old-cross-binutils/gdb/serial.c

522 lines
11 KiB
C
Raw Normal View History

/* Generic serial interface routines
Copyright 1992, 1993, 1996, 1997 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
1995-08-02 03:41:12 +00:00
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include <ctype.h>
#include "serial.h"
#include "gdb_string.h"
#include "gdbcmd.h"
/* Linked list of serial I/O handlers */
static struct serial_ops *serial_ops_list = NULL;
/* This is the last serial stream opened. Used by connect command. */
static serial_t last_serial_opened = NULL;
/* Pointer to list of scb's. */
static serial_t scb_base;
/* Non-NULL gives filename which contains a recording of the remote session,
suitable for playback by gdbserver. */
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
static char *serial_logfile = NULL;
static FILE *serial_logfp = NULL;
static struct serial_ops *serial_interface_lookup PARAMS ((char *));
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
static void serial_logchar PARAMS ((int chtype, int ch, int timeout));
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
static char logbase_hex[] = "hex";
static char logbase_octal[] = "octal";
static char logbase_ascii[] = "ascii";
static char *logbase_enums[] = {logbase_hex, logbase_octal, logbase_ascii, NULL};
static char *serial_logbase = logbase_ascii;
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
static int serial_current_type = 0;
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
/* Log char CH of type CHTYPE, with TIMEOUT */
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
/* Define bogus char to represent a BREAK. Should be careful to choose a value
that can't be confused with a normal char, or an error code. */
#define SERIAL_BREAK 1235
static void
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
serial_logchar (chtype, ch, timeout)
int chtype;
int ch;
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
int timeout;
{
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
if (chtype != serial_current_type)
{
fprintf_unfiltered (serial_logfp, "\n%c ", chtype);
serial_current_type = chtype;
}
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
if (serial_logbase != logbase_ascii)
fputc_unfiltered (' ', serial_logfp);
switch (ch)
{
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
case SERIAL_TIMEOUT:
fprintf_unfiltered (serial_logfp, "<Timeout: %d seconds>", timeout);
return;
case SERIAL_ERROR:
fprintf_unfiltered (serial_logfp, "<Error: %s>", safe_strerror (errno));
return;
case SERIAL_EOF:
fputs_unfiltered ("<Eof>", serial_logfp);
return;
case SERIAL_BREAK:
fputs_unfiltered ("<Break>", serial_logfp);
return;
default:
if (serial_logbase == logbase_hex)
fprintf_unfiltered (serial_logfp, "%02x", ch & 0xff);
else if (serial_logbase == logbase_octal)
fprintf_unfiltered (serial_logfp, "%03o", ch & 0xff);
else
switch (ch)
{
case '\\': fputs_unfiltered ("\\\\", serial_logfp); break;
case '\b': fputs_unfiltered ("\\b", serial_logfp); break;
case '\f': fputs_unfiltered ("\\f", serial_logfp); break;
case '\n': fputs_unfiltered ("\\n", serial_logfp); break;
case '\r': fputs_unfiltered ("\\r", serial_logfp); break;
case '\t': fputs_unfiltered ("\\t", serial_logfp); break;
case '\v': fputs_unfiltered ("\\v", serial_logfp); break;
default: fprintf_unfiltered (serial_logfp, isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF); break;
}
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
}
}
void
serial_log_command (cmd)
const char *cmd;
{
if (!serial_logfp)
return;
serial_current_type = 'c';
fputs_unfiltered ("\nc ", serial_logfp);
fputs_unfiltered (cmd, serial_logfp);
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
/* Make sure that the log file is as up-to-date as possible,
in case we are getting ready to dump core or something. */
gdb_flush (serial_logfp);
}
int
serial_write (scb, str, len)
serial_t scb;
const char *str;
int len;
{
if (serial_logfp != NULL)
{
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
int count;
for (count = 0; count < len; count++)
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
serial_logchar ('w', str[count] & 0xff, 0);
/* Make sure that the log file is as up-to-date as possible,
in case we are getting ready to dump core or something. */
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
gdb_flush (serial_logfp);
}
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
return (scb -> ops -> write (scb, str, len));
}
int
serial_readchar (scb, timeout)
serial_t scb;
int timeout;
{
int ch;
ch = scb -> ops -> readchar (scb, timeout);
if (serial_logfp != NULL)
{
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
serial_logchar ('r', ch, timeout);
/* Make sure that the log file is as up-to-date as possible,
in case we are getting ready to dump core or something. */
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
gdb_flush (serial_logfp);
}
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
return (ch);
}
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
int
serial_send_break (scb)
serial_t scb;
{
if (serial_logfp != NULL)
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
serial_logchar ('w', SERIAL_BREAK, 0);
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
return (scb -> ops -> send_break (scb));
}
static struct serial_ops *
serial_interface_lookup (name)
char *name;
{
struct serial_ops *ops;
for (ops = serial_ops_list; ops; ops = ops->next)
if (strcmp (name, ops->name) == 0)
return ops;
return NULL;
}
void
serial_add_interface(optable)
struct serial_ops *optable;
{
optable->next = serial_ops_list;
serial_ops_list = optable;
}
/* Open up a device or a network socket, depending upon the syntax of NAME. */
serial_t
serial_open (name)
const char *name;
{
serial_t scb;
struct serial_ops *ops;
for (scb = scb_base; scb; scb = scb->next)
if (scb->name && strcmp (scb->name, name) == 0)
{
scb->refcnt++;
return scb;
}
if (strcmp (name, "pc") == 0)
ops = serial_interface_lookup ("pc");
else if (strchr (name, ':'))
ops = serial_interface_lookup ("tcp");
else if (strncmp (name, "lpt", 3) == 0)
ops = serial_interface_lookup ("parallel");
else
ops = serial_interface_lookup ("hardwire");
if (!ops)
return NULL;
scb = (serial_t)xmalloc (sizeof (struct _serial_t));
scb->ops = ops;
scb->bufcnt = 0;
scb->bufp = scb->buf;
if (scb->ops->open(scb, name))
{
free (scb);
return NULL;
}
scb->name = strsave (name);
scb->next = scb_base;
scb->refcnt = 1;
scb_base = scb;
last_serial_opened = scb;
if (serial_logfile != NULL)
{
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
serial_logfp = gdb_fopen (serial_logfile, "w");
if (serial_logfp == NULL)
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
perror_with_name (serial_logfile);
}
return scb;
}
serial_t
serial_fdopen (fd)
const int fd;
{
serial_t scb;
struct serial_ops *ops;
for (scb = scb_base; scb; scb = scb->next)
if (scb->fd == fd)
{
scb->refcnt++;
return scb;
}
ops = serial_interface_lookup ("hardwire");
if (!ops)
return NULL;
scb = (serial_t)xmalloc (sizeof (struct _serial_t));
scb->ops = ops;
scb->bufcnt = 0;
scb->bufp = scb->buf;
scb->fd = fd;
scb->name = NULL;
scb->next = scb_base;
scb->refcnt = 1;
scb_base = scb;
last_serial_opened = scb;
return scb;
}
void
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
serial_close (scb, really_close)
serial_t scb;
int really_close;
{
serial_t tmp_scb;
last_serial_opened = NULL;
if (serial_logfp)
{
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
fputs_unfiltered ("\nEnd of log\n", serial_logfp);
serial_current_type = 0;
fclose (serial_logfp); /* XXX - What if serial_logfp == stdout or stderr? */
serial_logfp = NULL;
}
/* This is bogus. It's not our fault if you pass us a bad scb...! Rob, you
should fix your code instead. */
if (!scb)
return;
scb->refcnt--;
if (scb->refcnt > 0)
return;
if (really_close)
scb->ops->close (scb);
if (scb->name)
free (scb->name);
if (scb_base == scb)
scb_base = scb_base->next;
else
for (tmp_scb = scb_base; tmp_scb; tmp_scb = tmp_scb->next)
{
if (tmp_scb->next != scb)
continue;
tmp_scb->next = tmp_scb->next->next;
break;
}
free(scb);
}
#if 0
1993-06-09 00:41:06 +00:00
/*
The connect command is #if 0 because I hadn't thought of an elegant
way to wait for I/O on two serial_t's simultaneously. Two solutions
came to mind:
1) Fork, and have have one fork handle the to user direction,
and have the other hand the to target direction. This
obviously won't cut it for MSDOS.
2) Use something like select. This assumes that stdin and
the target side can both be waited on via the same
mechanism. This may not be true for DOS, if GDB is
talking to the target via a TCP socket.
-grossman, 8 Jun 93
*/
/* Connect the user directly to the remote system. This command acts just like
the 'cu' or 'tip' command. Use <CR>~. or <CR>~^D to break out. */
static serial_t tty_desc; /* Controlling terminal */
static void
cleanup_tty(ttystate)
serial_ttystate ttystate;
{
printf_unfiltered ("\r\n[Exiting connect mode]\r\n");
SERIAL_SET_TTY_STATE (tty_desc, ttystate);
free (ttystate);
SERIAL_CLOSE (tty_desc);
}
static void
connect_command (args, fromtty)
char *args;
int fromtty;
{
int c;
char cur_esc = 0;
serial_ttystate ttystate;
serial_t port_desc; /* TTY port */
dont_repeat();
if (args)
fprintf_unfiltered(gdb_stderr, "This command takes no args. They have been ignored.\n");
printf_unfiltered("[Entering connect mode. Use ~. or ~^D to escape]\n");
tty_desc = SERIAL_FDOPEN (0);
port_desc = last_serial_opened;
ttystate = SERIAL_GET_TTY_STATE (tty_desc);
SERIAL_RAW (tty_desc);
SERIAL_RAW (port_desc);
make_cleanup (cleanup_tty, ttystate);
while (1)
{
int mask;
mask = SERIAL_WAIT_2 (tty_desc, port_desc, -1);
if (mask & 2)
{ /* tty input */
char cx;
while (1)
{
c = SERIAL_READCHAR(tty_desc, 0);
if (c == SERIAL_TIMEOUT)
break;
if (c < 0)
perror_with_name("connect");
cx = c;
SERIAL_WRITE(port_desc, &cx, 1);
switch (cur_esc)
{
case 0:
if (c == '\r')
cur_esc = c;
break;
case '\r':
if (c == '~')
cur_esc = c;
else
cur_esc = 0;
break;
case '~':
if (c == '.' || c == '\004')
return;
else
cur_esc = 0;
}
}
}
if (mask & 1)
{ /* Port input */
char cx;
while (1)
{
c = SERIAL_READCHAR(port_desc, 0);
if (c == SERIAL_TIMEOUT)
break;
if (c < 0)
perror_with_name("connect");
cx = c;
SERIAL_WRITE(tty_desc, &cx, 1);
}
}
}
}
#endif /* 0 */
/* VARARGS */
void
#ifdef ANSI_PROTOTYPES
serial_printf (serial_t desc, const char *format, ...)
#else
serial_printf (va_alist)
va_dcl
#endif
{
va_list args;
char *buf;
#ifdef ANSI_PROTOTYPES
va_start (args, format);
#else
serial_t desc;
char *format;
va_start (args);
desc = va_arg (args, serial_t);
format = va_arg (args, char *);
#endif
vasprintf (&buf, format, args);
SERIAL_WRITE (desc, buf, strlen (buf));
free (buf);
va_end (args);
}
void
_initialize_serial ()
{
#if 0
add_com ("connect", class_obscure, connect_command,
"Connect the terminal directly up to the command monitor.\n\
Use <CR>~. or <CR>~^D to break out.");
#endif /* 0 */
add_show_from_set (add_set_cmd ("remotelogfile", no_class,
var_filename, (char *)&serial_logfile,
"Set filename for remote session recording.\n\
This file is used to record the remote session for future playback\n\
by gdbserver.", &setlist),
&showlist);
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
add_show_from_set (add_set_enum_cmd ("remotelogbase", no_class,
logbase_enums,
(char *)&serial_logbase,
"Set ...",
&setlist),
&showlist);
}