old-cross-binutils/gdb/ChangeLog

1166 lines
46 KiB
Text
Raw Normal View History

Thu Feb 24 04:29:19 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* exec.c (print_section_info): Print entry point for exec_bfd only.
* ser-unix.c (wait_for): Fix typo in HAVE_TERMIO case.
Wed Feb 23 16:28:55 1994 Jeffrey A. Law (law@cygnus.com)
* tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
(CALL_DUMMY_LENGTH): Changed accordingly.
Wed Feb 23 16:21:25 1994 Stu Grossman (grossman at cygnus.com)
* sparc-stub.c (trap_low): Make trap handler work for arbitrary
numbers of register windows.
* sparclite/hello.c: Add factorial function for testing.
* salib.c: Use macros instead of constants for I/O addresses to
make 931 support easier.
* sparclite.h: Change constraint for LOC to "rJ" to force use of
register in sta/lda instructions.
Wed Feb 23 10:39:18 1994 Jim Kingdon (kingdon@rtl.cygnus.com)
* dbxread.c (process_one_symbol): Set
block_address_function_relative for COFF like we do for ELF and SOM.
Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* mdebugread.c (new_psymtab): Pass in section_offsets and set
them in the pst.
* mdebugread.c (handle_psymbol_enumerators): New function to enter
the enumerators of an ecoff enum into the partial symbol table.
* mdebugread.c (parse_partial_symbols): Call it.
* symfile.c (reread_symbols): Initialize objfile->*_psymbols.next.
* symmisc.c (dump_psymtab): Fix typo, clean up output of section
offsets. Cast psymtab->read_symtab to PTR before passing it to
gdb_print_address.
* i386-tdep.c (i386_skip_prologue): Skip over instructions that
set up the global offset table pointer in pic compiled code.
* config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets,
error() on TYPE_CODE_FLT arguments whose size is greater than 8,
swap all other TYPE_CODE_FLT arguments as mips_push_arguments
ensures that floats are promoted to doubles before they are pushed
on the stack.
Fri Feb 18 23:12:59 1994 Stu Grossman (grossman at cygnus.com)
* sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
Fixup cache_on and flush_i_cache so that they work for both the
930 and 932 processors. Rewrite most low level funcs (uart
access & cache stuff) to use new ASI access macros in sparclite.h.
Also make it easy to access second serial port.
Fri Feb 18 22:17:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
<sys/stat.h>; not needed.
Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stack.c (print_frame_info): In "pathological" case, don't
distrust the line number information.
Fri Feb 18 16:51:14 1994 Kung Hsu (kung@mexican.cygnus.com)
* mips-tdep.c (mips_print_register): handle 64 bits register.
* valprint.c (print_longest): fix a bug in printing 64 bits value.
Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1994-02-18 22:15:01 +00:00
* Version 4.12.2.
* Makefile.in (install): Do the sed for program_transform_name
ourselves instead of worrying about INSTALL_XFORM. This enables
users to override INSTALL_PROGRAM in the standard way.
* Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
depend on Makefile.in.
* defs.h, valprint.c: Make longest_to_int a function not a macro.
Only test against INT_MIN if a LONGEST is bigger than an int.
* README: Change GhostScript to Ghostscript.
Fri Feb 18 07:30:55 1994 Jim Kingdon (kingdon@cygnus.com)
* config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
character file names.
* Makefile.in (ALLPARAM): Add these files.
* config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
character file names.
* Makefile.in: Add Kung's new mips64 files.
Thu Feb 17 17:25:47 1994 Kung Hsu (kung@mexican.cygnus.com)
* configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
mips64el-*-ecoff and mips64-big-*.
* defs.h: get rid of FORCE_LONG_LONG.
* mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
parsing. Change register size to be MIPS_REGSIZE.
Thu Feb 17 09:30:22 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c,
osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c,
xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
Fri Feb 11 21:47:24 1994 Steve Chamberlain (sac@sphagnum.cygnus.com)
* remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
(remove_commands, add_commands): Add/remove hms-drain when target
is connected.
Fri Feb 11 16:11:38 1994 Stu Grossman (grossman at cygnus.com)
* configure.in: Add Lynx/rs6000 support.
* lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error
messages. Add rs6000 support. Don't try to modify unwritable
registers.
* rs6000-nat.c: Move lots of native dependent stuff (like core
file support) from rs6000-tdep.c & xcoffexec.c to here.
* rs6000-tdep.c: Move native dependent stuff to nat.c.
* xcoffexec.c: Move native dependent stuff to nat.c.
* config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here
from tm file.
* config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're
really native.
* config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
New files to support Lynx/rs6000.
Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* README: Remove note about gcc warnings on alpha, these should be
gone now.
* c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
remote-utils.c, stabsread.c: Include <string.h>.
* regex.c: Include "defs.h", change re_comp argument to const char *.
* infptrace.c (fetch_register, store_inferior_registers): Change
regaddr to type CORE_ADDR.
* config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
Mon Feb 7 09:21:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* symtab.h: Always define BYTE_BITFIELD to nothing.
Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
* configure.in: Remove comment about m68k-em.mt.
* Makefile.in: Remove references.
Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
BFD_HOST_64_TYPE.
Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* target.c (target_preopen): If target_kill doesn't remove the
target from the stack, use pop_target to do it.
* coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar
changes to stabsread.c from summer 1993.
* remote-udi.c (udi_files_info): If prog_name is NULL, just skip
printing the program, rather than passing NULL to printf.
(udi_detach): Set udi_session_id to -1 so that udi_close doesn't
try to call UDIDisconnect again. Print better message.
(udi_kill): Just call UDIDisconnect ourselves, rather than doing
it via udi_close.
(udi_create_inferior): If udi_session_id is negative, open a new
TIP rather than giving an error.
* config/mips/mipsm3.mh, config/i386/i386m3.mh,
config/ns32k/ns32km3.mh: Define NAT_FILE.
* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
(it was inconsistent and namespace-wrong) to NM_M3_H.
* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
(m3_open): New function.
(m3_ops): Use it.
* TODO: Update Mach section.
* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com)
* printcmd.c (printf_command): Add missing single-letter
backslash-escape sequences, and improve error message.
Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* corelow.c (solib_add_stub, core_open): Pass address of from_tty
rather than trying to shove an int into a pointer and back out
again. This avoids compiler warnings.
* defs.h (alloca): Declare as void *, not char *, on hpux.
Don't prototype it, just declare the return type.
Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* config/i386/tm-sun386.h, config/i386/tm-symmetry.h
(REGISTER_CONVERT_TO_RAW): Add missing backslash.
Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
ZERO_REGNUM, just read it as zero without talking to the board.
* config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
backslash.
* i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
to store_floating, not nonexistent variable len.
* remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
New functions.
(mips_store_word): Change calling convention to return errors, and
to provide old contents if the caller wants it.
(mips_xfer_memory): Deal with errors from mips_store_word.
* config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
define now that remote-mips.c doesn't use BREAKPOINT.
* remote-mips.c (mips_create_inferior): Call warning if arguments
specified, and then execute "set args" command. Call error, not
mips_error, if executable file not specified.
* remote-e7000.c: Replace "snoop" command (e7000_noecho) with
remote_debug.
* config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
to unsigned int.
Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* value.h (print_longest): Rename "value" to "val" in prototype
declaration because some compilers don't like arguments whose
names are the same as types.
* remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
before passing it to remote_*_bytes.
Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
* h8500-tdep.c (saved_pc_after_call): The size of the
pc is memory model dependent. (segmented_command,
unsegmented_command, _initialize_h8500_tdep): New commands to
change memory model.
* remote-e7000.c (_initialize_remote_e7000): Change name of snoop
command.
* remote-hms.c (hms_load): Remove breakpoints when loaded.
(hms_wait): Use new status structure
(hms_open): Push the target here. (hms_before_main_loop): Not
here. (supply_val, hms_fetch_register, hms_store_register): Cope
with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
all registers in a compact way.
Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
as CORE_ADDR to match definition in rs6000-tdep.c.
Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs.
* dwarfread.c (add_partial_symbol): Do not enter opaque aggregate
definitions into the psymtab.
Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* m68k-stub.c: Treat mc68332 like mc68020 most places. Provide
a special exceptionSize for the 68332.
* remote-udi.c (udi_attach): If no arguments, print error.
Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com)
* Makefile.in (VERSION): Bump to 4.12.1
* NEWS, README: Update to match 4.12 release.
Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* command.c (empty_sfunc): New function.
(add_set_cmd): Use it instead of not_just_help_class_command.
(not_just_help_class_command): Change calling convention back to
what it was before yesterday's change.
* stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
of the type if present.
Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* printcmd.c (decode_format): Don't blithely set the size for
an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
* defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
If BFD64, make a LONGEST a BFD_HOST_64_BIT.
* defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
always just check against INT_MIN and INT_MAX (this also fixes things
if sizeof (long) > sizeof (int), e.g. Alpha).
* config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
Don't define LONGEST or BUILTIN_TYPE_LONGEST.
* gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
BUILTIN_TYPE_UNSIGNED_LONGEST.
* language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
longest_int and longest_unsigned_int.
* value.h (struct value): Just align to LONGEST, rather than worrying
about CC_HAS_LONG_LONG.
* valarith.c (value_binop): Figure out type ourself based on
sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The
point is that we don't depend on CC_HAS_LONG_LONG anymore.
* valprint.c (val_print_type_code_int): Just call
extract_unsigned_integer directly, rather than going through
unpack_long.
* printcmd.c (decode_format): Remove code which would sometimes
change 'g' size to 'w' for integers. print_scalar_formatted handles
printing huge integers well enough, thank you.
* command.c (add_set_cmd, not_just_help_class_command): Change
to make this the sfunc, not cfunc, since that is how we call it.
* command.h: Comment difference between sfunc and cfunc.
* demangle.c (set_demangling_command): Add third arg since that
is how it is called.
(_initialize_demangler): Use sfunc, not cfunc, for
set_demangling_command, since that is how it is called.
Remove show_demangling_command; it has no effect.
* command.c (shell_escape): Report errors correctly (with error
message from strerror).
Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
x_scnlen.l rather than x_scnlen to match corresponding change in
coff/internal.h.
Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* gdbtypes.h, ch-typeprint.c, ch-valprint.c:
Change comments regarding TYPE_CODE_BOOL.
* language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
regardless of the language.
(value_true): Just call value_logical_not regardless of language.
* coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
* language.h: Improve comment for la_builtin_type_vector.
* m2-lang.c (_initialize_m2_language): Don't add any fields to
builtin_type_m2_bool.
Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com)
* config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
Define IN_SIGTRAMP and backtrace correctly through signal handlers.
Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl
by restarting the ioctl.
Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* target.h (target_wait): Add comment about calling
return_to_top_level.
Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
additional arguments.
* xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com)
* sparc-stub.c: Remove unnecessary #include of memory.h.
Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* mips-tdep.c: Remove code which sets saved_regs from
init_extra_frame_info and put it in new function mips_find_saved_regs.
(READ_FRAME_REG): Remove macro and replace uses with the expansion.
* mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
check if it is NULL and call mips_find_saved_regs if so.
* remote-mips.c: Use unfiltered, not filtered, output most places.
* blockframe.c (get_prev_frame_info): Detect and stop an infinite
backtrace. Revise comments.
Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* mdebugread.c (parse_procedure): Remove _sigtramp kludges for
alpha and irix. The _sigtramp case has to be handled properly
in the tdep files if we have no ecoff debugging info.
* alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
without PC_REGNUM kludge.
* mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
Clean up handling of mips sigtramp frames, improve comments.
Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* paread.c (read_unwind_info): Fix typo.
* paread.c (pa_symtab_read): Update the "check_strange_names"
filter to match GCC's current output. Filter out section symbols
(which the HP linker sometimes puts in the wrong place).
Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* serial.h (SERIAL_SET_TTY_STATE): Comment return value.
* Makefile.in (TAGS): Just echo one line, rather than the whole thing.
* Makefile.in: Remove all references to sparcly-nat.c.
* Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
remote-sim.h directly, rather than via $(remote_utils_h). This avoids
duplicating serial.h and target.h.
* Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
are not used anywhere (a 5 Oct 1993 change removed the uses).
* config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
* config/m68k/es1800.mt: Add comment.
* remote-es.c: Extensive changes to update to current conventions.
* ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
to achieve the desired timeout.
* serial.h (serial_t): Add field timeout_remaining.
Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* c-exp.y (yylex): Reenable nested type code.
Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* a29k-tdep.c (examine_tag): Add comment regarding argcount.
* remote-mips.c (mips_ops): Fix docstring.
* remote-bug.c (bug_ops): Remove spurious newline from docstring.
* config/m68k/tm-monitor.h: Changes to bring this into accordance
with the old tm-m68k-em.h:
(GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
(HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
(REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
Add FIXME regarding GET_LONGJMP_TARGET.
* remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
* infptrace.c (kill_inferior): Add comments.
* main.c (quit_command): Call target_close after we kill or
detach.
* remote-udi.c (udi_close): Don't error() if QUITTING.
Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com)
* configure.in: Make m68k-coff and aout add monitor support in
addition to the standard serial support.
Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
index indexNil.
Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
* elfread.c (record_minimal_symbol_and_info),
dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* i386-stub.c: Add ".text" right before "mem_fault:".
* main.c (baud_rate): Add FIXME comment about printing -1 value.
* remote-utils.c (usage): Fix message to be accurate and conform
more closely to normal conventions.
* remote-utils.c (gr_files_info): Have the exec_bfd test control
whether to show information about exec_bfd, and not control whether
to show information about device and speed.
* remote-utils.c (gr_open): If sr_get_device returns NULL, give
usage message, don't dump core.
* remote-bug.c (bug_write_memory): Use alloca, not GCC extension
for variable size array.
(bug_fetch_register, bug_store_register): Rename "value" to
"fpreg_buf" because some compilers don't like variables whose
names are the same as types.
(bug_store_register): Use a cast when converting char * to
unsigned char *.
* symmisc.c (maintenance_print_symbols): Don't refer to the name
of the command in error message (the text was referring to the old
name of the command).
* symmisc.c (dump_symtab): Fix args to fprintf_filtered.
* c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
full details on structure elements without names. This partially
reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
of those changes was accidental.
* stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
defined, make it an error to specify a single argument which is not
a frame number.
* Makefile.in (version.c), main.c (print_gdb_version): Use
host_alias and target_alias, not host_canonical and
target_canonical, to print configuration.
Fix many sins which will come up in 32 bit x 64 bit GDB, and various miscellaneous things discovered in the process: * printcmd.c, defs.h (print_address_numeric): New function. * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print) breakpoint.c (describe_other_breakpoints, breakpoint_1, mention), cp-valprint.c (cplus_print_value), infcmd.c (jump_command), printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c: Use it. * utils.c, defs.h (gdb_print_address): New function. * expprint (dump_expression), gdbtypes.h: Use it. * breakpoint.c (describe_other_breakpoints), symmisc.c (dump_symtab, print_symbol): Use filtered not unfiltered I/O. (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well just run gdb under a debugger for this (and it had problems with printing addresses, how to print b->shadow, etc.). * buildsym.c (make_blockvector), core.c (memory_error), exec.c (print_section_info), maint.c (print_section_table), mdebugread.c (parse_procedure), solib.c, source.c, symfile.c, symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: Add comments saying code is broken. Marked with "FIXME-32x64". * dbxread.c (process_one_symbol), partial-stab.h (default), remote-vx.c (vx_run_files_info): Don't cast int being passed to local_hex_string. * symmisc.c (print_symbol): Don't cast long being passed to %lx. * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE only being a long. * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG and LOC_LOCAL. * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE. * source.c: Include <sys/types.h> regardless of USG.
1994-01-27 00:36:05 +00:00
Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
of builtin_type_long. It is necessary to get a type which is
TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
Fix many sins which will come up in 32 bit x 64 bit GDB, and various miscellaneous things discovered in the process: * printcmd.c, defs.h (print_address_numeric): New function. * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print) breakpoint.c (describe_other_breakpoints, breakpoint_1, mention), cp-valprint.c (cplus_print_value), infcmd.c (jump_command), printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c: Use it. * utils.c, defs.h (gdb_print_address): New function. * expprint (dump_expression), gdbtypes.h: Use it. * breakpoint.c (describe_other_breakpoints), symmisc.c (dump_symtab, print_symbol): Use filtered not unfiltered I/O. (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well just run gdb under a debugger for this (and it had problems with printing addresses, how to print b->shadow, etc.). * buildsym.c (make_blockvector), core.c (memory_error), exec.c (print_section_info), maint.c (print_section_table), mdebugread.c (parse_procedure), solib.c, source.c, symfile.c, symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: Add comments saying code is broken. Marked with "FIXME-32x64". * dbxread.c (process_one_symbol), partial-stab.h (default), remote-vx.c (vx_run_files_info): Don't cast int being passed to local_hex_string. * symmisc.c (print_symbol): Don't cast long being passed to %lx. * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE only being a long. * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG and LOC_LOCAL. * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE. * source.c: Include <sys/types.h> regardless of USG.
1994-01-27 00:36:05 +00:00
Fix many sins which will come up in 32 bit x 64 bit GDB, and
various miscellaneous things discovered in the process:
* printcmd.c, defs.h (print_address_numeric): New function.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
Use it.
* utils.c, defs.h (gdb_print_address): New function.
* expprint (dump_expression), gdbtypes.h: Use it.
* breakpoint.c (describe_other_breakpoints),
symmisc.c (dump_symtab, print_symbol):
Use filtered not unfiltered I/O.
(remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
just run gdb under a debugger for this (and it had problems with
printing addresses, how to print b->shadow, etc.).
* buildsym.c (make_blockvector), core.c (memory_error),
exec.c (print_section_info), maint.c (print_section_table),
mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Add comments saying code is broken. Marked with "FIXME-32x64".
* dbxread.c (process_one_symbol), partial-stab.h (default),
remote-vx.c (vx_run_files_info):
Don't cast int being passed to local_hex_string.
* symmisc.c (print_symbol): Don't cast long being passed to %lx.
* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
only being a long.
* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
and LOC_LOCAL.
* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
* source.c: Include <sys/types.h> regardless of USG.
Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* valops.c (value_assign): Set `type' after coercing toval.
* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
Use extract_unsigned_integer to get the address of a reference.
Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
AIX can use ? instead of \ for continuation. Deal with it.
* paread.c (read_unwind_info): Just assign to objfile->obj_private,
not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
the HP compiler in ANSI mode doesn't like.
* main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
based on USG, rather than defining HAVE_SIGSETMASK to an
expression containing defined. Having a macro used in #if expand
to an expression containing "defined" is undefined according to
ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
it to.
Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com)
* sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
Clean up the changes of 11 Jan, as recommended by Peter Schauer.
Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com)
* ch-exp.y (match_string_literal): Allow a zero-length string.
* ch-lang.c (chill_printstr): Don't print zero-length string funny.
Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* i386aix-nat.c (i386_float_info): Reverse order of registers before
passing them to print_387_status.
(print_387_status): Don't subtract top from 7 before using it.
* i387-tdep.c: Remove comment about AIX wanting "top" subtracted
from 7; the above explains it.
Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* mips-tdep.c (init_extra_frame_info): Use frame relative stack
pointer value when fixing up the frame at the start of a function.
Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com)
* lynx-nat.c (fetch_core_registers): Load the I & L regs for the
Sparc from the stack.
Sat Jan 22 08:30:42 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* remote-mips.c (mips_initialize): Clear mips_initializing via
cleanup chain, not directly.
* ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
of -1 mean forever, like in the HAVE_SGTTY case. Warn if we are
munging the timeout due to the limited range of c_cc[VTIME].
* fork-child.c, inferior.h (fork_inferior): New argument shell_file.
* procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
m3-nat.c (m3_create_inferior): Pass it.
* procfs.c: Remove ptrace function. It was declared in a way which
conflicted with the prototype in unistd.h on Solaris.
Sat Jan 22 01:37:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* sparc-tdep.c (frame_saved_pc): Get the pc from the saved pc
in the sigcontext if it is a signal trampoline frame.
* config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
Define for Solaris2.
Sat Jan 22 00:34:47 1994 Stu Grossman (grossman at cygnus.com)
* sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to
tm-sparc.h so they can be overridden if necessary.
Fri Jan 21 17:49:28 1994 Stu Grossman (grossman at cygnus.com)
* lynx-nat.c: Add Sparc support.
* sparcly-nat.c: Remove. It's useless.
* config/sparc/nm-sparclynx.h: Rewrite.
* config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o
with lynx-nat.o
* config/sparc/tm-sparclynx.h: Rewrite.
Fri Jan 21 19:08:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* rs6000-pinsn.c: Use the new disassembler in the opcodes
directory. Old code was discarded, since the new opcode table has
a different format.
Fri Jan 21 14:28:30 1994 Fred Fish (fnf@cygnus.com)
* Makefile.in (realclean): Remove info files per make-stds.texi.
Fri Jan 21 12:47:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
if N_SO_ADDRESS_MAYBE_MISSING is defined.
* config/sparc/tm-sun4sol2.h: Define it.
Thu Jan 20 15:04:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* printcmd.c (print_address_symbolic): Unconditionally use msymbol
if we did not find a symbol.
Fri Jan 21 08:20:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
is not defined.
* hppab-nat.c (call_ptrace): Delete redundant function.
(kill_inferior, attach, detach, child_resume): Likewise.
(child_xfer_memory): Likewise.
* hppah-nat.c (call_ptrace): Delete redundant function.
(kill_inferior, attach, detach, child_resume): Likewise.
* config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
* config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
* config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
* config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
(CHILD_XFER_MEMORY): Define.
(PT_*): Define so that generic infptrace.c code can be used.
Fri Jan 21 09:23:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* xcoffread.c (xcoff_symfile_read): Make second parameter a
struct section_offsets *, not a (nonexistent) struct section_offset *.
* xcoffread.c (read_xcoff_symtab): Make main_aux just a union
internal_xcoff_symtab, not an array of one of them. Change lots of
"main_aux" to "&main_aux" and so on.
* coffread.c, xcoffread.c: Include <coff/internal.h>
before "symfile.h".
Thu Jan 20 17:30:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* coffread.c (coff_getfilename): Make it not static.
* xcoffread.c (read_xcoff_symtab): complain() not abort().
* xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
a completely gratuitous difference between xcoffread.c and coffread.c).
Wed Jan 19 15:09:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* infrun.c (wait_for_inferior): Don't set frame for
step_resume_breakpoint for IN_SIGTRAMP cases.
* infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
breakpoint.c (bpstat_what): Move step_resume from its own field of
the struct bpstat_what into the main_action. Make it override
other breakpoints. This is a conservative change in the sense
that before the step resume breakpoint was a breakpoint.c
breakpoint, hitting the step resume breakpoint overrode even
calling bpstat_stop_status.
Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (normal_stop): Set stop_pc after popping the dummy frame
in case execution was stopped in the called function.
* stack.c (print_frame_info, frame_info): If backtracing through
a call dummy, handle the starting source line number on a line
boundary like backtracing through sigtramp.
* sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address
for call dummy frame right. Remove old test for dummy frame,
it has been unused at least since gdb-3.5.
* sparc-tdep.c (sparc_push_dummy_frame): Set return address register
of the dummy frame.
Tue Jan 18 16:16:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* infcmd.c (signal_command): Accept 0 as legitimate signal number.
Tue Jan 18 14:09:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (signals_info), target.c (target_signal_from_name):
Use ugly casts to avoid enumvar < enumvar or enumvar++.
Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
* inflow.c (terminal_ours_1): When discussing how to deal with the
tty state, make note of query() as well as readline.
* infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
signals for which stop and print are cleared by default.
Mon Jan 17 20:00:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/pa/tm-hppa.h (unwind_table_entry): Use one of the
reserved fields to hold a stub unwind entry type. Fix typo.
(stub_unwind_entry): New structure for raw stub unwind entries.
(stub_unwind_types): The types of stubs we may encounter.
(UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
* hppa-tdep.c (rp_saved): Use additional information provided
by linker stub unwind descriptors.
(frameless_function_invocation): Likewise.
(frame_chain_valid): Likewise.
* paread.c (compare_unwind_entries): New function for sorting
unwind table entries.
(read_unwind_info): Rewrite to remove dependency on host endianness.
Read in data from the $UNWIND_END$ subspace which contains linker
stub unwind descriptors. Merge that data into the basic unwind
table.
* hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
from either the symbol name or the auxent.
* coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
no longer static.
Mon Jan 17 13:35:01 1994 Fred Fish (fnf@cygnus.com)
* Makefile.in (ALLPARAM): Change irix5.h to nm-irix5.h.
1994-01-17 17:18:18 +00:00
Mon Jan 17 12:35:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* README: Update notes for alpha port.
Mon Jan 17 11:15:57 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
for operation fault, constraint fault, and type fault.
1994-01-16 17:47:47 +00:00
Sun Jan 16 12:46:01 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* Makefile.in (init.c): Add comment explaining formatting conventions.
* c-exp.y (parse_number): Assign to temporary between the right
shifts, to work around a bug in the SCO compiler.
* Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
Add various files which were added to GDB recently.
* xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
within_function.
1994-01-16 17:47:47 +00:00
* Makefile.in: Add mostlyclean target.
1994-01-16 03:43:22 +00:00
Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* Version 4.11.4.
Sat Jan 15 18:27:34 1994 Per Bothner (bothner@kalessin.cygnus.com)
* main.c (show_commands): Make return type of extern
history_get be HIST_ENTRY, rather than struct _hist_entry.
(The latter loses with the upcoming merged readline.)
Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
const char *, not char *.
* symtab.h (struct symbol): Make section short, not unsigned short.
* symtab.c (lookup_symbol): Add comment about QUIT here.
* utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
* c-exp.y (parse_number): Check for overflow regardless of range
checking. Fix overflow check to use unsigned LONGEST, not
unsigned int.
* c-exp.y (parse_number): Make it so that integer constants are
builtin_type_long_long if builtin_type_long isn't big enough or if
an "LL" suffix is used. Properly handle "UL" or "LU" suffixes.
* c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
Print our "()" first, then recurse for the target type.
Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* remote-udi.c (udi_create_inferior): Quote empty execfile argument.
* gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* utils.c (request_quit): Re-establish signal handler regardless
of USG.
* config/mips/xm-irix4.h: Define HAVE_TERMIOS.
1994-01-15 02:56:47 +00:00
Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* i960-tdep.c: Include target.h.
Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com)
* lynx-nat.c (sys/wait.h): Don't use absolute pathname.
Fri Jan 14 11:06:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
changes (status -> ourstatus; declare status, etc.).
* config/nm-lynx.h: Fix child_wait prototype and include target.h.
Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* Makefile.in (ALLPARAM): Add config/nm-lynx.h.
Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* remote-mips.c (mips_request, mips_wait): Correct prototypes.
Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* config/i386/xm-linux.h: Define HAVE_TERMIOS.
Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment.
Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN.
* mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
writing it.
Add search to target vector (#if 0'd until after 4.12):
* target.h (to_search, target_search): Add.
* gdbcore.h, core.c (generic_search): Add.
* remote.c (remote_search): Add.
* a29k-tdep.c (init_frame_info): Use target_search to find traceback
tag.
* printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
is on, call find_pc_function rather than relying just on the minimal
symbols (probably only matters for symbol readers which don't put
statics in the minimal symbols, but changing this strikes me as
not conservative enough).
Initialize name_location in all cases.
If no symbol and no msymbol, don't print anything symbolic.
* a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com)
* printcmd.c (print_address_symbolic): Make it search the
symtabs for variables as well as functions. Add `set print
fast-symbolic-addr' and default it to fast (the old way).
Print line numbers for data items as well as functions.
* symtab.c (find_addr_symbol): Return the symtab and the symbol
address, if a symbol is found (take two more args pointing to
where to store these results).
* symtab.h (find_addr_symbol): Add prototype.
Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* objfiles.h: Fix comments to reflect the fact that the phrase
"top of stack" always refers to where the pushing and popping takes
place, regardless of whether it is at the highest or lowest address.
Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for
compiler generated tag names.
* mdebugread.c (parse_type): Handle cross references to qualified
aggregate types.
* valops.c (value_struct_elt): Improve error message if the
address of a method is requested from an object instance.
* valops.c (search_struct_method): Make name_matched non-static
to get it initialized correctly.
* config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to
exclude segment register which are not writable on newer SCO versions.
Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* go32-xdep.c: Remove unused function uerror.
(sigsetmask): Declare return type. Declare argument (to match the
way it is called). Explicitly return 0.
Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com)
* symtab.h (struct symbol, general_symbol_info, minimal_symbol,
partial_symbol): Shrink the storage sizes of symbols, by making
enums into 1-byte bitfields when compiled __GNUC__, moving all the
enums and small ints to the end of each struct to improve
alignment, and switching the section number from int to unsigned
short.
Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com)
* symtab.c (find_addr_symbol): New routine that will find the nearest
symbol associated with an address. It does so by exhaustive
search of the symtabs, so it's slow but complete.
Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com)
* coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab
to [0,0] rather than [0, end of first source file]. This avoids
problems with other parts of GDB looking for linetables in the
_globals_ symtab. Eliminate variables num_object_files and
first_object_file_end.
Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
* a29k-tdep.c (init_frame_info): Cast null arg to examine_tag.
(pop_frame): Restore PC2 and LR0 from dummy frames.
(push_dummy_frame): Save PC2 and LR0 into dummy frames.
(setup_arbitrary_frame): Handle 3 args and set up real frames.
* config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
(DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
(SETUP_ARBITRARY_FRAME): Define.
Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* remote-udi.c (udi_resume): Correct prototype.
Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
hppa_frame_find_saved_regs.
* hppa-tdep.c (dig_fp_from_stack): Delete function.
(prologue_inst_adjust_sp): New function.
(is_branch, inst_saves_gr, inst_saves_fr): New functions.
(skip_prologue): Completely rewrite to use unwind information.
(hppa_frame_find_saved_regs): Likewise.
Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
to convert a signal number with appropriate bounds checking.
* remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
* stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined,
print a newline to end the display anyway.
* sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and
coprocessor status regs) when popping a frame. This fixes
float exceptions that occur after calling inferior functions.
* sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
Read and write the fsr (float status register) to/from the child
process along with the float regs. Remove Peter Schauer's change
of May 24 '93, which has higher overhead and doesn't solve the
real problem (which was that FSR wasn't being set).
Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com)
* a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ
stack overflow check isn't right after the register stack
adjustment instruction. Metaware R2.3u compiler moves other
things in front of it. This fix isn't perfect but is what's
running.
Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
* config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
character filenames.
* configure.in: Change accordingly.
Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com)
* m68k-stub.c, sparc-stub.c: removed spurious introduction of
_filtered io routines from these two files.
Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
* mdebugread.c (parse_symbol): Handle enum sh.type produced by
DEC c89.
* mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
printing to gdb_stderr.
* remote-udi.c (udi_kill): Don't close the connection, just set
inferior_pid to zero.
(udi_mourn): Call remove_breakpoints.
* remote-udi.c: Remove obsolete need_artificial_traps comment.
* i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
* symtab.c (lookup_symbol): Don't try adding .c to the name.
* remote-bug.c: At the start of each section, reset srec_frame
back to 160.
* target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
* target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
* infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
code which looks for those two waitkinds. Use switch statement.
* config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
CHILD_SPECIAL_WAITSTATUS.
* procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
* Move target_signal_from_host, target_signal_to_host, and
store_waitstatus from inftarg.c to target.c. procfs needs them.
* target.c: Include "wait.h" and <signal.h>.
* target.h, infrun.c (proceed), proceed callers: Pass new code
TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
enums being treated as unsigned and is cleaner.
* infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
TARGET_SIGNAL_0.
* infcmd.c (signal_command), infrun.c (signals_info):
Don't allow user to specify numeric equivalent of
TARGET_SIGNAL_DEFAULT.
Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com)
* config/alpha/alpha-netware.mt: New target support for Alpha
running Netware.
* configure.in: Add alpha-*-netware* target.
Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com)
* remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* target.h: Add enum target_waitkind, enum target_signal, and
struct target_waitstatus. Change status argument to target_wait to
be struct target_waitstatus * instead of int *.
* target.h, infrun.c, all targets: Change type of signal arguments
to resume(), proceed(), and target_resume() from int to enum
target_signal.
* All targets (*_wait, *_resume): Change accordingly.
* infcmd.c (program_info, signal_command), throughout infrun.c,
* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
signal code stuff right with the new signals would be non-trivial).
* inferior.h (stop_signal): Make it enum target_signal not int.
* target.c, target.h (target_signal_to_string, target_signal_to_name,
target_signal_from_name): New functions.
* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
store_waitstatus): New functions.
* procfs.c (procfs_notice_signals): Use them.
* i960-tdep.c (i960_fault_to_signal): New function, to replace
print_fault.
* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
* objfiles.c (build_objfile_section_table): Don't abort() if
objfile->sections is already set.
* objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
to match recent change to exec.c.
* Version 4.11.3.
* main.c (print_gdb_version): Change year to 1994.
* ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
* Makefile.in (NONSRC): Add ChangeLog-93.
Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* stabsread.c (read_type): Allow defining several type numbers
at once (e.g. "(1,2)=(3,4)="...).
* stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
* breakpoint.c (frame_in_dummy): Check PC as well as frame.
Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols
to process_one_symbol.
* symtab.c (find_pc_psymbol): Search global_psymbols as well to
avoid caching a bad endaddr in find_pc_partial_function.
Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
* config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (wait_for_inferior): Do not step or step resume past
the end of a one-line function we just stepped into.
For older changes see ChangeLog-93
1991-03-28 16:26:26 +00:00
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: