Extended-remote exec test
This patch updates several exec-related tests and some of the library
functions in order to get them running with extended-remote. There were
three changes that were required, as follows:
In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
to reset the state of the debugger between tests. This sets 'remote
exec-file' to execute the correct binary file in each subsequent test.
In gdb.base/pie-execl.exp, there is an expect statement with an expression
that is used to match output from both gdb and the program under debug.
For the remote target, this had to be split into two expressions, using
$inferior_spawn_id to match the output from the program.
Because I had encountered problems with extended-remote exec events in
non-stop mode in my manual testing, I added non-stop testing to the
non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote
targets, it is necessary to 'set non-stop on' after gdb has started, but
before it connects to gdbserver. This is done using 'save_vars' to set
non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec.c: Add copyright header. Fix
formatting issues.
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Use clean_restart in place of zap_session,
and for test initialization. Fix formatting issues. Use
fail in place of perror.
* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
an expect statement to match an expression with output from
the program under debug.
* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
non-stop tests and pass stop mode argument to clean_restart.
Use save_vars to enable non-stop in GDBFLAGS.
* gdb.threads/non-ldr-exc-2.exp: Likewise.
* gdb.threads/non-ldr-exc-3.exp: Likewise.
* gdb.threads/non-ldr-exc-4.exp: Likewise.
2015-09-11 18:06:02 +00:00
|
|
|
/* This test program is part of GDB, the GNU debugger.
|
|
|
|
|
|
|
|
Copyright 1997-2015 Free Software Foundation, Inc.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
1999-06-28 23:04:32 +00:00
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <unistd.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
Extended-remote exec test
This patch updates several exec-related tests and some of the library
functions in order to get them running with extended-remote. There were
three changes that were required, as follows:
In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
to reset the state of the debugger between tests. This sets 'remote
exec-file' to execute the correct binary file in each subsequent test.
In gdb.base/pie-execl.exp, there is an expect statement with an expression
that is used to match output from both gdb and the program under debug.
For the remote target, this had to be split into two expressions, using
$inferior_spawn_id to match the output from the program.
Because I had encountered problems with extended-remote exec events in
non-stop mode in my manual testing, I added non-stop testing to the
non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote
targets, it is necessary to 'set non-stop on' after gdb has started, but
before it connects to gdbserver. This is done using 'save_vars' to set
non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec.c: Add copyright header. Fix
formatting issues.
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Use clean_restart in place of zap_session,
and for test initialization. Fix formatting issues. Use
fail in place of perror.
* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
an expect statement to match an expression with output from
the program under debug.
* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
non-stop tests and pass stop mode argument to clean_restart.
Use save_vars to enable non-stop in GDBFLAGS.
* gdb.threads/non-ldr-exc-2.exp: Likewise.
* gdb.threads/non-ldr-exc-3.exp: Likewise.
* gdb.threads/non-ldr-exc-4.exp: Likewise.
2015-09-11 18:06:02 +00:00
|
|
|
int global_i = 100;
|
1999-06-28 23:04:32 +00:00
|
|
|
|
|
|
|
int main (void)
|
|
|
|
{
|
Extended-remote exec test
This patch updates several exec-related tests and some of the library
functions in order to get them running with extended-remote. There were
three changes that were required, as follows:
In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
to reset the state of the debugger between tests. This sets 'remote
exec-file' to execute the correct binary file in each subsequent test.
In gdb.base/pie-execl.exp, there is an expect statement with an expression
that is used to match output from both gdb and the program under debug.
For the remote target, this had to be split into two expressions, using
$inferior_spawn_id to match the output from the program.
Because I had encountered problems with extended-remote exec events in
non-stop mode in my manual testing, I added non-stop testing to the
non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote
targets, it is necessary to 'set non-stop on' after gdb has started, but
before it connects to gdbserver. This is done using 'save_vars' to set
non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec.c: Add copyright header. Fix
formatting issues.
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Use clean_restart in place of zap_session,
and for test initialization. Fix formatting issues. Use
fail in place of perror.
* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
an expect statement to match an expression with output from
the program under debug.
* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
non-stop tests and pass stop mode argument to clean_restart.
Use save_vars to enable non-stop in GDBFLAGS.
* gdb.threads/non-ldr-exc-2.exp: Likewise.
* gdb.threads/non-ldr-exc-3.exp: Likewise.
* gdb.threads/non-ldr-exc-4.exp: Likewise.
2015-09-11 18:06:02 +00:00
|
|
|
int local_j = global_i + 1;
|
|
|
|
int local_k = local_j + 1;
|
1999-06-28 23:04:32 +00:00
|
|
|
|
|
|
|
printf ("foll-exec is about to execlp(execd-prog)...\n");
|
|
|
|
|
2013-10-18 20:00:44 +00:00
|
|
|
execlp (BASEDIR "/execd-prog",
|
Extended-remote exec test
This patch updates several exec-related tests and some of the library
functions in order to get them running with extended-remote. There were
three changes that were required, as follows:
In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
to reset the state of the debugger between tests. This sets 'remote
exec-file' to execute the correct binary file in each subsequent test.
In gdb.base/pie-execl.exp, there is an expect statement with an expression
that is used to match output from both gdb and the program under debug.
For the remote target, this had to be split into two expressions, using
$inferior_spawn_id to match the output from the program.
Because I had encountered problems with extended-remote exec events in
non-stop mode in my manual testing, I added non-stop testing to the
non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote
targets, it is necessary to 'set non-stop on' after gdb has started, but
before it connects to gdbserver. This is done using 'save_vars' to set
non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec.c: Add copyright header. Fix
formatting issues.
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Use clean_restart in place of zap_session,
and for test initialization. Fix formatting issues. Use
fail in place of perror.
* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
an expect statement to match an expression with output from
the program under debug.
* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
non-stop tests and pass stop mode argument to clean_restart.
Use save_vars to enable non-stop in GDBFLAGS.
* gdb.threads/non-ldr-exc-2.exp: Likewise.
* gdb.threads/non-ldr-exc-3.exp: Likewise.
* gdb.threads/non-ldr-exc-4.exp: Likewise.
2015-09-11 18:06:02 +00:00
|
|
|
BASEDIR "/execd-prog",
|
|
|
|
"execlp arg1 from foll-exec",
|
|
|
|
(char *) 0);
|
1999-06-28 23:04:32 +00:00
|
|
|
|
|
|
|
printf ("foll-exec is about to execl(execd-prog)...\n");
|
|
|
|
|
2014-10-24 11:04:56 +00:00
|
|
|
execl (BASEDIR "/execd-prog", /* tbreak-execl */
|
Extended-remote exec test
This patch updates several exec-related tests and some of the library
functions in order to get them running with extended-remote. There were
three changes that were required, as follows:
In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
to reset the state of the debugger between tests. This sets 'remote
exec-file' to execute the correct binary file in each subsequent test.
In gdb.base/pie-execl.exp, there is an expect statement with an expression
that is used to match output from both gdb and the program under debug.
For the remote target, this had to be split into two expressions, using
$inferior_spawn_id to match the output from the program.
Because I had encountered problems with extended-remote exec events in
non-stop mode in my manual testing, I added non-stop testing to the
non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote
targets, it is necessary to 'set non-stop on' after gdb has started, but
before it connects to gdbserver. This is done using 'save_vars' to set
non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec.c: Add copyright header. Fix
formatting issues.
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Use clean_restart in place of zap_session,
and for test initialization. Fix formatting issues. Use
fail in place of perror.
* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
an expect statement to match an expression with output from
the program under debug.
* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
non-stop tests and pass stop mode argument to clean_restart.
Use save_vars to enable non-stop in GDBFLAGS.
* gdb.threads/non-ldr-exc-2.exp: Likewise.
* gdb.threads/non-ldr-exc-3.exp: Likewise.
* gdb.threads/non-ldr-exc-4.exp: Likewise.
2015-09-11 18:06:02 +00:00
|
|
|
BASEDIR "/execd-prog",
|
|
|
|
"execl arg1 from foll-exec",
|
|
|
|
"execl arg2 from foll-exec",
|
|
|
|
(char *) 0);
|
1999-06-28 23:04:32 +00:00
|
|
|
|
|
|
|
{
|
|
|
|
static char * argv[] = {
|
Extended-remote exec test
This patch updates several exec-related tests and some of the library
functions in order to get them running with extended-remote. There were
three changes that were required, as follows:
In gdb.base/foll-exec.exp, use 'clean_start' in place of proc 'zap_session'
to reset the state of the debugger between tests. This sets 'remote
exec-file' to execute the correct binary file in each subsequent test.
In gdb.base/pie-execl.exp, there is an expect statement with an expression
that is used to match output from both gdb and the program under debug.
For the remote target, this had to be split into two expressions, using
$inferior_spawn_id to match the output from the program.
Because I had encountered problems with extended-remote exec events in
non-stop mode in my manual testing, I added non-stop testing to the
non-ldr-exc-[1234].exp tests. In order to set non-stop mode for remote
targets, it is necessary to 'set non-stop on' after gdb has started, but
before it connects to gdbserver. This is done using 'save_vars' to set
non-stop mode in GDBFLAGS, so GDB sets non-stop mode on startup.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec.c: Add copyright header. Fix
formatting issues.
* gdb.base/foll-exec.exp (zap_session): Delete proc.
(do_exec_tests): Use clean_restart in place of zap_session,
and for test initialization. Fix formatting issues. Use
fail in place of perror.
* gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
an expect statement to match an expression with output from
the program under debug.
* gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
non-stop tests and pass stop mode argument to clean_restart.
Use save_vars to enable non-stop in GDBFLAGS.
* gdb.threads/non-ldr-exc-2.exp: Likewise.
* gdb.threads/non-ldr-exc-3.exp: Likewise.
* gdb.threads/non-ldr-exc-4.exp: Likewise.
2015-09-11 18:06:02 +00:00
|
|
|
(char *) BASEDIR "/execd-prog",
|
|
|
|
(char *) "execv arg1 from foll-exec",
|
|
|
|
(char *) 0};
|
1999-06-28 23:04:32 +00:00
|
|
|
|
|
|
|
printf ("foll-exec is about to execv(execd-prog)...\n");
|
|
|
|
|
2014-10-24 11:04:56 +00:00
|
|
|
execv (BASEDIR "/execd-prog", argv); /* tbreak-execv */
|
1999-06-28 23:04:32 +00:00
|
|
|
}
|
|
|
|
}
|