old-cross-binutils/gdb/ser-pipe.c

238 lines
5.7 KiB
C
Raw Normal View History

1999-07-12 18:08:43 +00:00
/* Serial interface for a pipe to a separate program
Copyright (C) 1999-2013 Free Software Foundation, Inc.
1999-07-12 18:08:43 +00:00
Contributed by Cygnus Solutions.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
1999-07-12 18:08:43 +00:00
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
1999-07-12 18:08:43 +00:00
#include "defs.h"
#include "serial.h"
* Makefile.in (SFILES): Add ser-base.c. (ser_base_h): New variable. (ser-base.o): New target. (ser-pipe.o): Depend on $(ser_base_h). (ser-tcp.o): Likewise. (ser-unix.o): Likewise. Do not depend on $(event_loop_h). * configure.ac (SER_HARDWIRE): Include ser-base.o where appropriate. * ser-base.c: New file. (push_event): Move from ser-unix.c. (fd_event): Likewise. (reschedule): Likewise. (ser_unix_write): Likewise. (ser_unix_nop_flush_output): Likewise. (ser_unix_flush_input): Likewise. (ser_unix_nop_send_break): Likewise. (ser_unix_nop_drain_output): Likewise. (ser_unix_nop_raw): Likewise. (ser_unix_nop_get_tty_state): Likewise. (ser_unix_nop_set_tty_state): Likewise. (ser_unix_nop_noflush_set_tty_state): Likewise. (ser_unix_nop_print_tty_state): Likewise. (ser_unix_nop_setbaudrate): Likewise. (ser_unix_nop_setstopbits): Likewise. (ser_unix_async): Likewise. * ser-base.h: New file. * ser-pipe.c (ser-base.h): Include it. * ser-tcp.c (ser-base.h): Likewise. * ser-unix.h (ser_unix_nop_flush_output): Remove. (ser_unix_flush_input): Likewise. (ser_unix_nop_send_break): Likewise. (ser_unix_nop_raw): Likewise. (ser_unix_nop_get_tty_state): Likewise. (ser_unix_nop_set_tty_state): Likewise. (ser_unix_nop_print_tty_state): Likewise. (ser_unix_nop_noflush_set_tty_state): Likewise. (ser_unix_nop_setbaudrate): Likewise. (ser_unix_nop_setstopbits): Likewise. (ser_unix_nop_drain_output): Likewise. (ser_unix_wait_for): Likewise. (ser_unix_write): Likewise. (ser_unix_async): Likewise. * ser-unix.c (event-loop.h): Do not include it. (push_event): Move to ser-base.c. (fd_event): Likewise. (reschedule): Likewise. (ser_unix_write): Likewise. (ser_unix_nop_flush_output): Likewise. (ser_unix_flush_input): Likewise. (ser_unix_nop_send_break): Likewise. (ser_unix_nop_drain_output): Likewise. (ser_unix_nop_raw): Likewise. (ser_unix_nop_get_tty_state): Likewise. (ser_unix_nop_set_tty_state): Likewise. (ser_unix_nop_noflush_set_tty_state): Likewise. (ser_unix_nop_print_tty_state): Likewise. (ser_unix_nop_setbaudrate): Likewise. (ser_unix_nop_setstopbits): Likewise. (ser_unix_async): Likewise. (ser_unix_wait_for): Make it static. * configure: Regenerated.
2005-03-25 19:47:23 +00:00
#include "ser-base.h"
1999-09-22 03:28:34 +00:00
#include "ser-unix.h"
2001-01-31 02:08:23 +00:00
#include "gdb_vfork.h"
1999-07-12 18:08:43 +00:00
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/time.h>
#include <fcntl.h>
#include "gdb_string.h"
PR gdb/7912: * Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
#include "filestuff.h"
1999-07-12 18:08:43 +00:00
#include <signal.h>
1999-07-12 18:08:43 +00:00
2001-07-11 17:52:32 +00:00
static int pipe_open (struct serial *scb, const char *name);
static void pipe_close (struct serial *scb);
1999-07-19 23:30:11 +00:00
1999-09-22 03:28:34 +00:00
extern void _initialize_ser_pipe (void);
1999-07-19 23:30:11 +00:00
struct pipe_state
{
int pid;
};
/* Open up a raw pipe. */
1999-07-12 18:08:43 +00:00
static int
2001-07-11 17:52:32 +00:00
pipe_open (struct serial *scb, const char *name)
1999-07-12 18:08:43 +00:00
{
1999-10-05 23:13:56 +00:00
#if !HAVE_SOCKETPAIR
1999-07-12 18:08:43 +00:00
return -1;
#else
1999-07-19 23:30:11 +00:00
struct pipe_state *state;
1999-07-12 18:08:43 +00:00
/* This chunk: */
/* Copyright (c) 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software written by Ken Arnold and
* published in UNIX Review, Vol. 6, No. 8.
*/
int pdes[2];
int err_pdes[2];
1999-07-12 18:08:43 +00:00
int pid;
PR gdb/7912: * Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
if (gdb_socketpair_cloexec (AF_UNIX, SOCK_STREAM, 0, pdes) < 0)
1999-07-12 18:08:43 +00:00
return -1;
PR gdb/7912: * Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
if (gdb_socketpair_cloexec (AF_UNIX, SOCK_STREAM, 0, err_pdes) < 0)
{
close (pdes[0]);
close (pdes[1]);
return -1;
}
1999-07-12 18:08:43 +00:00
/* Create the child process to run the command in. Note that the
apparent call to vfork() below *might* actually be a call to
fork() due to the fact that autoconf will ``#define vfork fork''
on certain platforms. */
1999-07-19 23:30:11 +00:00
pid = vfork ();
/* Error. */
1999-07-19 23:30:11 +00:00
if (pid == -1)
1999-07-12 18:08:43 +00:00
{
close (pdes[0]);
close (pdes[1]);
close (err_pdes[0]);
close (err_pdes[1]);
1999-07-12 18:08:43 +00:00
return -1;
1999-07-19 23:30:11 +00:00
}
if (fcntl (err_pdes[0], F_SETFL, O_NONBLOCK) == -1)
{
close (err_pdes[0]);
close (err_pdes[1]);
err_pdes[0] = err_pdes[1] = -1;
}
/* Child. */
1999-07-19 23:30:11 +00:00
if (pid == 0)
{
/* We don't want ^c to kill the connection. */
#ifdef HAVE_SETSID
pid_t sid = setsid ();
if (sid == -1)
signal (SIGINT, SIG_IGN);
#else
signal (SIGINT, SIG_IGN);
#endif
/* Re-wire pdes[1] to stdin/stdout. */
1999-07-12 18:08:43 +00:00
close (pdes[0]);
if (pdes[1] != STDOUT_FILENO)
{
dup2 (pdes[1], STDOUT_FILENO);
close (pdes[1]);
}
dup2 (STDOUT_FILENO, STDIN_FILENO);
if (err_pdes[0] != -1)
{
close (err_pdes[0]);
dup2 (err_pdes[1], STDERR_FILENO);
close (err_pdes[1]);
}
PR gdb/7912: * Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
close_most_fds ();
execl ("/bin/sh", "sh", "-c", name, (char *) 0);
1999-07-12 18:08:43 +00:00
_exit (127);
}
/* Parent. */
1999-07-12 18:08:43 +00:00
close (pdes[1]);
if (err_pdes[1] != -1)
close (err_pdes[1]);
1999-07-19 23:30:11 +00:00
/* :end chunk */
state = XMALLOC (struct pipe_state);
state->pid = pid;
1999-07-12 18:08:43 +00:00
scb->fd = pdes[0];
scb->error_fd = err_pdes[0];
1999-07-19 23:30:11 +00:00
scb->state = state;
1999-07-12 18:08:43 +00:00
/* If we don't do this, GDB simply exits when the remote side dies. */
signal (SIGPIPE, SIG_IGN);
return 0;
#endif
}
static void
2001-07-11 17:52:32 +00:00
pipe_close (struct serial *scb)
1999-07-12 18:08:43 +00:00
{
1999-07-19 23:30:11 +00:00
struct pipe_state *state = scb->state;
close (scb->fd);
scb->fd = -1;
1999-07-19 23:30:11 +00:00
if (state != NULL)
{
int wait_result, status;
/* Don't kill the task right away, give it a chance to shut down cleanly.
But don't wait forever though. */
#define PIPE_CLOSE_TIMEOUT 5
/* Assume the program will exit after SIGTERM. Might be
useful to print any remaining stderr output from
scb->error_fd while waiting. */
#define SIGTERM_TIMEOUT INT_MAX
wait_result = -1;
#ifdef HAVE_WAITPID
wait_result = wait_to_die_with_timeout (state->pid, &status,
PIPE_CLOSE_TIMEOUT);
#endif
if (wait_result == -1)
{
kill (state->pid, SIGTERM);
#ifdef HAVE_WAITPID
wait_to_die_with_timeout (state->pid, &status, SIGTERM_TIMEOUT);
#endif
}
if (scb->error_fd != -1)
close (scb->error_fd);
scb->error_fd = -1;
2000-12-15 01:01:51 +00:00
xfree (state);
1999-07-19 23:30:11 +00:00
scb->state = NULL;
}
1999-07-12 18:08:43 +00:00
}
int
gdb_pipe (int pdes[2])
{
#if !HAVE_SOCKETPAIR
errno = ENOSYS;
return -1;
#else
PR gdb/7912: * Makefile.in (SFILES): Add filestuff.c (COMMON_OBS): Add filestuff.o. (filestuff.o): New target. * auto-load.c (auto_load_objfile_script_1): Use gdb_fopen_cloexec. * auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec. * cli/cli-cmds.c (shell_escape): Call close_most_fds. * cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec. * common/agent.c (gdb_connect_sync_socket): Use gdb_socket_cloexec. * common/filestuff.c: New file. * common/filestuff.h: New file. * common/linux-osdata.c (linux_common_core_of_thread) (command_from_pid, commandline_from_pid, print_source_lines) (linux_xfer_osdata_shm, linux_xfer_osdata_sem) (linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use gdb_fopen_cloexec. * common/linux-procfs.c (linux_proc_get_int) (linux_proc_pid_has_state): Use gdb_fopen_cloexec. * config.in, configure: Rebuild. * configure.ac: Don't check for sys/socket.h. Check for fdwalk, pipe2. * corelow.c (core_open): Use gdb_open_cloexec. * dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec. * fork-child.c (fork_inferior): Call close_most_fds. * gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec. * inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec. * linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals): Use gdb_fopen_cloexec. (linux_proc_xfer_partial, linux_proc_xfer_spu): Use gdb_open_cloexec. (linux_async_pipe): Use gdb_pipe_cloexec. * remote-fileio.c (remote_fileio_func_open): Use gdb_open_cloexec. * remote.c (remote_file_put, remote_file_get): Use gdb_fopen_cloexec. * ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec, close_most_fds. * ser-tcp.c (net_open): Use gdb_socket_cloexec. * ser-unix.c (hardwire_open): Use gdb_open_cloexec. * solib.c (solib_find): Use gdb_open_cloexec. * source.c (openp, find_and_open_source): Use gdb_open_cloexec. * tracepoint.c (tfile_start): Use gdb_fopen_cloexec. (tfile_open): Use gdb_open_cloexec. * tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec. * ui-file.c (gdb_fopen): Use gdb_fopen_cloexec. * xml-support.c (xml_fetch_content_from_file): Use gdb_fopen_cloexec. * main.c (captured_main): Call notice_open_fds. gdbserver * Makefile.in (SFILES): Add filestuff.c. (OBS): Add filestuff.o. (filestuff.o): New target. * config.in, configure: Rebuild. * configure.ac: Check for fdwalk, pipe2.
2013-04-22 16:46:15 +00:00
if (gdb_socketpair_cloexec (AF_UNIX, SOCK_STREAM, 0, pdes) < 0)
return -1;
/* If we don't do this, GDB simply exits when the remote side
dies. */
signal (SIGPIPE, SIG_IGN);
return 0;
#endif
}
1999-07-12 18:08:43 +00:00
void
1999-09-22 03:28:34 +00:00
_initialize_ser_pipe (void)
1999-07-12 18:08:43 +00:00
{
1999-09-22 03:28:34 +00:00
struct serial_ops *ops = XMALLOC (struct serial_ops);
memset (ops, 0, sizeof (struct serial_ops));
1999-09-22 03:28:34 +00:00
ops->name = "pipe";
ops->next = 0;
ops->open = pipe_open;
ops->close = pipe_close;
ops->readchar = ser_base_readchar;
* ser-base.c (ser_unix_write): Rename to ... (ser_base_write): ... this. (ser_unix_nop_flush_output): Rename to ... (ser_base_flush_output): ... this. (ser_unix_flush_input): Rename to ... (ser_base_flush_input): ... this. (ser_unix_nop_send_break): Rename to ... (ser_base_send_break): ... this. (ser_unix_nop_drain_output): Rename to ... (ser_base_drain_output): ... this. (ser_unix_nop_raw): Rename to ... (ser_base_raw): ... this. (ser_unix_nop_get_tty_state): Rename to ... (ser_base_set_tty_state): ... this. (ser_unix_nop_noflush_set_tty_state): Rename to ... (ser_base_noflush_set_tty_state): ... this. (ser_unix_nop_print_tty_state): Rename to ... (ser_base_print_tty_state): ... this. (ser_unix_nop_setbaudrate): Rename to ... (ser_base_setbaudrate): ... this. (ser_unix_nop_setstopbits): Rename to ... (ser_base_setstopbits): ... this. (ser_unix_async): Rename to ... (ser_base_async): ... this. * ser-base.h (ser_unix_write): Rename to ... (ser_base_write): ... this. (ser_unix_nop_flush_output): Rename to ... (ser_base_flush_output): ... this. (ser_unix_flush_input): Rename to ... (ser_base_flush_input): ... this. (ser_unix_nop_send_break): Rename to ... (ser_base_send_break): ... this. (ser_unix_nop_drain_output): Rename to ... (ser_base_drain_output): ... this. (ser_unix_nop_raw): Rename to ... (ser_base_raw): ... this. (ser_unix_nop_get_tty_state): Rename to ... (ser_base_set_tty_state): ... this. (ser_unix_nop_noflush_set_tty_state): Rename to ... (ser_base_noflush_set_tty_state): ... this. (ser_unix_nop_print_tty_state): Rename to ... (ser_base_print_tty_state): ... this. (ser_unix_nop_setbaudrate): Rename to ... (ser_base_setbaudrate): ... this. (ser_unix_nop_setstopbits): Rename to ... (ser_base_setstopbits): ... this. (ser_unix_async): Rename to ... (ser_base_async): ... this. * ser-pipe.c (_initialize_ser_pipe): Update accordingly. * ser-tcp.c (_initialize_ser_tcp): Likewise. * ser-unix.c (hardwire_flush_input): Likewise. (_initializer_ser_hardwire): Likewise.
2005-03-25 20:06:36 +00:00
ops->write = ser_base_write;
ops->flush_output = ser_base_flush_output;
ops->flush_input = ser_base_flush_input;
ops->send_break = ser_base_send_break;
ops->go_raw = ser_base_raw;
ops->get_tty_state = ser_base_get_tty_state;
ops->copy_tty_state = ser_base_copy_tty_state;
* ser-base.c (ser_unix_write): Rename to ... (ser_base_write): ... this. (ser_unix_nop_flush_output): Rename to ... (ser_base_flush_output): ... this. (ser_unix_flush_input): Rename to ... (ser_base_flush_input): ... this. (ser_unix_nop_send_break): Rename to ... (ser_base_send_break): ... this. (ser_unix_nop_drain_output): Rename to ... (ser_base_drain_output): ... this. (ser_unix_nop_raw): Rename to ... (ser_base_raw): ... this. (ser_unix_nop_get_tty_state): Rename to ... (ser_base_set_tty_state): ... this. (ser_unix_nop_noflush_set_tty_state): Rename to ... (ser_base_noflush_set_tty_state): ... this. (ser_unix_nop_print_tty_state): Rename to ... (ser_base_print_tty_state): ... this. (ser_unix_nop_setbaudrate): Rename to ... (ser_base_setbaudrate): ... this. (ser_unix_nop_setstopbits): Rename to ... (ser_base_setstopbits): ... this. (ser_unix_async): Rename to ... (ser_base_async): ... this. * ser-base.h (ser_unix_write): Rename to ... (ser_base_write): ... this. (ser_unix_nop_flush_output): Rename to ... (ser_base_flush_output): ... this. (ser_unix_flush_input): Rename to ... (ser_base_flush_input): ... this. (ser_unix_nop_send_break): Rename to ... (ser_base_send_break): ... this. (ser_unix_nop_drain_output): Rename to ... (ser_base_drain_output): ... this. (ser_unix_nop_raw): Rename to ... (ser_base_raw): ... this. (ser_unix_nop_get_tty_state): Rename to ... (ser_base_set_tty_state): ... this. (ser_unix_nop_noflush_set_tty_state): Rename to ... (ser_base_noflush_set_tty_state): ... this. (ser_unix_nop_print_tty_state): Rename to ... (ser_base_print_tty_state): ... this. (ser_unix_nop_setbaudrate): Rename to ... (ser_base_setbaudrate): ... this. (ser_unix_nop_setstopbits): Rename to ... (ser_base_setstopbits): ... this. (ser_unix_async): Rename to ... (ser_base_async): ... this. * ser-pipe.c (_initialize_ser_pipe): Update accordingly. * ser-tcp.c (_initialize_ser_tcp): Likewise. * ser-unix.c (hardwire_flush_input): Likewise. (_initializer_ser_hardwire): Likewise.
2005-03-25 20:06:36 +00:00
ops->set_tty_state = ser_base_set_tty_state;
ops->print_tty_state = ser_base_print_tty_state;
ops->noflush_set_tty_state = ser_base_noflush_set_tty_state;
ops->setbaudrate = ser_base_setbaudrate;
ops->setstopbits = ser_base_setstopbits;
ops->drain_output = ser_base_drain_output;
ops->async = ser_base_async;
ops->read_prim = ser_unix_read_prim;
ops->write_prim = ser_unix_write_prim;
1999-09-22 03:28:34 +00:00
serial_add_interface (ops);
1999-07-12 18:08:43 +00:00
}