old-cross-binutils/gdb/annotate.c

610 lines
12 KiB
C
Raw Normal View History

/* Annotation routines for GDB.
Copyright (C) 1986-2016 Free Software Foundation, Inc.
1999-07-07 20:19:36 +00:00
This file is part of GDB.
1999-07-07 20:19:36 +00:00
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
1999-07-07 20:19:36 +00:00
(at your option) any later version.
1999-07-07 20:19:36 +00:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
1999-07-07 20:19:36 +00:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "annotate.h"
#include "value.h"
#include "target.h"
#include "gdbtypes.h"
#include "breakpoint.h"
#include "observer.h"
With some changes to how software single-step (SSS) breakpoints are handled, one of those being to place SSS breakpoints on the breakpoint chain as all other breakpoints, annota1.exp times out with lots and lots of breakpoint-invalid and frame-changed annotations. All those extra annotations are actually unnecessary. For one, SSS breakpoints are internal breakpoints, so the frontend shouldn't care if they were added, removed or changed. Then, there's really no point in emitting "breakpoints-invalid" or "frames-invalid" more than once between times the frontend/user can actually issues GDB commands; the frontend will have to wait for the GDB prompt to refresh its state, so emitting those annotations at most once between prompts is enough. Non-stop or async would complicate this, but no frontend will be using annotations in those modes (one of goes of emacs switching to MI was non-stop mode support, AFAIK). The previous patch reveals there has been an intention in the past to suppress multiple breakpoints-invalid annotations caused by ignore count changes. As the previous patch shows, that's always been broken, but in any case, this patch actually makes it work. The next patch will remove several annotation-specific calls in breakpoint.c in favor of always using the breakpoint modified & friends observers, and that causes yet more of these annotations, because several calls to the corresponding annotate_* functions in breakpoint.c are missing, particularly in newer code. So all in all, here's a simple mechanism that avoids sending the same annotation to the frontend more than once until gdb is ready to accept further commands. Tested on x86_64 Fedora 17. 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
#include "inferior.h"
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 11:29:11 +00:00
#include "infrun.h"
/* Prototypes for local functions. */
2000-05-28 01:12:42 +00:00
extern void _initialize_annotate (void);
1999-05-25 18:09:09 +00:00
2000-05-28 01:12:42 +00:00
static void print_value_flags (struct type *);
MI breakpoint notifications. * annotate.c (breakpoint_changed): Adjust parameter type. * breakpoint.c (set_breakpoint_condition): Adjust to change in breakpoint_modified type. (breakpoint_set_commands): Likewise. (do_map_commands_command): Likewise. (bpstat_check_breakpoint_conditions): Notify that breakpoint has changed after bumping hit count. (bpstat_stop_status): Likewise. (print_one_breakpoint_location): Don't wrap in tuple here. (print_one_breakpoint): Always print individual locations. For locations, use unnamed tuple. (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint has changed. (create_catchpoint, create_syscall_event_catchpoint): Call breakpoint_created obsever. (mention): Don't call breakpoint_created observer. (create_breakpoint_sal): Call breakpoint_created observer. (create_breakpoint, watch_command_1): Likewise. (create_ada_exception_breakpoint): Likewise. (delete_breakpoint): Call breakpoint_deleted breakpoint. (locations_are_equal): New. (update_breakpoint_locations): If locations were changed, notify. (set_ignore_count, disable_breakpoint, do_enable_breakpoint): Call breakpoint_modified observer. * mi/mi-cmd-break.c (breakpoint_notify): Adjust. (mi_cmd_break_insert): Don't set observers for modify and delete. * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New. (mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified): New. (mi_interpreter_init): Hook the above. * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications while -break-* commands are executing. * mi/mi-main.h (mi_suppress_breakpoint_notifications): New. * mi/mi-out.c (struct ui_out_data): New field original_buffer. (mi_redirect): New. (mi_ui_out_impl): Hook in mi_redirect. (mi_field_skip): True to the name, skip the field, don't output a field with an empty value. * python/py-breakpoint.c (gdbpy_breakpoint_created) (gdbpy_breakpoint_deleted): Adjust. * tui/tui-hooks.c (tui_event_create_breakpoint) (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust.
2011-04-27 10:17:39 +00:00
static void breakpoint_changed (struct breakpoint *b);
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-21 23:52:21 +00:00
void (*deprecated_annotate_signalled_hook) (void);
void (*deprecated_annotate_signal_hook) (void);
With some changes to how software single-step (SSS) breakpoints are handled, one of those being to place SSS breakpoints on the breakpoint chain as all other breakpoints, annota1.exp times out with lots and lots of breakpoint-invalid and frame-changed annotations. All those extra annotations are actually unnecessary. For one, SSS breakpoints are internal breakpoints, so the frontend shouldn't care if they were added, removed or changed. Then, there's really no point in emitting "breakpoints-invalid" or "frames-invalid" more than once between times the frontend/user can actually issues GDB commands; the frontend will have to wait for the GDB prompt to refresh its state, so emitting those annotations at most once between prompts is enough. Non-stop or async would complicate this, but no frontend will be using annotations in those modes (one of goes of emacs switching to MI was non-stop mode support, AFAIK). The previous patch reveals there has been an intention in the past to suppress multiple breakpoints-invalid annotations caused by ignore count changes. As the previous patch shows, that's always been broken, but in any case, this patch actually makes it work. The next patch will remove several annotation-specific calls in breakpoint.c in favor of always using the breakpoint modified & friends observers, and that causes yet more of these annotations, because several calls to the corresponding annotate_* functions in breakpoint.c are missing, particularly in newer code. So all in all, here's a simple mechanism that avoids sending the same annotation to the frontend more than once until gdb is ready to accept further commands. Tested on x86_64 Fedora 17. 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
/* Booleans indicating whether we've emitted certain notifications.
Used to suppress useless repeated notifications until the next time
we're ready to accept more commands. Reset whenever a prompt is
displayed. */
static int frames_invalid_emitted;
static int breakpoints_invalid_emitted;
/* True if the target can async, and a synchronous execution command
is not in progress. If true, input is accepted, so don't suppress
annotations. */
static int
async_background_execution_p (void)
{
return (target_can_async_p () && !sync_execution);
}
static void
2000-07-30 01:48:28 +00:00
print_value_flags (struct type *t)
{
if (can_dereference (t))
printf_filtered (("*"));
else
printf_filtered (("-"));
}
All annotate_breakpoints_changed calls are along-side observer_notify_breakpoints_changed calls. All, except the init_raw_breakpoint one. But that one is actually wrong. The breakpoint is being constructed at that point, and hasn't been placed on the breakpoint chain yet. It would be better placed in install_breakpoint, and I actually started out that way. But once the annotate_breakpoints_changed are parallel to the observer calls, we can fully move annotations to observers too. One issue is that this changes the order of annotations a bit. Before, we'd emit the annotation, and after call "mention()" on the breakpoint (which prints the breakpoint number, etc.). But, we call the observers _after_ mention is called, so the annotation output will change a little: void install_breakpoint (int internal, struct breakpoint *b, int update_gll) { add_to_breakpoint_chain (b); set_breakpoint_number (internal, b); if (is_tracepoint (b)) set_tracepoint_count (breakpoint_count); if (!internal) mention (b); observer_notify_breakpoint_created (b); if (update_gll) update_global_location_list (1); } I believe this order doesn't really matter (the frontend needs to wait for the prompt anyway), so I just adjust the expected output in the tests. Emacs in annotations mode doesn't seem to complain. Couple that with the previous patch that suppressed duplicated annotations, and, the fact that some annotations calls were actually missing (were we do have observer calls), more changes to the tests are needed anyway. Tested on x86_64 Fedora 17. gdb/ 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c (annotate_breakpoints_changed): Rename to ... (annotate_breakpoints_invalid): ... this. Make static. (breakpoint_changed): Adjust. (_initialize_annotate): Always install the observers. Install a "breakpoint_created" observer. * annotate.h (annotate_breakpoints_changed): Delete declaration. * breakpoint.c (set_breakpoint_condition) (breakpoint_set_commands, do_map_commands_command) (init_raw_breakpoint, clear_command, set_ignore_count) (enable_breakpoint_disp): No longer call annotate_breakpoints_changed. gdb/testsuite/ 2013-01-22 Pedro Alves <palves@redhat.com> * gdb.base/annota1.exp (breakpoints_invalid): New variable. Adjust tests to breakpoints-invalid changes. * gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New variables. Adjust tests to breakpoints-invalid changes.
2013-01-22 20:19:40 +00:00
static void
annotate_breakpoints_invalid (void)
{
With some changes to how software single-step (SSS) breakpoints are handled, one of those being to place SSS breakpoints on the breakpoint chain as all other breakpoints, annota1.exp times out with lots and lots of breakpoint-invalid and frame-changed annotations. All those extra annotations are actually unnecessary. For one, SSS breakpoints are internal breakpoints, so the frontend shouldn't care if they were added, removed or changed. Then, there's really no point in emitting "breakpoints-invalid" or "frames-invalid" more than once between times the frontend/user can actually issues GDB commands; the frontend will have to wait for the GDB prompt to refresh its state, so emitting those annotations at most once between prompts is enough. Non-stop or async would complicate this, but no frontend will be using annotations in those modes (one of goes of emacs switching to MI was non-stop mode support, AFAIK). The previous patch reveals there has been an intention in the past to suppress multiple breakpoints-invalid annotations caused by ignore count changes. As the previous patch shows, that's always been broken, but in any case, this patch actually makes it work. The next patch will remove several annotation-specific calls in breakpoint.c in favor of always using the breakpoint modified & friends observers, and that causes yet more of these annotations, because several calls to the corresponding annotate_* functions in breakpoint.c are missing, particularly in newer code. So all in all, here's a simple mechanism that avoids sending the same annotation to the frontend more than once until gdb is ready to accept further commands. Tested on x86_64 Fedora 17. 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
if (annotation_level == 2
&& (!breakpoints_invalid_emitted
|| async_background_execution_p ()))
{
PR gdb/17472: With annotations, input while executing in the foreground crashes readline/GDB Jan caught an intermittent GDB crash with the annota1.exp test: Starting program: .../gdb/testsuite/gdb.base/annota1 ^M [...] FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout) [...] readline: readline_callback_read_char() called with no handler!^M ERROR: Process no longer exists All we need to is to continue the inferior in the foreground, and type a command while the inferior is running. E.g.: (gdb) set annotate 2 ▒▒pre-prompt (gdb) ▒▒prompt c ▒▒post-prompt Continuing. ▒▒starting ▒▒frames-invalid *inferior is running now* p 1<ret> readline: readline_callback_read_char() called with no handler! Aborted (core dumped) $ When we run a foreground execution command we call target_terminal_inferior to stop GDB from processing input, and to put the inferior's terminal settings in effect. Then we tell readline to hide the prompt with display_gdb_prompt, which clears readline's input callback too. When the target stops, we call target_terminal_ours, which re-installs stdin in the event loop, and then we redisplay the prompt, reinstalling the readline callbacks. However, when annotations are in effect, the "frames-invalid" annotation code calls target_terminal_ours after 'resume' had already called target_terminal_inferior: (top-gdb) bt #0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219 #1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705 #2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612 #3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136 #4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263 #5 0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613 And then once we hide the prompt and remove readline's input handler callback, we're in a bad state. We end up with the target running supposedly in the foreground, but with stdin still installed on the event loop. Any input then calls into readline, which aborts because no rl_linefunc callback handler is installed: Program received signal SIGABRT, Aborted. 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig); (top-gdb) bt #0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x0000003b36a36f68 in __GI_abort () at abort.c:89 During symbol reading, debug info gives source 9 included from file at zero line 0. During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1. #2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116 #3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167 #4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373 #5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763 #6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340 #7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404 #8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429 #9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182 #10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318 #11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323 #12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151 #14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159 #16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32 The fix is to make the annotation code call target_terminal_inferior again after printing, if the inferior's settings were in effect. While at it, when we're doing output only, instead of target_terminal_ours, we should call target_terminal_ours_for_output. The latter doesn't actually remove stdin from the event loop, and also leaves SIGINT forwarded to the target. New test included. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * annotate.c (annotate_breakpoints_invalid): Use target_terminal_our_for_output instead of target_terminal_ours. Give back the terminal to the target. (annotate_frames_invalid): Likewise. gdb/testsuite/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * gdb.base/annota-input-while-running.c: New file. * gdb.base/annota-input-while-running.exp: New file.
2014-10-17 12:31:25 +00:00
/* If the inferior owns the terminal (e.g., we're resuming),
make sure to leave with the inferior still owning it. */
int was_inferior = target_terminal_is_inferior ();
target_terminal_ours_for_output ();
printf_unfiltered (("\n\032\032breakpoints-invalid\n"));
PR gdb/17472: With annotations, input while executing in the foreground crashes readline/GDB Jan caught an intermittent GDB crash with the annota1.exp test: Starting program: .../gdb/testsuite/gdb.base/annota1 ^M [...] FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout) [...] readline: readline_callback_read_char() called with no handler!^M ERROR: Process no longer exists All we need to is to continue the inferior in the foreground, and type a command while the inferior is running. E.g.: (gdb) set annotate 2 ▒▒pre-prompt (gdb) ▒▒prompt c ▒▒post-prompt Continuing. ▒▒starting ▒▒frames-invalid *inferior is running now* p 1<ret> readline: readline_callback_read_char() called with no handler! Aborted (core dumped) $ When we run a foreground execution command we call target_terminal_inferior to stop GDB from processing input, and to put the inferior's terminal settings in effect. Then we tell readline to hide the prompt with display_gdb_prompt, which clears readline's input callback too. When the target stops, we call target_terminal_ours, which re-installs stdin in the event loop, and then we redisplay the prompt, reinstalling the readline callbacks. However, when annotations are in effect, the "frames-invalid" annotation code calls target_terminal_ours after 'resume' had already called target_terminal_inferior: (top-gdb) bt #0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219 #1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705 #2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612 #3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136 #4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263 #5 0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613 And then once we hide the prompt and remove readline's input handler callback, we're in a bad state. We end up with the target running supposedly in the foreground, but with stdin still installed on the event loop. Any input then calls into readline, which aborts because no rl_linefunc callback handler is installed: Program received signal SIGABRT, Aborted. 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig); (top-gdb) bt #0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x0000003b36a36f68 in __GI_abort () at abort.c:89 During symbol reading, debug info gives source 9 included from file at zero line 0. During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1. #2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116 #3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167 #4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373 #5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763 #6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340 #7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404 #8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429 #9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182 #10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318 #11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323 #12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151 #14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159 #16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32 The fix is to make the annotation code call target_terminal_inferior again after printing, if the inferior's settings were in effect. While at it, when we're doing output only, instead of target_terminal_ours, we should call target_terminal_ours_for_output. The latter doesn't actually remove stdin from the event loop, and also leaves SIGINT forwarded to the target. New test included. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * annotate.c (annotate_breakpoints_invalid): Use target_terminal_our_for_output instead of target_terminal_ours. Give back the terminal to the target. (annotate_frames_invalid): Likewise. gdb/testsuite/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * gdb.base/annota-input-while-running.c: New file. * gdb.base/annota-input-while-running.exp: New file.
2014-10-17 12:31:25 +00:00
if (was_inferior)
target_terminal_inferior ();
With some changes to how software single-step (SSS) breakpoints are handled, one of those being to place SSS breakpoints on the breakpoint chain as all other breakpoints, annota1.exp times out with lots and lots of breakpoint-invalid and frame-changed annotations. All those extra annotations are actually unnecessary. For one, SSS breakpoints are internal breakpoints, so the frontend shouldn't care if they were added, removed or changed. Then, there's really no point in emitting "breakpoints-invalid" or "frames-invalid" more than once between times the frontend/user can actually issues GDB commands; the frontend will have to wait for the GDB prompt to refresh its state, so emitting those annotations at most once between prompts is enough. Non-stop or async would complicate this, but no frontend will be using annotations in those modes (one of goes of emacs switching to MI was non-stop mode support, AFAIK). The previous patch reveals there has been an intention in the past to suppress multiple breakpoints-invalid annotations caused by ignore count changes. As the previous patch shows, that's always been broken, but in any case, this patch actually makes it work. The next patch will remove several annotation-specific calls in breakpoint.c in favor of always using the breakpoint modified & friends observers, and that causes yet more of these annotations, because several calls to the corresponding annotate_* functions in breakpoint.c are missing, particularly in newer code. So all in all, here's a simple mechanism that avoids sending the same annotation to the frontend more than once until gdb is ready to accept further commands. Tested on x86_64 Fedora 17. 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
breakpoints_invalid_emitted = 1;
}
}
void
2000-07-30 01:48:28 +00:00
annotate_breakpoint (int num)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032breakpoint %d\n"), num);
}
void
2000-07-30 01:48:28 +00:00
annotate_catchpoint (int num)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032catchpoint %d\n"), num);
}
void
2000-07-30 01:48:28 +00:00
annotate_watchpoint (int num)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032watchpoint %d\n"), num);
}
void
2000-07-30 01:48:28 +00:00
annotate_starting (void)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032starting\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_stopped (void)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032stopped\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_exited (int exitstatus)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032exited %d\n"), exitstatus);
}
void
2000-07-30 01:48:28 +00:00
annotate_signalled (void)
{
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-21 23:52:21 +00:00
if (deprecated_annotate_signalled_hook)
deprecated_annotate_signalled_hook ();
if (annotation_level > 1)
printf_filtered (("\n\032\032signalled\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_signal_name (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032signal-name\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_signal_name_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032signal-name-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_signal_string (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032signal-string\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_signal_string_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032signal-string-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_signal (void)
{
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-21 23:52:21 +00:00
if (deprecated_annotate_signal_hook)
deprecated_annotate_signal_hook ();
1999-04-26 18:34:20 +00:00
if (annotation_level > 1)
printf_filtered (("\n\032\032signal\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_breakpoints_headers (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032breakpoints-headers\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_field (int num)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032field %d\n"), num);
}
void
2000-07-30 01:48:28 +00:00
annotate_breakpoints_table (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032breakpoints-table\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_record (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032record\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_breakpoints_table_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032breakpoints-table-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frames_invalid (void)
{
With some changes to how software single-step (SSS) breakpoints are handled, one of those being to place SSS breakpoints on the breakpoint chain as all other breakpoints, annota1.exp times out with lots and lots of breakpoint-invalid and frame-changed annotations. All those extra annotations are actually unnecessary. For one, SSS breakpoints are internal breakpoints, so the frontend shouldn't care if they were added, removed or changed. Then, there's really no point in emitting "breakpoints-invalid" or "frames-invalid" more than once between times the frontend/user can actually issues GDB commands; the frontend will have to wait for the GDB prompt to refresh its state, so emitting those annotations at most once between prompts is enough. Non-stop or async would complicate this, but no frontend will be using annotations in those modes (one of goes of emacs switching to MI was non-stop mode support, AFAIK). The previous patch reveals there has been an intention in the past to suppress multiple breakpoints-invalid annotations caused by ignore count changes. As the previous patch shows, that's always been broken, but in any case, this patch actually makes it work. The next patch will remove several annotation-specific calls in breakpoint.c in favor of always using the breakpoint modified & friends observers, and that causes yet more of these annotations, because several calls to the corresponding annotate_* functions in breakpoint.c are missing, particularly in newer code. So all in all, here's a simple mechanism that avoids sending the same annotation to the frontend more than once until gdb is ready to accept further commands. Tested on x86_64 Fedora 17. 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
if (annotation_level == 2
&& (!frames_invalid_emitted
|| async_background_execution_p ()))
{
PR gdb/17472: With annotations, input while executing in the foreground crashes readline/GDB Jan caught an intermittent GDB crash with the annota1.exp test: Starting program: .../gdb/testsuite/gdb.base/annota1 ^M [...] FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout) [...] readline: readline_callback_read_char() called with no handler!^M ERROR: Process no longer exists All we need to is to continue the inferior in the foreground, and type a command while the inferior is running. E.g.: (gdb) set annotate 2 ▒▒pre-prompt (gdb) ▒▒prompt c ▒▒post-prompt Continuing. ▒▒starting ▒▒frames-invalid *inferior is running now* p 1<ret> readline: readline_callback_read_char() called with no handler! Aborted (core dumped) $ When we run a foreground execution command we call target_terminal_inferior to stop GDB from processing input, and to put the inferior's terminal settings in effect. Then we tell readline to hide the prompt with display_gdb_prompt, which clears readline's input callback too. When the target stops, we call target_terminal_ours, which re-installs stdin in the event loop, and then we redisplay the prompt, reinstalling the readline callbacks. However, when annotations are in effect, the "frames-invalid" annotation code calls target_terminal_ours after 'resume' had already called target_terminal_inferior: (top-gdb) bt #0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219 #1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705 #2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612 #3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136 #4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263 #5 0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613 And then once we hide the prompt and remove readline's input handler callback, we're in a bad state. We end up with the target running supposedly in the foreground, but with stdin still installed on the event loop. Any input then calls into readline, which aborts because no rl_linefunc callback handler is installed: Program received signal SIGABRT, Aborted. 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig); (top-gdb) bt #0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x0000003b36a36f68 in __GI_abort () at abort.c:89 During symbol reading, debug info gives source 9 included from file at zero line 0. During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1. #2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116 #3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167 #4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373 #5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763 #6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340 #7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404 #8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429 #9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182 #10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318 #11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323 #12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151 #14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159 #16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32 The fix is to make the annotation code call target_terminal_inferior again after printing, if the inferior's settings were in effect. While at it, when we're doing output only, instead of target_terminal_ours, we should call target_terminal_ours_for_output. The latter doesn't actually remove stdin from the event loop, and also leaves SIGINT forwarded to the target. New test included. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * annotate.c (annotate_breakpoints_invalid): Use target_terminal_our_for_output instead of target_terminal_ours. Give back the terminal to the target. (annotate_frames_invalid): Likewise. gdb/testsuite/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * gdb.base/annota-input-while-running.c: New file. * gdb.base/annota-input-while-running.exp: New file.
2014-10-17 12:31:25 +00:00
/* If the inferior owns the terminal (e.g., we're resuming),
make sure to leave with the inferior still owning it. */
int was_inferior = target_terminal_is_inferior ();
target_terminal_ours_for_output ();
printf_unfiltered (("\n\032\032frames-invalid\n"));
PR gdb/17472: With annotations, input while executing in the foreground crashes readline/GDB Jan caught an intermittent GDB crash with the annota1.exp test: Starting program: .../gdb/testsuite/gdb.base/annota1 ^M [...] FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout) [...] readline: readline_callback_read_char() called with no handler!^M ERROR: Process no longer exists All we need to is to continue the inferior in the foreground, and type a command while the inferior is running. E.g.: (gdb) set annotate 2 ▒▒pre-prompt (gdb) ▒▒prompt c ▒▒post-prompt Continuing. ▒▒starting ▒▒frames-invalid *inferior is running now* p 1<ret> readline: readline_callback_read_char() called with no handler! Aborted (core dumped) $ When we run a foreground execution command we call target_terminal_inferior to stop GDB from processing input, and to put the inferior's terminal settings in effect. Then we tell readline to hide the prompt with display_gdb_prompt, which clears readline's input callback too. When the target stops, we call target_terminal_ours, which re-installs stdin in the event loop, and then we redisplay the prompt, reinstalling the readline callbacks. However, when annotations are in effect, the "frames-invalid" annotation code calls target_terminal_ours after 'resume' had already called target_terminal_inferior: (top-gdb) bt #0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219 #1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705 #2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612 #3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136 #4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263 #5 0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613 And then once we hide the prompt and remove readline's input handler callback, we're in a bad state. We end up with the target running supposedly in the foreground, but with stdin still installed on the event loop. Any input then calls into readline, which aborts because no rl_linefunc callback handler is installed: Program received signal SIGABRT, Aborted. 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig); (top-gdb) bt #0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56 #1 0x0000003b36a36f68 in __GI_abort () at abort.c:89 During symbol reading, debug info gives source 9 included from file at zero line 0. During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1. #2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116 #3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167 #4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373 #5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763 #6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340 #7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404 #8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429 #9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182 #10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318 #11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323 #12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151 #14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL) at src/gdb/exceptions.c:237 #15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159 #16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32 The fix is to make the annotation code call target_terminal_inferior again after printing, if the inferior's settings were in effect. While at it, when we're doing output only, instead of target_terminal_ours, we should call target_terminal_ours_for_output. The latter doesn't actually remove stdin from the event loop, and also leaves SIGINT forwarded to the target. New test included. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * annotate.c (annotate_breakpoints_invalid): Use target_terminal_our_for_output instead of target_terminal_ours. Give back the terminal to the target. (annotate_frames_invalid): Likewise. gdb/testsuite/ 2014-10-17 Pedro Alves <palves@redhat.com> PR gdb/17472 * gdb.base/annota-input-while-running.c: New file. * gdb.base/annota-input-while-running.exp: New file.
2014-10-17 12:31:25 +00:00
if (was_inferior)
target_terminal_inferior ();
With some changes to how software single-step (SSS) breakpoints are handled, one of those being to place SSS breakpoints on the breakpoint chain as all other breakpoints, annota1.exp times out with lots and lots of breakpoint-invalid and frame-changed annotations. All those extra annotations are actually unnecessary. For one, SSS breakpoints are internal breakpoints, so the frontend shouldn't care if they were added, removed or changed. Then, there's really no point in emitting "breakpoints-invalid" or "frames-invalid" more than once between times the frontend/user can actually issues GDB commands; the frontend will have to wait for the GDB prompt to refresh its state, so emitting those annotations at most once between prompts is enough. Non-stop or async would complicate this, but no frontend will be using annotations in those modes (one of goes of emacs switching to MI was non-stop mode support, AFAIK). The previous patch reveals there has been an intention in the past to suppress multiple breakpoints-invalid annotations caused by ignore count changes. As the previous patch shows, that's always been broken, but in any case, this patch actually makes it work. The next patch will remove several annotation-specific calls in breakpoint.c in favor of always using the breakpoint modified & friends observers, and that causes yet more of these annotations, because several calls to the corresponding annotate_* functions in breakpoint.c are missing, particularly in newer code. So all in all, here's a simple mechanism that avoids sending the same annotation to the frontend more than once until gdb is ready to accept further commands. Tested on x86_64 Fedora 17. 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
frames_invalid_emitted = 1;
}
}
void
annotate_new_thread (void)
{
if (annotation_level > 1)
{
printf_unfiltered (("\n\032\032new-thread\n"));
}
}
void
annotate_thread_changed (void)
{
if (annotation_level > 1)
{
printf_unfiltered (("\n\032\032thread-changed\n"));
}
}
void
2000-07-30 01:48:28 +00:00
annotate_field_begin (struct type *type)
{
if (annotation_level == 2)
{
printf_filtered (("\n\032\032field-begin "));
print_value_flags (type);
printf_filtered (("\n"));
}
}
void
2000-07-30 01:48:28 +00:00
annotate_field_name_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032field-name-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_field_value (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032field-value\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_field_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032field-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_quit (void)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032quit\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_error (void)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032error\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_error_begin (void)
{
if (annotation_level > 1)
fprintf_filtered (gdb_stderr, "\n\032\032error-begin\n");
}
void
2000-07-30 01:48:28 +00:00
annotate_value_history_begin (int histindex, struct type *type)
{
if (annotation_level == 2)
{
printf_filtered (("\n\032\032value-history-begin %d "), histindex);
print_value_flags (type);
printf_filtered (("\n"));
}
}
void
2000-07-30 01:48:28 +00:00
annotate_value_begin (struct type *type)
{
if (annotation_level == 2)
{
printf_filtered (("\n\032\032value-begin "));
print_value_flags (type);
printf_filtered (("\n"));
}
}
void
2000-07-30 01:48:28 +00:00
annotate_value_history_value (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032value-history-value\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_value_history_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032value-history-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_value_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032value-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_display_begin (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032display-begin\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_display_number_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032display-number-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_display_format (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032display-format\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_display_expression (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032display-expression\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_display_expression_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032display-expression-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_display_value (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032display-value\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_display_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032display-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_arg_begin (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032arg-begin\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_arg_name_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032arg-name-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_arg_value (struct type *type)
{
if (annotation_level == 2)
{
printf_filtered (("\n\032\032arg-value "));
print_value_flags (type);
printf_filtered (("\n"));
}
}
void
2000-07-30 01:48:28 +00:00
annotate_arg_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032arg-end\n"));
}
void
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
annotate_source (char *filename, int line, int character, int mid,
struct gdbarch *gdbarch, CORE_ADDR pc)
{
if (annotation_level > 1)
printf_filtered (("\n\032\032source "));
else
printf_filtered (("\032\032"));
printf_filtered (("%s:%d:%d:%s:%s\n"), filename, line, character,
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
mid ? "middle" : "beg", paddress (gdbarch, pc));
}
void
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
annotate_frame_begin (int level, struct gdbarch *gdbarch, CORE_ADDR pc)
{
if (annotation_level > 1)
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 17:21:10 +00:00
printf_filtered (("\n\032\032frame-begin %d %s\n"),
level, paddress (gdbarch, pc));
}
void
2000-07-30 01:48:28 +00:00
annotate_function_call (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032function-call\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_signal_handler_caller (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032signal-handler-caller\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_address (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-address\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_address_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-address-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_function_name (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-function-name\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_args (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-args\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_source_begin (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-source-begin\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_source_file (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-source-file\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_source_file_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-source-file-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_source_line (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-source-line\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_source_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-source-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_where (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-where\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_frame_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032frame-end\n"));
}
void
annotate_array_section_begin (int idx, struct type *elttype)
{
if (annotation_level == 2)
{
printf_filtered (("\n\032\032array-section-begin %d "), idx);
print_value_flags (elttype);
printf_filtered (("\n"));
}
}
void
2000-07-30 01:48:28 +00:00
annotate_elt_rep (unsigned int repcount)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032elt-rep %u\n"), repcount);
}
void
2000-07-30 01:48:28 +00:00
annotate_elt_rep_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032elt-rep-end\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_elt (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032elt\n"));
}
void
2000-07-30 01:48:28 +00:00
annotate_array_section_end (void)
{
if (annotation_level == 2)
printf_filtered (("\n\032\032array-section-end\n"));
}
With some changes to how software single-step (SSS) breakpoints are handled, one of those being to place SSS breakpoints on the breakpoint chain as all other breakpoints, annota1.exp times out with lots and lots of breakpoint-invalid and frame-changed annotations. All those extra annotations are actually unnecessary. For one, SSS breakpoints are internal breakpoints, so the frontend shouldn't care if they were added, removed or changed. Then, there's really no point in emitting "breakpoints-invalid" or "frames-invalid" more than once between times the frontend/user can actually issues GDB commands; the frontend will have to wait for the GDB prompt to refresh its state, so emitting those annotations at most once between prompts is enough. Non-stop or async would complicate this, but no frontend will be using annotations in those modes (one of goes of emacs switching to MI was non-stop mode support, AFAIK). The previous patch reveals there has been an intention in the past to suppress multiple breakpoints-invalid annotations caused by ignore count changes. As the previous patch shows, that's always been broken, but in any case, this patch actually makes it work. The next patch will remove several annotation-specific calls in breakpoint.c in favor of always using the breakpoint modified & friends observers, and that causes yet more of these annotations, because several calls to the corresponding annotate_* functions in breakpoint.c are missing, particularly in newer code. So all in all, here's a simple mechanism that avoids sending the same annotation to the frontend more than once until gdb is ready to accept further commands. Tested on x86_64 Fedora 17. 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c: Include "inferior.h". (frames_invalid_emitted) (breakpoints_invalid_emitted): New globals. (async_background_execution_p): New function. (annotate_breakpoints_changed, annotate_frames_invalid): Skip emitting the annotation if it has already been emitted. (annotate_display_prompt): New function. * annotate.h (annotate_display_prompt): New declaration. * event-top.c: Include annotate.h. (display_gdb_prompt): Call annotate_display_prompt.
2013-01-22 20:17:10 +00:00
/* Called when GDB is about to display the prompt. Used to reset
annotation suppression whenever we're ready to accept new
frontend/user commands. */
void
annotate_display_prompt (void)
{
frames_invalid_emitted = 0;
breakpoints_invalid_emitted = 0;
}
static void
MI breakpoint notifications. * annotate.c (breakpoint_changed): Adjust parameter type. * breakpoint.c (set_breakpoint_condition): Adjust to change in breakpoint_modified type. (breakpoint_set_commands): Likewise. (do_map_commands_command): Likewise. (bpstat_check_breakpoint_conditions): Notify that breakpoint has changed after bumping hit count. (bpstat_stop_status): Likewise. (print_one_breakpoint_location): Don't wrap in tuple here. (print_one_breakpoint): Always print individual locations. For locations, use unnamed tuple. (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint has changed. (create_catchpoint, create_syscall_event_catchpoint): Call breakpoint_created obsever. (mention): Don't call breakpoint_created observer. (create_breakpoint_sal): Call breakpoint_created observer. (create_breakpoint, watch_command_1): Likewise. (create_ada_exception_breakpoint): Likewise. (delete_breakpoint): Call breakpoint_deleted breakpoint. (locations_are_equal): New. (update_breakpoint_locations): If locations were changed, notify. (set_ignore_count, disable_breakpoint, do_enable_breakpoint): Call breakpoint_modified observer. * mi/mi-cmd-break.c (breakpoint_notify): Adjust. (mi_cmd_break_insert): Don't set observers for modify and delete. * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New. (mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified): New. (mi_interpreter_init): Hook the above. * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications while -break-* commands are executing. * mi/mi-main.h (mi_suppress_breakpoint_notifications): New. * mi/mi-out.c (struct ui_out_data): New field original_buffer. (mi_redirect): New. (mi_ui_out_impl): Hook in mi_redirect. (mi_field_skip): True to the name, skip the field, don't output a field with an empty value. * python/py-breakpoint.c (gdbpy_breakpoint_created) (gdbpy_breakpoint_deleted): Adjust. * tui/tui-hooks.c (tui_event_create_breakpoint) (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust.
2011-04-27 10:17:39 +00:00
breakpoint_changed (struct breakpoint *b)
{
if (b->number <= 0)
return;
All annotate_breakpoints_changed calls are along-side observer_notify_breakpoints_changed calls. All, except the init_raw_breakpoint one. But that one is actually wrong. The breakpoint is being constructed at that point, and hasn't been placed on the breakpoint chain yet. It would be better placed in install_breakpoint, and I actually started out that way. But once the annotate_breakpoints_changed are parallel to the observer calls, we can fully move annotations to observers too. One issue is that this changes the order of annotations a bit. Before, we'd emit the annotation, and after call "mention()" on the breakpoint (which prints the breakpoint number, etc.). But, we call the observers _after_ mention is called, so the annotation output will change a little: void install_breakpoint (int internal, struct breakpoint *b, int update_gll) { add_to_breakpoint_chain (b); set_breakpoint_number (internal, b); if (is_tracepoint (b)) set_tracepoint_count (breakpoint_count); if (!internal) mention (b); observer_notify_breakpoint_created (b); if (update_gll) update_global_location_list (1); } I believe this order doesn't really matter (the frontend needs to wait for the prompt anyway), so I just adjust the expected output in the tests. Emacs in annotations mode doesn't seem to complain. Couple that with the previous patch that suppressed duplicated annotations, and, the fact that some annotations calls were actually missing (were we do have observer calls), more changes to the tests are needed anyway. Tested on x86_64 Fedora 17. gdb/ 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c (annotate_breakpoints_changed): Rename to ... (annotate_breakpoints_invalid): ... this. Make static. (breakpoint_changed): Adjust. (_initialize_annotate): Always install the observers. Install a "breakpoint_created" observer. * annotate.h (annotate_breakpoints_changed): Delete declaration. * breakpoint.c (set_breakpoint_condition) (breakpoint_set_commands, do_map_commands_command) (init_raw_breakpoint, clear_command, set_ignore_count) (enable_breakpoint_disp): No longer call annotate_breakpoints_changed. gdb/testsuite/ 2013-01-22 Pedro Alves <palves@redhat.com> * gdb.base/annota1.exp (breakpoints_invalid): New variable. Adjust tests to breakpoints-invalid changes. * gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New variables. Adjust tests to breakpoints-invalid changes.
2013-01-22 20:19:40 +00:00
annotate_breakpoints_invalid ();
}
void
2000-07-30 01:48:28 +00:00
_initialize_annotate (void)
{
All annotate_breakpoints_changed calls are along-side observer_notify_breakpoints_changed calls. All, except the init_raw_breakpoint one. But that one is actually wrong. The breakpoint is being constructed at that point, and hasn't been placed on the breakpoint chain yet. It would be better placed in install_breakpoint, and I actually started out that way. But once the annotate_breakpoints_changed are parallel to the observer calls, we can fully move annotations to observers too. One issue is that this changes the order of annotations a bit. Before, we'd emit the annotation, and after call "mention()" on the breakpoint (which prints the breakpoint number, etc.). But, we call the observers _after_ mention is called, so the annotation output will change a little: void install_breakpoint (int internal, struct breakpoint *b, int update_gll) { add_to_breakpoint_chain (b); set_breakpoint_number (internal, b); if (is_tracepoint (b)) set_tracepoint_count (breakpoint_count); if (!internal) mention (b); observer_notify_breakpoint_created (b); if (update_gll) update_global_location_list (1); } I believe this order doesn't really matter (the frontend needs to wait for the prompt anyway), so I just adjust the expected output in the tests. Emacs in annotations mode doesn't seem to complain. Couple that with the previous patch that suppressed duplicated annotations, and, the fact that some annotations calls were actually missing (were we do have observer calls), more changes to the tests are needed anyway. Tested on x86_64 Fedora 17. gdb/ 2013-01-22 Pedro Alves <palves@redhat.com> * annotate.c (annotate_breakpoints_changed): Rename to ... (annotate_breakpoints_invalid): ... this. Make static. (breakpoint_changed): Adjust. (_initialize_annotate): Always install the observers. Install a "breakpoint_created" observer. * annotate.h (annotate_breakpoints_changed): Delete declaration. * breakpoint.c (set_breakpoint_condition) (breakpoint_set_commands, do_map_commands_command) (init_raw_breakpoint, clear_command, set_ignore_count) (enable_breakpoint_disp): No longer call annotate_breakpoints_changed. gdb/testsuite/ 2013-01-22 Pedro Alves <palves@redhat.com> * gdb.base/annota1.exp (breakpoints_invalid): New variable. Adjust tests to breakpoints-invalid changes. * gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New variables. Adjust tests to breakpoints-invalid changes.
2013-01-22 20:19:40 +00:00
observer_attach_breakpoint_created (breakpoint_changed);
observer_attach_breakpoint_deleted (breakpoint_changed);
observer_attach_breakpoint_modified (breakpoint_changed);
}