write-after-approval): Add myself.
* dwarf2read.c (read_tag_string_type): Handling of
DW_AT_byte_size.
(read_tag_string_type): FORTRAN fix to prevent propagation of
first string size.
(set_cu_language): Handling of DW_LANG_Fortran95
2002-01-11 Richard Earnshaw <rearnsha@arm.com>
* armnbsd-nat.c (fetch_inferior_registers): Change inferior_pid ->
GETPID(inferior_ptid).
(store_inferior_registers): Likewise.
2002-01-10 Jason Merrill <jason@redhat.com>
* dwarf2read.c (decode_locdesc): Implement DW_OP_litn, DW_OP_dup.
Fix DW_OP_minus.
2002-01-10 Andrew Cagney <ac131313@redhat.com>
* config/djgpp/fnchange.lst: Add renames for bfd/ChangeLog-0001
and bfd/elf32-sh-nbsd.c.
2002-01-10 Michael Snyder <msnyder@redhat.com>
* NEWS: Mention --pid and corefile/proc-id behavior change.
* Makefile.in: Add rules for gcore.o and linux-proc.o.
* gcore.c: Include cli/cli-decode.h instead of command.h.
* main.c (captured_main): Add new command line option "--pid".
If the second command line argument (following the symbol-file)
begins with a digit, try to attach to it before trying to open
it as a corefile.
(print_gdb_help): Document the "--pid" argument.
2002-01-10 Eli Zaretskii <eliz@is.elta.co.il>
* completer.c (command_completer): New function.
* completer.h <command_completer>: Add prototype.
* cli/cli-cmds.c (init_cli_cmds): Make command_completer be the
completer for the "help" command.
2002-01-09 Jason Merrill <jason@redhat.com>
* c-typeprint.c (is_type_conversion_operator): Fix thinko.
2002-01-09 Michael Snyder <msnyder@redhat.com>
* i386-linux-nat.c (fill_fpxregset): Make global.
(store_fpxregset): Ditto.
* gregset.h (gdb_fpxregset_t): Define.
(supply_fpxregset): Prototype.
(fill_fpxregset): Prototype.
* exec.c (exec_make_note_section): Don't call elfcore_write_prpsinfo.
2002-01-09 Richard Earnshaw <rearnsha@arm.com>
* config/arm/arm-tdep.h (arm_software_single_step): Remove PARAMS.
* config/arm/nm-nbsd.h (arm_register_u_addr): Likewise.
* config/arm/tm-nbsd.h (get_longjmp_target): Likewise.
2002-01-09 18:33:21 +00:00
2002-01-09 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Update target maintainer rules so that any
Maintainer can approve a tested patch for a maintenance-only
target.
2002-01-09 Richard Earnshaw <rearnsha@arm.com>
* MAINTAINERS (write-after-approval): Add myself.
* arm-tdep.c (arm_init_extra_frame_info): Cast NULL argument to
IN_SIGTRAMP.
2002-01-08 Michael Snyder <msnyder@redhat.com>
* linux-proc.c (child_pid_to_exec_file): Use readlink to get the
real name of the executable, rather than the /proc name.
2002-01-03 Michael Snyder <msnyder@redhat.com> Implement a "generate-core-file" command in gdb, save target state. * gcore.c: New file. Implement new command 'generate-core-file'. Save a corefile image of the current state of the inferior. * linux-proc.c: Add linux-specific code for saving corefiles. * target.h (struct target_ops): Add new target vectors for saving corefiles; to_find_memory_regions and to_make_corefile_notes. (target_find_memory_regions): New macro. (target_make_corefile_notes): New macro. * target.c (update_current_target): Inherit new target methods. (dummy_find_memory_regions): New place-holder method. (dummy_make_corefile_notes): New place-holder method. (init_dummy_target): Initialize new dummy target vectors. * exec.c (exec_set_find_memory_regions): New function. Allow the exec_ops vector for memory regions to be taken over. (exec_make_note_section): New function, target vector method. * defs.h (exec_set_find_memory_regions): Export prototype. * procfs.c (proc_find_memory_regions): New function, corefile method. (procfs_make_note_section): New function, corefile method. (init_procfs_ops): Set new target vector pointers. (find_memory_regions_callback): New function. (procfs_do_thread_registers): New function. (procfs_corefile_thread_callback): New function. * sol-thread.c (sol_find_memory_regions): New function. (sol_make_note_section): New function. (init_sol_thread_ops): Initialize new target vectors. * inftarg.c (inftarg_set_find_memory_regions): New function. Allow to_find_memory_regions vector to be taken over. (inftarg_set_make_corefile_notes): New function. Allow to_make_corefile_notes vector to be taken over. * thread-db.c (thread_db_new_objfile): Don't activate thread-db interface layer if not target_has_execution (may be a corefile). * config/i386/linux.mh: Add gcore.o to NATDEPFILES. * config/sparc/sun4sol2.mh: Ditto. * config/alpha/alpha-linux.mh: Ditto. * config/arm/linux.mh: Ditto. * config/i386/x86-64linux.mh: Ditto. * config/ia64/linux.mh: Ditto. * config/m68k/linux.mh: Ditto. * config/mips/linux.mh: Ditto. * config/powerpc/linux.mh: Ditto. * config/sparc/linux.mh: Ditto.
2002-01-09 00:37:02 +00:00
2002-01-03 Michael Snyder <msnyder@redhat.com>
Implement a "generate-core-file" command in gdb, save target state.
* gcore.c: New file. Implement new command 'generate-core-file'.
Save a corefile image of the current state of the inferior.
* linux-proc.c: Add linux-specific code for saving corefiles.
* target.h (struct target_ops): Add new target vectors for saving
corefiles; to_find_memory_regions and to_make_corefile_notes.
(target_find_memory_regions): New macro.
(target_make_corefile_notes): New macro.
* target.c (update_current_target): Inherit new target methods.
(dummy_find_memory_regions): New place-holder method.
(dummy_make_corefile_notes): New place-holder method.
(init_dummy_target): Initialize new dummy target vectors.
* exec.c (exec_set_find_memory_regions): New function.
Allow the exec_ops vector for memory regions to be taken over.
(exec_make_note_section): New function, target vector method.
* defs.h (exec_set_find_memory_regions): Export prototype.
* procfs.c (proc_find_memory_regions): New function, corefile method.
(procfs_make_note_section): New function, corefile method.
(init_procfs_ops): Set new target vector pointers.
(find_memory_regions_callback): New function.
(procfs_do_thread_registers): New function.
(procfs_corefile_thread_callback): New function.
* sol-thread.c (sol_find_memory_regions): New function.
(sol_make_note_section): New function.
(init_sol_thread_ops): Initialize new target vectors.
* inftarg.c (inftarg_set_find_memory_regions): New function.
Allow to_find_memory_regions vector to be taken over.
(inftarg_set_make_corefile_notes): New function.
Allow to_make_corefile_notes vector to be taken over.
* thread-db.c (thread_db_new_objfile): Don't activate thread-db
interface layer if not target_has_execution (may be a corefile).
* config/i386/linux.mh: Add gcore.o to NATDEPFILES.
* config/sparc/sun4sol2.mh: Ditto.
* config/alpha/alpha-linux.mh: Ditto.
* config/arm/linux.mh: Ditto.
* config/i386/x86-64linux.mh: Ditto.
* config/ia64/linux.mh: Ditto.
* config/m68k/linux.mh: Ditto.
* config/mips/linux.mh: Ditto.
* config/powerpc/linux.mh: Ditto.
* config/sparc/linux.mh: Ditto.
2002-01-07 Michael Snyder <msnyder@redhat.com>
* arm-linux-nat.c: Remove references to regcache.c internal data
(registers[] and register_valid[]).
2002-01-07 Michael Snyder <msnyder@redhat.com>
* linux-proc.c: New file. Implement child_pid_to_exec_file,
so that attaching to a pid will automatically read the process's
symbol file and shlibs.
* Makefile.in: Add rule for linux-proc.o.
* config/nm-linux.h: Define CHILD_PID_TO_EXEC_FILE.
* config/alpha/alpha-linux.mh: Add linux-proc.o to NATDEPFILES.
* config/arm/linux.mh: Ditto.
* config/i386/linux.mh: Ditto.
* config/i386/x86-64linux.mh: Ditto.
* config/ia64/linux.mh: Ditto.
* config/m68k/linux.mh: Ditto.
* config/mips/linux.mh: Ditto.
* config/powerpc/linux.mh: Ditto.
* config/sparc/linux.mh: Ditto.
2002-01-06 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c: Add i386-tdep.h dependency.
2002-01-07 Michael Snyder <msnyder@redhat.com>
* solib.c (info_sharedlibrary_command): Use TARGET_PTR_BIT
instead of bfd_get_arch_size. Don't bail out just because
there's no exec_bfd.
* cp-valprint.c (cp_print_value): FIXME comment, alloca size.
* p-valprint.c (pascal_object_print_value): Ditto.
* somread.c (som_symtab_read): Ditto.
* symfile.c (simple_free_overlay_region_table): Ditto.
* valops.c (value_assign): Ditto.
* tracepoint.c (tracepoint_save_command): From Klee Dienes --
use tilde_expand and strerror for opening save-tracepoints file.
* thread-db.c (thread_db_new_objfile): Indendation fix.
* infptrace.c (GDB_MAX_ALLOCA): New define.
(child_xfer_memory): Use xmalloc/xfree instead of alloca if the
size of the buffer exceeds GDB_MAX_ALLOCA (default 1 megabyte,
can be overridden with whatever value is appropriate to the host).
* infttrace.c (child_xfer_memory): Add FIXME warning about use of
alloca to allocate potentially large buffer.
* rs6000-nat.c (child_xfer_memory): Ditto.
* symm-nat.c (child_xfer_memory): Ditto.
* x86-64-linux-nat.c (child_xfer_memory): Ditto.
2002-01-07 Jackie Smith Cashion <jsmith@redhat.com>
From Nick Clifton <nickc@redhat.com>
* d10v-tdep.c: Set STACK_START to 0x200bffe.
2002-01-07 Michael Snyder <msnyder@redhat.com>
* solib-legacy.c (legacy_svr4_fetch_link_map_offsets):
Don't use exec_bfd if it's NULL.
2002-01-06 Mark Kettenis <kettenis@gnu.org>
* valops.c (value_arg_coerce): Fix formatting.
2002-01-06 19:18:28 +00:00
2002-01-06 Andrew Cagney <ac131313@redhat.com>
* hp-psymtab-read.c: Include "gdb_string.h" instead of <string.h>.
* gnu-nat.c: Ditto.
2002-01-06 19:10:24 +00:00
2002-01-06 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Note that alpha-dec-osf4.0a, arc-elf, arm-coff,
arm-elf, arm-pe, d30v-elf, fr30-elf, h8300hms, h8500hms,
i960-coff, m32r-elf, m68k-elf, m88k, mcore-elf, mn10200-elf,
ns32k-netbsd, hppa1.1-hp-proelf, v850-elf, vax-dec-vms5.5 and
z8k-coff have not been multi-arched. Update z8k-coff build
status.
2002-01-06 Andrew Cagney <ac131313@redhat.com>
* MAINTAINERS: Mark a29k target as obsolete.
* Makefile.in (a29k-tdep.o, remote-adapt.o, remote-eb.o)
(remote-mm.o, remote-udi.o): Obsolete. Remove references in
comments.
* NEWS: Note that a29k targets are obsolete.
* a29k-tdep.c: Mark as obsolete.
* configure.tgt: Mark a29k-*-aout*, a29k-*-coff*, a29k-*-elf*,
a29k-*-ebmon*, a29k-*-kern*, a29k-*-none*, a29k-*-udi* and
a29k-*-vxworks* targets as obsolete.
* remote-adapt.c: Obsolete.
* remote-eb.c: Obsolete.
* remote-mm.c: Obsolete.
* remote-udi.c: Obsolete.
* config/a29k/a29k-udi.mt: Obsolete.
* config/a29k/a29k.mt: Obsolete.
* config/a29k/tm-a29k.h: Obsolete.
* config/a29k/tm-vx29k.h: Obsolete.
* config/a29k/vx29k.mt: Obsolete.
2002-01-06 04:50:56 +00:00
2002-01-05 Andrew Cagney <ac131313@redhat.com>
* rs6000-tdep.c (rs6000_do_registers_info): Replace BIG_ENDIAN
with BFD_ENDIAN_BIG.
2002-01-05 22:06:38 +00:00
2002-01-05 Andrew Cagney <ac131313@redhat.com>
* configure.in (AC_CHECK_HEADERS): Do not check for <endian.h>.
* configure, config.in: Re-generate.
* config/vax/xm-vaxbsd.h: Do not include <machine/endian.h>.
* defs.h: Do not include <endian.h>.
2002-01-05 Jason Thorpe <thorpej@wasabisystems.com>
* acconfig.h (HAVE_PT_GETXMMREGS): New.
* config.in: Regenerate.
* configure.in: Update copyright years.
Add test for PT_GETXMMREGS supplied by <sys/ptrace.h>.
* configure: Regenerate.
* i386bsd-nat.c: Update copyright years.
(fill_gregset): Use regcache_collect.
(fetch_inferior_registers): Only fetch integer registers
if requested to do so. Add support for XMM registers
using PT_GETXMMREGS.
(store_inferior_registers): Only store integer registers
if requested to do so. Add support for XMM registers
using PT_SETXMMREGS.
* i386nbsd-nat.c (fetch_inferior_registers): Remove.
(store_inferior_registers): Remove.
(fetch_core_registers): Use supply_gregset and i387_supply_fsave.
(fetch_elfcore_registers): New function.
(i386nbsd_elfcore_fns): New.
(_initialize_i386nbsd_nat): Register i386nbsd_elfcore_fns.
* config/i386/nbsd.mh (NATDEPFILES): Add i387-nat.o and
i386bsd-nat.o.
* config/i386/nbsdelf.mh (NATDEPFILES): Likewise.
* config/i386/nbsd.mt (TDEPFILES): Add i386bsd-nat.o.
* config/i386/nbsdelf.mt (TDEPFILES): Likewise.
* config/i386/tm-nbsd.h: Update copyright years.
(HAVE_SSE_REGS): Define.
(IN_SIGTRAMP): Define as i386bsd_in_sigtramp.
(SIGTRAMP_START): Redefine as i386bsd_sigtramp_start.
(SIGTRAMP_END): Redefine as i386bsd_sigtramp_end.
(SIGCONTEXT_PC_OFFSET): Remove.
(FRAME_SAVED_PC): Define as i386bsd_frame_saved_pc.
2002-01-05 05:54:31 +00:00
2002-01-05 Andrew Cagney <ac131313@redhat.com>
* configure.tgt: Remove powerpc-*-macos* target.
* config/m68k/xm-mpw.h: Delete file.
* config/xm-mpw.h: Delete file.
* ser-mac.c: Delete file.
* mpw-make.sed: Delete file.
* mpw-config.in: Delete file.
* mac-xdep.c: Delete file.
* mac-gdb.r: Delete file.
* mac-defs.h: Delete file.
* mac-nat.c: Delete file.
* config/powerpc/macos.mh: Delete file.
* config/powerpc/macos.mt: Delete file.
* config/powerpc/nm-macos.h: Delete file.
* config/powerpc/tm-macos.h: Delete file.
* source.c (openp, open_source_file): Remove obsolete code.
* top.c (gdb_readline): Ditto.
* utils.c (query): Ditto.
* event-top.c (display_gdb_prompt): Ditto.
* Makefile.in (ser-mac.o): Delete obsolete target.
* NEWS: Update.
2002-01-05 04:30:46 +00:00
2002-01-04 Andrew Cagney <ac131313@redhat.com>
* defs.h (BIG_ENDIAN): Delete macro definition.
* a29k-tdep.c, arch-utils.c, arm-tdep.c, ax-gdb.c, ch-exp.c,
coffread.c, cris-tdep.c, d10v-tdep.c, d30v-tdep.c, defs.h,
findvar.c, infcmd.c, mem-break.c, mips-tdep.c, mn10300-tdep.c,
printcmd.c, remote-os9k.c, remote-rdi.c, remote-rdp.c,
remote-sim.c, remote.c, rs6000-tdep.c, sh-tdep.c, sparcl-tdep.c,
stabsread.c, valops.c, valprint.c, config/a29k/tm-a29k.h,
config/a29k/tm-vx29k.h, config/arm/tm-arm.h,
config/d30v/tm-d30v.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
config/m32r/tm-m32r.h, config/m68k/tm-m68k.h,
config/m88k/tm-m88k.h, config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/z8k/tm-z8k.h, mi/mi-cmd-disas.c,
mi/mi-main.c: Replace BIG_ENDIAN with BFD_ENDIAN_BIG.
* gdbarch.sh: Replace BIG_ENDIAN with BFD_ENDIAN_BIG.
* gdbarch.c: Re-generate.
2002-01-04 Daniel Jacobowitz <drow@mvista.com>
* thread-db.c (thread_db_new_objfile): Do not enable thread_db
for core files.
2002-01-04 Jason Thorpe <thorpej@wasabisystems.com>
* config/arm/nbsd.mh (XDEPFILES): Remove ser-tcp.o.
2002-01-04 Andrew Cagney <ac131313@redhat.com>
* value.h (value_ptr): Delete typedef.
2002-01-04 Jason Thorpe <thorpej@wasabisystems.com>
* i386nbsd-nat.c: Update copyright years.
Include i386-tdep.h.
2002-01-04 Elena Zannoni <ezannoni@redhat.com>
* stabsread.c: Update copyright years.
From Debashis Mahata <debashis.mahata@wipro.com>:
(read_struct_fields): Deal with Sun C compiler erroneous stab
output for structs and unions.
2002-01-04 19:55:08 +00:00
Fix PR gdb/269.
2002-01-04 Daniel Jacobowitz <drow@mvista.com>
* p-valprint.c: Include "cp-abi.h" for baseclass_offset
prototype.
2002-01-04 Daniel Jacobowitz <drow@mvista.com>
* cp-abi.c: Fix whitespace.
(baseclass_offset): New wrapper function.
* cp-abi.h (baseclass_offset): Add prototype.
(struct cp_abi_ops): Add baseclass_offset pointer.
* valops.c (vb_match): Move to...
* gnu-v2-abi.c (vb_match): here.
* valops.c (baseclass_offset): Move to...
* gnu-v2-abi.c (gnuv2_baseclass_offset): here, and rename.
* gnu-v3-abi.c (gnuv3_baseclass_offset): New function.
* gnu-v2-abi.c (init_gnuv2_ops): Initialize baseclass_offset.
* gnu-v3-abi.c (init_gnuv3_ops): Likewise.
* hpacc-abi.c (init_hpacc_ops): Likewise.
2002-01-04 Daniel Jacobowitz <drow@mvista.com>
* valops.c (find_overload_match): Accept obj as a
reference parameter. Update it before returning.
* value.h (find_overload_match): Update prototype.
* eval.c (evaluate_subexp_standard): Pass object to
find_overload_match by reference.
2002-01-04 05:20:09 +00:00
2002-01-03 Andrew Cagney <ac131313@redhat.com>
* valarith.c: Replace value_ptr with struct value pointer. Remove
register attribute from value declarations.
* valops.c: Ditto.
* value.h: Ditto.
* scm-lang.c (scm_lookup_name): Ditto.
2002-01-06 04:37:53 +00:00
2002-01-03 Michael Snyder <msnyder@redhat.com>
2002-01-06 04:37:53 +00:00
Abstract the functionality of iterating over mapped memory
regions into a general purpose iterator function.
* procfs.c (iterate_over_mappings): New function, general purpose
2002-01-06 04:37:53 +00:00
iterator for memory sections.
(proc_iterate_over_mappings): Reimplement using iterate_over_mappings.
(solib_mappings_callback): New function, callback for above.
(info_proc_mappings): Reimpliment using iterate_over_mappings.
(info_mappings_callback): New function, callback for above.
* procfs.c (proc_set_watchpoint): Add cast to suppress warning.
2002-01-01 Mark Kettenis <kettenis@gnu.org>
* i386-tdep.h (struct gdbarch_tdep): Add `os_ident' member.
* i386-tdep.c: Include "elf-bfd.h".
(process_note_abi_tag_sections): New function.
(i386_gdbarch_init): Add code to recognize various OS/ABI
combinations.
* maint.c (_initialize_maint_cmds): Add missing \ in
string-literal.
2002-01-03 06:02:43 +00:00
For older changes see ChangeLog-2001
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: