2008-01-01 22:53:26 +00:00
# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2007, 2008
2001-03-06 08:22:02 +00:00
# Free Software Foundation, Inc.
1999-04-16 01:35:26 +00:00
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
2007-08-23 18:14:19 +00:00
# the Free Software Foundation; either version 3 of the License, or
1999-04-16 01:35:26 +00:00
# (at your option) any later version.
2007-08-23 18:14:19 +00:00
#
1999-04-16 01:35:26 +00:00
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
2007-08-23 18:14:19 +00:00
#
1999-04-16 01:35:26 +00:00
# You should have received a copy of the GNU General Public License
2007-08-23 18:14:19 +00:00
# along with this program. If not, see <http://www.gnu.org/licenses/>.
1999-04-16 01:35:26 +00:00
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was written by Fred Fish. (fnf@cygnus.com)
if $tracelevel then {
strace $tracelevel
}
set prms_id 0
set bug_id 0
set testfile "watchpoint"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
1999-06-28 16:06:02 +00:00
set wp_set 1
1999-04-16 01:35:26 +00:00
if [get_compiler_info ${binfile}] {
return -1
}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
2006-08-10 05:27:22 +00:00
untested watchpoint.exp
return -1
1999-04-16 01:35:26 +00:00
}
# Prepare for watchpoint tests by setting up two breakpoints and one
# watchpoint.
#
# We use breakpoints at marker functions to get past all the startup code,
# so we can get to the watchpoints in a reasonable amount of time from a
# known starting point.
#
# For simplicity, so we always know how to reference specific breakpoints or
# watchpoints by number, we expect a particular ordering and numbering of
# each in the combined breakpoint/watchpoint table, as follows:
#
# Number What Where
# 1 Breakpoint marker1()
# 2 Breakpoint marker2()
# 3 Watchpoint ival3
proc initialize {} {
global gdb_prompt
global hex
global decimal
global srcfile
1999-06-28 16:06:02 +00:00
global wp_set
1999-04-16 01:35:26 +00:00
2000-11-14 22:12:26 +00:00
# Disable hardware watchpoints if necessary.
if [target_info exists gdb,no_hardware_watchpoints] {
gdb_test "set can-use-hw-watchpoints 0" "" ""
}
1999-04-16 01:35:26 +00:00
if [gdb_test "break marker1" "Breakpoint 1 at $hex: file .*$srcfile, line $decimal.*" "set breakpoint at marker1" ] {
return 0;
}
if [gdb_test "break marker2" "Breakpoint 2 at $hex: file .*$srcfile, line $decimal.*" "set breakpoint at marker2" ] {
return 0;
}
if [gdb_test "info break" "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*" "info break in watchpoint.exp" ] {
return 0;
}
1999-06-28 16:06:02 +00:00
# ??rehrauer: To fix DTS #CHFts23014, in which setting a watchpoint
1999-08-02 23:48:37 +00:00
# before running can cause the inferior to croak on HP-UX 11.0 for
# reasons yet unknown, we've disabled the ability to set watches
# without a running inferior. Verify the restriction.
1999-06-28 16:06:02 +00:00
#
send_gdb "watch ival3\n"
gdb_expect {
-re ".*\[Ww\]atchpoint 3: ival3.*$gdb_prompt $" {
pass "set watchpoint on ival3"
}
-re "warning: can't do that without a running program; try \"break main\", \"run\" first.*$gdb_prompt $" {
pass "set watchpoint on ival3"
set wp_set 0
return 1
}
timeout {
fail "(timeout) set watchpoint on ival3"
return 0
}
1999-04-16 01:35:26 +00:00
}
# "info watch" is the same as "info break"
if [gdb_test "info watch" "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n3\[ \]*.*watchpoint.*ival3" "watchpoint found in watchpoint/breakpoint table" ] {
return 0;
}
# After installing the watchpoint, we disable it until we are ready
# to use it. This allows the test program to run at full speed until
# we get to the first marker function.
if [gdb_test "disable 3" "disable 3\[\r\n\]+" "disable watchpoint" ] {
return 0;
}
return 1
}
#
# Test simple watchpoint.
#
proc test_simple_watchpoint {} {
global gdb_prompt
global hex
global decimal
1999-06-28 16:06:02 +00:00
global wp_set
1999-04-16 01:35:26 +00:00
# Ensure that the watchpoint is disabled when we startup.
1999-06-28 16:06:02 +00:00
if { $wp_set } {
if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint in test_simple_watchpoint" ] {
return 0;
}
1999-04-16 01:35:26 +00:00
}
# Run until we get to the first marker function.
gdb_run_cmd
set timeout 600
gdb_expect {
-re "Breakpoint 1, marker1 .*$gdb_prompt $" {
pass "run to marker1 in test_simple_watchpoint"
}
-re ".*$gdb_prompt $" {
fail "run to marker1 in test_simple_watchpoint"
return
}
timeout {
fail "run to marker1 in test_simple_watchpoint (timeout)"
return
}
}
1999-06-28 16:06:02 +00:00
if { !$wp_set } {
# ??rehrauer: To fix DTS #CHFts23014, in which setting a watchpoint
1999-08-02 23:48:37 +00:00
# before running can cause the inferior to croak on HP-UX 11.0
# for reasons yet unknown, we've disabled the ability to set
1999-06-28 16:06:02 +00:00
# watches without a running inferior. The following testpoints used
# to be in [initialize].
#
send_gdb "watch ival3\n"
gdb_expect {
-re ".*\[Ww\]atchpoint 3: ival3\r\n$gdb_prompt $" {
pass "set watchpoint on ival3"
}
-re ".*$gdb_prompt $" { fail "set watchpoint on ival3" }
timeout { fail "set watchpoint on ival3 (timeout)" }
}
set wp_set 1
# "info watch" is the same as "info break"
send_gdb "info watch\n"
gdb_expect {
-re "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n3\[ \]*.*watchpoint.*ival3\r\n$gdb_prompt $" {
pass "watchpoint found in watchpoint/breakpoint table"
}
-re ".*$gdb_prompt $" {
fail "watchpoint found in watchpoint/breakpoint table"
}
timeout {
fail "watchpoint found in watchpoint/breakpoint table"
}
}
# After installing the watchpoint, we disable it until we are ready
# to use it. This allows the test program to run at full speed until
# we get to the first marker function.
send_gdb "disable 3\n"
gdb_expect {
-re "disable 3\[\r\n\]+$gdb_prompt $" { pass "disable watchpoint" }
-re ".*$gdb_prompt $" { fail "disable watchpoint" }
timeout { fail "disable watchpoint (timeout)" }
}
}
1999-04-16 01:35:26 +00:00
# After reaching the marker function, enable the watchpoint.
if [gdb_test "enable 3" "^enable 3\[\r\n\]+" "enable watchpoint" ] {
return ;
}
gdb_test "break func1" "Breakpoint.*at.*"
gdb_test "set \$func1_breakpoint_number = \$bpnum" ""
gdb_test "continue" "Continuing.*Breakpoint \[0-9\]*, func1.*" \
"continue to breakpoint at func1"
# Continue until the first change, from -1 to 0
send_gdb "cont\n"
gdb_expect {
-re "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count; ival4 = count;.*$gdb_prompt $" {
pass "watchpoint hit, first time"
}
-re "Continuing.*Breakpoint.*func1.*$gdb_prompt $" {
setup_xfail "m68*-*-*" 2597
fail "thought it hit breakpoint at func1 twice"
gdb_test "delete \$func1_breakpoint_number" ""
gdb_test "continue" "\
Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count;" \
"watchpoint hit, first time"
}
-re ".*$gdb_prompt $" { fail "watchpoint hit, first time" ; return }
timeout { fail "watchpoint hit, first time (timeout)" ; return }
eof { fail "watchpoint hit, first time (eof)" ; return }
}
1999-12-07 03:56:43 +00:00
# Check that the hit count is reported correctly
gdb_test "info break" ".*watchpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+ival3\r\n\[ \t]+breakpoint already hit 1 time.*" "Watchpoint hit count is 1"
1999-04-16 01:35:26 +00:00
gdb_test "delete \$func1_breakpoint_number" ""
# Continue until the next change, from 0 to 1.
gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 0.*New value = 1.*ival3 = count; ival4 = count;.*" "watchpoint hit, second time"
1999-12-07 03:56:43 +00:00
# Check that the hit count is reported correctly
gdb_test "info break" ".*watchpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+ival3\r\n\[ \t]+breakpoint already hit 2 times.*" "Watchpoint hit count is 2"
1999-04-16 01:35:26 +00:00
# Continue until the next change, from 1 to 2.
gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 1.*New value = 2.*ival3 = count; ival4 = count;.*" "watchpoint hit, third time"
1999-12-07 03:56:43 +00:00
# Check that the hit count is reported correctly
gdb_test "info break" ".*watchpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+ival3\r\n\[ \t]+breakpoint already hit 3 times.*" "Watchpoint hit count is 3"
1999-04-16 01:35:26 +00:00
# Continue until the next change, from 2 to 3.
gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 2.*New value = 3.*ival3 = count; ival4 = count;.*" "watchpoint hit, fourth time"
1999-12-07 03:56:43 +00:00
# Check that the hit count is reported correctly
gdb_test "info break" ".*watchpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+ival3\r\n\[ \t]+breakpoint already hit 4 times.*" "Watchpoint hit count is 4"
1999-04-16 01:35:26 +00:00
# Continue until the next change, from 3 to 4.
# Note that this one is outside the loop.
gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 3.*New value = 4.*ival3 = count; ival4 = count;.*" "watchpoint hit, fifth time"
1999-12-07 03:56:43 +00:00
# Check that the hit count is reported correctly
gdb_test "info break" ".*watchpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+ival3\r\n\[ \t]+breakpoint already hit 5 times.*" "Watchpoint hit count is 5"
1999-04-16 01:35:26 +00:00
# Continue until we hit the finishing marker function.
# Make sure we hit no more watchpoints.
gdb_test "cont" "Continuing.*Breakpoint.*marker2 \(\).*" \
"continue to marker2"
# Disable the watchpoint so we run at full speed until we exit.
if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "watchpoint disabled" ] {
return ;
}
# Run until process exits.
if [target_info exists gdb,noresults] { return }
1999-04-26 18:34:20 +00:00
gdb_continue_to_end "continue to exit in test_simple_watchpoint"
1999-04-16 01:35:26 +00:00
}
# Test disabling watchpoints.
proc test_disabling_watchpoints {} {
global gdb_prompt
global binfile
global srcfile
global decimal
global hex
1999-06-28 16:06:02 +00:00
# "info watch" is the same as "info break"
gdb_test "info watch" "\[0-9\]+\[ \]*breakpoint.*marker1.*\r\n\[0-9\]+\[ \]*breakpoint.*marker2.*\r\n\[0-9]+\[ \]*.*watchpoint.*ival3\r\n\.*\[0-9\]+ times.*" "watchpoints found in watchpoint/breakpoint table"
1999-04-16 01:35:26 +00:00
# Ensure that the watchpoint is disabled when we startup.
if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint in test_disabling_watchpoints" ] {
return 0;
}
# Run until we get to the first marker function.
gdb_run_cmd
set timeout 600
gdb_expect {
-re "Breakpoint 1, marker1 .*$gdb_prompt $" {
pass "run to marker1 in test_disabling_watchpoints"
}
-re ".*$gdb_prompt $" {
fail "run to marker1 in test_disabling_watchpoints"
return
}
timeout {
fail "run to marker1 in test_disabling_watchpoints (timeout)"
return
}
}
# After reaching the marker function, enable the watchpoint.
if [gdb_test "enable 3" "^enable 3\[\r\n\]+" "watchpoint enabled" ] {
return ;
}
# Continue until the first change, from -1 to 0
# Don't check the old value, because on VxWorks the variable value
# will not have been reinitialized.
gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = .*New value = 0.*ival3 = count; ival4 = count;.*" "watchpoint hit in test_disabling_watchpoints, first time"
# Continue until the next change, from 0 to 1.
gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 0.*New value = 1.*ival3 = count; ival4 = count;.*" "watchpoint hit in test_disabling_watchpoints, second time"
# Disable the watchpoint but leave breakpoints
if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint #2 in test_disabling_watchpoints" ] {
return 0;
}
# Check watchpoint list, looking for the entry that confirms the
# watchpoint is disabled.
1999-06-28 16:06:02 +00:00
gdb_test "info watchpoints" "\[0-9]+\[ \]*.*watchpoint\[ \]*keep\[ \]*n\[ \]*ival3\r\n.*" "watchpoint disabled in table"
1999-04-16 01:35:26 +00:00
# Continue until we hit the finishing marker function.
# Make sure we hit no more watchpoints.
gdb_test "cont" "Continuing.*Breakpoint.*marker2 \\(\\).*" \
"disabled watchpoint skipped"
if [target_info exists gdb,noresults] { return }
1999-04-26 18:34:20 +00:00
gdb_continue_to_end "continue to exit in test_disabling_watchpoints"
1999-04-16 01:35:26 +00:00
}
# Test stepping and other mundane operations with watchpoints enabled
proc test_stepping {} {
global gdb_prompt
if [runto marker1] then {
gdb_test "watch ival2" ".*\[Ww\]atchpoint \[0-9\]*: ival2"
# Well, let's not be too mundane. It should be a *bit* of a challenge
gdb_test "break func2 if 0" "Breakpoint.*at.*"
gdb_test "p \$func2_breakpoint_number = \$bpnum" " = .*"
1999-06-28 16:06:02 +00:00
gdb_test "p func1 ()" "= 73" \
2004-03-22 14:24:18 +00:00
"calling function with watchpoint enabled"
1999-04-16 01:35:26 +00:00
#
# "finish" brings us back to main.
# On some targets (e.g. alpha) gdb will stop from the finish in midline
# of the marker1 call. This is due to register restoring code on
# the alpha and might be caused by stack adjustment instructions
# on other targets. In this case we will step once more.
#
send_gdb "finish\n"
gdb_expect {
1999-10-12 04:37:53 +00:00
-re "Run.*exit from.*marker1.* at" {
pass "finish from marker1"
}
2000-02-05 07:30:26 +00:00
default { fail "finish from marker1 (timeout)" ; return }
1999-04-16 01:35:26 +00:00
}
gdb_expect {
-re "marker1 \\(\\);.*$gdb_prompt $" {
send_gdb "step\n"
exp_continue
}
-re "func1 \\(\\);.*$gdb_prompt $" {
2000-02-05 07:30:26 +00:00
pass "back at main from marker1"
1999-04-16 01:35:26 +00:00
}
-re ".*$gdb_prompt $" {
2000-02-05 07:30:26 +00:00
fail "back at main from marker1"
1999-04-16 01:35:26 +00:00
}
2000-02-05 07:30:26 +00:00
default { fail "back at main from marker1 (timeout)" ; return }
1999-04-16 01:35:26 +00:00
}
gdb_test "next" "for \\(count = 0.*" "next to `for' in watchpoint.exp"
# Now test that "until" works. It's a bit tricky to test
# "until", because compilers don't always arrange the code
# exactly the same way, and we might get slightly different
# sequences of statements. But the following should be true
# (if not it is a compiler or a debugger bug): The user who
# does "until" at every statement of a loop should end up
# stepping through the loop once, and the debugger should not
# stop for any of the remaining iterations.
gdb_test "until" "ival1 = count.*" "until to ival1 assignment"
gdb_test "until" "ival3 = count.*" "until to ival3 assignment"
send_gdb "until\n"
gdb_expect {
-re "(for \\(count = 0|\}).*$gdb_prompt $" {
gdb_test "until" "ival1 = count; /. Outside loop ./" \
"until out of loop"
}
-re "ival1 = count; /. Outside loop ./.*$gdb_prompt $" {
pass "until out of loop"
}
-re ".*$gdb_prompt $" {
fail "until out of loop"
}
1999-12-14 01:06:04 +00:00
default { fail "until out of loop (timeout)" ; return }
1999-04-16 01:35:26 +00:00
}
gdb_test "step" "ival2 = count.*" "step to ival2 assignment"
}
}
# Test stepping and other mundane operations with watchpoints enabled
proc test_watchpoint_triggered_in_syscall {} {
global gdb_prompt
2000-11-14 22:12:26 +00:00
# These tests won't work without printf support.
if [gdb_skip_stdio_test "watchpoints triggered in syscall"] {
return;
1999-04-16 01:35:26 +00:00
}
# Run until we get to the first marker function.
set x 0
set y 0
set testname "Watch buffer passed to read syscall"
if [runto marker2] then {
gdb_test "watch buf\[0\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[0\\\]"
gdb_test "watch buf\[1\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[1\\\]"
gdb_test "watch buf\[2\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[2\\\]"
gdb_test "watch buf\[3\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[3\\\]"
gdb_test "watch buf\[4\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[4\\\]"
gdb_test "break marker4" ".*Breakpoint.*"
gdb_test "set doread = 1" ""
# If we send_gdb "123\n" before gdb has switched the tty, then it goes
# to gdb, not the inferior, and we lose. So that is why we have
# watchpoint.c prompt us, so we can wait for that prompt.
send_gdb "continue\n";
gdb_expect {
-re "Continuing\\.\r\ntype stuff for buf now:" {
pass "continue to read"
}
default {
fail "continue to read";
return ;
}
}
send_gdb "123\n"
gdb_expect {
-re ".*\[Ww\]atchpoint.*buf\\\[0\\\].*Old value = 0.*New value = 49\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
-re ".*\[Ww\]atchpoint.*buf\\\[1\\\].*Old value = 0.*New value = 50\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
-re ".*\[Ww\]atchpoint.*buf\\\[2\\\].*Old value = 0.*New value = 51\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
-re ".*\[Ww\]atchpoint.*buf\\\[3\\\].*Old value = 0.*New value = 10\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
-re ".*$gdb_prompt $" { pass "sent 123" }
timeout { fail "sent 123 (timeout)" }
}
# Examine the values in buf to see how many watchpoints we
# should have printed.
send_gdb "print buf\[0\]\n"
gdb_expect {
-re ".*= 49.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[0\]"}
-re ".*= 0.*$gdb_prompt $" { pass "print buf\[0\]"}
-re ".*$gdb_prompt $" { fail "print buf\[0\]"}
default { fail "print buf\[0\]"}
}
send_gdb "print buf\[1\]\n"
gdb_expect {
-re ".*= 50.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[1\]"}
-re ".*= 0.*$gdb_prompt $" { pass "print buf\[1\]"}
-re ".*$gdb_prompt $" { fail "print buf\[1\]"}
default { fail "print buf\[1\]"}
}
send_gdb "print buf\[2\]\n"
gdb_expect {
-re ".*= 51.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[2\]"}
-re ".*= 0.*$gdb_prompt $" { pass "print buf\[2\]"}
-re ".*$gdb_prompt $" { fail "print buf\[2\]"}
default { fail "print buf\[2\]"}
}
send_gdb "print buf\[3\]\n"
gdb_expect {
-re ".*= 10.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[3\]"}
-re ".*= 0.*$gdb_prompt $" { pass "print buf\[3\]"}
-re ".*$gdb_prompt $" { fail "print buf\[3\]" }
default { fail "print buf\[3\]" }
}
# Did we find what we were looking for? If not, flunk it.
if [expr $x==$y] then { pass $testname } else { fail "$testname (only triggered $x watchpoints, expected $y)"}
# Continue until we hit the finishing marker function.
# Make sure we hit no more watchpoints.
gdb_test "cont" "Continuing.*Breakpoint.*marker4 \\(\\).*" \
"continue to marker4"
# Disable everything so we can finish the program at full speed
gdb_test "disable" "" "disable in test_watchpoint_triggered_in_syscall"
if [target_info exists gdb,noresults] { return }
1999-04-26 18:34:20 +00:00
gdb_continue_to_end "continue to exit in test_watchpoint_triggered_in_syscall"
1999-04-16 01:35:26 +00:00
}
}
# Do a simple test of of watching through a pointer when the pointer
# itself changes. Should add some more complicated stuff here.
proc test_complex_watchpoint {} {
global gdb_prompt
if [runto marker4] then {
gdb_test "watch ptr1->val" ".*\[Ww\]atchpoint \[0-9\]*: ptr1->val"
gdb_test "break marker5" ".*Breakpoint.*"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ptr1->val.*Old value = 1.*New value = 2.*" "Test complex watchpoint"
# Continue until we hit the marker5 function.
# Make sure we hit no more watchpoints.
gdb_test "cont" "Continuing.*Breakpoint.*marker5 \\(\\).*" \
"did not trigger wrong watchpoint"
1999-06-28 16:06:02 +00:00
# Test watches of things declared locally in a function.
# In particular, test that a watch of stack-based things
# is deleted when the stack-based things go out of scope.
#
gdb_test "disable" "" "disable in test_complex_watchpoint"
gdb_test "break marker6" ".*Breakpoint.*"
gdb_test "cont" "Continuing.*Breakpoint.*marker6 \\(\\).*" \
"continue to marker6"
gdb_test "break func2" ".*Breakpoint.*"
gdb_test "cont" "Continuing.*func2.*"
# Test a watch of a single stack-based variable, whose scope
# is the function we're now in. This should auto-delete when
# execution exits the scope of the watchpoint.
#
gdb_test "watch local_a" ".*\[Ww\]atchpoint \[0-9\]*: local_a" "set local watch"
gdb_test "cont" "\[Ww\]atchpoint.*local_a.*" "trigger local watch"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint .* deleted because the program has left the block in.*which its expression is valid.*" "self-delete local watch"
gdb_test "cont" "Continuing.*func2.*"
# We should be in "func2" again now. Test a watch of an
# expression which includes both a stack-based local and
# something whose scope is larger than this invocation
# of "func2". This should also auto-delete.
#
gdb_test "watch local_a + ival5" ".*\[Ww\]atchpoint \[0-9\]*: local_a . ival5" \
"set partially local watch"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: local_a . ival5.*" \
"trigger1 partially local watch"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: local_a . ival5.*" \
"trigger2 partially local watch"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint .* deleted because the program has left the block in.*which its expression is valid.*" \
"self-delete partially local watch"
# We should be in "func2" again now. Test a watch of a
# static (non-stack-based) local. Since this has scope
# across any invocations of "func2", it should not auto-
# delete.
#
gdb_test "cont" "Continuing.*func2.*"
gdb_test "watch static_b" ".*\[Ww\]atchpoint \[0-9\]*: static_b" \
"set static local watch"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: static_b.*" \
"trigger static local watch"
gdb_test "cont" "Continuing.*marker6 \\(\\).*" \
"continue after trigger static local watch"
gdb_test "info break" ".*watchpoint.*static_b.*" \
"static local watch did not self-delete"
# We should be in "recurser" now. Test a watch of a stack-
# based local. Symbols mentioned in a watchpoint are bound
# at watchpoint-creation. Thus, a watch of a stack-based
# local to a recursing function should be bound only to that
# one invocation, and should not trigger for other invocations.
#
gdb_test "tbreak recurser" ".*Breakpoint.*"
gdb_test "cont" "Continuing.*recurser.*"
gdb_test "watch local_x" ".*\[Ww\]atchpoint \[0-9\]*: local_x" \
"set local watch in recursive call"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: local_x.*New value = 2.*" \
"trigger local watch in recursive call"
gdb_test "cont" "Continuing.*\[Ww\]atchpoint .* deleted because the program has left the block in.*which its expression is valid.*" \
"self-delete local watch in recursive call"
1999-04-16 01:35:26 +00:00
# Disable everything so we can finish the program at full speed
gdb_test "disable" "" "disable in test_complex_watchpoint"
if [target_info exists gdb,noresults] { return }
1999-06-28 16:06:02 +00:00
gdb_continue_to_end "continue to exit in test_complex_watchpoint"
1999-04-16 01:35:26 +00:00
}
}
2003-03-17 19:51:58 +00:00
proc test_watchpoint_and_breakpoint {} {
global gdb_prompt
# This is a test for PR gdb/38, which involves setting a
# watchpoint right after you've reached a breakpoint.
if [runto func3] then {
gdb_breakpoint [gdb_get_line_number "second x assignment"]
gdb_continue_to_breakpoint "second x assignment"
gdb_test "watch x" ".*atchpoint \[0-9\]+: x"
gdb_test_multiple "next" "next after watch x" {
-re ".*atchpoint \[0-9\]+: x\r\n\r\nOld value = 0\r\nNew value = 1\r\n.*$gdb_prompt $" {
pass "next after watch x"
}
-re "\[0-9\]+\[\t \]+y = 1;\r\n$gdb_prompt $" {
kfail "gdb/38" "next after watch x"
}
}
}
}
1999-04-16 01:35:26 +00:00
# Start with a fresh gdb.
1999-06-28 16:06:02 +00:00
gdb_exit
1999-04-16 01:35:26 +00:00
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load $binfile
2002-02-13 17:40:42 +00:00
set prev_timeout $timeout
1999-04-16 01:35:26 +00:00
set timeout 600
verbose "Timeout now 600 sec.\n"
if [initialize] then {
test_simple_watchpoint
# The IDT/sim monitor only has 8 (!) open files, of which it uses
# 4 (!). So we have to make sure one program exits before
# starting another one.
if [istarget "mips-idt-*"] then {
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load $binfile
initialize
}
test_disabling_watchpoints
# See above.
if [istarget "mips-idt-*"] then {
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load $binfile
initialize
}
if ![target_info exists gdb,cannot_call_functions] {
test_stepping
# See above.
if [istarget "mips-idt-*"] then {
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load $binfile
initialize
}
}
# Only enabled for some targets merely because it has not been tested
# elsewhere.
# On sparc-sun-sunos4.1.3, GDB was running all the way to the marker4
# breakpoint before stopping for the watchpoint. I don't know why.
if {[istarget "hppa*-*-*"]} then {
test_watchpoint_triggered_in_syscall
}
# See above.
if [istarget "mips-idt-*"] then {
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load $binfile
initialize
}
# Only enabled for some targets merely because it has not been tested
# elsewhere.
if {[istarget "hppa*-*-*"] || \
[istarget "sparc*-*-sunos*"] || \
[istarget "m32r-*-*"]} then {
test_complex_watchpoint
}
1999-06-28 16:06:02 +00:00
# Verify that a user can force GDB to use "slow" watchpoints.
# (This proves rather little on kernels that don't support
# fast watchpoints, but still...)
#
if ![runto_main] then { fail "watch tests suppressed" }
send_gdb "set can-use-hw-watchpoints 0\n"
gdb_expect {
-re "$gdb_prompt $"\
{pass "disable fast watches"}
timeout {fail "(timeout) disable fast watches"}
}
send_gdb "show can-use-hw-watchpoints\n"
gdb_expect {
-re "Debugger's willingness to use watchpoint hardware is 0.*$gdb_prompt $"\
{pass "show disable fast watches"}
-re "$gdb_prompt $"\
{fail "show disable fast watches"}
timeout {fail "(timeout) show disable fast watches"}
}
send_gdb "watch ival3 if count > 1\n"
gdb_expect {
-re "Watchpoint \[0-9\]*: ival3.*$gdb_prompt $"\
{pass "set slow conditional watch"}
-re "$gdb_prompt $"\
{fail "set slow conditional watch"}
timeout {fail "(timeout) set slow conditional watch"}
}
send_gdb "continue\n"
gdb_expect {
-re "Watchpoint \[0-9\]*: ival3.*Old value = 1.*New value = 2.*$gdb_prompt $"\
{pass "trigger slow conditional watch"}
-re "$gdb_prompt $"\
{fail "trigger slow conditional watch"}
timeout {fail "(timeout) trigger slow conditional watch"}
}
# We've explicitly disabled hardware watches. Verify that GDB
2007-03-02 22:11:15 +00:00
# refrains from using them.
1999-06-28 16:06:02 +00:00
#
send_gdb "rwatch ival3\n"
gdb_expect {
-re "Expression cannot be implemented with read/access watchpoint..*$gdb_prompt $"\
{pass "rwatch disallowed when can-set-hw-watchpoints cleared"}
-re "$gdb_prompt $"\
{fail "rwatch disallowed when can-set-hw-watchpoints cleared"}
timeout {fail "(timeout) rwatch disallowed when can-use-hw-watchpoints cleared"}
}
# Read- and access watchpoints are unsupported on HP-UX. Verify
# that GDB gracefully responds to requests to create them.
#
if [istarget "hppa*-*-hpux*"] then {
send_gdb "set can-use-hw-watchpoints 1\n"
gdb_expect {
-re "$gdb_prompt $"\
{pass "enable fast watches"}
timeout {fail "(timeout) enable fast watches"}
}
send_gdb "rwatch ival3\n"
gdb_expect {
-re "Target does not have this type of hardware watchpoint support.*$gdb_prompt $"\
{pass "read watches disallowed"}
-re "$gdb_prompt $"\
{fail "read watches disallowed"}
timeout {fail "(timeout) read watches disallowed"}
}
send_gdb "awatch ival3\n"
gdb_expect {
-re "Target does not have this type of hardware watchpoint support.*$gdb_prompt $"\
{pass "access watches disallowed"}
-re "$gdb_prompt $"\
{fail "access watches disallowed"}
timeout {fail "(timeout) access watches disallowed"}
}
}
2003-03-17 19:51:58 +00:00
# See above.
if [istarget "mips-idt-*"] then {
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load $binfile
initialize
}
test_watchpoint_and_breakpoint
1999-04-16 01:35:26 +00:00
}
2002-02-13 17:40:42 +00:00
# Restore old timeout
set timeout $prev_timeout
verbose "Timeout now $timeout sec.\n"