old-cross-binutils/gdb/blockframe.c

870 lines
24 KiB
C
Raw Normal View History

1991-03-28 16:26:26 +00:00
/* Get info from stack frames;
convert between frames, blocks, functions and pc values.
Copyright 1986, 1987, 1988, 1989, 1991 Free Software Foundation, Inc.
1991-03-28 16:26:26 +00:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
1991-03-28 16:26:26 +00:00
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
1991-03-28 16:26:26 +00:00
This program is distributed in the hope that it will be useful,
1991-03-28 16:26:26 +00:00
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
1991-03-28 16:26:26 +00:00
#include "defs.h"
#include "symtab.h"
#include "bfd.h"
#include "symfile.h"
#include "objfiles.h"
1991-03-28 16:26:26 +00:00
#include "frame.h"
#include "gdbcore.h"
#include "value.h" /* for read_register */
#include "target.h" /* for target_has_stack */
#include "inferior.h" /* for read_pc */
1991-03-28 16:26:26 +00:00
/* Is ADDR inside the startup file? Note that if your machine
1991-03-28 16:26:26 +00:00
has a way to detect the bottom of the stack, there is no need
to call this function from FRAME_CHAIN_VALID; the reason for
doing so is that some machines have no way of detecting bottom
of stack.
A PC of zero is always considered to be the bottom of the stack. */
1991-03-28 16:26:26 +00:00
int
inside_entry_file (addr)
1991-03-28 16:26:26 +00:00
CORE_ADDR addr;
{
if (addr == 0)
return 1;
if (symfile_objfile == 0)
return 0;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
/* Do not stop backtracing if the pc is in the call dummy
at the entry point. */
if (PC_IN_CALL_DUMMY (addr, 0, 0))
return 0;
#endif
return (addr >= symfile_objfile -> ei.entry_file_lowpc &&
addr < symfile_objfile -> ei.entry_file_highpc);
1991-03-28 16:26:26 +00:00
}
/* Test a specified PC value to see if it is in the range of addresses
that correspond to the main() function. See comments above for why
we might want to do this.
Typically called from FRAME_CHAIN_VALID.
A PC of zero is always considered to be the bottom of the stack. */
int
inside_main_func (pc)
CORE_ADDR pc;
{
if (pc == 0)
return 1;
if (symfile_objfile == 0)
return 0;
return (symfile_objfile -> ei.main_func_lowpc <= pc &&
symfile_objfile -> ei.main_func_highpc > pc);
}
/* Test a specified PC value to see if it is in the range of addresses
that correspond to the process entry point function. See comments
in objfiles.h for why we might want to do this.
Typically called from FRAME_CHAIN_VALID.
A PC of zero is always considered to be the bottom of the stack. */
int
inside_entry_func (pc)
CORE_ADDR pc;
{
if (pc == 0)
return 1;
if (symfile_objfile == 0)
return 0;
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
/* Do not stop backtracing if the pc is in the call dummy
at the entry point. */
if (PC_IN_CALL_DUMMY (pc, 0, 0))
return 0;
#endif
return (symfile_objfile -> ei.entry_func_lowpc <= pc &&
symfile_objfile -> ei.entry_func_highpc > pc);
}
1991-03-28 16:26:26 +00:00
/* Address of innermost stack frame (contents of FP register) */
static FRAME current_frame;
/*
* Cache for frame addresses already read by gdb. Valid only while
* inferior is stopped. Control variables for the frame cache should
* be local to this module.
*/
struct obstack frame_cache_obstack;
/* Return the innermost (currently executing) stack frame. */
FRAME
get_current_frame ()
{
/* We assume its address is kept in a general register;
param.h says which register. */
return current_frame;
}
void
set_current_frame (frame)
FRAME frame;
{
current_frame = frame;
}
FRAME
create_new_frame (addr, pc)
FRAME_ADDR addr;
CORE_ADDR pc;
{
struct frame_info *fci; /* Same type as FRAME */
char *name;
1991-03-28 16:26:26 +00:00
fci = (struct frame_info *)
obstack_alloc (&frame_cache_obstack,
sizeof (struct frame_info));
/* Arbitrary frame */
fci->next = (struct frame_info *) 0;
fci->prev = (struct frame_info *) 0;
fci->frame = addr;
fci->pc = pc;
find_pc_partial_function (pc, &name, (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
fci->signal_handler_caller = IN_SIGTRAMP (fci->pc, name);
1991-03-28 16:26:26 +00:00
#ifdef INIT_EXTRA_FRAME_INFO
INIT_EXTRA_FRAME_INFO (0, fci);
1991-03-28 16:26:26 +00:00
#endif
return fci;
}
/* Return the frame that called FRAME.
If FRAME is the original frame (it has no caller), return 0. */
FRAME
get_prev_frame (frame)
FRAME frame;
{
/* We're allowed to know that FRAME and "struct frame_info *" are
the same */
return get_prev_frame_info (frame);
}
/* Return the frame that FRAME calls (0 if FRAME is the innermost
frame). */
FRAME
get_next_frame (frame)
FRAME frame;
{
/* We're allowed to know that FRAME and "struct frame_info *" are
the same */
return frame->next;
}
/*
* Flush the entire frame cache.
*/
void
flush_cached_frames ()
{
/* Since we can't really be sure what the first object allocated was */
obstack_free (&frame_cache_obstack, 0);
obstack_init (&frame_cache_obstack);
current_frame = (struct frame_info *) 0; /* Invalidate cache */
if (annotation_level > 1)
{
target_terminal_ours ();
printf_unfiltered ("\n\032\032frames-invalid\n");
}
1991-03-28 16:26:26 +00:00
}
/* Flush the frame cache, and start a new one if necessary. */
void
reinit_frame_cache ()
{
flush_cached_frames ();
if (target_has_stack)
{
set_current_frame (create_new_frame (read_fp (), read_pc ()));
select_frame (get_current_frame (), 0);
}
else
{
set_current_frame (0);
select_frame ((FRAME) 0, -1);
}
}
1991-03-28 16:26:26 +00:00
/* Return a structure containing various interesting information
about a specified stack frame. */
/* How do I justify including this function? Well, the FRAME
identifier format has gone through several changes recently, and
it's not completely inconceivable that it could happen again. If
it does, have this routine around will help */
struct frame_info *
get_frame_info (frame)
FRAME frame;
{
return frame;
}
/* If a machine allows frameless functions, it should define a macro
FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) in param.h. FI is the struct
frame_info for the frame, and FRAMELESS should be set to nonzero
if it represents a frameless function invocation. */
/* Return nonzero if the function for this frame lacks a prologue. Many
1991-03-28 16:26:26 +00:00
machines can define FRAMELESS_FUNCTION_INVOCATION to just call this
function. */
int
frameless_look_for_prologue (frame)
FRAME frame;
{
CORE_ADDR func_start, after_prologue;
func_start = (get_pc_function_start (frame->pc) +
FUNCTION_START_OFFSET);
if (func_start)
{
after_prologue = func_start;
#ifdef SKIP_PROLOGUE_FRAMELESS_P
/* This is faster, since only care whether there *is* a prologue,
not how long it is. */
SKIP_PROLOGUE_FRAMELESS_P (after_prologue);
#else
1991-03-28 16:26:26 +00:00
SKIP_PROLOGUE (after_prologue);
#endif
1991-03-28 16:26:26 +00:00
return after_prologue == func_start;
}
else
/* If we can't find the start of the function, we don't really
know whether the function is frameless, but we should be able
to get a reasonable (i.e. best we can do under the
circumstances) backtrace by saying that it isn't. */
return 0;
}
/* Default a few macros that people seldom redefine. */
1991-03-28 16:26:26 +00:00
#if !defined (INIT_FRAME_PC)
#define INIT_FRAME_PC(fromleaf, prev) \
prev->pc = (fromleaf ? SAVED_PC_AFTER_CALL (prev->next) : \
prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
#endif
#ifndef FRAME_CHAIN_COMBINE
#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
#endif
1991-03-28 16:26:26 +00:00
/* Return a structure containing various interesting information
about the frame that called NEXT_FRAME. Returns NULL
if there is no such frame. */
struct frame_info *
get_prev_frame_info (next_frame)
FRAME next_frame;
{
FRAME_ADDR address = 0;
1991-03-28 16:26:26 +00:00
struct frame_info *prev;
int fromleaf = 0;
char *name;
1991-03-28 16:26:26 +00:00
/* If the requested entry is in the cache, return it.
Otherwise, figure out what the address should be for the entry
we're about to add to the cache. */
if (!next_frame)
{
#if 0
/* This screws value_of_variable, which just wants a nice clean
NULL return from block_innermost_frame if there are no frames.
I don't think I've ever seen this message happen otherwise.
And returning NULL here is a perfectly legitimate thing to do. */
1991-03-28 16:26:26 +00:00
if (!current_frame)
{
error ("You haven't set up a process's stack to examine.");
}
#endif
1991-03-28 16:26:26 +00:00
return current_frame;
}
/* If we have the prev one, return it */
if (next_frame->prev)
return next_frame->prev;
/* On some machines it is possible to call a function without
setting up a stack frame for it. On these machines, we
define this macro to take two args; a frameinfo pointer
identifying a frame and a variable to set or clear if it is
or isn't leafless. */
#ifdef FRAMELESS_FUNCTION_INVOCATION
/* Still don't want to worry about this except on the innermost
frame. This macro will set FROMLEAF if NEXT_FRAME is a
frameless function invocation. */
if (!(next_frame->next))
{
FRAMELESS_FUNCTION_INVOCATION (next_frame, fromleaf);
if (fromleaf)
address = next_frame->frame;
}
#endif
if (!fromleaf)
{
/* Two macros defined in tm.h specify the machine-dependent
actions to be performed here.
First, get the frame's chain-pointer.
If that is zero, the frame is the outermost frame or a leaf
called by the outermost frame. This means that if start
calls main without a frame, we'll return 0 (which is fine
anyway).
Nope; there's a problem. This also returns when the current
routine is a leaf of main. This is unacceptable. We move
this to after the ffi test; I'd rather have backtraces from
start go curfluy than have an abort called from main not show
main. */
address = FRAME_CHAIN (next_frame);
if (!FRAME_CHAIN_VALID (address, next_frame))
return 0;
address = FRAME_CHAIN_COMBINE (address, next_frame);
}
if (address == 0)
return 0;
1991-03-28 16:26:26 +00:00
prev = (struct frame_info *)
obstack_alloc (&frame_cache_obstack,
sizeof (struct frame_info));
if (next_frame)
next_frame->prev = prev;
prev->next = next_frame;
prev->prev = (struct frame_info *) 0;
prev->frame = address;
prev->signal_handler_caller = 0;
/* This change should not be needed, FIXME! We should
determine whether any targets *need* INIT_FRAME_PC to happen
after INIT_EXTRA_FRAME_INFO and come up with a simple way to
express what goes on here.
INIT_EXTRA_FRAME_INFO is called from two places: create_new_frame
(where the PC is already set up) and here (where it isn't).
INIT_FRAME_PC is only called from here, always after
INIT_EXTRA_FRAME_INFO.
The catch is the MIPS, where INIT_EXTRA_FRAME_INFO requires the PC
value (which hasn't been set yet). Some other machines appear to
require INIT_EXTRA_FRAME_INFO before they can do INIT_FRAME_PC. Phoo.
We shouldn't need INIT_FRAME_PC_FIRST to add more complication to
an already overcomplicated part of GDB. gnu@cygnus.com, 15Sep92.
To answer the question, yes the sparc needs INIT_FRAME_PC after
INIT_EXTRA_FRAME_INFO. Suggested scheme:
SETUP_INNERMOST_FRAME()
Default version is just create_new_frame (read_fp ()),
read_pc ()). Machines with extra frame info would do that (or the
local equivalent) and then set the extra fields.
SETUP_ARBITRARY_FRAME(argc, argv)
Only change here is that create_new_frame would no longer init extra
frame info; SETUP_ARBITRARY_FRAME would have to do that.
INIT_PREV_FRAME(fromleaf, prev)
Replace INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC. This should
also return a flag saying whether to keep the new frame, or
whether to discard it, because on some machines (e.g. mips) it
is really awkward to have FRAME_CHAIN_VALID called *before*
INIT_EXTRA_FRAME_INFO (there is no good way to get information
deduced in FRAME_CHAIN_VALID into the extra fields of the new frame).
std_frame_pc(fromleaf, prev)
This is the default setting for INIT_PREV_FRAME. It just does what
the default INIT_FRAME_PC does. Some machines will call it from
INIT_PREV_FRAME (either at the beginning, the end, or in the middle).
Some machines won't use it.
kingdon@cygnus.com, 13Apr93, 31Jan94. */
#ifdef INIT_FRAME_PC_FIRST
INIT_FRAME_PC_FIRST (fromleaf, prev);
#endif
1991-03-28 16:26:26 +00:00
#ifdef INIT_EXTRA_FRAME_INFO
INIT_EXTRA_FRAME_INFO(fromleaf, prev);
1991-03-28 16:26:26 +00:00
#endif
/* This entry is in the frame queue now, which is good since
FRAME_SAVED_PC may use that queue to figure out its value
(see tm-sparc.h). We want the pc saved in the inferior frame. */
1991-03-28 16:26:26 +00:00
INIT_FRAME_PC(fromleaf, prev);
/* If ->frame and ->pc are unchanged, we are in the process of getting
ourselves into an infinite backtrace. Some architectures check this
in FRAME_CHAIN or thereabouts, but it seems like there is no reason
this can't be an architecture-independent check. */
if (next_frame != NULL)
{
if (prev->frame == next_frame->frame
&& prev->pc == next_frame->pc)
{
next_frame->prev = NULL;
obstack_free (&frame_cache_obstack, prev);
return NULL;
}
}
find_pc_partial_function (prev->pc, &name,
(CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
if (IN_SIGTRAMP (prev->pc, name))
prev->signal_handler_caller = 1;
1991-03-28 16:26:26 +00:00
return prev;
}
CORE_ADDR
get_frame_pc (frame)
FRAME frame;
{
struct frame_info *fi;
fi = get_frame_info (frame);
return fi->pc;
}
#if defined (FRAME_FIND_SAVED_REGS)
/* Find the addresses in which registers are saved in FRAME. */
void
get_frame_saved_regs (frame_info_addr, saved_regs_addr)
struct frame_info *frame_info_addr;
struct frame_saved_regs *saved_regs_addr;
{
FRAME_FIND_SAVED_REGS (frame_info_addr, *saved_regs_addr);
}
#endif
/* Return the innermost lexical block in execution
in a specified stack frame. The frame address is assumed valid. */
struct block *
get_frame_block (frame)
FRAME frame;
{
struct frame_info *fi;
CORE_ADDR pc;
fi = get_frame_info (frame);
pc = fi->pc;
if (fi->next != 0 && fi->next->signal_handler_caller == 0)
/* We are not in the innermost frame and we were not interrupted
by a signal. We need to subtract one to get the correct block,
in case the call instruction was the last instruction of the block.
If there are any machines on which the saved pc does not point to
after the call insn, we probably want to make fi->pc point after
the call insn anyway. */
1991-03-28 16:26:26 +00:00
--pc;
return block_for_pc (pc);
}
struct block *
get_current_block ()
{
return block_for_pc (read_pc ());
}
CORE_ADDR
get_pc_function_start (pc)
CORE_ADDR pc;
{
register struct block *bl;
1991-03-28 16:26:26 +00:00
register struct symbol *symbol;
register struct minimal_symbol *msymbol;
CORE_ADDR fstart;
if ((bl = block_for_pc (pc)) != NULL &&
(symbol = block_function (bl)) != NULL)
1991-03-28 16:26:26 +00:00
{
bl = SYMBOL_BLOCK_VALUE (symbol);
fstart = BLOCK_START (bl);
1991-03-28 16:26:26 +00:00
}
else if ((msymbol = lookup_minimal_symbol_by_pc (pc)) != NULL)
{
fstart = SYMBOL_VALUE_ADDRESS (msymbol);
}
else
{
fstart = 0;
}
return (fstart);
1991-03-28 16:26:26 +00:00
}
/* Return the symbol for the function executing in frame FRAME. */
struct symbol *
get_frame_function (frame)
FRAME frame;
{
register struct block *bl = get_frame_block (frame);
if (bl == 0)
return 0;
return block_function (bl);
}
/* Return the blockvector immediately containing the innermost lexical block
containing the specified pc value, or 0 if there is none.
PINDEX is a pointer to the index value of the block. If PINDEX
is NULL, we don't pass this information back to the caller. */
struct blockvector *
blockvector_for_pc (pc, pindex)
register CORE_ADDR pc;
int *pindex;
{
register struct block *b;
register int bot, top, half;
register struct symtab *s;
struct blockvector *bl;
/* First search all symtabs for one whose file contains our pc */
s = find_pc_symtab (pc);
if (s == 0)
return 0;
bl = BLOCKVECTOR (s);
b = BLOCKVECTOR_BLOCK (bl, 0);
/* Then search that symtab for the smallest block that wins. */
/* Use binary search to find the last block that starts before PC. */
bot = 0;
top = BLOCKVECTOR_NBLOCKS (bl);
while (top - bot > 1)
{
half = (top - bot + 1) >> 1;
b = BLOCKVECTOR_BLOCK (bl, bot + half);
if (BLOCK_START (b) <= pc)
bot += half;
else
top = bot + half;
}
/* Now search backward for a block that ends after PC. */
while (bot >= 0)
{
b = BLOCKVECTOR_BLOCK (bl, bot);
if (BLOCK_END (b) > pc)
{
if (pindex)
*pindex = bot;
return bl;
}
bot--;
}
return 0;
}
/* Return the innermost lexical block containing the specified pc value,
or 0 if there is none. */
struct block *
block_for_pc (pc)
register CORE_ADDR pc;
{
register struct blockvector *bl;
int index;
bl = blockvector_for_pc (pc, &index);
if (bl)
return BLOCKVECTOR_BLOCK (bl, index);
return 0;
}
/* Return the function containing pc value PC.
Returns 0 if function is not known. */
struct symbol *
find_pc_function (pc)
CORE_ADDR pc;
{
register struct block *b = block_for_pc (pc);
if (b == 0)
return 0;
return block_function (b);
}
/* These variables are used to cache the most recent result
* of find_pc_partial_function. */
static CORE_ADDR cache_pc_function_low = 0;
static CORE_ADDR cache_pc_function_high = 0;
static char *cache_pc_function_name = 0;
/* Clear cache, e.g. when symbol table is discarded. */
void
clear_pc_function_cache()
{
cache_pc_function_low = 0;
cache_pc_function_high = 0;
cache_pc_function_name = (char *)0;
}
/* Finds the "function" (text symbol) that is smaller than PC but
greatest of all of the potential text symbols. Sets *NAME and/or
*ADDRESS conditionally if that pointer is non-null. If ENDADDR is
non-null, then set *ENDADDR to be the end of the function
(exclusive), but passing ENDADDR as non-null means that the
function might cause symbols to be read. This function either
succeeds or fails (not halfway succeeds). If it succeeds, it sets
*NAME, *ADDRESS, and *ENDADDR to real information and returns 1.
If it fails, it sets *NAME, *ADDRESS, and *ENDADDR to zero
and returns 0. */
1991-03-28 16:26:26 +00:00
int
find_pc_partial_function (pc, name, address, endaddr)
1991-03-28 16:26:26 +00:00
CORE_ADDR pc;
char **name;
CORE_ADDR *address;
CORE_ADDR *endaddr;
1991-03-28 16:26:26 +00:00
{
struct partial_symtab *pst;
struct symbol *f;
struct minimal_symbol *msymbol;
1991-03-28 16:26:26 +00:00
struct partial_symbol *psb;
struct obj_section *sec;
1991-03-28 16:26:26 +00:00
if (pc >= cache_pc_function_low && pc < cache_pc_function_high)
goto return_cached_value;
/* If sigtramp is in the u area, it counts as a function (especially
important for step_1). */
#if defined SIGTRAMP_START
if (IN_SIGTRAMP (pc, (char *)NULL))
1991-03-28 16:26:26 +00:00
{
cache_pc_function_low = SIGTRAMP_START;
cache_pc_function_high = SIGTRAMP_END;
cache_pc_function_name = "<sigtramp>";
goto return_cached_value;
1991-03-28 16:26:26 +00:00
}
#endif
1991-03-28 16:26:26 +00:00
msymbol = lookup_minimal_symbol_by_pc (pc);
1991-03-28 16:26:26 +00:00
pst = find_pc_psymtab (pc);
if (pst)
{
/* Need to read the symbols to get a good value for the end address. */
if (endaddr != NULL && !pst->readin)
{
/* Need to get the terminal in case symbol-reading produces
output. */
target_terminal_ours_for_output ();
PSYMTAB_TO_SYMTAB (pst);
}
1991-03-28 16:26:26 +00:00
if (pst->readin)
{
/* Checking whether the msymbol has a larger value is for the
"pathological" case mentioned in print_frame_info. */
1991-03-28 16:26:26 +00:00
f = find_pc_function (pc);
if (f != NULL
&& (msymbol == NULL
|| (BLOCK_START (SYMBOL_BLOCK_VALUE (f))
>= SYMBOL_VALUE_ADDRESS (msymbol))))
1991-03-28 16:26:26 +00:00
{
cache_pc_function_low = BLOCK_START (SYMBOL_BLOCK_VALUE (f));
cache_pc_function_high = BLOCK_END (SYMBOL_BLOCK_VALUE (f));
cache_pc_function_name = SYMBOL_NAME (f);
goto return_cached_value;
1991-03-28 16:26:26 +00:00
}
}
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
else
1991-03-28 16:26:26 +00:00
{
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
/* Now that static symbols go in the minimal symbol table, perhaps
we could just ignore the partial symbols. But at least for now
we use the partial or minimal symbol, whichever is larger. */
psb = find_pc_psymbol (pst, pc);
if (psb
&& (msymbol == NULL ||
(SYMBOL_VALUE_ADDRESS (psb)
>= SYMBOL_VALUE_ADDRESS (msymbol))))
{
/* This case isn't being cached currently. */
if (address)
*address = SYMBOL_VALUE_ADDRESS (psb);
if (name)
*name = SYMBOL_NAME (psb);
/* endaddr non-NULL can't happen here. */
return 1;
}
1991-03-28 16:26:26 +00:00
}
}
/* Not in the normal symbol tables, see if the pc is in a known section.
If it's not, then give up. This ensures that anything beyond the end
of the text seg doesn't appear to be part of the last function in the
text segment. */
sec = find_pc_section (pc);
if (!sec)
msymbol = NULL;
/* Must be in the minimal symbol table. */
if (msymbol == NULL)
1991-03-28 16:26:26 +00:00
{
/* No available symbol. */
if (name != NULL)
*name = 0;
if (address != NULL)
*address = 0;
if (endaddr != NULL)
*endaddr = 0;
return 0;
1991-03-28 16:26:26 +00:00
}
/* See if we're in a transfer table for Sun shared libs. */
if (msymbol -> type == mst_text || msymbol -> type == mst_file_text)
cache_pc_function_low = SYMBOL_VALUE_ADDRESS (msymbol);
else
/* It is a transfer table for Sun shared libraries. */
cache_pc_function_low = pc - FUNCTION_START_OFFSET;
cache_pc_function_name = SYMBOL_NAME (msymbol);
/* Use the lesser of the next minimal symbol, or the end of the section, as
the end of the function. */
if (SYMBOL_NAME (msymbol + 1) != NULL
&& SYMBOL_VALUE_ADDRESS (msymbol + 1) < sec->endaddr)
cache_pc_function_high = SYMBOL_VALUE_ADDRESS (msymbol + 1);
1991-03-28 16:26:26 +00:00
else
/* We got the start address from the last msymbol in the objfile.
So the end address is the end of the section. */
cache_pc_function_high = sec->endaddr;
return_cached_value:
1991-03-28 16:26:26 +00:00
if (address)
*address = cache_pc_function_low;
if (name)
*name = cache_pc_function_name;
if (endaddr)
*endaddr = cache_pc_function_high;
1991-03-28 16:26:26 +00:00
return 1;
}
/* Return the innermost stack frame executing inside of BLOCK,
or NULL if there is no such frame. If BLOCK is NULL, just return NULL. */
1991-03-28 16:26:26 +00:00
FRAME
block_innermost_frame (block)
struct block *block;
{
struct frame_info *fi;
register FRAME frame;
register CORE_ADDR start;
register CORE_ADDR end;
1991-03-28 16:26:26 +00:00
if (block == NULL)
return NULL;
start = BLOCK_START (block);
end = BLOCK_END (block);
1991-03-28 16:26:26 +00:00
frame = 0;
while (1)
{
frame = get_prev_frame (frame);
if (frame == 0)
return 0;
fi = get_frame_info (frame);
if (fi->pc >= start && fi->pc < end)
return frame;
}
}
* breakpoint.h (enum bptype): Add bp_hardware_watchpoint and bp_watchpoint_scope breakpoints. (struct breakpoint): Add val_chain and related_breakpoint fields for use by watchpoints. * breakpoint.c (within_scope): Delete. No longer used. (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition. (target_{remove,insert}_watchpoint): Likewise. (can_use_hardware_watchpoint): New function. (remove_breakpoint): New function to remove a single breakpoint or hardware watchpoint. (insert_breakpoints): Handle insertion of hardware watchpoints. Store a copy of the value chain derived from the watchpoint expression. (remove_breakpoints): Simplify by using remove_breakpoint. (delete_breakpoint): Likewise. (watchpoint_check): Delete the watchpoint and watchpoint scope breakpoints when the watchpoint goes out of scope. Save & restore the current frame after checking watchpoints. (breakpoint_init_inferior): Likewise (restarting the program makes all local watchpoints go out of scope). (bpstat_stop_status): Handle hardware watchpoints much like normal watchpoints. Delete the watchpoint and watchpoint scope breakpoint when the watchpoint goes out of scope. Remove and reinsert all breakpoints before returning if we stopped when a hardware watchpoint fired. (watch_command): Use a hardware watchpoint when possible. If watching a local expression, build a scope breakpoint too. (map_breakpoint_numbers): Also call given function for any related breakpoints. (disable_breakpoint): Never disable a scope breakpoint. (enable_breakpoint): Handle hardware breakpoints much like normal breakpoints, but recompute the watchpoint_scope breakpoint's frame and address (if we have an associated scope breakpoint). (read_memory_nobpt): Handle hardware watchpoints like normal watchpoints. When necessary handle watchpoint_scope breakpoints. (print_it_normal, bpstat_what, breakpoint_1, mention): Likewise. (clear_command, breakpoint_re_set_one, enable_command): Likewise. (disable_command): Likewise. * blockframe.c (find_frame_addr_in_frame_chain): New function. Extern prototype added to frame.h * infrun.c (wait_for_inferior): Set current_frame and select a frame before checking if we stopped due to a hardare watchpoint firing. Handle stepping over hardware watchpoints. (normal_stop): Remove unnecessary call to select_frame. * value.h (value_release_to_mark): Declare. * values.c (value_release_to_mark): New function. * procfs.c (procfs_wait): Add cases for hardware watchpoints. (procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions. * hppab-nat.c (hppa_set_watchpoint): New function. * config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define. (HAVE_STEPPABLE_WATCHPOINT): Define. (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define. (target_{insert,delete}_watchpoint): Define.
1994-04-13 21:57:00 +00:00
/* Return the full FRAME which corresponds to the given FRAME_ADDR
or NULL if no FRAME on the chain corresponds to FRAME_ADDR. */
FRAME
find_frame_addr_in_frame_chain (frame_addr)
FRAME_ADDR frame_addr;
{
FRAME frame = NULL;
if (frame_addr == NULL)
return NULL;
while (1)
{
frame = get_prev_frame (frame);
if (frame == NULL)
return NULL;
if (FRAME_FP (frame) == frame_addr)
return frame;
}
}
#ifdef SIGCONTEXT_PC_OFFSET
/* Get saved user PC for sigtramp from sigcontext for BSD style sigtramp. */
CORE_ADDR
sigtramp_saved_pc (frame)
FRAME frame;
{
CORE_ADDR sigcontext_addr;
char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
int ptrbytes = TARGET_PTR_BIT / TARGET_CHAR_BIT;
int sigcontext_offs = (2 * TARGET_INT_BIT) / TARGET_CHAR_BIT;
/* Get sigcontext address, it is the third parameter on the stack. */
if (frame->next)
sigcontext_addr = read_memory_integer (FRAME_ARGS_ADDRESS (frame->next)
+ FRAME_ARGS_SKIP + sigcontext_offs,
ptrbytes);
else
sigcontext_addr = read_memory_integer (read_register (SP_REGNUM)
+ sigcontext_offs,
ptrbytes);
/* Don't cause a memory_error when accessing sigcontext in case the stack
layout has changed or the stack is corrupt. */
target_read_memory (sigcontext_addr + SIGCONTEXT_PC_OFFSET, buf, ptrbytes);
return extract_unsigned_integer (buf, ptrbytes);
}
#endif /* SIGCONTEXT_PC_OFFSET */
1991-03-28 16:26:26 +00:00
void
_initialize_blockframe ()
{
obstack_init (&frame_cache_obstack);
}